3 files changed, 8 insertions, 66 deletions
diff --git a/keyboards/1upkeyboards/super16v2/config.h b/keyboards/1upkeyboards/super16v2/config.h
index a37053a20f..04f5fdd979 100644
--- a/keyboards/1upkeyboards/super16v2/config.h
+++ b/keyboards/1upkeyboards/super16v2/config.h
@@ -16,11 +16,6 @@
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 4
 
 #define MOUSEKEY_MOVE_DELTA 25
 
@@ -39,28 +34,9 @@
 #define MATRIX_ROW_PINS { D1, D2, D3, D4 }
 #define MATRIX_COL_PINS { D5, D6, C2, D0 }
 
-#define ENCODERS_PAD_A { B1, B3 }
-#define ENCODERS_PAD_B { B2, B4 }
-
-
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN B5
 #define RGB_MATRIX_LED_COUNT 20
 #ifdef RGB_DI_PIN
@@ -120,43 +96,11 @@
 //#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -172,7 +116,3 @@
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/1upkeyboards/super16v2/info.json b/keyboards/1upkeyboards/super16v2/info.json
index 891eaf316b..13e2c55fa5 100644
--- a/keyboards/1upkeyboards/super16v2/info.json
+++ b/keyboards/1upkeyboards/super16v2/info.json
@@ -8,6 +8,14 @@
       "pid": "0x5517",
       "device_version": "0.0.1"
     },
+    "encoder": {
+      "rotary": [
+        {"pin_a": "B1", "pin_b": "B2"},
+        {"pin_a": "B3", "pin_b": "B4"}
+      ]
+    },
+    "processor": "atmega32u2",
+    "bootloader": "atmel-dfu",
     "layouts": {
       "LAYOUT_ortho_4x4": {
         "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]
diff --git a/keyboards/1upkeyboards/super16v2/rules.mk b/keyboards/1upkeyboards/super16v2/rules.mk
index 3e20247dff..2653d876b5 100644
--- a/keyboards/1upkeyboards/super16v2/rules.mk
+++ b/keyboards/1upkeyboards/super16v2/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u2
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #