summaryrefslogtreecommitdiff
path: root/keyboards/bastardkb
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/bastardkb')
-rw-r--r--keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h119
-rw-r--r--keyboards/bastardkb/charybdis/3x5/keymaps/drashna/halconf.h14
-rw-r--r--keyboards/bastardkb/charybdis/3x5/keymaps/drashna/keymap.c12
-rw-r--r--keyboards/bastardkb/charybdis/3x5/keymaps/drashna/mcuconf.h30
-rw-r--r--keyboards/bastardkb/charybdis/3x5/keymaps/drashna/rules.mk59
-rw-r--r--keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h108
-rw-r--r--keyboards/bastardkb/charybdis/4x6/keymaps/drashna/halconf.h26
-rw-r--r--keyboards/bastardkb/charybdis/4x6/keymaps/drashna/keymap.c26
-rw-r--r--keyboards/bastardkb/charybdis/4x6/keymaps/drashna/mcuconf.h25
-rw-r--r--keyboards/bastardkb/charybdis/4x6/keymaps/drashna/rules.mk90
-rw-r--r--keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/halconf.h23
-rw-r--r--keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/keymap.c18
-rw-r--r--keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/mcuconf.h26
13 files changed, 304 insertions, 272 deletions
diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h
index ad549a5e22..514a153623 100644
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h
+++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h
@@ -18,87 +18,90 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#undef PRODUCT
-#define PRODUCT "Charybdis Nano (Blackpill)"
-
-#undef MATRIX_ROW_PINS
-#define MATRIX_ROW_PINS \
- { B12, B13, B14, B15 }
-#undef MATRIX_COL_PINS
-#define MATRIX_COL_PINS \
- { A15, B3, B4, B5, B6 }
-
-
-#undef MATRIX_ROW_PINS_RIGHT
-#define MATRIX_ROW_PINS_RIGHT \
- { B12, B13, B14, B15 }
-#undef MATRIX_COL_PINS_RIGHT
-#define MATRIX_COL_PINS_RIGHT \
- { A15, B3, B4, B5, B6 }
-
-#define USB_VBUS_PIN B10
-#define SPLIT_HAND_PIN C14 // high = left, low = right
+#ifdef KEYBOARD_bastardkb_charybdis_3x5_blackpill
+
+# undef MATRIX_ROW_PINS
+# define MATRIX_ROW_PINS \
+ { B12, B13, B14, B15 }
+# undef MATRIX_COL_PINS
+# define MATRIX_COL_PINS \
+ { A15, B3, B4, B5, B6 }
+
+# undef MATRIX_ROW_PINS_RIGHT
+# define MATRIX_ROW_PINS_RIGHT \
+ { B12, B13, B14, B15 }
+# undef MATRIX_COL_PINS_RIGHT
+# define MATRIX_COL_PINS_RIGHT \
+ { A15, B3, B4, B5, B6 }
+
+# define USB_VBUS_PIN B10
+# undef SPLIT_HAND_PIN
+# define SPLIT_HAND_PIN C14 // high = left, low = right
// WS2812 RGB LED strip input and number of LEDs
-#undef RGB_DI_PIN
-#define RGB_DI_PIN A1
-#undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
-#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
-#define WS2812_PWM_CHANNEL 2 // default: 2
-#define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
-#define WS2812_EXTERNAL_PULLUP
+# undef RGB_DI_PIN
+# define RGB_DI_PIN A1
+# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
+# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
+# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
+# define WS2812_PWM_CHANNEL 2 // default: 2
+# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+# define WS2812_EXTERNAL_PULLUP
//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
-#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#define WS2812_PWM_TARGET_PERIOD 800000
+# undef WS2812_DMA_STREAM
+# define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+# define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+# define WS2812_PWM_TARGET_PERIOD 800000
-#define DEBUG_LED_PIN C13
+# define DEBUG_LED_PIN C13
/* Audio config */
-#define AUDIO_PIN B1
-#define AUDIO_PWM_DRIVER PWMD3
-#define AUDIO_PWM_CHANNEL 4
-#define AUDIO_PWM_PAL_MODE 2
+# define AUDIO_PIN B1
+# define AUDIO_PWM_DRIVER PWMD3
+# define AUDIO_PWM_CHANNEL 4
+# define AUDIO_PWM_PAL_MODE 2
/* serial.c configuration for split keyboard */
-#undef SOFT_SERIAL_PIN
-#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
-#define SERIAL_USART_TX_PIN A2
-#define SERIAL_USART_RX_PIN A3
-#define SERIAL_USART_DRIVER SD2
-#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
-#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
-#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100
-#define SERIAL_USART_SPEED 921600
+# undef SOFT_SERIAL_PIN
+# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
+# undef SERIAL_USART_TX_PIN
+# define SERIAL_USART_TX_PIN A2
+# undef SERIAL_USART_RX_PIN
+# define SERIAL_USART_RX_PIN A3
+# define SERIAL_USART_DRIVER SD2
+# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+# define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+# define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100
+# define SERIAL_USART_SPEED 921600
// #define SERIAL_USART_PIN_SWAP // swap RX and TX pins on master
// To use the highest possible baudrate (3.75Mbit/s) uncomment the following
// line, this can result in dropped communications so lower the speed if there
// are many timeouts.
// #define SERIAL_USART_SPEED (STM32_PCLK2 >> 4)
-#define CRC8_USE_TABLE
-#define CRC8_OPTIMIZE_SPEED
+# define CRC8_USE_TABLE
+# define CRC8_OPTIMIZE_SPEED
/* spi config for eeprom and pmw3360 sensor */
-#define SPI_DRIVER SPID1
-#define SPI_SCK_PIN A5
-#define SPI_SCK_PAL_MODE 5
-#define SPI_MOSI_PIN A7
-#define SPI_MOSI_PAL_MODE 5
-#define SPI_MISO_PIN A6
-#define SPI_MISO_PAL_MODE 5
+# define SPI_DRIVER SPID1
+# define SPI_SCK_PIN A5
+# define SPI_SCK_PAL_MODE 5
+# define SPI_MOSI_PIN A7
+# define SPI_MOSI_PAL_MODE 5
+# define SPI_MISO_PIN A6
+# define SPI_MISO_PAL_MODE 5
/* eeprom config */
-#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
-#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64
+# define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
+# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64
// #define EXTERNAL_EEPROM_BYTE_COUNT 8196
// #define EXTERNAL_EEPROM_PAGE_SIZE 32
// #define EXTERNAL_EEPROM_ADDRESS_SIZE 2
/* pmw3360 config */
-#undef PMW33XX_CS_PIN
-#define PMW33XX_CS_PIN B0
+# undef PMW33XX_CS_PIN
+# define PMW33XX_CS_PIN B0
+#endif
#define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200
#define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400
diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/halconf.h b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/halconf.h
index bc07c10527..3b254172b4 100644
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/halconf.h
+++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/halconf.h
@@ -15,11 +15,13 @@
*/
#pragma once
-#define HAL_USE_PWM TRUE
-#define HAL_USE_SERIAL TRUE
-#define HAL_USE_I2C TRUE
-#define HAL_USE_SPI TRUE
-#define SPI_USE_WAIT TRUE
-#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#if defined(KEYBOARD_bastardkb_charybdis_3x5_blackpill)
+# define HAL_USE_PWM TRUE
+# define HAL_USE_SERIAL TRUE
+# define HAL_USE_I2C TRUE
+# define HAL_USE_SPI TRUE
+# define SPI_USE_WAIT TRUE
+# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#endif
#include_next <halconf.h>
diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/keymap.c b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/keymap.c
index a923a80b40..02cb89fe65 100644
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/keymap.c
+++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/keymap.c
@@ -83,24 +83,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
};
-void matrix_init_keyemap(void) { setPinInputHigh(A0); }
+#if defined(KEYBOARD_bastardkb_charybdis_3x5_blackpill)
+void keyboard_pre_init_keymap(void) {
+ setPinInputHigh(A0);
+}
-void matrix_scan_keymap(void) {
+void housekeeping_task_keymap(void) {
if (!readPin(A0)) {
reset_keyboard();
}
}
-#ifdef USB_VBUS_PIN
+# ifdef USB_VBUS_PIN
bool usb_vbus_state(void) {
setPinInputLow(USB_VBUS_PIN);
wait_us(5);
return readPin(USB_VBUS_PIN);
}
-#endif
+# endif
void matrix_output_unselect_delay(uint8_t line, bool key_pressed) {
for (int32_t i = 0; i < 40; i++) {
__asm__ volatile("nop" ::: "memory");
}
}
+#endif
diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/mcuconf.h b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/mcuconf.h
index fd71b54b77..9c40967015 100644
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/mcuconf.h
+++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/mcuconf.h
