diff options
Diffstat (limited to 'drivers')
52 files changed, 3351 insertions, 1859 deletions
diff --git a/drivers/bluetooth/adafruit_ble.cpp b/drivers/bluetooth/adafruit_ble.cpp new file mode 100644 index 0000000000..34a780e9a5 --- /dev/null +++ b/drivers/bluetooth/adafruit_ble.cpp @@ -0,0 +1,699 @@ +#include "adafruit_ble.h" + +#include <stdio.h> +#include <stdlib.h> +#include <alloca.h> +#include "debug.h" +#include "timer.h" +#include "action_util.h" +#include "ringbuffer.hpp" +#include <string.h> +#include "spi_master.h" +#include "wait.h" +#include "analog.h" +#include "progmem.h" + +// These are the pin assignments for the 32u4 boards. +// You may define them to something else in your config.h +// if yours is wired up differently. +#ifndef ADAFRUIT_BLE_RST_PIN +# define ADAFRUIT_BLE_RST_PIN D4 +#endif + +#ifndef ADAFRUIT_BLE_CS_PIN +# define ADAFRUIT_BLE_CS_PIN B4 +#endif + +#ifndef ADAFRUIT_BLE_IRQ_PIN +# define ADAFRUIT_BLE_IRQ_PIN E6 +#endif + +#ifndef ADAFRUIT_BLE_SCK_DIVISOR +# define ADAFRUIT_BLE_SCK_DIVISOR 2 // 4MHz SCK/8MHz CPU, calculated for Feather 32U4 BLE +#endif + +#define SAMPLE_BATTERY +#define ConnectionUpdateInterval 1000 /* milliseconds */ + +#ifndef BATTERY_LEVEL_PIN +# define BATTERY_LEVEL_PIN B5 +#endif + +static struct { + bool is_connected; + bool initialized; + bool configured; + +#define ProbedEvents 1 +#define UsingEvents 2 + bool event_flags; + +#ifdef SAMPLE_BATTERY + uint16_t last_battery_update; + uint32_t vbat; +#endif + uint16_t last_connection_update; +} state; + +// Commands are encoded using SDEP and sent via SPI +// https://github.com/adafruit/Adafruit_BluefruitLE_nRF51/blob/master/SDEP.md + +#define SdepMaxPayload 16 +struct sdep_msg { + uint8_t type; + uint8_t cmd_low; + uint8_t cmd_high; + struct __attribute__((packed)) { + uint8_t len : 7; + uint8_t more : 1; + }; + uint8_t payload[SdepMaxPayload]; +} __attribute__((packed)); + +// The recv latency is relatively high, so when we're hammering keys quickly, +// we want to avoid waiting for the responses in the matrix loop. We maintain +// a short queue for that. Since there is quite a lot of space overhead for +// the AT command representation wrapped up in SDEP, we queue the minimal +// information here. + +enum queue_type { + QTKeyReport, // 1-byte modifier + 6-byte key report + QTConsumer, // 16-bit key code +#ifdef MOUSE_ENABLE + QTMouseMove, // 4-byte mouse report +#endif +}; + +struct queue_item { + enum queue_type queue_type; + uint16_t added; + union __attribute__((packed)) { + struct __attribute__((packed)) { + uint8_t modifier; + uint8_t keys[6]; + } key; + + uint16_t consumer; + struct __attribute__((packed)) { + int8_t x, y, scroll, pan; + uint8_t buttons; + } mousemove; + }; +}; + +// Items that we wish to send +static RingBuffer<queue_item, 40> send_buf; +// Pending response; while pending, we can't send any more requests. +// This records the time at which we sent the command for which we +// are expecting a response. +static RingBuffer<uint16_t, 2> resp_buf; + +static bool process_queue_item(struct queue_item *item, uint16_t timeout); + +enum sdep_type { + SdepCommand = 0x10, + SdepResponse = 0x20, + SdepAlert = 0x40, + SdepError = 0x80, + SdepSlaveNotReady = 0xFE, // Try again later + SdepSlaveOverflow = 0xFF, // You read more data than is available +}; + +enum ble_cmd { + BleInitialize = 0xBEEF, + BleAtWrapper = 0x0A00, + BleUartTx = 0x0A01, + BleUartRx = 0x0A02, +}; + +enum ble_system_event_bits { + BleSystemConnected = 0, + BleSystemDisconnected = 1, + BleSystemUartRx = 8, + BleSystemMidiRx = 10, +}; + +#define SdepTimeout 150 /* milliseconds */ +#define SdepShortTimeout 10 /* milliseconds */ +#define SdepBackOff 25 /* microseconds */ +#define BatteryUpdateInterval 10000 /* milliseconds */ + +static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout = SdepTimeout); +static bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose = false); + +// Send a single SDEP packet +static bool sdep_send_pkt(const struct sdep_msg *msg, uint16_t timeout) { + spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, ADAFRUIT_BLE_SCK_DIVISOR); + uint16_t timerStart = timer_read(); + bool success = false; + bool ready = false; + + do { + ready = spi_write(msg->type) != SdepSlaveNotReady; + if (ready) { + break; + } + + // Release it and let it initialize + spi_stop(); + wait_us(SdepBackOff); + spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, ADAFRUIT_BLE_SCK_DIVISOR); + } while (timer_elapsed(timerStart) < timeout); + + if (ready) { + // Slave is ready; send the rest of the packet + spi_transmit(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload)) + msg->len); + success = true; + } + + spi_stop(); + + return success; +} + +static inline void sdep_build_pkt(struct sdep_msg *msg, uint16_t command, const uint8_t *payload, uint8_t len, bool moredata) { + msg->type = SdepCommand; + msg->cmd_low = command & 0xFF; + msg->cmd_high = command >> 8; + msg->len = len; + msg->more = (moredata && len == SdepMaxPayload) ? 1 : 0; + + static_assert(sizeof(*msg) == 20, "msg is correctly packed"); + + memcpy(msg->payload, payload, len); +} + +// Read a single SDEP packet +static bool sdep_recv_pkt(struct sdep_msg *msg, uint16_t timeout) { + bool success = false; + uint16_t timerStart = timer_read(); + bool ready = false; + + do { + ready = readPin(ADAFRUIT_BLE_IRQ_PIN); + if (ready) { + break; + } + wait_us(1); + } while (timer_elapsed(timerStart) < timeout); + + if (ready) { + spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, ADAFRUIT_BLE_SCK_DIVISOR); + + do { + // Read the command type, waiting for the data to be ready + msg->type = spi_read(); + if (msg->type == SdepSlaveNotReady || msg->type == SdepSlaveOverflow) { + // Release it and let it initialize + spi_stop(); + wait_us(SdepBackOff); + spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, ADAFRUIT_BLE_SCK_DIVISOR); + continue; + } + + // Read the rest of the header + spi_receive(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload))); + + // and get the payload if there is any + if (msg->len <= SdepMaxPayload) { + spi_receive(msg->payload, msg->len); + } + success = true; + break; + } while (timer_elapsed(timerStart) < timeout); + + spi_stop(); + } + return success; +} + +static void resp_buf_read_one(bool greedy) { + uint16_t last_send; + if (!resp_buf.peek(last_send)) { + return; + } + + if (readPin(ADAFRUIT_BLE_IRQ_PIN)) { + struct sdep_msg msg; + + again: + if (sdep_recv_pkt(&msg, SdepTimeout)) { + if (!msg.more) { + // We got it; consume this entry + resp_buf.get(last_send); + dprintf("recv latency %dms\n", TIMER_DIFF_16(timer_read(), last_send)); + } + + if (greedy && resp_buf.peek(last_send) && readPin(ADAFRUIT_BLE_IRQ_PIN)) { + goto again; + } + } + + } else if (timer_elapsed(last_send) > SdepTimeout * 2) { + dprintf("waiting_for_result: timeout, resp_buf size %d\n", (int)resp_buf.size()); + + // Timed out: consume this entry + resp_buf.get(last_send); + } +} + +static void send_buf_send_one(uint16_t timeout = SdepTimeout) { + struct queue_item item; + + // Don't send anything more until we get an ACK + if (!resp_buf.empty()) { + return; + } + + if (!send_buf.peek(item)) { + return; + } + if (process_queue_item(&item, timeout)) { + // commit that peek + send_buf.get(item); + dprintf("send_buf_send_one: have %d remaining\n", (int)send_buf.size()); + } else { + dprint("failed to send, will retry\n"); + wait_ms(SdepTimeout); + resp_buf_read_one(true); + } +} + +static void resp_buf_wait(const char *cmd) { + bool didPrint = false; + while (!resp_buf.empty()) { + if (!didPrint) { + dprintf("wait on buf for %s\n", cmd); + didPrint = true; + } + resp_buf_read_one(true); + } +} + +static bool ble_init(void) { + state.initialized = false; + state.configured = false; + state.is_connected = false; + + setPinInput(ADAFRUIT_BLE_IRQ_PIN); + + spi_init(); + + // Perform a hardware reset + setPinOutput(ADAFRUIT_BLE_RST_PIN); + writePinHigh(ADAFRUIT_BLE_RST_PIN); + writePinLow(ADAFRUIT_BLE_RST_PIN); + wait_ms(10); + writePinHigh(ADAFRUIT_BLE_RST_PIN); + + wait_ms(1000); // Give it a second to initialize + + state.initialized = true; + return state.initialized; +} + +static inline uint8_t min(uint8_t a, uint8_t b) { return a < b ? a : b; } + +static bool read_response(char *resp, uint16_t resplen, bool verbose) { + char *dest = resp; + char *end = dest + resplen; + + while (true) { + struct sdep_msg msg; + + if (!sdep_recv_pkt(&msg, 2 * SdepTimeout)) { + dprint("sdep_recv_pkt failed\n"); + return false; + } + + if (msg.type != SdepResponse) { + *resp = 0; + return false; + } + + uint8_t len = min(msg.len, end - dest); + if (len > 0) { + memcpy(dest, msg.payload, len); + dest += len; + } + + if (!msg.more) { + // No more data is expected! + break; + } + } + + // Ensure the response is NUL terminated + *dest = 0; + + // "Parse" the result text; we want to snip off the trailing OK or ERROR line + // Rewind past the possible trailing CRLF so that we can strip it + --dest; + while (dest > resp && (dest[0] == '\n' || dest[0] == '\r')) { + *dest = 0; + --dest; + } + + // Look back for start of preceeding line + char *last_line = strrchr(resp, '\n'); + if (last_line) { + ++last_line; + } else { + last_line = resp; + } + + bool success = false; + static const char kOK[] PROGMEM = "OK"; + + success = !strcmp_P(last_line, kOK); + + if (verbose || !success) { + dprintf("result: %s\n", resp); + } + return success; +} + +static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout) { + const char * end = cmd + strlen(cmd); + struct sdep_msg msg; + + if (verbose) { + dprintf("ble send: %s\n", cmd); + } + + if (resp) { + // They want to decode the response, so we need to flush and wait + // for all pending I/O to finish before we start this one, so + // that we don't confuse the results + resp_buf_wait(cmd); + *resp = 0; + } + + // Fragment the command into a series of SDEP packets + while (end - cmd > SdepMaxPayload) { + sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, SdepMaxPayload, true); + if (!sdep_send_pkt(&msg, timeout)) { + return false; + } + cmd += SdepMaxPayload; + } + + sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, end - cmd, false); + if (!sdep_send_pkt(&msg, timeout)) { + return false; + } + + if (resp == NULL) { + uint16_t now = timer_read(); + while (!resp_buf.enqueue(now)) { + resp_buf_read_one(false); + } + uint16_t later = timer_read(); + if (TIMER_DIFF_16(later, now) > 0) { + dprintf("waited %dms for resp_buf\n", TIMER_DIFF_16(later, now)); + } + return true; + } + + return read_response(resp, resplen, verbose); +} + +bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose) { + char *cmdbuf = (char *)alloca(strlen_P(cmd) + 1); + strcpy_P(cmdbuf, cmd); + return at_command(cmdbuf, resp, resplen, verbose); +} + +bool adafruit_ble_is_connected(void) { return state.is_connected; } + +bool adafruit_ble_enable_keyboard(void) { + char resbuf[128]; + + if (!state.initialized && !ble_init()) { + return false; + } + + state.configured = false; + + // Disable command echo + static const char kEcho[] PROGMEM = "ATE=0"; + // Make the advertised name match the keyboard + static const char kGapDevName[] PROGMEM = "AT+GAPDEVNAME=" STR(PRODUCT); + // Turn on keyboard support + static const char kHidEnOn[] PROGMEM = "AT+BLEHIDEN=1"; + + // Adjust intervals to improve latency. This causes the "central" + // system (computer/tablet) to poll us every 10-30 ms. We can't + // set a smaller value than 10ms, and 30ms seems to be the natural + // processing time on my macbook. Keeping it constrained to that + // feels reasonable to type to. + static const char kGapIntervals[] PROGMEM = "AT+GAPINTERVALS=10,30,,"; + + // Reset the device so that it picks up the above changes + static const char kATZ[] PROGMEM = "ATZ"; + + // Turn down the power level a bit + static const char kPower[] PROGMEM = "AT+BLEPOWERLEVEL=-12"; + static PGM_P const configure_commands[] PROGMEM = { + kEcho, kGapIntervals, kGapDevName, kHidEnOn, kPower, kATZ, + }; + + uint8_t i; + for (i = 0; i < sizeof(configure_commands) / sizeof(configure_commands[0]); ++i) { + PGM_P cmd; + memcpy_P(&cmd, configure_commands + i, sizeof(cmd)); + + if (!at_command_P(cmd, resbuf, sizeof(resbuf))) { + dprintf("failed BLE command: %S: %s\n", cmd, resbuf); + goto fail; + } + } + + state.configured = true; + + // Check connection status in a little while; allow the ATZ time + // to kick in. + state.last_connection_update = timer_read(); +fail: + return state.configured; +} + +static void set_connected(bool connected) { + if (connected != state.is_connected) { + if (connected) { + dprint("BLE connected\n"); + } else { + dprint("BLE disconnected\n"); + } + state.is_connected = connected; + + // TODO: if modifiers are down on the USB interface and + // we cut over to BLE or vice versa, they will remain stuck. + // This feels like a good point to do something like clearing + // the keyboard and/or generating a fake all keys up message. + // However, I've noticed that it takes a couple of seconds + // for macOS to to start recognizing key presses after BLE + // is in the connected state, so I worry that doing that + // here may not be good enough. + } +} + +void adafruit_ble_task(void) { + char resbuf[48]; + + if (!state.configured && !adafruit_ble_enable_keyboard()) { + return; + } + resp_buf_read_one(true); + send_buf_send_one(SdepShortTimeout); + + if (resp_buf.empty() && (state.event_flags & UsingEvents) && readPin(ADAFRUIT_BLE_IRQ_PIN)) { + // Must be an event update + if (at_command_P(PSTR("AT+EVENTSTATUS"), resbuf, sizeof(resbuf))) { + uint32_t mask = strtoul(resbuf, NULL, 16); + + if (mask & BleSystemConnected) { + set_connected(true); + } else if (mask & BleSystemDisconnected) { + set_connected(false); + } + } + } + + if (timer_elapsed(state.last_connection_update) > ConnectionUpdateInterval) { + bool shouldPoll = true; + if (!(state.event_flags & ProbedEvents)) { + // Request notifications about connection status changes. + // This only works in SPIFRIEND firmware > 0.6.7, which is why + // we check for this conditionally here. + // Note that at the time of writing, HID reports only work correctly + // with Apple products on firmware version 0.6.7! + // https://forums.adafruit.com/viewtopic.php?f=8&t=104052 + if (at_command_P(PSTR("AT+EVENTENABLE=0x1"), resbuf, sizeof(resbuf))) { + at_command_P(PSTR("AT+EVENTENABLE=0x2"), resbuf, sizeof(resbuf)); + state.event_flags |= UsingEvents; + } + state.event_flags |= ProbedEvents; + + // leave shouldPoll == true so that we check at least once + // before relying solely on events + } else { + shouldPoll = false; + } + + static const char kGetConn[] PROGMEM = "AT+GAPGETCONN"; + state.last_connection_update = timer_read(); + + if (at_command_P(kGetConn, resbuf, sizeof(resbuf))) { + set_connected(atoi(resbuf)); + } + } + +#ifdef SAMPLE_BATTERY + if (timer_elapsed(state.last_battery_update) > BatteryUpdateInterval && resp_buf.empty()) { + state.last_battery_update = timer_read(); + + state.vbat = analogReadPin(BATTERY_LEVEL_PIN); + } +#endif +} + +static bool process_queue_item(struct queue_item *item, uint16_t timeout) { + char cmdbuf[48]; + char fmtbuf[64]; + + // Arrange to re-check connection after keys have settled + state.last_connection_update = timer_read(); + +#if 1 + if (TIMER_DIFF_16(state.last_connection_update, item->added) > 0) { + dprintf("send latency %dms\n", TIMER_DIFF_16(state.last_connection_update, item->added)); + } +#endif + + switch (item->queue_type) { + case QTKeyReport: + strcpy_P(fmtbuf, PSTR("AT+BLEKEYBOARDCODE=%02x-00-%02x-%02x-%02x-%02x-%02x-%02x")); + snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->key.modifier, item->key.keys[0], item->key.keys[1], item->key.keys[2], item->key.keys[3], item->key.keys[4], item->key.keys[5]); + return at_command(cmdbuf, NULL, 0, true, timeout); + + case QTConsumer: + strcpy_P(fmtbuf, PSTR("AT+BLEHIDCONTROLKEY=0x%04x")); + snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->consumer); + return at_command(cmdbuf, NULL, 0, true, timeout); + +#ifdef MOUSE_ENABLE + case QTMouseMove: + strcpy_P(fmtbuf, PSTR("AT+BLEHIDMOUSEMOVE=%d,%d,%d,%d")); + snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->mousemove.x, item->mousemove.y, item->mousemove.scroll, item->mousemove.pan); + if (!at_command(cmdbuf, NULL, 0, true, timeout)) { + return false; + } + strcpy_P(cmdbuf, PSTR("AT+BLEHIDMOUSEBUTTON=")); + if (item->mousemove.buttons & MOUSE_BTN1) { + strcat(cmdbuf, "L"); + } + if (item->mousemove.buttons & MOUSE_BTN2) { + strcat(cmdbuf, "R"); + } + if (item->mousemove.buttons & MOUSE_BTN3) { + strcat(cmdbuf, "M"); + } + if (item->mousemove.buttons == 0) { + strcat(cmdbuf, "0"); + } + return at_command(cmdbuf, NULL, 0, true, timeout); +#endif + default: + return true; + } +} + +void adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uint8_t nkeys) { + struct queue_item item; + bool didWait = false; + + item.queue_type = QTKeyReport; + item.key.modifier = hid_modifier_mask; + item.added = timer_read(); + + while (nkeys >= 0) { + item.key.keys[0] = keys[0]; + item.key.keys[1] = nkeys >= 1 ? keys[1] : 0; + item.key.keys[2] = nkeys >= 2 ? keys[2] : 0; + item.key.keys[3] = nkeys >= 3 ? keys[3] : 0; + item.key.keys[4] = nkeys >= 4 ? keys[4] : 0; + item.key.keys[5] = nkeys >= 5 ? keys[5] : 0; + + if (!send_buf.enqueue(item)) { + if (!didWait) { + dprint("wait for buf space\n"); + didWait = true; + } + send_buf_send_one(); + continue; + } + + if (nkeys <= 6) { + return; + } + + nkeys -= 6; + keys += 6; + } +} + +void adafruit_ble_send_consumer_key(uint16_t usage) { + struct queue_item item; + + item.queue_type = QTConsumer; + item.consumer = usage; + + while (!send_buf.enqueue(item)) { + send_buf_send_one(); + } +} + +#ifdef MOUSE_ENABLE +void adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons) { + struct queue_item item; + + item.queue_type = QTMouseMove; + item.mousemove.x = x; + item.mousemove.y = y; + item.mousemove.scroll = scroll; + item.mousemove.pan = pan; + item.mousemove.buttons = buttons; + + while (!send_buf.enqueue(item)) { + send_buf_send_one(); + } +} +#endif + +uint32_t adafruit_ble_read_battery_voltage(void) { return state.vbat; } + +bool adafruit_ble_set_mode_leds(bool on) { + if (!state.configured) { + return false; + } + + // The "mode" led is the red blinky one + at_command_P(on ? PSTR("AT+HWMODELED=1") : PSTR("AT+HWMODELED=0"), NULL, 0); + + // Pin 19 is the blue "connected" LED; turn that off too. + // When turning LEDs back on, don't turn that LED on if we're + // not connected, as that would be confusing. + at_command_P(on && state.is_connected ? PSTR("AT+HWGPIO=19,1") : PSTR("AT+HWGPIO=19,0"), NULL, 0); + return true; +} + +// https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/ble-generic#at-plus-blepowerlevel +bool adafruit_ble_set_power_level(int8_t level) { + char cmd[46]; + if (!state.configured) { + return false; + } + snprintf(cmd, sizeof(cmd), "AT+BLEPOWERLEVEL=%d", level); + return at_command(cmd, NULL, 0, false); +} diff --git a/drivers/bluetooth/adafruit_ble.h b/drivers/bluetooth/adafruit_ble.h new file mode 100644 index 0000000000..b43e0771d9 --- /dev/null +++ b/drivers/bluetooth/adafruit_ble.h @@ -0,0 +1,59 @@ +/* Bluetooth Low Energy Protocol for QMK. + * Author: Wez Furlong, 2016 + * Supports the Adafruit BLE board built around the nRF51822 chip. + */ + +#pragma once + +#include <stdbool.h> +#include <stdint.h> +#include <string.h> + +#include "config_common.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* Instruct the module to enable HID keyboard support and reset */ +extern bool adafruit_ble_enable_keyboard(void); + +/* Query to see if the BLE module is connected */ +extern bool adafruit_ble_query_is_connected(void); + +/* Returns true if we believe that the BLE module is connected. + * This uses our cached understanding that is maintained by + * calling ble_task() periodically. */ +extern bool adafruit_ble_is_connected(void); + +/* Call this periodically to process BLE-originated things */ +extern void adafruit_ble_task(void); + +/* Generates keypress events for a set of keys. + * The hid modifier mask specifies the state of the modifier keys for + * this set of keys. + * Also sends a key release indicator, so that the keys do not remain + * held down. */ +extern void adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uint8_t nkeys); + +/* Send a consumer usage. + * (milliseconds) */ +extern void adafruit_ble_send_consumer_key(uint16_t usage); + +#ifdef MOUSE_ENABLE +/* Send a mouse/wheel movement report. + * The parameters are signed and indicate positive or negative direction + * change. */ +extern void adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons); +#endif + +/* Compute battery voltage by reading an analog pin. + * Returns the integer number of millivolts */ +extern uint32_t adafruit_ble_read_battery_voltage(void); + +extern bool adafruit_ble_set_mode_leds(bool on); +extern bool adafruit_ble_set_power_level(int8_t level); + +#ifdef __cplusplus +} +#endif diff --git a/drivers/bluetooth/outputselect.c b/drivers/bluetooth/outputselect.c new file mode 100644 index 0000000000..f758c65280 --- /dev/null +++ b/drivers/bluetooth/outputselect.c @@ -0,0 +1,79 @@ +/* +Copyright 2017 Priyadi Iman Nurcahyo +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "outputselect.h" + +#if defined(PROTOCOL_LUFA) +# include "lufa.h" +#endif + +#ifdef MODULE_ADAFRUIT_BLE +# include "adafruit_ble.h" +#endif + +uint8_t desired_output = OUTPUT_DEFAULT; + +/** \brief Set Output + * + * FIXME: Needs doc + */ +void set_output(uint8_t output) { + set_output_user(output); + desired_output = output; +} + +/** \brief Set Output User + * + * FIXME: Needs doc + */ +__attribute__((weak)) void set_output_user(uint8_t output) {} + +static bool is_usb_configured(void) { +#if defined(PROTOCOL_LUFA) + return USB_DeviceState == DEVICE_STATE_Configured; +#endif +} + +/** \brief Auto Detect Output + * + * FIXME: Needs doc + */ +uint8_t auto_detect_output(void) { + if (is_usb_configured()) { + return OUTPUT_USB; + } + +#ifdef MODULE_ADAFRUIT_BLE + if (adafruit_ble_is_connected()) { + return OUTPUT_BLUETOOTH; + } +#endif + +#ifdef BLUETOOTH_ENABLE + return OUTPUT_BLUETOOTH; // should check if BT is connected here +#endif + + return OUTPUT_NONE; +} + +/** \brief Where To Send + * + * FIXME: Needs doc + */ +uint8_t where_to_send(void) { + if (desired_output == OUTPUT_AUTO) { + return auto_detect_output(); + } + return desired_output; +} diff --git a/drivers/bluetooth/outputselect.h b/drivers/bluetooth/outputselect.h new file mode 100644 index 0000000000..c4548e1122 --- /dev/null +++ b/drivers/bluetooth/outputselect.h @@ -0,0 +1,34 @@ +/* +Copyright 2017 Priyadi Iman Nurcahyo +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include <stdint.h> + +enum outputs { + OUTPUT_AUTO, + + OUTPUT_NONE, + OUTPUT_USB, + OUTPUT_BLUETOOTH +}; + +#ifndef OUTPUT_DEFAULT +# define OUTPUT_DEFAULT OUTPUT_AUTO +#endif + +void set_output(uint8_t output); +void set_output_user(uint8_t output); +uint8_t auto_detect_output(void); +uint8_t where_to_send(void); diff --git a/drivers/bluetooth/ringbuffer.hpp b/drivers/bluetooth/ringbuffer.hpp new file mode 100644 index 0000000000..70a3c4881d --- /dev/null +++ b/drivers/bluetooth/ringbuffer.hpp @@ -0,0 +1,66 @@ +#pragma once +// A simple ringbuffer holding Size elements of type T +template <typename T, uint8_t Size> +class RingBuffer { + protected: + T buf_[Size]; + uint8_t head_{0}, tail_{0}; + public: + inline uint8_t nextPosition(uint8_t position) { + return (position + 1) % Size; + } + + inline uint8_t prevPosition(uint8_t position) { + if (position == 0) { + return Size - 1; + } + return position - 1; + } + + inline bool enqueue(const T &item) { + static_assert(Size > 1, "RingBuffer size must be > 1"); + uint8_t next = nextPosition(head_); + if (next == tail_) { + // Full + return false; + } + + buf_[head_] = item; + head_ = next; + return true; + } + + inline bool get(T &dest, bool commit = true) { + auto tail = tail_; + if (tail == head_) { + // No more data + return false; + } + + dest = buf_[tail]; + tail = nextPosition(tail); + + if (commit) { + tail_ = tail; + } + return true; + } + + inline bool empty() const { return head_ == tail_; } + + inline uint8_t size() const { + int diff = head_ - tail_; + if (diff >= 0) { + return diff; + } + return Size + diff; + } + + inline T& front() { + return buf_[tail_]; + } + + inline bool peek(T &item) { + return get(item, false); + } +}; diff --git a/drivers/haptic/solenoid.c b/drivers/haptic/solenoid.c index 25cf344655..7a09940f78 100644 --- a/drivers/haptic/solenoid.c +++ b/drivers/haptic/solenoid.c @@ -19,6 +19,7 @@ #include "solenoid.h" #include "haptic.h" #include "gpio.h" +#include "usb_device_state.h" bool solenoid_on = false; bool solenoid_buzzing = false; @@ -36,7 +37,7 @@ void solenoid_set_buzz(int buzz) { haptic_set_buzz(buzz); } void solenoid_set_dwell(uint8_t dwell) { solenoid_dwell = dwell; } void solenoid_stop(void) { - writePinLow(SOLENOID_PIN); + SOLENOID_PIN_WRITE_INACTIVE(); solenoid_on = false; solenoid_buzzing = false; } @@ -48,7 +49,7 @@ void solenoid_fire(void) { solenoid_on = true; solenoid_buzzing = true; solenoid_start = timer_read(); - writePinHigh(SOLENOID_PIN); + SOLENOID_PIN_WRITE_ACTIVE(); } void solenoid_check(void) { @@ -69,20 +70,23 @@ void solenoid_check(void) { if ((elapsed % (SOLENOID_BUZZ_ACTUATED + SOLENOID_BUZZ_NONACTUATED)) < SOLENOID_BUZZ_ACTUATED) { if (!solenoid_buzzing) { solenoid_buzzing = true; - writePinHigh(SOLENOID_PIN); + SOLENOID_PIN_WRITE_ACTIVE(); } } else { if (solenoid_buzzing) { solenoid_buzzing = false; - writePinLow(SOLENOID_PIN); + SOLENOID_PIN_WRITE_INACTIVE(); } } } } void solenoid_setup(void) { + SOLENOID_PIN_WRITE_INACTIVE(); setPinOutput(SOLENOID_PIN); - solenoid_fire(); + if ((!HAPTIC_OFF_IN_LOW_POWER) || (usb_device_state == USB_DEVICE_STATE_CONFIGURED)) { + solenoid_fire(); + } } -void solenoid_shutdown(void) { writePinLow(SOLENOID_PIN); } +void solenoid_shutdown(void) { SOLENOID_PIN_WRITE_INACTIVE(); } diff --git a/drivers/haptic/solenoid.h b/drivers/haptic/solenoid.h index f2a3bc4c30..653148154f 100644 --- a/drivers/haptic/solenoid.h +++ b/drivers/haptic/solenoid.h @@ -49,6 +49,14 @@ # error SOLENOID_PIN not defined #endif +#ifdef SOLENOID_PIN_ACTIVE_LOW +# define SOLENOID_PIN_WRITE_ACTIVE() writePinLow(SOLENOID_PIN) +# define SOLENOID_PIN_WRITE_INACTIVE() writePinHigh(SOLENOID_PIN) +#else +# define SOLENOID_PIN_WRITE_ACTIVE() writePinHigh(SOLENOID_PIN) +# define SOLENOID_PIN_WRITE_INACTIVE() writePinLow(SOLENOID_PIN) +#endif + void solenoid_buzz_on(void); void solenoid_buzz_off(void); void solenoid_set_buzz(int buzz); diff --git a/drivers/led/apa102.c b/drivers/led/apa102.c index 7396dc3c55..00e7eb4505 100644 --- a/drivers/led/apa102.c +++ b/drivers/led/apa102.c @@ -24,8 +24,8 @@ # elif defined(PROTOCOL_CHIBIOS) # include "hal.h" -# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) -# define APA102_NOPS (100 / (1000000000L / (STM32_SYSCLK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns +# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) || defined(GD32VF103) +# define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns # else # error("APA102_NOPS configuration required") # define APA102_NOPS 0 // this just pleases the compile so the above error is easier to spot diff --git a/drivers/led/ckled2001.c b/drivers/led/ckled2001.c new file mode 100644 index 0000000000..6307303437 --- /dev/null +++ b/drivers/led/ckled2001.c @@ -0,0 +1,226 @@ +/* Copyright 2021 @ Keychron (https://www.keychron.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "ckled2001.h" +#include "i2c_master.h" +#include "wait.h" + +#ifndef CKLED2001_TIMEOUT +# define CKLED2001_TIMEOUT 100 +#endif + +#ifndef CKLED2001_PERSISTENCE +# define CKLED2001_PERSISTENCE 0 +#endif + +#ifndef PHASE_CHANNEL +# define PHASE_CHANNEL MSKPHASE_12CHANNEL +#endif + +// Transfer buffer for TWITransmitData() +uint8_t g_twi_transfer_buffer[20]; + +// These buffers match the CKLED2001 PWM registers. +// The control buffers match the PG0 LED On/Off registers. +// Storing them like this is optimal for I2C transfers to the registers. +// We could optimize this and take out the unused registers from these +// buffers and the transfers in CKLED2001_write_pwm_buffer() but it's +// probably not worth the extra complexity. +uint8_t g_pwm_buffer[DRIVER_COUNT][192]; +bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false}; + +uint8_t g_led_control_registers[DRIVER_COUNT][24] = {0}; +bool g_led_control_registers_update_required[DRIVER_COUNT] = {false}; + +bool CKLED2001_write_register(uint8_t addr, uint8_t reg, uint8_t data) { + // If the transaction fails function returns false. + g_twi_transfer_buffer[0] = reg; + g_twi_transfer_buffer[1] = data; + +#if CKLED2001_PERSISTENCE > 0 + for (uint8_t i = 0; i < CKLED2001_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_TIMEOUT) != 0) { + return false; + } + } +#else + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_TIMEOUT) != 0) { + return false; + } +#endif + return true; +} + +bool CKLED2001_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) { + // Assumes PG1 is already selected. + // If any of the transactions fails function returns false. + // Transmit PWM registers in 12 transfers of 16 bytes. + // g_twi_transfer_buffer[] is 20 bytes + + // Iterate over the pwm_buffer contents at 16 byte intervals. + for (int i = 0; i < 192; i += 16) { + g_twi_transfer_buffer[0] = i; + // Copy the data from i to i+15. + // Device will auto-increment register for data after the first byte + // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer. + for (int j = 0; j < 16; j++) { + g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j]; + } + +#if CKLED2001_PERSISTENCE > 0 + for (uint8_t i = 0; i < CKLED2001_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, CKLED2001_TIMEOUT) != 0) { + return false; + } + } +#else + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, CKLED2001_TIMEOUT) != 0) { + return false; + } +#endif + } + return true; +} + +void CKLED2001_init(uint8_t addr) { + // Select to function page + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); + // Setting LED driver to shutdown mode + CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_SHUT_DOWN_MODE); + // Setting internal channel pulldown/pullup + CKLED2001_write_register(addr, PDU_REG, MSKSET_CA_CB_CHANNEL); + // Select number of scan phase + CKLED2001_write_register(addr, SCAN_PHASE_REG, PHASE_CHANNEL); + // Setting PWM Delay Phase + CKLED2001_write_register(addr, SLEW_RATE_CONTROL_MODE1_REG, MSKPWM_DELAY_PHASE_ENABLE); + // Setting Driving/Sinking Channel Slew Rate + CKLED2001_write_register(addr, SLEW_RATE_CONTROL_MODE2_REG, MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_ENABLE); + // Setting Iref + CKLED2001_write_register(addr, SOFTWARE_SLEEP_REG, MSKSLEEP_DISABLE); + // Set LED CONTROL PAGE (Page 0) + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE); + for (int i = 0; i < LED_CONTROL_ON_OFF_LENGTH; i++) { + CKLED2001_write_register(addr, i, 0x00); + } + + // Set PWM PAGE (Page 1) + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_PWM_PAGE); + for (int i = 0; i < LED_CURRENT_TUNE_LENGTH; i++) { + CKLED2001_write_register(addr, i, 0x00); + } + + // Set CURRENT PAGE (Page 4) + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, CURRENT_TUNE_PAGE); + for (int i = 0; i < LED_CURRENT_TUNE_LENGTH; i++) { + CKLED2001_write_register(addr, i, 0xFF); + } + + // Enable LEDs ON/OFF + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE); + for (int i = 0; i < LED_CONTROL_ON_OFF_LENGTH; i++) { + CKLED2001_write_register(addr, i, 0xFF); + } + + // Select to function page + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); + // Setting LED driver to normal mode + CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_NORMAL_MODE); +} + +void CKLED2001_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + if (index >= 0 && index < DRIVER_LED_TOTAL) { + ckled2001_led led = g_ckled2001_leds[index]; + + g_pwm_buffer[led.driver][led.r] = red; + g_pwm_buffer[led.driver][led.g] = green; + g_pwm_buffer[led.driver][led.b] = blue; + g_pwm_buffer_update_required[led.driver] = true; + } +} + +void CKLED2001_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + CKLED2001_set_color(i, red, green, blue); + } +} + +void CKLED2001_set_led_control_register(uint8_t index, bool red, bool green, bool blue) { + ckled2001_led led = g_ckled2001_leds[index]; + + uint8_t control_register_r = led.r / 8; + uint8_t control_register_g = led.g / 8; + uint8_t control_register_b = led.b / 8; + uint8_t bit_r = led.r % 8; + uint8_t bit_g = led.g % 8; + uint8_t bit_b = led.b % 8; + + if (red) { + g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r); + } else { + g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r); + } + if (green) { + g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g); + } else { + g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g); + } + if (blue) { + g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b); + } else { + g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b); + } + + g_led_control_registers_update_required[led.driver] = true; +} + +void CKLED2001_update_pwm_buffers(uint8_t addr, uint8_t index) { + if (g_pwm_buffer_update_required[index]) { + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_PWM_PAGE); + + // If any of the transactions fail we risk writing dirty PG0, + // refresh page 0 just in case. + if (!CKLED2001_write_pwm_buffer(addr, g_pwm_buffer[index])) { + g_led_control_registers_update_required[index] = true; + } + } + g_pwm_buffer_update_required[index] = false; +} + +void CKLED2001_update_led_control_registers(uint8_t addr, uint8_t index) { + if (g_led_control_registers_update_required[index]) { + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE); + for (int i = 0; i < 24; i++) { + CKLED2001_write_register(addr, i, g_led_control_registers[index][i]); + } + } + g_led_control_registers_update_required[index] = false; +} + +void CKLED2001_return_normal(uint8_t addr) { + // Select to function page + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); + // Setting LED driver to normal mode + CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_NORMAL_MODE); +} + +void CKLED2001_shutdown(uint8_t addr) { + // Select to function page + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); + // Setting LED driver to shutdown mode + CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_SHUT_DOWN_MODE); + // Write SW Sleep Register + CKLED2001_write_register(addr, SOFTWARE_SLEEP_REG, MSKSLEEP_ENABLE); +} diff --git a/drivers/led/ckled2001.h b/drivers/led/ckled2001.h new file mode 100644 index 0000000000..efe399690a --- /dev/null +++ b/drivers/led/ckled2001.h @@ -0,0 +1,339 @@ +/* Copyright 2021 @ Keychron (https://www.keychron.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <stdint.h> +#include <stdbool.h> +#include "progmem.h" + +typedef struct ckled2001_led { + uint8_t driver : 2; + uint8_t r; + uint8_t g; + uint8_t b; +} __attribute__((packed)) ckled2001_led; + +extern const ckled2001_led __flash g_ckled2001_leds[DRIVER_LED_TOTAL]; + +void CKLED2001_init(uint8_t addr); +bool CKLED2001_write_register(uint8_t addr, uint8_t reg, uint8_t data); +bool CKLED2001_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer); + +void CKLED2001_set_color(int index, uint8_t red, uint8_t green, uint8_t blue); +void CKLED2001_set_color_all(uint8_t red, uint8_t green, uint8_t blue); + +void CKLED2001_set_led_control_register(uint8_t index, bool red, bool green, bool blue); + +// This should not be called from an interrupt +// (eg. from a timer interrupt). +// Call this while idle (in between matrix scans). +// If the buffer is dirty, it will update the driver with the buffer. +void CKLED2001_update_pwm_buffers(uint8_t addr, uint8_t index); +void CKLED2001_update_led_control_registers(uint8_t addr, uint8_t index); + +void CKLED2001_return_normal(uint8_t addr); +void CKLED2001_shutdown(uint8_t addr); + +// Registers Page Define +#define CONFIGURE_CMD_PAGE 0xFD +#define LED_CONTROL_PAGE 0x00 +#define LED_PWM_PAGE 0x01 +#define FUNCTION_PAGE 0x03 +#define CURRENT_TUNE_PAGE 0x04 + +// Function Register: address 0x00 +#define CONFIGURATION_REG 0x00 +#define MSKSW_SHUT_DOWN_MODE (0x0 << 0) +#define MSKSW_NORMAL_MODE (0x1 << 0) + +#define DRIVER_ID_REG 0x11 +#define CKLED2001_ID 0x8A + +#define PDU_REG 0x13 +#define MSKSET_CA_CB_CHANNEL 0xAA +#define MSKCLR_CA_CB_CHANNEL 0x00 + +#define SCAN_PHASE_REG 0x14 +#define MSKPHASE_12CHANNEL 0x00 +#define MSKPHASE_11CHANNEL 0x01 +#define MSKPHASE_10CHANNEL 0x02 +#define MSKPHASE_9CHANNEL 0x03 +#define MSKPHASE_8CHANNEL 0x04 +#define MSKPHASE_7CHANNEL 0x05 +#define MSKPHASE_6CHANNEL 0x06 +#define MSKPHASE_5CHANNEL 0x07 +#define MSKPHASE_4CHANNEL 0x08 +#define MSKPHASE_3CHANNEL 0x09 +#define MSKPHASE_2CHANNEL 0x0A +#define MSKPHASE_1CHANNEL 0x0B + +#define SLEW_RATE_CONTROL_MODE1_REG 0x15 +#define MSKPWM_DELAY_PHASE_ENABLE 0x04 +#define MSKPWM_DELAY_PHASE_DISABLE 0x00 + +#define SLEW_RATE_CONTROL_MODE2_REG 0x16 +#define MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_ENABLE 0xC0 +#define MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_DISABLE 0x00 + +#define OPEN_SHORT_ENABLE_REG 0x17 +#define MSKOPEN_DETECTION_ENABLE (0x01 << 7) +#define MSKOPEN_DETECTION_DISABLE (0x00) + +#define MSKSHORT_DETECTION_ENABLE (0x01 << 6) +#define MSKSHORT_DETECTION_DISABLE (0x00) + +#define OPEN_SHORT_DUTY_REG 0x18 +#define OPEN_SHORT_FLAG_REG 0x19 + +#define MSKOPEN_DETECTION_INTERRUPT_ENABLE (0x01 << 7) +#define MSKOPEN_DETECTION_INTERRUPT_DISABLE (0x00) + +#define MSKSHORT_DETECTION_INTERRUPT_ENABLE (0x01 << 6) +#define MSKSHORT_DETECTION_INTERRUPT_DISABLE (0x00) + +#define SOFTWARE_SLEEP_REG 0x1A +#define MSKSLEEP_ENABLE 0x02 +#define MSKSLEEP_DISABLE 0x00 + +// LED Control Registers +#define LED_CONTROL_ON_OFF_FIRST_ADDR 0x0 +#define LED_CONTROL_ON_OFF_LAST_ADDR 0x17 +#define LED_CONTROL_ON_OFF_LENGTH ((LED_CONTROL_ON_OFF_LAST_ADDR - LED_CONTROL_ON_OFF_FIRST_ADDR) + 1) + +#define LED_CONTROL_OPEN_FIRST_ADDR 0x18 +#define LED_CONTROL_OPEN_LAST_ADDR 0x2F +#define LED_CONTROL_OPEN_LENGTH ((LED_CONTROL_OPEN_LAST_ADDR - LED_CONTROL_OPEN_FIRST_ADDR) + 1) + +#define LED_CONTROL_SHORT_FIRST_ADDR 0x30 +#define LED_CONTROL_SHORT_LAST_ADDR 0x47 +#define LED_CONTROL_SHORT_LENGTH ((LED_CONTROL_SHORT_LAST_ADDR - LED_CONTROL_SHORT_FIRST_ADDR) + 1) + +#define LED_CONTROL_PAGE_LENGTH 0x48 + +// LED Control Registers +#define LED_PWM_FIRST_ADDR 0x00 +#define LED_PWM_LAST_ADDR 0xBF +#define LED_PWM_LENGTH 0xC0 + +// Current Tune Registers +#define LED_CURRENT_TUNE_FIRST_ADDR 0x00 +#define LED_CURRENT_TUNE_LAST_ADDR 0x0B +#define LED_CURRENT_TUNE_LENGTH 0x0C + +#define A_1 0x00 +#define A_2 0x01 +#define A_3 0x02 +#define A_4 0x03 +#define A_5 0x04 +#define A_6 0x05 +#define A_7 0x06 +#define A_8 0x07 +#define A_9 0x08 +#define A_10 0x09 +#define A_11 0x0A +#define A_12 0x0B +#define A_13 0x0C +#define A_14 0x0D +#define A_15 0x0E +#define A_16 0x0F + +#define B_1 0x10 +#define B_2 0x11 +#define B_3 0x12 +#define B_4 0x13 +#define B_5 0x14 +#define B_6 0x15 +#define B_7 0x16 +#define B_8 0x17 +#define B_9 0x18 +#define B_10 0x19 +#define B_11 0x1A +#define B_12 0x1B +#define B_13 0x1C +#define B_14 0x1D +#define B_15 0x1E +#define B_16 0x1F + +#define C_1 0x20 +#define C_2 0x21 +#define C_3 0x22 +#define C_4 0x23 +#define C_5 0x24 +#define C_6 0x25 +#define C_7 0x26 +#define C_8 0x27 +#define C_9 0x28 +#define C_10 0x29 +#define C_11 0x2A +#define C_12 0x2B +#define C_13 0x2C +#define C_14 0x2D +#define C_15 0x2E +#define C_16 0x2F + +#define D_1 0x30 +#define D_2 0x31 +#define D_3 0x32 +#define D_4 0x33 +#define D_5 0x34 +#define D_6 0x35 +#define D_7 0x36 +#define D_8 0x37 +#define D_9 0x38 +#define D_10 0x39 +#define D_11 0x3A +#define D_12 0x3B +#define D_13 0x3C +#define D_14 0x3D +#define D_15 0x3E +#define D_16 0x3F + +#define E_1 0x40 +#define E_2 0x41 +#define E_3 0x42 +#define E_4 0x43 +#define E_5 0x44 +#define E_6 0x45 +#define E_7 0x46 +#define E_8 0x47 +#define E_9 0x48 +#define E_10 0x49 +#define E_11 0x4A +#define E_12 0x4B +#define E_13 0x4C +#define E_14 0x4D +#define E_15 0x4E +#define E_16 0x4F + +#define F_1 0x50 +#define F_2 0x51 +#define F_3 0x52 +#define F_4 0x53 +#define F_5 0x54 +#define F_6 0x55 +#define F_7 0x56 +#define F_8 0x57 +#define F_9 0x58 +#define F_10 0x59 +#define F_11 0x5A +#define F_12 0x5B +#define F_13 0x5C +#define F_14 0x5D +#define F_15 0x5E +#define F_16 0x5F + +#define G_1 0x60 +#define G_2 0x61 +#define G_3 0x62 +#define G_4 0x63 +#define G_5 0x64 +#define G_6 0x65 +#define G_7 0x66 +#define G_8 0x67 +#define G_9 0x68 +#define G_10 0x69 +#define G_11 0x6A +#define G_12 0x6B +#define G_13 0x6C +#define G_14 0x6D +#define G_15 0x6E +#define G_16 0x6F + +#define H_1 0x70 +#define H_2 0x71 +#define H_3 0x72 +#define H_4 0x73 +#define H_5 0x74 +#define H_6 0x75 +#define H_7 0x76 +#define H_8 0x77 +#define H_9 0x78 +#define H_10 0x79 +#define H_11 0x7A +#define H_12 0x7B +#define H_13 0x7C +#define H_14 0x7D +#define H_15 0x7E +#define H_16 0x7F + +#define I_1 0x80 +#define I_2 0x81 +#define I_3 0x82 +#define I_4 0x83 +#define I_5 0x84 +#define I_6 0x85 +#define I_7 0x86 +#define I_8 0x87 +#define I_9 0x88 +#define I_10 0x89 +#define I_11 0x8A +#define I_12 0x8B +#define I_13 0x8C +#define I_14 0x8D +#define I_15 0x8E +#define I_16 0x8F + +#define J_1 0x90 +#define J_2 0x91 +#define J_3 0x92 +#define J_4 0x93 +#define J_5 0x94 +#define J_6 0x95 +#define J_7 0x96 +#define J_8 0x97 +#define J_9 0x98 +#define J_10 0x99 +#define J_11 0x9A +#define J_12 0x9B +#define J_13 0x9C +#define J_14 0x9D +#define J_15 0x9E +#define J_16 0x9F + +#define K_1 0xA0 +#define K_2 0xA1 +#define K_3 0xA2 +#define K_4 0xA3 +#define K_5 0xA4 +#define K_6 0xA5 +#define K_7 0xA6 +#define K_8 0xA7 +#define K_9 0xA8 +#define K_10 0xA9 +#define K_11 0xAA +#define K_12 0xAB +#define K_13 0xAC +#define K_14 0xAD +#define K_15 0xAE +#define K_16 0xAF + +#define L_1 0xB0 +#define L_2 0xB1 +#define L_3 0xB2 +#define L_4 0xB3 +#define L_5 0xB4 +#define L_6 0xB5 +#define L_7 0xB6 +#define L_8 0xB7 +#define L_9 0xB8 +#define L_10 0xB9 +#define L_11 0xBA +#define L_12 0xBB +#define L_13 0xBC +#define L_14 0xBD +#define L_15 0xBE +#define L_16 0xBF
\ No newline at end of file diff --git a/drivers/led/issi/is31fl3731-simple.c b/drivers/led/issi/is31fl3731-simple.c index d295772f5e..9d28ea91d0 100644 --- a/drivers/led/issi/is31fl3731-simple.c +++ b/drivers/led/issi/is31fl3731-simple.c @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2019 Clueboard + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -40,6 +41,9 @@ #define ISSI_REG_PICTUREFRAME 0x01 +// Not defined in the datasheet -- See AN for IC +#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting + #define ISSI_REG_SHUTDOWN 0x0A #define ISSI_REG_AUDIOSYNC 0x06 @@ -144,6 +148,9 @@ void IS31FL3731_init(uint8_t addr) { // enable software shutdown IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00); +#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array + IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10); +#endif // this delay was copied from other drivers, might not be needed wait_ms(10); diff --git a/drivers/led/issi/is31fl3731.c b/drivers/led/issi/is31fl3731.c index 110bdc1be4..fbf24c30fb 100644 --- a/drivers/led/issi/is31fl3731.c +++ b/drivers/led/issi/is31fl3731.c @@ -1,5 +1,6 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -39,6 +40,9 @@ #define ISSI_REG_PICTUREFRAME 0x01 +// Not defined in the datasheet -- See AN for IC +#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting + #define ISSI_REG_SHUTDOWN 0x0A #define ISSI_REG_AUDIOSYNC 0x06 @@ -132,6 +136,9 @@ void IS31FL3731_init(uint8_t addr) { // enable software shutdown IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00); +#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array + IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10); +#endif // this delay was copied from other drivers, might not be needed wait_ms(10); diff --git a/drivers/led/issi/is31fl3733.c b/drivers/led/issi/is31fl3733.c index d99e5339c9..371010fd81 100644 --- a/drivers/led/issi/is31fl3733.c +++ b/drivers/led/issi/is31fl3733.c @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -56,6 +57,18 @@ # define ISSI_PERSISTENCE 0 #endif +#ifndef ISSI_PWM_FREQUENCY +# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only +#endif + +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_0R +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_0R +#endif + // Transfer buffer for TWITransmitData() uint8_t g_twi_transfer_buffer[20]; @@ -154,10 +167,14 @@ void IS31FL3733_init(uint8_t addr, uint8_t sync) { // Select PG3 IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + // Set de-ghost pull-up resistors (SWx) + IS31FL3733_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP); + // Set de-ghost pull-down resistors (CSx) + IS31FL3733_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP); // Set global current to maximum. IS31FL3733_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Disable software shutdown. - IS31FL3733_write_register(addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01); + IS31FL3733_write_register(addr, ISSI_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((ISSI_PWM_FREQUENCY & 0b111) << 3) | 0x01); // Wait 10ms to ensure the device has woken up. wait_ms(10); diff --git a/drivers/led/issi/is31fl3733.h b/drivers/led/issi/is31fl3733.h index 64fd38eb19..daa226b41a 100644 --- a/drivers/led/issi/is31fl3733.h +++ b/drivers/led/issi/is31fl3733.h @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -47,6 +48,14 @@ void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bo void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index); +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL +#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time +#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time +#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time +#define PUR_16KR 0x06 // 16k Ohm resistor on all the time +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL + #define A_1 0x00 #define A_2 0x01 #define A_3 0x02 diff --git a/drivers/led/issi/is31fl3736.c b/drivers/led/issi/is31fl3736.c index 7dece1b1eb..dcaabba2ef 100644 --- a/drivers/led/issi/is31fl3736.c +++ b/drivers/led/issi/is31fl3736.c @@ -1,4 +1,5 @@ /* Copyright 2018 Jason Williams (Wilba) + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -54,6 +55,14 @@ # define ISSI_PERSISTENCE 0 #endif +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_0R +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_0R +#endif + // Transfer buffer for TWITransmitData() uint8_t g_twi_transfer_buffer[20]; @@ -140,6 +149,10 @@ void IS31FL3736_init(uint8_t addr) { // Select PG3 IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + // Set de-ghost pull-up resistors (SWx) + IS31FL3736_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP); + // Set de-ghost pull-down resistors (CSx) + IS31FL3736_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP); // Set global current to maximum. IS31FL3736_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Disable software shutdown. diff --git a/drivers/led/issi/is31fl3736.h b/drivers/led/issi/is31fl3736.h index c956c87f7c..a30be90556 100644 --- a/drivers/led/issi/is31fl3736.h +++ b/drivers/led/issi/is31fl3736.h @@ -1,4 +1,5 @@ /* Copyright 2018 Jason Williams (Wilba) + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -60,6 +61,15 @@ void IS31FL3736_mono_set_led_control_register(uint8_t index, bool enabled); void IS31FL3736_update_pwm_buffers(uint8_t addr1, uint8_t addr2); void IS31FL3736_update_led_control_registers(uint8_t addr1, uint8_t addr2); +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor +#define PUR_1KR 0x02 // 1.0k Ohm resistor +#define PUR_2KR 0x03 // 2.0k Ohm resistor +#define PUR_4KR 0x04 // 4.0k Ohm resistor +#define PUR_8KR 0x05 // 8.0k Ohm resistor +#define PUR_16KR 0x06 // 16k Ohm resistor +#define PUR_32KR 0x07 // 32k Ohm resistor + #define A_1 0x00 #define A_2 0x02 #define A_3 0x04 diff --git a/drivers/led/issi/is31fl3737.c b/drivers/led/issi/is31fl3737.c index 0bb4ddd425..62862e0d41 100644 --- a/drivers/led/issi/is31fl3737.c +++ b/drivers/led/issi/is31fl3737.c @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -56,6 +57,14 @@ # define ISSI_PERSISTENCE 0 #endif +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_0R +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_0R +#endif + // Transfer buffer for TWITransmitData() uint8_t g_twi_transfer_buffer[20]; @@ -143,6 +152,10 @@ void IS31FL3737_init(uint8_t addr) { // Select PG3 IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + // Set de-ghost pull-up resistors (SWx) + IS31FL3737_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP); + // Set de-ghost pull-down resistors (CSx) + IS31FL3737_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP); // Set global current to maximum. IS31FL3737_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Disable software shutdown. diff --git a/drivers/led/issi/is31fl3737.h b/drivers/led/issi/is31fl3737.h index 06886e9c9b..97917f1d4f 100644 --- a/drivers/led/issi/is31fl3737.h +++ b/drivers/led/issi/is31fl3737.h @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -47,6 +48,15 @@ void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bo void IS31FL3737_update_pwm_buffers(uint8_t addr1, uint8_t addr2); void IS31FL3737_update_led_control_registers(uint8_t addr1, uint8_t addr2); +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL +#define PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL +#define PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL +#define PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL +#define PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL +#define PUR_16KR 0x06 // 16k Ohm resistor in t_NOL +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL + #define A_1 0x00 #define A_2 0x01 #define A_3 0x02 diff --git a/drivers/led/issi/is31fl3741.c b/drivers/led/issi/is31fl3741.c index 24a273514e..5084f3b9fc 100644 --- a/drivers/led/issi/is31fl3741.c +++ b/drivers/led/issi/is31fl3741.c @@ -61,6 +61,14 @@ # define ISSI_PERSISTENCE 0 #endif +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_32KR +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_32KR +#endif + #define ISSI_MAX_LEDS 351 // Transfer buffer for TWITransmitData() @@ -157,7 +165,7 @@ void IS31FL3741_init(uint8_t addr) { // Set Golbal Current Control Register IS31FL3741_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Set Pull up & Down for SWx CSy - IS31FL3741_write_register(addr, ISSI_REG_PULLDOWNUP, 0x77); + IS31FL3741_write_register(addr, ISSI_REG_PULLDOWNUP, ((ISSI_CSPULLUP << 4) | ISSI_SWPULLUP)); // IS31FL3741_update_led_scaling_registers(addr, 0xFF, 0xFF, 0xFF); diff --git a/drivers/led/issi/is31fl3741.h b/drivers/led/issi/is31fl3741.h index 163a035233..563022b9b0 100644 --- a/drivers/led/issi/is31fl3741.h +++ b/drivers/led/issi/is31fl3741.h @@ -51,6 +51,15 @@ void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue); +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor +#define PUR_1KR 0x02 // 1.0k Ohm resistor +#define PUR_2KR 0x03 // 2.0k Ohm resistor +#define PUR_4KR 0x04 // 4.0k Ohm resistor +#define PUR_8KR 0x05 // 8.0k Ohm resistor +#define PUR_16KR 0x06 // 16k Ohm resistor +#define PUR_32KR 0x07 // 32k Ohm resistor + #define CS1_SW1 0x00 #define CS2_SW1 0x01 #define CS3_SW1 0x02 diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h index 13b73ede9d..3b56d370dc 100644 --- a/drivers/oled/oled_driver.h +++ b/drivers/oled/oled_driver.h @@ -190,6 +190,7 @@ bool oled_init(oled_rotation_t rotation); // Called at the start of oled_init, weak function overridable by the user // rotation - the value passed into oled_init // Return new oled_rotation_t if you want to override default rotation +oled_rotation_t oled_init_kb(oled_rotation_t rotation); oled_rotation_t oled_init_user(oled_rotation_t rotation); // Clears the display buffer, resets cursor position to 0, and sets the buffer to dirty for rendering @@ -285,7 +286,8 @@ uint8_t oled_get_brightness(void); void oled_task(void); // Called at the start of oled_task, weak function overridable by the user -void oled_task_user(void); +bool oled_task_kb(void); +bool oled_task_user(void); // Set the specific 8 lines rows of the screen to scroll. // 0 is the default for start, and 7 for end, which is the entire diff --git a/drivers/oled/ssd1306_sh1106.c b/drivers/oled/ssd1306_sh1106.c index e9049438f5..d9bd3c14bd 100644 --- a/drivers/oled/ssd1306_sh1106.c +++ b/drivers/oled/ssd1306_sh1106.c @@ -167,7 +167,7 @@ bool oled_init(oled_rotation_t rotation) { } #endif - oled_rotation = oled_init_user(rotation); + oled_rotation = oled_init_user(oled_init_kb(rotation)); if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { oled_rotation_width = OLED_DISPLAY_WIDTH; } else { @@ -232,6 +232,7 @@ bool oled_init(oled_rotation_t rotation) { return true; } +__attribute__((weak)) oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return rotation; } __attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } void oled_clear(void) { @@ -741,11 +742,11 @@ void oled_task(void) { if (timer_elapsed(oled_update_timeout) >= OLED_UPDATE_INTERVAL) { oled_update_timeout = timer_read(); oled_set_cursor(0, 0); - oled_task_user(); + oled_task_kb(); } #else oled_set_cursor(0, 0); - oled_task_user(); + oled_task_kb(); #endif #if OLED_SCROLL_TIMEOUT > 0 @@ -776,4 +777,5 @@ void oled_task(void) { #endif } -__attribute__((weak)) void oled_task_user(void) {} +__attribute__((weak)) bool oled_task_kb(void) { return oled_task_user(); } +__attribute__((weak)) bool oled_task_user(void) { return true; } diff --git a/drivers/ps2/ps2.h b/drivers/ps2/ps2.h new file mode 100644 index 0000000000..f123192852 --- /dev/null +++ b/drivers/ps2/ps2.h @@ -0,0 +1,139 @@ +/* +Copyright 2010,2011,2012,2013 Jun WAKO <wakojun@gmail.com> + +This software is licensed with a Modified BSD License. +All of this is supposed to be Free Software, Open Source, DFSG-free, +GPL-compatible, and OK to use in both free and proprietary applications. +Additions and corrections to this file are welcome. + + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + +* Neither the name of the copyright holders nor the names of + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +*/ + +#pragma once + +#include <stdbool.h> +#include "wait.h" +#include "ps2_io.h" +#include "print.h" + +/* + * Primitive PS/2 Library for AVR + * + * PS/2 Resources + * -------------- + * [1] The PS/2 Mouse/Keyboard Protocol + * http://www.computer-engineering.org/ps2protocol/ + * Concise and thorough primer of PS/2 protocol. + * + * [2] Keyboard and Auxiliary Device Controller + * http://www.mcamafia.de/pdf/ibm_hitrc07.pdf + * Signal Timing and Format + * + * [3] Keyboards(101- and 102-key) + * http://www.mcamafia.de/pdf/ibm_hitrc11.pdf + * Keyboard Layout, Scan Code Set, POR, and Commands. + * + * [4] PS/2 Reference Manuals + * http://www.mcamafia.de/pdf/ibm_hitrc07.pdf + * Collection of IBM Personal System/2 documents. + * + * [5] TrackPoint Engineering Specifications for version 3E + * https://web.archive.org/web/20100526161812/http://wwwcssrv.almaden.ibm.com/trackpoint/download.html + */ +#define PS2_ACK 0xFA +#define PS2_RESEND 0xFE +#define PS2_SET_LED 0xED + +// TODO: error numbers +#define PS2_ERR_NONE 0 +#define PS2_ERR_STARTBIT1 1 +#define PS2_ERR_STARTBIT2 2 +#define PS2_ERR_STARTBIT3 3 +#define PS2_ERR_PARITY 0x10 +#define PS2_ERR_NODATA 0x20 + +#define PS2_LED_SCROLL_LOCK 0 +#define PS2_LED_NUM_LOCK 1 +#define PS2_LED_CAPS_LOCK 2 + +extern uint8_t ps2_error; + +void ps2_host_init(void); +uint8_t ps2_host_send(uint8_t data); +uint8_t ps2_host_recv_response(void); +uint8_t ps2_host_recv(void); +void ps2_host_set_led(uint8_t usb_led); + +/*-------------------------------------------------------------------- + * static functions + *------------------------------------------------------------------*/ +static inline uint16_t wait_clock_lo(uint16_t us) { + while (clock_in() && us) { + asm(""); + wait_us(1); + us--; + } + return us; +} +static inline uint16_t wait_clock_hi(uint16_t us) { + while (!clock_in() && us) { + asm(""); + wait_us(1); + us--; + } + return us; +} +static inline uint16_t wait_data_lo(uint16_t us) { + while (data_in() && us) { + asm(""); + wait_us(1); + us--; + } + return us; +} +static inline uint16_t wait_data_hi(uint16_t us) { + while (!data_in() && us) { + asm(""); + wait_us(1); + us--; + } + return us; +} + +/* idle state that device can send */ +static inline void idle(void) { + clock_hi(); + data_hi(); +} + +/* inhibit device to send */ +static inline void inhibit(void) { + clock_lo(); + data_hi(); +} diff --git a/drivers/ps2/ps2_busywait.c b/drivers/ps2/ps2_busywait.c new file mode 100644 index 0000000000..983194eea8 --- /dev/null +++ b/drivers/ps2/ps2_busywait.c @@ -0,0 +1,187 @@ +/* +Copyright 2010,2011,2012,2013 Jun WAKO <wakojun@gmail.com> + +This software is licensed with a Modified BSD License. +All of this is supposed to be Free Software, Open Source, DFSG-free, +GPL-compatible, and OK to use in both free and proprietary applications. +Additions and corrections to this file are welcome. + + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + +* Neither the name of the copyright holders nor the names of + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +*/ + +/* + * PS/2 protocol busywait version + */ + +#include <stdbool.h> +#include "wait.h" +#include "ps2.h" +#include "ps2_io.h" +#include "debug.h" + +#define WAIT(stat, us, err) \ + do { \ + if (!wait_##stat(us)) { \ + ps2_error = err; \ + goto ERROR; \ + } \ + } while (0) + +uint8_t ps2_error = PS2_ERR_NONE; + +void ps2_host_init(void) { + clock_init(); + data_init(); + + // POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20) + wait_ms(2500); + + inhibit(); +} + +uint8_t ps2_host_send(uint8_t data) { + bool parity = true; + ps2_error = PS2_ERR_NONE; + + /* terminate a transmission if we have */ + inhibit(); + wait_us(100); // 100us [4]p.13, [5]p.50 + + /* 'Request to Send' and Start bit */ + data_lo(); + clock_hi(); + WAIT(clock_lo, 10000, 10); // 10ms [5]p.50 + + /* Data bit */ + for (uint8_t i = 0; i < 8; i++) { + wait_us(15); + if (data & (1 << i)) { + parity = !parity; + data_hi(); + } else { + data_lo(); + } + WAIT(clock_hi, 50, 2); + WAIT(clock_lo, 50, 3); + } + + /* Parity bit */ + wait_us(15); + if (parity) { + data_hi(); + } else { + data_lo(); + } + WAIT(clock_hi, 50, 4); + WAIT(clock_lo, 50, 5); + + /* Stop bit */ + wait_us(15); + data_hi(); + + /* Ack */ + WAIT(data_lo, 50, 6); + WAIT(clock_lo, 50, 7); + + /* wait for idle state */ + WAIT(clock_hi, 50, 8); + WAIT(data_hi, 50, 9); + + inhibit(); + return ps2_host_recv_response(); +ERROR: + inhibit(); + return 0; +} + +/* receive data when host want else inhibit communication */ +uint8_t ps2_host_recv_response(void) { + // Command may take 25ms/20ms at most([5]p.46, [3]p.21) + // 250 * 100us(wait for start bit in ps2_host_recv) + uint8_t data = 0; + uint8_t try + = 250; + do { + data = ps2_host_recv(); + } while (try --&&ps2_error); + return data; +} + +/* called after start bit comes */ +uint8_t ps2_host_recv(void) { + uint8_t data = 0; + bool parity = true; + ps2_error = PS2_ERR_NONE; + + /* release lines(idle state) */ + idle(); + + /* start bit [1] */ + WAIT(clock_lo, 100, 1); // TODO: this is enough? + WAIT(data_lo, 1, 2); + WAIT(clock_hi, 50, 3); + + /* data [2-9] */ + for (uint8_t i = 0; i < 8; i++) { + WAIT(clock_lo, 50, 4); + if (data_in()) { + parity = !parity; + data |= (1 << i); + } + WAIT(clock_hi, 50, 5); + } + + /* parity [10] */ + WAIT(clock_lo, 50, 6); + if (data_in() != parity) { + ps2_error = PS2_ERR_PARITY; + goto ERROR; + } + WAIT(clock_hi, 50, 7); + + /* stop bit [11] */ + WAIT(clock_lo, 50, 8); + WAIT(data_hi, 1, 9); + WAIT(clock_hi, 50, 10); + + inhibit(); + return data; +ERROR: + if (ps2_error > PS2_ERR_STARTBIT3) { + xprintf("x%02X\n", ps2_error); + } + inhibit(); + return 0; +} + +/* send LED state to keyboard */ +void ps2_host_set_led(uint8_t led) { + ps2_host_send(0xED); + ps2_host_send(led); +} diff --git a/drivers/ps2/ps2_interrupt.c b/drivers/ps2/ps2_interrupt.c new file mode 100644 index 0000000000..70debd02f7 --- /dev/null +++ b/drivers/ps2/ps2_interrupt.c @@ -0,0 +1,340 @@ +/* +Copyright 2010,2011,2012,2013 Jun WAKO <wakojun@gmail.com> + +This software is licensed with a Modified BSD License. +All of this is supposed to be Free Software, Open Source, DFSG-free, +GPL-compatible, and OK to use in both free and proprietary applications. +Additions and corrections to this file are welcome. + + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + +* Neither the name of the copyright holders nor the names of + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +*/ + +/* + * PS/2 protocol Pin interrupt version + */ + +#include <stdbool.h> + +#if defined(__AVR__) +# include <avr/interrupt.h> +#elif defined(PROTOCOL_CHIBIOS) // TODO: or STM32 ? +// chibiOS headers +# include "ch.h" +# include "hal.h" +#endif + +#include "ps2.h" +#include "ps2_io.h" +#include "print.h" +#include "wait.h" + +#define WAIT(stat, us, err) \ + do { \ + if (!wait_##stat(us)) { \ + ps2_error = err; \ + goto ERROR; \ + } \ + } while (0) + +uint8_t ps2_error = PS2_ERR_NONE; + +static inline uint8_t pbuf_dequeue(void); +static inline void pbuf_enqueue(uint8_t data); +static inline bool pbuf_has_data(void); +static inline void pbuf_clear(void); + +#if defined(PROTOCOL_CHIBIOS) +void ps2_interrupt_service_routine(void); +void palCallback(void *arg) { ps2_interrupt_service_routine(); } + +# define PS2_INT_INIT() \ + { palSetLineMode(PS2_CLOCK_PIN, PAL_MODE_INPUT); } \ + while (0) +# define PS2_INT_ON() \ + { \ + palEnableLineEvent(PS2_CLOCK_PIN, PAL_EVENT_MODE_FALLING_EDGE); \ + palSetLineCallback(PS2_CLOCK_PIN, palCallback, NULL); \ + } \ + while (0) +# define PS2_INT_OFF() \ + { palDisableLineEvent(PS2_CLOCK_PIN); } \ + while (0) +#endif // PROTOCOL_CHIBIOS + +void ps2_host_init(void) { + idle(); + PS2_INT_INIT(); + PS2_INT_ON(); + // POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20) + // wait_ms(2500); +} + +uint8_t ps2_host_send(uint8_t data) { + bool parity = true; + ps2_error = PS2_ERR_NONE; + + PS2_INT_OFF(); + + /* terminate a transmission if we have */ + inhibit(); + wait_us(100); // 100us [4]p.13, [5]p.50 + + /* 'Request to Send' and Start bit */ + data_lo(); + clock_hi(); + WAIT(clock_lo, 10000, 10); // 10ms [5]p.50 + + /* Data bit[2-9] */ + for (uint8_t i = 0; i < 8; i++) { + if (data & (1 << i)) { + parity = !parity; + data_hi(); + } else { + data_lo(); + } + WAIT(clock_hi, 50, 2); + WAIT(clock_lo, 50, 3); + } + + /* Parity bit */ + wait_us(15); + if (parity) { + data_hi(); + } else { + data_lo(); + } + WAIT(clock_hi, 50, 4); + WAIT(clock_lo, 50, 5); + + /* Stop bit */ + wait_us(15); + data_hi(); + + /* Ack */ + WAIT(data_lo, 50, 6); + WAIT(clock_lo, 50, 7); + + /* wait for idle state */ + WAIT(clock_hi, 50, 8); + WAIT(data_hi, 50, 9); + + idle(); + PS2_INT_ON(); + return ps2_host_recv_response(); +ERROR: + idle(); + PS2_INT_ON(); + return 0; +} + +uint8_t ps2_host_recv_response(void) { + // Command may take 25ms/20ms at most([5]p.46, [3]p.21) + uint8_t retry = 25; + while (retry-- && !pbuf_has_data()) { + wait_ms(1); + } + return pbuf_dequeue(); +} + +/* get data received by interrupt */ +uint8_t ps2_host_recv(void) { + if (pbuf_has_data()) { + ps2_error = PS2_ERR_NONE; + return pbuf_dequeue(); + } else { + ps2_error = PS2_ERR_NODATA; + return 0; + } +} + +void ps2_interrupt_service_routine(void) { + static enum { + INIT, + START, + BIT0, + BIT1, + BIT2, + BIT3, + BIT4, + BIT5, + BIT6, + BIT7, + PARITY, + STOP, + } state = INIT; + static uint8_t data = 0; + static uint8_t parity = 1; + + // TODO: abort if elapse 100us from previous interrupt + + // return unless falling edge + if (clock_in()) { + goto RETURN; + } + + state++; + switch (state) { + case START: + if (data_in()) goto ERROR; + break; + case BIT0: + case BIT1: + case BIT2: + case BIT3: + case BIT4: + case BIT5: + case BIT6: + case BIT7: + data >>= 1; + if (data_in()) { + data |= 0x80; + parity++; + } + break; + case PARITY: + if (data_in()) { + if (!(parity & 0x01)) goto ERROR; + } else { + if (parity & 0x01) goto ERROR; + } + break; + case STOP: + if (!data_in()) goto ERROR; + pbuf_enqueue(data); + goto DONE; + break; + default: + goto ERROR; + } + goto RETURN; +ERROR: + ps2_error = state; +DONE: + state = INIT; + data = 0; + parity = 1; +RETURN: + return; +} + +#if defined(__AVR__) +ISR(PS2_INT_VECT) { ps2_interrupt_service_routine(); } +#endif + +/* send LED state to keyboard */ +void ps2_host_set_led(uint8_t led) { + ps2_host_send(0xED); + ps2_host_send(led); +} + +/*-------------------------------------------------------------------- + * Ring buffer to store scan codes from keyboard + *------------------------------------------------------------------*/ +#define PBUF_SIZE 32 +static uint8_t pbuf[PBUF_SIZE]; +static uint8_t pbuf_head = 0; +static uint8_t pbuf_tail = 0; +static inline void pbuf_enqueue(uint8_t data) { +#if defined(__AVR__) + uint8_t sreg = SREG; + cli(); +#elif defined(PROTOCOL_CHIBIOS) + chSysLockFromISR(); +#endif + + uint8_t next = (pbuf_head + 1) % PBUF_SIZE; + if (next != pbuf_tail) { + pbuf[pbuf_head] = data; + pbuf_head = next; + } else { + print("pbuf: full\n"); + } + +#if defined(__AVR__) + SREG = sreg; +#elif defined(PROTOCOL_CHIBIOS) + chSysUnlockFromISR(); +#endif +} +static inline uint8_t pbuf_dequeue(void) { + uint8_t val = 0; + +#if defined(__AVR__) + uint8_t sreg = SREG; + cli(); +#elif defined(PROTOCOL_CHIBIOS) + chSysLock(); +#endif + + if (pbuf_head != pbuf_tail) { + val = pbuf[pbuf_tail]; + pbuf_tail = (pbuf_tail + 1) % PBUF_SIZE; + } + +#if defined(__AVR__) + SREG = sreg; +#elif defined(PROTOCOL_CHIBIOS) + chSysUnlock(); +#endif + + return val; +} +static inline bool pbuf_has_data(void) { +#if defined(__AVR__) + uint8_t sreg = SREG; + cli(); +#elif defined(PROTOCOL_CHIBIOS) + chSysLock(); +#endif + + bool has_data = (pbuf_head != pbuf_tail); + +#if defined(__AVR__) + SREG = sreg; +#elif defined(PROTOCOL_CHIBIOS) + chSysUnlock(); +#endif + return has_data; +} +static inline void pbuf_clear(void) { +#if defined(__AVR__) + uint8_t sreg = SREG; + cli(); +#elif defined(PROTOCOL_CHIBIOS) + chSysLock(); +#endif + + pbuf_head = pbuf_tail = 0; + +#if defined(__AVR__) + SREG = sreg; +#elif defined(PROTOCOL_CHIBIOS) + chSysUnlock(); +#endif +} diff --git a/drivers/ps2/ps2_io.h b/drivers/ps2/ps2_io.h new file mode 100644 index 0000000000..de93cb7a39 --- /dev/null +++ b/drivers/ps2/ps2_io.h @@ -0,0 +1,11 @@ +#pragma once + +void clock_init(void); +void clock_lo(void); +void clock_hi(void); +bool clock_in(void); + +void data_init(void); +void data_lo(void); +void data_hi(void); +bool data_in(void); diff --git a/drivers/ps2/ps2_mouse.c b/drivers/ps2/ps2_mouse.c new file mode 100644 index 0000000000..8a6668b410 --- /dev/null +++ b/drivers/ps2/ps2_mouse.c @@ -0,0 +1,270 @@ +/* +Copyright 2011,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdbool.h> +#include "ps2_mouse.h" +#include "wait.h" +#include "gpio.h" +#include "host.h" +#include "timer.h" +#include "print.h" +#include "report.h" +#include "debug.h" +#include "ps2.h" + +/* ============================= MACROS ============================ */ + +static report_mouse_t mouse_report = {}; + +static inline void ps2_mouse_print_report(report_mouse_t *mouse_report); +static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report); +static inline void ps2_mouse_clear_report(report_mouse_t *mouse_report); +static inline void ps2_mouse_enable_scrolling(void); +static inline void ps2_mouse_scroll_button_task(report_mouse_t *mouse_report); + +/* ============================= IMPLEMENTATION ============================ */ + +/* supports only 3 button mouse at this time */ +void ps2_mouse_init(void) { + ps2_host_init(); + + wait_ms(PS2_MOUSE_INIT_DELAY); // wait for powering up + + PS2_MOUSE_SEND(PS2_MOUSE_RESET, "ps2_mouse_init: sending reset"); + + PS2_MOUSE_RECEIVE("ps2_mouse_init: read BAT"); + PS2_MOUSE_RECEIVE("ps2_mouse_init: read DevID"); + +#ifdef PS2_MOUSE_USE_REMOTE_MODE + ps2_mouse_set_remote_mode(); +#else + ps2_mouse_enable_data_reporting(); +#endif + +#ifdef PS2_MOUSE_ENABLE_SCROLLING + ps2_mouse_enable_scrolling(); +#endif + +#ifdef PS2_MOUSE_USE_2_1_SCALING + ps2_mouse_set_scaling_2_1(); +#endif + + ps2_mouse_init_user(); +} + +__attribute__((weak)) void ps2_mouse_init_user(void) {} + +__attribute__((weak)) void ps2_mouse_moved_user(report_mouse_t *mouse_report) {} + +void ps2_mouse_task(void) { + static uint8_t buttons_prev = 0; + extern int tp_buttons; + + /* receives packet from mouse */ + uint8_t rcv; + rcv = ps2_host_send(PS2_MOUSE_READ_DATA); + if (rcv == PS2_ACK) { + mouse_report.buttons = ps2_host_recv_response() | tp_buttons; + mouse_report.x = ps2_host_recv_response() * PS2_MOUSE_X_MULTIPLIER; + mouse_report.y = ps2_host_recv_response() * PS2_MOUSE_Y_MULTIPLIER; +#ifdef PS2_MOUSE_ENABLE_SCROLLING + mouse_report.v = -(ps2_host_recv_response() & PS2_MOUSE_SCROLL_MASK) * PS2_MOUSE_V_MULTIPLIER; +#endif + } else { + if (debug_mouse) print("ps2_mouse: fail to get mouse packet\n"); + return; + } + + /* if mouse moves or buttons state changes */ + if (mouse_report.x || mouse_report.y || mouse_report.v || ((mouse_report.buttons ^ buttons_prev) & PS2_MOUSE_BTN_MASK)) { +#ifdef PS2_MOUSE_DEBUG_RAW + // Used to debug raw ps2 bytes from mouse + ps2_mouse_print_report(&mouse_report); +#endif + buttons_prev = mouse_report.buttons; + ps2_mouse_convert_report_to_hid(&mouse_report); +#if PS2_MOUSE_SCROLL_BTN_MASK + ps2_mouse_scroll_button_task(&mouse_report); +#endif + if (mouse_report.x || mouse_report.y || mouse_report.v) { + ps2_mouse_moved_user(&mouse_report); + } +#ifdef PS2_MOUSE_DEBUG_HID + // Used to debug the bytes sent to the host + ps2_mouse_print_report(&mouse_report); +#endif + host_mouse_send(&mouse_report); + } + + ps2_mouse_clear_report(&mouse_report); +} + +void ps2_mouse_disable_data_reporting(void) { PS2_MOUSE_SEND(PS2_MOUSE_DISABLE_DATA_REPORTING, "ps2 mouse disable data reporting"); } + +void ps2_mouse_enable_data_reporting(void) { PS2_MOUSE_SEND(PS2_MOUSE_ENABLE_DATA_REPORTING, "ps2 mouse enable data reporting"); } + +void ps2_mouse_set_remote_mode(void) { + PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_REMOTE_MODE, "ps2 mouse set remote mode"); + ps2_mouse_mode = PS2_MOUSE_REMOTE_MODE; +} + +void ps2_mouse_set_stream_mode(void) { + PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_STREAM_MODE, "ps2 mouse set stream mode"); + ps2_mouse_mode = PS2_MOUSE_STREAM_MODE; +} + +void ps2_mouse_set_scaling_2_1(void) { PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_2_1, "ps2 mouse set scaling 2:1"); } + +void ps2_mouse_set_scaling_1_1(void) { PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_1_1, "ps2 mouse set scaling 1:1"); } + +void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution) { PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_RESOLUTION, resolution, "ps2 mouse set resolution"); } + +void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate) { PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_SAMPLE_RATE, sample_rate, "ps2 mouse set sample rate"); } + +/* ============================= HELPERS ============================ */ + +#define X_IS_NEG (mouse_report->buttons & (1 << PS2_MOUSE_X_SIGN)) +#define Y_IS_NEG (mouse_report->buttons & (1 << PS2_MOUSE_Y_SIGN)) +#define X_IS_OVF (mouse_report->buttons & (1 << PS2_MOUSE_X_OVFLW)) +#define Y_IS_OVF (mouse_report->buttons & (1 << PS2_MOUSE_Y_OVFLW)) +static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report) { + // PS/2 mouse data is '9-bit integer'(-256 to 255) which is comprised of sign-bit and 8-bit value. + // bit: 8 7 ... 0 + // sign \8-bit/ + // + // Meanwhile USB HID mouse indicates 8bit data(-127 to 127), note that -128 is not used. + // + // This converts PS/2 data into HID value. Use only -127-127 out of PS/2 9-bit. + mouse_report->x = X_IS_NEG ? ((!X_IS_OVF && -127 <= mouse_report->x && mouse_report->x <= -1) ? mouse_report->x : -127) : ((!X_IS_OVF && 0 <= mouse_report->x && mouse_report->x <= 127) ? mouse_report->x : 127); + mouse_report->y = Y_IS_NEG ? ((!Y_IS_OVF && -127 <= mouse_report->y && mouse_report->y <= -1) ? mouse_report->y : -127) : ((!Y_IS_OVF && 0 <= mouse_report->y && mouse_report->y <= 127) ? mouse_report->y : 127); + +#ifdef PS2_MOUSE_INVERT_BUTTONS + // swap left & right buttons + uint8_t needs_left = mouse_report->buttons & PS2_MOUSE_BTN_RIGHT; + uint8_t needs_right = mouse_report->buttons & PS2_MOUSE_BTN_LEFT; + mouse_report->buttons = (mouse_report->buttons & ~(PS2_MOUSE_BTN_MASK)) | (needs_left ? PS2_MOUSE_BTN_LEFT : 0) | (needs_right ? PS2_MOUSE_BTN_RIGHT : 0); +#else + // remove sign and overflow flags + mouse_report->buttons &= PS2_MOUSE_BTN_MASK; +#endif + +#ifdef PS2_MOUSE_INVERT_X + mouse_report->x = -mouse_report->x; +#endif +#ifndef PS2_MOUSE_INVERT_Y // NOTE if not! + // invert coordinate of y to conform to USB HID mouse + mouse_report->y = -mouse_report->y; +#endif + +#ifdef PS2_MOUSE_ROTATE + int8_t x = mouse_report->x; + int8_t y = mouse_report->y; +# if PS2_MOUSE_ROTATE == 90 + mouse_report->x = y; + mouse_report->y = -x; +# elif PS2_MOUSE_ROTATE == 180 + mouse_report->x = -x; + mouse_report->y = -y; +# elif PS2_MOUSE_ROTATE == 270 + mouse_report->x = -y; + mouse_report->y = x; +# endif +#endif +} + +static inline void ps2_mouse_clear_report(report_mouse_t *mouse_report) { + mouse_report->x = 0; + mouse_report->y = 0; + mouse_report->v = 0; + mouse_report->h = 0; + mouse_report->buttons = 0; +} + +static inline void ps2_mouse_print_report(report_mouse_t *mouse_report) { + if (!debug_mouse) return; + print("ps2_mouse: ["); + print_hex8(mouse_report->buttons); + print("|"); + print_hex8((uint8_t)mouse_report->x); + print(" "); + print_hex8((uint8_t)mouse_report->y); + print(" "); + print_hex8((uint8_t)mouse_report->v); + print(" "); + print_hex8((uint8_t)mouse_report->h); + print("]\n"); +} + +static inline void ps2_mouse_enable_scrolling(void) { + PS2_MOUSE_SEND(PS2_MOUSE_SET_SAMPLE_RATE, "Initiaing scroll wheel enable: Set sample rate"); + PS2_MOUSE_SEND(200, "200"); + PS2_MOUSE_SEND(PS2_MOUSE_SET_SAMPLE_RATE, "Set sample rate"); + PS2_MOUSE_SEND(100, "100"); + PS2_MOUSE_SEND(PS2_MOUSE_SET_SAMPLE_RATE, "Set sample rate"); + PS2_MOUSE_SEND(80, "80"); + PS2_MOUSE_SEND(PS2_MOUSE_GET_DEVICE_ID, "Finished enabling scroll wheel"); + wait_ms(20); +} + +#define PRESS_SCROLL_BUTTONS mouse_report->buttons |= (PS2_MOUSE_SCROLL_BTN_MASK) +#define RELEASE_SCROLL_BUTTONS mouse_report->buttons &= ~(PS2_MOUSE_SCROLL_BTN_MASK) +static inline void ps2_mouse_scroll_button_task(report_mouse_t *mouse_report) { + static enum { + SCROLL_NONE, + SCROLL_BTN, + SCROLL_SENT, + } scroll_state = SCROLL_NONE; + static uint16_t scroll_button_time = 0; + + if (PS2_MOUSE_SCROLL_BTN_MASK == (mouse_report->buttons & (PS2_MOUSE_SCROLL_BTN_MASK))) { + // All scroll buttons are pressed + + if (scroll_state == SCROLL_NONE) { + scroll_button_time = timer_read(); + scroll_state = SCROLL_BTN; + } + + // If the mouse has moved, update the report to scroll instead of move the mouse + if (mouse_report->x || mouse_report->y) { + scroll_state = SCROLL_SENT; + mouse_report->v = -mouse_report->y / (PS2_MOUSE_SCROLL_DIVISOR_V); + mouse_report->h = mouse_report->x / (PS2_MOUSE_SCROLL_DIVISOR_H); + mouse_report->x = 0; + mouse_report->y = 0; +#ifdef PS2_MOUSE_INVERT_H + mouse_report->h = -mouse_report->h; +#endif +#ifdef PS2_MOUSE_INVERT_V + mouse_report->v = -mouse_report->v; +#endif + } + } else if (0 == (PS2_MOUSE_SCROLL_BTN_MASK & mouse_report->buttons)) { + // None of the scroll buttons are pressed + +#if PS2_MOUSE_SCROLL_BTN_SEND + if (scroll_state == SCROLL_BTN && timer_elapsed(scroll_button_time) < PS2_MOUSE_SCROLL_BTN_SEND) { + PRESS_SCROLL_BUTTONS; + host_mouse_send(mouse_report); + wait_ms(100); + RELEASE_SCROLL_BUTTONS; + } +#endif + scroll_state = SCROLL_NONE; + } + + RELEASE_SCROLL_BUTTONS; +} diff --git a/drivers/ps2/ps2_mouse.h b/drivers/ps2/ps2_mouse.h new file mode 100644 index 0000000000..c97c6c893a --- /dev/null +++ b/drivers/ps2/ps2_mouse.h @@ -0,0 +1,177 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include <stdbool.h> +#include "debug.h" +#include "report.h" + +#define PS2_MOUSE_SEND(command, message) \ + do { \ + __attribute__((unused)) uint8_t rcv = ps2_host_send(command); \ + if (debug_mouse) { \ + print((message)); \ + xprintf(" command: %X, result: %X, error: %X \n", command, rcv, ps2_error); \ + } \ + } while (0) + +#define PS2_MOUSE_SEND_SAFE(command, message) \ + do { \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_disable_data_reporting(); \ + } \ + PS2_MOUSE_SEND(command, message); \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_enable_data_reporting(); \ + } \ + } while (0) + +#define PS2_MOUSE_SET_SAFE(command, value, message) \ + do { \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_disable_data_reporting(); \ + } \ + PS2_MOUSE_SEND(command, message); \ + PS2_MOUSE_SEND(value, "Sending value"); \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_enable_data_reporting(); \ + } \ + } while (0) + +#define PS2_MOUSE_RECEIVE(message) \ + do { \ + __attribute__((unused)) uint8_t rcv = ps2_host_recv_response(); \ + if (debug_mouse) { \ + print((message)); \ + xprintf(" result: %X, error: %X \n", rcv, ps2_error); \ + } \ + } while (0) + +__attribute__((unused)) static enum ps2_mouse_mode_e { + PS2_MOUSE_STREAM_MODE, + PS2_MOUSE_REMOTE_MODE, +} ps2_mouse_mode = PS2_MOUSE_STREAM_MODE; + +/* + * Data format: + * byte|7 6 5 4 3 2 1 0 + * ----+---------------------------------------------------------------- + * 0|[Yovflw][Xovflw][Ysign ][Xsign ][ 1 ][Middle][Right ][Left ] + * 1|[ X movement(0-255) ] + * 2|[ Y movement(0-255) ] + */ +#define PS2_MOUSE_BTN_MASK 0x07 +#define PS2_MOUSE_BTN_LEFT 0 +#define PS2_MOUSE_BTN_RIGHT 1 +#define PS2_MOUSE_BTN_MIDDLE 2 +#define PS2_MOUSE_X_SIGN 4 +#define PS2_MOUSE_Y_SIGN 5 +#define PS2_MOUSE_X_OVFLW 6 +#define PS2_MOUSE_Y_OVFLW 7 + +/* mouse button to start scrolling; set 0 to disable scroll */ +#ifndef PS2_MOUSE_SCROLL_BTN_MASK +# define PS2_MOUSE_SCROLL_BTN_MASK (1 << PS2_MOUSE_BTN_MIDDLE) +#endif +/* send button event when button is released within this value(ms); set 0 to disable */ +#ifndef PS2_MOUSE_SCROLL_BTN_SEND +# define PS2_MOUSE_SCROLL_BTN_SEND 300 +#endif +/* divide virtical and horizontal mouse move by this to convert to scroll move */ +#ifndef PS2_MOUSE_SCROLL_DIVISOR_V +# define PS2_MOUSE_SCROLL_DIVISOR_V 2 +#endif +#ifndef PS2_MOUSE_SCROLL_DIVISOR_H +# define PS2_MOUSE_SCROLL_DIVISOR_H 2 +#endif +/* multiply reported mouse values by these */ +#ifndef PS2_MOUSE_X_MULTIPLIER +# define PS2_MOUSE_X_MULTIPLIER 1 +#endif +#ifndef PS2_MOUSE_Y_MULTIPLIER +# define PS2_MOUSE_Y_MULTIPLIER 1 +#endif +#ifndef PS2_MOUSE_V_MULTIPLIER +# define PS2_MOUSE_V_MULTIPLIER 1 +#endif +/* For some mice this will need to be 0x0F */ +#ifndef PS2_MOUSE_SCROLL_MASK +# define PS2_MOUSE_SCROLL_MASK 0xFF +#endif +#ifndef PS2_MOUSE_INIT_DELAY +# define PS2_MOUSE_INIT_DELAY 1000 +#endif + +enum ps2_mouse_command_e { + PS2_MOUSE_RESET = 0xFF, + PS2_MOUSE_RESEND = 0xFE, + PS2_MOSUE_SET_DEFAULTS = 0xF6, + PS2_MOUSE_DISABLE_DATA_REPORTING = 0xF5, + PS2_MOUSE_ENABLE_DATA_REPORTING = 0xF4, + PS2_MOUSE_SET_SAMPLE_RATE = 0xF3, + PS2_MOUSE_GET_DEVICE_ID = 0xF2, + PS2_MOUSE_SET_REMOTE_MODE = 0xF0, + PS2_MOUSE_SET_WRAP_MODE = 0xEC, + PS2_MOUSE_READ_DATA = 0xEB, + PS2_MOUSE_SET_STREAM_MODE = 0xEA, + PS2_MOUSE_STATUS_REQUEST = 0xE9, + PS2_MOUSE_SET_RESOLUTION = 0xE8, + PS2_MOUSE_SET_SCALING_2_1 = 0xE7, + PS2_MOUSE_SET_SCALING_1_1 = 0xE6, +}; + +typedef enum ps2_mouse_resolution_e { + PS2_MOUSE_1_COUNT_MM, + PS2_MOUSE_2_COUNT_MM, + PS2_MOUSE_4_COUNT_MM, + PS2_MOUSE_8_COUNT_MM, +} ps2_mouse_resolution_t; + +typedef enum ps2_mouse_sample_rate_e { + PS2_MOUSE_10_SAMPLES_SEC = 10, + PS2_MOUSE_20_SAMPLES_SEC = 20, + PS2_MOUSE_40_SAMPLES_SEC = 40, + PS2_MOUSE_60_SAMPLES_SEC = 60, + PS2_MOUSE_80_SAMPLES_SEC = 80, + PS2_MOUSE_100_SAMPLES_SEC = 100, + PS2_MOUSE_200_SAMPLES_SEC = 200, +} ps2_mouse_sample_rate_t; + +void ps2_mouse_init(void); + +void ps2_mouse_init_user(void); + +void ps2_mouse_task(void); + +void ps2_mouse_disable_data_reporting(void); + +void ps2_mouse_enable_data_reporting(void); + +void ps2_mouse_set_remote_mode(void); + +void ps2_mouse_set_stream_mode(void); + +void ps2_mouse_set_scaling_2_1(void); + +void ps2_mouse_set_scaling_1_1(void); + +void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution); + +void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate); + +void ps2_mouse_moved_user(report_mouse_t *mouse_report); diff --git a/drivers/qwiic/micro_oled.c b/drivers/qwiic/micro_oled.c deleted file mode 100644 index 8dfff6968f..0000000000 --- a/drivers/qwiic/micro_oled.c +++ /dev/null @@ -1,482 +0,0 @@ -/* Jim Lindblom @ SparkFun Electronics - * October 26, 2014 - * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED - * - * Modified by: - * Emil Varughese @ Edwin Robotics Pvt. Ltd. - * July 27, 2015 - * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ - * - * This code was heavily based around the MicroView library, written by GeekAmmo - * (https://github.com/geekammo/MicroView-Arduino-Library). - * - * Adapted for QMK by: - * Jack Humbert <jack.humb@gmail.com> - * October 11, 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "micro_oled.h" -#include "print.h" -#include <stdlib.h> -#include "util/font5x7.h" -#include "util/font8x16.h" -#include <string.h> - -#define TOTALFONTS 2 -const unsigned char* fonts_pointer[] = {font5x7, font8x16}; - -uint8_t foreColor, drawMode, fontWidth, fontHeight, fontType, fontStartChar, fontTotalChar, cursorX, cursorY; -uint16_t fontMapWidth; - -#ifndef _BV -# define _BV(x) (1 << (x)) -#endif - -#define swap(a, b) \ - { \ - uint8_t t = a; \ - a = b; \ - b = t; \ - } - -uint8_t micro_oled_transfer_buffer[20]; -static uint8_t micro_oled_screen_current[LCDWIDTH * LCDHEIGHT / 8] = {0}; - -/* LCD Memory organised in 64 horizontal pixel and 6 rows of byte - B B .............B ----- - y y .............y \ - t t .............t \ - e e .............e \ - 0 1 .............63 \ - \ - D0 D0.............D0 \ - D1 D1.............D1 / ROW 0 - D2 D2.............D2 / - D3 D3.............D3 / - D4 D4.............D4 / - D5 D5.............D5 / - D6 D6.............D6 / - D7 D7.............D7 ---- - */ -#ifdef NO_LCD_SPLASH -// do not initialize with a splash screen -static uint8_t micro_oled_screen_buffer[LCDWIDTH * LCDHEIGHT / 8] = {0}; -#else -# if LCDWIDTH == 64 -# if LCDHEIGHT == 48 -static uint8_t micro_oled_screen_buffer[] = { - // QMK Logo - generated at http://www.majer.ch/lcd/adf_bitmap.php - // 64x48 image - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60, 0x60, 0x60, 0xF8, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFE, 0xFE, 0xF8, 0x60, 0x60, 0x60, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8C, 0x8C, 0x8C, 0x8C, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x8C, 0x8C, 0x8C, 0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x31, 0x31, 0x31, 0x31, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xF8, 0xF1, 0xE3, 0xE7, 0xCF, 0xCF, 0xCF, 0xCF, 0x00, 0x00, 0xCF, 0xCF, 0xCF, 0xC7, 0xE7, 0xE3, 0xF1, 0xF8, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x31, 0x31, 0x31, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x06, 0x06, 0x1F, 0x7F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8, 0xF8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0x7F, 0x1F, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; -# endif -# elif LCDWIDTH == 128 -# if LCDHEIGHT == 32 -static uint8_t micro_oled_screen_buffer[LCDWIDTH * LCDHEIGHT / 8] = { - // 128x32 qmk image - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0xE0, 0xFC, 0xFC, 0xE0, 0xFC, 0xFC, 0xE0, 0xF0, 0xFC, 0xE0, 0xE0, 0xFC, 0xE0, 0xE0, 0xFC, 0xFC, 0xE0, 0xE0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x10, 0x10, 0x30, 0xE0, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xB2, 0xB2, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, 0x03, 0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xB7, 0xB2, 0xB2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x02, 0x02, 0x03, 0x01, 0x00, 0x06, 0x1F, 0x10, 0x10, 0x10, 0x1F, 0x06, 0x00, 0x03, 0x1E, 0x18, 0x0F, 0x01, 0x0F, 0x18, 0x1E, 0x01, 0x00, 0x0F, 0x1F, 0x12, 0x02, 0x12, 0x13, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x0E, 0x1F, 0x12, 0x02, 0x12, 0x13, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x4D, 0x4D, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xF8, 0xF9, 0xF3, 0xF3, 0xC0, 0x80, 0xF3, 0xF3, 0xF3, 0xF9, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xED, 0x4D, 0x4D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0xC0, 0x00, 0x70, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0C, 0x04, 0x04, 0x04, 0x04, 0x1C, 0xF0, 0x00, 0x00, 0xFC, 0x0C, 0x38, 0xE0, 0x00, 0x00, 0xC0, 0x38, 0x0C, 0xFC, 0x00, 0x00, 0xFC, 0xFC, 0x60, 0x90, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x3F, 0x3F, 0x07, 0x3F, 0x3F, 0x07, 0x0F, 0x3F, 0x07, 0x07, 0x3F, 0x07, 0x07, 0x3F, 0x3F, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x06, 0x04, 0x04, 0x07, 0x01, 0x00, 0x00, 0x13, 0x1E, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x04, 0x04, 0x04, 0x04, 0x07, 0x0D, 0x08, 0x00, 0x07, 0x00, 0x00, 0x01, 0x07, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x07, 0x00, 0x01, 0x03, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; -# elif LCDHEIGHT == 64 -static uint8_t micro_oled_screen_buffer[LCDWIDTH * LCDHEIGHT / 8] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, 0xC0, 0xC0, 0xF8, 0xFC, 0xFC, 0xFE, 0xFE, 0xFF, 0x7F, 0x7E, 0xFE, 0xFF, 0xFF, 0xFE, 0xFE, 0x7F, 0x7F, 0xFE, 0xFE, 0xFF, 0xFF, 0xFE, 0x7E, 0x7F, 0xFF, 0xFE, 0xFE, 0xFC, 0xFC, 0xF8, 0xC0, 0xC0, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x88, 0x88, 0xDD, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xDD, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99, 0x99, 0x99, 0x99, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xF8, 0xF0, 0xF3, 0xF3, 0xE7, 0xE7, 0x00, 0x00, 0xE7, 0xE7, 0xF3, 0xF3, 0xF0, 0xF8, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x99, 0x99, 0x99, 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x0F, 0x1F, 0x3F, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0x3F, 0x1F, 0x0F, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x01, 0x00, 0x00, 0x03, 0x01, 0x00, 0x80, 0x03, 0x03, 0x00, 0x00, 0x01, 0x03, 0x00, 0x80, 0x01, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x11, 0x11, 0x11, 0x0E, 0x00, 0x70, 0x88, 0x04, 0x04, 0x04, 0xF8, 0x00, 0x00, 0x3C, 0xE0, 0xC0, 0x38, 0x1C, 0xE0, 0x80, 0x70, 0x0C, 0x00, 0xF8, 0xAC, 0x24, 0x24, 0x3C, 0x30, 0x00, 0x00, 0xFC, 0x0C, 0x04, 0x00, 0xF8, 0xAC, 0x24, 0x24, 0x2C, 0x30, 0x00, 0x70, 0xDC, 0x04, 0x04, 0x88, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x8C, 0x04, 0x04, 0xF8, 0x00, 0x04, 0x3C, 0xE0, 0x80, 0xF0, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x83, 0x01, 0x01, 0x01, 0x81, 0xFE, 0x3C, 0x00, 0x00, 0xFF, 0x03, 0x0E, 0x70, 0xC0, 0xE0, 0x38, 0x06, 0x03, 0xFF, 0x00, 0x00, 0xFF, 0x18, 0x38, 0x66, 0xC3, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x03, 0x02, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; -// TODO: generate bitmap of QMK logo here -# endif -# else -// catchall for custom screen sizes -static uint8_t micro_oled_screen_buffer[LCDWIDTH * LCDHEIGHT / 8] = {0}; -# endif -#endif - -void micro_oled_init(void) { - i2c_init(); - -#ifdef __AVR__ - i2c_start(I2C_ADDRESS_SA0_1, 100); -#else - i2c_start(I2C_ADDRESS_SA0_1); -#endif - - // Display Init sequence for 64x48 OLED module - send_command(DISPLAYOFF); // 0xAE - - send_command(SETDISPLAYCLOCKDIV); // 0xD5 - send_command(0x80); // the suggested ratio 0x80 - - send_command(SETMULTIPLEX); // 0xA8 - send_command(LCDHEIGHT - 1); - - send_command(SETDISPLAYOFFSET); // 0xD3 - send_command(0x00); // no offset - - send_command(SETSTARTLINE | 0x00); // line #0 - - send_command(CHARGEPUMP); // enable charge pump - send_command(0x14); - - send_command(NORMALDISPLAY); // 0xA6 - send_command(DISPLAYALLONRESUME); // 0xA4 - - // display at regular orientation - send_command(SEGREMAP | 0x1); - send_command(COMSCANDEC); - -// rotate display 180 -#ifdef micro_oled_rotate_180 - send_command(SEGREMAP); - send_command(COMSCANINC); -#endif - - send_command(MEMORYMODE); - send_command(0x02); // 0x02 = 10b, Page addressing mode - - send_command(SETCOMPINS); // 0xDA - if (LCDHEIGHT > 32) { - send_command(0x12); - } else { - send_command(0x02); - } - send_command(SETCONTRAST); // 0x81 - send_command(0x8F); - - send_command(SETPRECHARGE); // 0xd9 - send_command(0xF1); - - send_command(SETVCOMDESELECT); // 0xDB - send_command(0x40); - - send_command(DISPLAYON); //--turn on oled panel - clear_screen(); // Erase hardware memory inside the OLED controller to avoid random data in memory. - send_buffer(); -} - -void send_command(uint8_t command) { - micro_oled_transfer_buffer[0] = I2C_COMMAND; - micro_oled_transfer_buffer[1] = command; - i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100); -} - -void send_data(uint8_t data) { - micro_oled_transfer_buffer[0] = I2C_DATA; - micro_oled_transfer_buffer[1] = data; - i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100); -} - -/** \brief Set SSD1306 page address. - Send page address command and address to the SSD1306 OLED controller. -*/ -void set_page_address(uint8_t address) { - address = (0xB0 | address); - send_command(address); -} - -/** \brief Set SSD1306 column address. - Send column address command and address to the SSD1306 OLED controller. -*/ -void set_column_address(uint8_t address) { - send_command((0x10 | (address >> 4)) + ((128 - LCDWIDTH) >> 8)); - send_command(0x0F & address); -} - -/** \brief Clear SSD1306's memory. - To clear GDRAM inside the LCD controller. -*/ -void clear_screen(void) { - for (int i = 0; i < 8; i++) { - set_page_address(i); - set_column_address(0); - for (int j = 0; j < 0x80; j++) { - send_data(0); - } - } - - memset(micro_oled_screen_current, 0, LCDWIDTH * LCDHEIGHT / 8); -} - -/** \brief Clear SSD1306's memory. - To clear GDRAM inside the LCD controller. -*/ -void clear_buffer(void) { - // 384 - memset(micro_oled_screen_buffer, 0, LCDWIDTH * LCDHEIGHT / 8); -} - -/** \brief Invert display. - The PIXEL_ON color of the display will turn to PIXEL_OFF and the PIXEL_OFF will turn to PIXEL_ON. -*/ -void invert_screen(bool invert) { - if (invert) { - send_command(INVERTDISPLAY); - } else { - send_command(NORMALDISPLAY); - } -} - -/** \brief Set contrast. - OLED contract value from 0 to 255. Note: Contrast level is not very obvious. -*/ -void set_contrast(uint8_t contrast) { - send_command(SETCONTRAST); // 0x81 - send_command(contrast); -} - -/** \brief Transfer display buffer. - Sends the updated buffer to the controller - the current status is checked before to save i2c exectution time -*/ -void send_buffer(void) { - uint8_t i, j; - - uint8_t page_addr = 0xFF; - for (i = 0; i < LCDHEIGHT / 8; i++) { - uint8_t col_addr = 0xFF; - for (j = 0; j < LCDWIDTH; j++) { - if (micro_oled_screen_buffer[i * LCDWIDTH + j] != micro_oled_screen_current[i * LCDWIDTH + j]) { - if (page_addr != i) { - set_page_address(i); - page_addr = i; - } - if (col_addr != j) { - set_column_address(j); - col_addr = j + 1; - } - send_data(micro_oled_screen_buffer[i * LCDWIDTH + j]); - micro_oled_screen_current[i * LCDWIDTH + j] = micro_oled_screen_buffer[i * LCDWIDTH + j]; - } - } - } -} - -/** \brief Draw pixel with color and mode. - Draw color pixel in the screen buffer's x,y position with NORM or XOR draw mode. -*/ -void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode) { - if ((x < 0) || (x >= LCDWIDTH) || (y < 0) || (y >= LCDHEIGHT)) return; - - if (mode == XOR) { - if (color == PIXEL_ON) micro_oled_screen_buffer[x + (y / 8) * LCDWIDTH] ^= _BV((y % 8)); - } else { - if (color == PIXEL_ON) - micro_oled_screen_buffer[x + (y / 8) * LCDWIDTH] |= _BV((y % 8)); - else - micro_oled_screen_buffer[x + (y / 8) * LCDWIDTH] &= ~_BV((y % 8)); - } -} - -/** \brief Draw line with color and mode. -Draw line using color and mode from x0,y0 to x1,y1 of the screen buffer. -*/ -void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode) { - uint8_t steep = abs(y1 - y0) > abs(x1 - x0); - if (steep) { - swap(x0, y0); - swap(x1, y1); - } - - if (x0 > x1) { - swap(x0, x1); - swap(y0, y1); - } - - uint8_t dx, dy; - dx = x1 - x0; - dy = abs(y1 - y0); - - int8_t err = dx / 2; - int8_t ystep; - - if (y0 < y1) { - ystep = 1; - } else { - ystep = -1; - } - - for (; x0 < x1; x0++) { - if (steep) { - draw_pixel(y0, x0, color, mode); - } else { - draw_pixel(x0, y0, color, mode); - } - err -= dy; - if (err < 0) { - y0 += ystep; - err += dx; - } - } -} - -/** \brief Draw horizontal line with color and mode. -Draw horizontal line using color and mode from x,y to x+width,y of the screen buffer. -*/ -void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode) { draw_line(x, y, x + width, y, color, mode); } - -/** \brief Draw vertical line. -Draw vertical line using current fore color and current draw mode from x,y to x,y+height of the screen buffer. -*/ -void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode) { draw_line(x, y, x, y + height, color, mode); } - -/** \brief Draw rectangle with color and mode. -Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer. -*/ -void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { - uint8_t tempHeight; - - draw_line_hori(x, y, width, color, mode); - draw_line_hori(x, y + height - 1, width, color, mode); - - tempHeight = height - 2; - - // skip drawing vertical lines to avoid overlapping of pixel that will - // affect XOR plot if no pixel in between horizontal lines - if (tempHeight < 1) return; - - draw_line_vert(x, y + 1, tempHeight, color, mode); - draw_line_vert(x + width - 1, y + 1, tempHeight, color, mode); -} - -/** \brief Draw rectangle with color and mode. -Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer. -*/ -void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { - uint8_t tempHeight; - - draw_line_hori(x + 1, y, width - 2, color, mode); - draw_line_hori(x + 1, y + height - 1, width - 2, color, mode); - - tempHeight = height - 2; - - // skip drawing vertical lines to avoid overlapping of pixel that will - // affect XOR plot if no pixel in between horizontal lines - if (tempHeight < 1) return; - - draw_line_vert(x, y + 1, tempHeight, color, mode); - draw_line_vert(x + width - 1, y + 1, tempHeight, color, mode); -} - -/** \brief Draw filled rectangle with color and mode. -Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer. -*/ -void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { - // TODO - need to optimise the memory map draw so that this function will not call pixel one by one - for (int i = x; i < x + width; i++) { - draw_line_vert(i, y, height, color, mode); - } -} - -/** \brief Draw filled rectangle with color and mode. -Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer. -*/ -void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { - // TODO - need to optimise the memory map draw so that this function will not call pixel one by one - for (int i = x; i < x + width; i++) { - if (i == x || i == (x + width - 1)) - draw_line_vert(i, y + 1, height - 2, color, mode); - else - draw_line_vert(i, y, height, color, mode); - } -} - -/** \brief Draw character with color and mode. - Draw character c using color and draw mode at x,y. -*/ -void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font) { - // TODO - New routine to take font of any height, at the moment limited to font height in multiple of 8 pixels - - uint8_t rowsToDraw, row, tempC; - uint8_t i, j, temp; - uint16_t charPerBitmapRow, charColPositionOnBitmap, charRowPositionOnBitmap, charBitmapStartPosition; - - if ((font >= TOTALFONTS) || (font < 0)) return; - - uint8_t fontType = font; - uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType] + 0); - uint8_t fontHeight = pgm_read_byte(fonts_pointer[fontType] + 1); - uint8_t fontStartChar = pgm_read_byte(fonts_pointer[fontType] + 2); - uint8_t fontTotalChar = pgm_read_byte(fonts_pointer[fontType] + 3); - uint16_t fontMapWidth = (pgm_read_byte(fonts_pointer[fontType] + 4) * 100) + pgm_read_byte(fonts_pointer[fontType] + 5); // two bytes values into integer 16 - - if ((c < fontStartChar) || (c > (fontStartChar + fontTotalChar - 1))) // no bitmap for the required c - return; - - tempC = c - fontStartChar; - - // each row (in datasheet is call page) is 8 bits high, 16 bit high character will have 2 rows to be drawn - rowsToDraw = fontHeight / 8; // 8 is LCD's page size, see SSD1306 datasheet - if (rowsToDraw <= 1) rowsToDraw = 1; - - // the following draw function can draw anywhere on the screen, but SLOW pixel by pixel draw - if (rowsToDraw == 1) { - for (i = 0; i < fontWidth + 1; i++) { - if (i == fontWidth) // this is done in a weird way because for 5x7 font, there is no margin, this code add a margin after col 5 - temp = 0; - else - temp = pgm_read_byte(fonts_pointer[fontType] + FONTHEADERSIZE + (tempC * fontWidth) + i); - - for (j = 0; j < 8; j++) { // 8 is the LCD's page height (see datasheet for explanation) - if (temp & 0x1) { - draw_pixel(x + i, y + j, color, mode); - } else { - draw_pixel(x + i, y + j, !color, mode); - } - - temp >>= 1; - } - } - return; - } - - // font height over 8 bit - // take character "0" ASCII 48 as example - charPerBitmapRow = fontMapWidth / fontWidth; // 256/8 =32 char per row - charColPositionOnBitmap = tempC % charPerBitmapRow; // =16 - charRowPositionOnBitmap = (int)(tempC / charPerBitmapRow); // =1 - charBitmapStartPosition = (charRowPositionOnBitmap * fontMapWidth * (fontHeight / 8)) + (charColPositionOnBitmap * fontWidth); - - // each row on LCD is 8 bit height (see datasheet for explanation) - for (row = 0; row < rowsToDraw; row++) { - for (i = 0; i < fontWidth; i++) { - temp = pgm_read_byte(fonts_pointer[fontType] + FONTHEADERSIZE + (charBitmapStartPosition + i + (row * fontMapWidth))); - for (j = 0; j < 8; j++) { // 8 is the LCD's page height (see datasheet for explanation) - if (temp & 0x1) { - draw_pixel(x + i, y + j + (row * 8), color, mode); - } else { - draw_pixel(x + i, y + j + (row * 8), !color, mode); - } - temp >>= 1; - } - } - } -} - -void draw_string(uint8_t x, uint8_t y, char* string, uint8_t color, uint8_t mode, uint8_t font) { - if ((font >= TOTALFONTS) || (font < 0)) return; - - uint8_t fontType = font; - uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType] + 0); - - uint8_t cur_x = x; - for (int i = 0; i < strlen(string); i++) { - draw_char(cur_x, y, string[i], color, mode, font); - cur_x += fontWidth + 1; - } -} diff --git a/drivers/qwiic/micro_oled.h b/drivers/qwiic/micro_oled.h deleted file mode 100644 index 6f9106f581..0000000000 --- a/drivers/qwiic/micro_oled.h +++ /dev/null @@ -1,134 +0,0 @@ -/* Jim Lindblom @ SparkFun Electronics - * October 26, 2014 - * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED - * - * Modified by: - * Emil Varughese @ Edwin Robotics Pvt. Ltd. - * July 27, 2015 - * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ - * - * This code was heavily based around the MicroView library, written by GeekAmmo - * (https://github.com/geekammo/MicroView-Arduino-Library). - * - * Adapted for QMK by: - * Jack Humbert <jack.humb@gmail.com> - * October 11, 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "qwiic.h" - -void micro_oled_init(void); - -void send_command(uint8_t command); -void send_data(uint8_t data); -void set_page_address(uint8_t address); -void set_column_address(uint8_t address); -void clear_screen(void); -void clear_buffer(void); -void send_buffer(void); -void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode); -void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode); -void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode); -void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode); -void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); -void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); -void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); -void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); -void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font); -void draw_string(uint8_t x, uint8_t y, char* string, uint8_t color, uint8_t mode, uint8_t font); - -#define I2C_ADDRESS_SA0_0 0b0111100 -#ifndef I2C_ADDRESS_SA0_1 -# define I2C_ADDRESS_SA0_1 0b0111101 -#endif -#define I2C_COMMAND 0x00 -#define I2C_DATA 0x40 -#define PIXEL_OFF 0 -#define PIXEL_ON 1 - -#ifndef LCDWIDTH -# define LCDWIDTH 64 -#endif -#ifndef LCDHEIGHT -# define LCDHEIGHT 48 -#endif -#define FONTHEADERSIZE 6 - -#define NORM 0 -#define XOR 1 - -#define PAGE 0 -#define ALL 1 - -#define WIDGETSTYLE0 0 -#define WIDGETSTYLE1 1 -#define WIDGETSTYLE2 2 - -#define SETCONTRAST 0x81 -#define DISPLAYALLONRESUME 0xA4 -#define DISPLAYALLON 0xA5 -#define NORMALDISPLAY 0xA6 -#define INVERTDISPLAY 0xA7 -#define DISPLAYOFF 0xAE -#define DISPLAYON 0xAF -#define SETDISPLAYOFFSET 0xD3 -#define SETCOMPINS 0xDA -#define SETVCOMDESELECT 0xDB -#define SETDISPLAYCLOCKDIV 0xD5 -#define SETPRECHARGE 0xD9 -#define SETMULTIPLEX 0xA8 -#define SETLOWCOLUMN 0x00 -#define SETHIGHCOLUMN 0x10 -#define SETSTARTLINE 0x40 -#define MEMORYMODE 0x20 -#define COMSCANINC 0xC0 -#define COMSCANDEC 0xC8 -#define SEGREMAP 0xA0 -#define CHARGEPUMP 0x8D -#define EXTERNALVCC 0x01 -#define SWITCHCAPVCC 0x02 - -// Scroll -#define ACTIVATESCROLL 0x2F -#define DEACTIVATESCROLL 0x2E -#define SETVERTICALSCROLLAREA 0xA3 -#define RIGHTHORIZONTALSCROLL 0x26 -#define LEFT_HORIZONTALSCROLL 0x27 -#define VERTICALRIGHTHORIZONTALSCROLL 0x29 -#define VERTICALLEFTHORIZONTALSCROLL 0x2A - -typedef enum CMD { - CMD_CLEAR, // 0 - CMD_INVERT, // 1 - CMD_CONTRAST, // 2 - CMD_DISPLAY, // 3 - CMD_SETCURSOR, // 4 - CMD_PIXEL, // 5 - CMD_LINE, // 6 - CMD_LINEH, // 7 - CMD_LINEV, // 8 - CMD_RECT, // 9 - CMD_RECTFILL, // 10 - CMD_CIRCLE, // 11 - CMD_CIRCLEFILL, // 12 - CMD_DRAWCHAR, // 13 - CMD_DRAWBITMAP, // 14 - CMD_GETLCDWIDTH, // 15 - CMD_GETLCDHEIGHT, // 16 - CMD_SETCOLOR, // 17 - CMD_SETDRAWMODE // 18 -} commCommand_t; diff --git a/drivers/qwiic/qwiic.c b/drivers/qwiic/qwiic.c deleted file mode 100644 index 316d6539cb..0000000000 --- a/drivers/qwiic/qwiic.c +++ /dev/null @@ -1,31 +0,0 @@ -/* Copyright 2018 Jack Humbert <jack.humb@gmail.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "qwiic.h" - -void qwiic_init(void) { -#ifdef QWIIC_JOYSTIIC_ENABLE - joystiic_init(); -#endif -#ifdef QWIIC_MICRO_OLED_ENABLE - micro_oled_init(); -#endif -} - -void qwiic_task(void) { -#ifdef QWIIC_JOYSTIIC_ENABLE - joystiic_task(); -#endif -} diff --git a/drivers/qwiic/qwiic.h b/drivers/qwiic/qwiic.h deleted file mode 100644 index 8c3d1c8d63..0000000000 --- a/drivers/qwiic/qwiic.h +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2018 Jack Humbert <jack.humb@gmail.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "i2c_master.h" - -#ifdef QWIIC_JOYSTIIC_ENABLE -# include "joystiic.h" -#endif -#ifdef QWIIC_MICRO_OLED_ENABLE -# include "micro_oled.h" -#endif - -void qwiic_init(void); -void qwiic_task(void); diff --git a/drivers/qwiic/qwiic.mk b/drivers/qwiic/qwiic.mk deleted file mode 100644 index 164bd72108..0000000000 --- a/drivers/qwiic/qwiic.mk +++ /dev/null @@ -1,17 +0,0 @@ -ifeq ($(strip $(QWIIC_ENABLE)),yes) - COMMON_VPATH += $(DRIVER_PATH)/qwiic - OPT_DEFS += -DQWIIC_ENABLE - SRC += qwiic.c - QUANTUM_LIB_SRC += i2c_master.c - -ifneq ($(filter JOYSTIIC, $(QWIIC_DRIVERS)),) - OPT_DEFS += -DQWIIC_JOYSTIIC_ENABLE - SRC += joystiic.c -endif - -ifneq ($(filter MICRO_OLED, $(QWIIC_DRIVERS)),) - OPT_DEFS += -DQWIIC_MICRO_OLED_ENABLE - SRC += micro_oled.c -endif - -endif diff --git a/drivers/qwiic/util/font5x7.h b/drivers/qwiic/util/font5x7.h deleted file mode 100644 index a641945aae..0000000000 --- a/drivers/qwiic/util/font5x7.h +++ /dev/null @@ -1,39 +0,0 @@ -/****************************************************************************** -font5x7.h -Definition for small font - -This file was imported from the MicroView library, written by GeekAmmo -(https://github.com/geekammo/MicroView-Arduino-Library), and released under -the terms of the GNU General Public License as published by the Free Software -Foundation, either version 3 of the License, or (at your option) any later -version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. - -Modified by: -Emil Varughese @ Edwin Robotics Pvt. Ltd. -July 27, 2015 -https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ - -******************************************************************************/ -#pragma once - -#include "progmem.h" - -// Standard ASCII 5x7 font -static const unsigned char font5x7[] PROGMEM = { - // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256) - 5, 8, 0, 255, 12, 75, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, 0x18, 0x3C, 0x18, 0x00, 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, 0x18, 0x24, 0x18, 0x00, 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x26, 0x29, 0x79, 0x29, 0x26, 0x40, 0x7F, 0x05, 0x05, 0x07, 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x14, 0x22, 0x7F, 0x22, 0x14, 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, 0x66, 0x89, 0x95, 0x6A, 0x60, 0x60, 0x60, 0x60, 0x60, 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x08, 0x04, 0x7E, 0x04, 0x08, 0x10, 0x20, 0x7E, 0x20, 0x10, 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x30, 0x38, 0x3E, 0x38, 0x30, - 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x23, 0x13, 0x08, 0x64, 0x62, 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, 0x80, 0x70, 0x30, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x60, 0x60, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, 0x42, 0x7F, 0x40, 0x00, 0x72, 0x49, 0x49, 0x49, 0x46, 0x21, 0x41, 0x49, 0x4D, 0x33, 0x18, 0x14, 0x12, 0x7F, 0x10, 0x27, 0x45, 0x45, 0x45, 0x39, 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x41, 0x21, 0x11, 0x09, 0x07, 0x36, 0x49, 0x49, 0x49, 0x36, 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, 0x08, 0x14, 0x22, 0x41, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, 0x41, 0x22, 0x14, 0x08, 0x02, - 0x01, 0x59, 0x09, 0x06, 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x7F, 0x49, 0x49, 0x49, 0x36, 0x3E, 0x41, 0x41, 0x41, 0x22, 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x49, 0x49, 0x49, 0x41, 0x7F, 0x09, 0x09, 0x09, 0x01, 0x3E, 0x41, 0x41, 0x51, 0x73, 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, 0x41, 0x7F, 0x41, 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01, 0x7F, 0x08, 0x14, 0x22, 0x41, 0x7F, 0x40, 0x40, 0x40, 0x40, 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x09, 0x09, 0x09, 0x06, 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x7F, 0x09, 0x19, 0x29, 0x46, 0x26, 0x49, 0x49, 0x49, 0x32, 0x03, 0x01, 0x7F, 0x01, 0x03, 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x63, 0x14, 0x08, 0x14, 0x63, 0x03, 0x04, 0x78, 0x04, 0x03, 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, 0x41, 0x41, 0x41, 0x7F, 0x04, 0x02, 0x01, 0x02, 0x04, 0x40, 0x40, - 0x40, 0x40, 0x40, 0x00, 0x03, 0x07, 0x08, 0x00, 0x20, 0x54, 0x54, 0x78, 0x40, 0x7F, 0x28, 0x44, 0x44, 0x38, 0x38, 0x44, 0x44, 0x44, 0x28, 0x38, 0x44, 0x44, 0x28, 0x7F, 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, 0x08, 0x7E, 0x09, 0x02, 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, 0x44, 0x7D, 0x40, 0x00, 0x20, 0x40, 0x40, 0x3D, 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00, 0x7C, 0x04, 0x78, 0x04, 0x78, 0x7C, 0x08, 0x04, 0x04, 0x78, 0x38, 0x44, 0x44, 0x44, 0x38, 0xFC, 0x18, 0x24, 0x24, 0x18, 0x18, 0x24, 0x24, 0x18, 0xFC, 0x7C, 0x08, 0x04, 0x04, 0x08, 0x48, 0x54, 0x54, 0x54, 0x24, 0x04, 0x04, 0x3F, 0x44, 0x24, 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x44, 0x28, 0x10, 0x28, 0x44, 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, 0x41, 0x36, 0x08, 0x00, 0x02, 0x01, 0x02, 0x04, 0x02, 0x3C, 0x26, 0x23, - 0x26, 0x3C, 0x1E, 0xA1, 0xA1, 0x61, 0x12, 0x3A, 0x40, 0x40, 0x20, 0x7A, 0x38, 0x54, 0x54, 0x55, 0x59, 0x21, 0x55, 0x55, 0x79, 0x41, 0x21, 0x54, 0x54, 0x78, 0x41, 0x21, 0x55, 0x54, 0x78, 0x40, 0x20, 0x54, 0x55, 0x79, 0x40, 0x0C, 0x1E, 0x52, 0x72, 0x12, 0x39, 0x55, 0x55, 0x55, 0x59, 0x39, 0x54, 0x54, 0x54, 0x59, 0x39, 0x55, 0x54, 0x54, 0x58, 0x00, 0x00, 0x45, 0x7C, 0x41, 0x00, 0x02, 0x45, 0x7D, 0x42, 0x00, 0x01, 0x45, 0x7C, 0x40, 0xF0, 0x29, 0x24, 0x29, 0xF0, 0xF0, 0x28, 0x25, 0x28, 0xF0, 0x7C, 0x54, 0x55, 0x45, 0x00, 0x20, 0x54, 0x54, 0x7C, 0x54, 0x7C, 0x0A, 0x09, 0x7F, 0x49, 0x32, 0x49, 0x49, 0x49, 0x32, 0x32, 0x48, 0x48, 0x48, 0x32, 0x32, 0x4A, 0x48, 0x48, 0x30, 0x3A, 0x41, 0x41, 0x21, 0x7A, 0x3A, 0x42, 0x40, 0x20, 0x78, 0x00, 0x9D, 0xA0, 0xA0, 0x7D, 0x39, 0x44, 0x44, 0x44, 0x39, 0x3D, 0x40, 0x40, 0x40, 0x3D, 0x3C, 0x24, 0xFF, 0x24, 0x24, 0x48, 0x7E, 0x49, 0x43, 0x66, 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, 0xFF, 0x09, 0x29, 0xF6, 0x20, 0xC0, 0x88, 0x7E, 0x09, - 0x03, 0x20, 0x54, 0x54, 0x79, 0x41, 0x00, 0x00, 0x44, 0x7D, 0x41, 0x30, 0x48, 0x48, 0x4A, 0x32, 0x38, 0x40, 0x40, 0x22, 0x7A, 0x00, 0x7A, 0x0A, 0x0A, 0x72, 0x7D, 0x0D, 0x19, 0x31, 0x7D, 0x26, 0x29, 0x29, 0x2F, 0x28, 0x26, 0x29, 0x29, 0x29, 0x26, 0x30, 0x48, 0x4D, 0x40, 0x20, 0x38, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x38, 0x2F, 0x10, 0xC8, 0xAC, 0xBA, 0x2F, 0x10, 0x28, 0x34, 0xFA, 0x00, 0x00, 0x7B, 0x00, 0x00, 0x08, 0x14, 0x2A, 0x14, 0x22, 0x22, 0x14, 0x2A, 0x14, 0x08, 0xAA, 0x00, 0x55, 0x00, 0xAA, 0xAA, 0x55, 0xAA, 0x55, 0xAA, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x10, 0x10, 0x10, 0xFF, 0x00, 0x14, 0x14, 0x14, 0xFF, 0x00, 0x10, 0x10, 0xFF, 0x00, 0xFF, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x14, 0x14, 0x14, 0xFC, 0x00, 0x14, 0x14, 0xF7, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x14, 0x14, 0xF4, 0x04, 0xFC, 0x14, 0x14, 0x17, 0x10, 0x1F, 0x10, 0x10, 0x1F, 0x10, 0x1F, 0x14, 0x14, 0x14, 0x1F, 0x00, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, - 0x10, 0x10, 0x10, 0x1F, 0x10, 0x10, 0x10, 0x10, 0xF0, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0xFF, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x14, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0x00, 0x1F, 0x10, 0x17, 0x00, 0x00, 0xFC, 0x04, 0xF4, 0x14, 0x14, 0x17, 0x10, 0x17, 0x14, 0x14, 0xF4, 0x04, 0xF4, 0x00, 0x00, 0xFF, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0xF7, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x17, 0x14, 0x10, 0x10, 0x1F, 0x10, 0x1F, 0x14, 0x14, 0x14, 0xF4, 0x14, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x00, 0x00, 0x1F, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x14, 0x00, 0x00, 0x00, 0xFC, 0x14, 0x00, 0x00, 0xF0, 0x10, 0xF0, 0x10, 0x10, 0xFF, 0x10, 0xFF, 0x14, 0x14, 0x14, 0xFF, 0x14, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x10, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x38, 0x44, 0x44, 0x38, 0x44, 0x7C, - 0x2A, 0x2A, 0x3E, 0x14, 0x7E, 0x02, 0x02, 0x06, 0x06, 0x02, 0x7E, 0x02, 0x7E, 0x02, 0x63, 0x55, 0x49, 0x41, 0x63, 0x38, 0x44, 0x44, 0x3C, 0x04, 0x40, 0x7E, 0x20, 0x1E, 0x20, 0x06, 0x02, 0x7E, 0x02, 0x02, 0x99, 0xA5, 0xE7, 0xA5, 0x99, 0x1C, 0x2A, 0x49, 0x2A, 0x1C, 0x4C, 0x72, 0x01, 0x72, 0x4C, 0x30, 0x4A, 0x4D, 0x4D, 0x30, 0x30, 0x48, 0x78, 0x48, 0x30, 0xBC, 0x62, 0x5A, 0x46, 0x3D, 0x3E, 0x49, 0x49, 0x49, 0x00, 0x7E, 0x01, 0x01, 0x01, 0x7E, 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 0x44, 0x44, 0x5F, 0x44, 0x44, 0x40, 0x51, 0x4A, 0x44, 0x40, 0x40, 0x44, 0x4A, 0x51, 0x40, 0x00, 0x00, 0xFF, 0x01, 0x03, 0xE0, 0x80, 0xFF, 0x00, 0x00, 0x08, 0x08, 0x6B, 0x6B, 0x08, 0x36, 0x12, 0x36, 0x24, 0x36, 0x06, 0x0F, 0x09, 0x0F, 0x06, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00, 0x30, 0x40, 0xFF, 0x01, 0x01, 0x00, 0x1F, 0x01, 0x01, 0x1E, 0x00, 0x19, 0x1D, 0x17, 0x12, 0x00, 0x3C, 0x3C, 0x3C, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00}; diff --git a/drivers/qwiic/util/font8x16.h b/drivers/qwiic/util/font8x16.h deleted file mode 100644 index 4d3c237866..0000000000 --- a/drivers/qwiic/util/font8x16.h +++ /dev/null @@ -1,39 +0,0 @@ -/****************************************************************************** -font8x16.h -Definition for medium font - -This file was imported from the MicroView library, written by GeekAmmo -(https://github.com/geekammo/MicroView-Arduino-Library), and released under -the terms of the GNU General Public License as published by the Free Software -Foundation, either version 3 of the License, or (at your option) any later -version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. - -Modified by: -Emil Varughese @ Edwin Robotics Pvt. Ltd. -July 27, 2015 -https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ -******************************************************************************/ -#pragma once - -#include "progmem.h" - -static const unsigned char font8x16[] PROGMEM = { - // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256) - 8, 16, 32, 96, 2, 56, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xBE, 0x90, 0xD0, 0xBE, 0x90, 0x00, 0x00, 0x1C, 0x62, 0xFF, 0xC2, 0x80, 0x00, 0x00, 0x0C, 0x12, 0x92, 0x4C, 0xB0, 0x88, 0x06, 0x00, 0x80, 0x7C, 0x62, 0xB2, 0x1C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x18, 0x04, 0x02, 0x02, 0x00, 0x00, 0x00, 0x02, 0x02, 0x04, 0x18, 0xE0, 0x00, 0x00, 0x00, 0x24, 0x18, 0x7E, 0x18, 0x24, 0x00, 0x00, 0x80, 0x80, 0x80, 0xF0, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x18, 0x06, 0x00, 0x00, 0xF8, 0x04, 0xC2, 0x32, 0x0C, 0xF8, 0x00, 0x00, 0x00, 0x04, 0x04, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22, - 0x1C, 0x00, 0x00, 0x00, 0x02, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xC0, 0xA0, 0x98, 0x84, 0xFE, 0x80, 0x80, 0x00, 0x00, 0x1E, 0x12, 0x12, 0x22, 0xC2, 0x00, 0x00, 0xF8, 0x44, 0x22, 0x22, 0x22, 0xC0, 0x00, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x8C, 0x52, 0x22, 0x52, 0x8C, 0x00, 0x00, 0x3C, 0x42, 0x42, 0x42, 0x26, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x40, 0x40, 0x20, 0x20, 0x10, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00, 0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x80, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x0F, 0x04, 0x03, 0x00, 0x00, 0x04, 0x02, 0x01, 0x03, 0x04, 0x04, 0x03, 0x00, - 0x03, 0x04, 0x04, 0x04, 0x05, 0x03, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x06, 0x08, 0x10, 0x10, 0x00, 0x00, 0x00, 0x10, 0x10, 0x08, 0x06, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x04, 0x04, - 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x02, 0x02, 0x04, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x04, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x04, 0x72, 0x8A, 0xFA, 0x84, 0x78, 0x00, 0x00, 0xC0, 0x38, 0x06, 0x38, 0xC0, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x22, 0xE2, 0x00, 0x00, 0xFE, 0x20, 0x20, 0x20, 0x20, 0xFE, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0xFE, 0x40, 0xB0, 0x08, 0x04, 0x02, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xFE, 0x0C, 0x70, 0x80, 0x70, 0x0C, 0xFE, 0x00, 0xFE, 0x0C, 0x30, 0xC0, 0x00, 0xFE, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0xFE, 0x42, 0x42, 0x42, 0x22, 0x1C, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x42, 0x42, 0xA2, 0x1C, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x42, 0x42, 0x80, 0x00, 0x00, 0x02, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x02, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x06, 0x38, 0xC0, 0x00, 0xC0, 0x38, 0x06, 0x00, 0x3E, 0xC0, 0xF0, 0x0E, 0xF0, 0xC0, 0x3E, 0x00, 0x00, 0x06, 0x98, 0x60, 0x98, 0x06, 0x00, 0x00, 0x00, 0x06, 0x18, 0xE0, 0x18, 0x06, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, 0x06, 0x18, 0x60, 0x80, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x40, 0x30, 0x0C, 0x0C, 0x30, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, - 0x02, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x06, 0x01, 0x01, 0x01, 0x01, 0x01, 0x06, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x0C, 0x12, 0x11, 0x10, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, - 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x06, 0x01, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xFE, 0x00, 0x00, 0x00, 0xE0, 0x90, 0x90, 0x90, 0xE0, 0x00, 0x00, 0x00, 0x20, 0xFC, 0x22, 0x22, 0x22, 0x02, - 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x80, 0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0xF0, 0x20, 0x10, 0xF0, 0x00, 0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0x10, 0x70, 0x00, 0x00, 0x00, 0x60, 0x90, 0x90, 0x90, 0x20, 0x00, 0x00, 0x00, 0x20, 0x20, 0xFC, 0x20, 0x20, 0x20, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x70, 0x80, 0x00, 0x80, 0x70, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x30, 0xC0, 0x00, 0xF0, 0x00, 0x00, 0x30, 0xC0, 0xC0, 0x30, 0x00, 0x00, 0x00, 0x00, 0x30, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00, 0x00, 0x10, - 0x10, 0x90, 0x50, 0x30, 0x00, 0x00, 0x00, 0x80, 0x80, 0x7E, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x7E, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x24, 0x24, 0x22, 0x1F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00, 0x20, 0x20, 0x20, 0x20, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, - 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x3F, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x3F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x06, 0x01, 0x01, 0x06, 0x00, 0x00, 0x00, 0x20, 0x20, 0x31, 0x0E, 0x03, 0x00, 0x00, 0x00, 0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; diff --git a/drivers/sensors/adns5050.c b/drivers/sensors/adns5050.c index e7273977d5..254ef2ee87 100644 --- a/drivers/sensors/adns5050.c +++ b/drivers/sensors/adns5050.c @@ -17,7 +17,6 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ - #include "adns5050.h" #include "wait.h" #include "debug.h" @@ -61,13 +60,9 @@ void adns_sync(void) { writePinHigh(ADNS_CS_PIN); } -void adns_cs_select(void) { - writePinLow(ADNS_CS_PIN); -} +void adns_cs_select(void) { writePinLow(ADNS_CS_PIN); } -void adns_cs_deselect(void) { - writePinHigh(ADNS_CS_PIN); -} +void adns_cs_deselect(void) { writePinHigh(ADNS_CS_PIN); } uint8_t adns_serial_read(void) { setPinInput(ADNS_SDIO_PIN); @@ -121,7 +116,7 @@ uint8_t adns_read_reg(uint8_t reg_addr) { // We don't need a minimum tSRAD here. That's because a 4ms wait time is // already included in adns_serial_write(), so we're good. // See page 10 and 15 of the ADNS spec sheet. - //wait_us(4); + // wait_us(4); uint8_t byte = adns_serial_read(); @@ -138,7 +133,7 @@ uint8_t adns_read_reg(uint8_t reg_addr) { void adns_write_reg(uint8_t reg_addr, uint8_t data) { adns_cs_select(); - adns_serial_write( 0b10000000 | reg_addr ); + adns_serial_write(0b10000000 | reg_addr); adns_serial_write(data); adns_cs_deselect(); } @@ -155,7 +150,7 @@ report_adns_t adns_read_burst(void) { // We don't need a minimum tSRAD here. That's because a 4ms wait time is // already included in adns_serial_write(), so we're good. // See page 10 and 15 of the ADNS spec sheet. - //wait_us(4); + // wait_us(4); uint8_t x = adns_serial_read(); uint8_t y = adns_serial_read(); @@ -180,13 +175,11 @@ int8_t convert_twoscomp(uint8_t data) { } // Don't forget to use the definitions for CPI in the header file. -void adns_set_cpi(uint8_t cpi) { - adns_write_reg(REG_MOUSE_CONTROL2, cpi); -} +void adns_set_cpi(uint8_t cpi) { adns_write_reg(REG_MOUSE_CONTROL2, cpi); } bool adns_check_signature(void) { - uint8_t pid = adns_read_reg(REG_PRODUCT_ID); - uint8_t rid = adns_read_reg(REG_REVISION_ID); + uint8_t pid = adns_read_reg(REG_PRODUCT_ID); + uint8_t rid = adns_read_reg(REG_REVISION_ID); uint8_t pid2 = adns_read_reg(REG_PRODUCT_ID2); return (pid == 0x12 && rid == 0x01 && pid2 == 0x26); diff --git a/drivers/sensors/adns5050.h b/drivers/sensors/adns5050.h index ff8e8f78e9..5e9edc2962 100644 --- a/drivers/sensors/adns5050.h +++ b/drivers/sensors/adns5050.h @@ -67,13 +67,13 @@ typedef struct { // A bunch of functions to implement the ADNS5050-specific serial protocol. // Note that the "serial.h" driver is insufficient, because it does not // manually manipulate a serial clock signal. -void adns_init(void); -void adns_sync(void); -uint8_t adns_serial_read(void); -void adns_serial_write(uint8_t data); -uint8_t adns_read_reg(uint8_t reg_addr); -void adns_write_reg(uint8_t reg_addr, uint8_t data); +void adns_init(void); +void adns_sync(void); +uint8_t adns_serial_read(void); +void adns_serial_write(uint8_t data); +uint8_t adns_read_reg(uint8_t reg_addr); +void adns_write_reg(uint8_t reg_addr, uint8_t data); report_adns_t adns_read_burst(void); -int8_t convert_twoscomp(uint8_t data); -void adns_set_cpi(uint8_t cpi); -bool adns_check_signature(void); +int8_t convert_twoscomp(uint8_t data); +void adns_set_cpi(uint8_t cpi); +bool adns_check_signature(void); diff --git a/drivers/sensors/adns9800.c b/drivers/sensors/adns9800.c index 17966b81f9..b4f683452c 100644 --- a/drivers/sensors/adns9800.c +++ b/drivers/sensors/adns9800.c @@ -20,57 +20,57 @@ #include "adns9800.h" // registers -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Pixel_Sum 0x08 -#define REG_Maximum_Pixel 0x09 -#define REG_Minimum_Pixel 0x0a -#define REG_Shutter_Lower 0x0b -#define REG_Shutter_Upper 0x0c -#define REG_Frame_Period_Lower 0x0d -#define REG_Frame_Period_Upper 0x0e -#define REG_Configuration_I 0x0f -#define REG_Configuration_II 0x10 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate 0x15 -#define REG_Rest1_Downshift 0x16 -#define REG_Rest2_Rate 0x17 -#define REG_Rest2_Downshift 0x18 -#define REG_Rest3_Rate 0x19 -#define REG_Frame_Period_Max_Bound_Lower 0x1a -#define REG_Frame_Period_Max_Bound_Upper 0x1b -#define REG_Frame_Period_Min_Bound_Lower 0x1c -#define REG_Frame_Period_Min_Bound_Upper 0x1d -#define REG_Shutter_Max_Bound_Lower 0x1e -#define REG_Shutter_Max_Bound_Upper 0x1f -#define REG_LASER_CTRL0 0x20 -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_SROM_ID 0x2a -#define REG_Lift_Detection_Thr 0x2e -#define REG_Configuration_V 0x2f -#define REG_Configuration_IV 0x39 -#define REG_Power_Up_Reset 0x3a -#define REG_Shutdown 0x3b -#define REG_Inverse_Product_ID 0x3f -#define REG_Motion_Burst 0x50 -#define REG_SROM_Load_Burst 0x62 -#define REG_Pixel_Burst 0x64 +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Pixel_Sum 0x08 +#define REG_Maximum_Pixel 0x09 +#define REG_Minimum_Pixel 0x0a +#define REG_Shutter_Lower 0x0b +#define REG_Shutter_Upper 0x0c +#define REG_Frame_Period_Lower 0x0d +#define REG_Frame_Period_Upper 0x0e +#define REG_Configuration_I 0x0f +#define REG_Configuration_II 0x10 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate 0x15 +#define REG_Rest1_Downshift 0x16 +#define REG_Rest2_Rate 0x17 +#define REG_Rest2_Downshift 0x18 +#define REG_Rest3_Rate 0x19 +#define REG_Frame_Period_Max_Bound_Lower 0x1a +#define REG_Frame_Period_Max_Bound_Upper 0x1b +#define REG_Frame_Period_Min_Bound_Lower 0x1c +#define REG_Frame_Period_Min_Bound_Upper 0x1d +#define REG_Shutter_Max_Bound_Lower 0x1e +#define REG_Shutter_Max_Bound_Upper 0x1f +#define REG_LASER_CTRL0 0x20 +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_SROM_ID 0x2a +#define REG_Lift_Detection_Thr 0x2e +#define REG_Configuration_V 0x2f +#define REG_Configuration_IV 0x39 +#define REG_Power_Up_Reset 0x3a +#define REG_Shutdown 0x3b +#define REG_Inverse_Product_ID 0x3f +#define REG_Motion_Burst 0x50 +#define REG_SROM_Load_Burst 0x62 +#define REG_Pixel_Burst 0x64 #define ADNS_CLOCK_SPEED 2000000 #define MIN_CPI 200 #define MAX_CPI 8200 #define CPI_STEP 200 -#define CLAMP_CPI(value) value < MIN_CPI ? MIN_CPI : value > MAX_CPI ? MAX_CPI : value +#define CLAMP_CPI(value) value<MIN_CPI ? MIN_CPI : value> MAX_CPI ? MAX_CPI : value #define SPI_MODE 3 #define SPI_DIVISOR (F_CPU / ADNS_CLOCK_SPEED) #define US_BETWEEN_WRITES 120 @@ -80,12 +80,9 @@ extern const uint8_t firmware_data[]; -void adns_spi_start(void){ - spi_start(SPI_SS_PIN, false, SPI_MODE, SPI_DIVISOR); -} - -void adns_write(uint8_t reg_addr, uint8_t data){ +void adns_spi_start(void) { spi_start(SPI_SS_PIN, false, SPI_MODE, SPI_DIVISOR); } +void adns_write(uint8_t reg_addr, uint8_t data) { adns_spi_start(); spi_write(reg_addr | MSB1); spi_write(data); @@ -93,10 +90,9 @@ void adns_write(uint8_t reg_addr, uint8_t data){ wait_us(US_BETWEEN_WRITES); } -uint8_t adns_read(uint8_t reg_addr){ - +uint8_t adns_read(uint8_t reg_addr) { adns_spi_start(); - spi_write(reg_addr & 0x7f ); + spi_write(reg_addr & 0x7f); uint8_t data = spi_read(); spi_stop(); wait_us(US_BETWEEN_READS); @@ -105,7 +101,6 @@ uint8_t adns_read(uint8_t reg_addr){ } void adns_init() { - setPinOutput(SPI_SS_PIN); spi_init(); @@ -144,7 +139,7 @@ void adns_init() { // send all bytes of the firmware unsigned char c; - for(int i = 0; i < FIRMWARE_LENGTH; i++){ + for (int i = 0; i < FIRMWARE_LENGTH; i++) { c = (unsigned char)pgm_read_byte(firmware_data + i); spi_write(c); wait_us(15); @@ -161,7 +156,7 @@ void adns_init() { config_adns_t adns_get_config(void) { uint8_t config_1 = adns_read(REG_Configuration_I); - return (config_adns_t){ (config_1 & 0xFF) * CPI_STEP }; + return (config_adns_t){(config_1 & 0xFF) * CPI_STEP}; } void adns_set_config(config_adns_t config) { @@ -169,20 +164,17 @@ void adns_set_config(config_adns_t config) { adns_write(REG_Configuration_I, config_1); } -static int16_t convertDeltaToInt(uint8_t high, uint8_t low){ - +static int16_t convertDeltaToInt(uint8_t high, uint8_t low) { // join bytes into twos compliment uint16_t twos_comp = (high << 8) | low; // convert twos comp to int - if (twos_comp & 0x8000) - return -1 * (~twos_comp + 1); + if (twos_comp & 0x8000) return -1 * (~twos_comp + 1); return twos_comp; } report_adns_t adns_get_report(void) { - report_adns_t report = {0, 0}; adns_spi_start(); @@ -194,8 +186,7 @@ report_adns_t adns_get_report(void) { uint8_t motion = spi_read(); - if(motion & 0x80) { - + if (motion & 0x80) { // clear observation register spi_read(); diff --git a/drivers/sensors/adns9800.h b/drivers/sensors/adns9800.h index 2f50b8f1be..d19ded4012 100644 --- a/drivers/sensors/adns9800.h +++ b/drivers/sensors/adns9800.h @@ -28,8 +28,8 @@ typedef struct { int16_t y; } report_adns_t; -void adns_init(void); +void adns_init(void); config_adns_t adns_get_config(void); -void adns_set_config(config_adns_t); +void adns_set_config(config_adns_t); /* Reads and clears the current delta values on the ADNS sensor */ report_adns_t adns_get_report(void); diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c index 5463bfc594..79b653e452 100644 --- a/drivers/sensors/pmw3360.c +++ b/drivers/sensors/pmw3360.c @@ -23,55 +23,55 @@ #include "pmw3360_firmware.h" // Registers -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Raw_Data_Sum 0x08 -#define REG_Maximum_Raw_data 0x09 -#define REG_Minimum_Raw_data 0x0A -#define REG_Shutter_Lower 0x0B -#define REG_Shutter_Upper 0x0C -#define REG_Control 0x0D -#define REG_Config1 0x0F -#define REG_Config2 0x10 -#define REG_Angle_Tune 0x11 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate_Lower 0x15 -#define REG_Rest1_Rate_Upper 0x16 -#define REG_Rest1_Downshift 0x17 -#define REG_Rest2_Rate_Lower 0x18 -#define REG_Rest2_Rate_Upper 0x19 -#define REG_Rest2_Downshift 0x1A -#define REG_Rest3_Rate_Lower 0x1B -#define REG_Rest3_Rate_Upper 0x1C -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_Raw_Data_Dump 0x29 -#define REG_SROM_ID 0x2A -#define REG_Min_SQ_Run 0x2B -#define REG_Raw_Data_Threshold 0x2C -#define REG_Config5 0x2F -#define REG_Power_Up_Reset 0x3A -#define REG_Shutdown 0x3B -#define REG_Inverse_Product_ID 0x3F -#define REG_LiftCutoff_Tune3 0x41 -#define REG_Angle_Snap 0x42 -#define REG_LiftCutoff_Tune1 0x4A -#define REG_Motion_Burst 0x50 -#define REG_LiftCutoff_Tune_Timeout 0x58 +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Raw_Data_Sum 0x08 +#define REG_Maximum_Raw_data 0x09 +#define REG_Minimum_Raw_data 0x0A +#define REG_Shutter_Lower 0x0B +#define REG_Shutter_Upper 0x0C +#define REG_Control 0x0D +#define REG_Config1 0x0F +#define REG_Config2 0x10 +#define REG_Angle_Tune 0x11 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate_Lower 0x15 +#define REG_Rest1_Rate_Upper 0x16 +#define REG_Rest1_Downshift 0x17 +#define REG_Rest2_Rate_Lower 0x18 +#define REG_Rest2_Rate_Upper 0x19 +#define REG_Rest2_Downshift 0x1A +#define REG_Rest3_Rate_Lower 0x1B +#define REG_Rest3_Rate_Upper 0x1C +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_Raw_Data_Dump 0x29 +#define REG_SROM_ID 0x2A +#define REG_Min_SQ_Run 0x2B +#define REG_Raw_Data_Threshold 0x2C +#define REG_Config5 0x2F +#define REG_Power_Up_Reset 0x3A +#define REG_Shutdown 0x3B +#define REG_Inverse_Product_ID 0x3F +#define REG_LiftCutoff_Tune3 0x41 +#define REG_Angle_Snap 0x42 +#define REG_LiftCutoff_Tune1 0x4A +#define REG_Motion_Burst 0x50 +#define REG_LiftCutoff_Tune_Timeout 0x58 #define REG_LiftCutoff_Tune_Min_Length 0x5A -#define REG_SROM_Load_Burst 0x62 -#define REG_Lift_Config 0x63 -#define REG_Raw_Data_Burst 0x64 -#define REG_LiftCutoff_Tune2 0x65 +#define REG_SROM_Load_Burst 0x62 +#define REG_Lift_Config 0x63 +#define REG_Raw_Data_Burst 0x64 +#define REG_LiftCutoff_Tune2 0x65 bool _inBurst = false; diff --git a/drivers/sensors/pmw3360.h b/drivers/sensors/pmw3360.h index 124c62cf00..7429a6ba09 100644 --- a/drivers/sensors/pmw3360.h +++ b/drivers/sensors/pmw3360.h @@ -66,20 +66,17 @@ typedef struct { int8_t mdy; } report_pmw_t; - - -bool spi_start_adv(void); -void spi_stop_adv(void); +bool spi_start_adv(void); +void spi_stop_adv(void); spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data); -uint8_t spi_read_adv(uint8_t reg_addr); -bool pmw_spi_init(void); -void pmw_set_cpi(uint16_t cpi); -uint16_t pmw_get_cpi(void); -void pmw_upload_firmware(void); -bool pmw_check_signature(void); +uint8_t spi_read_adv(uint8_t reg_addr); +bool pmw_spi_init(void); +void pmw_set_cpi(uint16_t cpi); +uint16_t pmw_get_cpi(void); +void pmw_upload_firmware(void); +bool pmw_check_signature(void); report_pmw_t pmw_read_burst(void); - #define degToRad(angleInDegrees) ((angleInDegrees)*M_PI / 180.0) #define radToDeg(angleInRadians) ((angleInRadians)*180.0 / M_PI) #define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt))) diff --git a/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h b/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h deleted file mode 100644 index 0755ddf6c4..0000000000 --- a/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h +++ /dev/null @@ -1,105 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -static const I2CConfig i2ccfg = { - 400000 // clock speed (Hz); 400kHz max for IS31 -}; - -static const uint8_t led_mask[] = { - 0xFF, 0x00, /* C1-1 -> C1-16 */ - 0xFF, 0x00, /* C2-1 -> C2-16 */ - 0xFF, 0x00, /* C3-1 -> C3-16 */ - 0xFF, 0x00, /* C4-1 -> C4-16 */ - 0x3F, 0x00, /* C5-1 -> C5-16 */ - 0x00, 0x00, /* C6-1 -> C6-16 */ - 0x00, 0x00, /* C7-1 -> C7-16 */ - 0x00, 0x00, /* C8-1 -> C8-16 */ - 0x00, 0x00, /* C9-1 -> C9-16 */ -}; - -// The address of the LED -#define LA(c, r) (c + r * 16) -// Need to be an address that is not mapped, but inside the range of the controller matrix -#define NA LA(8, 8) - -// The numbers in the comments are the led numbers DXX on the PCB -// The mapping is taken from the schematic of left hand side -static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { - // 45 44 43 42 41 40 39 - {LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, - // 52 51 50 49 48 47 46 - {LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2)}, - // 58 57 56 55 54 53 N/A - {LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA}, - // 67 66 65 64 63 62 61 - {LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2)}, - // 76 75 74 73 72 60 59 - {LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0)}, - // N/A N/A N/A N/A N/A N/A 68 - {NA, NA, NA, NA, NA, NA, LA(5, 4)}, - // N/A N/A N/A N/A 71 70 69 - {NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0)}, -}; - -#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND -#define IS31_TIMEOUT 5000 - -static GFXINLINE void init_board(GDisplay* g) { - (void)g; - /* I2C pins */ - palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL - palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA - palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); - palClearPad(GPIOB, 16); - /* start I2C */ - i2cStart(&I2CD1, &i2ccfg); - // try high drive (from kiibohd) - I2CD1.i2c->C2 |= I2Cx_C2_HDRS; - // try glitch fixing (from kiibohd) - I2CD1.i2c->FLT = 4; -} - -static GFXINLINE void post_init_board(GDisplay* g) { (void)g; } - -static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { - (void)g; - return led_mask; -} - -static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) { - (void)g; - return led_mapping[y][x]; -} - -static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { - (void)g; - if (!shutdown) { - palSetPad(GPIOB, 16); - } else { - palClearPad(GPIOB, 16); - } -} - -static GFXINLINE void write_data(GDisplay* g, uint8_t* data, uint16_t length) { - (void)g; - i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/drivers/ugfx/gdisp/is31fl3731c/driver.mk b/drivers/ugfx/gdisp/is31fl3731c/driver.mk deleted file mode 100644 index a53131bf33..0000000000 --- a/drivers/ugfx/gdisp/is31fl3731c/driver.mk +++ /dev/null @@ -1,3 +0,0 @@ -GFXINC += drivers/ugfx/gdisp/is31fl3731c -GFXSRC += drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c -GDISP_DRIVER_LIST += GDISPVMT_IS31FL3731C_QMK diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c deleted file mode 100644 index 7188244022..0000000000 --- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c +++ /dev/null @@ -1,302 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "gfx.h" - -#if GFX_USE_GDISP - -# define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_QMK -# define GDISP_SCREEN_HEIGHT LED_HEIGHT -# define GDISP_SCREEN_WIDTH LED_WIDTH - -# include "gdisp_lld_config.h" -# include "src/gdisp/gdisp_driver.h" - -# include "board_is31fl3731c.h" - -// Can't include led_tables from here -extern const uint8_t CIE1931_CURVE[]; - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -# ifndef GDISP_INITIAL_CONTRAST -# define GDISP_INITIAL_CONTRAST 0 -# endif -# ifndef GDISP_INITIAL_BACKLIGHT -# define GDISP_INITIAL_BACKLIGHT 0 -# endif - -# define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER << 0) - -# define IS31_ADDR_DEFAULT 0x74 - -# define IS31_REG_CONFIG 0x00 -// bits in reg -# define IS31_REG_CONFIG_PICTUREMODE 0x00 -# define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 -# define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 -// D2:D0 bits are starting frame for autoplay mode - -# define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode - -# define IS31_REG_AUTOPLAYCTRL1 0x02 -// D6:D4 number of loops (000=infty) -// D2:D0 number of frames to be used - -# define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) - -# define IS31_REG_DISPLAYOPT 0x05 -# define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames -# define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 -// D2:D0 bits blink period time (*0.27s) - -# define IS31_REG_AUDIOSYNC 0x06 -# define IS31_REG_AUDIOSYNC_ENABLE 0x1 - -# define IS31_REG_FRAMESTATE 0x07 - -# define IS31_REG_BREATHCTRL1 0x08 -// D6:D4 fade out time (26ms*2^i) -// D2:D0 fade in time (26ms*2^i) - -# define IS31_REG_BREATHCTRL2 0x09 -# define IS31_REG_BREATHCTRL2_ENABLE 0x10 -// D2:D0 extinguish time (3.5ms*2^i) - -# define IS31_REG_SHUTDOWN 0x0A -# define IS31_REG_SHUTDOWN_OFF 0x0 -# define IS31_REG_SHUTDOWN_ON 0x1 - -# define IS31_REG_AGCCTRL 0x0B -# define IS31_REG_ADCRATE 0x0C - -# define IS31_COMMANDREGISTER 0xFD -# define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' -# define IS31_FUNCTIONREG_SIZE 0xD - -# define IS31_FRAME_SIZE 0xB4 - -# define IS31_PWM_REG 0x24 -# define IS31_PWM_SIZE 0x90 - -# define IS31_LED_MASK_SIZE 0x12 - -# define IS31 - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -typedef struct { - uint8_t write_buffer_offset; - uint8_t write_buffer[IS31_FRAME_SIZE]; - uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; - uint8_t page; -} __attribute__((__packed__)) PrivData; - -// Some common routines and macros -# define PRIV(g) ((PrivData *)g->priv) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -static GFXINLINE void write_page(GDisplay *g, uint8_t page) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = IS31_COMMANDREGISTER; - tx[1] = page; - write_data(g, tx, 2); -} - -static GFXINLINE void write_register(GDisplay *g, uint8_t page, uint8_t reg, uint8_t data) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = reg; - tx[1] = data; - write_page(g, page); - write_data(g, tx, 2); -} - -static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { - PRIV(g)->write_buffer_offset = offset; - write_page(g, page); - write_data(g, (uint8_t *)PRIV(g), length + 1); -} - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - __builtin_memset(PRIV(g), 0, sizeof(PrivData)); - PRIV(g)->page = 0; - - // Initialise the board interface - init_board(g); - gfxSleepMilliseconds(10); - - // zero function page, all registers (assuming full_page is all zeroes) - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - set_hardware_shutdown(g, false); - gfxSleepMilliseconds(10); - // software shutdown - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - // zero function page, all registers - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - gfxSleepMilliseconds(10); - - // zero all LED registers on all 8 pages, and enable the mask - __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); - for (uint8_t i = 0; i < 8; i++) { - write_ram(g, i, 0, IS31_FRAME_SIZE); - gfxSleepMilliseconds(1); - } - - // software shutdown disable (i.e. turn stuff on) - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - - // Finish Init - post_init_board(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -# if GDISP_HARDWARE_FLUSH -LLDSPEC void gdisp_lld_flush(GDisplay *g) { - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return; - - PRIV(g)->page++; - PRIV(g)->page %= 2; - // TODO: some smarter algorithm for this - // We should run only one physical page at a time - // This way we don't need to send so much data, and - // we could use slightly less memory - uint8_t *src = PRIV(g)->frame_buffer; - for (int y = 0; y < GDISP_SCREEN_HEIGHT; y++) { - for (int x = 0; x < GDISP_SCREEN_WIDTH; x++) { - uint8_t val = (uint16_t)*src * g->g.Backlight / 100; - PRIV(g)->write_buffer[get_led_address(g, x, y)] = CIE1931_CURVE[val]; - ++src; - } - } - write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); - gfxSleepMilliseconds(1); - write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; -} -# endif - -# if GDISP_HARDWARE_DRAWPIXEL -LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch (g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH - 1 - g->p.x; - y = g->p.y; - break; - } - PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); - g->flags |= GDISP_FLG_NEEDFLUSH; -} -# endif - -# if GDISP_HARDWARE_PIXELREAD -LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch (g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH - 1 - g->p.x; - y = g->p.y; - break; - } - return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); -} -# endif - -# if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL -LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch (g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) return; - switch ((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - break; - case powerOn: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) return; - switch ((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_BACKLIGHT: - if (g->g.Backlight == (unsigned)g->p.ptr) return; - unsigned val = (unsigned)g->p.ptr; - g->g.Backlight = val > 100 ? 100 : val; - g->flags |= GDISP_FLG_NEEDFLUSH; - return; - } -} -# endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h deleted file mode 100644 index 403c6b0409..0000000000 --- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h +++ /dev/null @@ -1,36 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -# define GDISP_HARDWARE_FLUSH GFXON // This controller requires flushing -# define GDISP_HARDWARE_DRAWPIXEL GFXON -# define GDISP_HARDWARE_PIXELREAD GFXON -# define GDISP_HARDWARE_CONTROL GFXON - -# define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/drivers/ugfx/gdisp/st7565/board_st7565_template.h b/drivers/ugfx/gdisp/st7565/board_st7565_template.h deleted file mode 100644 index 875ed9e65c..0000000000 --- a/drivers/ugfx/gdisp/st7565/board_st7565_template.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -#include "quantum.h" - -#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 -#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC -#define ST7565_PAGE_ORDER 0, 1, 2, 3 -/* - * Custom page order for several LCD boards, e.g. HEM12864-99 - * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 - */ - -#define ST7565_A0_PIN C7 -#define ST7565_RST_PIN C8 -#define ST7565_MOSI_PIN C6 -#define ST7565_SCLK_PIN C5 -#define ST7565_SS_PIN C4 - -// DSPI Clock and Transfer Attributes -// Frame Size: 8 bits -// MSB First -// CLK Low by default -static const SPIConfig spi1config = { - // Operation complete callback or @p NULL. - .end_cb = NULL, - // The chip select line port - when not using pcs. - .ssport = PAL_PORT(ST7565_SS_PIN), - // brief The chip select line pad number - when not using pcs. - .sspad = PAL_PAD(ST7565_SS_PIN), - // SPI initialization data. - .tar0 = SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes - | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns - | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns - | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns - | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2 - | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns -}; - -static GFXINLINE void acquire_bus(GDisplay *g) { - (void)g; - // Only the LCD is using the SPI bus, so no need to acquire - // spiAcquireBus(&SPID1); - spiSelect(&SPID1); -} - -static GFXINLINE void release_bus(GDisplay *g) { - (void)g; - // Only the LCD is using the SPI bus, so no need to release - // spiReleaseBus(&SPID1); - spiUnselect(&SPID1); -} - -static GFXINLINE void init_board(GDisplay *g) { - (void)g; - setPinOutput(ST7565_A0_PIN); - writePinHigh(ST7565_A0_PIN); - setPinOutput(ST7565_RST_PIN); - writePinHigh(ST7565_RST_PIN); - setPinOutput(ST7565_SS_PIN); - - palSetPadMode(PAL_PORT(ST7565_MOSI_PIN), PAL_PAD(ST7565_MOSI_PIN), PAL_MODE_ALTERNATIVE_2); - palSetPadMode(PAL_PORT(ST7565_SCLK_PIN), PAL_PAD(ST7565_SCLK_PIN), PAL_MODE_ALTERNATIVE_2); - - spiInit(); - spiStart(&SPID1, &spi1config); - release_bus(g); -} - -static GFXINLINE void post_init_board(GDisplay *g) { (void)g; } - -static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { - (void)g; - writePin(ST7565_RST_PIN, !state); -} - -static GFXINLINE void write_cmd(GDisplay *g, gU8 cmd) { - (void)g; - writePinLow(ST7565_A0_PIN); - spiSend(&SPID1, 1, &cmd); -} - -static GFXINLINE void write_data(GDisplay *g, gU8 *data, gU16 length) { - (void)g; - writePinHigh(ST7565_A0_PIN); - spiSend(&SPID1, length, data); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/drivers/ugfx/gdisp/st7565/driver.mk b/drivers/ugfx/gdisp/st7565/driver.mk deleted file mode 100644 index 799a986b0a..0000000000 --- a/drivers/ugfx/gdisp/st7565/driver.mk +++ /dev/null @@ -1,3 +0,0 @@ -GFXINC += drivers/ugfx/gdisp/st7565 -GFXSRC += drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c -GDISP_DRIVER_LIST += GDISPVMT_ST7565_QMK diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c deleted file mode 100644 index f586f97e38..0000000000 --- a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c +++ /dev/null @@ -1,314 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#include "gfx.h" - -#if GFX_USE_GDISP - -# define GDISP_DRIVER_VMT GDISPVMT_ST7565_QMK -# include "gdisp_lld_config.h" -# include "src/gdisp/gdisp_driver.h" - -# include "board_st7565.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -# ifndef GDISP_SCREEN_HEIGHT -# define GDISP_SCREEN_HEIGHT LCD_HEIGHT -# endif -# ifndef GDISP_SCREEN_WIDTH -# define GDISP_SCREEN_WIDTH LCD_WIDTH -# endif -# ifndef GDISP_INITIAL_CONTRAST -# define GDISP_INITIAL_CONTRAST 35 -# endif -# ifndef GDISP_INITIAL_BACKLIGHT -# define GDISP_INITIAL_BACKLIGHT 100 -# endif - -# define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER << 0) - -# include "st7565.h" - -/*===========================================================================*/ -/* Driver config defaults for backward compatibility. */ -/*===========================================================================*/ -# ifndef ST7565_LCD_BIAS -# define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 -# endif -# ifndef ST7565_ADC -# define ST7565_ADC ST7565_ADC_NORMAL -# endif -# ifndef ST7565_COM_SCAN -# define ST7565_COM_SCAN ST7565_COM_SCAN_INC -# endif -# ifndef ST7565_PAGE_ORDER -# define ST7565_PAGE_ORDER 0, 1, 2, 3, 4, 5, 6, 7 -# endif - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -// Some common routines and macros -# define RAM(g) ((gU8 *)g->priv) -# define write_cmd2(g, cmd1, cmd2) \ - { \ - write_cmd(g, cmd1); \ - write_cmd(g, cmd2); \ - } -# define write_cmd3(g, cmd1, cmd2, cmd3) \ - { \ - write_cmd(g, cmd1); \ - write_cmd(g, cmd2); \ - write_cmd(g, cmd3); \ - } - -// Some common routines and macros -# define delay(us) gfxSleepMicroseconds(us) -# define delay_ms(ms) gfxSleepMilliseconds(ms) - -# define xyaddr(x, y) ((x) + ((y) >> 3) * GDISP_SCREEN_WIDTH) -# define xybit(y) (1 << ((y)&7)) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/* - * As this controller can't update on a pixel boundary we need to maintain the - * the entire display surface in memory so that we can do the necessary bit - * operations. Fortunately it is a small display in monochrome. - * 64 * 128 / 8 = 1024 bytes. - */ - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8); - if (!g->priv) { - return gFalse; - } - - // Initialise the board interface - init_board(g); - - // Hardware reset - setpin_reset(g, TRUE); - gfxSleepMilliseconds(20); - setpin_reset(g, FALSE); - gfxSleepMilliseconds(20); - acquire_bus(g); - - write_cmd(g, ST7565_LCD_BIAS); - write_cmd(g, ST7565_ADC); - write_cmd(g, ST7565_COM_SCAN); - - write_cmd(g, ST7565_START_LINE | 0); - - write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST * 64 / 101); - write_cmd(g, ST7565_RESISTOR_RATIO | 0x1); - - // turn on voltage converter (VC=1, VR=0, VF=0) - write_cmd(g, ST7565_POWER_CONTROL | 0x04); - delay_ms(50); - - // turn on voltage regulator (VC=1, VR=1, VF=0) - write_cmd(g, ST7565_POWER_CONTROL | 0x06); - delay_ms(50); - - // turn on voltage follower (VC=1, VR=1, VF=1) - write_cmd(g, ST7565_POWER_CONTROL | 0x07); - delay_ms(50); - - write_cmd(g, ST7565_DISPLAY_ON); - write_cmd(g, ST7565_ALLON_NORMAL); - write_cmd(g, ST7565_INVERT_DISPLAY); // Disable Inversion of display. - - write_cmd(g, ST7565_RMW); - - // Finish Init - post_init_board(g); - - // Release the bus - release_bus(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -# if GDISP_HARDWARE_FLUSH -LLDSPEC void gdisp_lld_flush(GDisplay *g) { - unsigned p; - - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return; - - acquire_bus(g); - gU8 pagemap[] = {ST7565_PAGE_ORDER}; - for (p = 0; p < sizeof(pagemap); p++) { - write_cmd(g, ST7565_PAGE | pagemap[p]); - write_cmd(g, ST7565_COLUMN_MSB | 0); - write_cmd(g, ST7565_COLUMN_LSB | 0); - write_cmd(g, ST7565_RMW); - write_data(g, RAM(g) + (p * GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); - } - release_bus(g); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; -} -# endif - -# if GDISP_HARDWARE_DRAWPIXEL -LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch (g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT - 1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH - 1 - g->p.x; - y = GDISP_SCREEN_HEIGHT - 1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT - 1 - g->p.y; - y = g->p.x; - break; - } - if (gdispColor2Native(g->p.color) != Black) - RAM(g)[xyaddr(x, y)] |= xybit(y); - else - RAM(g)[xyaddr(x, y)] &= ~xybit(y); - g->flags |= GDISP_FLG_NEEDFLUSH; -} -# endif - -# if GDISP_HARDWARE_PIXELREAD -LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch (g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT - 1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH - 1 - g->p.x; - y = GDISP_SCREEN_HEIGHT - 1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT - 1 - g->p.y; - y = g->p.x; - break; - } - return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; -} -# endif - -# if GDISP_HARDWARE_BITFILLS -LLDSPEC void gdisp_lld_blit_area(GDisplay *g) { - uint8_t *buffer = (uint8_t *)g->p.ptr; - int linelength = g->p.cx; - for (int i = 0; i < g->p.cy; i++) { - unsigned dstx = g->p.x; - unsigned dsty = g->p.y + i; - unsigned srcx = g->p.x1; - unsigned srcy = g->p.y1 + i; - unsigned srcbit = srcy * g->p.x2 + srcx; - for (int j = 0; j < linelength; j++) { - uint8_t src = buffer[srcbit / 8]; - uint8_t bit = 7 - (srcbit % 8); - uint8_t bitset = (src >> bit) & 1; - uint8_t *dst = &(RAM(g)[xyaddr(dstx, dsty)]); - if (bitset) { - *dst |= xybit(dsty); - } else { - *dst &= ~xybit(dsty); - } - dstx++; - srcbit++; - } - } - g->flags |= GDISP_FLG_NEEDFLUSH; -} -# endif - -# if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL -LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch (g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) return; - switch ((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - acquire_bus(g); - write_cmd(g, ST7565_DISPLAY_OFF); - release_bus(g); - break; - case powerOn: - acquire_bus(g); - write_cmd(g, ST7565_DISPLAY_ON); - release_bus(g); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) return; - switch ((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_CONTRAST: - if ((unsigned)g->p.ptr > 100) g->p.ptr = (void *)100; - acquire_bus(g); - write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr) << 6) / 101) & 0x3F); - release_bus(g); - g->g.Contrast = (unsigned)g->p.ptr; - return; - } -} -# endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h deleted file mode 100644 index 6052058ec2..0000000000 --- a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -# define GDISP_HARDWARE_FLUSH GFXON // This controller requires flushing -# define GDISP_HARDWARE_DRAWPIXEL GFXON -# define GDISP_HARDWARE_PIXELREAD GFXON -# define GDISP_HARDWARE_CONTROL GFXON -# define GDISP_HARDWARE_BITFILLS GFXON - -# define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/drivers/ugfx/gdisp/st7565/st7565.h b/drivers/ugfx/gdisp/st7565/st7565.h deleted file mode 100644 index 3c77a88569..0000000000 --- a/drivers/ugfx/gdisp/st7565/st7565.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _ST7565_H -#define _ST7565_H - -#define ST7565_CONTRAST 0x81 -#define ST7565_ALLON_NORMAL 0xA4 -#define ST7565_ALLON 0xA5 -#define ST7565_POSITIVE_DISPLAY 0xA6 -#define ST7565_INVERT_DISPLAY 0xA7 -#define ST7565_DISPLAY_OFF 0xAE -#define ST7565_DISPLAY_ON 0xAF - -#define ST7565_LCD_BIAS_7 0xA3 -#define ST7565_LCD_BIAS_9 0xA2 - -#define ST7565_ADC_NORMAL 0xA0 -#define ST7565_ADC_REVERSE 0xA1 - -#define ST7565_COM_SCAN_INC 0xC0 -#define ST7565_COM_SCAN_DEC 0xC8 - -#define ST7565_START_LINE 0x40 -#define ST7565_PAGE 0xB0 -#define ST7565_COLUMN_MSB 0x10 -#define ST7565_COLUMN_LSB 0x00 -#define ST7565_RMW 0xE0 - -#define ST7565_RESISTOR_RATIO 0x20 -#define ST7565_POWER_CONTROL 0x28 - -#define ST7565_RESET 0xE2 - -#endif /* _ST7565_H */ diff --git a/drivers/usb2422.c b/drivers/usb2422.c new file mode 100644 index 0000000000..62b919093b --- /dev/null +++ b/drivers/usb2422.c @@ -0,0 +1,402 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <string.h> +#include "usb2422.h" +#include "i2c_master.h" +#include "wait.h" +#include "gpio.h" + +/* -------- USB2422_VID : (USB2422L Offset: 0x00) (R/W 16) Vendor ID -------- */ +typedef union { + struct { + uint16_t VID_LSB : 8; + uint16_t VID_MSB : 8; + } bit; /*!< Structure used for bit access */ + uint16_t reg; /*!< Type used for register access */ +} USB2422_VID_Type; + +/* -------- USB2422_PID : (USB2422L Offset: 0x02) (R/W 16) Product ID -------- */ +typedef union { + struct { + uint16_t PID_LSB : 8; + uint16_t PID_MSB : 8; + } bit; /*!< Structure used for bit access */ + uint16_t reg; /*!< Type used for register access */ +} USB2422_PID_Type; + +/* -------- USB2422_DID : (USB2422L Offset: 0x04) (R/W 16) Device ID -------- */ +typedef union { + struct { + uint16_t DID_LSB : 8; + uint16_t DID_MSB : 8; + } bit; /*!< Structure used for bit access */ + uint16_t reg; /*!< Type used for register access */ +} USB2422_DID_Type; + +/* -------- USB2422_CFG1 : (USB2422L Offset: 0x06) (R/W 8) Configuration Data Byte 1-------- */ +typedef union { + struct { + uint8_t PORT_PWR : 1; + uint8_t CURRENT_SNS : 2; + uint8_t EOP_DISABLE : 1; + uint8_t MTT_ENABLE : 1; + uint8_t HS_DISABLE : 1; + uint8_t : 1; + uint8_t SELF_BUS_PWR : 1; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_CFG1_Type; + +/* -------- USB2422_CFG2 : (USB2422L Offset: 0x07) (R/W 8) Configuration Data Byte 2-------- */ +typedef union { + struct { + uint8_t : 3; + uint8_t COMPOUND : 1; + uint8_t OC_TIMER : 2; + uint8_t : 1; + uint8_t DYNAMIC : 1; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_CFG2_Type; + +/* -------- USB2422_CFG3 : (USB2422L Offset: 0x08) (R/W 16) Configuration Data Byte 3-------- */ +typedef union { + struct { + uint8_t STRING_EN : 1; + uint8_t : 2; + uint8_t PRTMAP_EN : 1; + uint8_t : 4; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_CFG3_Type; + +/* -------- USB2422_NRD : (USB2422L Offset: 0x09) (R/W 8) Non Removable Device -------- */ +typedef union { + struct { + uint8_t : 5; + uint8_t PORT2_NR : 1; + uint8_t PORT1_NR : 1; + uint8_t : 1; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_NRD_Type; + +/* -------- USB2422_PDS : (USB2422L Offset: 0x0A) (R/W 8) Port Diable for Self-Powered Operation -------- */ +typedef union { + struct { + uint8_t : 1; + uint8_t PORT1_DIS : 1; + uint8_t PORT2_DIS : 1; + uint8_t : 5; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_PDS_Type; + +/* -------- USB2422_PDB : (USB2422L Offset: 0x0B) (R/W 8) Port Diable for Bus-Powered Operation -------- */ + +typedef union { + struct { + uint8_t : 1; + uint8_t PORT1_DIS : 1; + uint8_t PORT2_DIS : 1; + uint8_t : 5; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_PDB_Type; + +/* -------- USB2422_MAXPS : (USB2422L Offset: 0x0C) (R/W 8) Max Power for Self-Powered Operation -------- */ +typedef union { + struct { + uint8_t MAX_PWR_SP : 8; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_MAXPS_Type; + +/* -------- USB2422_MAXPB : (USB2422L Offset: 0x0D) (R/W 8) Max Power for Bus-Powered Operation -------- */ +typedef union { + struct { + uint8_t MAX_PWR_BP : 8; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_MAXPB_Type; + +/* -------- USB2422_HCMCS : (USB2422L Offset: 0x0E) (R/W 8) Hub Controller Max Current for Self-Powered Operation -------- */ +typedef union { + struct { + uint8_t HC_MAX_C_SP : 8; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_HCMCS_Type; + +/* -------- USB2422_HCMCB : (USB2422L Offset: 0x0F) (R/W 8) Hub Controller Max Current for Bus-Powered Operation -------- */ +typedef union { + struct { + uint8_t HC_MAX_C_BP : 8; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_HCMCB_Type; + +/* -------- USB2422_PWRT : (USB2422L Offset: 0x10) (R/W 8) Power On Time -------- */ +typedef union { + struct { + uint8_t POWER_ON_TIME : 8; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_PWRT_Type; + +/* -------- USB2422_LANGID LSB : (USB2422L Offset: 0x11) (R/W 16) Language ID -------- */ +typedef union { + struct { + uint8_t LANGID_LSB : 8; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_LANGID_LSB_Type; + +/* -------- USB2422_LANGID MSB : (USB2422L Offset: 0x12) (R/W 16) Language ID -------- */ +typedef union { + struct { + uint8_t LANGID_MSB : 8; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_LANGID_MSB_Type; + +/* -------- USB2422_MFRSL : (USB2422L Offset: 0x13) (R/W 8) Manufacturer String Length -------- */ +typedef union { + struct { + uint8_t MFR_STR_LEN : 8; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_MFRSL_Type; + +/* -------- USB2422_PRDSL : (USB2422L Offset: 0x14) (R/W 8) Product String Length -------- */ +typedef union { + struct { + uint8_t PRD_STR_LEN : 8; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_PRDSL_Type; + +/* -------- USB2422_SERSL : (USB2422L Offset: 0x15) (R/W 8) Serial String Length -------- */ +typedef union { + struct { + uint8_t SER_STR_LEN : 8; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_SERSL_Type; + +/* -------- USB2422_MFRSTR : (USB2422L Offset: 0x16-53) (R/W 8) Maufacturer String -------- */ +typedef uint16_t USB2422_MFRSTR_Type; + +/* -------- USB2422_PRDSTR : (USB2422L Offset: 0x54-91) (R/W 8) Product String -------- */ +typedef uint16_t USB2422_PRDSTR_Type; + +/* -------- USB2422_SERSTR : (USB2422L Offset: 0x92-CF) (R/W 8) Serial String -------- */ +typedef uint16_t USB2422_SERSTR_Type; + +/* -------- USB2422_BCEN : (USB2422L Offset: 0xD0) (R/W 8) Battery Charging Enable -------- */ + +typedef union { + struct { + uint8_t : 1; + uint8_t PORT1_BCE : 1; + uint8_t PORT2_BCE : 1; + uint8_t : 5; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_BCEN_Type; + +/* -------- USB2422_BOOSTUP : (USB2422L Offset: 0xF6) (R/W 8) Boost Upstream -------- */ +typedef union { + struct { + uint8_t BOOST : 2; + uint8_t : 6; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_BOOSTUP_Type; + +/* -------- USB2422_BOOSTDOWN : (USB2422L Offset: 0xF8) (R/W 8) Boost Downstream -------- */ +typedef union { + struct { + uint8_t BOOST1 : 2; + uint8_t BOOST2 : 2; + uint8_t : 4; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_BOOSTDOWN_Type; + +/* -------- USB2422_PRTSP : (USB2422L Offset: 0xFA) (R/W 8) Port Swap -------- */ +typedef union { + struct { + uint8_t : 1; + uint8_t PORT1_SP : 1; + uint8_t PORT2_SP : 1; + uint8_t : 5; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_PRTSP_Type; + +/* -------- USB2422_PRTR12 : (USB2422L Offset: 0xFB) (R/W 8) Port 1/2 Remap -------- */ +typedef union { + struct { + uint8_t PORT1_REMAP : 4; + uint8_t PORT2_REMAP : 4; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_PRTR12_Type; + +#define USB2422_PRTR12_DISABLE 0 +#define USB2422_PRT12_P2TOL1 1 +#define USB2422_PRT12_P2XTOL2 2 +#define USB2422_PRT12_P1TOL1 1 +#define USB2422_PRT12_P1XTOL2 2 + +/* -------- USB2422_STCD : (USB2422L Offset: 0xFF) (R/W 8) Status Command -------- */ +typedef union { + struct { + uint8_t USB_ATTACH : 1; + uint8_t RESET : 1; + uint8_t INTF_PWRDN : 1; + uint8_t : 5; + } bit; /*!< Structure used for bit access */ + uint8_t reg; /*!< Type used for register access */ +} USB2422_STCD_Type; + +/** \brief USB2422 device hardware registers */ +typedef struct { + USB2422_VID_Type VID; /**< \brief Offset: 0x00*/ + USB2422_PID_Type PID; /**< \brief Offset: 0x02*/ + USB2422_DID_Type DID; /**< \brief Offset: 0x04*/ + USB2422_CFG1_Type CFG1; /**< \brief Offset: 0x06*/ + USB2422_CFG2_Type CFG2; /**< \brief Offset: 0x07*/ + USB2422_CFG3_Type CFG3; /**< \brief Offset: 0x08*/ + USB2422_NRD_Type NRD; /**< \brief Offset: 0x09*/ + USB2422_PDS_Type PDS; /**< \brief Offset: 0x0A*/ + USB2422_PDB_Type PDB; /**< \brief Offset: 0x0B*/ + USB2422_MAXPS_Type MAXPS; /**< \brief Offset: 0x0C*/ + USB2422_MAXPB_Type MAXPB; /**< \brief Offset: 0x0D*/ + USB2422_HCMCS_Type HCMCS; /**< \brief Offset: 0x0E*/ + USB2422_HCMCB_Type HCMCB; /**< \brief Offset: 0x0F*/ + USB2422_PWRT_Type PWRT; /**< \brief Offset: 0x10*/ + USB2422_LANGID_LSB_Type LANGID_LSB; /**< \brief Offset: 0x11*/ + USB2422_LANGID_MSB_Type LANGID_MSB; /**< \brief Offset: 0x12*/ + USB2422_MFRSL_Type MFRSL; /**< \brief Offset: 0x13*/ + USB2422_PRDSL_Type PRDSL; /**< \brief Offset: 0x14*/ + USB2422_SERSL_Type SERSL; /**< \brief Offset: 0x15*/ + USB2422_MFRSTR_Type MFRSTR[31]; /**< \brief Offset: 0x16*/ + USB2422_PRDSTR_Type PRDSTR[31]; /**< \brief Offset: 0x54*/ + USB2422_SERSTR_Type SERSTR[31]; /**< \brief Offset: 0x92*/ + USB2422_BCEN_Type BCEN; /**< \brief Offset: 0xD0*/ + uint8_t Reserved1[0x25]; + USB2422_BOOSTUP_Type BOOSTUP; /**< \brief Offset: 0xF6*/ + uint8_t Reserved2[0x1]; + USB2422_BOOSTDOWN_Type BOOSTDOWN; /**< \brief Offset: 0xF8*/ + uint8_t Reserved3[0x1]; + USB2422_PRTSP_Type PRTSP; /**< \brief Offset: 0xFA*/ + USB2422_PRTR12_Type PRTR12; /**< \brief Offset: 0xFB*/ + uint8_t Reserved4[0x3]; + USB2422_STCD_Type STCD; /**< \brief Offset: 0xFF*/ +} Usb2422_t; + +// *************************************************************** + +static Usb2422_t config; + +// *************************************************************** + +/** \brief Handle the conversion to allow simple strings + */ +static void USB2422_strcpy(const char* str, USB2422_MFRSTR_Type* dest, uint8_t len) { + for (uint8_t i = 0; i < len; i++) { + dest[i] = str[i]; + } +} + +/** \brief Handle the conversion to allow simple strings + */ +static void USB2422_write_block(void) { + static unsigned char i2c0_buf[34]; + + unsigned char* dest = i2c0_buf; + unsigned char* src; + unsigned char* base = (unsigned char*)&config; + + for (src = base; src < base + 256; src += 32) { + dest[0] = src - base; + dest[1] = 32; + memcpy(&dest[2], src, 32); + i2c_transmit(USB2422_ADDRESS, dest, 34, 50000); + wait_us(100); + } +} + +// *************************************************************** + +void USB2422_init() { +#ifdef USB2422_RESET_PIN + setPinOutput(USB2422_RESET_PIN); +#endif +#ifdef USB2422_ACTIVE_PIN + setPinInput(USB2422_ACTIVE_PIN); +#endif + + i2c_init(); // IC2 clk must be high at USB2422 reset release time to signal SMB configuration +} + +void USB2422_configure() { + static const char SERNAME[] = "Unavailable"; + + memset(&config, 0, sizeof(Usb2422_t)); + + // configure Usb2422 registers + config.VID.reg = USB2422_VENDOR_ID; + config.PID.reg = USB2422_PRODUCT_ID; + config.DID.reg = USB2422_DEVICE_VER; // BCD format, eg 01.01 + config.CFG1.bit.SELF_BUS_PWR = 1; // self powered for now + config.CFG1.bit.HS_DISABLE = 1; // full or high speed + // config.CFG2.bit.COMPOUND = 0; // compound device + config.CFG3.bit.STRING_EN = 1; // strings enabled + // config.NRD.bit.PORT2_NR = 0; // MCU is non-removable + config.MAXPB.reg = 20; // 0mA + config.HCMCB.reg = 20; // 0mA + config.MFRSL.reg = sizeof(USB2422_MANUFACTURER); + config.PRDSL.reg = sizeof(USB2422_PRODUCT); + config.SERSL.reg = sizeof(SERNAME); + USB2422_strcpy(USB2422_MANUFACTURER, config.MFRSTR, sizeof(USB2422_MANUFACTURER)); + USB2422_strcpy(USB2422_PRODUCT, config.PRDSTR, sizeof(USB2422_PRODUCT)); + USB2422_strcpy(SERNAME, config.SERSTR, sizeof(SERNAME)); + // config.BOOSTUP.bit.BOOST=3; //upstream port + // config.BOOSTDOWN.bit.BOOST1=0; // extra port + // config.BOOSTDOWN.bit.BOOST2=2; //MCU is close + config.STCD.bit.USB_ATTACH = 1; + + USB2422_write_block(); +} + +void USB2422_reset() { +#ifdef USB2422_RESET_PIN + writePinLow(USB2422_RESET_PIN); + wait_us(2); + writePinHigh(USB2422_RESET_PIN); +#endif +} + +bool USB2422_active() { +#ifdef USB2422_ACTIVE_PIN + return readPin(USB2422_ACTIVE_PIN); +#else + return 1; +#endif +} diff --git a/drivers/usb2422.h b/drivers/usb2422.h new file mode 100644 index 0000000000..2e435b02bc --- /dev/null +++ b/drivers/usb2422.h @@ -0,0 +1,59 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include <stdbool.h> + +#ifndef USB2422_ADDRESS +# define USB2422_ADDRESS 0x58 +#endif + +#ifndef USB2422_VENDOR_ID +# define USB2422_VENDOR_ID 0xFEED +#endif +#ifndef USB2422_PRODUCT_ID +# define USB2422_PRODUCT_ID 0x0001 +#endif +#ifndef USB2422_DEVICE_VER +# define USB2422_DEVICE_VER 0x0001 +#endif + +#ifndef USB2422_MANUFACTURER +# define USB2422_MANUFACTURER "QMK" +#endif +#ifndef USB2422_PRODUCT +# define USB2422_PRODUCT "QMK Hub" +#endif + +/** \brief Initialises the dependent subsystems */ +void USB2422_init(void); + +/** \brief Push configuration to the USB2422 device */ +void USB2422_configure(void); + +/** \brief Reset the chip (RESET_N) + * + * NOTE: + * Depends on a valid USB2422_RESET_PIN configuration + */ +void USB2422_reset(void); + +/** \brief Indicates the USB state of the hub (SUSP_IND) + * + * NOTE: + * Depends on a valid USB2422_ACTIVE_PIN configuration + */ +bool USB2422_active(void); |