summaryrefslogtreecommitdiff
path: root/keyboards/converter/palm_usb
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/converter/palm_usb')
-rw-r--r--keyboards/converter/palm_usb/matrix.c41
1 files changed, 20 insertions, 21 deletions
diff --git a/keyboards/converter/palm_usb/matrix.c b/keyboards/converter/palm_usb/matrix.c
index 49212f2ef1..590b5eea32 100644
--- a/keyboards/converter/palm_usb/matrix.c
+++ b/keyboards/converter/palm_usb/matrix.c
@@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include QMK_KEYBOARD_H
#include "protocol/serial.h"
#include "timer.h"
-#include "pincontrol.h"
/*
@@ -96,27 +95,27 @@ void pins_init(void) {
// set pins for pullups, Rts , power &etc.
//print ("pins setup\n");
- pinMode(VCC_PIN, PinDirectionOutput);
- digitalWrite(VCC_PIN, PinLevelLow);
+ setPinOutput(VCC_PIN);
+ writePinLow(VCC_PIN);
#if ( HANDSPRING == 0)
#ifdef CY835
- pinMode(GND_PIN, PinDirectionOutput);
- digitalWrite(GND_PIN, PinLevelLow);
+ setPinOutput(GND_PIN);
+ writePinLow(GND_PIN);
- pinMode(PULLDOWN_PIN, PinDirectionOutput);
- digitalWrite(PULLDOWN_PIN, PinLevelLow);
+ setPinOutput(PULLDOWN_PIN);
+ writePinLow(PULLDOWN_PIN);
#endif
- pinMode(DCD_PIN, PinDirectionInput);
- pinMode(RTS_PIN, PinDirectionInput);
+ setPinInput(DCD_PIN);
+ setPinInput(RTS_PIN);
#endif
/* check that the other side isn't powered up.
- test=digitalRead(DCD_PIN);
+ test=readPin(DCD_PIN);
xprintf("b%02X:", test);
- test=digitalRead(RTS_PIN);
+ test=readPin(RTS_PIN);
xprintf("%02X\n", test);
*/
@@ -129,20 +128,20 @@ uint8_t rts_reset(void) {
// On boot, we keep rts as input, then switch roles here
// on leaving sleep, we toggle the same way
- firstread=digitalRead(RTS_PIN);
+ firstread=readPin(RTS_PIN);
// printf("r%02X:", firstread);
- pinMode(RTS_PIN, PinDirectionOutput);
+ setPinOutput(RTS_PIN);
- if (firstread == PinLevelHigh) {
- digitalWrite(RTS_PIN, PinLevelLow);
+ if (firstread) {
+ writePinLow(RTS_PIN);
}
_delay_ms(10);
- digitalWrite(RTS_PIN, PinLevelHigh);
+ writePinHigh(RTS_PIN);
/* the future is Arm
- if (palReadPad(RTS_PIN_IOPRT) == PinLevelLow)
+ if (!palReadPad(RTS_PIN_IOPRT))
{
_delay_ms(10);
palSetPadMode(RTS_PINn_IOPORT, PinDirectionOutput_PUSHPULL);
@@ -224,9 +223,9 @@ uint8_t handspring_handshake(void) {
}
uint8_t handspring_reset(void) {
- digitalWrite(VCC_PIN, PinLevelLow);
+ writePinLow(VCC_PIN);
_delay_ms(5);
- digitalWrite(VCC_PIN, PinLevelHigh);
+ writePinHigh(VCC_PIN);
if ( handspring_handshake() ) {
last_activity = timer_read();
@@ -250,7 +249,7 @@ void matrix_init(void)
#endif
print("power up\n");
- digitalWrite(VCC_PIN, PinLevelHigh);
+ writePinHigh(VCC_PIN);
// wait for DCD strobe from keyboard - it will do this
// up to 3 times, then the board needs the RTS toggled to try again
@@ -265,7 +264,7 @@ void matrix_init(void)
}
#else /// Palm / HP device with DCD
- while( digitalRead(DCD_PIN) != PinLevelHigh ) {;}
+ while( !readPin(DCD_PIN) ) {;}
print("dcd\n");
rts_reset(); // at this point the keyboard should think all is well.