1 files changed, 0 insertions, 124 deletions
diff --git a/keyboards/cannonkeys/satisfaction75/i2c_master.c b/keyboards/cannonkeys/satisfaction75/i2c_master.c
deleted file mode 100644
index d87f7668d5..0000000000
--- a/keyboards/cannonkeys/satisfaction75/i2c_master.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* Copyright 2018 Jack Humbert
- * Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/* This library is only valid for STM32 processors.
- * This library follows the convention of the AVR i2c_master library.
- * As a result addresses are expected to be already shifted (addr << 1).
- * I2CD1 is the default driver which corresponds to pins B6 and B7. This
- * can be changed.
- * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
- * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
- * but using any other I2C pins should be trivial.
- */
-
-#include "i2c_master.h"
-#include "quantum.h"
-#include <string.h>
-#include <hal.h>
-
-static uint8_t i2c_address;
-
-// This configures the I2C clock to 400khz assuming a 48Mhz clock
-// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
-static const I2CConfig i2cconfig = {
-  STM32_TIMINGR_PRESC(0x00U) |
-  STM32_TIMINGR_SCLDEL(0x03U) | STM32_TIMINGR_SDADEL(0x01U) |
-  STM32_TIMINGR_SCLH(0x03U)  | STM32_TIMINGR_SCLL(0x09U),
-  0,
-  0
-};
-
-static i2c_status_t chibios_to_qmk(const msg_t status) {
-  switch (status) {
-    case I2C_NO_ERROR:
-      return I2C_STATUS_SUCCESS;
-    case I2C_TIMEOUT:
-      return I2C_STATUS_TIMEOUT;
-    // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
-    default:
-      return I2C_STATUS_ERROR;
-  }
-}
-
-__attribute__ ((weak))
-void i2c_init(void)
-{
-  // Try releasing special pins for a short time
-  palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
-  palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
-
-  chThdSleepMilliseconds(10);
-
-  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN);
-  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN);
-
-  //i2cInit(); //This is invoked by halInit() so no need to redo it.
-}
-
-i2c_status_t i2c_start(uint8_t address)
-{
-  i2c_address = address;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-  return I2C_STATUS_SUCCESS;
-}
-
-i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout)
-{
-  i2c_address = address;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-  i2cAcquireBus(&I2C_DRIVER);
-  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout));
-  i2cReleaseBus(&I2C_DRIVER);
-  return chibios_to_qmk(status);
-}
-
-i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
-{
-  i2c_address = address;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-  msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, TIME_MS2I(timeout));
-  return chibios_to_qmk(status);
-}
-
-i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout)
-{
-  i2c_address = devaddr;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-
-  uint8_t complete_packet[length + 1];
-  for(uint8_t i = 0; i < length; i++)
-  {
-    complete_packet[i+1] = data[i];
-  }
-  complete_packet[0] = regaddr;
-
-  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout));
-  return chibios_to_qmk(status);
-}
-
-i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
-{
-  i2c_address = devaddr;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), &regaddr, 1, data, length, TIME_MS2I(timeout));
-  return chibios_to_qmk(status);
-}
-
-void i2c_stop(void)
-{
-  i2cStop(&I2C_DRIVER);
-}