summaryrefslogtreecommitdiff
path: root/drivers/ugfx/gdisp/st7565
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ugfx/gdisp/st7565')
-rw-r--r--drivers/ugfx/gdisp/st7565/board_st7565_template.h96
-rw-r--r--drivers/ugfx/gdisp/st7565/driver.mk3
-rw-r--r--drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c314
-rw-r--r--drivers/ugfx/gdisp/st7565/gdisp_lld_config.h27
-rw-r--r--drivers/ugfx/gdisp/st7565/st7565.h39
5 files changed, 0 insertions, 479 deletions
diff --git a/drivers/ugfx/gdisp/st7565/board_st7565_template.h b/drivers/ugfx/gdisp/st7565/board_st7565_template.h
deleted file mode 100644
index 875ed9e65c..0000000000
--- a/drivers/ugfx/gdisp/st7565/board_st7565_template.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-#include "quantum.h"
-
-#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
-#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER 0, 1, 2, 3
-/*
- * Custom page order for several LCD boards, e.g. HEM12864-99
- * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3
- */
-
-#define ST7565_A0_PIN C7
-#define ST7565_RST_PIN C8
-#define ST7565_MOSI_PIN C6
-#define ST7565_SCLK_PIN C5
-#define ST7565_SS_PIN C4
-
-// DSPI Clock and Transfer Attributes
-// Frame Size: 8 bits
-// MSB First
-// CLK Low by default
-static const SPIConfig spi1config = {
- // Operation complete callback or @p NULL.
- .end_cb = NULL,
- // The chip select line port - when not using pcs.
- .ssport = PAL_PORT(ST7565_SS_PIN),
- // brief The chip select line pad number - when not using pcs.
- .sspad = PAL_PAD(ST7565_SS_PIN),
- // SPI initialization data.
- .tar0 = SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
- | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
- | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
- | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
- | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
- | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
-};
-
-static GFXINLINE void acquire_bus(GDisplay *g) {
- (void)g;
- // Only the LCD is using the SPI bus, so no need to acquire
- // spiAcquireBus(&SPID1);
- spiSelect(&SPID1);
-}
-
-static GFXINLINE void release_bus(GDisplay *g) {
- (void)g;
- // Only the LCD is using the SPI bus, so no need to release
- // spiReleaseBus(&SPID1);
- spiUnselect(&SPID1);
-}
-
-static GFXINLINE void init_board(GDisplay *g) {
- (void)g;
- setPinOutput(ST7565_A0_PIN);
- writePinHigh(ST7565_A0_PIN);
- setPinOutput(ST7565_RST_PIN);
- writePinHigh(ST7565_RST_PIN);
- setPinOutput(ST7565_SS_PIN);
-
- palSetPadMode(PAL_PORT(ST7565_MOSI_PIN), PAL_PAD(ST7565_MOSI_PIN), PAL_MODE_ALTERNATIVE_2);
- palSetPadMode(PAL_PORT(ST7565_SCLK_PIN), PAL_PAD(ST7565_SCLK_PIN), PAL_MODE_ALTERNATIVE_2);
-
- spiInit();
- spiStart(&SPID1, &spi1config);
- release_bus(g);
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) { (void)g; }
-
-static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
- (void)g;
- writePin(ST7565_RST_PIN, !state);
-}
-
-static GFXINLINE void write_cmd(GDisplay *g, gU8 cmd) {
- (void)g;
- writePinLow(ST7565_A0_PIN);
- spiSend(&SPID1, 1, &cmd);
-}
-
-static GFXINLINE void write_data(GDisplay *g, gU8 *data, gU16 length) {
- (void)g;
- writePinHigh(ST7565_A0_PIN);
- spiSend(&SPID1, length, data);
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
diff --git a/drivers/ugfx/gdisp/st7565/driver.mk b/drivers/ugfx/gdisp/st7565/driver.mk
deleted file mode 100644
index 799a986b0a..0000000000
--- a/drivers/ugfx/gdisp/st7565/driver.mk
+++ /dev/null
@@ -1,3 +0,0 @@
-GFXINC += drivers/ugfx/gdisp/st7565
-GFXSRC += drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
-GDISP_DRIVER_LIST += GDISPVMT_ST7565_QMK
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
deleted file mode 100644
index f586f97e38..0000000000
--- a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-# define GDISP_DRIVER_VMT GDISPVMT_ST7565_QMK
-# include "gdisp_lld_config.h"
-# include "src/gdisp/gdisp_driver.h"
-
-# include "board_st7565.h"
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-# ifndef GDISP_SCREEN_HEIGHT
-# define GDISP_SCREEN_HEIGHT LCD_HEIGHT
-# endif
-# ifndef GDISP_SCREEN_WIDTH
-# define GDISP_SCREEN_WIDTH LCD_WIDTH
-# endif
-# ifndef GDISP_INITIAL_CONTRAST
-# define GDISP_INITIAL_CONTRAST 35
-# endif
-# ifndef GDISP_INITIAL_BACKLIGHT
-# define GDISP_INITIAL_BACKLIGHT 100
-# endif
-
-# define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER << 0)
-
-# include "st7565.h"
-
-/*===========================================================================*/
-/* Driver config defaults for backward compatibility. */
-/*===========================================================================*/
-# ifndef ST7565_LCD_BIAS
-# define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
-# endif
-# ifndef ST7565_ADC
-# define ST7565_ADC ST7565_ADC_NORMAL
-# endif
-# ifndef ST7565_COM_SCAN
-# define ST7565_COM_SCAN ST7565_COM_SCAN_INC
-# endif
-# ifndef ST7565_PAGE_ORDER
-# define ST7565_PAGE_ORDER 0, 1, 2, 3, 4, 5, 6, 7
-# endif
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-// Some common routines and macros
-# define RAM(g) ((gU8 *)g->priv)
-# define write_cmd2(g, cmd1, cmd2) \
- { \
- write_cmd(g, cmd1); \
- write_cmd(g, cmd2); \
- }
-# define write_cmd3(g, cmd1, cmd2, cmd3) \
- { \
- write_cmd(g, cmd1); \
- write_cmd(g, cmd2); \
- write_cmd(g, cmd3); \
- }
-
-// Some common routines and macros
-# define delay(us) gfxSleepMicroseconds(us)
-# define delay_ms(ms) gfxSleepMilliseconds(ms)
-
-# define xyaddr(x, y) ((x) + ((y) >> 3) * GDISP_SCREEN_WIDTH)
-# define xybit(y) (1 << ((y)&7))
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/*
- * As this controller can't update on a pixel boundary we need to maintain the
- * the entire display surface in memory so that we can do the necessary bit
- * operations. Fortunately it is a small display in monochrome.
- * 64 * 128 / 8 = 1024 bytes.
- */
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
- // The private area is the display surface.
- g->priv = gfxAlloc(GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8);
- if (!g->priv) {
- return gFalse;
- }
-
- // Initialise the board interface
- init_board(g);
-
- // Hardware reset
- setpin_reset(g, TRUE);
- gfxSleepMilliseconds(20);
- setpin_reset(g, FALSE);
- gfxSleepMilliseconds(20);
- acquire_bus(g);
-
- write_cmd(g, ST7565_LCD_BIAS);
- write_cmd(g, ST7565_ADC);
- write_cmd(g, ST7565_COM_SCAN);
-
- write_cmd(g, ST7565_START_LINE | 0);
-
- write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST * 64 / 101);
- write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
-
- // turn on voltage converter (VC=1, VR=0, VF=0)
- write_cmd(g, ST7565_POWER_CONTROL | 0x04);
- delay_ms(50);
-
- // turn on voltage regulator (VC=1, VR=1, VF=0)
- write_cmd(g, ST7565_POWER_CONTROL | 0x06);
- delay_ms(50);
-
- // turn on voltage follower (VC=1, VR=1, VF=1)
- write_cmd(g, ST7565_POWER_CONTROL | 0x07);
- delay_ms(50);
-
- write_cmd(g, ST7565_DISPLAY_ON);
- write_cmd(g, ST7565_ALLON_NORMAL);
- write_cmd(g, ST7565_INVERT_DISPLAY); // Disable Inversion of display.
-
- write_cmd(g, ST7565_RMW);
-
- // Finish Init
- post_init_board(g);
-
- // Release the bus
- release_bus(g);
-
- /* Initialise the GDISP structure */
- g->g.Width = GDISP_SCREEN_WIDTH;
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Orientation = GDISP_ROTATE_0;
- g->g.Powermode = powerOff;
- g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
- g->g.Contrast = GDISP_INITIAL_CONTRAST;
- return TRUE;
-}
-
-# if GDISP_HARDWARE_FLUSH
-LLDSPEC void gdisp_lld_flush(GDisplay *g) {
- unsigned p;
-
- // Don't flush if we don't need it.
- if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return;
-
- acquire_bus(g);
- gU8 pagemap[] = {ST7565_PAGE_ORDER};
- for (p = 0; p < sizeof(pagemap); p++) {
- write_cmd(g, ST7565_PAGE | pagemap[p]);
- write_cmd(g, ST7565_COLUMN_MSB | 0);
- write_cmd(g, ST7565_COLUMN_LSB | 0);
- write_cmd(g, ST7565_RMW);
- write_data(g, RAM(g) + (p * GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
- }
- release_bus(g);
-
- g->flags &= ~GDISP_FLG_NEEDFLUSH;
-}
-# endif
-
-# if GDISP_HARDWARE_DRAWPIXEL
-LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
- coord_t x, y;
-
- switch (g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_90:
- x = g->p.y;
- y = GDISP_SCREEN_HEIGHT - 1 - g->p.x;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
- y = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
- break;
- case GDISP_ROTATE_270:
- x = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
- y = g->p.x;
- break;
- }
- if (gdispColor2Native(g->p.color) != Black)
- RAM(g)[xyaddr(x, y)] |= xybit(y);
- else
- RAM(g)[xyaddr(x, y)] &= ~xybit(y);
- g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-# endif
-
-# if GDISP_HARDWARE_PIXELREAD
-LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
- coord_t x, y;
-
- switch (g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_90:
- x = g->p.y;
- y = GDISP_SCREEN_HEIGHT - 1 - g->p.x;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
- y = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
- break;
- case GDISP_ROTATE_270:
- x = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
- y = g->p.x;
- break;
- }
- return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
-}
-# endif
-
-# if GDISP_HARDWARE_BITFILLS
-LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
- uint8_t *buffer = (uint8_t *)g->p.ptr;
- int linelength = g->p.cx;
- for (int i = 0; i < g->p.cy; i++) {
- unsigned dstx = g->p.x;
- unsigned dsty = g->p.y + i;
- unsigned srcx = g->p.x1;
- unsigned srcy = g->p.y1 + i;
- unsigned srcbit = srcy * g->p.x2 + srcx;
- for (int j = 0; j < linelength; j++) {
- uint8_t src = buffer[srcbit / 8];
- uint8_t bit = 7 - (srcbit % 8);
- uint8_t bitset = (src >> bit) & 1;
- uint8_t *dst = &(RAM(g)[xyaddr(dstx, dsty)]);
- if (bitset) {
- *dst |= xybit(dsty);
- } else {
- *dst &= ~xybit(dsty);
- }
- dstx++;
- srcbit++;
- }
- }
- g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-# endif
-
-# if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-LLDSPEC void gdisp_lld_control(GDisplay *g) {
- switch (g->p.x) {
- case GDISP_CONTROL_POWER:
- if (g->g.Powermode == (powermode_t)g->p.ptr) return;
- switch ((powermode_t)g->p.ptr) {
- case powerOff:
- case powerSleep:
- case powerDeepSleep:
- acquire_bus(g);
- write_cmd(g, ST7565_DISPLAY_OFF);
- release_bus(g);
- break;
- case powerOn:
- acquire_bus(g);
- write_cmd(g, ST7565_DISPLAY_ON);
- release_bus(g);
- break;
- default:
- return;
- }
- g->g.Powermode = (powermode_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_ORIENTATION:
- if (g->g.Orientation == (orientation_t)g->p.ptr) return;
- switch ((orientation_t)g->p.ptr) {
- /* Rotation is handled by the drawing routines */
- case GDISP_ROTATE_0:
- case GDISP_ROTATE_180:
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_90:
- case GDISP_ROTATE_270:
- g->g.Height = GDISP_SCREEN_WIDTH;
- g->g.Width = GDISP_SCREEN_HEIGHT;
- break;
- default:
- return;
- }
- g->g.Orientation = (orientation_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_CONTRAST:
- if ((unsigned)g->p.ptr > 100) g->p.ptr = (void *)100;
- acquire_bus(g);
- write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr) << 6) / 101) & 0x3F);
- release_bus(g);
- g->g.Contrast = (unsigned)g->p.ptr;
- return;
- }
-}
-# endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
deleted file mode 100644
index 6052058ec2..0000000000
--- a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support. */
-/*===========================================================================*/
-
-# define GDISP_HARDWARE_FLUSH GFXON // This controller requires flushing
-# define GDISP_HARDWARE_DRAWPIXEL GFXON
-# define GDISP_HARDWARE_PIXELREAD GFXON
-# define GDISP_HARDWARE_CONTROL GFXON
-# define GDISP_HARDWARE_BITFILLS GFXON
-
-# define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO
-
-#endif /* GFX_USE_GDISP */
-
-#endif /* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/st7565/st7565.h b/drivers/ugfx/gdisp/st7565/st7565.h
deleted file mode 100644
index 3c77a88569..0000000000
--- a/drivers/ugfx/gdisp/st7565/st7565.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _ST7565_H
-#define _ST7565_H
-
-#define ST7565_CONTRAST 0x81
-#define ST7565_ALLON_NORMAL 0xA4
-#define ST7565_ALLON 0xA5
-#define ST7565_POSITIVE_DISPLAY 0xA6
-#define ST7565_INVERT_DISPLAY 0xA7
-#define ST7565_DISPLAY_OFF 0xAE
-#define ST7565_DISPLAY_ON 0xAF
-
-#define ST7565_LCD_BIAS_7 0xA3
-#define ST7565_LCD_BIAS_9 0xA2
-
-#define ST7565_ADC_NORMAL 0xA0
-#define ST7565_ADC_REVERSE 0xA1
-
-#define ST7565_COM_SCAN_INC 0xC0
-#define ST7565_COM_SCAN_DEC 0xC8
-
-#define ST7565_START_LINE 0x40
-#define ST7565_PAGE 0xB0
-#define ST7565_COLUMN_MSB 0x10
-#define ST7565_COLUMN_LSB 0x00
-#define ST7565_RMW 0xE0
-
-#define ST7565_RESISTOR_RATIO 0x20
-#define ST7565_POWER_CONTROL 0x28
-
-#define ST7565_RESET 0xE2
-
-#endif /* _ST7565_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 17:57:38 +0000