9 files changed, 7 insertions, 119 deletions
diff --git a/keyboards/edi/hardlight/mk1/config.h b/keyboards/edi/hardlight/mk1/config.h
index 56fe9e4624..5d074c2e4a 100644
--- a/keyboards/edi/hardlight/mk1/config.h
+++ b/keyboards/edi/hardlight/mk1/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 8
 
 /*
  * Keyboard Matrix Assignments
@@ -40,17 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-// #define BACKLIGHT_PIN C7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -81,30 +65,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  * Enable Audio Subsystem with two voices
  */
 // #define AUDIO_PIN C6
-
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
diff --git a/keyboards/edi/hardlight/mk1/info.json b/keyboards/edi/hardlight/mk1/info.json
index e8daa42a1c..7849eae7ca 100644
--- a/keyboards/edi/hardlight/mk1/info.json
+++ b/keyboards/edi/hardlight/mk1/info.json
@@ -6,6 +6,8 @@
         "pid": "0x2401",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu"
     "layouts": {
         "LAYOUT_ortho_4x16": {
             "layout": [
diff --git a/keyboards/edi/hardlight/mk1/rules.mk b/keyboards/edi/hardlight/mk1/rules.mk
index cb90be7699..1763386b87 100644
--- a/keyboards/edi/hardlight/mk1/rules.mk
+++ b/keyboards/edi/hardlight/mk1/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/edi/hardlight/mk2/config.h b/keyboards/edi/hardlight/mk2/config.h
index fe6d96b613..c140a7bad5 100644
--- a/keyboards/edi/hardlight/mk2/config.h
+++ b/keyboards/edi/hardlight/mk2/config.h
@@ -17,20 +17,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 8
-
 #define MATRIX_COL_PINS { B2, B6, B5, F1, F0, C15, C14, C13 }
 #define MATRIX_ROW_PINS { B10, B11, A14, A15, A3, A0, A2, A1 }
 #define DIODE_DIRECTION COL2ROW
 
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/edi/hardlight/mk2/info.json b/keyboards/edi/hardlight/mk2/info.json
index 5d09a0f296..aff84f1e32 100644
--- a/keyboards/edi/hardlight/mk2/info.json
+++ b/keyboards/edi/hardlight/mk2/info.json
@@ -6,6 +6,9 @@
         "pid": "0x2408",
         "device_version": "0.0.7"
     },
+    "processor": "STM32F072",
+    "bootloader": "stm32-dfu",
+    "community_layouts": ["ortho_4x16"],
     "layouts": {
         "LAYOUT_ortho_4x16": {
             "layout": [
diff --git a/keyboards/edi/hardlight/mk2/rules.mk b/keyboards/edi/hardlight/mk2/rules.mk
index 3ee5e5a9c4..aad4915dd6 100644
--- a/keyboards/edi/hardlight/mk2/rules.mk
+++ b/keyboards/edi/hardlight/mk2/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32F072
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Wildcard to allow APM32 MCU
 DFU_SUFFIX_ARGS = -v FFFF -p FFFF
 
@@ -23,8 +17,5 @@ VELOCIKEY_ENABLE = yes
 KEY_LOCK_ENABLE = yes
 WS2812_DRIVER = pwm
 
-# Layout definitions
-LAYOUTS = ortho_4x16
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
diff --git a/keyboards/edi/standaside/config.h b/keyboards/edi/standaside/config.h
index e3786a57fa..df40d532f8 100644
--- a/keyboards/edi/standaside/config.h
+++ b/keyboards/edi/standaside/config.h
@@ -2,11 +2,6 @@
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 8
 
 /*
  * Keyboard Matrix Assignments
@@ -25,19 +20,6 @@
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-// #define BACKLIGHT_PIN C7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -59,33 +41,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/edi/standaside/info.json b/keyboards/edi/standaside/info.json
index 464b5b1c84..95d3e6d6ee 100644
--- a/keyboards/edi/standaside/info.json
+++ b/keyboards/edi/standaside/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0412",
         "device_version": "0.0.3"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_ortho_4x16": {
             "layout": [
diff --git a/keyboards/edi/standaside/rules.mk b/keyboards/edi/standaside/rules.mk
index 8e4bcc5f9b..8dd3faf689 100644
--- a/keyboards/edi/standaside/rules.mk
+++ b/keyboards/edi/standaside/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #