diff options
Diffstat (limited to 'keyboards/bastardkb/dilemma')
19 files changed, 1241 insertions, 0 deletions
diff --git a/keyboards/bastardkb/dilemma/config.h b/keyboards/bastardkb/dilemma/config.h new file mode 100644 index 0000000000..af59efb709 --- /dev/null +++ b/keyboards/bastardkb/dilemma/config.h @@ -0,0 +1,49 @@ +/* + * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com> + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* Key matrix configuration. */ + +#define MATRIX_ROWS 8 // Rows are doubled-up. +#define MATRIX_COLS 5 + +#define DIODE_DIRECTION ROW2COL + +// Set 0 if debouncing isn't needed. +#define DEBOUNCE 5 + +/* Pointing device configuration. */ + +// Enable use of pointing device on slave split. +#define SPLIT_POINTING_ENABLE + +// Pointing device is on the right split. +#define POINTING_DEVICE_RIGHT + +// Limits the frequency that the sensor is polled for motion. +#define POINTING_DEVICE_TASK_THROTTLE_MS 10 + +// Adjust trackpad rotation. +#define POINTING_DEVICE_ROTATION_90 + +// Configure for the Cirque model used on the Dilemma. +#define CIRQUE_PINNACLE_DIAMETER_MM 35 +#define CIRQUE_PINNACLE_CURVED_OVERLAY diff --git a/keyboards/bastardkb/dilemma/dilemma.c b/keyboards/bastardkb/dilemma/dilemma.c new file mode 100644 index 0000000000..b4d3ba5de1 --- /dev/null +++ b/keyboards/bastardkb/dilemma/dilemma.c @@ -0,0 +1,326 @@ +/* + * Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) + * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com> + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Publicw License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "dilemma.h" + +#ifdef CONSOLE_ENABLE +# include "print.h" +#endif // CONSOLE_ENABLE + +#ifdef POINTING_DEVICE_ENABLE +# ifndef DILEMMA_MINIMUM_DEFAULT_DPI +# define DILEMMA_MINIMUM_DEFAULT_DPI 400 +# endif // DILEMMA_MINIMUM_DEFAULT_DPI + +# ifndef DILEMMA_DEFAULT_DPI_CONFIG_STEP +# define DILEMMA_DEFAULT_DPI_CONFIG_STEP 200 +# endif // DILEMMA_DEFAULT_DPI_CONFIG_STEP + +# ifndef DILEMMA_MINIMUM_SNIPING_DPI +# define DILEMMA_MINIMUM_SNIPING_DPI 200 +# endif // DILEMMA_MINIMUM_SNIPING_DPI + +# ifndef DILEMMA_SNIPING_DPI_CONFIG_STEP +# define DILEMMA_SNIPING_DPI_CONFIG_STEP 100 +# endif // DILEMMA_SNIPING_DPI_CONFIG_STEP + +// Fixed DPI for drag-scroll. +# ifndef DILEMMA_DRAGSCROLL_DPI +# define DILEMMA_DRAGSCROLL_DPI 100 +# endif // DILEMMA_DRAGSCROLL_DPI + +# ifndef DILEMMA_DRAGSCROLL_BUFFER_SIZE +# define DILEMMA_DRAGSCROLL_BUFFER_SIZE 6 +# endif // !DILEMMA_DRAGSCROLL_BUFFER_SIZE + +typedef union { + uint8_t raw; + struct { + uint8_t pointer_default_dpi : 4; // 16 steps available. + uint8_t pointer_sniping_dpi : 2; // 4 steps available. + bool is_dragscroll_enabled : 1; + bool is_sniping_enabled : 1; + } __attribute__((packed)); +} dilemma_config_t; + +static dilemma_config_t g_dilemma_config = {0}; + +/** + * \brief Set the value of `config` from EEPROM. + * + * Note that `is_dragscroll_enabled` and `is_sniping_enabled` are purposefully + * ignored since we do not want to persist this state to memory. In practice, + * this state is always written to maximize write-performances. Therefore, we + * explicitly set them to `false` in this function. + */ +static void read_dilemma_config_from_eeprom(dilemma_config_t* config) { + config->raw = eeconfig_read_kb() & 0xff; + config->is_dragscroll_enabled = false; + config->is_sniping_enabled = false; +} + +/** + * \brief Save the value of `config` to eeprom. + * + * Note that all values are written verbatim, including whether drag-scroll + * and/or sniper mode are enabled. `read_dilemma_config_from_eeprom(…)` + * resets these 2 values to `false` since it does not make sense to persist + * these across reboots of the board. + */ +static void write_dilemma_config_to_eeprom(dilemma_config_t* config) { + eeconfig_update_kb(config->raw); +} + +/** \brief Return the current value of the pointer's default DPI. */ +static uint16_t get_pointer_default_dpi(dilemma_config_t* config) { + return (uint16_t)config->pointer_default_dpi * DILEMMA_DEFAULT_DPI_CONFIG_STEP + DILEMMA_MINIMUM_DEFAULT_DPI; +} + +/** \brief Return the current value of the pointer's sniper-mode DPI. */ +static uint16_t get_pointer_sniping_dpi(dilemma_config_t* config) { + return (uint16_t)config->pointer_sniping_dpi * DILEMMA_SNIPING_DPI_CONFIG_STEP + DILEMMA_MINIMUM_SNIPING_DPI; +} + +/** \brief Set the appropriate DPI for the input config. */ +static void maybe_update_pointing_device_cpi(dilemma_config_t* config) { + if (config->is_dragscroll_enabled) { + pointing_device_set_cpi(DILEMMA_DRAGSCROLL_DPI); + } else if (config->is_sniping_enabled) { + pointing_device_set_cpi(get_pointer_sniping_dpi(config)); + } else { + pointing_device_set_cpi(get_pointer_default_dpi(config)); + } +} + +/** + * \brief Update the pointer's default DPI to the next or previous step. + * + * Increases the DPI value if `forward` is `true`, decreases it otherwise. + * The increment/decrement steps are equal to DILEMMA_DEFAULT_DPI_CONFIG_STEP. + */ +static void step_pointer_default_dpi(dilemma_config_t* config, bool forward) { + config->pointer_default_dpi += forward ? 1 : -1; + maybe_update_pointing_device_cpi(config); +} + +/** + * \brief Update the pointer's sniper-mode DPI to the next or previous step. + * + * Increases the DPI value if `forward` is `true`, decreases it otherwise. + * The increment/decrement steps are equal to DILEMMA_SNIPING_DPI_CONFIG_STEP. + */ +static void step_pointer_sniping_dpi(dilemma_config_t* config, bool forward) { + config->pointer_sniping_dpi += forward ? 1 : -1; + maybe_update_pointing_device_cpi(config); +} + +uint16_t dilemma_get_pointer_default_dpi(void) { + return get_pointer_default_dpi(&g_dilemma_config); +} + +uint16_t dilemma_get_pointer_sniping_dpi(void) { + return get_pointer_sniping_dpi(&g_dilemma_config); +} + +void dilemma_cycle_pointer_default_dpi_noeeprom(bool forward) { + step_pointer_default_dpi(&g_dilemma_config, forward); +} + +void dilemma_cycle_pointer_default_dpi(bool forward) { + step_pointer_default_dpi(&g_dilemma_config, forward); + write_dilemma_config_to_eeprom(&g_dilemma_config); +} + +void dilemma_cycle_pointer_sniping_dpi_noeeprom(bool forward) { + step_pointer_sniping_dpi(&g_dilemma_config, forward); +} + +void dilemma_cycle_pointer_sniping_dpi(bool forward) { + step_pointer_sniping_dpi(&g_dilemma_config, forward); + write_dilemma_config_to_eeprom(&g_dilemma_config); +} + +bool dilemma_get_pointer_sniping_enabled(void) { + return g_dilemma_config.is_sniping_enabled; +} + +void dilemma_set_pointer_sniping_enabled(bool enable) { + g_dilemma_config.is_sniping_enabled = enable; + maybe_update_pointing_device_cpi(&g_dilemma_config); +} + +bool dilemma_get_pointer_dragscroll_enabled(void) { + return g_dilemma_config.is_dragscroll_enabled; +} + +void dilemma_set_pointer_dragscroll_enabled(bool enable) { + g_dilemma_config.is_dragscroll_enabled = enable; + maybe_update_pointing_device_cpi(&g_dilemma_config); +} + +void pointing_device_init_kb(void) { + maybe_update_pointing_device_cpi(&g_dilemma_config); + pointing_device_init_user(); +} + +/** + * \brief Augment the pointing device behavior. + * + * Implement drag-scroll. + */ +static void pointing_device_task_dilemma(report_mouse_t* mouse_report) { + static int16_t scroll_buffer_x = 0; + static int16_t scroll_buffer_y = 0; + if (g_dilemma_config.is_dragscroll_enabled) { +# ifdef DILEMMA_DRAGSCROLL_REVERSE_X + scroll_buffer_x -= mouse_report->x; +# else + scroll_buffer_x += mouse_report->x; +# endif // DILEMMA_DRAGSCROLL_REVERSE_X +# ifdef DILEMMA_DRAGSCROLL_REVERSE_Y + scroll_buffer_y -= mouse_report->y; +# else + scroll_buffer_y += mouse_report->y; +# endif // DILEMMA_DRAGSCROLL_REVERSE_Y + mouse_report->x = 0; + mouse_report->y = 0; + if (abs(scroll_buffer_x) > DILEMMA_DRAGSCROLL_BUFFER_SIZE) { + mouse_report->h = scroll_buffer_x > 0 ? 1 : -1; + scroll_buffer_x = 0; + } + if (abs(scroll_buffer_y) > DILEMMA_DRAGSCROLL_BUFFER_SIZE) { + mouse_report->v = scroll_buffer_y > 0 ? 1 : -1; + scroll_buffer_y = 0; + } + } +} + +report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { + if (is_keyboard_master()) { + pointing_device_task_dilemma(&mouse_report); + mouse_report = pointing_device_task_user(mouse_report); + } + return mouse_report; +} + +# if defined(POINTING_DEVICE_ENABLE) && !defined(NO_DILEMMA_KEYCODES) +/** \brief Whether SHIFT mod is enabled. */ +static bool has_shift_mod(void) { +# ifdef NO_ACTION_ONESHOT + return mod_config(get_mods()) & MOD_MASK_SHIFT; +# else + return mod_config(get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT; +# endif // NO_ACTION_ONESHOT +} +# endif // POINTING_DEVICE_ENABLE && !NO_DILEMMA_KEYCODES + +/** + * \brief Outputs the Dilemma configuration to console. + * + * Prints the in-memory configuration structure to console, for debugging. + * Includes: + * - raw value + * - drag-scroll: on/off + * - sniping: on/off + * - default DPI: internal table index/actual DPI + * - sniping DPI: internal table index/actual DPI + */ +static void debug_dilemma_config_to_console(dilemma_config_t* config) { +# ifdef CONSOLE_ENABLE + dprintf("(dilemma) process_record_kb: config = {\n" + "\traw = 0x%X,\n" + "\t{\n" + "\t\tis_dragscroll_enabled=%b\n" + "\t\tis_sniping_enabled=%b\n" + "\t\tdefault_dpi=0x%X (%ld)\n" + "\t\tsniping_dpi=0x%X (%ld)\n" + "\t}\n" + "}\n", + config->raw, config->is_dragscroll_enabled, config->is_sniping_enabled, config->pointer_default_dpi, get_pointer_default_dpi(config), config->pointer_sniping_dpi, get_pointer_sniping_dpi(config)); +# endif // CONSOLE_ENABLE +} + +bool process_record_kb(uint16_t keycode, keyrecord_t* record) { + if (!process_record_user(keycode, record)) { + debug_dilemma_config_to_console(&g_dilemma_config); + return false; + } +# ifdef POINTING_DEVICE_ENABLE +# ifndef NO_DILEMMA_KEYCODES + switch (keycode) { + case POINTER_DEFAULT_DPI_FORWARD: + if (record->event.pressed) { + // Step backward if shifted, forward otherwise. + dilemma_cycle_pointer_default_dpi(/* forward= */ !has_shift_mod()); + } + break; + case POINTER_DEFAULT_DPI_REVERSE: + if (record->event.pressed) { + // Step forward if shifted, backward otherwise. + dilemma_cycle_pointer_default_dpi(/* forward= */ has_shift_mod()); + } + break; + case POINTER_SNIPING_DPI_FORWARD: + if (record->event.pressed) { + // Step backward if shifted, forward otherwise. + dilemma_cycle_pointer_sniping_dpi(/* forward= */ !has_shift_mod()); + } + break; + case POINTER_SNIPING_DPI_REVERSE: + if (record->event.pressed) { + // Step forward if shifted, backward otherwise. + dilemma_cycle_pointer_sniping_dpi(/* forward= */ has_shift_mod()); + } + break; + case SNIPING_MODE: + dilemma_set_pointer_sniping_enabled(record->event.pressed); + break; + case SNIPING_MODE_TOGGLE: + if (record->event.pressed) { + dilemma_set_pointer_sniping_enabled(!dilemma_get_pointer_sniping_enabled()); + } + break; + case DRAGSCROLL_MODE: + dilemma_set_pointer_dragscroll_enabled(record->event.pressed); + break; + case DRAGSCROLL_MODE_TOGGLE: + if (record->event.pressed) { + dilemma_set_pointer_dragscroll_enabled(!dilemma_get_pointer_dragscroll_enabled()); + } + break; + } +# endif // !NO_DILEMMA_KEYCODES +# endif // POINTING_DEVICE_ENABLE + debug_dilemma_config_to_console(&g_dilemma_config); + return true; +} + +void eeconfig_init_kb(void) { + g_dilemma_config.raw = 0; + g_dilemma_config.pointer_default_dpi = 4; + write_dilemma_config_to_eeprom(&g_dilemma_config); + maybe_update_pointing_device_cpi(&g_dilemma_config); + eeconfig_init_user(); +} + +void matrix_init_kb(void) { + read_dilemma_config_from_eeprom(&g_dilemma_config); + matrix_init_user(); +} +#endif // POINTING_DEVICE_ENABLE diff --git a/keyboards/bastardkb/dilemma/dilemma.h b/keyboards/bastardkb/dilemma/dilemma.h new file mode 100644 index 0000000000..fbf54c804b --- /dev/null +++ b/keyboards/bastardkb/dilemma/dilemma.h @@ -0,0 +1,134 @@ +/** + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +// clang-format off +#define LAYOUT_split_3x5_2( \ + k00, k01, k02, k03, k04, k44, k43, k42, k41, k40, \ + k10, k11, k12, k13, k14, k54, k53, k52, k51, k50, \ + k20, k21, k22, k23, k24, k64, k63, k62, k61, k60, \ + k30, k32, k72, k70 \ +) \ +{ \ + { k00, k01, k02, k03, k04 }, \ + { k10, k11, k12, k13, k14 }, \ + { k20, k21, k22, k23, k24 }, \ + { k30, KC_NO, k32, KC_NO, KC_NO }, \ + { k40, k41, k42, k43, k44 }, \ + { k50, k51, k52, k53, k54 }, \ + { k60, k61, k62, k63, k64 }, \ + { k70, KC_NO, k72, KC_NO, KC_NO }, \ +} +// clang-format on + +#ifdef POINTING_DEVICE_ENABLE +# ifndef NO_DILEMMA_KEYCODES +enum dilemma_keycodes { +# ifdef VIA_ENABLE + POINTER_DEFAULT_DPI_FORWARD = USER00, +# else + POINTER_DEFAULT_DPI_FORWARD = SAFE_RANGE, +# endif // VIA_ENABLE + POINTER_DEFAULT_DPI_REVERSE, + POINTER_SNIPING_DPI_FORWARD, + POINTER_SNIPING_DPI_REVERSE, + SNIPING_MODE, + SNIPING_MODE_TOGGLE, + DRAGSCROLL_MODE, + DRAGSCROLL_MODE_TOGGLE, + DILEMMA_SAFE_RANGE, +}; + +# define DPI_MOD POINTER_DEFAULT_DPI_FORWARD +# define DPI_RMOD POINTER_DEFAULT_DPI_REVERSE +# define S_D_MOD POINTER_SNIPING_DPI_FORWARD +# define S_D_RMOD POINTER_SNIPING_DPI_REVERSE +# define SNIPING SNIPING_MODE +# define SNP_TOG SNIPING_MODE_TOGGLE +# define DRGSCRL DRAGSCROLL_MODE +# define DRG_TOG DRAGSCROLL_MODE_TOGGLE +# endif // !NO_DILEMMA_KEYCODES + +/** \brief Return the current DPI value for the pointer's default mode. */ +uint16_t dilemma_get_pointer_default_dpi(void); + +/** + * \brief Update the pointer's default DPI to the next or previous step. + * + * Increases the DPI value if `forward` is `true`, decreases it otherwise. + * The increment/decrement steps are equal to DILEMMA_DEFAULT_DPI_CONFIG_STEP. + * + * The new value is persisted in EEPROM. + */ +void dilemma_cycle_pointer_default_dpi(bool forward); + +/** + * \brief Same as `dilemma_cycle_pointer_default_dpi`, but do not write to + * EEPROM. + * + * This means that reseting the board will revert the value to the last + * persisted one. + */ +void dilemma_cycle_pointer_default_dpi_noeeprom(bool forward); + +/** \brief Return the current DPI value for the pointer's sniper-mode. */ +uint16_t dilemma_get_pointer_sniping_dpi(void); + +/** + * \brief Update the pointer's sniper-mode DPI to the next or previous step. + * + * Increases the DPI value if `forward` is `true`, decreases it otherwise. + * The increment/decrement steps are equal to DILEMMA_SNIPING_DPI_CONFIG_STEP. + * + * The new value is persisted in EEPROM. + */ +void dilemma_cycle_pointer_sniping_dpi(bool forward); + +/** + * \brief Same as `dilemma_cycle_pointer_sniping_dpi`, but do not write to + * EEPROM. + * + * This means that reseting the board will revert the value to the last + * persisted one. + */ +void dilemma_cycle_pointer_sniping_dpi_noeeprom(bool forward); + +/** \brief Whether sniper-mode is enabled. */ +bool dilemma_get_pointer_sniping_enabled(void); + +/** + * \brief Enable/disable sniper mode. + * + * When sniper mode is enabled the dpi is reduced to slow down the pointer for + * more accurate movements. + */ +void dilemma_set_pointer_sniping_enabled(bool enable); + +/** \brief Whether drag-scroll is enabled. */ +bool dilemma_get_pointer_dragscroll_enabled(void); + +/** + * \brief Enable/disable drag-scroll mode. + * + * When drag-scroll mode is enabled, horizontal and vertical pointer movements + * are translated into horizontal and vertical scroll movements. + */ +void dilemma_set_pointer_dragscroll_enabled(bool enable); +#endif // POINTING_DEVICE_ENABLE diff --git a/keyboards/bastardkb/dilemma/elitec/config.h b/keyboards/bastardkb/dilemma/elitec/config.h new file mode 100644 index 0000000000..0f26e46fdb --- /dev/null +++ b/keyboards/bastardkb/dilemma/elitec/config.h @@ -0,0 +1,37 @@ +/* + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { D4, C6, F5, F7 } +#define MATRIX_COL_PINS \ + { B4, B5, E6, D7, F6 } + +/* Handedness. */ +#define MASTER_RIGHT + +// To use the handedness pin, resistors need to be installed on the PCB. +// If so, uncomment the following code, and undefine MASTER_RIGHT above. +//#define SPLIT_HAND_PIN F4 +// If you've soldered the handedness pull-up on the upper side instead of the +// left one, uncomment the following line. +//#define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left. + +/* serial.c configuration (for split keyboard). */ +#define SOFT_SERIAL_PIN D2 diff --git a/keyboards/bastardkb/dilemma/elitec/info.json b/keyboards/bastardkb/dilemma/elitec/info.json new file mode 100644 index 0000000000..f5916f3ab1 --- /dev/null +++ b/keyboards/bastardkb/dilemma/elitec/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Dilemma Elite-C", + "usb": { + "device_version": "1.0.0", + }, +} diff --git a/keyboards/bastardkb/dilemma/elitec/rules.mk b/keyboards/bastardkb/dilemma/elitec/rules.mk new file mode 100644 index 0000000000..e8326bcf09 --- /dev/null +++ b/keyboards/bastardkb/dilemma/elitec/rules.mk @@ -0,0 +1,5 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu diff --git a/keyboards/bastardkb/dilemma/info.json b/keyboards/bastardkb/dilemma/info.json new file mode 100644 index 0000000000..6764219969 --- /dev/null +++ b/keyboards/bastardkb/dilemma/info.json @@ -0,0 +1,46 @@ +{ + "url": "https://bastardkb.com/dilemma", + "usb": { + "pid": "0x1835", + }, + "layouts": { + "LAYOUT_split_3x5_2": { + "layout": [ + {"label":"L00", "x":0, "y":0}, + {"label":"L01", "x":1, "y":0}, + {"label":"L02", "x":2, "y":0}, + {"label":"L03", "x":3, "y":0}, + {"label":"L04", "x":4, "y":0}, + {"label":"R00", "x":11, "y":0}, + {"label":"R01", "x":12, "y":0}, + {"label":"R02", "x":13, "y":0}, + {"label":"R03", "x":14, "y":0}, + {"label":"R04", "x":15, "y":0}, + {"label":"L10", "x":0, "y":1}, + {"label":"L11", "x":1, "y":1}, + {"label":"L12", "x":2, "y":1}, + {"label":"L13", "x":3, "y":1}, + {"label":"L14", "x":4, "y":1}, + {"label":"R10", "x":11, "y":1}, + {"label":"R11", "x":12, "y":1}, + {"label":"R12", "x":13, "y":1}, + {"label":"R13", "x":14, "y":1}, + {"label":"R14", "x":15, "y":1}, + {"label":"L20", "x":0, "y":2}, + {"label":"L21", "x":1, "y":2}, + {"label":"L22", "x":2, "y":2}, + {"label":"L23", "x":3, "y":2}, + {"label":"L24", "x":4, "y":2}, + {"label":"R20", "x":11, "y":2}, + {"label":"R21", "x":12, "y":2}, + {"label":"R22", "x":13, "y":2}, + {"label":"R23", "x":14, "y":2}, + {"label":"R24", "x":15, "y":2}, + {"label":"L30", "x":4, "y":3}, + {"label":"L32", "x":5, "y":3}, + {"label":"R32", "x":10, "y":3}, + {"label":"R30", "x":11, "y":3} + ] + } + } +} diff --git a/keyboards/bastardkb/dilemma/keymaps/bstiq/README.md b/keyboards/bastardkb/dilemma/keymaps/bstiq/README.md new file mode 100644 index 0000000000..df1f43cbcb --- /dev/null +++ b/keyboards/bastardkb/dilemma/keymaps/bstiq/README.md @@ -0,0 +1,3 @@ +# Dilemma @bstiq keymap + +Inspired from Miryoku, using home-rows. diff --git a/keyboards/bastardkb/dilemma/keymaps/bstiq/config.h b/keyboards/bastardkb/dilemma/keymaps/bstiq/config.h new file mode 100644 index 0000000000..b2e49c8c6e --- /dev/null +++ b/keyboards/bastardkb/dilemma/keymaps/bstiq/config.h @@ -0,0 +1,153 @@ +/** + * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com> + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#ifdef VIA_ENABLE +/* Via configuration. */ +# define DYNAMIC_KEYMAP_LAYER_COUNT 8 +#endif // VIA_ENABLE + +/** + * Configure the global tapping term (default: 200ms). + * If you have a lot of accidental mod activations, crank up the tapping term. + * + * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term + */ +#ifndef TAPPING_TERM +# define TAPPING_TERM 160 +#endif // TAPPING_TERM + +// disable trackpad taps +// #define CIRQUE_PINNACLE_TAPPING_TERM 0 + +/** + * Enable rapid switch from tap to hold. Disable auto-repeat when pressing key + * twice, except for one-shot keys. + * + * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-force-hold + */ +#define TAPPING_FORCE_HOLD + +/* + * Tap-or-Hold decision modes. + * + * Note that the following flags behave differently when combined (ie. when 2 or + * more are enabled). + * + * See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold + * decision modes. + */ + +/** + * Faster tap-hold trigger. + * + * Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`: + * Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 âžž ae + * With `PERMISSIVE_HOLD`, within `TAPPING_TERM`: + * Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 âžž Mod+e + * + * See docs.qmk.fm/using-qmk/software-features/tap_hold#permissive-hold + */ +#define PERMISSIVE_HOLD + +/** + * Prevent normal rollover on alphas from accidentally triggering mods. + * + * Ignores key presses that interrupt a mod-tap. Must-have for Home Row mod. + * + * Without `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`: + * Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 âžž Mod+e + * With `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`: + * Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 âžž ae + * + * See docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt + */ +#define IGNORE_MOD_TAP_INTERRUPT + +/** Dilemma-specific features. */ + +#ifdef POINTING_DEVICE_ENABLE +// Flip horizontal direction for drag-scroll. +# define DILEMMA_DRAGSCROLL_REVERSE_X +// #define DILEMMA_DRAGSCROLL_REVERSE_Y +#endif // POINTING_DEVICE_ENABLE + +/** RGB Matrix. */ + +#ifdef RGB_MATRIX_ENABLE +// Enable all animations on ARM boards since they have plenty of memory +// available for it. +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +// Limit maximum brightness to keep power consumption reasonable, and avoid +// disconnects. +# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64 + +// Rainbow swirl as startup mode. +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT + +// Slow swirl at startup. +# define RGB_MATRIX_STARTUP_SPD 32 + +// Startup values. +# define RGB_MATRIX_STARTUP_HUE 0 +# define RGB_MATRIX_STARTUP_SAT 255 +# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS +# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL +#endif // RGB_MATRIX_ENABLE diff --git a/keyboards/bastardkb/dilemma/keymaps/bstiq/keymap.c b/keyboards/bastardkb/dilemma/keymaps/bstiq/keymap.c new file mode 100644 index 0000000000..f8396cb1c2 --- /dev/null +++ b/keyboards/bastardkb/dilemma/keymaps/bstiq/keymap.c @@ -0,0 +1,224 @@ +/** + * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com> + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +enum bstiq_layers { + LAYER_BASE = 0, + LAYER_MBO, + LAYER_MEDIA, + LAYER_NAV, + LAYER_MOUSE, + LAYER_SYM, + LAYER_NUM, + LAYER_FUN, +}; + +// Automatically enable sniping when the mouse layer is on. +#define DILEMMA_AUTO_SNIPING_ON_LAYER LAYER_MOUSE + +#define BSP_NAV LT(LAYER_NAV, KC_BSPC) +#define ENT_MBO LT(LAYER_MBO, KC_ENT) +#define TAB_MED LT(LAYER_MEDIA, KC_TAB) +#define ESC_SYM LT(LAYER_SYM, KC_ESC) +#define SPC_NUM LT(LAYER_NUM, KC_SPC) +#define SPC_MBO LT(LAYER_MBO, KC_SPC) +#define MOUSE(KC) LT(LAYER_MOUSE, KC) + +#define USR_RDO KC_AGAIN +#define USR_PST S(KC_INS) +#define USR_CPY C(KC_INS) +#define USR_CUT S(KC_DEL) +#define USR_UND KC_UNDO + +#define MS_L KC_MS_LEFT +#define MS_R KC_MS_RIGHT +#define MS_D KC_MS_DOWN +#define MS_U KC_MS_UP + +#define WH_L KC_MS_WH_LEFT +#define WH_R KC_MS_WH_RIGHT +#define WH_D KC_MS_WH_DOWN +#define WH_U KC_MS_WH_UP + +// clang-format off +/** Convenience macro. */ +#define _KC_LAYOUT_wrapper( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + ...) \ + KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, \ + KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, \ + KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, \ + __VA_ARGS__ +#define KC_LAYOUT_wrapper(...) _KC_LAYOUT_wrapper(__VA_ARGS__) + +/** Base layer with BÉPO layout. */ +#define LAYOUT_LAYER_BASE_BEPO KC_LAYOUT_wrapper( \ + B, W, P, O, QUOT, DOT, V, D, L, J, \ + A, U, I, E, COMM, C, T, S, R, N, \ + Z, Y, X, SLSH, K, M, Q, G, H, F, \ + SPC_MBO, TAB_MED, ESC_SYM, SPC_NUM) + +/** Convenience key shorthands. */ +#define U_NA KC_NO // Present but not available for use. +#define U_NU KC_NO // Available but not used. + +/** Convenience row shorthands. */ +#define ________________HOME_ROW_NA________________ U_NA, U_NA, U_NA, U_NA, U_NA +#define ______________HOME_ROW_GASC_L______________ KC_LGUI, KC_LALT, KC_LSFT, KC_LCTL, U_NA +#define ______________HOME_ROW_ALGR_L______________ U_NA, KC_ALGR, U_NA, U_NA, U_NA +#define ______________HOME_ROW_GASC_R______________ U_NA, KC_LCTL, KC_LSFT, KC_LALT, KC_LGUI +#define ______________HOME_ROW_ALGR_R______________ U_NA, U_NA, U_NA, KC_ALGR, U_NA + +/** Layers. */ + +// Buttons. +#define LAYOUT_LAYER_MBO \ + ________________HOME_ROW_NA________________, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \ + ______________HOME_ROW_GASC_L______________, KC_BSPC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, \ + KC_BTN3, KC_ALGR, KC_BTN2, KC_BTN1, U_NA, KC_DEL, KC_HOME, KC_PGDN, KC_PGUP, KC_END, \ + U_NA, U_NA, KC_ENT, KC_ENT + +// Media. +#define LAYOUT_LAYER_MEDIA \ + ________________HOME_ROW_NA________________, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \ + ______________HOME_ROW_GASC_L______________, U_NU, MS_L, MS_D, MS_U, MS_R, \ + ______________HOME_ROW_ALGR_L______________, U_NU, WH_L, WH_D, WH_U, WH_R, \ + U_NA, U_NA, KC_BTN1, KC_BTN3 + +// Navigation. +#define LAYOUT_LAYER_NAV \ + ________________HOME_ROW_NA________________, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, \ + ______________HOME_ROW_GASC_L______________, U_NU, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, \ + ______________HOME_ROW_ALGR_L______________, U_NU, U_NU, U_NU, U_NU, U_NU, \ + U_NA, U_NA, KC_MSTP, KC_MPLY + +// Mouse. +#define LAYOUT_LAYER_MOUSE \ + S_D_MOD, USR_PST, USR_CPY, USR_CUT, USR_UND, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \ + DPI_MOD, DRGSCRL, KC_LSFT, DRGSCRL, _______, U_NU, MS_L, MS_D, MS_U, MS_R, \ + USR_RDO, USR_PST, USR_CPY, KC_BTN3, USR_UND, U_NU, WH_L, WH_D, WH_U, WH_R, \ + KC_BTN1, KC_BTN2, KC_BTN1, KC_BTN3 + +// Symbols. +#define LAYOUT_LAYER_SYM \ + KC_LCBR, KC_AMPR, KC_ASTR, KC_LPRN, KC_RCBR, ________________HOME_ROW_NA________________, \ + KC_COLN, KC_DLR, KC_PERC, KC_CIRC, KC_PLUS, ______________HOME_ROW_GASC_R______________, \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_MINS, ______________HOME_ROW_ALGR_R______________, \ + KC_RPRN, KC_LPRN, U_NA, U_NA + +// Numerals. +#define LAYOUT_LAYER_NUM \ + KC_LBRC, KC_7, KC_8, KC_9, KC_RBRC, ________________HOME_ROW_NA________________, \ + KC_SCLN, KC_4, KC_5, KC_6, KC_EQL, ______________HOME_ROW_GASC_R______________, \ + KC_GRV, KC_1, KC_2, KC_3, KC_UNDS, ______________HOME_ROW_ALGR_R______________, \ + KC_0, KC_MINS, U_NA, U_NA + +// Function keys. +#define LAYOUT_LAYER_FUN \ + KC_F12, KC_F7, KC_F8, KC_F9, KC_PSCR, ________________HOME_ROW_NA________________, \ + KC_F11, KC_F4, KC_F5, KC_F6, KC_SLCK, ______________HOME_ROW_GASC_R______________, \ + KC_F10, KC_F1, KC_F2, KC_F3, KC_PAUS, ______________HOME_ROW_ALGR_R______________,\ + KC_APP, KC_TAB, U_NA, U_NA + +/** + * Add Home Row mod to a layout. + * + * Expects a 10-key per row layout. Adds support for GASC (Gui, Alt, Shift, Ctl) + * home row. The layout passed in parameter must contain at least 20 keycodes. + * + * This is meant to be used with `LAYOUT_LAYER_BASE_BEPO` defined above, eg.: + * + * HOME_ROW_MOD_GASC(LAYOUT_LAYER_BASE_BEPO) + */ +#define _HOME_ROW_MOD_GASC( \ + L00, L01, L02, L03, L04, R05, R06, R07, R08, R09, \ + L10, L11, L12, L13, L14, R15, R16, R17, R18, R19, \ + ...) \ + L00, L01, L02, L03, L04, \ + R05, R06, R07, R08, R09, \ + LGUI_T(L10), LALT_T(L11), LSFT_T(L12), LCTL_T(L13), L14, \ + R15, RCTL_T(R16), RSFT_T(R17), LALT_T(R18), RGUI_T(R19), \ + __VA_ARGS__ +#define HOME_ROW_MOD_GASC(...) _HOME_ROW_MOD_GASC(__VA_ARGS__) + +/** + * Add mouse layer keys to a layout. + * + * Expects a 10-key per row layout. The layout passed in parameter must contain + * at least 30 keycodes. + * + * This is meant to be used with `LAYOUT_LAYER_BASE_BEPO` defined above, eg.: + * + * MOUSE_MOD(LAYOUT_LAYER_BASE_BEPO) + */ +#define _MOUSE_MOD( \ + L00, L01, L02, L03, L04, R05, R06, R07, R08, R09, \ + L10, L11, L12, L13, L14, R15, R16, R17, R18, R19, \ + L20, L21, L22, L23, L24, R25, R26, R27, R28, R29, \ + ...) \ + L00, L01, L02, L03, L04, \ + R05, R06, R07, R08, R09, \ + L10, L11, L12, L13, L14, \ + R15, R16, R17, R18, R19, \ + L20, MOUSE(L21), L22, L23, L24, \ + R25, R26, R27, R28, MOUSE(R29), \ + __VA_ARGS__ +#define MOUSE_MOD(...) _MOUSE_MOD(__VA_ARGS__) + +#define LAYOUT_wrapper(...) LAYOUT_split_3x5_2(__VA_ARGS__) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [LAYER_BASE] = LAYOUT_wrapper( + MOUSE_MOD(HOME_ROW_MOD_GASC(LAYOUT_LAYER_BASE_BEPO)) + ), + [LAYER_MBO] = LAYOUT_wrapper(LAYOUT_LAYER_MBO), + [LAYER_MEDIA] = LAYOUT_wrapper(LAYOUT_LAYER_MEDIA), + [LAYER_NAV] = LAYOUT_wrapper(LAYOUT_LAYER_NAV), + [LAYER_MOUSE] = LAYOUT_wrapper(LAYOUT_LAYER_MOUSE), + [LAYER_SYM] = LAYOUT_wrapper(LAYOUT_LAYER_SYM), + [LAYER_NUM] = LAYOUT_wrapper(LAYOUT_LAYER_NUM), + [LAYER_FUN] = LAYOUT_wrapper(LAYOUT_LAYER_FUN), +}; +// clang-format on + +#if defined(POINTING_DEVICE_ENABLE) && defined(DILEMMA_AUTO_SNIPING_ON_LAYER) +layer_state_t layer_state_set_kb(layer_state_t state) { + state = layer_state_set_user(state); + dilemma_set_pointer_sniping_enabled(layer_state_cmp(state, DILEMMA_AUTO_SNIPING_ON_LAYER)); + return state; +} +#endif // POINTING_DEVICE_ENABLE && DILEMMA_AUTO_SNIPING_ON_LAYER + +#ifdef RGB_MATRIX_ENABLE +// Forward-declare this helper function since it is defined in rgb_matrix.c. +void rgb_matrix_update_pwm_buffers(void); +#endif + +void shutdown_user(void) { +#ifdef RGBLIGHT_ENABLE + rgblight_enable_noeeprom(); + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); + rgblight_setrgb_red(); +#endif // RGBLIGHT_ENABLE +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_set_color_all(RGB_RED); + rgb_matrix_update_pwm_buffers(); +#endif // RGB_MATRIX_ENABLE +} diff --git a/keyboards/bastardkb/dilemma/keymaps/default/keymap.c b/keyboards/bastardkb/dilemma/keymaps/default/keymap.c new file mode 100644 index 0000000000..3f77ebcabb --- /dev/null +++ b/keyboards/bastardkb/dilemma/keymaps/default/keymap.c @@ -0,0 +1,84 @@ +/** + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +enum charybdis_keymap_layers { + LAYER_BASE = 0, + LAYER_NAV, + LAYER_SYM, + LAYER_NUM, +}; + +#define NAV MO(LAYER_NAV) +#define SYM MO(LAYER_SYM) + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [LAYER_BASE] = LAYOUT_split_3x5_2( + // â•â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â•® â•â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â•® + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯ + NAV, CAPSWRD, KC_SPC, SYM + // ╰──────────────────╯ ╰──────────────────╯ + ), + + [LAYER_NAV] = LAYOUT_split_3x5_2( + // â•â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â•® â•â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â•® + KC_TAB, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU, XXXXXXX, KC_HOME, KC_UP, KC_END, KC_DEL, + // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤ + KC_LSFT, KC_LCTL, KC_LALT, KC_RGUI, KC_VOLD, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_BSPC, + // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤ + QK_BOOT, EEP_RST, KC_MPRV, KC_MNXT, KC_MPLY, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, KC_ENT, + // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯ + _______, KC_LSFT, KC_SPC, _______ + // ╰──────────────────╯ ╰──────────────────╯ + ), + + [LAYER_SYM] = LAYOUT_split_3x5_2( + // â•â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â•® â•â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â•® + KC_ESC, KC_LBRC, KC_LCBR, KC_LPRN, KC_TILD, KC_CIRC, KC_RPRN, KC_RCBR, KC_RBRC, KC_GRV, + // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤ + KC_MINS, KC_ASTR, KC_EQL, KC_UNDS, KC_DLR, KC_HASH, KC_RGUI, KC_RALT, KC_RCTL, KC_RSFT, + // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤ + KC_PLUS, KC_PIPE, KC_AT, KC_SLSH, KC_PERC, _______, KC_BSLS, KC_AMPR, KC_QUES, KC_EXLM, + // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯ + _______, KC_LSFT, KC_SPC, _______ + // ╰──────────────────╯ ╰──────────────────╯ + ), + + [LAYER_NUM] = LAYOUT_split_3x5_2( + // â•â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â•® â•â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â•® + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤ + KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, KC_F11, KC_F12, KC_RGUI, KC_RALT, KC_RCTL, KC_RSFT, + // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯ + _______, KC_LSFT, KC_SPC, _______ + // ╰──────────────────╯ ╰──────────────────╯ + ), +}; +// clang-format on + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, LAYER_NAV, LAYER_SYM, LAYER_NUM); +} diff --git a/keyboards/bastardkb/dilemma/readme.md b/keyboards/bastardkb/dilemma/readme.md new file mode 100644 index 0000000000..ecd1f9f1c9 --- /dev/null +++ b/keyboards/bastardkb/dilemma/readme.md @@ -0,0 +1,14 @@ +# Dilemma + +A very small keyboard made for ergonomic enthusiasts. + +- Keyboard Maintainer: [Bastard Keyboards](https://github.com/Bastardkb/) +- Hardware Supported: elite-C V4, Splinky +- Hardware Availability: [Bastardkb.com](https://bastardkb.com/) + +Make example for this keyboard (after setting up your build environment): + + make bastardkb/dilemma/elitec:default + make bastardkb/dilemma/splinky:default + +See the [keyboard build instructions](http://docs.bastardkb.com/) diff --git a/keyboards/bastardkb/dilemma/rules.mk b/keyboards/bastardkb/dilemma/rules.mk new file mode 100644 index 0000000000..1a6fc9e72c --- /dev/null +++ b/keyboards/bastardkb/dilemma/rules.mk @@ -0,0 +1,23 @@ +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +AUDIO_SUPPORTED = no # Audio is not supported +RGB_MATRIX_SUPPORTED = no # RGB matrix is supported and enabled by default +RGBLIGHT_SUPPORTED = no # RGB underglow is supported, but not enabled by default +RGB_MATRIX_ENABLE = no # Enable keyboard RGB matrix functionality + +POINTING_DEVICE_ENABLE = yes +POINTING_DEVICE_DRIVER = cirque_pinnacle_i2c + +SPLIT_KEYBOARD = yes +LAYOUTS = split_3x5_2 diff --git a/keyboards/bastardkb/dilemma/splinky/config.h b/keyboards/bastardkb/dilemma/splinky/config.h new file mode 100644 index 0000000000..80c9e42224 --- /dev/null +++ b/keyboards/bastardkb/dilemma/splinky/config.h @@ -0,0 +1,46 @@ +/* + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { GP4, GP5, GP28, GP26 } +#define MATRIX_COL_PINS \ + { GP8, GP9, GP7, GP6, GP27 } + +/* Handedness. */ +#define MASTER_RIGHT + +// To use the handedness pin, resistors need to be installed on the PCB. +// If so, uncomment the following code, and undefine MASTER_RIGHT above. +//#define SPLIT_HAND_PIN GP29 +// If you've soldered the handedness pull-up on the upper side instead of the +// left one, uncomment the following line. +//#define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left. + +/* serial.c configuration (for split keyboard). */ +#define SOFT_SERIAL_PIN GP1 + +/* CRC. */ +#define CRC8_USE_TABLE +#define CRC8_OPTIMIZE_SPEED + +/* Reset. */ +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17 +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U diff --git a/keyboards/bastardkb/dilemma/splinky/halconf.h b/keyboards/bastardkb/dilemma/splinky/halconf.h new file mode 100644 index 0000000000..a4c25c090a --- /dev/null +++ b/keyboards/bastardkb/dilemma/splinky/halconf.h @@ -0,0 +1,21 @@ +/* Copyright 2022 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define HAL_USE_I2C TRUE + +#include_next "halconf.h" diff --git a/keyboards/bastardkb/dilemma/splinky/info.json b/keyboards/bastardkb/dilemma/splinky/info.json new file mode 100644 index 0000000000..07ee320bb9 --- /dev/null +++ b/keyboards/bastardkb/dilemma/splinky/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Dilemma Splinky", + "usb": { + "device_version": "1.0.0", + }, +} diff --git a/keyboards/bastardkb/dilemma/splinky/mcuconf.h b/keyboards/bastardkb/dilemma/splinky/mcuconf.h new file mode 100644 index 0000000000..5e47eac54f --- /dev/null +++ b/keyboards/bastardkb/dilemma/splinky/mcuconf.h @@ -0,0 +1,23 @@ +/* + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include_next "mcuconf.h" + +#undef RP_I2C_USE_I2C1 +#define RP_I2C_USE_I2C1 TRUE diff --git a/keyboards/bastardkb/dilemma/splinky/rules.mk b/keyboards/bastardkb/dilemma/splinky/rules.mk new file mode 100644 index 0000000000..9c593c6ed8 --- /dev/null +++ b/keyboards/bastardkb/dilemma/splinky/rules.mk @@ -0,0 +1,9 @@ +# MCU name +MCU = RP2040 + +# Bootloader selection +BOOTLOADER = rp2040 + +# RP2040-specific options +PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS. +SERIAL_DRIVER = vendor diff --git a/keyboards/bastardkb/dilemma/splinky/splinky.c b/keyboards/bastardkb/dilemma/splinky/splinky.c new file mode 100644 index 0000000000..f38fe43818 --- /dev/null +++ b/keyboards/bastardkb/dilemma/splinky/splinky.c @@ -0,0 +1,32 @@ +/* + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "quantum.h" + +// Forward declare RP2040 SDK declaration. +void gpio_init(uint gpio); + +void keyboard_pre_init_user(void) { + // Ensures that GP26 through GP29 are initialized as digital inputs (as + // opposed to analog inputs). These GPIOs are shared with A0 through A3, + // respectively. On RP2040-B2 and later, the digital inputs are disabled by + // default (see RP2040-E6). + gpio_init(GP26); + gpio_init(GP27); + gpio_init(GP28); + gpio_init(GP29); +} |