diff options
Diffstat (limited to 'keyboards/dztech')
36 files changed, 195 insertions, 350 deletions
diff --git a/keyboards/dztech/bocc/config.h b/keyboards/dztech/bocc/config.h index e93336086c..b6b02cd5ec 100644 --- a/keyboards/dztech/bocc/config.h +++ b/keyboards/dztech/bocc/config.h @@ -15,23 +15,6 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { B0, B1, B2, B3, F0 } -#define MATRIX_COL_PINS { B5, B6, C6, C7, F7, F6, F5, F4, F1, D1, D2, D3, D5, D4, D6, D7, B4 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #define RGB_DI_PIN E2 #ifdef RGB_DI_PIN # define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/dztech/bocc/info.json b/keyboards/dztech/bocc/info.json index 87073419ab..eaed62fef5 100644 --- a/keyboards/dztech/bocc/info.json +++ b/keyboards/dztech/bocc/info.json @@ -8,6 +8,11 @@ "pid": "0x1010", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4"], + "rows": ["B0", "B1", "B2", "B3", "F0"] + }, + "diode_direction": "COL2ROW", "backlight": { "pin": "B7", "levels": 5 diff --git a/keyboards/dztech/duo_s/config.h b/keyboards/dztech/duo_s/config.h index e74f584c91..419464662b 100644 --- a/keyboards/dztech/duo_s/config.h +++ b/keyboards/dztech/duo_s/config.h @@ -16,12 +16,6 @@ #pragma once - -#define MATRIX_ROW_PINS { A15, B3, B4, B5, B11 } -#define MATRIX_COL_PINS { B12, B13, B14, A8, B9, C13, C14, C15, A1, A2, A3, A4, A5, A6, A7 } -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #define RGB_DI_PIN B15 #ifdef RGB_DI_PIN #define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/dztech/duo_s/info.json b/keyboards/dztech/duo_s/info.json index 54672e21ae..36dc05b3c9 100644 --- a/keyboards/dztech/duo_s/info.json +++ b/keyboards/dztech/duo_s/info.json @@ -8,6 +8,11 @@ "pid": "0x1012", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["B12", "B13", "B14", "A8", "B9", "C13", "C14", "C15", "A1", "A2", "A3", "A4", "A5", "A6", "A7"], + "rows": ["A15", "B3", "B4", "B5", "B11"] + }, + "diode_direction": "COL2ROW", "processor": "STM32F303", "bootloader": "stm32-dfu", "community_layouts": ["65_ansi_blocker"], diff --git a/keyboards/dztech/dz60rgb/v1/config.h b/keyboards/dztech/dz60rgb/v1/config.h index dded682184..82d7b6d1e1 100644 --- a/keyboards/dztech/dz60rgb/v1/config.h +++ b/keyboards/dztech/dz60rgb/v1/config.h @@ -1,21 +1,5 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } -#define MATRIX_COL_PINS { A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/dztech/dz60rgb/v1/info.json b/keyboards/dztech/dz60rgb/v1/info.json index d693e44ecb..68b332c9cd 100644 --- a/keyboards/dztech/dz60rgb/v1/info.json +++ b/keyboards/dztech/dz60rgb/v1/info.json @@ -3,6 +3,11 @@ "pid": "0x1120", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["A6", "A7", "B0", "B13", "B15", "A8", "A15", "B3", "B4", "B5", "B8", "B9", "C13", "C14"], + "rows": ["B1", "B10", "B11", "B14", "B12"] + }, + "diode_direction": "COL2ROW", "processor": "STM32F303", "bootloader": "stm32-dfu", "board": "QMK_PROTON_C", diff --git a/keyboards/dztech/dz60rgb/v2/config.h b/keyboards/dztech/dz60rgb/v2/config.h index 9cba4b023c..094478f34d 100644 --- a/keyboards/dztech/dz60rgb/v2/config.h +++ b/keyboards/dztech/dz60rgb/v2/config.h @@ -1,21 +1,5 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 } -#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/dztech/dz60rgb/v2/info.json b/keyboards/dztech/dz60rgb/v2/info.json index ddd9fadd3a..3553fab9b2 100644 --- a/keyboards/dztech/dz60rgb/v2/info.json +++ b/keyboards/dztech/dz60rgb/v2/info.json @@ -3,6 +3,11 @@ "pid": "0x1121", "device_version": "2.0.0" }, + "matrix_pins": { + "cols": ["C7", "F7", "F6", "F0", "B0", "B1", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B7"], + "rows": ["F5", "F4", "F1", "B3", "B2"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "debounce": 3 diff --git a/keyboards/dztech/dz60rgb/v2_1/config.h b/keyboards/dztech/dz60rgb/v2_1/config.h index 1f3dc86b62..a753832ed1 100644 --- a/keyboards/dztech/dz60rgb/v2_1/config.h +++ b/keyboards/dztech/dz60rgb/v2_1/config.h @@ -16,22 +16,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 } -#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/dztech/dz60rgb/v2_1/info.json b/keyboards/dztech/dz60rgb/v2_1/info.json index 88618d3745..89e4532160 100644 --- a/keyboards/dztech/dz60rgb/v2_1/info.json +++ b/keyboards/dztech/dz60rgb/v2_1/info.json @@ -3,6 +3,11 @@ "pid": "0x1121", "device_version": "2.1.0" }, + "matrix_pins": { + "cols": ["C7", "F7", "F6", "F0", "B0", "B1", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B7"], + "rows": ["F5", "F4", "F1", "B3", "B2"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "lufa-ms", "debounce": 3 diff --git a/keyboards/dztech/dz60rgb_ansi/v1/config.h b/keyboards/dztech/dz60rgb_ansi/v1/config.h index 2f7c1cad19..5405d671a5 100644 --- a/keyboards/dztech/dz60rgb_ansi/v1/config.h +++ b/keyboards/dztech/dz60rgb_ansi/v1/config.h @@ -1,21 +1,5 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } -#define MATRIX_COL_PINS { A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/dztech/dz60rgb_ansi/v1/info.json b/keyboards/dztech/dz60rgb_ansi/v1/info.json index 5dcb042f96..377c8cd036 100644 --- a/keyboards/dztech/dz60rgb_ansi/v1/info.json +++ b/keyboards/dztech/dz60rgb_ansi/v1/info.json @@ -3,6 +3,11 @@ "pid": "0x1220", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["A6", "A7", "B0", "B13", "B15", "A8", "A15", "B3", "B4", "B5", "B8", "B9", "C13", "C14"], + "rows": ["B1", "B10", "B11", "B14", "B12"] + }, + "diode_direction": "COL2ROW", "processor": "STM32F303", "bootloader": "stm32-dfu", "board": "QMK_PROTON_C", diff --git a/keyboards/dztech/dz60rgb_ansi/v2/config.h b/keyboards/dztech/dz60rgb_ansi/v2/config.h index 5b08f5994c..545aa64eea 100644 --- a/keyboards/dztech/dz60rgb_ansi/v2/config.h +++ b/keyboards/dztech/dz60rgb_ansi/v2/config.h @@ -1,21 +1,5 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 } -#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/dztech/dz60rgb_ansi/v2/info.json b/keyboards/dztech/dz60rgb_ansi/v2/info.json index 42d21e8931..52070e8996 100644 --- a/keyboards/dztech/dz60rgb_ansi/v2/info.json +++ b/keyboards/dztech/dz60rgb_ansi/v2/info.json @@ -3,6 +3,11 @@ "pid": "0x1221", "device_version": "2.0.0" }, + "matrix_pins": { + "cols": ["C7", "F7", "F6", "F0", "B0", "B1", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B7"], + "rows": ["F5", "F4", "F1", "B3", "B2"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "debounce": 3 diff --git a/keyboards/dztech/dz60rgb_ansi/v2_1/config.h b/keyboards/dztech/dz60rgb_ansi/v2_1/config.h index 8d4766eb81..09e76f52d5 100644 --- a/keyboards/dztech/dz60rgb_ansi/v2_1/config.h +++ b/keyboards/dztech/dz60rgb_ansi/v2_1/config.h @@ -16,22 +16,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 } -#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended // # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/dztech/dz60rgb_ansi/v2_1/info.json b/keyboards/dztech/dz60rgb_ansi/v2_1/info.json index 4bdb295eca..d18a84790d 100644 --- a/keyboards/dztech/dz60rgb_ansi/v2_1/info.json +++ b/keyboards/dztech/dz60rgb_ansi/v2_1/info.json @@ -3,6 +3,11 @@ "pid": "0x1221", "device_version": "2.1.0" }, + "matrix_pins": { + "cols": ["C7", "F7", "F6", "F0", "B0", "B1", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B7"], + "rows": ["F5", "F4", "F1", "B3", "B2"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "lufa-ms", "debounce": 3 diff --git a/keyboards/dztech/dz60rgb_wkl/v1/config.h b/keyboards/dztech/dz60rgb_wkl/v1/config.h index 0381423ee7..cfe82a7323 100644 --- a/keyboards/dztech/dz60rgb_wkl/v1/config.h +++ b/keyboards/dztech/dz60rgb_wkl/v1/config.h @@ -1,21 +1,5 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } -#define MATRIX_COL_PINS { A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/dztech/dz60rgb_wkl/v1/info.json b/keyboards/dztech/dz60rgb_wkl/v1/info.json index 511a797a5c..278c245871 100644 --- a/keyboards/dztech/dz60rgb_wkl/v1/info.json +++ b/keyboards/dztech/dz60rgb_wkl/v1/info.json @@ -3,6 +3,11 @@ "pid": "0x1320", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["A6", "A7", "B0", "B13", "B15", "A8", "A15", "B3", "B4", "B5", "B8", "B9", "C13", "C14"], + "rows": ["B1", "B10", "B11", "B14", "B12"] + }, + "diode_direction": "COL2ROW", "processor": "STM32F303", "bootloader": "stm32-dfu", "board": "QMK_PROTON_C", diff --git a/keyboards/dztech/dz60rgb_wkl/v2/config.h b/keyboards/dztech/dz60rgb_wkl/v2/config.h index e5f3d86e23..38a1aa2c76 100644 --- a/keyboards/dztech/dz60rgb_wkl/v2/config.h +++ b/keyboards/dztech/dz60rgb_wkl/v2/config.h @@ -1,21 +1,5 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 } -#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/dztech/dz60rgb_wkl/v2/info.json b/keyboards/dztech/dz60rgb_wkl/v2/info.json index 3bd3a96b8e..1265608dbc 100644 --- a/keyboards/dztech/dz60rgb_wkl/v2/info.json +++ b/keyboards/dztech/dz60rgb_wkl/v2/info.json @@ -3,6 +3,11 @@ "pid": "0x1321", "device_version": "2.0.0" }, + "matrix_pins": { + "cols": ["C7", "F7", "F6", "F0", "B0", "B1", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B7"], + "rows": ["F5", "F4", "F1", "B3", "B2"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "debounce": 3 diff --git a/keyboards/dztech/dz60rgb_wkl/v2_1/config.h b/keyboards/dztech/dz60rgb_wkl/v2_1/config.h index bbc52f701a..5bcfb21cf7 100644 --- a/keyboards/dztech/dz60rgb_wkl/v2_1/config.h +++ b/keyboards/dztech/dz60rgb_wkl/v2_1/config.h @@ -16,22 +16,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 } -#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/dztech/dz60rgb_wkl/v2_1/info.json b/keyboards/dztech/dz60rgb_wkl/v2_1/info.json index 4eb2b1eca0..bd9e24e880 100644 --- a/keyboards/dztech/dz60rgb_wkl/v2_1/info.json +++ b/keyboards/dztech/dz60rgb_wkl/v2_1/info.json @@ -3,6 +3,11 @@ "pid": "0x1321", "device_version": "2.1.0" }, + "matrix_pins": { + "cols": ["C7", "F7", "F6", "F0", "B0", "B1", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B7"], + "rows": ["F5", "F4", "F1", "B3", "B2"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "lufa-ms", "debounce": 3 diff --git a/keyboards/dztech/dz64rgb/config.h b/keyboards/dztech/dz64rgb/config.h index c212f41c91..43e1b1c609 100644 --- a/keyboards/dztech/dz64rgb/config.h +++ b/keyboards/dztech/dz64rgb/config.h @@ -16,11 +16,6 @@ #pragma once -#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 } -#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 } - -#define DIODE_DIRECTION COL2ROW - #define USB_SUSPEND_WAKEUP_DELAY 5000 #ifdef RGB_MATRIX_ENABLE diff --git a/keyboards/dztech/dz64rgb/info.json b/keyboards/dztech/dz64rgb/info.json index efae138c1e..14d9c0122b 100644 --- a/keyboards/dztech/dz64rgb/info.json +++ b/keyboards/dztech/dz64rgb/info.json @@ -8,6 +8,11 @@ "pid": "0x1013", "device_version": "0.0.2" }, + "matrix_pins": { + "cols": ["C7", "F7", "F6", "F0", "B0", "B1", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B7"], + "rows": ["F5", "F4", "F1", "B3", "B2"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "lufa-ms", "layouts": { diff --git a/keyboards/dztech/dz65rgb/v1/config.h b/keyboards/dztech/dz65rgb/v1/config.h index 005b8096ea..4a84498975 100644 --- a/keyboards/dztech/dz65rgb/v1/config.h +++ b/keyboards/dztech/dz65rgb/v1/config.h @@ -15,22 +15,6 @@ */ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } -#define MATRIX_COL_PINS { A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14, C15 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_LED_PROCESS_LIMIT 4 # define RGB_MATRIX_LED_FLUSH_LIMIT 26 diff --git a/keyboards/dztech/dz65rgb/v1/info.json b/keyboards/dztech/dz65rgb/v1/info.json index 9e88a65fe4..761d31ffb7 100644 --- a/keyboards/dztech/dz65rgb/v1/info.json +++ b/keyboards/dztech/dz65rgb/v1/info.json @@ -3,6 +3,11 @@ "pid": "0x1420", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["A6", "A7", "B0", "B13", "B15", "A8", "A15", "B3", "B4", "B5", "B8", "B9", "C13", "C14", "C15"], + "rows": ["B1", "B10", "B11", "B14", "B12"] + }, + "diode_direction": "COL2ROW", "processor": "STM32F303", "bootloader": "stm32-dfu", "board": "QMK_PROTON_C", diff --git a/keyboards/dztech/dz65rgb/v2/config.h b/keyboards/dztech/dz65rgb/v2/config.h index dd993ae7a9..04700c84ed 100644 --- a/keyboards/dztech/dz65rgb/v2/config.h +++ b/keyboards/dztech/dz65rgb/v2/config.h @@ -15,22 +15,6 @@ */ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { F0, F1, F4, E6, C6 } -#define MATRIX_COL_PINS { F7, F6, F5, C7, B0, B1, B2, B3, B4, D7, D6, D4, D5, D3, D2 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_LED_PROCESS_LIMIT 4 # define RGB_MATRIX_LED_FLUSH_LIMIT 26 diff --git a/keyboards/dztech/dz65rgb/v2/info.json b/keyboards/dztech/dz65rgb/v2/info.json index 502b498e92..332acae14d 100644 --- a/keyboards/dztech/dz65rgb/v2/info.json +++ b/keyboards/dztech/dz65rgb/v2/info.json @@ -3,6 +3,11 @@ "pid": "0x1421", "device_version": "2.0.0" }, + "matrix_pins": { + "cols": ["F7", "F6", "F5", "C7", "B0", "B1", "B2", "B3", "B4", "D7", "D6", "D4", "D5", "D3", "D2"], + "rows": ["F0", "F1", "F4", "E6", "C6"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "debounce": 3 diff --git a/keyboards/dztech/dz65rgb/v3/config.h b/keyboards/dztech/dz65rgb/v3/config.h index 69a6f5c50f..421ae8277c 100755 --- a/keyboards/dztech/dz65rgb/v3/config.h +++ b/keyboards/dztech/dz65rgb/v3/config.h @@ -16,13 +16,6 @@ #pragma once - -#define MATRIX_ROW_PINS { F0, F1, F4, E6, C6 } -#define MATRIX_COL_PINS { F7, F6, F5, C7, B0, B1, B2, B3, B4, D7, D6, D4, D5, D3, D2} - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define USB_SUSPEND_WAKEUP_DELAY 5000 diff --git a/keyboards/dztech/dz65rgb/v3/info.json b/keyboards/dztech/dz65rgb/v3/info.json index 4d46faea48..d40193459d 100644 --- a/keyboards/dztech/dz65rgb/v3/info.json +++ b/keyboards/dztech/dz65rgb/v3/info.json @@ -3,6 +3,11 @@ "pid": "0x1424", "device_version": "3.0.0" }, + "matrix_pins": { + "cols": ["F7", "F6", "F5", "C7", "B0", "B1", "B2", "B3", "B4", "D7", "D6", "D4", "D5", "D3", "D2"], + "rows": ["F0", "F1", "F4", "E6", "C6"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "lufa-ms" } diff --git a/keyboards/dztech/dz96/config.h b/keyboards/dztech/dz96/config.h deleted file mode 100644 index b22fdf5013..0000000000 --- a/keyboards/dztech/dz96/config.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2020 kb-elmo<mail@elmo.space> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B7, B3, E6, F0, D5, D4, D6, C7 } -#define MATRIX_COL_PINS { C6, F1, F4, F5, F6, F7, D7, B4, B5, D0, D1, D2, D3} - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/dztech/dz96/info.json b/keyboards/dztech/dz96/info.json index 1119a8f2ab..a7229ce131 100644 --- a/keyboards/dztech/dz96/info.json +++ b/keyboards/dztech/dz96/info.json @@ -8,6 +8,11 @@ "pid": "0xDB96", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["C6", "F1", "F4", "F5", "F6", "F7", "D7", "B4", "B5", "D0", "D1", "D2", "D3"], + "rows": ["B7", "B3", "E6", "F0", "D5", "D4", "D6", "C7"] + }, + "diode_direction": "COL2ROW", "backlight": { "pin": "B6", "levels": 5 diff --git a/keyboards/dztech/endless80/config.h b/keyboards/dztech/endless80/config.h index c07c913bb9..2200253ff1 100644 --- a/keyboards/dztech/endless80/config.h +++ b/keyboards/dztech/endless80/config.h @@ -15,10 +15,6 @@ */ #pragma once -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7, B5 } -#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, C6, C7, F5, F4, F1, F0 } -#define DIODE_DIRECTION COL2ROW - #define RGB_DI_PIN F7 #ifdef RGB_DI_PIN #define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/dztech/endless80/info.json b/keyboards/dztech/endless80/info.json index eb80943837..00ac43a171 100644 --- a/keyboards/dztech/endless80/info.json +++ b/keyboards/dztech/endless80/info.json @@ -8,6 +8,11 @@ "pid": "0x1015", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "C6", "C7", "F5", "F4", "F1", "F0"], + "rows": ["B0", "B1", "B2", "B3", "B7", "B5"] + }, + "diode_direction": "COL2ROW", "indicators": { "caps_lock": "E6", "on_state": 0 diff --git a/keyboards/dztech/tofu/ii/v1/info.json b/keyboards/dztech/tofu/ii/v1/info.json index b28edb717a..bce81094c2 100644 --- a/keyboards/dztech/tofu/ii/v1/info.json +++ b/keyboards/dztech/tofu/ii/v1/info.json @@ -94,72 +94,72 @@ "layouts": { "LAYOUT": { "layout": [ - { "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, - { "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, - { "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, - { "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, - { "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, - { "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, - { "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, - { "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, - { "matrix": [0, 8], "w": 1, "x": 8, "y": 0 }, - { "matrix": [0, 9], "w": 1, "x": 9, "y": 0 }, - { "matrix": [0, 10], "w": 1, "x": 10, "y": 0 }, - { "matrix": [0, 11], "w": 1, "x": 11, "y": 0 }, - { "matrix": [0, 12], "w": 1, "x": 12, "y": 0 }, + { "matrix": [0, 0], "x": 0, "y": 0 }, + { "matrix": [0, 1], "x": 1, "y": 0 }, + { "matrix": [0, 2], "x": 2, "y": 0 }, + { "matrix": [0, 3], "x": 3, "y": 0 }, + { "matrix": [0, 4], "x": 4, "y": 0 }, + { "matrix": [0, 5], "x": 5, "y": 0 }, + { "matrix": [0, 6], "x": 6, "y": 0 }, + { "matrix": [0, 7], "x": 7, "y": 0 }, + { "matrix": [0, 8], "x": 8, "y": 0 }, + { "matrix": [0, 9], "x": 9, "y": 0 }, + { "matrix": [0, 10], "x": 10, "y": 0 }, + { "matrix": [0, 11], "x": 11, "y": 0 }, + { "matrix": [0, 12], "x": 12, "y": 0 }, { "matrix": [0, 13], "w": 2, "x": 13, "y": 0 }, - { "matrix": [0, 14], "w": 1, "x": 15, "y": 0 }, + { "matrix": [0, 14], "x": 15, "y": 0 }, { "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, - { "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, - { "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, - { "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, - { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, - { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, - { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, - { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, - { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 }, - { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 }, - { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 }, - { "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 }, - { "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 }, + { "matrix": [1, 1], "x": 1.5, "y": 1 }, + { "matrix": [1, 2], "x": 2.5, "y": 1 }, + { "matrix": [1, 3], "x": 3.5, "y": 1 }, + { "matrix": [1, 4], "x": 4.5, "y": 1 }, + { "matrix": [1, 5], "x": 5.5, "y": 1 }, + { "matrix": [1, 6], "x": 6.5, "y": 1 }, + { "matrix": [1, 7], "x": 7.5, "y": 1 }, + { "matrix": [1, 8], "x": 8.5, "y": 1 }, + { "matrix": [1, 9], "x": 9.5, "y": 1 }, + { "matrix": [1, 10], "x": 10.5, "y": 1 }, + { "matrix": [1, 11], "x": 11.5, "y": 1 }, + { "matrix": [1, 12], "x": 12.5, "y": 1 }, { "matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1 }, - { "matrix": [1, 14], "w": 1, "x": 15, "y": 1 }, + { "matrix": [1, 14], "x": 15, "y": 1 }, { "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, - { "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, - { "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, - { "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, - { "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, - { "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, - { "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, - { "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, - { "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 }, - { "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 }, - { "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 }, - { "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 }, + { "matrix": [2, 1], "x": 1.75, "y": 2 }, + { "matrix": [2, 2], "x": 2.75, "y": 2 }, + { "matrix": [2, 3], "x": 3.75, "y": 2 }, + { "matrix": [2, 4], "x": 4.75, "y": 2 }, + { "matrix": [2, 5], "x": 5.75, "y": 2 }, + { "matrix": [2, 6], "x": 6.75, "y": 2 }, + { "matrix": [2, 7], "x": 7.75, "y": 2 }, + { "matrix": [2, 8], "x": 8.75, "y": 2 }, + { "matrix": [2, 9], "x": 9.75, "y": 2 }, + { "matrix": [2, 10], "x": 10.75, "y": 2 }, + { "matrix": [2, 11], "x": 11.75, "y": 2 }, { "matrix": [2, 12], "w": 2.25, "x": 12.75, "y": 2 }, - { "matrix": [2, 14], "w": 1, "x": 15, "y": 2 }, + { "matrix": [2, 14], "x": 15, "y": 2 }, { "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 }, - { "matrix": [3, 1], "w": 1, "x": 2.25, "y": 3 }, - { "matrix": [3, 2], "w": 1, "x": 3.25, "y": 3 }, - { "matrix": [3, 3], "w": 1, "x": 4.25, "y": 3 }, - { "matrix": [3, 4], "w": 1, "x": 5.25, "y": 3 }, - { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 3 }, - { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 3 }, - { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 3 }, - { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 3 }, - { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 3 }, - { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 3 }, + { "matrix": [3, 1], "x": 2.25, "y": 3 }, + { "matrix": [3, 2], "x": 3.25, "y": 3 }, + { "matrix": [3, 3], "x": 4.25, "y": 3 }, + { "matrix": [3, 4], "x": 5.25, "y": 3 }, + { "matrix": [3, 5], "x": 6.25, "y": 3 }, + { "matrix": [3, 6], "x": 7.25, "y": 3 }, + { "matrix": [3, 7], "x": 8.25, "y": 3 }, + { "matrix": [3, 8], "x": 9.25, "y": 3 }, + { "matrix": [3, 9], "x": 10.25, "y": 3 }, + { "matrix": [3, 10], "x": 11.25, "y": 3 }, { "matrix": [3, 11], "w": 1.75, "x": 12.25, "y": 3 }, - { "matrix": [3, 13], "w": 1, "x": 14, "y": 3 }, + { "matrix": [3, 13], "x": 14, "y": 3 }, { "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, { "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, { "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, { "matrix": [4, 6], "w": 6.25, "x": 3.75, "y": 4 }, { "matrix": [4, 8], "w": 1.25, "x":10, "y":4 }, { "matrix": [4, 10], "w": 1.25, "x": 11.25, "y": 4 }, - { "matrix": [4, 12], "w": 1, "x": 13, "y": 4 }, - { "matrix": [4, 13], "w": 1, "x": 14, "y": 4 }, - { "matrix": [4, 14], "w": 1, "x": 15, "y": 4 } + { "matrix": [4, 12], "x": 13, "y": 4 }, + { "matrix": [4, 13], "x": 14, "y": 4 }, + { "matrix": [4, 14], "x": 15, "y": 4 } ] } } diff --git a/keyboards/dztech/tofu/jr/v1/info.json b/keyboards/dztech/tofu/jr/v1/info.json index a786b8689d..338c040255 100644 --- a/keyboards/dztech/tofu/jr/v1/info.json +++ b/keyboards/dztech/tofu/jr/v1/info.json @@ -97,74 +97,74 @@ "layouts": { "LAYOUT_65_ansi": { "layout": [ - { "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, - { "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, - { "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, - { "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, - { "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, - { "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, - { "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, - { "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, - { "matrix": [0, 8], "w": 1, "x": 8, "y": 0 }, - { "matrix": [0, 9], "w": 1, "x": 9, "y": 0 }, - { "matrix": [0, 10], "w": 1, "x": 10, "y": 0 }, - { "matrix": [0, 11], "w": 1, "x": 11, "y": 0 }, - { "matrix": [0, 12], "w": 1, "x": 12, "y": 0 }, + { "matrix": [0, 0], "x": 0, "y": 0 }, + { "matrix": [0, 1], "x": 1, "y": 0 }, + { "matrix": [0, 2], "x": 2, "y": 0 }, + { "matrix": [0, 3], "x": 3, "y": 0 }, + { "matrix": [0, 4], "x": 4, "y": 0 }, + { "matrix": [0, 5], "x": 5, "y": 0 }, + { "matrix": [0, 6], "x": 6, "y": 0 }, + { "matrix": [0, 7], "x": 7, "y": 0 }, + { "matrix": [0, 8], "x": 8, "y": 0 }, + { "matrix": [0, 9], "x": 9, "y": 0 }, + { "matrix": [0, 10], "x": 10, "y": 0 }, + { "matrix": [0, 11], "x": 11, "y": 0 }, + { "matrix": [0, 12], "x": 12, "y": 0 }, { "matrix": [0, 13], "w": 2, "x": 13, "y": 0 }, - { "matrix": [0, 14], "w": 1, "x": 15, "y": 0 }, + { "matrix": [0, 14], "x": 15, "y": 0 }, { "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, - { "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, - { "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, - { "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, - { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, - { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, - { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, - { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, - { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 }, - { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 }, - { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 }, - { "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 }, - { "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 }, + { "matrix": [1, 1], "x": 1.5, "y": 1 }, + { "matrix": [1, 2], "x": 2.5, "y": 1 }, + { "matrix": [1, 3], "x": 3.5, "y": 1 }, + { "matrix": [1, 4], "x": 4.5, "y": 1 }, + { "matrix": [1, 5], "x": 5.5, "y": 1 }, + { "matrix": [1, 6], "x": 6.5, "y": 1 }, + { "matrix": [1, 7], "x": 7.5, "y": 1 }, + { "matrix": [1, 8], "x": 8.5, "y": 1 }, + { "matrix": [1, 9], "x": 9.5, "y": 1 }, + { "matrix": [1, 10], "x": 10.5, "y": 1 }, + { "matrix": [1, 11], "x": 11.5, "y": 1 }, + { "matrix": [1, 12], "x": 12.5, "y": 1 }, { "matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1 }, - { "matrix": [1, 14], "w": 1, "x": 15, "y": 1 }, + { "matrix": [1, 14], "x": 15, "y": 1 }, { "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, - { "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, - { "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, - { "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, - { "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, - { "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, - { "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, - { "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, - { "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 }, - { "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 }, - { "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 }, - { "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 }, + { "matrix": [2, 1], "x": 1.75, "y": 2 }, + { "matrix": [2, 2], "x": 2.75, "y": 2 }, + { "matrix": [2, 3], "x": 3.75, "y": 2 }, + { "matrix": [2, 4], "x": 4.75, "y": 2 }, + { "matrix": [2, 5], "x": 5.75, "y": 2 }, + { "matrix": [2, 6], "x": 6.75, "y": 2 }, + { "matrix": [2, 7], "x": 7.75, "y": 2 }, + { "matrix": [2, 8], "x": 8.75, "y": 2 }, + { "matrix": [2, 9], "x": 9.75, "y": 2 }, + { "matrix": [2, 10], "x": 10.75, "y": 2 }, + { "matrix": [2, 11], "x": 11.75, "y": 2 }, { "matrix": [2, 12], "w": 2.25, "x": 12.75, "y": 2 }, - { "matrix": [2, 14], "w": 1, "x": 15, "y": 2 }, + { "matrix": [2, 14], "x": 15, "y": 2 }, { "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 }, - { "matrix": [3, 1], "w": 1, "x": 2.25, "y": 3 }, - { "matrix": [3, 2], "w": 1, "x": 3.25, "y": 3 }, - { "matrix": [3, 3], "w": 1, "x": 4.25, "y": 3 }, - { "matrix": [3, 4], "w": 1, "x": 5.25, "y": 3 }, - { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 3 }, - { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 3 }, - { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 3 }, - { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 3 }, - { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 3 }, - { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 3 }, + { "matrix": [3, 1], "x": 2.25, "y": 3 }, + { "matrix": [3, 2], "x": 3.25, "y": 3 }, + { "matrix": [3, 3], "x": 4.25, "y": 3 }, + { "matrix": [3, 4], "x": 5.25, "y": 3 }, + { "matrix": [3, 5], "x": 6.25, "y": 3 }, + { "matrix": [3, 6], "x": 7.25, "y": 3 }, + { "matrix": [3, 7], "x": 8.25, "y": 3 }, + { "matrix": [3, 8], "x": 9.25, "y": 3 }, + { "matrix": [3, 9], "x": 10.25, "y": 3 }, + { "matrix": [3, 10], "x": 11.25, "y": 3 }, { "matrix": [3, 11], "w": 1.75, "x": 12.25, "y": 3 }, - { "matrix": [3, 13], "w": 1, "x": 14, "y": 3 }, - { "matrix": [3, 14], "w": 1, "x": 15, "y": 3 }, + { "matrix": [3, 13], "x": 14, "y": 3 }, + { "matrix": [3, 14], "x": 15, "y": 3 }, { "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, { "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, { "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, { "matrix": [4, 6], "w": 6.25, "x": 3.75, "y": 4 }, - { "matrix": [4, 8], "w": 1, "x": 10, "y": 4 }, - { "matrix": [4, 9], "w": 1, "x": 11, "y": 4 }, - { "matrix": [4, 10], "w": 1, "x": 12, "y": 4 }, - { "matrix": [4, 12], "w": 1, "x": 13, "y": 4 }, - { "matrix": [4, 13], "w": 1, "x": 14, "y": 4 }, - { "matrix": [4, 14], "w": 1, "x": 15, "y": 4 } + { "matrix": [4, 8], "x": 10, "y": 4 }, + { "matrix": [4, 9], "x": 11, "y": 4 }, + { "matrix": [4, 10], "x": 12, "y": 4 }, + { "matrix": [4, 12], "x": 13, "y": 4 }, + { "matrix": [4, 13], "x": 14, "y": 4 }, + { "matrix": [4, 14], "x": 15, "y": 4 } ] } } |