summaryrefslogtreecommitdiff
path: root/keyboard/IIgs
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard/IIgs')
-rw-r--r--keyboard/IIgs/Makefile95
-rw-r--r--keyboard/IIgs/README45
-rw-r--r--keyboard/IIgs/config.h63
-rw-r--r--keyboard/IIgs/doc/PIN_BYPASS.jpgbin329437 -> 0 bytes
-rw-r--r--keyboard/IIgs/doc/Teensy++_Mod.jpgbin74137 -> 0 bytes
-rwxr-xr-xkeyboard/IIgs/hid_listen.macbin13524 -> 0 bytes
-rw-r--r--keyboard/IIgs/keymap.c142
-rw-r--r--keyboard/IIgs/led.c24
-rw-r--r--keyboard/IIgs/matrix.c363
9 files changed, 0 insertions, 732 deletions
diff --git a/keyboard/IIgs/Makefile b/keyboard/IIgs/Makefile
deleted file mode 100644
index 3bf380e64b..0000000000
--- a/keyboard/IIgs/Makefile
+++ /dev/null
@@ -1,95 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = IIgs_Standard
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = keymap.c \
- matrix.c \
- led.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-#MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-MOUSEKEY_ENABLE = no # Mouse keys
-#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes # Audio control and System control
-#NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol/pjrc.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/keyboard/IIgs/README b/keyboard/IIgs/README
deleted file mode 100644
index 820d771102..0000000000
--- a/keyboard/IIgs/README
+++ /dev/null
@@ -1,45 +0,0 @@
-Replaceable USB Controller for Apple IIgs/Standard(M0116)
-JeffreySung(nattyman@gmail.com)
-
-===============================
-
-Feature
--------
-- Replaceable keyboard controller for Apple IIgs(A9M0330)/Standard(M0116)
-- Teensy++ 2.0 required
-- Some signal bypass required
-- ADB keyboard doesn't use matrix for modifier keys. With virtual row for modifier keys,
- these keys are merged into key matrix using virtual row.
-
-History
-=======
-- 2012.09.17 First Release
-- 2012.09.17 CapsLock support
-- 2012.09.19 Power button added
-Build
-=====
-0. Just Type "Make" and return.
-
-Hardware
-========
-PJRC Teensy
------------
-0. The following ports should not be connected to board.
- From top view of Teensy++, from GND and counter clock wise.
- -7,26(in keyboard PCB, these pins are VDD,GND)
- -30,31(in Teensy++, these pins are Ref,GND respectively)
- -5,6(D2,D3 for bluetooth in future)
-1. Bypass #31 pin(from board) to E4(Teensy)
-2. Bypass #30 pin(from board) to F2(Teensy)
-3. Bypass #6 pin(from board) to A0(Teensy)
-4. Refer to documentation directory
-
-To Do
-=====
-0. When DEBOUNCE defined, there is a errors.
-1. Layer Change by toggling Clear Key
-2. Eject Key add. (following files should be modified.)
- common/keycode.h
- common/keyboard.c
-3. Use bluetooth
-EOF
diff --git a/keyboard/IIgs/config.h b/keyboard/IIgs/config.h
deleted file mode 100644
index bc8bf75f94..0000000000
--- a/keyboard/IIgs/config.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-/* USB Device descriptor parameter */
-/* for Apple
-#define VENDOR_ID 0x05AC
-#define PRODUCT_ID 0xBEE0
-*/
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0xBEE0
-#define DEVICE_VER 0x0202
-#define MANUFACTURER t.m.k.
-#define PRODUCT Apple Desktop Bus Keyboard
-
-
-/* message strings */
-#define DESCRIPTION Apple M0116/A9M0660 keyboard firmware
-
-
-/* matrix size */
-#define MATRIX_ROWS 11 // last row is virtual for modifier
-#define MATRIX_COLS 8
-/* define if matrix has ghost */
-#define MATRIX_HAS_GHOST
-/* Set 0 if need no debouncing */
-#define DEBOUNCE 5
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LGUI)) || \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-/* layer switching */
-#define LAYER_SWITCH_DELAY 100
-#define LAYER_SEND_FN_TERM 300
-
-
-/* legacy keymap support */
-#define USE_LEGACY_KEYMAP
-
-
-#endif
diff --git a/keyboard/IIgs/doc/PIN_BYPASS.jpg b/keyboard/IIgs/doc/PIN_BYPASS.jpg
deleted file mode 100644
index 2998f0c3f8..0000000000
--- a/keyboard/IIgs/doc/PIN_BYPASS.jpg
+++ /dev/null
Binary files differ
diff --git a/keyboard/IIgs/doc/Teensy++_Mod.jpg b/keyboard/IIgs/doc/Teensy++_Mod.jpg
deleted file mode 100644
index 146c1ab93c..0000000000
--- a/keyboard/IIgs/doc/Teensy++_Mod.jpg
+++ /dev/null
Binary files differ
diff --git a/keyboard/IIgs/hid_listen.mac b/keyboard/IIgs/hid_listen.mac
deleted file mode 100755
index 8758fdf886..0000000000
--- a/keyboard/IIgs/hid_listen.mac
+++ /dev/null
Binary files differ
diff --git a/keyboard/IIgs/keymap.c b/keyboard/IIgs/keymap.c
deleted file mode 100644
index cd33e223ac..0000000000
--- a/keyboard/IIgs/keymap.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
-Copyright 2012 Jeffrey Sung <nattyman@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * Keymap for Apple IIgs/Standard Keyboard
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "keymap.h"
-
-
-// Convert physical keyboard layout to matrix array.
-// This is a macro to define keymap easily in keyboard layout form.
-#define KEYMAP( R10C5, \
- R3C7, R3C6, R3C5, R3C4, R3C3, R3C2, R3C1, R8C1, R8C0, R3C0, R0C0, R0C1, R0C2, R0C3, R4C4, R4C5, R4C6, R4C7, \
- R9C7, R9C6, R9C5, R9C4, R9C3, R9C2, R9C1, R9C0, R1C0, R1C1, R1C2, R1C3, R1C4, R2C4, R2C5, R2C6, R2C3, \
- R10C0,R7C7, R7C6, R7C5, R7C4, R7C3, R7C2, R7C1, R7C0, R0C4, R1C6, R1C7, R1C5, R2C0, R2C1, R2C2, R2C7, \
- R10C1,R6C7, R6C6, R6C5, R6C4, R6C3, R6C2, R6C1, R6C0, R0C5, R0C6, R4C0, R4C1, R4C2, \
- R10C4,R10C2,R10C3,R5C4, R5C7, R5C5, R5C6, R5C0, R5C2, R0C7, R5C1, R5C3, R4C3 \
-) { \
- { R0C0, R0C1, R0C2, R0C3, R0C4, R0C5, R0C6, R0C7 }, \
- { R1C0, R1C1, R1C2, R1C3, R1C4, R1C5, R1C6, R1C7 }, \
- { R2C0, R2C1, R2C2, R2C3, R2C4, R2C5, R2C6, R2C7 }, \
- { R3C0, R3C1, R3C2, R3C3, R3C4, R3C5, R3C6, R3C7 }, \
- { R4C0, R4C1, R4C2, R4C3, R4C4, R4C5, R4C6, R4C7 }, \
- { R5C0, R5C1, R5C2, R5C3, R5C4, R5C5, R5C6, R5C7 }, \
- { R6C0, R6C1, R6C2, R6C3, R6C4, R6C5, R6C6, R6C7 }, \
- { R7C0, R7C1, R7C2, R7C3, R7C4, R7C5, R7C6, R7C7 }, \
- { R8C0, R8C1, KC_NO, KC_NO, KC_NO,KC_NO, KC_NO, KC_NO }, \
- { R9C0, R9C1, R9C2, R9C3, R9C4, R9C5, R9C6, R9C7 }, \
- { R10C0,R10C1, R10C2, R10C3, R10C4,R10C5, KC_NO, KC_NO} \
-}
-
-#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
-
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
- 0, // Fn0
- 1, // Fn1
- 2, // Fn2
- 3, // Fn3
- 4, // Fn4
- 0, // Fn5
- 3, // Fn6
- 3 // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
- KC_NO, // Fn0
- KC_NO, // Fn1
- KC_SLSH, // Fn2
- KC_SCLN, // Fn3
- KC_SPC, // Fn4
- KC_NO, // Fn5
- KC_NO, // Fn6
- KC_NO // Fn7
-};
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Layer 0: Default Layer
- * ,-----------------------------------------------------------. ,---------------,
- * | POWER | | |
- * |-----------------------------------------------------------| |---------------|
- * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |FN0| = | / | * |
- * |-----------------------------------------------------------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7 | 8 | 9 | + |
- * |-----------------------------------------------------' | |---------------|
- * |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Return | | 4 | 5 | 6 | - |
- * |-----------------------------------------------------------| |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| .| / |Shift | | 1 | 2 | 3 | E |
- * |-----------------------------------------------------------| |-----------| N |
- * |CAPS|Alt |Gui |` |SPC |BSLS |LFT|RGT|DN|UP| | 0 | . | T |
- * `-----------------------------------------------------------' |---------------'
- */
- KEYMAP( KC_PWR,
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_FN1, KC_PEQL, KC_PSLS, KC_PAST, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC, KC_P7, KC_P8, KC_P9, KC_PPLS, \
- KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_ENT, KC_P4, KC_P5, KC_P6, KC_PMNS, \
- KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_P1, KC_P2, KC_P3, \
- KC_CAPS,KC_LALT,KC_LGUI,KC_GRV, KC_SPC, KC_BSLS,KC_LEFT,KC_RGHT,KC_DOWN,KC_UP, KC_P0, KC_PDOT, KC_PENT),
-
-
- /* Layer 1: Tenkey use Layer
- * ,-----------------------------------------------------------. ,---------------,
- * | POWER | | |
- * |-----------------------------------------------------------| |---------------|
- * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |NLK| = | / | * |
- * |-----------------------------------------------------------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | |INS| 8 |PGU|V+ |
- * |-----------------------------------------------------' | |---------------|
- * |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Return | |DEL|UP |PGD|V- |
- * |-----------------------------------------------------------| |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| .| / |Shift | |LFT|DN |RGT| E |
- * |-----------------------------------------------------------| |-----------| N |
- * |CAPS|Alt |Gui |` |SPC |BSLS |LFT|RGT|DN|UP| | 0 | . | T |
- * `-----------------------------------------------------------' `---------------'
- */
- KEYMAP( KC_PWR, \
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_FN1, KC_PEQL, KC_PSLS, KC_MUTE, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC, KC_INS, KC_P8, KC_PGUP, KC_VOLU, \
- KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_ENT, KC_DEL, KC_UP, KC_PGDN, KC_VOLD, \
- KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_LEFT, KC_DOWN, KC_RIGHT, \
- KC_CAPS,KC_LALT,KC_LGUI,KC_GRV, KC_SPC, KC_BSLS,KC_LEFT,KC_RGHT,KC_DOWN,KC_UP, KC_P0, KC_PDOT, KC_PENT),
-};
-
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
- return KEYCODE(layer, row, col);
-}
-
-uint8_t keymap_fn_layer(uint8_t index)
-{
- return pgm_read_byte(&fn_layer[index]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t index)
-{
- return pgm_read_byte(&fn_keycode[index]);
-}
diff --git a/keyboard/IIgs/led.c b/keyboard/IIgs/led.c
deleted file mode 100644
index f76545f0ba..0000000000
--- a/keyboard/IIgs/led.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
-}
diff --git a/keyboard/IIgs/matrix.c b/keyboard/IIgs/matrix.c
deleted file mode 100644
index 6ca55b7ea2..0000000000
--- a/keyboard/IIgs/matrix.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "led.h"
-
-
-#if (MATRIX_COLS > 16)
-# error "MATRIX_COLS must not exceed 16"
-#endif
-#if (MATRIX_ROWS > 255)
-# error "MATRIX_ROWS must not exceed 255"
-#endif
-
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 0
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-// matrix state buffer(1:on, 0:off)
-#if (MATRIX_COLS <= 8)
-static uint8_t *matrix;
-static uint8_t *matrix_prev;
-static uint8_t _matrix0[MATRIX_ROWS];
-static uint8_t _matrix1[MATRIX_ROWS];
-#else
-static uint16_t *matrix;
-static uint16_t *matrix_prev;
-static uint16_t _matrix0[MATRIX_ROWS];
-static uint16_t _matrix1[MATRIX_ROWS];
-#endif
-
-#ifdef MATRIX_HAS_GHOST
-static bool matrix_has_ghost_in_row(uint8_t row);
-#endif
-static uint8_t read_col(uint8_t row);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- // initialize row and col
- unselect_rows();
- // Input with pull-up(DDR:0, PORT:1)
- // Column C1 ~ C7 (PortC0-6)
- // Column C0(Port E1)
- DDRC &= ~0b01111111;
- PORTC |= 0b01111111;
- DDRE &= ~0b00000010;
- PORTE |= 0b00000010;
- //DDRB &= ~0b00000100;
- //PORTB |= 0b00000100;
- // modifier B3/4,F4/5,E4 always input
- // A0
- //DDRA |= 0b00000001;
- //PORTA &= 0b00000001;
- //DDRB |= 0b00011000;
- //PORTB &= 0b00011000;
- //DDRF |= ~0b00110000;
- //PORTF &= 0b00110000;
- //DDRB &= ~0b00011000;
- //PORTB |= 0b00011000;
- //DDRF &= ~0b00110000;
- //PORTF |= 0b00110000;
- //DDRE &= ~0b00010000;
- //PORTE |= 0b00010000;
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
- for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
- matrix = _matrix0;
- matrix_prev = _matrix1;
-}
-
-uint8_t matrix_scan(void)
-{
- if (!debouncing) {
- uint8_t *tmp = matrix_prev;
- matrix_prev = matrix;
- matrix = tmp;
- }
-
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- unselect_rows();
- select_row(i);
- _delay_us(30); // without this wait read unstable value.
- if ( i == ( MATRIX_ROWS - 1 ) ) { // CHECK CAPS LOCK
- if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { // CAPS LOCK is ON on HOST
- if ( ~read_col(i) & (1<< 4) ) { // CAPS LOCK is still DOWN ( 0bXXX1_XXXX)
- matrix[i] = ~read_col(i) & 0b11101111; // change CAPS LOCK as released
- } else { // CAPS LOCK in UP
- matrix[i] = ~read_col(i) | 0b00010000; // send fake caps lock down
- }
- } else { // CAPS LOCK is OFF on HOST
- if (matrix[i] != (uint8_t)~read_col(i)) {
- matrix[i] = (uint8_t)~read_col(i);
- if (debouncing) {
- debug("bounce!: "); debug_hex(debouncing); print("\n");
- }
- debouncing = DEBOUNCE;
- }
- }
- } else {
- if (matrix[i] != (uint8_t)~read_col(i)) {
- matrix[i] = (uint8_t)~read_col(i);
- if (debouncing) {
- debug("bounce!: "); debug_hex(debouncing); print("\n");
- }
- debouncing = DEBOUNCE;
- }
- }
- }
- unselect_rows();
-
- if (debouncing) {
- debouncing--;
- }
-
- return 1;
-}
-
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- if (matrix[i] != matrix_prev[i]) {
- return true;
- }
- }
- return false;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
-#ifdef MATRIX_HAS_GHOST
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- if (matrix_has_ghost_in_row(i))
- return true;
- }
-#endif
- return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-// if ( row == ( MATRIX_ROWS - 1 ) && col == 4) { // CHECK CAPS LOCK
-// if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { // CAPS LOCK is ON on HOST
-// if ((matrix_prev[row] & 0b00010000) && (~matrix[row] & 0b00010000)) {
-// debug("CapsLock Reverse:");debug_hex(matrix[row]);
-// matrix[row] |= 0b00010000;
-// matrix_prev[row] &= ~0b00010000;
-// debug("->");debug_hex(matrix[row]);debug("\n");
-// }
-// }
-// }
- return (matrix[row] & (1<<col));
-}
-
-inline
-#if (MATRIX_COLS <= 8)
-uint8_t matrix_get_row(uint8_t row)
-#else
-uint16_t matrix_get_row(uint8_t row)
-#endif
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 01234567\n");
- for (uint8_t row = 0; row < matrix_rows(); row++) {
- phex(row); print(": ");
-#if (MATRIX_COLS <= 8)
- pbin_reverse(matrix_get_row(row));
-#else
- pbin_reverse16(matrix_get_row(row));
-#endif
-#ifdef MATRIX_HAS_GHOST
- if (matrix_has_ghost_in_row(row)) {
- print(" <ghost");
- }
-#endif
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-#if (MATRIX_COLS <= 8)
- count += bitpop(matrix[i]);
-#else
- count += bitpop16(matrix[i]);
-#endif
- }
- return count;
-}
-
-#ifdef MATRIX_HAS_GHOST
-inline
-static bool matrix_has_ghost_in_row(uint8_t row)
-{
- // no ghost exists in case less than 2 keys on
- if (((matrix[row] - 1) & matrix[row]) == 0)
- return false;
-
- // ghost exists in case same state as other row
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- if (i != row && (matrix[i] & matrix[row]) == matrix[row])
- return true;
- }
- return false;
-}
-#endif
-
-inline
-static uint8_t read_col(uint8_t row)
-{
- // For normal : Column C1 ~ C7 (PortC0-6), C0(Port E1)
- // For modifier : B3(CNTRL)/4(SHIFT),F4(CMD/GUI)/5(OPTION,ALT)
- // Modifier would be copied to report->mods except E4(CAPSLOCK)
- uint8_t tmp;
- if ( row == 10 ) {
- tmp = 0xC0;
- tmp |= (PINB >> 3 ) & 0b00000011; // LEFT CTRL is 0bit in modifier (HID Spec)
- // LEFT SHIFT is 1bit in modifier (HID Spec)
- tmp |= (PINF >> 3 ) & 0b00000100; // LEFT ALT is 2bit in modifier (HID Spec)
- tmp |= (PINF >> 1 ) & 0b00001000; // LEFT GUI is 3bit in modifier (HID Spec)
- tmp |= (PINA << 4 ) & 0b00010000; // CAPSLOCK
- tmp |= (PINB << 3 ) & 0b00100000; // POWER
- } else {
- tmp = 0x00;
- tmp = (PINE >> 1)&0b00000001;
- tmp |= PINC << 1 ;
- }
- return tmp;
-}
-
-inline
-static void unselect_rows(void)
-{
- // Hi-Z(DDR:0, PORT:0) to unselect
- // DDR : 1, output 0, input
- DDRB &= ~0b00000011; // PB: 1,0
- PORTB &= ~0b00000011;
- DDRD &= ~0b00010000; // PD: 4
- PORTD &= ~0b00010000;
- DDRE &= ~0b11000000; // PE: 7,6
- PORTE &= ~0b11000000;
- DDRF &= ~0b11000111; // PF: 7,6,2,1,0
- PORTF &= ~0b11000111;
- // to unselect virtual row(modifier), set port to output with low
- DDRA |= 0b00000001; // PA: 0 for CAPSLOCK
- PORTA &= ~0b00000001;
- DDRB |= 0b00011100; // PB: 3,4 for modifier(row10)
- PORTB &= ~0b00011100; // PB: 2 for power
- DDRF |= 0b00110000; // PF: 4,5 for modifier
- PORTF &= ~0b00110000;
-}
-
-inline
-static void select_row(uint8_t row)
-{
- // Output low(DDR:1, PORT:0) to select
- // with row enable, column could send low to AVR when pressed
- // row: 0 1 2 3 4 5 6 7 8 9
- // pin: PB1, PB0, PE7, PE6, PD4, PF2, PF0, PF1, PF6 PF7
- switch (row) {
- case 0:
- DDRB |= (1<<1);
- PORTB &= ~(1<<1);
- break;
- case 1:
- DDRB |= (1<<0);
- PORTB &= ~(1<<0);
- break;
- case 2:
- DDRE |= (1<<7);
- PORTE &= ~(1<<7);
- break;
- case 3:
- DDRE |= (1<<6);
- PORTE &= ~(1<<6);
- break;
- case 4:
- DDRD |= (1<<4);
- PORTD &= ~(1<<4);
- break;
- case 5:
- DDRF |= (1<<2);
- PORTF &= ~(1<<2);
- break;
- case 6:
- DDRF |= (1<<0);
- PORTF &= ~(1<<0);
- break;
- case 7:
- DDRF |= (1<<1);
- PORTF &= ~(1<<1);
- break;
- case 8:
- DDRF |= (1<<6);
- PORTF &= ~(1<<6);
- break;
- case 9:
- DDRF |= (1<<7);
- PORTF &= ~(1<<7);
- break;
- case 10:
- // modifier has no row enable
- // to select virtual row, set port as input
- DDRA &= ~0b00000001;
- PORTA |= 0b00000001;
- DDRB &= ~0b00011100;
- PORTB |= 0b00011100;
- DDRF &= ~0b00110000;
- PORTF |= 0b00110000;
- break;
-
- }
-}