3 files changed, 16 insertions, 60 deletions
diff --git a/keyboards/abstract/ellipse/rev1/config.h b/keyboards/abstract/ellipse/rev1/config.h
index 5e61aaa346..f7932863e9 100644
--- a/keyboards/abstract/ellipse/rev1/config.h
+++ b/keyboards/abstract/ellipse/rev1/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 2
-#define MATRIX_COLS 3
 
 /*
  * Keyboard Matrix Assignments
@@ -39,10 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-#define BACKLIGHT_PIN C6
-//#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 15
-
 #define RGB_DI_PIN E6
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 3
@@ -53,45 +44,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -107,11 +64,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
-#define ENCODERS_PAD_A { B2, B3, D5 }
-#define ENCODERS_PAD_B { B1, B7, B4 }
-#define ENCODER_RESOLUTION 2
diff --git a/keyboards/abstract/ellipse/rev1/info.json b/keyboards/abstract/ellipse/rev1/info.json
index 0037719e12..230e286c5d 100644
--- a/keyboards/abstract/ellipse/rev1/info.json
+++ b/keyboards/abstract/ellipse/rev1/info.json
@@ -1,13 +1,26 @@
 {
-    "keyboard_name": "Ellipse", 
+    "keyboard_name": "Ellipse",
     "manufacturer": "AbstractKB",
-    "url": "https://abstractkb.tk/product/ellipse-rev1", 
-    "maintainer": "AbstractKB", 
+    "url": "https://abstractkb.tk/product/ellipse-rev1",
+    "maintainer": "AbstractKB",
     "usb": {
         "vid": "0xFEED",
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B2", "pin_b": "B1", "resolution": 2},
+            {"pin_a": "B3", "pin_b": "B7", "resolution": 2},
+            {"pin_a": "D5", "pin_b": "B4", "resolution": 2}
+        ]
+    },
+    "backlight": {
+        "pin": "C6",
+        "levels": 15
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}]
diff --git a/keyboards/abstract/ellipse/rev1/rules.mk b/keyboards/abstract/ellipse/rev1/rules.mk
index c3d7b41630..e0bcc61952 100644
--- a/keyboards/abstract/ellipse/rev1/rules.mk
+++ b/keyboards/abstract/ellipse/rev1/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #