3 files changed, 10 insertions, 41 deletions
diff --git a/keyboards/draytronics/daisy/config.h b/keyboards/draytronics/daisy/config.h
index b0db92620a..e701420bee 100644
--- a/keyboards/draytronics/daisy/config.h
+++ b/keyboards/draytronics/daisy/config.h
@@ -18,11 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 3
-#define MATRIX_COLS 4
 
 /*
  * Keyboard Matrix Assignments
@@ -38,43 +33,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { B0, C0, C1}
 #define MATRIX_COL_PINS { C2, C3, C4, C5 }
 
-#define ENCODERS_PAD_A { B1, D0 }
-#define ENCODERS_PAD_B { B2, D1 }
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 #define TAP_CODE_DELAY 10
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
+
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/draytronics/daisy/info.json b/keyboards/draytronics/daisy/info.json
index 80f9da0e59..c847a45650 100644
--- a/keyboards/draytronics/daisy/info.json
+++ b/keyboards/draytronics/daisy/info.json
@@ -8,6 +8,14 @@
         "pid": "0x4441",
         "device_version": "1.0.0"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B1", "pin_b": "B2"},
+            {"pin_a": "D0", "pin_b": "D1"}
+        ]
+    },
+    "processor": "atmega328p",
+    "bootloader": "usbasploader",
     "layout_aliases": {
         "LAYOUT_daisy": "LAYOUT"
     },
diff --git a/keyboards/draytronics/daisy/rules.mk b/keyboards/draytronics/daisy/rules.mk
index 7bf0a86667..09169eaf7f 100644
--- a/keyboards/draytronics/daisy/rules.mk
+++ b/keyboards/draytronics/daisy/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega328p
-
-# Bootloader selection
-BOOTLOADER = usbasploader
-
 # Build Options
 #   change yes to no to disable
 #