@@ -18,25 +18,27 @@
#include_next "mcuconf.h"
-#undef STM32_I2C_USE_I2C1
-#define STM32_I2C_USE_I2C1 TRUE
+#if defined(KEYBOARD_bastardkb_charybdis_3x5_blackpill)
+# undef STM32_I2C_USE_I2C1
+# define STM32_I2C_USE_I2C1 TRUE
// #undef STM32_I2C_I2C1_RX_DMA_STREAM
// #define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#undef STM32_I2C_I2C1_TX_DMA_STREAM
-#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+# undef STM32_I2C_I2C1_TX_DMA_STREAM
+# define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-#undef STM32_PWM_USE_TIM2
-#define STM32_PWM_USE_TIM2 TRUE
+# undef STM32_PWM_USE_TIM2
+# define STM32_PWM_USE_TIM2 TRUE
-#undef STM32_PWM_USE_TIM3
-#define STM32_PWM_USE_TIM3 TRUE
+# undef STM32_PWM_USE_TIM3
+# define STM32_PWM_USE_TIM3 TRUE
-#undef STM32_SPI_USE_SPI1
-#define STM32_SPI_USE_SPI1 TRUE
+# undef STM32_SPI_USE_SPI1
+# define STM32_SPI_USE_SPI1 TRUE
-#undef STM32_SERIAL_USE_USART2
-#define STM32_SERIAL_USE_USART2 TRUE
+# undef STM32_SERIAL_USE_USART2
+# define STM32_SERIAL_USE_USART2 TRUE
-#undef STM32_ST_USE_TIMER
-#define STM32_ST_USE_TIMER 5
+# undef STM32_ST_USE_TIMER
+# define STM32_ST_USE_TIMER 5
+#endif
diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/rules.mk b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/rules.mk
index dc0395c800..ff4ede45ca 100644
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/rules.mk
+++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/rules.mk
@@ -1,28 +1,45 @@
-# MCU name
-MCU = STM32F411
-BOARD = BLACKPILL_STM32_F411
+RGB_MATRIX_ENABLE = no
+CUSTOM_UNICODE_ENABLE = no
+CUSTOM_POINTING_DEVICE = no
+CUSTOM_SPLIT_TRANSPORT_SYNC = no
-# Bootloader selection
-# BOOTLOADER = stm32-dfu
-BOOTLOADER := tinyuf2
-LTO_ENABLE := no
+ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/3x5/blackpill)
+ # Bootloader selection
+ BOOTLOADER := tinyuf2
-BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
-KEYBOARD_SHARED_EP = yes
-MOUSE_SHARED_EP = yes
+ LTO_ENABLE := no
-EEPROM_DRIVER = spi
-WS2812_DRIVER = pwm
-SERIAL_DRIVER = usart
-AUDIO_DRIVER = pwm_hardware
+ AUDIO_SUPPORTED = yes
+ AUDIO_ENABLE = yes
+ AUDIO_DRIVER = pwm_hardware
-AUDIO_SUPPORTED = yes
-AUDIO_ENABLE = yes
-MOUSEKEY_ENABLE = yes
-NKRO_ENABLE = yes
-CONSOLE_ENABLE = yes
+ OVERLOAD_FEATURES = yes
+endif
-AUTOCORRECT_ENABLE = yes
+ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/3x5/v2/stemcell)
+ OVERLOAD_FEATURES = yes
+endif
+ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/3x5/v2/splinky)
+ OVERLOAD_FEATURES = yes
+endif
-DEBOUNCE_TYPE = asym_eager_defer_pk
+
+ifeq ($(strip $(OVERLOAD_FEATURES)), yes)
+ BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+ KEYBOARD_SHARED_EP = yes
+ MOUSE_SHARED_EP = yes
+
+ MOUSEKEY_ENABLE = yes
+ NKRO_ENABLE = yes
+ CONSOLE_ENABLE = yes
+ RGB_MATRIX_ENABLE = yes
+
+ AUTOCORRECT_ENABLE = yes
+
+ CUSTOM_UNICODE_ENABLE = yes
+ CUSTOM_POINTING_DEVICE = yes
+ CUSTOM_SPLIT_TRANSPORT_SYNC = yes
+
+ DEBOUNCE_TYPE = asym_eager_defer_pk
+endif
diff --git a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h
index e29ff644da..cb11ea2748 100644
--- a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h
+++ b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h
@@ -16,99 +16,49 @@
*/
#pragma once
-#undef PRODUCT
-#define PRODUCT "Charybdis (4x6) Blackpill"
+#if defined(KEYBOARD_bastardkb_charybdis_4x6_blackpill)
+# undef MATRIX_COL_PINS
+# define MATRIX_COL_PINS \
+ { B0, B1, B12, B3, B4, B5 }
-#undef MATRIX_COL_PINS
-#define MATRIX_COL_PINS \
- { B0, B1, B12, B3, B4, B5 }
-#undef MATRIX_COL_PINS_RIGHT
-#define MATRIX_COL_PINS_RIGHT \
- { B0, B1, B12, B3, B4, B5 }
+# define USB_VBUS_PIN B10
+# define DEBUG_LED_PIN C13
-#undef MATRIX_ROW_PINS
-#define MATRIX_ROW_PINS \
- { B15, A2, B8, A8, B9 }
-#undef MATRIX_ROW_PINS_RIGHT
-#define MATRIX_ROW_PINS_RIGHT \
- { B15, A2, B8, A8, B9 }
+# define AUDIO_PIN B7
+# define AUDIO_PWM_DRIVER PWMD4
+# define AUDIO_PWM_CHANNEL 2
+# define AUDIO_PWM_PAL_MODE 2
+# define AUDIO_INIT_DELAY
+# define AUDIO_ENABLE_TONE_MULTIPLEXING
+# define AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT 10
+# define SERIAL_USART_SPEED (1 * 1024 * 1024)
-#define DIODE_DIRECTION ROW2COL
-#define SPLIT_HAND_PIN A3
-#undef MASTER_RIGHT
-#define USB_VBUS_PIN B10
+# undef POINTING_DEVICE_CS_PIN
+# define POINTING_DEVICE_CS_PIN A15 // b14
+# define PMW33XX_LIFTOFF_DISTANCE 0b1111
+#endif
-#undef RGB_DI_PIN
-#define RGB_DI_PIN A1
-#define WS2812_EXTERNAL_PULLUP
-#define WS2812_PWM_DRIVER PWMD2
-#define WS2812_PWM_CHANNEL 2
-#define WS2812_PWM_PAL_MODE 1
-#define WS2812_EXTERNAL_PULLUP
-#define WS2812_DMA_STREAM STM32_DMA1_STREAM1
-#define WS2812_DMA_CHANNEL 3
-#define WS2812_PWM_TARGET_PERIOD 800000
-
-#define DEBUG_LED_PIN C13
-
-#define AUDIO_PIN B7
-#define AUDIO_PWM_DRIVER PWMD4
-#define AUDIO_PWM_CHANNEL 2
-#define AUDIO_PWM_PAL_MODE 2
-#define AUDIO_INIT_DELAY
-#define AUDIO_ENABLE_TONE_MULTIPLEXING
-#define AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT 10
-
-#undef SOFT_SERIAL_PIN
-// #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
-#define SERIAL_USART_TX_PIN A9
-// #define SERIAL_USART_RX_PIN A3
-// #define SERIAL_USART_DRIVER SD2
-// #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
-// #define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
-// #define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100
-// #define SERIAL_USART_SPEED 921600
-#define SERIAL_USART_SPEED (1.5 * 1024 * 1024)
-
-#define CRC8_USE_TABLE
-#define CRC8_OPTIMIZE_SPEED
-
-/* spi config for eeprom and pmw3360 sensor */
-#define SPI_DRIVER SPID1
-#define SPI_SCK_PIN A5
-#define SPI_SCK_PAL_MODE 5
-#define SPI_MOSI_PIN A7
-#define SPI_MOSI_PAL_MODE 5
-#define SPI_MISO_PIN A6
-#define SPI_MISO_PAL_MODE 5
-
-#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
-#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64
-
-#undef PMW33XX_CS_PIN
-#define PMW33XX_CS_PIN A15 // b14
-#define PMW33XX_LIFTOFF_DISTANCE 0b1111
#undef ROTATIONAL_TRANSFORM_ANGLE
-#define ROTATIONAL_TRANSFORM_ANGLE -65
-
-#define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200
-#define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400
-#define CHARYBDIS_MINIMUM_SNIPING_DPI 200
-#define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 100
+#define ROTATIONAL_TRANSFORM_ANGLE 25
+#define POINTING_DEVICE_ROTATION_270
/* RGB Matrix. */
-
#undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
+#define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200
+#define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400
+#define CHARYBDIS_MINIMUM_SNIPING_DPI 200
+#define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 100
+
#define CHARYBDIS_CONFIG_SYNC
-#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0
-#define BOOTMAGIC_LITE_ROW_RIGHT 5
+#define BOOTMAGIC_LITE_ROW_RIGHT 5
#define BOOTMAGIC_LITE_COLUMN_RIGHT 0
-#define BOOTMAGIC_LITE_EEPROM_ROW 1
+#define BOOTMAGIC_LITE_EEPROM_ROW 1
#define BOOTMAGIC_LITE_EEPROM_COLUMN 0
-#define BOOTMAGIC_LITE_EEPROM_ROW_RIGHT 1
+#define BOOTMAGIC_LITE_EEPROM_ROW_RIGHT 1
#define BOOTMAGIC_LITE_EEPROM_COLUMN_RIGHT 0
diff --git a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/halconf.h b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/halconf.h
deleted file mode 100644
index 8aad829e5c..0000000000
--- a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/halconf.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Copyright 2020 Nick Brassel (tzarc)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#define HAL_USE_PWM TRUE
-#define HAL_USE_PAL TRUE
-#define HAL_USE_SERIAL TRUE
-// #define HAL_USE_I2C TRUE
-#define HAL_USE_SPI TRUE
-#define SPI_USE_WAIT TRUE
-#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
-
-#include_next <halconf.h>
diff --git a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/keymap.c b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/keymap.c
index cc6dbc34e9..50a05e1b35 100644
--- a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/keymap.c
+++ b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/keymap.c
@@ -83,12 +83,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
SFT_T(KC_SPACE), ALT_T(KC_Q), _______
),
[_MOUSE] = LAYOUT_charybdis_4x6(
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, KC_WH_U, DPI_RMOD,DPI_MOD, S_D_RMOD,S_D_MOD, _______,
+ _______, _______, _______, _______, _______, _______, _______, DPI_RMOD,DPI_MOD, S_D_RMOD,S_D_MOD, _______,
+ _______, _______, _______, _______, _______, _______, KC_WH_U, _______, _______, _______, _______, DRGSCRL,
_______, _______, _______, _______, _______, _______, KC_WH_D, KC_BTN1, KC_BTN3, KC_BTN2, KC_BTN6, SNIPING,
- _______, _______, _______, _______, _______, _______, KC_BTN7, KC_BTN4, KC_BTN5, KC_BTN8, DRGSCRL, _______,
- _______, SNIPING, SNIPING, _______, _______,
- _______, _______, _______
+ _______, _______, _______, _______, _______, _______, KC_BTN7, KC_BTN4, KC_BTN5, KC_BTN8, _______, _______,
+ _______, _______, _______, _______, _______,
+ _______, _______, _______
),
[_LOWER] = LAYOUT_charybdis_4x6_wrapper(
@@ -110,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[_ADJUST] = LAYOUT_charybdis_4x6_wrapper(
- QK_MAKE, KC_WIDE,KC_AUSSIE,KC_SCRIPT,KC_ZALGO,KC_SUPER, KC_NOMODE,KC_BLOCKS,KC_REGIONAL,TG_GAME,TG_DBLO, QK_BOOT,
+ QK_MAKE, KC_WIDE,KC_AUSSIE,KC_SCRIPT,KC_ZALGO,KC_SUPER, KC_NOMODE,KC_COMIC,KC_REGIONAL,TG_GAME,TG_DBLO, QK_BOOT,
VRSN, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, EE_CLR,
KEYLOCK, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS,
UC_NEXT, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY,
@@ -121,8 +121,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// clang-format on
-void matrix_init_keymap(void) {
- setPinInputHigh(A0);
+void keyboard_post_init_keymap(void) {
#ifdef RGB_MATRIX_ENABLE
g_led_config.flags[53] = g_led_config.flags[54] = g_led_config.flags[55] =
g_led_config.flags[0] = g_led_config.flags[1] = g_led_config.flags[2] = g_led_config.flags[3] =
@@ -131,11 +130,17 @@ void matrix_init_keymap(void) {
#endif
}
-void matrix_scan_keymap(void) {
+#if defined(KEYBOARD_bastardkb_charybdis_4x6_blackpill)
+void keyboard_pre_init_keymap(void) {
+ setPinInputHigh(A0);
+}
+
+void housekeeping_task_keymap(void) {
if (!readPin(A0)) {
reset_keyboard();
}
}
+#endif
#ifdef USB_VBUS_PIN
bool usb_vbus_state(void) {
@@ -145,12 +150,13 @@ bool usb_vbus_state(void) {
}
#endif
+#if defined(KEYBOARD_bastardkb_charybdis_4x6_blackpill)
void matrix_output_unselect_delay(uint8_t line, bool key_pressed) {
for (int32_t i = 0; i < 40; i++) {
__asm__ volatile("nop" ::: "memory");
}
}
-
+#endif
#ifdef SWAP_HANDS_ENABLE
const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
diff --git a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/mcuconf.h b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/mcuconf.h
index 4f04811e54..3a23d5f370 100644
--- a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/mcuconf.h
+++ b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/mcuconf.h
@@ -18,23 +18,10 @@
#include_next "mcuconf.h"
-#undef STM32_PWM_USE_ADVANCED
-#define STM32_PWM_USE_ADVANCED TRUE
+#if defined(KEYBOARD_bastardkb_charybdis_4x6_blackpill)
+# undef STM32_PWM_USE_ADVANCED
+# define STM32_PWM_USE_ADVANCED TRUE
-#undef STM32_PWM_USE_TIM1
-#define STM32_PWM_USE_TIM1 TRUE
-
-#undef STM32_PWM_USE_TIM2
-#define STM32_PWM_USE_TIM2 TRUE
-
-#undef STM32_PWM_USE_TIM4
-#define STM32_PWM_USE_TIM4 TRUE
-
-#undef STM32_SPI_USE_SPI1
-#define STM32_SPI_USE_SPI1 TRUE
-
-#undef STM32_SERIAL_USE_USART1
-#define STM32_SERIAL_USE_USART1 TRUE
-
-#undef STM32_ST_USE_TIMER
-#define STM32_ST_USE_TIMER 5
+# undef STM32_PWM_USE_TIM4
+# define STM32_PWM_USE_TIM4 TRUE
+#endif
diff --git a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/rules.mk b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/rules.mk
index d655fbd5dc..12e9cecda0 100644
--- a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/rules.mk
+++ b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/rules.mk
@@ -1,34 +1,56 @@
-# MCU name
-MCU = STM32F411
-BOARD = BLACKPILL_STM32_F411
-
-# Bootloader selection
-BOOTLOADER := tinyuf2
-
-BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Enable N-Key Rollover
-RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
-AUDIO_ENABLE = yes # Audio output
-AUDIO_SUPPORTED = yes # is set to no in kb, needs to be forcibly enabled
-
-KEYBOARD_SHARED_EP = yes
-MOUSE_SHARED_EP = yes
-
-EEPROM_DRIVER = spi
-WS2812_DRIVER = pwm
-SERIAL_DRIVER = usart
-AUDIO_DRIVER = pwm_hardware
-BACKLIGHT_DRIVER = pwm
-
-AUTOCORRECT_ENABLE = yes
-CAPS_WORD_ENABLE = yes
-SWAP_HANDS_ENABLE = yes
-TAP_DANCE_ENABLE = yes
-DEBOUNCE_TYPE = asym_eager_defer_pk
-WPM_ENABLE = yes
-LTO_ENABLE = no
-# OPT = 3
+CUSTOM_UNICODE_ENABLE = no
+CUSTOM_POINTING_DEVICE = no
+CUSTOM_SPLIT_TRANSPORT_SYNC = no
+
+ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/4x6/blackpill)
+ # MCU name
+ # Bootloader selection
+ BOOTLOADER := tinyuf2
+
+ AUDIO_ENABLE = yes # Audio output
+ AUDIO_SUPPORTED = yes # is set to no in kb, needs to be forcibly enabled
+ AUDIO_DRIVER = pwm_hardware
+
+ BACKLIGHT_DRIVER = pwm
+
+ OVERLOAD_FEATURES = yes
+endif
+
+ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/4x6/v2/stemcell)
+ OVERLOAD_FEATURES = yes
+endif
+ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/4x6/v2/splinky)
+ OVERLOAD_FEATURES = yes
+endif
+ifeq ($(strip $(MCU)), atmega32u4)
+ LTO_ENABLE = yes
+ BOOTLOADER = qmk-hid
+ BOOTLOADER_SIZE = 512
+endif
+
+ifeq ($(strip $(OVERLOAD_FEATURES)), yes)
+ BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+ MOUSEKEY_ENABLE = yes # Mouse keys
+ EXTRAKEY_ENABLE = yes # Audio control and System control
+ CONSOLE_ENABLE = yes # Console for debug
+ COMMAND_ENABLE = no # Commands for debug and configuration
+ NKRO_ENABLE = yes # Enable N-Key Rollover
+ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+
+ KEYBOARD_SHARED_EP = yes
+ MOUSE_SHARED_EP = yes
+
+ AUTOCORRECT_ENABLE = yes
+ CAPS_WORD_ENABLE = yes
+ SWAP_HANDS_ENABLE = yes
+ TAP_DANCE_ENABLE = yes
+ DEBOUNCE_TYPE = asym_eager_defer_pk
+ WPM_ENABLE = yes
+ LTO_ENABLE = no
+ # OPT = 3
+
+ CUSTOM_UNICODE_ENABLE = yes
+ CUSTOM_POINTING_DEVICE = yes
+ CUSTOM_SPLIT_TRANSPORT_SYNC = yes
+
+endif
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/halconf.h b/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/halconf.h
new file mode 100644
index 0000000000..135994a43c
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/halconf.h
@@ -0,0 +1,23 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_SPI TRUE
+#define HAL_USE_I2C TRUE
+
+#include_next "halconf.h"
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/keymap.c b/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/keymap.c
index 9cd21c3c1f..d4aa71440d 100644
--- a/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/keymap.c
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/keymap.c
@@ -112,7 +112,7 @@ bool oled_task_keymap(void) {
};
oled_write_raw_P(header_image, sizeof(header_image));
oled_set_cursor(7, 0);
- oled_write_P(PSTR("Rock On"), true);
+ oled_write_P(PSTR("Dilemma"), true);
render_default_layer_state(1, 1);
render_layer_state(1, 2);
@@ -158,3 +158,19 @@ bool oled_task_keymap(void) {
return false;
}
#endif
+
+
+#ifdef SWAP_HANDS_ENABLE
+const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+ /* Left hand, matrix positions */
+ {{0, 4}, {3, 4}, {2, 4}, {5, 4}, {4, 4}},
+ {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}},
+ {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}},
+ {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}},
+ /* Right hand, matrix positions */
+ {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}},
+ {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}},
+ {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}},
+ {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}},
+ };
+#endif
diff --git a/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/mcuconf.h b/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/mcuconf.h
new file mode 100644
index 0000000000..f9aa894665
--- /dev/null
+++ b/keyboards/bastardkb/dilemma/3x5_2/keymaps/drashna/mcuconf.h
@@ -0,0 +1,26 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next "mcuconf.h"
+
+#undef RP_SPI_USE_SPI1
+#define RP_SPI_USE_SPI1 TRUE
+
+#undef RP_I2C_USE_I2C1
+#define RP_I2C_USE_I2C1 TRUE