3 files changed, 9 insertions, 42 deletions
diff --git a/keyboards/bt66tech/bt66tech60/config.h b/keyboards/bt66tech/bt66tech60/config.h
index 40dbf63028..c5007ffbbb 100644
--- a/keyboards/bt66tech/bt66tech60/config.h
+++ b/keyboards/bt66tech/bt66tech60/config.h
@@ -17,26 +17,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
 #define MATRIX_COL_PINS { B9, B8, B7, B6, B5, B4, B3, B11, A15, A10, A9, B14, B13, B12 }
 #define MATRIX_ROW_PINS { B10, B1, B0, A7, A6 }
 #define DIODE_DIRECTION COL2ROW
 
-#define BACKLIGHT_PIN A8
 #define BACKLIGHT_PWM_DRIVER PWMD1
 #define BACKLIGHT_PWM_CHANNEL 1
-#define BACKLIGHT_LEVELS 6
-#define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
@@ -61,27 +47,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-#define FORCE_NKRO
 
+#define FORCE_NKRO
 
 /* disable debug print */
 //#define NO_DEBUG
diff --git a/keyboards/bt66tech/bt66tech60/info.json b/keyboards/bt66tech/bt66tech60/info.json
index 0f65b6f57e..91b824b6a4 100644
--- a/keyboards/bt66tech/bt66tech60/info.json
+++ b/keyboards/bt66tech/bt66tech60/info.json
@@ -8,6 +8,14 @@
         "pid": "0x7070",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "pin": "A8",
+        "levels": 6,
+        "breathing": true
+    },
+    "processor": "STM32F103",
+    "bootloader": "stm32duino",
+    "community_layouts": ["60_ansi"],
     "layouts": {
         "LAYOUT_60_ansi": {
 "layout": [
diff --git a/keyboards/bt66tech/bt66tech60/rules.mk b/keyboards/bt66tech/bt66tech60/rules.mk
index a083b1b83a..5989895b84 100644
--- a/keyboards/bt66tech/bt66tech60/rules.mk
+++ b/keyboards/bt66tech/bt66tech60/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32F103
-
-# Bootloader selection
-BOOTLOADER = stm32duino
-
 # Build Options
 #   change yes to no to disable
 #
@@ -21,7 +15,5 @@ WS2812_DRIVER = spi
 
 DEFAULT_FOLDER = bt66tech/bt66tech60
 
-LAYOUTS = 60_ansi
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE