diff options
Diffstat (limited to 'keyboard/atomic')
| -rw-r--r-- | keyboard/atomic/Makefile | 67 | ||||
| -rw-r--r-- | keyboard/atomic/keymaps/pvc/config.h | 157 | ||||
| -rw-r--r-- | keyboard/atomic/keymaps/pvc/keymap.c (renamed from keyboard/atomic/keymaps/pvc/pvc_atomic.c) | 207 | ||||
| -rw-r--r-- | keyboard/atomic/keymaps/pvc/makefile.mk | 6 |
4 files changed, 294 insertions, 143 deletions
diff --git a/keyboard/atomic/Makefile b/keyboard/atomic/Makefile index 364efa3fa5..1203cf6a39 100644 --- a/keyboard/atomic/Makefile +++ b/keyboard/atomic/Makefile @@ -38,31 +38,9 @@ # To rebuild project do "make clean" then "make all". #---------------------------------------------------------------------------- -# Build Options -# change to "no" to disable the options, or define them in the makefile.mk in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: - # https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - # Target file name (without extension). TARGET = atomic - # Directory common source filess exist TOP_DIR = ../.. TMK_DIR = ../../tmk_core @@ -73,6 +51,8 @@ TARGET_DIR = . # # project specific files SRC = atomic.c +CONFIG_H = config.h + ifdef keymap KEYMAP = $(keymap) endif @@ -88,7 +68,7 @@ ifneq ("$(wildcard keymaps/$(KEYMAP)/makefile.mk)","") endif else $(error Keymap file does not exist) -endif +endif endif else @@ -107,8 +87,6 @@ endif SRC := $(KEYMAP_FILE) $(SRC) -CONFIG_H = config.h - # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -126,7 +104,6 @@ MCU = atmega32u4 # software delays. F_CPU = 16000000 - # # LUFA specific # @@ -158,11 +135,45 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # USBaspLoader 2048 OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Build Options +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifdef KEYMAP + +ifeq ("$(wildcard keymaps/$(KEYMAP).c)","") +ifneq ("$(wildcard keymaps/$(KEYMAP)/makefile.mk)","") + include keymaps/$(KEYMAP)/makefile.mk +endif +endif + +else + +ifneq ("$(wildcard keymaps/default/makefile.mk)","") + include keymaps/default/makefile.mk +endif -ifeq ($(BACKLIGHT_ENABLE), yes) - SRC += backlight.c endif +ifeq ($(strip $(BACKLIGHT_ENABLE)), yes) + SRC := backlight.c $(SRC) +endif # Optimize size but this may cause error "relocation truncated to fit" #EXTRALDFLAGS = -Wl,--relax diff --git a/keyboard/atomic/keymaps/pvc/config.h b/keyboard/atomic/keymaps/pvc/config.h new file mode 100644 index 0000000000..8449fa06de --- /dev/null +++ b/keyboard/atomic/keymaps/pvc/config.h @@ -0,0 +1,157 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Atomic Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, D3, D2, D1 } +#define ROWS (int []){ D0, D5, B5, B6, B3 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/atomic/keymaps/pvc/pvc_atomic.c b/keyboard/atomic/keymaps/pvc/keymap.c index 3ddd3e3294..627f57ff70 100644 --- a/keyboard/atomic/keymaps/pvc/pvc_atomic.c +++ b/keyboard/atomic/keymaps/pvc/keymap.c @@ -1,12 +1,19 @@ #include "atomic.h" #include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif #define _QW 0 #define _LW 1 #define _RS 2 #define _FN 3 -#define _F1 4 -#define _F2 5 + +#define M_QW 0 +#define M_LW 1 +#define M_RS 2 +#define M_FN 3 + #define _______ KC_TRNS #define ___T___ KC_TRNS @@ -32,7 +39,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, { KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, XXXXXXX, KC_PGUP }, { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, XXXXXXX, KC_UP, KC_PGDN }, - { KC_LCTL, KC_LGUI, M(_FN), KC_LALT, M(_RS), KC_SPC, XXXXXXX, M(_LW), KC_RALT, KC_HOME, KC_END, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, + { KC_LCTL, KC_LGUI, M(M_FN), KC_LALT, M(M_RS), KC_SPC, XXXXXXX, M(M_LW), KC_RALT, KC_HOME, KC_END, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, }, [_LW] = { /* LOWERED */ { KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, @@ -55,29 +62,50 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D }, { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R }, }, - [_F1] = { /* FUNCTION */ - { KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, - { KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_PAUS, KC_PSCR }, - { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D }, - { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R }, - }, - [_F2] = { /* FUNCTION */ - { KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, - { KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_PAUS, KC_PSCR }, - { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D }, - { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R }, - }, }; #define IS_LAYER_ON(layer) ((layer_state) & (1<<(layer))) #define IS_LAYER_OFF(layer) ((!layer_state) & (1<<(layer))) + +#ifdef AUDIO_ENABLE +float tone_lw[][2] = { + {440.0*pow(2.0,(59)/12.0), 8}, + {440.0*pow(2.0,(60)/12.0), 8}, + {0, 4}, + {440.0*pow(2.0,(67)/12.0), 16} +}; + +float tone_rs[][2] = { + {440.0*pow(2.0,(59)/12.0), 8}, + {440.0*pow(2.0,(60)/12.0), 8}, + {0, 4}, + {440.0*pow(2.0,(67)/12.0), 16}, + {0, 4}, + {440.0*pow(2.0,(71)/12.0), 16} +}; + +float tone_fn[][2] = { + {440.0*pow(2.0,(59)/12.0), 8}, + {440.0*pow(2.0,(60)/12.0), 8}, + {0, 4}, + {440.0*pow(2.0,(67)/12.0), 16}, + {0, 4}, + {440.0*pow(2.0,(69)/12.0), 16}, + {0, 4}, + {440.0*pow(2.0,(67)/12.0), 16} +}; +#endif + + void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3) { if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + #ifdef AUDIO_ENABLE + println("PlayNotes FN"); + play_notes(&tone_fn, 8, false); + #endif layer_on(layer3); } else @@ -114,37 +142,6 @@ void update_quad_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3, uint8_t l } } -/* ignore me -void change_quad_layer(uint8_t focus_layer, bool desired_focus_layer_state, uint8_t pair_layer, uint8_t layer3, uint8_t layer4) -{ - - // If desired focus layer state == 1 and current focus layer state == 1 - if ((desired_focus_layer_state) && IS_LAYER_ON(layer1)) - { - // Do Nothing - } - // If desired focus layer state == 0 and current focus layer state == 1 - else if ((desired_focus_layer_state) && IS_LAYER_ON(layer1)) - { - // If - layer_off(layer3); - layer_off(layer4); - } - } - else - { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) - { - layer_on(layer4); - } - else - { - layer_off(layer3); - layer_off(layer4); - } - } -} -*/ const uint16_t PROGMEM fn_actions[] = { }; @@ -152,70 +149,54 @@ const uint16_t PROGMEM fn_actions[] = { const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - // MACRODOWN only works in this function - switch(id) - { - case _FN: - if (record->event.pressed) { - print("FN_DN\n"); - print_val_bin32(layer_state); - layer_on(_FN); - print_val_bin32(layer_state); - } else { - print("FN_UP\n"); - print_val_bin32(layer_state); - layer_off(_FN); - print_val_bin32(layer_state); - } - break; - - case _RS: - if (record->event.pressed) { - print("RS_DN\n"); - print_val_bin32(layer_state); - layer_on(_RS); - //tri_layer++; - print_val_bin32(layer_state); - //update_tri_layer(_RS, _LW, _FN); - update_quad_layer(_RS, _LW, _F1, _F2, 0); - print_val_bin32(layer_state); - } else { - print("RS_UP\n"); - print_val_bin32(layer_state); - layer_off(_RS); - //tri_layer--; - print_val_bin32(layer_state); - //update_tri_layer(_RS, _LW, _FN); - update_quad_layer(_RS, _LW, _F1, _F2, 0); - print_val_bin32(layer_state); - } - break; - - case _LW: - if (record->event.pressed) { - print("LW_DN\n"); - print_val_bin32(layer_state); - layer_on(_LW); - //tri_layer++; - print_val_bin32(layer_state); - //update_tri_layer(_RS, _LW, _FN); - update_quad_layer(_RS, _LW, _F1, _F2, 1); - print_val_bin32(layer_state); - } else { - print("LW_UP\n"); - print_val_bin32(layer_state); - layer_off(_LW); - //tri_layer--; - print_val_bin32(layer_state); - //update_tri_layer(_RS, _LW, _FN); - update_quad_layer(_RS, _LW, _F1, _F2, 1); - print_val_bin32(layer_state); - } - break; - + // MACRODOWN only works in this function + switch(id) { + case M_LW: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + println("PlayNotes LW"); + play_notes(&tone_lw, 4, false); + #endif + layer_on(_LW); + update_tri_layer(_LW, _RS, _FN); + } else { + layer_off(_LW); + update_tri_layer(_LW, _RS, _FN); + } + break; + case M_RS: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + println("PlayNotes RS"); + play_notes(&tone_rs, 6, false); + #endif + layer_on(_RS); + update_tri_layer(_LW, _RS, _FN); + } else { + layer_off(_RS); + update_tri_layer(_LW, _RS, _FN); + } + break; default: - break; - } - return MACRO_NONE; + break; + } + return MACRO_NONE; +}; + +#ifdef AUDIO_ENABLE +float start_up[][2] = { + {440.0*pow(2.0,(67)/12.0), 12}, + {440.0*pow(2.0,(64)/12.0), 8}, + {440.0*pow(2.0,(55)/12.0), 8}, + {440.0*pow(2.0,(60)/12.0), 8}, + {440.0*pow(2.0,(64)/12.0), 20} }; +#endif + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + init_notes(); + play_notes(&start_up, 5, false); + println("Matrix Init"); + #endif +} diff --git a/keyboard/atomic/keymaps/pvc/makefile.mk b/keyboard/atomic/keymaps/pvc/makefile.mk index ff0a9c338b..c41102f5d4 100644 --- a/keyboard/atomic/keymaps/pvc/makefile.mk +++ b/keyboard/atomic/keymaps/pvc/makefile.mk @@ -1,16 +1,18 @@ BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: # https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file |