3 files changed, 4 insertions, 42 deletions
diff --git a/keyboards/bear_face/config.h b/keyboards/bear_face/config.h
index 589ea350c1..c5099e793c 100644
--- a/keyboards/bear_face/config.h
+++ b/keyboards/bear_face/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -32,48 +31,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define BACKLIGHT_PIN F7
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 6
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
 #define FORCE_NKRO
 
 /*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/bear_face/info.json b/keyboards/bear_face/info.json
index e2589d91af..39f16ab6c9 100644
--- a/keyboards/bear_face/info.json
+++ b/keyboards/bear_face/info.json
@@ -3,8 +3,11 @@
     "manufacturer": "chemicalwill",
     "url": "https://github.com/chemicalwill/bear_face_pcb",
     "maintainer": "chemicalwill",
+    "debounce": 6,
     "usb": {
         "vid": "0xFEED",
         "pid": "0x09F5"
-    }
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu"
 }
diff --git a/keyboards/bear_face/rules.mk b/keyboards/bear_face/rules.mk
index f198cf7cc2..3c6f269144 100644
--- a/keyboards/bear_face/rules.mk
+++ b/keyboards/bear_face/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #