diff options
Diffstat (limited to 'keyboard/atomic/atomic.c')
| -rw-r--r-- | keyboard/atomic/atomic.c | 265 |
1 files changed, 235 insertions, 30 deletions
diff --git a/keyboard/atomic/atomic.c b/keyboard/atomic/atomic.c index 3996497161..fa218a48f3 100644 --- a/keyboard/atomic/atomic.c +++ b/keyboard/atomic/atomic.c @@ -2,27 +2,28 @@ __attribute__ ((weak)) void matrix_init_user(void) { - // leave this function blank - it can be defined in a keymap file + // leave this function blank - it can be defined in a keymap file }; __attribute__ ((weak)) void matrix_scan_user(void) { - // leave this function blank - it can be defined in a keymap file + // leave this function blank - it can be defined in a keymap file } __attribute__ ((weak)) -void process_action_user(keyrecord_t *record) { - // leave this function blank - it can be defined in a keymap file +bool process_action_user(keyrecord_t *record) { + // leave this function blank - it can be defined in a keymap file + return true; } __attribute__ ((weak)) void led_set_user(uint8_t usb_led) { - // leave this function blank - it can be defined in a keymap file + // leave this function blank - it can be defined in a keymap file } void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up + // put your keyboard start-up code here + // runs once when the firmware starts up MCUCR |= (1<<JTD); MCUCR |= (1<<JTD); @@ -35,31 +36,39 @@ void matrix_init_kb(void) { DDRE |= (1<<6); PORTE |= (1<<6); - matrix_init_user(); + matrix_init_user(); } void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) + // put your looping keyboard code here + // runs every cycle (a lot) - matrix_scan_user(); + matrix_scan_user(); } -void process_action_kb(keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware +bool process_action_kb(keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware - process_action_user(record); + return process_action_user(record); } void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); + led_set_user(usb_led); } #ifdef BACKLIGHT_ENABLE #define CHANNEL OCR1C +#define BREATHING_NO_HALT 0 +#define BREATHING_HALT_OFF 1 +#define BREATHING_HALT_ON 2 + +static uint8_t breath_intensity; +static uint8_t breath_speed; +static uint16_t breathing_index; +static uint8_t breathing_halt; void backlight_init_ports() { @@ -67,54 +76,250 @@ void backlight_init_ports() // Setup PB7 as output and output low. DDRB |= (1<<7); PORTB &= ~(1<<7); - - // Use full 16-bit resolution. + + // Use full 16-bit resolution. ICR1 = 0xFFFF; // I could write a wall of text here to explain... but TL;DW // Go read the ATmega32u4 datasheet. // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on - + // Pin PB7 = OCR1C (Timer 1, Channel C) // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 // (i.e. start high, go low when counter matches.) // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 - + TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; backlight_init(); + breathing_defaults(); } void backlight_set(uint8_t level) { + // Prevent backlight blink on lowest level + PORTB &= ~(_BV(PORTB7)); + if ( level == 0 ) { // Turn off PWM control on PB7, revert to output low. TCCR1A &= ~(_BV(COM1C1)); + + // Set the brightness to 0 CHANNEL = 0x0; - // Prevent backlight blink on lowest level - PORTB &= ~(_BV(PORTB7)); } - else if ( level == BACKLIGHT_LEVELS ) + else if ( level >= BACKLIGHT_LEVELS ) { - // Prevent backlight blink on lowest level - PORTB &= ~(_BV(PORTB7)); // Turn on PWM control of PB7 TCCR1A |= _BV(COM1C1); - // Set the brightness + + // Set the brightness to max CHANNEL = 0xFFFF; } - else + else { - // Prevent backlight blink on lowest level - PORTB &= ~(_BV(PORTB7)); // Turn on PWM control of PB7 TCCR1A |= _BV(COM1C1); + // Set the brightness CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2)); } + breathing_intensity_default(); +} + + +void breathing_enable(void) +{ + if (get_backlight_level() == 0) + { + breathing_index = 0; + } + else + { + // Set breathing_index to be at the midpoint (brightest point) + breathing_index = 0x20 << breath_speed; + } + + breathing_halt = BREATHING_NO_HALT; + + // Enable breathing interrupt + TIMSK1 |= _BV(OCIE1A); +} + +void breathing_pulse(void) +{ + if (get_backlight_level() == 0) + { + breathing_index = 0; + } + else + { + // Set breathing_index to be at the midpoint + 1 (brightest point) + breathing_index = 0x21 << breath_speed; + } + + breathing_halt = BREATHING_HALT_ON; + + // Enable breathing interrupt + TIMSK1 |= _BV(OCIE1A); +} + +void breathing_disable(void) +{ + // Disable breathing interrupt + TIMSK1 &= ~_BV(OCIE1A); + backlight_set(get_backlight_level()); +} + +void breathing_self_disable(void) +{ + if (get_backlight_level() == 0) + { + breathing_halt = BREATHING_HALT_OFF; + } + else + { + breathing_halt = BREATHING_HALT_ON; + } + + //backlight_set(get_backlight_level()); +} + +void breathing_toggle(void) +{ + if (!is_breathing()) + { + if (get_backlight_level() == 0) + { + breathing_index = 0; + } + else + { + // Set breathing_index to be at the midpoint + 1 (brightest point) + breathing_index = 0x21 << breath_speed; + } + + breathing_halt = BREATHING_NO_HALT; + } + + // Toggle breathing interrupt + TIMSK1 ^= _BV(OCIE1A); + + // Restore backlight level + if (!is_breathing()) + { + backlight_set(get_backlight_level()); + } +} + +bool is_breathing(void) +{ + return (TIMSK1 && _BV(OCIE1A)); +} + +void breathing_intensity_default(void) +{ + //breath_intensity = (uint8_t)((uint16_t)100 * (uint16_t)get_backlight_level() / (uint16_t)BACKLIGHT_LEVELS); + breath_intensity = ((BACKLIGHT_LEVELS - get_backlight_level()) * ((BACKLIGHT_LEVELS + 1) / 2)); +} + +void breathing_intensity_set(uint8_t value) +{ + breath_intensity = value; +} + +void breathing_speed_default(void) +{ + breath_speed = 4; +} + +void breathing_speed_set(uint8_t value) +{ + bool is_breathing_now = is_breathing(); + uint8_t old_breath_speed = breath_speed; + + if (is_breathing_now) + { + // Disable breathing interrupt + TIMSK1 &= ~_BV(OCIE1A); + } + + breath_speed = value; + + if (is_breathing_now) + { + // Adjust index to account for new speed + breathing_index = (( (uint8_t)( (breathing_index) >> old_breath_speed ) ) & 0x3F) << breath_speed; + + // Enable breathing interrupt + TIMSK1 |= _BV(OCIE1A); + } + +} + +void breathing_speed_inc(uint8_t value) +{ + if ((uint16_t)(breath_speed - value) > 10 ) + { + breathing_speed_set(0); + } + else + { + breathing_speed_set(breath_speed - value); + } +} + +void breathing_speed_dec(uint8_t value) +{ + if ((uint16_t)(breath_speed + value) > 10 ) + { + breathing_speed_set(10); + } + else + { + breathing_speed_set(breath_speed + value); + } +} + +void breathing_defaults(void) +{ + breathing_intensity_default(); + breathing_speed_default(); + breathing_halt = BREATHING_NO_HALT; +} + +/* Breathing Sleep LED brighness(PWM On period) table + * (64[steps] * 4[duration]) / 64[PWM periods/s] = 4 second breath cycle + * + * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63 + * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i } + */ +static const uint8_t breathing_table[64] PROGMEM = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 4, 6, 10, + 15, 23, 32, 44, 58, 74, 93, 113, 135, 157, 179, 199, 218, 233, 245, 252, +255, 252, 245, 233, 218, 199, 179, 157, 135, 113, 93, 74, 58, 44, 32, 23, + 15, 10, 6, 4, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, +}; + +ISR(TIMER1_COMPA_vect) +{ + // CHANNEL = (pgm_read_byte(&breathing_table[ ( (uint8_t)( (breathing_index++) >> breath_speed ) ) & 0x3F ] )) * breath_intensity; + + + uint8_t local_index = ( (uint8_t)( (breathing_index++) >> breath_speed ) ) & 0x3F; + + if (((breathing_halt == BREATHING_HALT_ON) && (local_index == 0x20)) || ((breathing_halt == BREATHING_HALT_OFF) && (local_index == 0x3F))) + { + // Disable breathing interrupt + TIMSK1 &= ~_BV(OCIE1A); + } + + CHANNEL = (uint16_t)(((uint16_t)pgm_read_byte(&breathing_table[local_index]) * 257)) >> breath_intensity; + } + + #endif
\ No newline at end of file |