17 files changed, 7 insertions, 236 deletions
diff --git a/keyboards/ai03/equinox/config.h b/keyboards/ai03/equinox/config.h
index ab7b14094f..2c3f9b4d15 100644
--- a/keyboards/ai03/equinox/config.h
+++ b/keyboards/ai03/equinox/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -64,8 +63,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -77,27 +74,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/equinox/keymaps/crd/keymap.c b/keyboards/ai03/equinox/keymaps/crd/keymap.c
index b945dc16d5..a3203cd312 100644
--- a/keyboards/ai03/equinox/keymaps/crd/keymap.c
+++ b/keyboards/ai03/equinox/keymaps/crd/keymap.c
@@ -14,12 +14,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include QMK_KEYBOARD_H
-/*
-    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
-    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
-    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
-    K300, K301, K302,     K304,       K306,       K308,   K309, K310, K311  \
-*/
 
 #define KC_CTES RCTL_T(KC_ESC)
 #define KC_BSM1 LT(1, KC_BSPC)
diff --git a/keyboards/ai03/jp60/config.h b/keyboards/ai03/jp60/config.h
index dd1b4bcb0e..38bbb08064 100644
--- a/keyboards/ai03/jp60/config.h
+++ b/keyboards/ai03/jp60/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -56,27 +55,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/lunar/config.h b/keyboards/ai03/lunar/config.h
index b3fcd13ee5..81df49461f 100644
--- a/keyboards/ai03/lunar/config.h
+++ b/keyboards/ai03/lunar/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -44,10 +43,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
 //   #define RGBLED_NUM 16
@@ -64,8 +59,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -77,27 +70,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/lunar_ii/config.h b/keyboards/ai03/lunar_ii/config.h
index 5942457d57..1b02059356 100644
--- a/keyboards/ai03/lunar_ii/config.h
+++ b/keyboards/ai03/lunar_ii/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* Mechanical lock switch support */
 #define LOCKING_SUPPORT_ENABLE
@@ -27,29 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SOLENOID_PIN B7
 #define SOLENOID_DEFAULT_DWELL 15
 
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h
index 9753143e89..be82b2fefe 100644
--- a/keyboards/ai03/orbit/config.h
+++ b/keyboards/ai03/orbit/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 10 // Double rows for split keyboards. Orbit has 5, so define 10
@@ -53,7 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SPLIT_HAND_PIN D5
 
 #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
 // #define RGB_DI_PIN E2
@@ -72,8 +70,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -85,27 +81,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/orbit_x/config.h b/keyboards/ai03/orbit_x/config.h
index 6966de9df5..a6b7f2b908 100644
--- a/keyboards/ai03/orbit_x/config.h
+++ b/keyboards/ai03/orbit_x/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 8 // Double the rows for split 
@@ -66,27 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/polaris/config.h b/keyboards/ai03/polaris/config.h
index 41f0f9b714..08aff4146b 100644
--- a/keyboards/ai03/polaris/config.h
+++ b/keyboards/ai03/polaris/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -75,8 +74,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/ai03/polaris/info.json b/keyboards/ai03/polaris/info.json
index c4bef0c4a0..f25c6f2dd2 100644
--- a/keyboards/ai03/polaris/info.json
+++ b/keyboards/ai03/polaris/info.json
@@ -8,6 +8,7 @@
         "pid": "0x0002",
         "device_version": "0.0.1"
     },
+    "community_layouts": ["60_ansi", "60_ansi_split_bs_rshift", "60_tsangan_hhkb"],
     "layouts": {
         "LAYOUT_all": {
             "layout": [
diff --git a/keyboards/ai03/polaris/rules.mk b/keyboards/ai03/polaris/rules.mk
index 235f02969b..63a57dcadb 100644
--- a/keyboards/ai03/polaris/rules.mk
+++ b/keyboards/ai03/polaris/rules.mk
@@ -16,5 +16,3 @@ NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_tsangan_hhkb
diff --git a/keyboards/ai03/quasar/config.h b/keyboards/ai03/quasar/config.h
index a73322a5de..076a879a4c 100644
--- a/keyboards/ai03/quasar/config.h
+++ b/keyboards/ai03/quasar/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 8
@@ -44,10 +43,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
 //   #define RGBLED_NUM 16
@@ -70,8 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -83,27 +76,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/quasar/keymaps/ai03/keymap.c b/keyboards/ai03/quasar/keymaps/ai03/keymap.c
index d0a12839ca..4df12732bd 100644
--- a/keyboards/ai03/quasar/keymaps/ai03/keymap.c
+++ b/keyboards/ai03/quasar/keymaps/ai03/keymap.c
@@ -15,16 +15,6 @@
  */
 #include QMK_KEYBOARD_H
 
-
-/*
- *  K702,       K503, K504, K604, K704,    K706, K708, K609, K509,    K506, K406, K411, K412,    K415, K315, K114, \
- *  K502, K402, K403, K404, K405, K505, K507, K407, K408, K409, K410, K510, K508,       K606,    K512, K514, K513, \
- *  K602, K302, K303, K304, K305, K605, K607, K307, K308, K309, K310, K610, K608,       K206,    K511, K414, K413, \
- *  K603, K202, K203, K204, K205, K705, K707, K207, K208, K209, K210, K710,             K106,                      \
- *  K601,       K102, K103, K104, K105, K005, K007, K107, K108, K109, K010,             K101,          K714,       \
- *  K500,       K715,                         K006,                         K015,       K100,    K014, K011, K012  \
- */
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT( /* Base */
     KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,     KC_PSCR, KC_SCRL, KC_PAUS, 
diff --git a/keyboards/ai03/soyuz/config.h b/keyboards/ai03/soyuz/config.h
index 324a815580..10ce68f9a1 100644
--- a/keyboards/ai03/soyuz/config.h
+++ b/keyboards/ai03/soyuz/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -44,10 +43,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
 //   #define RGBLED_NUM 16
@@ -64,8 +59,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -77,27 +70,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/soyuz/info.json b/keyboards/ai03/soyuz/info.json
index 98af3b3373..90e2254046 100644
--- a/keyboards/ai03/soyuz/info.json
+++ b/keyboards/ai03/soyuz/info.json
@@ -8,6 +8,7 @@
         "pid": "0x0018",
         "device_version": "0.0.1"
     },
+    "community_layouts": ["ortho_5x4", "numpad_5x4"],
     "layouts": {
         "LAYOUT_ortho_5x4": {
             "layout": [
diff --git a/keyboards/ai03/soyuz/keymaps/1U/keymap.c b/keyboards/ai03/soyuz/keymaps/1U/keymap.c
index 18a9747329..1d6f3dfa8c 100644
--- a/keyboards/ai03/soyuz/keymaps/1U/keymap.c
+++ b/keyboards/ai03/soyuz/keymaps/1U/keymap.c
@@ -22,11 +22,11 @@ enum custom_keycodes {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_ortho_5x4( /* Base */
-    KC_NUM,  KC_PSLS, KC_PAST, KC_BSPC, \
-	KC_P7,   KC_P8,   KC_P9,   KC_MINS, \
-	KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
-	KC_P1,   KC_P2,   KC_P3,   KC_EQL,  \
-	DBLZERO, KC_P0,   KC_PDOT, KC_PENT  \
+    KC_NUM,  KC_PSLS, KC_PAST, KC_BSPC,
+	KC_P7,   KC_P8,   KC_P9,   KC_MINS,
+	KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+	KC_P1,   KC_P2,   KC_P3,   KC_EQL,
+	DBLZERO, KC_P0,   KC_PDOT, KC_PENT
   )
 };
 
diff --git a/keyboards/ai03/soyuz/rules.mk b/keyboards/ai03/soyuz/rules.mk
index 1d7270bb01..70a092a64e 100644
--- a/keyboards/ai03/soyuz/rules.mk
+++ b/keyboards/ai03/soyuz/rules.mk
@@ -16,5 +16,3 @@ NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = ortho_5x4 numpad_5x4
diff --git a/keyboards/ai03/voyager60_alps/config.h b/keyboards/ai03/voyager60_alps/config.h
index 7d9302a8a5..01080211bb 100644
--- a/keyboards/ai03/voyager60_alps/config.h
+++ b/keyboards/ai03/voyager60_alps/config.h
@@ -14,7 +14,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 14
@@ -29,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
  */
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
-// define BACKLIGHT_PIN B7
-// define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 #define RGB_DI_PIN D2
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 14
@@ -49,8 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 // #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */