3 files changed, 1 insertions, 34 deletions
diff --git a/keyboards/crazy_keyboard_68/config.h b/keyboards/crazy_keyboard_68/config.h
index 948da8caa1..c1c349167d 100644
--- a/keyboards/crazy_keyboard_68/config.h
+++ b/keyboards/crazy_keyboard_68/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -47,10 +46,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LED_CAPS_LOCK_PIN B0
 #define LED_PIN_ON_STATE 0
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN F6
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 84
@@ -77,12 +72,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -94,27 +83,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/crazy_keyboard_68/info.json b/keyboards/crazy_keyboard_68/info.json
index 040b29825d..8f34710df4 100644
--- a/keyboards/crazy_keyboard_68/info.json
+++ b/keyboards/crazy_keyboard_68/info.json
@@ -8,6 +8,7 @@
         "pid": "0x13DE",
         "device_version": "0.0.1"
     },
+    "community_layouts": ["65_ansi"],
     "layouts": {
         "LAYOUT_65_ansi": {
             "layout": [
diff --git a/keyboards/crazy_keyboard_68/rules.mk b/keyboards/crazy_keyboard_68/rules.mk
index 44f97d07c5..85eec9079f 100644
--- a/keyboards/crazy_keyboard_68/rules.mk
+++ b/keyboards/crazy_keyboard_68/rules.mk
@@ -16,5 +16,3 @@ NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = 65_ansi