9 files changed, 10 insertions, 66 deletions
diff --git a/keyboards/coarse/cordillera/config.h b/keyboards/coarse/cordillera/config.h
index 962c3edbe7..9d680e19bf 100644
--- a/keyboards/coarse/cordillera/config.h
+++ b/keyboards/coarse/cordillera/config.h
@@ -38,12 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BREATHING_PERIOD 6
 
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/coarse/cordillera/info.json b/keyboards/coarse/cordillera/info.json
index c72fa972ef..53187917a1 100644
--- a/keyboards/coarse/cordillera/info.json
+++ b/keyboards/coarse/cordillera/info.json
@@ -8,6 +8,9 @@
         "pid": "0x1401",
         "device_version": "0.0.1"
     },
+    "processor": "STM32F072",
+    "bootloader": "stm32-dfu",
+    "community_layouts": ["alice", "alice_split_bs"],
     "layouts": {
         "LAYOUT_alice": {
             "layout": [
diff --git a/keyboards/coarse/cordillera/rules.mk b/keyboards/coarse/cordillera/rules.mk
index 9bdd0d72fe..6e8451b10c 100644
--- a/keyboards/coarse/cordillera/rules.mk
+++ b/keyboards/coarse/cordillera/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32F072
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -17,7 +11,5 @@ BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
 
-LAYOUTS = alice alice_split_bs
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
diff --git a/keyboards/coarse/ixora/config.h b/keyboards/coarse/ixora/config.h
index 98317817a3..9efba5d221 100644
--- a/keyboards/coarse/ixora/config.h
+++ b/keyboards/coarse/ixora/config.h
@@ -1,6 +1,5 @@
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 1
@@ -12,9 +11,6 @@
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 0
-
 #define LED_NUM_LOCK_PIN A9
 #define LED_CAPS_LOCK_PIN A10
 #define LED_SCROLL_LOCK_PIN A8
diff --git a/keyboards/coarse/ixora/info.json b/keyboards/coarse/ixora/info.json
index 147716608a..a408b6127f 100644
--- a/keyboards/coarse/ixora/info.json
+++ b/keyboards/coarse/ixora/info.json
@@ -8,6 +8,9 @@
         "pid": "0x0C61",
         "device_version": "1.0.0"
     },
+    "processor": "STM32F042",
+    "bootloader": "stm32-dfu",
+    "debounce": 0,
     "layouts": {
         "LAYOUT_full": {
             "layout": [{"label":"1", "x":0, "y":0}, {"label":"2", "x":1, "y":0}, {"label":"3", "x":2, "y":0}, {"label":"Caps Lock", "x":0, "y":1}, {"label":"Num Lock", "x":1, "y":1}, {"label":"Scroll Lock", "x":2, "y":1}]
diff --git a/keyboards/coarse/ixora/rules.mk b/keyboards/coarse/ixora/rules.mk
index 559be109a9..ff4c3156fe 100644
--- a/keyboards/coarse/ixora/rules.mk
+++ b/keyboards/coarse/ixora/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32F042
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/coarse/vinta/config.h b/keyboards/coarse/vinta/config.h
index 0ca163539d..772616cd07 100644
--- a/keyboards/coarse/vinta/config.h
+++ b/keyboards/coarse/vinta/config.h
@@ -1,6 +1,5 @@
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -11,35 +10,3 @@
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 0
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
diff --git a/keyboards/coarse/vinta/info.json b/keyboards/coarse/vinta/info.json
index 7ae03ab599..8a615aac0d 100644
--- a/keyboards/coarse/vinta/info.json
+++ b/keyboards/coarse/vinta/info.json
@@ -8,6 +8,10 @@
     "pid": "0x0C61",
     "device_version": "1.0.0"
   },
+  "processor": "STM32F042",
+  "bootloader": "stm32-dfu",
+  "debounce": 0,
+  "community_layouts": ["65_ansi_blocker"],
   "layouts": {
     "LAYOUT_69_ansi": {
         "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"|", "x":14, "y":0}, {"label":"Del", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Reset", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
diff --git a/keyboards/coarse/vinta/rules.mk b/keyboards/coarse/vinta/rules.mk
index b503edcdee..88f853eb44 100644
--- a/keyboards/coarse/vinta/rules.mk
+++ b/keyboards/coarse/vinta/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32F042
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -16,8 +10,5 @@ COMMAND_ENABLE = no    				# Commands for debug and configuration
 NKRO_ENABLE = yes           # Enable N-Key Rollover
 NO_USB_STARTUP_CHECK = no         	# Disable initialization only when usb is plugged in
 
-LAYOUTS = 65_ansi_blocker
-
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE