summaryrefslogtreecommitdiff
path: root/keyboards/atom47/rev2/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/atom47/rev2/readme.md')
-rw-r--r--keyboards/atom47/rev2/readme.md23
1 files changed, 23 insertions, 0 deletions
diff --git a/keyboards/atom47/rev2/readme.md b/keyboards/atom47/rev2/readme.md
new file mode 100644
index 0000000000..18ee85d54f
--- /dev/null
+++ b/keyboards/atom47/rev2/readme.md
@@ -0,0 +1,23 @@
+# Atom47 rev2
+
+This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.
+
+## Support
+Keyboard Maintainer: [Matthew Kerfoot(https://github.com/mkerfoot)
+Hardware Supported: Atom47 rev2
+Hardware Availability: None
+
+
+## Features
+- QMK Firmware
+- In-switch leds
+- Through-hole micro usb connector (less likely to break off!)
+- Easily reachable reset button under the spacebar
+- In-switch CapsLock indicator
+
+## Build
+To build the default keymap, simply run `make atom47/rev2:default`.
+
+For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.