diff options
Diffstat (limited to 'keyboard/onekey/config.h')
| -rw-r--r-- | keyboard/onekey/config.h | 156 |
1 files changed, 0 insertions, 156 deletions
diff --git a/keyboard/onekey/config.h b/keyboard/onekey/config.h deleted file mode 100644 index bf1d2b1ed3..0000000000 --- a/keyboard/onekey/config.h +++ /dev/null @@ -1,156 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1111 -#define DEVICE_VER 0x0001 -#define MANUFACTURER geekhack -#define PRODUCT Onekey -#define DESCRIPTION t.m.k. keyboard firmware for Onekey - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - - - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - - -/* PS/2 mouse */ -#ifdef PS2_USE_BUSYWAIT -# define PS2_CLOCK_PORT PORTD -# define PS2_CLOCK_PIN PIND -# define PS2_CLOCK_DDR DDRD -# define PS2_CLOCK_BIT 1 -# define PS2_DATA_PORT PORTD -# define PS2_DATA_PIN PIND -# define PS2_DATA_DDR DDRD -# define PS2_DATA_BIT 2 -#endif - - -/* PS/2 mouse interrupt version */ -#ifdef PS2_USE_INT -/* uses INT1 for clock line(ATMega32U4) */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 1 -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 2 - -#define PS2_INT_INIT() do { \ - EICRA |= ((1<<ISC11) | \ - (0<<ISC10)); \ -} while (0) -#define PS2_INT_ON() do { \ - EIMSK |= (1<<INT1); \ -} while (0) -#define PS2_INT_OFF() do { \ - EIMSK &= ~(1<<INT1); \ -} while (0) -#define PS2_INT_VECT INT1_vect -#endif - - -/* PS/2 mouse USART version */ -#ifdef PS2_USE_USART -#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) -/* XCK for clock line and RXD for data line */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 5 -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 2 - -/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ -/* set DDR of CLOCK as input to be slave */ -#define PS2_USART_INIT() do { \ - PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ - PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ - UCSR1C = ((1 << UMSEL10) | \ - (3 << UPM10) | \ - (0 << USBS1) | \ - (3 << UCSZ10) | \ - (0 << UCPOL1)); \ - UCSR1A = 0; \ - UBRR1H = 0; \ - UBRR1L = 0; \ -} while (0) -#define PS2_USART_RX_INT_ON() do { \ - UCSR1B = ((1 << RXCIE1) | \ - (1 << RXEN1)); \ -} while (0) -#define PS2_USART_RX_POLL_ON() do { \ - UCSR1B = (1 << RXEN1); \ -} while (0) -#define PS2_USART_OFF() do { \ - UCSR1C = 0; \ - UCSR1B &= ~((1 << RXEN1) | \ - (1 << TXEN1)); \ -} while (0) -#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) -#define PS2_USART_RX_DATA UDR1 -#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) -#define PS2_USART_RX_VECT USART1_RX_vect -#endif -#endif - -#endif |