diff options
Diffstat (limited to 'keyboards/bastardkb/charybdis/4x6/v2')
7 files changed, 193 insertions, 0 deletions
diff --git a/keyboards/bastardkb/charybdis/4x6/v2/elitec/config.h b/keyboards/bastardkb/charybdis/4x6/v2/elitec/config.h new file mode 100644 index 0000000000..891e511ccb --- /dev/null +++ b/keyboards/bastardkb/charybdis/4x6/v2/elitec/config.h @@ -0,0 +1,36 @@ +/* + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { F4, F7, C6, D4, B5 } +#define MATRIX_COL_PINS \ + { F6, F5, B6, D7, E6, B4 } + +/* Handedness. */ +#define MASTER_RIGHT + +/* serial.c configuration (for split keyboard). */ +#define SOFT_SERIAL_PIN D2 + +/* RGB settings. */ +#define RGB_DI_PIN D3 + +/* PMW3360 settings. */ +#define PMW33XX_CS_PIN F0 diff --git a/keyboards/bastardkb/charybdis/4x6/v2/elitec/info.json b/keyboards/bastardkb/charybdis/4x6/v2/elitec/info.json new file mode 100644 index 0000000000..151c0e1ca3 --- /dev/null +++ b/keyboards/bastardkb/charybdis/4x6/v2/elitec/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Charybdis (4x6) Elite-C", + "usb": { + "device_version": "2.0.0", + }, +} diff --git a/keyboards/bastardkb/charybdis/4x6/v2/elitec/rules.mk b/keyboards/bastardkb/charybdis/4x6/v2/elitec/rules.mk new file mode 100644 index 0000000000..fa5fe80405 --- /dev/null +++ b/keyboards/bastardkb/charybdis/4x6/v2/elitec/rules.mk @@ -0,0 +1,36 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +AUDIO_SUPPORTED = no # Audio is not supported. +RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default. +RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default. +RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality +RGB_MATRIX_DRIVER = WS2812 + +# Charybdis is a split 4x6 keyboard with a maximum of 5 thumb keys (3 on the +# trackball side). +SPLIT_KEYBOARD = yes + +POINTING_DEVICE_ENABLE = yes # Enable trackball +POINTING_DEVICE_DRIVER = pmw3360 +MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint + +# Enable link-time optimization by default. The Charybdis packs a lot of +# features (RGB, Via, trackball) in a small atmega32u4 package. +LTO_ENABLE = yes diff --git a/keyboards/bastardkb/charybdis/4x6/v2/splinky/config.h b/keyboards/bastardkb/charybdis/4x6/v2/splinky/config.h new file mode 100644 index 0000000000..e17ec49726 --- /dev/null +++ b/keyboards/bastardkb/charybdis/4x6/v2/splinky/config.h @@ -0,0 +1,50 @@ +/* + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { GP29, GP26, GP5, GP4, GP9 } +#define MATRIX_COL_PINS \ + { GP27, GP28, GP15, GP6, GP7, GP8 } + +/* Handedness. */ +#define MASTER_RIGHT + +// To use the handedness pin, resistors need to be installed on the adapter PCB. +// If so, uncomment the following code, and undefine MASTER_RIGHT above. +// #define SPLIT_HAND_PIN GP13 +// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left. + +/* serial.c configuration (for split keyboard). */ +#define SOFT_SERIAL_PIN GP1 + +/* RGB settings. */ +#define RGB_DI_PIN GP0 + +/* SPI & PMW3360 settings. */ +#define SPI_DRIVER SPID0 +#define SPI_SCK_PIN GP18 +#define SPI_MOSI_PIN GP19 +#define SPI_MISO_PIN GP20 +#define PMW33XX_CS_PIN GP14 + +/* Reset. */ +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17 +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U diff --git a/keyboards/bastardkb/charybdis/4x6/v2/splinky/info.json b/keyboards/bastardkb/charybdis/4x6/v2/splinky/info.json new file mode 100644 index 0000000000..0004eb81c9 --- /dev/null +++ b/keyboards/bastardkb/charybdis/4x6/v2/splinky/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Charybdis (4x6) Splinky", + "usb": { + "device_version": "2.0.0", + }, +} diff --git a/keyboards/bastardkb/charybdis/4x6/v2/splinky/mcuconf.h b/keyboards/bastardkb/charybdis/4x6/v2/splinky/mcuconf.h new file mode 100644 index 0000000000..0fdd67c3a2 --- /dev/null +++ b/keyboards/bastardkb/charybdis/4x6/v2/splinky/mcuconf.h @@ -0,0 +1,23 @@ +/* + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include_next "mcuconf.h" + +#undef RP_SPI_USE_SPI0 +#define RP_SPI_USE_SPI0 TRUE diff --git a/keyboards/bastardkb/charybdis/4x6/v2/splinky/rules.mk b/keyboards/bastardkb/charybdis/4x6/v2/splinky/rules.mk new file mode 100644 index 0000000000..13c1b39961 --- /dev/null +++ b/keyboards/bastardkb/charybdis/4x6/v2/splinky/rules.mk @@ -0,0 +1,36 @@ +# MCU name +MCU = RP2040 + +# Bootloader selection +BOOTLOADER = rp2040 + +# RP2040-specific options +ALLOW_WARNINGS = yes +PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS. + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +AUDIO_SUPPORTED = no # Audio is not supported +RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default +RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default +RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality +RGB_MATRIX_DRIVER = WS2812 + +SPLIT_KEYBOARD = yes + +POINTING_DEVICE_ENABLE = yes # Enable trackball +POINTING_DEVICE_DRIVER = pmw3360 + +SERIAL_DRIVER = vendor +WS2812_DRIVER = vendor |