diff options
Diffstat (limited to 'keyboards/coseyfannitutti')
20 files changed, 52 insertions, 360 deletions
diff --git a/keyboards/coseyfannitutti/discipad/config.h b/keyboards/coseyfannitutti/discipad/config.h index cf378225d4..3c8b981385 100644 --- a/keyboards/coseyfannitutti/discipad/config.h +++ b/keyboards/coseyfannitutti/discipad/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -43,15 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define USB_MAX_POWER_CONSUMPTION 100 -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -62,45 +52,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -116,7 +72,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/coseyfannitutti/discipad/info.json b/keyboards/coseyfannitutti/discipad/info.json index d11120c0dd..ac3d9a07c5 100644 --- a/keyboards/coseyfannitutti/discipad/info.json +++ b/keyboards/coseyfannitutti/discipad/info.json @@ -8,6 +8,8 @@ "pid": "0x1769", "device_version": "0.0.1" }, + "processor": "atmega328p", + "bootloader": "usbasploader", "layouts": { "LAYOUT_numpad_5x4": { "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}, {"label":"Enter", "x":3, "y":3, "h":2}] diff --git a/keyboards/coseyfannitutti/discipad/rules.mk b/keyboards/coseyfannitutti/discipad/rules.mk index 4ff6a67eaf..6e0404820c 100644 --- a/keyboards/coseyfannitutti/discipad/rules.mk +++ b/keyboards/coseyfannitutti/discipad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega328p - -# Bootloader selection -BOOTLOADER = usbasploader - # Build Options # change yes to no to disable # diff --git a/keyboards/coseyfannitutti/discipline/config.h b/keyboards/coseyfannitutti/discipline/config.h index 78b096e566..2d3aa84e8f 100644 --- a/keyboards/coseyfannitutti/discipline/config.h +++ b/keyboards/coseyfannitutti/discipline/config.h @@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -41,15 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define USB_MAX_POWER_CONSUMPTION 100 -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -60,45 +50,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -114,7 +70,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/coseyfannitutti/discipline/info.json b/keyboards/coseyfannitutti/discipline/info.json index f42c420633..aa1afd9fcc 100644 --- a/keyboards/coseyfannitutti/discipline/info.json +++ b/keyboards/coseyfannitutti/discipline/info.json @@ -8,6 +8,8 @@ "pid": "0x6869", "device_version": "0.0.1" }, + "processor": "atmega32a", + "bootloader": "usbasploader", "layout_aliases": { "LAYOUT_65_ansi_2_right_mods": "LAYOUT_65_ansi_blocker", "LAYOUT_65_iso_2_right_mods": "LAYOUT_65_iso_blocker", @@ -16,6 +18,7 @@ "LAYOUT_wkl_iso_2_right_mods": "LAYOUT_65_iso_wkl", "LAYOUT_wkl_iso_3_right_mods": "LAYOUT_65_iso_lwkl" }, + "community_layouts": ["65_ansi", "65_ansi_blocker", "65_iso", "65_iso_blocker"], "layouts": { "LAYOUT_65_ansi": { "layout": [ diff --git a/keyboards/coseyfannitutti/discipline/keymaps/brandonschlack/keymap.c b/keyboards/coseyfannitutti/discipline/keymaps/brandonschlack/keymap.c index e77a24dbc5..e5b110790d 100644 --- a/keyboards/coseyfannitutti/discipline/keymaps/brandonschlack/keymap.c +++ b/keyboards/coseyfannitutti/discipline/keymaps/brandonschlack/keymap.c @@ -30,12 +30,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │Ctrl│ Opt│ Cmd│ Space │ Cmd │FnPly│Lef│Dow│Rig│ * └────┴────┴────┴────────────────────────┴─────┴─────┴───┴───┴───┘ */ -[_BASE] = LAYOUT_65_ansi_2_right_mods( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, \ - HY_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \ - KC_LCTL, KC_LOPT, KC_LCMD, KC_SPC, KC_RCMD, PLY_FN1, KC_LEFT, KC_DOWN, KC_RGHT \ +[_BASE] = LAYOUT_65_ansi_2_right_mods( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + HY_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LOPT, KC_LCMD, KC_SPC, KC_RCMD, PLY_FN1, KC_LEFT, KC_DOWN, KC_RGHT ), /* Function Layer * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ @@ -50,11 +50,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │ │ │Hom│PgD│End│ * └────┴────┴────┴────────────────────────┴─────┴─────┴───┴───┴───┘ */ -[_FN1] = LAYOUT_65_ansi_2_right_mods( \ - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, MC_SLPD, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_F13, KC_F14, KC_F15, MC_LHPD, KC_VOLU, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, \ - _______, _______, _______, _______, _______, QK_BOOT, _______, QM_MAKE, KC_MPRV, KC_MNXT, KC_MPLY, _______, KC_PGUP, KC_MUTE, \ - _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ +[_FN1] = LAYOUT_65_ansi_2_right_mods( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, MC_SLPD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_F13, KC_F14, KC_F15, MC_LHPD, KC_VOLU, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, + _______, _______, _______, _______, _______, QK_BOOT, _______, QM_MAKE, KC_MPRV, KC_MNXT, KC_MPLY, _______, KC_PGUP, KC_MUTE, + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END ) }; diff --git a/keyboards/coseyfannitutti/discipline/rules.mk b/keyboards/coseyfannitutti/discipline/rules.mk index 368e0ef14a..18550f0a64 100644 --- a/keyboards/coseyfannitutti/discipline/rules.mk +++ b/keyboards/coseyfannitutti/discipline/rules.mk @@ -1,12 +1,6 @@ -# MCU name -MCU = atmega32a - # Processor frequency F_CPU = 16000000 -# Bootloader selection -BOOTLOADER = usbasploader - # Build Options # change yes to no to disable # @@ -19,5 +13,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker diff --git a/keyboards/coseyfannitutti/mullet/config.h b/keyboards/coseyfannitutti/mullet/config.h index d35a40b590..20195045e0 100644 --- a/keyboards/coseyfannitutti/mullet/config.h +++ b/keyboards/coseyfannitutti/mullet/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -39,10 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D5 #ifdef RGB_DI_PIN #define RGBLIGHT_EFFECT_BREATHING @@ -62,45 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_SLEEP #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/coseyfannitutti/mullet/info.json b/keyboards/coseyfannitutti/mullet/info.json index 29a2be6a4d..8bdb22f18d 100644 --- a/keyboards/coseyfannitutti/mullet/info.json +++ b/keyboards/coseyfannitutti/mullet/info.json @@ -8,6 +8,8 @@ "pid": "0x6969", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Page Up", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Page Down", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Fn", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}] diff --git a/keyboards/coseyfannitutti/mullet/rules.mk b/keyboards/coseyfannitutti/mullet/rules.mk index 16389b153a..b0ffb80ff3 100644 --- a/keyboards/coseyfannitutti/mullet/rules.mk +++ b/keyboards/coseyfannitutti/mullet/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/coseyfannitutti/mulletpad/config.h b/keyboards/coseyfannitutti/mulletpad/config.h index 06387cc2c2..27e797ea14 100644 --- a/keyboards/coseyfannitutti/mulletpad/config.h +++ b/keyboards/coseyfannitutti/mulletpad/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -39,10 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - //#define RGB_DI_PIN D5 //#ifdef RGB_DI_PIN //#define RGBLED_NUM 8 @@ -52,45 +47,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define RGBLIGHT_SLEEP //#endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/coseyfannitutti/mulletpad/info.json b/keyboards/coseyfannitutti/mulletpad/info.json index 2f467f9a11..be3ef711cc 100644 --- a/keyboards/coseyfannitutti/mulletpad/info.json +++ b/keyboards/coseyfannitutti/mulletpad/info.json @@ -8,6 +8,9 @@ "pid": "0x6666", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["numpad_5x4"], "layouts": { "LAYOUT_numpad_5x4": { "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}, {"label":"Enter", "x":3, "y":3, "h":2}] diff --git a/keyboards/coseyfannitutti/mulletpad/rules.mk b/keyboards/coseyfannitutti/mulletpad/rules.mk index aa8dca5ecb..7829a2753b 100644 --- a/keyboards/coseyfannitutti/mulletpad/rules.mk +++ b/keyboards/coseyfannitutti/mulletpad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = numpad_5x4 diff --git a/keyboards/coseyfannitutti/mysterium/config.h b/keyboards/coseyfannitutti/mysterium/config.h index 9d102ef019..6fde701219 100644 --- a/keyboards/coseyfannitutti/mysterium/config.h +++ b/keyboards/coseyfannitutti/mysterium/config.h @@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -39,15 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -58,45 +48,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -112,7 +68,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/coseyfannitutti/mysterium/info.json b/keyboards/coseyfannitutti/mysterium/info.json index bbe590e7a7..f89161a596 100644 --- a/keyboards/coseyfannitutti/mysterium/info.json +++ b/keyboards/coseyfannitutti/mysterium/info.json @@ -8,6 +8,9 @@ "pid": "0x8769", "device_version": "0.0.1" }, + "processor": "atmega32a", + "bootloader": "usbasploader", + "community_layouts": ["tkl_ansi"], "layouts": { "LAYOUT_tkl_ansi": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Menu", "x":11.25, "y":5.25, "w":1.25}, {"label":"Fn", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}] diff --git a/keyboards/coseyfannitutti/mysterium/rules.mk b/keyboards/coseyfannitutti/mysterium/rules.mk index f54ea2ce50..b6082e107c 100644 --- a/keyboards/coseyfannitutti/mysterium/rules.mk +++ b/keyboards/coseyfannitutti/mysterium/rules.mk @@ -1,12 +1,6 @@ -# MCU name -MCU = atmega32a - # Processor frequency F_CPU = 16000000 -# Bootloader selection -BOOTLOADER = usbasploader - # Build Options # change yes to no to disable # @@ -19,5 +13,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = tkl_ansi diff --git a/keyboards/coseyfannitutti/romeo/config.h b/keyboards/coseyfannitutti/romeo/config.h index 6727bd8d52..ef99a55ac5 100644 --- a/keyboards/coseyfannitutti/romeo/config.h +++ b/keyboards/coseyfannitutti/romeo/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -42,15 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -61,45 +51,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -115,8 +71,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 -*/ diff --git a/keyboards/coseyfannitutti/romeo/info.json b/keyboards/coseyfannitutti/romeo/info.json index 3f8c9a616d..a2dbb61486 100644 --- a/keyboards/coseyfannitutti/romeo/info.json +++ b/keyboards/coseyfannitutti/romeo/info.json @@ -8,6 +8,8 @@ "pid": "0x4069", "device_version": "0.0.1" }, + "processor": "atmega328p", + "bootloader": "usbasploader", "layouts": { "LAYOUT_all": { "layout": [{"label":"1.5u", "x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"label":"1.5u", "x":11.5, "y":0, "w":1.5}, {"label":"1.75u", "x":0, "y":1, "w":1.75}, {"x":1.75, "y":1}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"label":"2.25u", "x":10.75, "y":1, "w":2.25}, {"label":"1.25u", "x":0, "y":2, "w":1.25}, {"x":1.25, "y":2}, {"x":2.25, "y":2}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"label":"1.75u", "x":11.25, "y":2, "w":1.75}, {"label":"1.25u", "x":0, "y":3, "w":1.25}, {"label":"1u", "x":1.25, "y":3}, {"label":"1.25u", "x":2.25, "y":3, "w":1.25}, {"label":"2.25u", "x":3.5, "y":3, "w":2.25}, {"label":"1u", "x":5.75, "y":3}, {"label":"2.75u", "x":6.75, "y":3, "w":2.75}, {"label":"1.25u", "x":9.5, "y":3, "w":1.25}, {"label":"1u", "x":10.75, "y":3}, {"label":"1.25u", "x":11.75, "y":3, "w":1.25}] diff --git a/keyboards/coseyfannitutti/romeo/keymaps/brandonschlack/keymap.c b/keyboards/coseyfannitutti/romeo/keymaps/brandonschlack/keymap.c index d730efecfa..dd95901367 100644 --- a/keyboards/coseyfannitutti/romeo/keymaps/brandonschlack/keymap.c +++ b/keyboards/coseyfannitutti/romeo/keymaps/brandonschlack/keymap.c @@ -28,11 +28,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │Ctrl│Opt│Cmd│ Space │ Cmd│Opt│ Lwr│ * └────┴───┴───┴────────────────────────┴────┴───┴────┘ */ -[_BASE] = LAYOUT_ansi_40( \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - HY_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, SF_SLSH, \ - KC_LCTL, KC_LOPT, KC_LCMD, SPC_RAI, KC_RCMD, KC_ROPT, LOWER \ +[_BASE] = LAYOUT_ansi_40( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + HY_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, SF_SLSH, + KC_LCTL, KC_LOPT, KC_LCMD, SPC_RAI, KC_RCMD, KC_ROPT, LOWER ), /* Lower * ┌─────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐ @@ -45,11 +45,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │ │ │ │ * └────┴───┴───┴────────────────────────┴────┴───┴────┘ */ -[_LOWER] = LAYOUT_ansi_40( \ - KC_DEL, KC_BRMD, KC_BRMU, MC_MSSN, MC_LHPD, _______, _______, _______, KC_PGUP, KC_HOME, KC_END, MC_SLPD, \ - HY_CAPS, KC_MUTE, KC_VOLU, NXT_WIN, PRV_TAB, MC_BACK, MC_FWRD, NXT_TAB, KC_PGDN, KC_UP, KC_MPLY, \ - _______, KC_MPRV, KC_VOLD, KC_MNXT, PX_AFLL, OP_AFLL, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_LOWER] = LAYOUT_ansi_40( + KC_DEL, KC_BRMD, KC_BRMU, MC_MSSN, MC_LHPD, _______, _______, _______, KC_PGUP, KC_HOME, KC_END, MC_SLPD, + HY_CAPS, KC_MUTE, KC_VOLU, NXT_WIN, PRV_TAB, MC_BACK, MC_FWRD, NXT_TAB, KC_PGDN, KC_UP, KC_MPLY, + _______, KC_MPRV, KC_VOLD, KC_MNXT, PX_AFLL, OP_AFLL, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, + _______, _______, _______, _______, _______, _______, _______ ), /* Raise * ┌─────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐ @@ -62,11 +62,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │ │ │ │ * └────┴───┴───┴────────────────────────┴────┴───┴────┘ */ -[_RAISE] = LAYOUT_ansi_40( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_SCLN, KC_QUOT, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_LBRC, KC_RBRC, SF_BSLS, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_RAISE] = LAYOUT_ansi_40( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_SCLN, KC_QUOT, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_LBRC, KC_RBRC, SF_BSLS, + _______, _______, _______, _______, _______, _______, _______ ), /* Adjust/Macro Layer * ┌─────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐ @@ -79,11 +79,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │ │ │ │ * └────┴───┴───┴────────────────────────┴────┴───┴────┘ */ -[_ADJUST] = LAYOUT_ansi_40( \ - QM_MAKE, _______, _______, EE_CLR, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_ADJUST] = LAYOUT_ansi_40( + QM_MAKE, _______, _______, EE_CLR, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ ) /* Blank Layer * ┌─────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐ @@ -97,11 +97,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * └────┴───┴───┴────────────────────────┴────┴───┴────┘ */ /* -[BLANK] = LAYOUT_ansi_40( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[BLANK] = LAYOUT_ansi_40( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ ) */ }; diff --git a/keyboards/coseyfannitutti/romeo/rules.mk b/keyboards/coseyfannitutti/romeo/rules.mk index d1dde8af62..ab2c49da70 100644 --- a/keyboards/coseyfannitutti/romeo/rules.mk +++ b/keyboards/coseyfannitutti/romeo/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega328p - -# Bootloader selection -BOOTLOADER = usbasploader - # Build Options # change yes to no to disable # |