diff options
Diffstat (limited to 'drivers/boards')
28 files changed, 0 insertions, 7071 deletions
diff --git a/drivers/boards/BLACKPILL_STM32_F401/board.c b/drivers/boards/BLACKPILL_STM32_F401/board.c deleted file mode 100644 index 330e06c8aa..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/board.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" -#include "stm32_gpio.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB1(STM32_GPIO_EN_MASK); - rccEnableAHB1(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) {} diff --git a/drivers/boards/BLACKPILL_STM32_F401/board.h b/drivers/boards/BLACKPILL_STM32_F401/board.h deleted file mode 100644 index 2d1cd9ff72..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/board.h +++ /dev/null @@ -1,568 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/* - * Setup for STM32F401CCU6 black pill board. - */ - -/* - * Board identifier. - */ -#define BOARD_BLACKPILL_STM32_F401 -#define BOARD_NAME "STM32F401CCU6 blackpill" - -/* - * Allow Board to boot USB without extra A9 hardware/software config - */ -#define BOARD_OTG_NOVBUSSENS 1 - -/* - * Board oscillators-related settings. - */ -#if !defined(STM32_LSECLK) -# define STM32_LSECLK 32768U -#endif - -#if !defined(STM32_HSECLK) -# define STM32_HSECLK 25000000U -#endif - -/* - * Board voltages. - * Required for performance limits calculation. - */ -#define STM32_VDD 300U - -/* - * MCU type as defined in the ST header. - */ -#define STM32F401xC - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_CS43L22_LRCK 4U -#define GPIOA_L3GD20_SCL 5U -#define GPIOA_L3GD20_SD0 6U -#define GPIOA_L3GD20_SDI 7U -#define GPIOA_PIN8 8U -#define GPIOA_VBUS_FS 9U -#define GPIOA_OTG_FS_ID 10U -#define GPIOA_OTG_FS_DM 11U -#define GPIOA_OTG_FS_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_SWO 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_LSM303DLHC_SCL 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_LSM303DLHC_SDA 9U -#define GPIOB_MP45DT02_CLK_IN 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_PIN13 13U -#define GPIOB_PIN14 14U -#define GPIOB_PIN15 15U - -#define GPIOC_OTG_FS_POWER_ON 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_CS43L22_AIN4x 3U -#define GPIOC_MP45DT02_PDM_OUT 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_PIN6 6U -#define GPIOC_CS43L22_MCLK 7U -#define GPIOC_PIN8 8U -#define GPIOC_PIN9 9U -#define GPIOC_CS43L22_SCLK 10U -#define GPIOC_PIN11 11U -#define GPIOC_CS43L22_SDIN 12U -#define GPIOC_PIN13 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_CS43L22_RESET 4U -#define GPIOD_OverCurrent 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_LED4 12U -#define GPIOD_LED3 13U -#define GPIOD_LED5 14U -#define GPIOD_LED6 15U - -#define GPIOE_L3GD20_INT1 0U -#define GPIOE_L3GD20_INT2 1U -#define GPIOE_LSM303DLHC_DRDY 2U -#define GPIOE_L3GD20_CS 3U -#define GPIOE_LSM303DLHC_INT1 4U -#define GPIOE_LSM303DLHC_INT2 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_PIN0 0U -#define GPIOF_PIN1 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -#define GPIOG_PIN0 0U -#define GPIOG_PIN1 1U -#define GPIOG_PIN2 2U -#define GPIOG_PIN3 3U -#define GPIOG_PIN4 4U -#define GPIOG_PIN5 5U -#define GPIOG_PIN6 6U -#define GPIOG_PIN7 7U -#define GPIOG_PIN8 8U -#define GPIOG_PIN9 9U -#define GPIOG_PIN10 10U -#define GPIOG_PIN11 11U -#define GPIOG_PIN12 12U -#define GPIOG_PIN13 13U -#define GPIOG_PIN14 14U -#define GPIOG_PIN15 15U - -#define GPIOH_OSC_IN 0U -#define GPIOH_OSC_OUT 1U -#define GPIOH_PIN2 2U -#define GPIOH_PIN3 3U -#define GPIOH_PIN4 4U -#define GPIOH_PIN5 5U -#define GPIOH_PIN6 6U -#define GPIOH_PIN7 7U -#define GPIOH_PIN8 8U -#define GPIOH_PIN9 9U -#define GPIOH_PIN10 10U -#define GPIOH_PIN11 11U -#define GPIOH_PIN12 12U -#define GPIOH_PIN13 13U -#define GPIOH_PIN14 14U -#define GPIOH_PIN15 15U - -#define GPIOI_PIN0 0U -#define GPIOI_PIN1 1U -#define GPIOI_PIN2 2U -#define GPIOI_PIN3 3U -#define GPIOI_PIN4 4U -#define GPIOI_PIN5 5U -#define GPIOI_PIN6 6U -#define GPIOI_PIN7 7U -#define GPIOI_PIN8 8U -#define GPIOI_PIN9 9U -#define GPIOI_PIN10 10U -#define GPIOI_PIN11 11U -#define GPIOI_PIN12 12U -#define GPIOI_PIN13 13U -#define GPIOI_PIN14 14U -#define GPIOI_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_BUTTON PAL_LINE(GPIOA, 0U) -#define LINE_CS43L22_LRCK PAL_LINE(GPIOA, 4U) -#define LINE_L3GD20_SCL PAL_LINE(GPIOA, 5U) -#define LINE_L3GD20_SD0 PAL_LINE(GPIOA, 6U) -#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U) -#define LINE_VBUS_FS PAL_LINE(GPIOA, 9U) -#define LINE_OTG_FS_ID PAL_LINE(GPIOA, 10U) -#define LINE_OTG_FS_DM PAL_LINE(GPIOA, 11U) -#define LINE_OTG_FS_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) -#define LINE_SWO PAL_LINE(GPIOB, 3U) -#define LINE_LSM303DLHC_SCL PAL_LINE(GPIOB, 6U) -#define LINE_LSM303DLHC_SDA PAL_LINE(GPIOB, 9U) -#define LINE_MP45DT02_CLK_IN PAL_LINE(GPIOB, 10U) -#define LINE_OTG_FS_POWER_ON PAL_LINE(GPIOC, 0U) -#define LINE_CS43L22_AIN4x PAL_LINE(GPIOC, 3U) -#define LINE_MP45DT02_PDM_OUT PAL_LINE(GPIOC, 3U) -#define LINE_CS43L22_MCLK PAL_LINE(GPIOC, 7U) -#define LINE_CS43L22_SCLK PAL_LINE(GPIOC, 10U) -#define LINE_CS43L22_SDIN PAL_LINE(GPIOC, 12U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) -#define LINE_CS43L22_RESET PAL_LINE(GPIOD, 4U) -#define LINE_OverCurrent PAL_LINE(GPIOD, 5U) -#define LINE_LED4 PAL_LINE(GPIOD, 12U) -#define LINE_LED3 PAL_LINE(GPIOD, 13U) -#define LINE_LED5 PAL_LINE(GPIOD, 14U) -#define LINE_LED6 PAL_LINE(GPIOD, 15U) -#define LINE_L3GD20_INT1 PAL_LINE(GPIOE, 0U) -#define LINE_L3GD20_INT2 PAL_LINE(GPIOE, 1U) -#define LINE_LSM303DLHC_DRDY PAL_LINE(GPIOE, 2U) -#define LINE_L3GD20_CS PAL_LINE(GPIOE, 3U) -#define LINE_LSM303DLHC_INT1 PAL_LINE(GPIOE, 4U) -#define LINE_LSM303DLHC_INT2 PAL_LINE(GPIOE, 5U) -#define LINE_OSC_IN PAL_LINE(GPIOH, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOH, 1U) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n)*2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n)*2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n)*2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - BUTTON (input floating). - * PA1 - PIN1 (input pullup). - * PA2 - PIN2 (input pullup). - * PA3 - PIN3 (input pullup). - * PA4 - CS43L22_LRCK (alternate 6). - * PA5 - L3GD20_SCL (alternate 5). - * PA6 - L3GD20_SD0 (alternate 5). - * PA7 - L3GD20_SDI (alternate 5). - * PA8 - PIN8 (input pullup). - * PA9 - VBUS_FS (input floating). - * PA10 - OTG_FS_ID (alternate 10). - * PA11 - OTG_FS_DM (alternate 10). - * PA12 - OTG_FS_DP (alternate 10). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | PIN_MODE_INPUT(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_ALTERNATE(GPIOA_CS43L22_LRCK) | PIN_MODE_ALTERNATE(GPIOA_L3GD20_SCL) | PIN_MODE_ALTERNATE(GPIOA_L3GD20_SD0) | PIN_MODE_ALTERNATE(GPIOA_L3GD20_SDI) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_VBUS_FS) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_ID) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | PIN_OTYPE_PUSHPULL(GPIOA_CS43L22_LRCK) | PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SCL) | PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SD0) | PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SDI) | PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | PIN_OTYPE_PUSHPULL(GPIOA_VBUS_FS) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_ID) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_HIGH(GPIOA_BUTTON) | PIN_OSPEED_HIGH(GPIOA_PIN1) | PIN_OSPEED_HIGH(GPIOA_PIN2) | PIN_OSPEED_HIGH(GPIOA_PIN3) | PIN_OSPEED_HIGH(GPIOA_CS43L22_LRCK) | PIN_OSPEED_HIGH(GPIOA_L3GD20_SCL) | PIN_OSPEED_HIGH(GPIOA_L3GD20_SD0) | PIN_OSPEED_HIGH(GPIOA_L3GD20_SDI) | PIN_OSPEED_HIGH(GPIOA_PIN8) | PIN_OSPEED_HIGH(GPIOA_VBUS_FS) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_ID) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | PIN_PUPDR_PULLUP(GPIOA_PIN1) | PIN_PUPDR_PULLUP(GPIOA_PIN2) | PIN_PUPDR_PULLUP(GPIOA_PIN3) | PIN_PUPDR_FLOATING(GPIOA_CS43L22_LRCK) | PIN_PUPDR_FLOATING(GPIOA_L3GD20_SCL) | PIN_PUPDR_PULLUP(GPIOA_L3GD20_SD0) | PIN_PUPDR_PULLUP(GPIOA_L3GD20_SDI) | PIN_PUPDR_PULLUP(GPIOA_PIN8) | PIN_PUPDR_FLOATING(GPIOA_VBUS_FS) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_ID) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | PIN_PUPDR_FLOATING(GPIOA_SWDIO) | PIN_PUPDR_FLOATING(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | PIN_ODR_HIGH(GPIOA_PIN1) | PIN_ODR_HIGH(GPIOA_PIN2) | PIN_ODR_HIGH(GPIOA_PIN3) | PIN_ODR_HIGH(GPIOA_CS43L22_LRCK) | PIN_ODR_HIGH(GPIOA_L3GD20_SCL) | PIN_ODR_HIGH(GPIOA_L3GD20_SD0) | PIN_ODR_HIGH(GPIOA_L3GD20_SDI) | PIN_ODR_HIGH(GPIOA_PIN8) | PIN_ODR_HIGH(GPIOA_VBUS_FS) | PIN_ODR_HIGH(GPIOA_OTG_FS_ID) | PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | PIN_AFIO_AF(GPIOA_PIN1, 0U) | PIN_AFIO_AF(GPIOA_PIN2, 0U) | PIN_AFIO_AF(GPIOA_PIN3, 0U) | PIN_AFIO_AF(GPIOA_CS43L22_LRCK, 6U) | PIN_AFIO_AF(GPIOA_L3GD20_SCL, 5U) | PIN_AFIO_AF(GPIOA_L3GD20_SD0, 5U) | PIN_AFIO_AF(GPIOA_L3GD20_SDI, 5U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | PIN_AFIO_AF(GPIOA_VBUS_FS, 0U) | PIN_AFIO_AF(GPIOA_OTG_FS_ID, 10U) | PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - SWO (alternate 0). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - LSM303DLHC_SCL (alternate 4). - * PB7 - PIN7 (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - LSM303DLHC_SDA (alternate 4). - * PB10 - MP45DT02_CLK_IN (alternate 5). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - PIN13 (input pullup). - * PB14 - PIN14 (input pullup). - * PB15 - PIN15 (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_ALTERNATE(GPIOB_SWO) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_ALTERNATE(GPIOB_LSM303DLHC_SCL) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_ALTERNATE(GPIOB_LSM303DLHC_SDA) | PIN_MODE_ALTERNATE(GPIOB_MP45DT02_CLK_IN) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_INPUT(GPIOB_PIN13) | PIN_MODE_INPUT(GPIOB_PIN14) | PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_SWO) | PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | PIN_OTYPE_PUSHPULL(GPIOB_LSM303DLHC_SCL) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | PIN_OTYPE_PUSHPULL(GPIOB_LSM303DLHC_SDA) | PIN_OTYPE_PUSHPULL(GPIOB_MP45DT02_CLK_IN) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_HIGH(GPIOB_PIN0) | PIN_OSPEED_HIGH(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_SWO) | PIN_OSPEED_HIGH(GPIOB_PIN4) | PIN_OSPEED_HIGH(GPIOB_PIN5) | PIN_OSPEED_HIGH(GPIOB_LSM303DLHC_SCL) | PIN_OSPEED_HIGH(GPIOB_PIN7) | PIN_OSPEED_HIGH(GPIOB_PIN8) | PIN_OSPEED_HIGH(GPIOB_LSM303DLHC_SDA) | PIN_OSPEED_HIGH(GPIOB_MP45DT02_CLK_IN) | PIN_OSPEED_HIGH(GPIOB_PIN11) | PIN_OSPEED_HIGH(GPIOB_PIN12) | PIN_OSPEED_HIGH(GPIOB_PIN13) | PIN_OSPEED_HIGH(GPIOB_PIN14) | PIN_OSPEED_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_SWO) | PIN_PUPDR_PULLUP(GPIOB_PIN4) | PIN_PUPDR_PULLUP(GPIOB_PIN5) | PIN_PUPDR_FLOATING(GPIOB_LSM303DLHC_SCL) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_PIN8) | PIN_PUPDR_FLOATING(GPIOB_LSM303DLHC_SDA) | PIN_PUPDR_FLOATING(GPIOB_MP45DT02_CLK_IN) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_PULLUP(GPIOB_PIN13) | PIN_PUPDR_PULLUP(GPIOB_PIN14) | PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_SWO) | PIN_ODR_HIGH(GPIOB_PIN4) | PIN_ODR_HIGH(GPIOB_PIN5) | PIN_ODR_HIGH(GPIOB_LSM303DLHC_SCL) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_PIN8) | PIN_ODR_HIGH(GPIOB_LSM303DLHC_SDA) | PIN_ODR_HIGH(GPIOB_MP45DT02_CLK_IN) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_PIN13) | PIN_ODR_HIGH(GPIOB_PIN14) | PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_SWO, 0U) | PIN_AFIO_AF(GPIOB_PIN4, 0U) | PIN_AFIO_AF(GPIOB_PIN5, 0U) | PIN_AFIO_AF(GPIOB_LSM303DLHC_SCL, 4U) | PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | PIN_AFIO_AF(GPIOB_LSM303DLHC_SDA, 4U) | PIN_AFIO_AF(GPIOB_MP45DT02_CLK_IN, 5U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_PIN13, 0U) | PIN_AFIO_AF(GPIOB_PIN14, 0U) | PIN_AFIO_AF(GPIOB_PIN15, 0U)) - -/* - * GPIOC setup: - * - * PC0 - OTG_FS_POWER_ON (output pushpull maximum). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - CS43L22_AIN4x MP45DT02_PDM_OUT(alternate 5). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - PIN6 (input pullup). - * PC7 - CS43L22_MCLK (alternate 6). - * PC8 - PIN8 (input pullup). - * PC9 - PIN9 (input pullup). - * PC10 - CS43L22_SCLK (alternate 6). - * PC11 - PIN11 (input pullup). - * PC12 - CS43L22_SDIN (alternate 6). - * PC13 - PIN13 (input pullup). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_OTG_FS_POWER_ON) | PIN_MODE_INPUT(GPIOC_PIN1) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_AIN4x) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_INPUT(GPIOC_PIN6) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_MCLK) | PIN_MODE_INPUT(GPIOC_PIN8) | PIN_MODE_INPUT(GPIOC_PIN9) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_SCLK) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_SDIN) | PIN_MODE_INPUT(GPIOC_PIN13) | PIN_MODE_INPUT(GPIOC_OSC32_IN) | PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_OTG_FS_POWER_ON) | PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_AIN4x) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_MCLK) | PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_SCLK) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_SDIN) | PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_OTG_FS_POWER_ON) | PIN_OSPEED_HIGH(GPIOC_PIN1) | PIN_OSPEED_HIGH(GPIOC_PIN2) | PIN_OSPEED_HIGH(GPIOC_CS43L22_AIN4x) | PIN_OSPEED_HIGH(GPIOC_PIN4) | PIN_OSPEED_HIGH(GPIOC_PIN5) | PIN_OSPEED_HIGH(GPIOC_PIN6) | PIN_OSPEED_HIGH(GPIOC_CS43L22_MCLK) | PIN_OSPEED_HIGH(GPIOC_PIN8) | PIN_OSPEED_HIGH(GPIOC_PIN9) | PIN_OSPEED_HIGH(GPIOC_CS43L22_SCLK) | PIN_OSPEED_HIGH(GPIOC_PIN11) | PIN_OSPEED_HIGH(GPIOC_CS43L22_SDIN) | PIN_OSPEED_HIGH(GPIOC_PIN13) | PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_OTG_FS_POWER_ON) | PIN_PUPDR_PULLUP(GPIOC_PIN1) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_FLOATING(GPIOC_CS43L22_AIN4x) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_PULLUP(GPIOC_PIN6) | PIN_PUPDR_PULLUP(GPIOC_CS43L22_MCLK) | PIN_PUPDR_PULLUP(GPIOC_PIN8) | PIN_PUPDR_PULLUP(GPIOC_PIN9) | PIN_PUPDR_PULLUP(GPIOC_CS43L22_SCLK) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_CS43L22_SDIN) | PIN_PUPDR_PULLUP(GPIOC_PIN13) | PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_OTG_FS_POWER_ON) | PIN_ODR_HIGH(GPIOC_PIN1) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_CS43L22_AIN4x) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_HIGH(GPIOC_PIN6) | PIN_ODR_HIGH(GPIOC_CS43L22_MCLK) | PIN_ODR_HIGH(GPIOC_PIN8) | PIN_ODR_HIGH(GPIOC_PIN9) | PIN_ODR_HIGH(GPIOC_CS43L22_SCLK) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_CS43L22_SDIN) | PIN_ODR_HIGH(GPIOC_PIN13) | PIN_ODR_HIGH(GPIOC_OSC32_IN) | PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_OTG_FS_POWER_ON, 0U) | PIN_AFIO_AF(GPIOC_PIN1, 0U) | PIN_AFIO_AF(GPIOC_PIN2, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_AIN4x, 5U) | PIN_AFIO_AF(GPIOC_PIN4, 0U) | PIN_AFIO_AF(GPIOC_PIN5, 0U) | PIN_AFIO_AF(GPIOC_PIN6, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_MCLK, 6U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | PIN_AFIO_AF(GPIOC_PIN9, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_SCLK, 6U) | PIN_AFIO_AF(GPIOC_PIN11, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_SDIN, 6U) | PIN_AFIO_AF(GPIOC_PIN13, 0U) | PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - CS43L22_RESET (output pushpull maximum). - * PD5 - OverCurrent (input floating). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - LED4 (output pushpull maximum). - * PD13 - LED3 (output pushpull maximum). - * PD14 - LED5 (output pushpull maximum). - * PD15 - LED6 (output pushpull maximum). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_OUTPUT(GPIOD_CS43L22_RESET) | PIN_MODE_INPUT(GPIOD_OverCurrent) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_OUTPUT(GPIOD_LED4) | PIN_MODE_OUTPUT(GPIOD_LED3) | PIN_MODE_OUTPUT(GPIOD_LED5) | PIN_MODE_OUTPUT(GPIOD_LED6)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_CS43L22_RESET) | PIN_OTYPE_PUSHPULL(GPIOD_OverCurrent) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_LED4) | PIN_OTYPE_PUSHPULL(GPIOD_LED3) | PIN_OTYPE_PUSHPULL(GPIOD_LED5) | PIN_OTYPE_PUSHPULL(GPIOD_LED6)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | PIN_OSPEED_HIGH(GPIOD_PIN1) | PIN_OSPEED_HIGH(GPIOD_PIN2) | PIN_OSPEED_HIGH(GPIOD_PIN3) | PIN_OSPEED_HIGH(GPIOD_CS43L22_RESET) | PIN_OSPEED_HIGH(GPIOD_OverCurrent) | PIN_OSPEED_HIGH(GPIOD_PIN6) | PIN_OSPEED_HIGH(GPIOD_PIN7) | PIN_OSPEED_HIGH(GPIOD_PIN8) | PIN_OSPEED_HIGH(GPIOD_PIN9) | PIN_OSPEED_HIGH(GPIOD_PIN10) | PIN_OSPEED_HIGH(GPIOD_PIN11) | PIN_OSPEED_HIGH(GPIOD_LED4) | PIN_OSPEED_HIGH(GPIOD_LED3) | PIN_OSPEED_HIGH(GPIOD_LED5) | PIN_OSPEED_HIGH(GPIOD_LED6)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_CS43L22_RESET) | PIN_PUPDR_FLOATING(GPIOD_OverCurrent) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_FLOATING(GPIOD_LED4) | PIN_PUPDR_FLOATING(GPIOD_LED3) | PIN_PUPDR_FLOATING(GPIOD_LED5) | PIN_PUPDR_FLOATING(GPIOD_LED6)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_CS43L22_RESET) | PIN_ODR_HIGH(GPIOD_OverCurrent) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_LOW(GPIOD_LED4) | PIN_ODR_LOW(GPIOD_LED3) | PIN_ODR_LOW(GPIOD_LED5) | PIN_ODR_LOW(GPIOD_LED6)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | PIN_AFIO_AF(GPIOD_PIN1, 0U) | PIN_AFIO_AF(GPIOD_PIN2, 0U) | PIN_AFIO_AF(GPIOD_PIN3, 0U) | PIN_AFIO_AF(GPIOD_CS43L22_RESET, 0U) | PIN_AFIO_AF(GPIOD_OverCurrent, 0U) | PIN_AFIO_AF(GPIOD_PIN6, 0U) | PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | PIN_AFIO_AF(GPIOD_PIN9, 0U) | PIN_AFIO_AF(GPIOD_PIN10, 0U) | PIN_AFIO_AF(GPIOD_PIN11, 0U) | PIN_AFIO_AF(GPIOD_LED4, 0U) | PIN_AFIO_AF(GPIOD_LED3, 0U) | PIN_AFIO_AF(GPIOD_LED5, 0U) | PIN_AFIO_AF(GPIOD_LED6, 0U)) - -/* - * GPIOE setup: - * - * PE0 - L3GD20_INT1 (input pullup). - * PE1 - L3GD20_INT2 (input pullup). - * PE2 - LSM303DLHC_DRDY (input floating). - * PE3 - L3GD20_CS (output pushpull maximum). - * PE4 - LSM303DLHC_INT1 (output pushpull maximum). - * PE5 - LSM303DLHC_INT2 (output pushpull maximum). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_L3GD20_INT1) | PIN_MODE_INPUT(GPIOE_L3GD20_INT2) | PIN_MODE_INPUT(GPIOE_LSM303DLHC_DRDY) | PIN_MODE_OUTPUT(GPIOE_L3GD20_CS) | PIN_MODE_OUTPUT(GPIOE_LSM303DLHC_INT1) | PIN_MODE_OUTPUT(GPIOE_LSM303DLHC_INT2) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_INPUT(GPIOE_PIN8) | PIN_MODE_INPUT(GPIOE_PIN9) | PIN_MODE_INPUT(GPIOE_PIN10) | PIN_MODE_INPUT(GPIOE_PIN11) | PIN_MODE_INPUT(GPIOE_PIN12) | PIN_MODE_INPUT(GPIOE_PIN13) | PIN_MODE_INPUT(GPIOE_PIN14) | PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_INT1) | PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_INT2) | PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_DRDY) | PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_CS) | PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_INT1) | PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_INT2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_L3GD20_INT1) | PIN_OSPEED_HIGH(GPIOE_L3GD20_INT2) | PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_DRDY) | PIN_OSPEED_HIGH(GPIOE_L3GD20_CS) | PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_INT1) | PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_INT2) | PIN_OSPEED_HIGH(GPIOE_PIN6) | PIN_OSPEED_HIGH(GPIOE_PIN7) | PIN_OSPEED_HIGH(GPIOE_PIN8) | PIN_OSPEED_HIGH(GPIOE_PIN9) | PIN_OSPEED_HIGH(GPIOE_PIN10) | PIN_OSPEED_HIGH(GPIOE_PIN11) | PIN_OSPEED_HIGH(GPIOE_PIN12) | PIN_OSPEED_HIGH(GPIOE_PIN13) | PIN_OSPEED_HIGH(GPIOE_PIN14) | PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_L3GD20_INT1) | PIN_PUPDR_PULLUP(GPIOE_L3GD20_INT2) | PIN_PUPDR_FLOATING(GPIOE_LSM303DLHC_DRDY) | PIN_PUPDR_PULLUP(GPIOE_L3GD20_CS) | PIN_PUPDR_PULLUP(GPIOE_LSM303DLHC_INT1) | PIN_PUPDR_PULLUP(GPIOE_LSM303DLHC_INT2) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_PULLUP(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_PULLUP(GPIOE_PIN13) | PIN_PUPDR_PULLUP(GPIOE_PIN14) | PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_L3GD20_INT1) | PIN_ODR_HIGH(GPIOE_L3GD20_INT2) | PIN_ODR_HIGH(GPIOE_LSM303DLHC_DRDY) | PIN_ODR_HIGH(GPIOE_L3GD20_CS) | PIN_ODR_HIGH(GPIOE_LSM303DLHC_INT1) | PIN_ODR_HIGH(GPIOE_LSM303DLHC_INT2) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_HIGH(GPIOE_PIN8) | PIN_ODR_HIGH(GPIOE_PIN9) | PIN_ODR_HIGH(GPIOE_PIN10) | PIN_ODR_HIGH(GPIOE_PIN11) | PIN_ODR_HIGH(GPIOE_PIN12) | PIN_ODR_HIGH(GPIOE_PIN13) | PIN_ODR_HIGH(GPIOE_PIN14) | PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_L3GD20_INT1, 0U) | PIN_AFIO_AF(GPIOE_L3GD20_INT2, 0U) | PIN_AFIO_AF(GPIOE_LSM303DLHC_DRDY, 0U) | PIN_AFIO_AF(GPIOE_L3GD20_CS, 0U) | PIN_AFIO_AF(GPIOE_LSM303DLHC_INT1, 0U) | PIN_AFIO_AF(GPIOE_LSM303DLHC_INT2, 0U) | PIN_AFIO_AF(GPIOE_PIN6, 0U) | PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | PIN_AFIO_AF(GPIOE_PIN9, 0U) | PIN_AFIO_AF(GPIOE_PIN10, 0U) | PIN_AFIO_AF(GPIOE_PIN11, 0U) | PIN_AFIO_AF(GPIOE_PIN12, 0U) | PIN_AFIO_AF(GPIOE_PIN13, 0U) | PIN_AFIO_AF(GPIOE_PIN14, 0U) | PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - PIN0 (input pullup). - * PF1 - PIN1 (input pullup). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | PIN_MODE_INPUT(GPIOF_PIN1) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | PIN_OSPEED_HIGH(GPIOF_PIN1) | PIN_OSPEED_HIGH(GPIOF_PIN2) | PIN_OSPEED_HIGH(GPIOF_PIN3) | PIN_OSPEED_HIGH(GPIOF_PIN4) | PIN_OSPEED_HIGH(GPIOF_PIN5) | PIN_OSPEED_HIGH(GPIOF_PIN6) | PIN_OSPEED_HIGH(GPIOF_PIN7) | PIN_OSPEED_HIGH(GPIOF_PIN8) | PIN_OSPEED_HIGH(GPIOF_PIN9) | PIN_OSPEED_HIGH(GPIOF_PIN10) | PIN_OSPEED_HIGH(GPIOF_PIN11) | PIN_OSPEED_HIGH(GPIOF_PIN12) | PIN_OSPEED_HIGH(GPIOF_PIN13) | PIN_OSPEED_HIGH(GPIOF_PIN14) | PIN_OSPEED_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | PIN_PUPDR_PULLUP(GPIOF_PIN1) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | PIN_ODR_HIGH(GPIOF_PIN1) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | PIN_AFIO_AF(GPIOF_PIN1, 0U) | PIN_AFIO_AF(GPIOF_PIN2, 0U) | PIN_AFIO_AF(GPIOF_PIN3, 0U) | PIN_AFIO_AF(GPIOF_PIN4, 0U) | PIN_AFIO_AF(GPIOF_PIN5, 0U) | PIN_AFIO_AF(GPIOF_PIN6, 0U) | PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | PIN_AFIO_AF(GPIOF_PIN9, 0U) | PIN_AFIO_AF(GPIOF_PIN10, 0U) | PIN_AFIO_AF(GPIOF_PIN11, 0U) | PIN_AFIO_AF(GPIOF_PIN12, 0U) | PIN_AFIO_AF(GPIOF_PIN13, 0U) | PIN_AFIO_AF(GPIOF_PIN14, 0U) | PIN_AFIO_AF(GPIOF_PIN15, 0U)) - -/* - * GPIOG setup: - * - * PG0 - PIN0 (input pullup). - * PG1 - PIN1 (input pullup). - * PG2 - PIN2 (input pullup). - * PG3 - PIN3 (input pullup). - * PG4 - PIN4 (input pullup). - * PG5 - PIN5 (input pullup). - * PG6 - PIN6 (input pullup). - * PG7 - PIN7 (input pullup). - * PG8 - PIN8 (input pullup). - * PG9 - PIN9 (input pullup). - * PG10 - PIN10 (input pullup). - * PG11 - PIN11 (input pullup). - * PG12 - PIN12 (input pullup). - * PG13 - PIN13 (input pullup). - * PG14 - PIN14 (input pullup). - * PG15 - PIN15 (input pullup). - */ -#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | PIN_MODE_INPUT(GPIOG_PIN1) | PIN_MODE_INPUT(GPIOG_PIN2) | PIN_MODE_INPUT(GPIOG_PIN3) | PIN_MODE_INPUT(GPIOG_PIN4) | PIN_MODE_INPUT(GPIOG_PIN5) | PIN_MODE_INPUT(GPIOG_PIN6) | PIN_MODE_INPUT(GPIOG_PIN7) | PIN_MODE_INPUT(GPIOG_PIN8) | PIN_MODE_INPUT(GPIOG_PIN9) | PIN_MODE_INPUT(GPIOG_PIN10) | PIN_MODE_INPUT(GPIOG_PIN11) | PIN_MODE_INPUT(GPIOG_PIN12) | PIN_MODE_INPUT(GPIOG_PIN13) | PIN_MODE_INPUT(GPIOG_PIN14) | PIN_MODE_INPUT(GPIOG_PIN15)) -#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) -#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | PIN_OSPEED_HIGH(GPIOG_PIN1) | PIN_OSPEED_HIGH(GPIOG_PIN2) | PIN_OSPEED_HIGH(GPIOG_PIN3) | PIN_OSPEED_HIGH(GPIOG_PIN4) | PIN_OSPEED_HIGH(GPIOG_PIN5) | PIN_OSPEED_HIGH(GPIOG_PIN6) | PIN_OSPEED_HIGH(GPIOG_PIN7) | PIN_OSPEED_HIGH(GPIOG_PIN8) | PIN_OSPEED_HIGH(GPIOG_PIN9) | PIN_OSPEED_HIGH(GPIOG_PIN10) | PIN_OSPEED_HIGH(GPIOG_PIN11) | PIN_OSPEED_HIGH(GPIOG_PIN12) | PIN_OSPEED_HIGH(GPIOG_PIN13) | PIN_OSPEED_HIGH(GPIOG_PIN14) | PIN_OSPEED_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | PIN_PUPDR_PULLUP(GPIOG_PIN1) | PIN_PUPDR_PULLUP(GPIOG_PIN2) | PIN_PUPDR_PULLUP(GPIOG_PIN3) | PIN_PUPDR_PULLUP(GPIOG_PIN4) | PIN_PUPDR_PULLUP(GPIOG_PIN5) | PIN_PUPDR_PULLUP(GPIOG_PIN6) | PIN_PUPDR_PULLUP(GPIOG_PIN7) | PIN_PUPDR_PULLUP(GPIOG_PIN8) | PIN_PUPDR_PULLUP(GPIOG_PIN9) | PIN_PUPDR_PULLUP(GPIOG_PIN10) | PIN_PUPDR_PULLUP(GPIOG_PIN11) | PIN_PUPDR_PULLUP(GPIOG_PIN12) | PIN_PUPDR_PULLUP(GPIOG_PIN13) | PIN_PUPDR_PULLUP(GPIOG_PIN14) | PIN_PUPDR_PULLUP(GPIOG_PIN15)) -#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | PIN_ODR_HIGH(GPIOG_PIN1) | PIN_ODR_HIGH(GPIOG_PIN2) | PIN_ODR_HIGH(GPIOG_PIN3) | PIN_ODR_HIGH(GPIOG_PIN4) | PIN_ODR_HIGH(GPIOG_PIN5) | PIN_ODR_HIGH(GPIOG_PIN6) | PIN_ODR_HIGH(GPIOG_PIN7) | PIN_ODR_HIGH(GPIOG_PIN8) | PIN_ODR_HIGH(GPIOG_PIN9) | PIN_ODR_HIGH(GPIOG_PIN10) | PIN_ODR_HIGH(GPIOG_PIN11) | PIN_ODR_HIGH(GPIOG_PIN12) | PIN_ODR_HIGH(GPIOG_PIN13) | PIN_ODR_HIGH(GPIOG_PIN14) | PIN_ODR_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | PIN_AFIO_AF(GPIOG_PIN1, 0U) | PIN_AFIO_AF(GPIOG_PIN2, 0U) | PIN_AFIO_AF(GPIOG_PIN3, 0U) | PIN_AFIO_AF(GPIOG_PIN4, 0U) | PIN_AFIO_AF(GPIOG_PIN5, 0U) | PIN_AFIO_AF(GPIOG_PIN6, 0U) | PIN_AFIO_AF(GPIOG_PIN7, 0U)) -#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | PIN_AFIO_AF(GPIOG_PIN9, 0U) | PIN_AFIO_AF(GPIOG_PIN10, 0U) | PIN_AFIO_AF(GPIOG_PIN11, 0U) | PIN_AFIO_AF(GPIOG_PIN12, 0U) | PIN_AFIO_AF(GPIOG_PIN13, 0U) | PIN_AFIO_AF(GPIOG_PIN14, 0U) | PIN_AFIO_AF(GPIOG_PIN15, 0U)) - -/* - * GPIOH setup: - * - * PH0 - OSC_IN (input floating). - * PH1 - OSC_OUT (input floating). - * PH2 - PIN2 (input pullup). - * PH3 - PIN3 (input pullup). - * PH4 - PIN4 (input pullup). - * PH5 - PIN5 (input pullup). - * PH6 - PIN6 (input pullup). - * PH7 - PIN7 (input pullup). - * PH8 - PIN8 (input pullup). - * PH9 - PIN9 (input pullup). - * PH10 - PIN10 (input pullup). - * PH11 - PIN11 (input pullup). - * PH12 - PIN12 (input pullup). - * PH13 - PIN13 (input pullup). - * PH14 - PIN14 (input pullup). - * PH15 - PIN15 (input pullup). - */ -#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | PIN_MODE_INPUT(GPIOH_OSC_OUT) | PIN_MODE_INPUT(GPIOH_PIN2) | PIN_MODE_INPUT(GPIOH_PIN3) | PIN_MODE_INPUT(GPIOH_PIN4) | PIN_MODE_INPUT(GPIOH_PIN5) | PIN_MODE_INPUT(GPIOH_PIN6) | PIN_MODE_INPUT(GPIOH_PIN7) | PIN_MODE_INPUT(GPIOH_PIN8) | PIN_MODE_INPUT(GPIOH_PIN9) | PIN_MODE_INPUT(GPIOH_PIN10) | PIN_MODE_INPUT(GPIOH_PIN11) | PIN_MODE_INPUT(GPIOH_PIN12) | PIN_MODE_INPUT(GPIOH_PIN13) | PIN_MODE_INPUT(GPIOH_PIN14) | PIN_MODE_INPUT(GPIOH_PIN15)) -#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) -#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | PIN_OSPEED_HIGH(GPIOH_PIN2) | PIN_OSPEED_HIGH(GPIOH_PIN3) | PIN_OSPEED_HIGH(GPIOH_PIN4) | PIN_OSPEED_HIGH(GPIOH_PIN5) | PIN_OSPEED_HIGH(GPIOH_PIN6) | PIN_OSPEED_HIGH(GPIOH_PIN7) | PIN_OSPEED_HIGH(GPIOH_PIN8) | PIN_OSPEED_HIGH(GPIOH_PIN9) | PIN_OSPEED_HIGH(GPIOH_PIN10) | PIN_OSPEED_HIGH(GPIOH_PIN11) | PIN_OSPEED_HIGH(GPIOH_PIN12) | PIN_OSPEED_HIGH(GPIOH_PIN13) | PIN_OSPEED_HIGH(GPIOH_PIN14) | PIN_OSPEED_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | PIN_PUPDR_PULLUP(GPIOH_PIN2) | PIN_PUPDR_PULLUP(GPIOH_PIN3) | PIN_PUPDR_PULLUP(GPIOH_PIN4) | PIN_PUPDR_PULLUP(GPIOH_PIN5) | PIN_PUPDR_PULLUP(GPIOH_PIN6) | PIN_PUPDR_PULLUP(GPIOH_PIN7) | PIN_PUPDR_PULLUP(GPIOH_PIN8) | PIN_PUPDR_PULLUP(GPIOH_PIN9) | PIN_PUPDR_PULLUP(GPIOH_PIN10) | PIN_PUPDR_PULLUP(GPIOH_PIN11) | PIN_PUPDR_PULLUP(GPIOH_PIN12) | PIN_PUPDR_PULLUP(GPIOH_PIN13) | PIN_PUPDR_PULLUP(GPIOH_PIN14) | PIN_PUPDR_PULLUP(GPIOH_PIN15)) -#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | PIN_ODR_HIGH(GPIOH_OSC_OUT) | PIN_ODR_HIGH(GPIOH_PIN2) | PIN_ODR_HIGH(GPIOH_PIN3) | PIN_ODR_HIGH(GPIOH_PIN4) | PIN_ODR_HIGH(GPIOH_PIN5) | PIN_ODR_HIGH(GPIOH_PIN6) | PIN_ODR_HIGH(GPIOH_PIN7) | PIN_ODR_HIGH(GPIOH_PIN8) | PIN_ODR_HIGH(GPIOH_PIN9) | PIN_ODR_HIGH(GPIOH_PIN10) | PIN_ODR_HIGH(GPIOH_PIN11) | PIN_ODR_HIGH(GPIOH_PIN12) | PIN_ODR_HIGH(GPIOH_PIN13) | PIN_ODR_HIGH(GPIOH_PIN14) | PIN_ODR_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | PIN_AFIO_AF(GPIOH_PIN2, 0U) | PIN_AFIO_AF(GPIOH_PIN3, 0U) | PIN_AFIO_AF(GPIOH_PIN4, 0U) | PIN_AFIO_AF(GPIOH_PIN5, 0U) | PIN_AFIO_AF(GPIOH_PIN6, 0U) | PIN_AFIO_AF(GPIOH_PIN7, 0U)) -#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | PIN_AFIO_AF(GPIOH_PIN9, 0U) | PIN_AFIO_AF(GPIOH_PIN10, 0U) | PIN_AFIO_AF(GPIOH_PIN11, 0U) | PIN_AFIO_AF(GPIOH_PIN12, 0U) | PIN_AFIO_AF(GPIOH_PIN13, 0U) | PIN_AFIO_AF(GPIOH_PIN14, 0U) | PIN_AFIO_AF(GPIOH_PIN15, 0U)) - -/* - * GPIOI setup: - * - * PI0 - PIN0 (input pullup). - * PI1 - PIN1 (input pullup). - * PI2 - PIN2 (input pullup). - * PI3 - PIN3 (input pullup). - * PI4 - PIN4 (input pullup). - * PI5 - PIN5 (input pullup). - * PI6 - PIN6 (input pullup). - * PI7 - PIN7 (input pullup). - * PI8 - PIN8 (input pullup). - * PI9 - PIN9 (input pullup). - * PI10 - PIN10 (input pullup). - * PI11 - PIN11 (input pullup). - * PI12 - PIN12 (input pullup). - * PI13 - PIN13 (input pullup). - * PI14 - PIN14 (input pullup). - * PI15 - PIN15 (input pullup). - */ -#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | PIN_MODE_INPUT(GPIOI_PIN1) | PIN_MODE_INPUT(GPIOI_PIN2) | PIN_MODE_INPUT(GPIOI_PIN3) | PIN_MODE_INPUT(GPIOI_PIN4) | PIN_MODE_INPUT(GPIOI_PIN5) | PIN_MODE_INPUT(GPIOI_PIN6) | PIN_MODE_INPUT(GPIOI_PIN7) | PIN_MODE_INPUT(GPIOI_PIN8) | PIN_MODE_INPUT(GPIOI_PIN9) | PIN_MODE_INPUT(GPIOI_PIN10) | PIN_MODE_INPUT(GPIOI_PIN11) | PIN_MODE_INPUT(GPIOI_PIN12) | PIN_MODE_INPUT(GPIOI_PIN13) | PIN_MODE_INPUT(GPIOI_PIN14) | PIN_MODE_INPUT(GPIOI_PIN15)) -#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | PIN_OTYPE_PUSHPULL(GPIOI_PIN15)) -#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | PIN_OSPEED_HIGH(GPIOI_PIN1) | PIN_OSPEED_HIGH(GPIOI_PIN2) | PIN_OSPEED_HIGH(GPIOI_PIN3) | PIN_OSPEED_HIGH(GPIOI_PIN4) | PIN_OSPEED_HIGH(GPIOI_PIN5) | PIN_OSPEED_HIGH(GPIOI_PIN6) | PIN_OSPEED_HIGH(GPIOI_PIN7) | PIN_OSPEED_HIGH(GPIOI_PIN8) | PIN_OSPEED_HIGH(GPIOI_PIN9) | PIN_OSPEED_HIGH(GPIOI_PIN10) | PIN_OSPEED_HIGH(GPIOI_PIN11) | PIN_OSPEED_HIGH(GPIOI_PIN12) | PIN_OSPEED_HIGH(GPIOI_PIN13) | PIN_OSPEED_HIGH(GPIOI_PIN14) | PIN_OSPEED_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | PIN_PUPDR_PULLUP(GPIOI_PIN1) | PIN_PUPDR_PULLUP(GPIOI_PIN2) | PIN_PUPDR_PULLUP(GPIOI_PIN3) | PIN_PUPDR_PULLUP(GPIOI_PIN4) | PIN_PUPDR_PULLUP(GPIOI_PIN5) | PIN_PUPDR_PULLUP(GPIOI_PIN6) | PIN_PUPDR_PULLUP(GPIOI_PIN7) | PIN_PUPDR_PULLUP(GPIOI_PIN8) | PIN_PUPDR_PULLUP(GPIOI_PIN9) | PIN_PUPDR_PULLUP(GPIOI_PIN10) | PIN_PUPDR_PULLUP(GPIOI_PIN11) | PIN_PUPDR_PULLUP(GPIOI_PIN12) | PIN_PUPDR_PULLUP(GPIOI_PIN13) | PIN_PUPDR_PULLUP(GPIOI_PIN14) | PIN_PUPDR_PULLUP(GPIOI_PIN15)) -#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | PIN_ODR_HIGH(GPIOI_PIN1) | PIN_ODR_HIGH(GPIOI_PIN2) | PIN_ODR_HIGH(GPIOI_PIN3) | PIN_ODR_HIGH(GPIOI_PIN4) | PIN_ODR_HIGH(GPIOI_PIN5) | PIN_ODR_HIGH(GPIOI_PIN6) | PIN_ODR_HIGH(GPIOI_PIN7) | PIN_ODR_HIGH(GPIOI_PIN8) | PIN_ODR_HIGH(GPIOI_PIN9) | PIN_ODR_HIGH(GPIOI_PIN10) | PIN_ODR_HIGH(GPIOI_PIN11) | PIN_ODR_HIGH(GPIOI_PIN12) | PIN_ODR_HIGH(GPIOI_PIN13) | PIN_ODR_HIGH(GPIOI_PIN14) | PIN_ODR_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | PIN_AFIO_AF(GPIOI_PIN1, 0U) | PIN_AFIO_AF(GPIOI_PIN2, 0U) | PIN_AFIO_AF(GPIOI_PIN3, 0U) | PIN_AFIO_AF(GPIOI_PIN4, 0U) | PIN_AFIO_AF(GPIOI_PIN5, 0U) | PIN_AFIO_AF(GPIOI_PIN6, 0U) | PIN_AFIO_AF(GPIOI_PIN7, 0U)) -#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | PIN_AFIO_AF(GPIOI_PIN9, 0U) | PIN_AFIO_AF(GPIOI_PIN10, 0U) | PIN_AFIO_AF(GPIOI_PIN11, 0U) | PIN_AFIO_AF(GPIOI_PIN12, 0U) | PIN_AFIO_AF(GPIOI_PIN13, 0U) | PIN_AFIO_AF(GPIOI_PIN14, 0U) | PIN_AFIO_AF(GPIOI_PIN15, 0U)) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(_FROM_ASM_) -# ifdef __cplusplus -extern "C" { -# endif -void boardInit(void); -# ifdef __cplusplus -} -# endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/drivers/boards/BLACKPILL_STM32_F401/board.mk b/drivers/boards/BLACKPILL_STM32_F401/board.mk deleted file mode 100644 index 33473ed6b1..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F401/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F401 - -# Shared variables -ALLCSRC += $(BOARDSRC) -ALLINC += $(BOARDINC) diff --git a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg b/drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg deleted file mode 100644 index 7559ceb938..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.chcfg +++ /dev/null @@ -1,1193 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32F4xx board Template --> -<board - xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" - xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f4xx_board.xsd"> - <configuration_settings> - <templates_path>resources/gencfg/processors/boards/stm32f4xx/templates</templates_path> - <output_path>..</output_path> - <hal_version>5.0.x</hal_version> - </configuration_settings> - <board_name>STMicroelectronics STM32F401C-Discovery</board_name> - <board_id>ST_STM32F401C_DISCOVERY</board_id> - <board_functions></board_functions> - <subtype>STM32F401xC</subtype> - <clocks - HSEFrequency="8000000" - HSEBypass="false" - LSEFrequency="0" - LSEBypass="false" - VDD="300" /> - <ports> - <GPIOA> - <pin0 - ID="BUTTON" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="CS43L22_LRCK" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="6" /> - <pin5 - ID="L3GD20_SCL" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="5" /> - <pin6 - ID="L3GD20_SD0" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="5" /> - <pin7 - ID="L3GD20_SDI" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="5" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="VBUS_FS" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin10 - ID="OTG_FS_ID" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="10" /> - <pin11 - ID="OTG_FS_DM" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="10" /> - <pin12 - ID="OTG_FS_DP" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="10" /> - <pin13 - ID="SWDIO" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SWCLK" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOA> - <GPIOB> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="SWO" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="LSM303DLHC_SCL" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="LSM303DLHC_SDA" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> - <pin10 - ID="MP45DT02_CLK_IN" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="5" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOB> - <GPIOC> - <pin0 - ID="OTG_FS_POWER_ON" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Output" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="CS43L22_AIN4x MP45DT02_PDM_OUT" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="5" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="CS43L22_MCLK" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="6" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="CS43L22_SCLK" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="6" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="CS43L22_SDIN" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="6" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="OSC32_IN" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin15 - ID="OSC32_OUT" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - </GPIOC> - <GPIOD> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="CS43L22_RESET" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Output" - Alternate="0" /> - <pin5 - ID="OverCurrent" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="LED4" - Type="PushPull" - Level="Low" - Speed="Maximum" - Resistor="Floating" - Mode="Output" - Alternate="0" /> - <pin13 - ID="LED3" - Type="PushPull" - Level="Low" - Speed="Maximum" - Resistor="Floating" - Mode="Output" - Alternate="0" /> - <pin14 - ID="LED5" - Type="PushPull" - Level="Low" - Speed="Maximum" - Resistor="Floating" - Mode="Output" - Alternate="0" /> - <pin15 - ID="LED6" - Type="PushPull" - Level="Low" - Speed="Maximum" - Resistor="Floating" - Mode="Output" - Alternate="0" /> - </GPIOD> - <GPIOE> - <pin0 - ID="L3GD20_INT1" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="L3GD20_INT2" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="LSM303DLHC_DRDY" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin3 - ID="L3GD20_CS" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Output" - Alternate="0" /> - <pin4 - ID="LSM303DLHC_INT1" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Output" - Alternate="0" /> - <pin5 - ID="LSM303DLHC_INT2" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Output" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOE> - <GPIOF> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOF> - <GPIOG> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOG> - <GPIOH> - <pin0 - ID="OSC_IN" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin1 - ID="OSC_OUT" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOH> - <GPIOI> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOI> - </ports> -</board> diff --git a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp b/drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp deleted file mode 100644 index 41754c1414..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp +++ /dev/null @@ -1,15 +0,0 @@ -sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f4xx/templates -outputRoot: .. -dataRoot: . - -freemarkerLinks: { - lib: ../../../../../tools/ftl/libs -} - -data : { - doc1:xml ( - board.chcfg - { - } - ) -} diff --git a/drivers/boards/BLACKPILL_STM32_F411/board.c b/drivers/boards/BLACKPILL_STM32_F411/board.c deleted file mode 100644 index 330e06c8aa..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/board.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" -#include "stm32_gpio.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB1(STM32_GPIO_EN_MASK); - rccEnableAHB1(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) {} diff --git a/drivers/boards/BLACKPILL_STM32_F411/board.h b/drivers/boards/BLACKPILL_STM32_F411/board.h deleted file mode 100644 index c0613b4a71..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/board.h +++ /dev/null @@ -1,583 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/* - * Setup for STM32F411CEU6 black pill board. - */ - -/* - * Board identifier. - */ -#define BOARD_BLACKPILL_STM32_F411 -#define BOARD_NAME "STM32F411CEU6 blackpill" - -/* - * Allow Board to boot USB without extra A9 hardware/software config - */ -#define BOARD_OTG_NOVBUSSENS 1 - -/* - * Board oscillators-related settings. - */ -#if !defined(STM32_LSECLK) -# define STM32_LSECLK 32768U -#endif - -#if !defined(STM32_HSECLK) -# define STM32_HSECLK 25000000U -#endif - -//#define STM32_HSE_BYPASS - -/* - * Board voltages. - * Required for performance limits calculation. - */ -#define STM32_VDD 300U - -/* - * MCU type as defined in the ST header. - */ -#define STM32F411xE - -/* - * IO pins assignments. - */ -#define GPIOA_ARD_A0 0U -#define GPIOA_ADC1_IN0 0U -#define GPIOA_ARD_A1 1U -#define GPIOA_ADC1_IN1 1U -#define GPIOA_ARD_D1 2U -#define GPIOA_USART2_TX 2U -#define GPIOA_ARD_D0 3U -#define GPIOA_USART2_RX 3U -#define GPIOA_ARD_A2 4U -#define GPIOA_ADC1_IN4 4U -#define GPIOA_LED_GREEN 5U -#define GPIOA_ARD_D13 5U -#define GPIOA_ARD_D12 6U -#define GPIOA_ARD_D11 7U -#define GPIOA_ARD_D7 8U -#define GPIOA_ARD_D8 9U -#define GPIOA_ARD_D2 10U -#define GPIOA_OTG_FS_DM 11U -#define GPIOA_OTG_FS_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_ARD_A3 0U -#define GPIOB_ADC1_IN8 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_SWO 3U -#define GPIOB_ARD_D3 3U -#define GPIOB_ARD_D5 4U -#define GPIOB_ARD_D4 5U -#define GPIOB_ARD_D10 6U -#define GPIOB_PIN7 7U -#define GPIOB_ARD_D15 8U -#define GPIOB_ARD_D14 9U -#define GPIOB_ARD_D6 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_PIN13 13U -#define GPIOB_PIN14 14U -#define GPIOB_PIN15 15U - -#define GPIOC_ARD_A5 0U -#define GPIOC_ADC1_IN10 0U -#define GPIOC_ARD_A4 1U -#define GPIOC_ADC1_IN11 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_PIN6 6U -#define GPIOC_ARD_D9 7U -#define GPIOC_PIN8 8U -#define GPIOC_PIN9 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_BUTTON 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_PIN0 0U -#define GPIOF_PIN1 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -#define GPIOG_PIN0 0U -#define GPIOG_PIN1 1U -#define GPIOG_PIN2 2U -#define GPIOG_PIN3 3U -#define GPIOG_PIN4 4U -#define GPIOG_PIN5 5U -#define GPIOG_PIN6 6U -#define GPIOG_PIN7 7U -#define GPIOG_PIN8 8U -#define GPIOG_PIN9 9U -#define GPIOG_PIN10 10U -#define GPIOG_PIN11 11U -#define GPIOG_PIN12 12U -#define GPIOG_PIN13 13U -#define GPIOG_PIN14 14U -#define GPIOG_PIN15 15U - -#define GPIOH_OSC_IN 0U -#define GPIOH_OSC_OUT 1U -#define GPIOH_PIN2 2U -#define GPIOH_PIN3 3U -#define GPIOH_PIN4 4U -#define GPIOH_PIN5 5U -#define GPIOH_PIN6 6U -#define GPIOH_PIN7 7U -#define GPIOH_PIN8 8U -#define GPIOH_PIN9 9U -#define GPIOH_PIN10 10U -#define GPIOH_PIN11 11U -#define GPIOH_PIN12 12U -#define GPIOH_PIN13 13U -#define GPIOH_PIN14 14U -#define GPIOH_PIN15 15U - -#define GPIOI_PIN0 0U -#define GPIOI_PIN1 1U -#define GPIOI_PIN2 2U -#define GPIOI_PIN3 3U -#define GPIOI_PIN4 4U -#define GPIOI_PIN5 5U -#define GPIOI_PIN6 6U -#define GPIOI_PIN7 7U -#define GPIOI_PIN8 8U -#define GPIOI_PIN9 9U -#define GPIOI_PIN10 10U -#define GPIOI_PIN11 11U -#define GPIOI_PIN12 12U -#define GPIOI_PIN13 13U -#define GPIOI_PIN14 14U -#define GPIOI_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_ARD_A0 PAL_LINE(GPIOA, 0U) -#define LINE_ADC1_IN0 PAL_LINE(GPIOA, 0U) -#define LINE_ARD_A1 PAL_LINE(GPIOA, 1U) -#define LINE_ADC1_IN1 PAL_LINE(GPIOA, 1U) -#define LINE_ARD_D1 PAL_LINE(GPIOA, 2U) -#define LINE_USART2_TX PAL_LINE(GPIOA, 2U) -#define LINE_ARD_D0 PAL_LINE(GPIOA, 3U) -#define LINE_USART2_RX PAL_LINE(GPIOA, 3U) -#define LINE_ARD_A2 PAL_LINE(GPIOA, 4U) -#define LINE_ADC1_IN4 PAL_LINE(GPIOA, 4U) -#define LINE_LED_GREEN PAL_LINE(GPIOA, 5U) -#define LINE_ARD_D13 PAL_LINE(GPIOA, 5U) -#define LINE_ARD_D12 PAL_LINE(GPIOA, 6U) -#define LINE_ARD_D11 PAL_LINE(GPIOA, 7U) -#define LINE_ARD_D7 PAL_LINE(GPIOA, 8U) -#define LINE_ARD_D8 PAL_LINE(GPIOA, 9U) -#define LINE_ARD_D2 PAL_LINE(GPIOA, 10U) -#define LINE_OTG_FS_DM PAL_LINE(GPIOA, 11U) -#define LINE_OTG_FS_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) -#define LINE_ARD_A3 PAL_LINE(GPIOB, 0U) -#define LINE_ADC1_IN8 PAL_LINE(GPIOB, 0U) -#define LINE_SWO PAL_LINE(GPIOB, 3U) -#define LINE_ARD_D3 PAL_LINE(GPIOB, 3U) -#define LINE_ARD_D5 PAL_LINE(GPIOB, 4U) -#define LINE_ARD_D4 PAL_LINE(GPIOB, 5U) -#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U) -#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U) -#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U) -#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U) -#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U) -#define LINE_ADC1_IN10 PAL_LINE(GPIOC, 0U) -#define LINE_ARD_A4 PAL_LINE(GPIOC, 1U) -#define LINE_ADC1_IN11 PAL_LINE(GPIOC, 1U) -#define LINE_ARD_D9 PAL_LINE(GPIOC, 7U) -#define LINE_BUTTON PAL_LINE(GPIOC, 13U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) -#define LINE_OSC_IN PAL_LINE(GPIOH, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOH, 1U) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n)*2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n)*2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n)*2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - ARD_A0 ADC1_IN0 (input pullup). - * PA1 - ARD_A1 ADC1_IN1 (input pullup). - * PA2 - ARD_D1 USART2_TX (alternate 7). - * PA3 - ARD_D0 USART2_RX (alternate 7). - * PA4 - ARD_A2 ADC1_IN4 (input pullup). - * PA5 - LED_GREEN ARD_D13 (output pushpull high). - * PA6 - ARD_D12 (input pullup). - * PA7 - ARD_D11 (input pullup). - * PA8 - ARD_D7 (input pullup). - * PA9 - ARD_D8 (input pullup). - * PA10 - ARD_D2 (input pullup). - * PA11 - OTG_FS_DM (alternate 10). - * PA12 - OTG_FS_DP (alternate 10). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | PIN_MODE_INPUT(GPIOA_ARD_A1) | PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | PIN_MODE_INPUT(GPIOA_ARD_A2) | PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | PIN_MODE_INPUT(GPIOA_ARD_D12) | PIN_MODE_INPUT(GPIOA_ARD_D11) | PIN_MODE_INPUT(GPIOA_ARD_D7) | PIN_MODE_INPUT(GPIOA_ARD_D8) | PIN_MODE_INPUT(GPIOA_ARD_D2) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_ARD_A0) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_A1) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D1) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D0) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_A2) | PIN_OTYPE_PUSHPULL(GPIOA_LED_GREEN) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D12) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D11) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D7) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D8) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D2) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_HIGH(GPIOA_ARD_A0) | PIN_OSPEED_HIGH(GPIOA_ARD_A1) | PIN_OSPEED_MEDIUM(GPIOA_ARD_D1) | PIN_OSPEED_MEDIUM(GPIOA_ARD_D0) | PIN_OSPEED_HIGH(GPIOA_ARD_A2) | PIN_OSPEED_MEDIUM(GPIOA_LED_GREEN) | PIN_OSPEED_HIGH(GPIOA_ARD_D12) | PIN_OSPEED_HIGH(GPIOA_ARD_D11) | PIN_OSPEED_HIGH(GPIOA_ARD_D7) | PIN_OSPEED_HIGH(GPIOA_ARD_D8) | PIN_OSPEED_HIGH(GPIOA_ARD_D2) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | PIN_PUPDR_PULLUP(GPIOA_ARD_D7) | PIN_PUPDR_PULLUP(GPIOA_ARD_D8) | PIN_PUPDR_PULLUP(GPIOA_ARD_D2) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | PIN_PUPDR_PULLUP(GPIOA_SWDIO) | PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_ARD_A0) | PIN_ODR_HIGH(GPIOA_ARD_A1) | PIN_ODR_HIGH(GPIOA_ARD_D1) | PIN_ODR_HIGH(GPIOA_ARD_D0) | PIN_ODR_HIGH(GPIOA_ARD_A2) | PIN_ODR_LOW(GPIOA_LED_GREEN) | PIN_ODR_HIGH(GPIOA_ARD_D12) | PIN_ODR_HIGH(GPIOA_ARD_D11) | PIN_ODR_HIGH(GPIOA_ARD_D7) | PIN_ODR_HIGH(GPIOA_ARD_D8) | PIN_ODR_HIGH(GPIOA_ARD_D2) | PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_ARD_A0, 0U) | PIN_AFIO_AF(GPIOA_ARD_A1, 0U) | PIN_AFIO_AF(GPIOA_ARD_D1, 7U) | PIN_AFIO_AF(GPIOA_ARD_D0, 7U) | PIN_AFIO_AF(GPIOA_ARD_A2, 0U) | PIN_AFIO_AF(GPIOA_LED_GREEN, 0U) | PIN_AFIO_AF(GPIOA_ARD_D12, 0U) | PIN_AFIO_AF(GPIOA_ARD_D11, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_ARD_D7, 0U) | PIN_AFIO_AF(GPIOA_ARD_D8, 0U) | PIN_AFIO_AF(GPIOA_ARD_D2, 0U) | PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - ARD_A3 ADC1_IN8 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - SWO ARD_D3 (alternate 0). - * PB4 - ARD_D5 (input pullup). - * PB5 - ARD_D4 (input pullup). - * PB6 - ARD_D10 (input pullup). - * PB7 - PIN7 (input pullup). - * PB8 - ARD_D15 (input pullup). - * PB9 - ARD_D14 (input pullup). - * PB10 - ARD_D6 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - PIN13 (input pullup). - * PB14 - PIN14 (input pullup). - * PB15 - PIN15 (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_ALTERNATE(GPIOB_SWO) | PIN_MODE_INPUT(GPIOB_ARD_D5) | PIN_MODE_INPUT(GPIOB_ARD_D4) | PIN_MODE_INPUT(GPIOB_ARD_D10) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_ARD_D15) | PIN_MODE_INPUT(GPIOB_ARD_D14) | PIN_MODE_INPUT(GPIOB_ARD_D6) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_INPUT(GPIOB_PIN13) | PIN_MODE_INPUT(GPIOB_PIN14) | PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_ARD_A3) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_SWO) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D5) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D4) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D10) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D15) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D14) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D6) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_HIGH(GPIOB_ARD_A3) | PIN_OSPEED_HIGH(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_SWO) | PIN_OSPEED_HIGH(GPIOB_ARD_D5) | PIN_OSPEED_HIGH(GPIOB_ARD_D4) | PIN_OSPEED_HIGH(GPIOB_ARD_D10) | PIN_OSPEED_HIGH(GPIOB_PIN7) | PIN_OSPEED_HIGH(GPIOB_ARD_D15) | PIN_OSPEED_HIGH(GPIOB_ARD_D14) | PIN_OSPEED_HIGH(GPIOB_ARD_D6) | PIN_OSPEED_HIGH(GPIOB_PIN11) | PIN_OSPEED_HIGH(GPIOB_PIN12) | PIN_OSPEED_HIGH(GPIOB_PIN13) | PIN_OSPEED_HIGH(GPIOB_PIN14) | PIN_OSPEED_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_SWO) | PIN_PUPDR_PULLUP(GPIOB_ARD_D5) | PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_PULLUP(GPIOB_PIN13) | PIN_PUPDR_PULLUP(GPIOB_PIN14) | PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_ARD_A3) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_SWO) | PIN_ODR_HIGH(GPIOB_ARD_D5) | PIN_ODR_HIGH(GPIOB_ARD_D4) | PIN_ODR_HIGH(GPIOB_ARD_D10) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_ARD_D15) | PIN_ODR_HIGH(GPIOB_ARD_D14) | PIN_ODR_HIGH(GPIOB_ARD_D6) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_PIN13) | PIN_ODR_HIGH(GPIOB_PIN14) | PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_ARD_A3, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_SWO, 0U) | PIN_AFIO_AF(GPIOB_ARD_D5, 0U) | PIN_AFIO_AF(GPIOB_ARD_D4, 0U) | PIN_AFIO_AF(GPIOB_ARD_D10, 0U) | PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0U) | PIN_AFIO_AF(GPIOB_ARD_D14, 0U) | PIN_AFIO_AF(GPIOB_ARD_D6, 0U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_PIN13, 0U) | PIN_AFIO_AF(GPIOB_PIN14, 0U) | PIN_AFIO_AF(GPIOB_PIN15, 0U)) - -/* - * GPIOC setup: - * - * PC0 - ARD_A5 ADC1_IN10 (input pullup). - * PC1 - ARD_A4 ADC1_IN11 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - PIN6 (input pullup). - * PC7 - ARD_D9 (input pullup). - * PC8 - PIN8 (input pullup). - * PC9 - PIN9 (input pullup). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - BUTTON (input floating). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | PIN_MODE_INPUT(GPIOC_ARD_A4) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_INPUT(GPIOC_PIN3) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_INPUT(GPIOC_PIN6) | PIN_MODE_INPUT(GPIOC_ARD_D9) | PIN_MODE_INPUT(GPIOC_PIN8) | PIN_MODE_INPUT(GPIOC_PIN9) | PIN_MODE_INPUT(GPIOC_PIN10) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_INPUT(GPIOC_PIN12) | PIN_MODE_INPUT(GPIOC_BUTTON) | PIN_MODE_INPUT(GPIOC_OSC32_IN) | PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_ARD_A5) | PIN_OTYPE_PUSHPULL(GPIOC_ARD_A4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | PIN_OTYPE_PUSHPULL(GPIOC_ARD_D9) | PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | PIN_OTYPE_PUSHPULL(GPIOC_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_ARD_A5) | PIN_OSPEED_HIGH(GPIOC_ARD_A4) | PIN_OSPEED_HIGH(GPIOC_PIN2) | PIN_OSPEED_HIGH(GPIOC_PIN3) | PIN_OSPEED_HIGH(GPIOC_PIN4) | PIN_OSPEED_HIGH(GPIOC_PIN5) | PIN_OSPEED_HIGH(GPIOC_PIN6) | PIN_OSPEED_HIGH(GPIOC_ARD_D9) | PIN_OSPEED_HIGH(GPIOC_PIN8) | PIN_OSPEED_HIGH(GPIOC_PIN9) | PIN_OSPEED_HIGH(GPIOC_PIN10) | PIN_OSPEED_HIGH(GPIOC_PIN11) | PIN_OSPEED_HIGH(GPIOC_PIN12) | PIN_OSPEED_HIGH(GPIOC_BUTTON) | PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_PULLUP(GPIOC_PIN3) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_PULLUP(GPIOC_PIN6) | PIN_PUPDR_PULLUP(GPIOC_ARD_D9) | PIN_PUPDR_PULLUP(GPIOC_PIN8) | PIN_PUPDR_PULLUP(GPIOC_PIN9) | PIN_PUPDR_PULLUP(GPIOC_PIN10) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_PIN12) | PIN_PUPDR_FLOATING(GPIOC_BUTTON) | PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_ARD_A5) | PIN_ODR_HIGH(GPIOC_ARD_A4) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_PIN3) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_HIGH(GPIOC_PIN6) | PIN_ODR_HIGH(GPIOC_ARD_D9) | PIN_ODR_HIGH(GPIOC_PIN8) | PIN_ODR_HIGH(GPIOC_PIN9) | PIN_ODR_HIGH(GPIOC_PIN10) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_PIN12) | PIN_ODR_HIGH(GPIOC_BUTTON) | PIN_ODR_HIGH(GPIOC_OSC32_IN) | PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_ARD_A5, 0U) | PIN_AFIO_AF(GPIOC_ARD_A4, 0U) | PIN_AFIO_AF(GPIOC_PIN2, 0U) | PIN_AFIO_AF(GPIOC_PIN3, 0U) | PIN_AFIO_AF(GPIOC_PIN4, 0U) | PIN_AFIO_AF(GPIOC_PIN5, 0U) | PIN_AFIO_AF(GPIOC_PIN6, 0U) | PIN_AFIO_AF(GPIOC_ARD_D9, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | PIN_AFIO_AF(GPIOC_PIN9, 0U) | PIN_AFIO_AF(GPIOC_PIN10, 0U) | PIN_AFIO_AF(GPIOC_PIN11, 0U) | PIN_AFIO_AF(GPIOC_PIN12, 0U) | PIN_AFIO_AF(GPIOC_BUTTON, 0U) | PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_INPUT(GPIOD_PIN4) | PIN_MODE_INPUT(GPIOD_PIN5) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_INPUT(GPIOD_PIN12) | PIN_MODE_INPUT(GPIOD_PIN13) | PIN_MODE_INPUT(GPIOD_PIN14) | PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | PIN_OSPEED_HIGH(GPIOD_PIN1) | PIN_OSPEED_HIGH(GPIOD_PIN2) | PIN_OSPEED_HIGH(GPIOD_PIN3) | PIN_OSPEED_HIGH(GPIOD_PIN4) | PIN_OSPEED_HIGH(GPIOD_PIN5) | PIN_OSPEED_HIGH(GPIOD_PIN6) | PIN_OSPEED_HIGH(GPIOD_PIN7) | PIN_OSPEED_HIGH(GPIOD_PIN8) | PIN_OSPEED_HIGH(GPIOD_PIN9) | PIN_OSPEED_HIGH(GPIOD_PIN10) | PIN_OSPEED_HIGH(GPIOD_PIN11) | PIN_OSPEED_HIGH(GPIOD_PIN12) | PIN_OSPEED_HIGH(GPIOD_PIN13) | PIN_OSPEED_HIGH(GPIOD_PIN14) | PIN_OSPEED_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_PIN4) | PIN_PUPDR_PULLUP(GPIOD_PIN5) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_PULLUP(GPIOD_PIN12) | PIN_PUPDR_PULLUP(GPIOD_PIN13) | PIN_PUPDR_PULLUP(GPIOD_PIN14) | PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_PIN4) | PIN_ODR_HIGH(GPIOD_PIN5) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_HIGH(GPIOD_PIN12) | PIN_ODR_HIGH(GPIOD_PIN13) | PIN_ODR_HIGH(GPIOD_PIN14) | PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | PIN_AFIO_AF(GPIOD_PIN1, 0U) | PIN_AFIO_AF(GPIOD_PIN2, 0U) | PIN_AFIO_AF(GPIOD_PIN3, 0U) | PIN_AFIO_AF(GPIOD_PIN4, 0U) | PIN_AFIO_AF(GPIOD_PIN5, 0U) | PIN_AFIO_AF(GPIOD_PIN6, 0U) | PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | PIN_AFIO_AF(GPIOD_PIN9, 0U) | PIN_AFIO_AF(GPIOD_PIN10, 0U) | PIN_AFIO_AF(GPIOD_PIN11, 0U) | PIN_AFIO_AF(GPIOD_PIN12, 0U) | PIN_AFIO_AF(GPIOD_PIN13, 0U) | PIN_AFIO_AF(GPIOD_PIN14, 0U) | PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | PIN_MODE_INPUT(GPIOE_PIN1) | PIN_MODE_INPUT(GPIOE_PIN2) | PIN_MODE_INPUT(GPIOE_PIN3) | PIN_MODE_INPUT(GPIOE_PIN4) | PIN_MODE_INPUT(GPIOE_PIN5) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_INPUT(GPIOE_PIN8) | PIN_MODE_INPUT(GPIOE_PIN9) | PIN_MODE_INPUT(GPIOE_PIN10) | PIN_MODE_INPUT(GPIOE_PIN11) | PIN_MODE_INPUT(GPIOE_PIN12) | PIN_MODE_INPUT(GPIOE_PIN13) | PIN_MODE_INPUT(GPIOE_PIN14) | PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_PIN0) | PIN_OSPEED_HIGH(GPIOE_PIN1) | PIN_OSPEED_HIGH(GPIOE_PIN2) | PIN_OSPEED_HIGH(GPIOE_PIN3) | PIN_OSPEED_HIGH(GPIOE_PIN4) | PIN_OSPEED_HIGH(GPIOE_PIN5) | PIN_OSPEED_HIGH(GPIOE_PIN6) | PIN_OSPEED_HIGH(GPIOE_PIN7) | PIN_OSPEED_HIGH(GPIOE_PIN8) | PIN_OSPEED_HIGH(GPIOE_PIN9) | PIN_OSPEED_HIGH(GPIOE_PIN10) | PIN_OSPEED_HIGH(GPIOE_PIN11) | PIN_OSPEED_HIGH(GPIOE_PIN12) | PIN_OSPEED_HIGH(GPIOE_PIN13) | PIN_OSPEED_HIGH(GPIOE_PIN14) | PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | PIN_PUPDR_PULLUP(GPIOE_PIN1) | PIN_PUPDR_PULLUP(GPIOE_PIN2) | PIN_PUPDR_PULLUP(GPIOE_PIN3) | PIN_PUPDR_PULLUP(GPIOE_PIN4) | PIN_PUPDR_PULLUP(GPIOE_PIN5) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_PULLUP(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_PULLUP(GPIOE_PIN13) | PIN_PUPDR_PULLUP(GPIOE_PIN14) | PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | PIN_ODR_HIGH(GPIOE_PIN1) | PIN_ODR_HIGH(GPIOE_PIN2) | PIN_ODR_HIGH(GPIOE_PIN3) | PIN_ODR_HIGH(GPIOE_PIN4) | PIN_ODR_HIGH(GPIOE_PIN5) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_HIGH(GPIOE_PIN8) | PIN_ODR_HIGH(GPIOE_PIN9) | PIN_ODR_HIGH(GPIOE_PIN10) | PIN_ODR_HIGH(GPIOE_PIN11) | PIN_ODR_HIGH(GPIOE_PIN12) | PIN_ODR_HIGH(GPIOE_PIN13) | PIN_ODR_HIGH(GPIOE_PIN14) | PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | PIN_AFIO_AF(GPIOE_PIN1, 0U) | PIN_AFIO_AF(GPIOE_PIN2, 0U) | PIN_AFIO_AF(GPIOE_PIN3, 0U) | PIN_AFIO_AF(GPIOE_PIN4, 0U) | PIN_AFIO_AF(GPIOE_PIN5, 0U) | PIN_AFIO_AF(GPIOE_PIN6, 0U) | PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | PIN_AFIO_AF(GPIOE_PIN9, 0U) | PIN_AFIO_AF(GPIOE_PIN10, 0U) | PIN_AFIO_AF(GPIOE_PIN11, 0U) | PIN_AFIO_AF(GPIOE_PIN12, 0U) | PIN_AFIO_AF(GPIOE_PIN13, 0U) | PIN_AFIO_AF(GPIOE_PIN14, 0U) | PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - PIN0 (input pullup). - * PF1 - PIN1 (input pullup). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | PIN_MODE_INPUT(GPIOF_PIN1) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | PIN_OSPEED_HIGH(GPIOF_PIN1) | PIN_OSPEED_HIGH(GPIOF_PIN2) | PIN_OSPEED_HIGH(GPIOF_PIN3) | PIN_OSPEED_HIGH(GPIOF_PIN4) | PIN_OSPEED_HIGH(GPIOF_PIN5) | PIN_OSPEED_HIGH(GPIOF_PIN6) | PIN_OSPEED_HIGH(GPIOF_PIN7) | PIN_OSPEED_HIGH(GPIOF_PIN8) | PIN_OSPEED_HIGH(GPIOF_PIN9) | PIN_OSPEED_HIGH(GPIOF_PIN10) | PIN_OSPEED_HIGH(GPIOF_PIN11) | PIN_OSPEED_HIGH(GPIOF_PIN12) | PIN_OSPEED_HIGH(GPIOF_PIN13) | PIN_OSPEED_HIGH(GPIOF_PIN14) | PIN_OSPEED_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | PIN_PUPDR_PULLUP(GPIOF_PIN1) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | PIN_ODR_HIGH(GPIOF_PIN1) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | PIN_AFIO_AF(GPIOF_PIN1, 0U) | PIN_AFIO_AF(GPIOF_PIN2, 0U) | PIN_AFIO_AF(GPIOF_PIN3, 0U) | PIN_AFIO_AF(GPIOF_PIN4, 0U) | PIN_AFIO_AF(GPIOF_PIN5, 0U) | PIN_AFIO_AF(GPIOF_PIN6, 0U) | PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | PIN_AFIO_AF(GPIOF_PIN9, 0U) | PIN_AFIO_AF(GPIOF_PIN10, 0U) | PIN_AFIO_AF(GPIOF_PIN11, 0U) | PIN_AFIO_AF(GPIOF_PIN12, 0U) | PIN_AFIO_AF(GPIOF_PIN13, 0U) | PIN_AFIO_AF(GPIOF_PIN14, 0U) | PIN_AFIO_AF(GPIOF_PIN15, 0U)) - -/* - * GPIOG setup: - * - * PG0 - PIN0 (input pullup). - * PG1 - PIN1 (input pullup). - * PG2 - PIN2 (input pullup). - * PG3 - PIN3 (input pullup). - * PG4 - PIN4 (input pullup). - * PG5 - PIN5 (input pullup). - * PG6 - PIN6 (input pullup). - * PG7 - PIN7 (input pullup). - * PG8 - PIN8 (input pullup). - * PG9 - PIN9 (input pullup). - * PG10 - PIN10 (input pullup). - * PG11 - PIN11 (input pullup). - * PG12 - PIN12 (input pullup). - * PG13 - PIN13 (input pullup). - * PG14 - PIN14 (input pullup). - * PG15 - PIN15 (input pullup). - */ -#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | PIN_MODE_INPUT(GPIOG_PIN1) | PIN_MODE_INPUT(GPIOG_PIN2) | PIN_MODE_INPUT(GPIOG_PIN3) | PIN_MODE_INPUT(GPIOG_PIN4) | PIN_MODE_INPUT(GPIOG_PIN5) | PIN_MODE_INPUT(GPIOG_PIN6) | PIN_MODE_INPUT(GPIOG_PIN7) | PIN_MODE_INPUT(GPIOG_PIN8) | PIN_MODE_INPUT(GPIOG_PIN9) | PIN_MODE_INPUT(GPIOG_PIN10) | PIN_MODE_INPUT(GPIOG_PIN11) | PIN_MODE_INPUT(GPIOG_PIN12) | PIN_MODE_INPUT(GPIOG_PIN13) | PIN_MODE_INPUT(GPIOG_PIN14) | PIN_MODE_INPUT(GPIOG_PIN15)) -#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) -#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | PIN_OSPEED_HIGH(GPIOG_PIN1) | PIN_OSPEED_HIGH(GPIOG_PIN2) | PIN_OSPEED_HIGH(GPIOG_PIN3) | PIN_OSPEED_HIGH(GPIOG_PIN4) | PIN_OSPEED_HIGH(GPIOG_PIN5) | PIN_OSPEED_HIGH(GPIOG_PIN6) | PIN_OSPEED_HIGH(GPIOG_PIN7) | PIN_OSPEED_HIGH(GPIOG_PIN8) | PIN_OSPEED_HIGH(GPIOG_PIN9) | PIN_OSPEED_HIGH(GPIOG_PIN10) | PIN_OSPEED_HIGH(GPIOG_PIN11) | PIN_OSPEED_HIGH(GPIOG_PIN12) | PIN_OSPEED_HIGH(GPIOG_PIN13) | PIN_OSPEED_HIGH(GPIOG_PIN14) | PIN_OSPEED_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | PIN_PUPDR_PULLUP(GPIOG_PIN1) | PIN_PUPDR_PULLUP(GPIOG_PIN2) | PIN_PUPDR_PULLUP(GPIOG_PIN3) | PIN_PUPDR_PULLUP(GPIOG_PIN4) | PIN_PUPDR_PULLUP(GPIOG_PIN5) | PIN_PUPDR_PULLUP(GPIOG_PIN6) | PIN_PUPDR_PULLUP(GPIOG_PIN7) | PIN_PUPDR_PULLUP(GPIOG_PIN8) | PIN_PUPDR_PULLUP(GPIOG_PIN9) | PIN_PUPDR_PULLUP(GPIOG_PIN10) | PIN_PUPDR_PULLUP(GPIOG_PIN11) | PIN_PUPDR_PULLUP(GPIOG_PIN12) | PIN_PUPDR_PULLUP(GPIOG_PIN13) | PIN_PUPDR_PULLUP(GPIOG_PIN14) | PIN_PUPDR_PULLUP(GPIOG_PIN15)) -#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | PIN_ODR_HIGH(GPIOG_PIN1) | PIN_ODR_HIGH(GPIOG_PIN2) | PIN_ODR_HIGH(GPIOG_PIN3) | PIN_ODR_HIGH(GPIOG_PIN4) | PIN_ODR_HIGH(GPIOG_PIN5) | PIN_ODR_HIGH(GPIOG_PIN6) | PIN_ODR_HIGH(GPIOG_PIN7) | PIN_ODR_HIGH(GPIOG_PIN8) | PIN_ODR_HIGH(GPIOG_PIN9) | PIN_ODR_HIGH(GPIOG_PIN10) | PIN_ODR_HIGH(GPIOG_PIN11) | PIN_ODR_HIGH(GPIOG_PIN12) | PIN_ODR_HIGH(GPIOG_PIN13) | PIN_ODR_HIGH(GPIOG_PIN14) | PIN_ODR_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | PIN_AFIO_AF(GPIOG_PIN1, 0U) | PIN_AFIO_AF(GPIOG_PIN2, 0U) | PIN_AFIO_AF(GPIOG_PIN3, 0U) | PIN_AFIO_AF(GPIOG_PIN4, 0U) | PIN_AFIO_AF(GPIOG_PIN5, 0U) | PIN_AFIO_AF(GPIOG_PIN6, 0U) | PIN_AFIO_AF(GPIOG_PIN7, 0U)) -#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | PIN_AFIO_AF(GPIOG_PIN9, 0U) | PIN_AFIO_AF(GPIOG_PIN10, 0U) | PIN_AFIO_AF(GPIOG_PIN11, 0U) | PIN_AFIO_AF(GPIOG_PIN12, 0U) | PIN_AFIO_AF(GPIOG_PIN13, 0U) | PIN_AFIO_AF(GPIOG_PIN14, 0U) | PIN_AFIO_AF(GPIOG_PIN15, 0U)) - -/* - * GPIOH setup: - * - * PH0 - OSC_IN (input floating). - * PH1 - OSC_OUT (input floating). - * PH2 - PIN2 (input pullup). - * PH3 - PIN3 (input pullup). - * PH4 - PIN4 (input pullup). - * PH5 - PIN5 (input pullup). - * PH6 - PIN6 (input pullup). - * PH7 - PIN7 (input pullup). - * PH8 - PIN8 (input pullup). - * PH9 - PIN9 (input pullup). - * PH10 - PIN10 (input pullup). - * PH11 - PIN11 (input pullup). - * PH12 - PIN12 (input pullup). - * PH13 - PIN13 (input pullup). - * PH14 - PIN14 (input pullup). - * PH15 - PIN15 (input pullup). - */ -#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | PIN_MODE_INPUT(GPIOH_OSC_OUT) | PIN_MODE_INPUT(GPIOH_PIN2) | PIN_MODE_INPUT(GPIOH_PIN3) | PIN_MODE_INPUT(GPIOH_PIN4) | PIN_MODE_INPUT(GPIOH_PIN5) | PIN_MODE_INPUT(GPIOH_PIN6) | PIN_MODE_INPUT(GPIOH_PIN7) | PIN_MODE_INPUT(GPIOH_PIN8) | PIN_MODE_INPUT(GPIOH_PIN9) | PIN_MODE_INPUT(GPIOH_PIN10) | PIN_MODE_INPUT(GPIOH_PIN11) | PIN_MODE_INPUT(GPIOH_PIN12) | PIN_MODE_INPUT(GPIOH_PIN13) | PIN_MODE_INPUT(GPIOH_PIN14) | PIN_MODE_INPUT(GPIOH_PIN15)) -#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) -#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | PIN_OSPEED_HIGH(GPIOH_PIN2) | PIN_OSPEED_HIGH(GPIOH_PIN3) | PIN_OSPEED_HIGH(GPIOH_PIN4) | PIN_OSPEED_HIGH(GPIOH_PIN5) | PIN_OSPEED_HIGH(GPIOH_PIN6) | PIN_OSPEED_HIGH(GPIOH_PIN7) | PIN_OSPEED_HIGH(GPIOH_PIN8) | PIN_OSPEED_HIGH(GPIOH_PIN9) | PIN_OSPEED_HIGH(GPIOH_PIN10) | PIN_OSPEED_HIGH(GPIOH_PIN11) | PIN_OSPEED_HIGH(GPIOH_PIN12) | PIN_OSPEED_HIGH(GPIOH_PIN13) | PIN_OSPEED_HIGH(GPIOH_PIN14) | PIN_OSPEED_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | PIN_PUPDR_PULLUP(GPIOH_PIN2) | PIN_PUPDR_PULLUP(GPIOH_PIN3) | PIN_PUPDR_PULLUP(GPIOH_PIN4) | PIN_PUPDR_PULLUP(GPIOH_PIN5) | PIN_PUPDR_PULLUP(GPIOH_PIN6) | PIN_PUPDR_PULLUP(GPIOH_PIN7) | PIN_PUPDR_PULLUP(GPIOH_PIN8) | PIN_PUPDR_PULLUP(GPIOH_PIN9) | PIN_PUPDR_PULLUP(GPIOH_PIN10) | PIN_PUPDR_PULLUP(GPIOH_PIN11) | PIN_PUPDR_PULLUP(GPIOH_PIN12) | PIN_PUPDR_PULLUP(GPIOH_PIN13) | PIN_PUPDR_PULLUP(GPIOH_PIN14) | PIN_PUPDR_PULLUP(GPIOH_PIN15)) -#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | PIN_ODR_HIGH(GPIOH_OSC_OUT) | PIN_ODR_HIGH(GPIOH_PIN2) | PIN_ODR_HIGH(GPIOH_PIN3) | PIN_ODR_HIGH(GPIOH_PIN4) | PIN_ODR_HIGH(GPIOH_PIN5) | PIN_ODR_HIGH(GPIOH_PIN6) | PIN_ODR_HIGH(GPIOH_PIN7) | PIN_ODR_HIGH(GPIOH_PIN8) | PIN_ODR_HIGH(GPIOH_PIN9) | PIN_ODR_HIGH(GPIOH_PIN10) | PIN_ODR_HIGH(GPIOH_PIN11) | PIN_ODR_HIGH(GPIOH_PIN12) | PIN_ODR_HIGH(GPIOH_PIN13) | PIN_ODR_HIGH(GPIOH_PIN14) | PIN_ODR_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | PIN_AFIO_AF(GPIOH_PIN2, 0U) | PIN_AFIO_AF(GPIOH_PIN3, 0U) | PIN_AFIO_AF(GPIOH_PIN4, 0U) | PIN_AFIO_AF(GPIOH_PIN5, 0U) | PIN_AFIO_AF(GPIOH_PIN6, 0U) | PIN_AFIO_AF(GPIOH_PIN7, 0U)) -#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | PIN_AFIO_AF(GPIOH_PIN9, 0U) | PIN_AFIO_AF(GPIOH_PIN10, 0U) | PIN_AFIO_AF(GPIOH_PIN11, 0U) | PIN_AFIO_AF(GPIOH_PIN12, 0U) | PIN_AFIO_AF(GPIOH_PIN13, 0U) | PIN_AFIO_AF(GPIOH_PIN14, 0U) | PIN_AFIO_AF(GPIOH_PIN15, 0U)) - -/* - * GPIOI setup: - * - * PI0 - PIN0 (input pullup). - * PI1 - PIN1 (input pullup). - * PI2 - PIN2 (input pullup). - * PI3 - PIN3 (input pullup). - * PI4 - PIN4 (input pullup). - * PI5 - PIN5 (input pullup). - * PI6 - PIN6 (input pullup). - * PI7 - PIN7 (input pullup). - * PI8 - PIN8 (input pullup). - * PI9 - PIN9 (input pullup). - * PI10 - PIN10 (input pullup). - * PI11 - PIN11 (input pullup). - * PI12 - PIN12 (input pullup). - * PI13 - PIN13 (input pullup). - * PI14 - PIN14 (input pullup). - * PI15 - PIN15 (input pullup). - */ -#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | PIN_MODE_INPUT(GPIOI_PIN1) | PIN_MODE_INPUT(GPIOI_PIN2) | PIN_MODE_INPUT(GPIOI_PIN3) | PIN_MODE_INPUT(GPIOI_PIN4) | PIN_MODE_INPUT(GPIOI_PIN5) | PIN_MODE_INPUT(GPIOI_PIN6) | PIN_MODE_INPUT(GPIOI_PIN7) | PIN_MODE_INPUT(GPIOI_PIN8) | PIN_MODE_INPUT(GPIOI_PIN9) | PIN_MODE_INPUT(GPIOI_PIN10) | PIN_MODE_INPUT(GPIOI_PIN11) | PIN_MODE_INPUT(GPIOI_PIN12) | PIN_MODE_INPUT(GPIOI_PIN13) | PIN_MODE_INPUT(GPIOI_PIN14) | PIN_MODE_INPUT(GPIOI_PIN15)) -#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | PIN_OTYPE_PUSHPULL(GPIOI_PIN15)) -#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | PIN_OSPEED_HIGH(GPIOI_PIN1) | PIN_OSPEED_HIGH(GPIOI_PIN2) | PIN_OSPEED_HIGH(GPIOI_PIN3) | PIN_OSPEED_HIGH(GPIOI_PIN4) | PIN_OSPEED_HIGH(GPIOI_PIN5) | PIN_OSPEED_HIGH(GPIOI_PIN6) | PIN_OSPEED_HIGH(GPIOI_PIN7) | PIN_OSPEED_HIGH(GPIOI_PIN8) | PIN_OSPEED_HIGH(GPIOI_PIN9) | PIN_OSPEED_HIGH(GPIOI_PIN10) | PIN_OSPEED_HIGH(GPIOI_PIN11) | PIN_OSPEED_HIGH(GPIOI_PIN12) | PIN_OSPEED_HIGH(GPIOI_PIN13) | PIN_OSPEED_HIGH(GPIOI_PIN14) | PIN_OSPEED_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | PIN_PUPDR_PULLUP(GPIOI_PIN1) | PIN_PUPDR_PULLUP(GPIOI_PIN2) | PIN_PUPDR_PULLUP(GPIOI_PIN3) | PIN_PUPDR_PULLUP(GPIOI_PIN4) | PIN_PUPDR_PULLUP(GPIOI_PIN5) | PIN_PUPDR_PULLUP(GPIOI_PIN6) | PIN_PUPDR_PULLUP(GPIOI_PIN7) | PIN_PUPDR_PULLUP(GPIOI_PIN8) | PIN_PUPDR_PULLUP(GPIOI_PIN9) | PIN_PUPDR_PULLUP(GPIOI_PIN10) | PIN_PUPDR_PULLUP(GPIOI_PIN11) | PIN_PUPDR_PULLUP(GPIOI_PIN12) | PIN_PUPDR_PULLUP(GPIOI_PIN13) | PIN_PUPDR_PULLUP(GPIOI_PIN14) | PIN_PUPDR_PULLUP(GPIOI_PIN15)) -#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | PIN_ODR_HIGH(GPIOI_PIN1) | PIN_ODR_HIGH(GPIOI_PIN2) | PIN_ODR_HIGH(GPIOI_PIN3) | PIN_ODR_HIGH(GPIOI_PIN4) | PIN_ODR_HIGH(GPIOI_PIN5) | PIN_ODR_HIGH(GPIOI_PIN6) | PIN_ODR_HIGH(GPIOI_PIN7) | PIN_ODR_HIGH(GPIOI_PIN8) | PIN_ODR_HIGH(GPIOI_PIN9) | PIN_ODR_HIGH(GPIOI_PIN10) | PIN_ODR_HIGH(GPIOI_PIN11) | PIN_ODR_HIGH(GPIOI_PIN12) | PIN_ODR_HIGH(GPIOI_PIN13) | PIN_ODR_HIGH(GPIOI_PIN14) | PIN_ODR_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | PIN_AFIO_AF(GPIOI_PIN1, 0U) | PIN_AFIO_AF(GPIOI_PIN2, 0U) | PIN_AFIO_AF(GPIOI_PIN3, 0U) | PIN_AFIO_AF(GPIOI_PIN4, 0U) | PIN_AFIO_AF(GPIOI_PIN5, 0U) | PIN_AFIO_AF(GPIOI_PIN6, 0U) | PIN_AFIO_AF(GPIOI_PIN7, 0U)) -#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | PIN_AFIO_AF(GPIOI_PIN9, 0U) | PIN_AFIO_AF(GPIOI_PIN10, 0U) | PIN_AFIO_AF(GPIOI_PIN11, 0U) | PIN_AFIO_AF(GPIOI_PIN12, 0U) | PIN_AFIO_AF(GPIOI_PIN13, 0U) | PIN_AFIO_AF(GPIOI_PIN14, 0U) | PIN_AFIO_AF(GPIOI_PIN15, 0U)) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(_FROM_ASM_) -# ifdef __cplusplus -extern "C" { -# endif -void boardInit(void); -# ifdef __cplusplus -} -# endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/drivers/boards/BLACKPILL_STM32_F411/board.mk b/drivers/boards/BLACKPILL_STM32_F411/board.mk deleted file mode 100644 index 93c1e62f5d..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F411/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/BLACKPILL_STM32_F411 - -# Shared variables -ALLCSRC += $(BOARDSRC) -ALLINC += $(BOARDINC) diff --git a/drivers/boards/BLACKPILL_STM32_F411/cfg/board.chcfg b/drivers/boards/BLACKPILL_STM32_F411/cfg/board.chcfg deleted file mode 100644 index 3095409cca..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/cfg/board.chcfg +++ /dev/null @@ -1,1193 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32F4xx board Template --> -<board - xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" - xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f4xx_board.xsd"> - <configuration_settings> - <templates_path>resources/gencfg/processors/boards/stm32f4xx/templates</templates_path> - <output_path>..</output_path> - <hal_version>5.0.x</hal_version> - </configuration_settings> - <board_name>STMicroelectronics STM32 Nucleo64-F411RE</board_name> - <board_id>ST_NUCLEO64_F411RE</board_id> - <board_functions></board_functions> - <subtype>STM32F411xE</subtype> - <clocks - HSEFrequency="8000000" - HSEBypass="true" - LSEFrequency="0" - LSEBypass="false" - VDD="300" /> - <ports> - <GPIOA> - <pin0 - ID="ARD_A0 ADC1_IN0" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="ARD_A1 ADC1_IN1" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="ARD_D1 USART2_TX" - Type="PushPull" - Level="High" - Speed="High" - Resistor="Floating" - Mode="Alternate" - Alternate="7" /> - <pin3 - ID="ARD_D0 USART2_RX" - Type="PushPull" - Level="High" - Speed="High" - Resistor="Floating" - Mode="Alternate" - Alternate="7" /> - <pin4 - ID="ARD_A2 ADC1_IN4" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="LED_GREEN ARD_D13" - Type="PushPull" - Level="Low" - Speed="High" - Resistor="Floating" - Mode="Output" - Alternate="0" /> - <pin6 - ID="ARD_D12" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="ARD_D11" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="ARD_D7" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="ARD_D8" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="ARD_D2" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="OTG_FS_DM" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="10" /> - <pin12 - ID="OTG_FS_DP" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="10" /> - <pin13 - ID="SWDIO" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SWCLK" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullDown" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOA> - <GPIOB> - <pin0 - ID="ARD_A3 ADC1_IN8" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="SWO ARD_D3" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Alternate" - Alternate="0" /> - <pin4 - ID="ARD_D5" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="ARD_D4" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="ARD_D10" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="ARD_D15" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="ARD_D14" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="ARD_D6" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOB> - <GPIOC> - <pin0 - ID="ARD_A5 ADC1_IN10" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="ARD_A4 ADC1_IN11" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="ARD_D9" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="BUTTON" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin14 - ID="OSC32_IN" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin15 - ID="OSC32_OUT" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - </GPIOC> - <GPIOD> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOD> - <GPIOE> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOE> - <GPIOF> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOF> - <GPIOG> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOG> - <GPIOH> - <pin0 - ID="OSC_IN" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin1 - ID="OSC_OUT" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="Floating" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOH> - <GPIOI> - <pin0 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Level="High" - Speed="Maximum" - Resistor="PullUp" - Mode="Input" - Alternate="0" /> - </GPIOI> - </ports> -</board> diff --git a/drivers/boards/BLACKPILL_STM32_F411/cfg/board.fmpp b/drivers/boards/BLACKPILL_STM32_F411/cfg/board.fmpp deleted file mode 100644 index 41754c1414..0000000000 --- a/drivers/boards/BLACKPILL_STM32_F411/cfg/board.fmpp +++ /dev/null @@ -1,15 +0,0 @@ -sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f4xx/templates -outputRoot: .. -dataRoot: . - -freemarkerLinks: { - lib: ../../../../../tools/ftl/libs -} - -data : { - doc1:xml ( - board.chcfg - { - } - ) -} diff --git a/drivers/boards/GENERIC_STM32_F072XB/board.c b/drivers/boards/GENERIC_STM32_F072XB/board.c deleted file mode 100644 index c91136e8f6..0000000000 --- a/drivers/boards/GENERIC_STM32_F072XB/board.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" -#include "stm32_gpio.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB(STM32_GPIO_EN_MASK); - rccEnableAHB(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) {} diff --git a/drivers/boards/GENERIC_STM32_F072XB/board.h b/drivers/boards/GENERIC_STM32_F072XB/board.h deleted file mode 100644 index 87570e62d2..0000000000 --- a/drivers/boards/GENERIC_STM32_F072XB/board.h +++ /dev/null @@ -1,407 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/* - * Setup for Generic STM32_F072 Board - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F072XB -#define BOARD_NAME "STM32_F072" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -# define STM32_LSECLK 0U -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -# define STM32_HSECLK 0U -#endif - -#define STM32_HSE_BYPASS - -/* - * MCU type as defined in the ST header. - */ -#define STM32F072xB - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_PIN4 4U -#define GPIOA_PIN5 5U -#define GPIOA_PIN6 6U -#define GPIOA_PIN7 7U -#define GPIOA_PIN8 8U -#define GPIOA_PIN9 9U -#define GPIOA_PIN10 10U -#define GPIOA_USB_DM 11U -#define GPIOA_USB_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_PIN3 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_PIN6 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_SPI2_SCK 13U -#define GPIOB_SPI2_MISO 14U -#define GPIOB_SPI2_MOSI 15U - -#define GPIOC_MEMS_CS 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_LED_RED 6U -#define GPIOC_LED_BLUE 7U -#define GPIOC_LED_ORANGE 8U -#define GPIOC_LED_GREEN 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_OSC_IN 0U -#define GPIOF_OSC_OUT 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_BUTTON PAL_LINE(GPIOA, 0U) -#define LINE_USB_DM PAL_LINE(GPIOA, 11U) -#define LINE_USB_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) -#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U) -#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U) -#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U) -#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U) -#define LINE_LED_RED PAL_LINE(GPIOC, 6U) -#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U) -#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U) -#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) -#define LINE_OSC_IN PAL_LINE(GPIOF, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n)*2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n)*2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n)*2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - BUTTON (input floating). - * PA1 - PIN1 (input pullup). - * PA2 - PIN2 (input pullup). - * PA3 - PIN3 (input pullup). - * PA4 - PIN4 (input pullup). - * PA5 - PIN5 (input pullup). - * PA6 - PIN6 (input pullup). - * PA7 - PIN7 (input pullup). - * PA8 - PIN8 (input pullup). - * PA9 - PIN9 (input pullup). - * PA10 - PIN10 (input pullup). - * PA11 - USB_DM (input floating). - * PA12 - USB_DP (input floating). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | PIN_MODE_INPUT(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_INPUT(GPIOA_PIN4) | PIN_MODE_INPUT(GPIOA_PIN5) | PIN_MODE_INPUT(GPIOA_PIN6) | PIN_MODE_INPUT(GPIOA_PIN7) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_PIN9) | PIN_MODE_INPUT(GPIOA_PIN10) | PIN_MODE_INPUT(GPIOA_USB_DM) | PIN_MODE_INPUT(GPIOA_USB_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | PIN_OSPEED_VERYLOW(GPIOA_PIN1) | PIN_OSPEED_VERYLOW(GPIOA_PIN2) | PIN_OSPEED_VERYLOW(GPIOA_PIN3) | PIN_OSPEED_VERYLOW(GPIOA_PIN4) | PIN_OSPEED_VERYLOW(GPIOA_PIN5) | PIN_OSPEED_VERYLOW(GPIOA_PIN6) | PIN_OSPEED_VERYLOW(GPIOA_PIN7) | PIN_OSPEED_VERYLOW(GPIOA_PIN8) | PIN_OSPEED_VERYLOW(GPIOA_PIN9) | PIN_OSPEED_VERYLOW(GPIOA_PIN10) | PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | PIN_PUPDR_PULLUP(GPIOA_PIN1) | PIN_PUPDR_PULLUP(GPIOA_PIN2) | PIN_PUPDR_PULLUP(GPIOA_PIN3) | PIN_PUPDR_PULLUP(GPIOA_PIN4) | PIN_PUPDR_PULLUP(GPIOA_PIN5) | PIN_PUPDR_PULLUP(GPIOA_PIN6) | PIN_PUPDR_PULLUP(GPIOA_PIN7) | PIN_PUPDR_PULLUP(GPIOA_PIN8) | PIN_PUPDR_PULLUP(GPIOA_PIN9) | PIN_PUPDR_PULLUP(GPIOA_PIN10) | PIN_PUPDR_FLOATING(GPIOA_USB_DM) | PIN_PUPDR_FLOATING(GPIOA_USB_DP) | PIN_PUPDR_PULLUP(GPIOA_SWDIO) | PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | PIN_ODR_HIGH(GPIOA_PIN1) | PIN_ODR_HIGH(GPIOA_PIN2) | PIN_ODR_HIGH(GPIOA_PIN3) | PIN_ODR_HIGH(GPIOA_PIN4) | PIN_ODR_HIGH(GPIOA_PIN5) | PIN_ODR_HIGH(GPIOA_PIN6) | PIN_ODR_HIGH(GPIOA_PIN7) | PIN_ODR_HIGH(GPIOA_PIN8) | PIN_ODR_HIGH(GPIOA_PIN9) | PIN_ODR_HIGH(GPIOA_PIN10) | PIN_ODR_HIGH(GPIOA_USB_DM) | PIN_ODR_HIGH(GPIOA_USB_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | PIN_AFIO_AF(GPIOA_PIN1, 0U) | PIN_AFIO_AF(GPIOA_PIN2, 0U) | PIN_AFIO_AF(GPIOA_PIN3, 0U) | PIN_AFIO_AF(GPIOA_PIN4, 0U) | PIN_AFIO_AF(GPIOA_PIN5, 0U) | PIN_AFIO_AF(GPIOA_PIN6, 0U) | PIN_AFIO_AF(GPIOA_PIN7, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | PIN_AFIO_AF(GPIOA_PIN9, 0U) | PIN_AFIO_AF(GPIOA_PIN10, 0U) | PIN_AFIO_AF(GPIOA_USB_DM, 0U) | PIN_AFIO_AF(GPIOA_USB_DP, 0U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - PIN3 (input pullup). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - PIN6 (input pullup). - * PB7 - PIN7 (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - SPI2_SCK (alternate 0). - * PB14 - SPI2_MISO (alternate 0). - * PB15 - SPI2_MOSI (alternate 0). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_INPUT(GPIOB_PIN3) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_INPUT(GPIOB_PIN6) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_INPUT(GPIOB_PIN9) | PIN_MODE_INPUT(GPIOB_PIN10) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | PIN_OSPEED_VERYLOW(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_PIN3) | PIN_OSPEED_HIGH(GPIOB_PIN4) | PIN_OSPEED_VERYLOW(GPIOB_PIN5) | PIN_OSPEED_VERYLOW(GPIOB_PIN6) | PIN_OSPEED_VERYLOW(GPIOB_PIN7) | PIN_OSPEED_VERYLOW(GPIOB_PIN8) | PIN_OSPEED_VERYLOW(GPIOB_PIN9) | PIN_OSPEED_VERYLOW(GPIOB_PIN10) | PIN_OSPEED_VERYLOW(GPIOB_PIN11) | PIN_OSPEED_VERYLOW(GPIOB_PIN12) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_PIN3) | PIN_PUPDR_PULLUP(GPIOB_PIN4) | PIN_PUPDR_PULLUP(GPIOB_PIN5) | PIN_PUPDR_PULLUP(GPIOB_PIN6) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_PIN8) | PIN_PUPDR_PULLUP(GPIOB_PIN9) | PIN_PUPDR_PULLUP(GPIOB_PIN10) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_PIN3) | PIN_ODR_HIGH(GPIOB_PIN4) | PIN_ODR_HIGH(GPIOB_PIN5) | PIN_ODR_HIGH(GPIOB_PIN6) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_PIN8) | PIN_ODR_HIGH(GPIOB_PIN9) | PIN_ODR_HIGH(GPIOB_PIN10) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_SPI2_SCK) | PIN_ODR_HIGH(GPIOB_SPI2_MISO) | PIN_ODR_HIGH(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_PIN3, 0U) | PIN_AFIO_AF(GPIOB_PIN4, 0U) | PIN_AFIO_AF(GPIOB_PIN5, 0U) | PIN_AFIO_AF(GPIOB_PIN6, 0U) | PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | PIN_AFIO_AF(GPIOB_PIN9, 0U) | PIN_AFIO_AF(GPIOB_PIN10, 0U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U)) - -/* - * GPIOC setup: - * - * PC0 - MEMS_CS (output pushpull maximum). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - LED_RED (output pushpull maximum). - * PC7 - LED_BLUE (output pushpull maximum). - * PC8 - LED_ORANGE (output pushpull maximum). - * PC9 - LED_GREEN (output pushpull maximum). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | PIN_MODE_INPUT(GPIOC_PIN1) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_INPUT(GPIOC_PIN3) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_OUTPUT(GPIOC_LED_RED) | PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | PIN_MODE_INPUT(GPIOC_PIN10) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_INPUT(GPIOC_PIN12) | PIN_MODE_INPUT(GPIOC_PIN13) | PIN_MODE_INPUT(GPIOC_OSC32_IN) | PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | PIN_OSPEED_VERYLOW(GPIOC_PIN1) | PIN_OSPEED_VERYLOW(GPIOC_PIN2) | PIN_OSPEED_VERYLOW(GPIOC_PIN3) | PIN_OSPEED_VERYLOW(GPIOC_PIN4) | PIN_OSPEED_VERYLOW(GPIOC_PIN5) | PIN_OSPEED_HIGH(GPIOC_LED_RED) | PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | PIN_OSPEED_VERYLOW(GPIOC_PIN10) | PIN_OSPEED_VERYLOW(GPIOC_PIN11) | PIN_OSPEED_VERYLOW(GPIOC_PIN12) | PIN_OSPEED_VERYLOW(GPIOC_PIN13) | PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | PIN_PUPDR_PULLUP(GPIOC_PIN1) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_PULLUP(GPIOC_PIN3) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_FLOATING(GPIOC_LED_RED) | PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | PIN_PUPDR_PULLUP(GPIOC_PIN10) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_PIN12) | PIN_PUPDR_PULLUP(GPIOC_PIN13) | PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | PIN_ODR_HIGH(GPIOC_PIN1) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_PIN3) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_LOW(GPIOC_LED_RED) | PIN_ODR_LOW(GPIOC_LED_BLUE) | PIN_ODR_LOW(GPIOC_LED_ORANGE) | PIN_ODR_LOW(GPIOC_LED_GREEN) | PIN_ODR_HIGH(GPIOC_PIN10) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_PIN12) | PIN_ODR_HIGH(GPIOC_PIN13) | PIN_ODR_HIGH(GPIOC_OSC32_IN) | PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | PIN_AFIO_AF(GPIOC_PIN1, 0U) | PIN_AFIO_AF(GPIOC_PIN2, 0U) | PIN_AFIO_AF(GPIOC_PIN3, 0U) | PIN_AFIO_AF(GPIOC_PIN4, 0U) | PIN_AFIO_AF(GPIOC_PIN5, 0U) | PIN_AFIO_AF(GPIOC_LED_RED, 0U) | PIN_AFIO_AF(GPIOC_LED_BLUE, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | PIN_AFIO_AF(GPIOC_PIN10, 0U) | PIN_AFIO_AF(GPIOC_PIN11, 0U) | PIN_AFIO_AF(GPIOC_PIN12, 0U) | PIN_AFIO_AF(GPIOC_PIN13, 0U) | PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_INPUT(GPIOD_PIN4) | PIN_MODE_INPUT(GPIOD_PIN5) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_INPUT(GPIOD_PIN12) | PIN_MODE_INPUT(GPIOD_PIN13) | PIN_MODE_INPUT(GPIOD_PIN14) | PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | PIN_OSPEED_VERYLOW(GPIOD_PIN1) | PIN_OSPEED_VERYLOW(GPIOD_PIN2) | PIN_OSPEED_VERYLOW(GPIOD_PIN3) | PIN_OSPEED_VERYLOW(GPIOD_PIN4) | PIN_OSPEED_VERYLOW(GPIOD_PIN5) | PIN_OSPEED_VERYLOW(GPIOD_PIN6) | PIN_OSPEED_VERYLOW(GPIOD_PIN7) | PIN_OSPEED_VERYLOW(GPIOD_PIN8) | PIN_OSPEED_VERYLOW(GPIOD_PIN9) | PIN_OSPEED_VERYLOW(GPIOD_PIN10) | PIN_OSPEED_VERYLOW(GPIOD_PIN11) | PIN_OSPEED_VERYLOW(GPIOD_PIN12) | PIN_OSPEED_VERYLOW(GPIOD_PIN13) | PIN_OSPEED_VERYLOW(GPIOD_PIN14) | PIN_OSPEED_VERYLOW(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_PIN4) | PIN_PUPDR_PULLUP(GPIOD_PIN5) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_PULLUP(GPIOD_PIN12) | PIN_PUPDR_PULLUP(GPIOD_PIN13) | PIN_PUPDR_PULLUP(GPIOD_PIN14) | PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_PIN4) | PIN_ODR_HIGH(GPIOD_PIN5) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_HIGH(GPIOD_PIN12) | PIN_ODR_HIGH(GPIOD_PIN13) | PIN_ODR_HIGH(GPIOD_PIN14) | PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | PIN_AFIO_AF(GPIOD_PIN1, 0U) | PIN_AFIO_AF(GPIOD_PIN2, 0U) | PIN_AFIO_AF(GPIOD_PIN3, 0U) | PIN_AFIO_AF(GPIOD_PIN4, 0U) | PIN_AFIO_AF(GPIOD_PIN5, 0U) | PIN_AFIO_AF(GPIOD_PIN6, 0U) | PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | PIN_AFIO_AF(GPIOD_PIN9, 0U) | PIN_AFIO_AF(GPIOD_PIN10, 0U) | PIN_AFIO_AF(GPIOD_PIN11, 0U) | PIN_AFIO_AF(GPIOD_PIN12, 0U) | PIN_AFIO_AF(GPIOD_PIN13, 0U) | PIN_AFIO_AF(GPIOD_PIN14, 0U) | PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | PIN_MODE_INPUT(GPIOE_PIN1) | PIN_MODE_INPUT(GPIOE_PIN2) | PIN_MODE_INPUT(GPIOE_PIN3) | PIN_MODE_INPUT(GPIOE_PIN4) | PIN_MODE_INPUT(GPIOE_PIN5) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_INPUT(GPIOE_PIN8) | PIN_MODE_INPUT(GPIOE_PIN9) | PIN_MODE_INPUT(GPIOE_PIN10) | PIN_MODE_INPUT(GPIOE_PIN11) | PIN_MODE_INPUT(GPIOE_PIN12) | PIN_MODE_INPUT(GPIOE_PIN13) | PIN_MODE_INPUT(GPIOE_PIN14) | PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | PIN_OSPEED_VERYLOW(GPIOE_PIN1) | PIN_OSPEED_VERYLOW(GPIOE_PIN2) | PIN_OSPEED_VERYLOW(GPIOE_PIN3) | PIN_OSPEED_VERYLOW(GPIOE_PIN4) | PIN_OSPEED_VERYLOW(GPIOE_PIN5) | PIN_OSPEED_VERYLOW(GPIOE_PIN6) | PIN_OSPEED_VERYLOW(GPIOE_PIN7) | PIN_OSPEED_VERYLOW(GPIOE_PIN8) | PIN_OSPEED_VERYLOW(GPIOE_PIN9) | PIN_OSPEED_VERYLOW(GPIOE_PIN10) | PIN_OSPEED_VERYLOW(GPIOE_PIN11) | PIN_OSPEED_VERYLOW(GPIOE_PIN12) | PIN_OSPEED_VERYLOW(GPIOE_PIN13) | PIN_OSPEED_VERYLOW(GPIOE_PIN14) | PIN_OSPEED_VERYLOW(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | PIN_PUPDR_PULLUP(GPIOE_PIN1) | PIN_PUPDR_PULLUP(GPIOE_PIN2) | PIN_PUPDR_PULLUP(GPIOE_PIN3) | PIN_PUPDR_PULLUP(GPIOE_PIN4) | PIN_PUPDR_PULLUP(GPIOE_PIN5) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_PULLUP(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_PULLUP(GPIOE_PIN13) | PIN_PUPDR_PULLUP(GPIOE_PIN14) | PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | PIN_ODR_HIGH(GPIOE_PIN1) | PIN_ODR_HIGH(GPIOE_PIN2) | PIN_ODR_HIGH(GPIOE_PIN3) | PIN_ODR_HIGH(GPIOE_PIN4) | PIN_ODR_HIGH(GPIOE_PIN5) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_HIGH(GPIOE_PIN8) | PIN_ODR_HIGH(GPIOE_PIN9) | PIN_ODR_HIGH(GPIOE_PIN10) | PIN_ODR_HIGH(GPIOE_PIN11) | PIN_ODR_HIGH(GPIOE_PIN12) | PIN_ODR_HIGH(GPIOE_PIN13) | PIN_ODR_HIGH(GPIOE_PIN14) | PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | PIN_AFIO_AF(GPIOE_PIN1, 0U) | PIN_AFIO_AF(GPIOE_PIN2, 0U) | PIN_AFIO_AF(GPIOE_PIN3, 0U) | PIN_AFIO_AF(GPIOE_PIN4, 0U) | PIN_AFIO_AF(GPIOE_PIN5, 0U) | PIN_AFIO_AF(GPIOE_PIN6, 0U) | PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | PIN_AFIO_AF(GPIOE_PIN9, 0U) | PIN_AFIO_AF(GPIOE_PIN10, 0U) | PIN_AFIO_AF(GPIOE_PIN11, 0U) | PIN_AFIO_AF(GPIOE_PIN12, 0U) | PIN_AFIO_AF(GPIOE_PIN13, 0U) | PIN_AFIO_AF(GPIOE_PIN14, 0U) | PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - OSC_IN (input floating). - * PF1 - OSC_OUT (input floating). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | PIN_MODE_INPUT(GPIOF_OSC_OUT) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | PIN_OSPEED_VERYLOW(GPIOF_PIN2) | PIN_OSPEED_VERYLOW(GPIOF_PIN3) | PIN_OSPEED_VERYLOW(GPIOF_PIN4) | PIN_OSPEED_VERYLOW(GPIOF_PIN5) | PIN_OSPEED_VERYLOW(GPIOF_PIN6) | PIN_OSPEED_VERYLOW(GPIOF_PIN7) | PIN_OSPEED_VERYLOW(GPIOF_PIN8) | PIN_OSPEED_VERYLOW(GPIOF_PIN9) | PIN_OSPEED_VERYLOW(GPIOF_PIN10) | PIN_OSPEED_VERYLOW(GPIOF_PIN11) | PIN_OSPEED_VERYLOW(GPIOF_PIN12) | PIN_OSPEED_VERYLOW(GPIOF_PIN13) | PIN_OSPEED_VERYLOW(GPIOF_PIN14) | PIN_OSPEED_VERYLOW(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | PIN_ODR_HIGH(GPIOF_OSC_OUT) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | PIN_AFIO_AF(GPIOF_PIN2, 0U) | PIN_AFIO_AF(GPIOF_PIN3, 0U) | PIN_AFIO_AF(GPIOF_PIN4, 0U) | PIN_AFIO_AF(GPIOF_PIN5, 0U) | PIN_AFIO_AF(GPIOF_PIN6, 0U) | PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | PIN_AFIO_AF(GPIOF_PIN9, 0U) | PIN_AFIO_AF(GPIOF_PIN10, 0U) | PIN_AFIO_AF(GPIOF_PIN11, 0U) | PIN_AFIO_AF(GPIOF_PIN12, 0U) | PIN_AFIO_AF(GPIOF_PIN13, 0U) | PIN_AFIO_AF(GPIOF_PIN14, 0U) | PIN_AFIO_AF(GPIOF_PIN15, 0U)) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(_FROM_ASM_) -# ifdef __cplusplus -extern "C" { -# endif -void boardInit(void); -# ifdef __cplusplus -} -# endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/drivers/boards/GENERIC_STM32_F072XB/board.mk b/drivers/boards/GENERIC_STM32_F072XB/board.mk deleted file mode 100644 index bd6f878269..0000000000 --- a/drivers/boards/GENERIC_STM32_F072XB/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F072XB/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F072XB - -# Shared variables -ALLCSRC += $(BOARDSRC) -ALLINC += $(BOARDINC) diff --git a/drivers/boards/GENERIC_STM32_F072XB/bootloader_defs.h b/drivers/boards/GENERIC_STM32_F072XB/bootloader_defs.h deleted file mode 100644 index 02c48c4e6d..0000000000 --- a/drivers/boards/GENERIC_STM32_F072XB/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/drivers/boards/GENERIC_STM32_F072XB/cfg/board.chcfg b/drivers/boards/GENERIC_STM32_F072XB/cfg/board.chcfg deleted file mode 100644 index e6ceecb62e..0000000000 --- a/drivers/boards/GENERIC_STM32_F072XB/cfg/board.chcfg +++ /dev/null @@ -1,703 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32F0xx board Template --> -<board - xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" - xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd"> - <configuration_settings> - <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path> - <output_path>..</output_path> - <hal_version>5.0.x</hal_version> - </configuration_settings> - <board_name>ST STM32F072B-Discovery</board_name> - <board_id>ST_STM32F072B_DISCOVERY</board_id> - <board_functions></board_functions> - <subtype>STM32F072xB</subtype> - <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0" - LSEBypass="false" LSEDrive="3 High Drive (default)" /> - <ports> - <GPIOA> - <pin0 - ID="BUTTON" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="USB_DM" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="USB_DP" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="SWDIO" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SWCLK" - Type="PushPull" - Speed="Maximum" - Resistor="PullDown" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOA> - <GPIOB> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="SPI2_SCK" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SPI2_MISO" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="SPI2_MOSI" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - </GPIOB> - <GPIOC> - <pin0 - ID="MEMS_CS" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Output" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="LED_RED" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin7 - ID="LED_BLUE" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin8 - ID="LED_ORANGE" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" ></pin8> - <pin9 - ID="LED_GREEN" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="OSC32_IN" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="OSC32_OUT" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOC> - <GPIOD> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOD> - <GPIOE> - <pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - </GPIOE> - <GPIOF> - <pin0 - ID="OSC_IN" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="OSC_OUT" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOF> - </ports> -</board> diff --git a/drivers/boards/GENERIC_STM32_F072XB/cfg/board.fmpp b/drivers/boards/GENERIC_STM32_F072XB/cfg/board.fmpp deleted file mode 100644 index 55cd396e41..0000000000 --- a/drivers/boards/GENERIC_STM32_F072XB/cfg/board.fmpp +++ /dev/null @@ -1,15 +0,0 @@ -sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f0xx/templates -outputRoot: .. -dataRoot: . - -freemarkerLinks: { - lib: ../../../../../tools/ftl/libs -} - -data : { - doc1:xml ( - board.chcfg - { - } - ) -} diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.c b/drivers/boards/GENERIC_STM32_F303XC/board.c deleted file mode 100644 index 9b0fc1b6b9..0000000000 --- a/drivers/boards/GENERIC_STM32_F303XC/board.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" -#include "stm32_gpio.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB(STM32_GPIO_EN_MASK); - rccEnableAHB(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -void enter_bootloader_mode_if_requested(void); - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) {} diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.h b/drivers/boards/GENERIC_STM32_F303XC/board.h deleted file mode 100644 index 3579c82770..0000000000 --- a/drivers/boards/GENERIC_STM32_F303XC/board.h +++ /dev/null @@ -1,475 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for Generic STM32_F303 Board - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F303XC -#define BOARD_NAME "STM32_F303" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - */ -#if !defined(STM32_LSECLK) -# define STM32_LSECLK 0U -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -# define STM32_HSECLK 8000000U -#endif - -// #define STM32_HSE_BYPASS - -/* - * MCU type as defined in the ST header. - */ -#define STM32F303xC - -/* - * IO pins assignments. - */ -#define GPIOA_PIN0 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_PIN4 4U -#define GPIOA_PIN5 5U -#define GPIOA_PIN6 6U -#define GPIOA_PIN7 7U -#define GPIOA_PIN8 8U -#define GPIOA_PIN9 9U -#define GPIOA_PIN10 10U -#define GPIOA_USB_DM 11U -#define GPIOA_USB_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_PIN3 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_PIN6 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_PIN13 13U -#define GPIOB_PIN14 14U -#define GPIOB_PIN15 15U - -#define GPIOC_PIN0 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_PIN6 6U -#define GPIOC_PIN7 7U -#define GPIOC_PIN8 8U -#define GPIOC_PIN9 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_PIN14 14U -#define GPIOC_PIN15 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_I2C2_SDA 0U -#define GPIOF_I2C2_SCL 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -#define GPIOG_PIN0 0U -#define GPIOG_PIN1 1U -#define GPIOG_PIN2 2U -#define GPIOG_PIN3 3U -#define GPIOG_PIN4 4U -#define GPIOG_PIN5 5U -#define GPIOG_PIN6 6U -#define GPIOG_PIN7 7U -#define GPIOG_PIN8 8U -#define GPIOG_PIN9 9U -#define GPIOG_PIN10 10U -#define GPIOG_PIN11 11U -#define GPIOG_PIN12 12U -#define GPIOG_PIN13 13U -#define GPIOG_PIN14 14U -#define GPIOG_PIN15 15U - -#define GPIOH_PIN0 0U -#define GPIOH_PIN1 1U -#define GPIOH_PIN2 2U -#define GPIOH_PIN3 3U -#define GPIOH_PIN4 4U -#define GPIOH_PIN5 5U -#define GPIOH_PIN6 6U -#define GPIOH_PIN7 7U -#define GPIOH_PIN8 8U -#define GPIOH_PIN9 9U -#define GPIOH_PIN10 10U -#define GPIOH_PIN11 11U -#define GPIOH_PIN12 12U -#define GPIOH_PIN13 13U -#define GPIOH_PIN14 14U -#define GPIOH_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U) -#define LINE_USB_DM PAL_LINE(GPIOA, 11U) -#define LINE_USB_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) - -#define LINE_PIN6 PAL_LINE(GPIOF, 0U) -#define LINE_PIN7 PAL_LINE(GPIOF, 1U) - -#define LINE_CAPS_LOCK PAL_LINE(GPIOB, 7U) - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n)*2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n)*2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n)*2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - NC - * PA1 - NC - * PA2 - COL1 - * PA3 - COL2 - * PA4 - SPEAKER1 - * PA5 - SPEAKER2 - * PA6 - COL3 - * PA7 - COL8 - * PA8 - COL6 - * PA9 - COL7 - * PA10 - ROW5 - * PA11 - USB_DM (alternate 14). - * PA12 - USB_DP (alternate 14). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - ROW4 - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | PIN_MODE_ALTERNATE(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_INPUT(GPIOA_PIN4) | PIN_MODE_INPUT(GPIOA_PIN5) | PIN_MODE_INPUT(GPIOA_PIN6) | PIN_MODE_INPUT(GPIOA_PIN7) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_PIN9) | PIN_MODE_INPUT(GPIOA_PIN10) | PIN_MODE_ALTERNATE(GPIOA_USB_DM) | PIN_MODE_ALTERNATE(GPIOA_USB_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | PIN_OSPEED_HIGH(GPIOA_PIN1) | PIN_OSPEED_VERYLOW(GPIOA_PIN2) | PIN_OSPEED_VERYLOW(GPIOA_PIN3) | PIN_OSPEED_VERYLOW(GPIOA_PIN4) | PIN_OSPEED_VERYLOW(GPIOA_PIN5) | PIN_OSPEED_VERYLOW(GPIOA_PIN6) | PIN_OSPEED_VERYLOW(GPIOA_PIN7) | PIN_OSPEED_VERYLOW(GPIOA_PIN8) | PIN_OSPEED_VERYLOW(GPIOA_PIN9) | PIN_OSPEED_VERYLOW(GPIOA_PIN10) | PIN_OSPEED_HIGH(GPIOA_USB_DM) | PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_VERYLOW(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | PIN_PUPDR_FLOATING(GPIOA_PIN1) | PIN_PUPDR_PULLUP(GPIOA_PIN2) | PIN_PUPDR_PULLUP(GPIOA_PIN3) | PIN_PUPDR_PULLUP(GPIOA_PIN4) | PIN_PUPDR_PULLUP(GPIOA_PIN5) | PIN_PUPDR_PULLUP(GPIOA_PIN6) | PIN_PUPDR_FLOATING(GPIOA_PIN7) | PIN_PUPDR_PULLUP(GPIOA_PIN8) | PIN_PUPDR_PULLUP(GPIOA_PIN9) | PIN_PUPDR_PULLUP(GPIOA_PIN10) | PIN_PUPDR_FLOATING(GPIOA_USB_DM) | PIN_PUPDR_FLOATING(GPIOA_USB_DP) | PIN_PUPDR_PULLUP(GPIOA_SWDIO) | PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | PIN_ODR_HIGH(GPIOA_PIN1) | PIN_ODR_HIGH(GPIOA_PIN2) | PIN_ODR_HIGH(GPIOA_PIN3) | PIN_ODR_HIGH(GPIOA_PIN4) | PIN_ODR_HIGH(GPIOA_PIN5) | PIN_ODR_HIGH(GPIOA_PIN6) | PIN_ODR_HIGH(GPIOA_PIN7) | PIN_ODR_HIGH(GPIOA_PIN8) | PIN_ODR_HIGH(GPIOA_PIN9) | PIN_ODR_HIGH(GPIOA_PIN10) | PIN_ODR_HIGH(GPIOA_USB_DM) | PIN_ODR_HIGH(GPIOA_USB_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | PIN_AFIO_AF(GPIOA_PIN1, 1) | PIN_AFIO_AF(GPIOA_PIN2, 0) | PIN_AFIO_AF(GPIOA_PIN3, 0) | PIN_AFIO_AF(GPIOA_PIN4, 0) | PIN_AFIO_AF(GPIOA_PIN5, 5) | PIN_AFIO_AF(GPIOA_PIN6, 5) | PIN_AFIO_AF(GPIOA_PIN7, 5)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | PIN_AFIO_AF(GPIOA_PIN9, 0) | PIN_AFIO_AF(GPIOA_PIN10, 0) | PIN_AFIO_AF(GPIOA_USB_DM, 14) | PIN_AFIO_AF(GPIOA_USB_DP, 14) | PIN_AFIO_AF(GPIOA_SWDIO, 0) | PIN_AFIO_AF(GPIOA_SWCLK, 0) | PIN_AFIO_AF(GPIOA_PIN15, 0)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - PIN3 (alternate 0). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - PIN6 LSM303DLHC_SCL (alternate 4). - * PB7 - PIN7 LSM303DLHC_SDA (alternate 4). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - PIN13 (input pullup). - * PB14 - PIN14 (input pullup). - * PB15 - PIN15 (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_ALTERNATE(GPIOB_PIN3) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_ALTERNATE(GPIOB_PIN6) | PIN_MODE_OUTPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_INPUT(GPIOB_PIN9) | PIN_MODE_INPUT(GPIOB_PIN10) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_INPUT(GPIOB_PIN13) | PIN_MODE_INPUT(GPIOB_PIN14) | PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | PIN_OSPEED_VERYLOW(GPIOB_PIN1) | PIN_OSPEED_VERYLOW(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_PIN3) | PIN_OSPEED_VERYLOW(GPIOB_PIN4) | PIN_OSPEED_VERYLOW(GPIOB_PIN5) | PIN_OSPEED_HIGH(GPIOB_PIN6) | PIN_OSPEED_VERYLOW(GPIOB_PIN7) | PIN_OSPEED_VERYLOW(GPIOB_PIN8) | PIN_OSPEED_VERYLOW(GPIOB_PIN9) | PIN_OSPEED_VERYLOW(GPIOB_PIN10) | PIN_OSPEED_VERYLOW(GPIOB_PIN11) | PIN_OSPEED_VERYLOW(GPIOB_PIN12) | PIN_OSPEED_VERYLOW(GPIOB_PIN13) | PIN_OSPEED_VERYLOW(GPIOB_PIN14) | PIN_OSPEED_VERYLOW(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_FLOATING(GPIOB_PIN3) | PIN_PUPDR_PULLUP(GPIOB_PIN4) | PIN_PUPDR_PULLUP(GPIOB_PIN5) | PIN_PUPDR_FLOATING(GPIOB_PIN6) | PIN_PUPDR_PULLDOWN(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_PIN8) | PIN_PUPDR_PULLUP(GPIOB_PIN9) | PIN_PUPDR_PULLUP(GPIOB_PIN10) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_PULLUP(GPIOB_PIN13) | PIN_PUPDR_PULLUP(GPIOB_PIN14) | PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_PIN3) | PIN_ODR_HIGH(GPIOB_PIN4) | PIN_ODR_HIGH(GPIOB_PIN5) | PIN_ODR_HIGH(GPIOB_PIN6) | PIN_ODR_LOW(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_PIN8) | PIN_ODR_HIGH(GPIOB_PIN9) | PIN_ODR_HIGH(GPIOB_PIN10) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_PIN13) | PIN_ODR_HIGH(GPIOB_PIN14) | PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | PIN_AFIO_AF(GPIOB_PIN1, 0) | PIN_AFIO_AF(GPIOB_PIN2, 0) | PIN_AFIO_AF(GPIOB_PIN3, 0) | PIN_AFIO_AF(GPIOB_PIN4, 0) | PIN_AFIO_AF(GPIOB_PIN5, 0) | PIN_AFIO_AF(GPIOB_PIN6, 4) | PIN_AFIO_AF(GPIOB_PIN7, 0)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | PIN_AFIO_AF(GPIOB_PIN9, 0) | PIN_AFIO_AF(GPIOB_PIN10, 0) | PIN_AFIO_AF(GPIOB_PIN11, 0) | PIN_AFIO_AF(GPIOB_PIN12, 0) | PIN_AFIO_AF(GPIOB_PIN13, 0) | PIN_AFIO_AF(GPIOB_PIN14, 0) | PIN_AFIO_AF(GPIOB_PIN15, 0)) - -/* - * GPIOC setup: - * - * PC0 - PIN0 (input pullup). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - PIN6 (input pullup). - * PC7 - PIN7 (input pullup). - * PC8 - PIN8 (input pullup). - * PC9 - PIN9 (input pullup). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - PIN14 (input floating). - * PC15 - PIN15 (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | PIN_MODE_INPUT(GPIOC_PIN1) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_INPUT(GPIOC_PIN3) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_INPUT(GPIOC_PIN6) | PIN_MODE_INPUT(GPIOC_PIN7) | PIN_MODE_INPUT(GPIOC_PIN8) | PIN_MODE_INPUT(GPIOC_PIN9) | PIN_MODE_INPUT(GPIOC_PIN10) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_INPUT(GPIOC_PIN12) | PIN_MODE_INPUT(GPIOC_PIN13) | PIN_MODE_INPUT(GPIOC_PIN14) | PIN_MODE_INPUT(GPIOC_PIN15)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | PIN_OSPEED_VERYLOW(GPIOC_PIN1) | PIN_OSPEED_VERYLOW(GPIOC_PIN2) | PIN_OSPEED_VERYLOW(GPIOC_PIN3) | PIN_OSPEED_VERYLOW(GPIOC_PIN4) | PIN_OSPEED_VERYLOW(GPIOC_PIN5) | PIN_OSPEED_VERYLOW(GPIOC_PIN6) | PIN_OSPEED_VERYLOW(GPIOC_PIN7) | PIN_OSPEED_VERYLOW(GPIOC_PIN8) | PIN_OSPEED_VERYLOW(GPIOC_PIN9) | PIN_OSPEED_VERYLOW(GPIOC_PIN10) | PIN_OSPEED_VERYLOW(GPIOC_PIN11) | PIN_OSPEED_VERYLOW(GPIOC_PIN12) | PIN_OSPEED_VERYLOW(GPIOC_PIN13) | PIN_OSPEED_HIGH(GPIOC_PIN14) | PIN_OSPEED_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | PIN_PUPDR_PULLUP(GPIOC_PIN1) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_PULLUP(GPIOC_PIN3) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_PULLUP(GPIOC_PIN6) | PIN_PUPDR_PULLUP(GPIOC_PIN7) | PIN_PUPDR_PULLUP(GPIOC_PIN8) | PIN_PUPDR_PULLUP(GPIOC_PIN9) | PIN_PUPDR_PULLUP(GPIOC_PIN10) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_PIN12) | PIN_PUPDR_PULLUP(GPIOC_PIN13) | PIN_PUPDR_FLOATING(GPIOC_PIN14) | PIN_PUPDR_FLOATING(GPIOC_PIN15)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | PIN_ODR_HIGH(GPIOC_PIN1) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_PIN3) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_HIGH(GPIOC_PIN6) | PIN_ODR_HIGH(GPIOC_PIN7) | PIN_ODR_HIGH(GPIOC_PIN8) | PIN_ODR_HIGH(GPIOC_PIN9) | PIN_ODR_HIGH(GPIOC_PIN10) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_PIN12) | PIN_ODR_HIGH(GPIOC_PIN13) | PIN_ODR_HIGH(GPIOC_PIN14) | PIN_ODR_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | PIN_AFIO_AF(GPIOC_PIN1, 0) | PIN_AFIO_AF(GPIOC_PIN2, 0) | PIN_AFIO_AF(GPIOC_PIN3, 0) | PIN_AFIO_AF(GPIOC_PIN4, 0) | PIN_AFIO_AF(GPIOC_PIN5, 0) | PIN_AFIO_AF(GPIOC_PIN6, 0) | PIN_AFIO_AF(GPIOC_PIN7, 0)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | PIN_AFIO_AF(GPIOC_PIN9, 0) | PIN_AFIO_AF(GPIOC_PIN10, 0) | PIN_AFIO_AF(GPIOC_PIN11, 0) | PIN_AFIO_AF(GPIOC_PIN12, 0) | PIN_AFIO_AF(GPIOC_PIN13, 0) | PIN_AFIO_AF(GPIOC_PIN14, 0) | PIN_AFIO_AF(GPIOC_PIN15, 0)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD11 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_INPUT(GPIOD_PIN4) | PIN_MODE_INPUT(GPIOD_PIN5) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_INPUT(GPIOD_PIN12) | PIN_MODE_INPUT(GPIOD_PIN13) | PIN_MODE_INPUT(GPIOD_PIN14) | PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | PIN_OSPEED_VERYLOW(GPIOD_PIN1) | PIN_OSPEED_VERYLOW(GPIOD_PIN2) | PIN_OSPEED_VERYLOW(GPIOD_PIN3) | PIN_OSPEED_VERYLOW(GPIOD_PIN4) | PIN_OSPEED_VERYLOW(GPIOD_PIN5) | PIN_OSPEED_VERYLOW(GPIOD_PIN6) | PIN_OSPEED_VERYLOW(GPIOD_PIN7) | PIN_OSPEED_VERYLOW(GPIOD_PIN8) | PIN_OSPEED_VERYLOW(GPIOD_PIN9) | PIN_OSPEED_VERYLOW(GPIOD_PIN10) | PIN_OSPEED_VERYLOW(GPIOD_PIN11) | PIN_OSPEED_VERYLOW(GPIOD_PIN12) | PIN_OSPEED_VERYLOW(GPIOD_PIN13) | PIN_OSPEED_VERYLOW(GPIOD_PIN14) | PIN_OSPEED_VERYLOW(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_PIN4) | PIN_PUPDR_PULLUP(GPIOD_PIN5) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_PULLUP(GPIOD_PIN12) | PIN_PUPDR_PULLUP(GPIOD_PIN13) | PIN_PUPDR_PULLUP(GPIOD_PIN14) | PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_PIN4) | PIN_ODR_HIGH(GPIOD_PIN5) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_HIGH(GPIOD_PIN12) | PIN_ODR_HIGH(GPIOD_PIN13) | PIN_ODR_HIGH(GPIOD_PIN14) | PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | PIN_AFIO_AF(GPIOD_PIN1, 0) | PIN_AFIO_AF(GPIOD_PIN2, 0) | PIN_AFIO_AF(GPIOD_PIN3, 0) | PIN_AFIO_AF(GPIOD_PIN4, 0) | PIN_AFIO_AF(GPIOD_PIN5, 0) | PIN_AFIO_AF(GPIOD_PIN6, 0) | PIN_AFIO_AF(GPIOD_PIN7, 0)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | PIN_AFIO_AF(GPIOD_PIN9, 0) | PIN_AFIO_AF(GPIOD_PIN10, 0) | PIN_AFIO_AF(GPIOD_PIN11, 0) | PIN_AFIO_AF(GPIOD_PIN12, 0) | PIN_AFIO_AF(GPIOD_PIN13, 0) | PIN_AFIO_AF(GPIOD_PIN14, 0) | PIN_AFIO_AF(GPIOD_PIN15, 0)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 L3GD20_CS (output pushpull maximum). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (output pushpull maximum). - * PE9 - PIN9 (output pushpull maximum). - * PE10 - PIN10 (output pushpull maximum). - * PE11 - PIN11 (output pushpull maximum). - * PE12 - PIN12 (output pushpull maximum). - * PE13 - PIN13 (output pushpull maximum). - * PE14 - PIN14 (output pushpull maximum). - * PE15 - PIN15 (output pushpull maximum). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | PIN_MODE_INPUT(GPIOE_PIN1) | PIN_MODE_INPUT(GPIOE_PIN2) | PIN_MODE_OUTPUT(GPIOE_PIN3) | PIN_MODE_INPUT(GPIOE_PIN4) | PIN_MODE_INPUT(GPIOE_PIN5) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_OUTPUT(GPIOE_PIN8) | PIN_MODE_OUTPUT(GPIOE_PIN9) | PIN_MODE_OUTPUT(GPIOE_PIN10) | PIN_MODE_OUTPUT(GPIOE_PIN11) | PIN_MODE_OUTPUT(GPIOE_PIN12) | PIN_MODE_OUTPUT(GPIOE_PIN13) | PIN_MODE_OUTPUT(GPIOE_PIN14) | PIN_MODE_OUTPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | PIN_OSPEED_VERYLOW(GPIOE_PIN1) | PIN_OSPEED_VERYLOW(GPIOE_PIN2) | PIN_OSPEED_HIGH(GPIOE_PIN3) | PIN_OSPEED_VERYLOW(GPIOE_PIN4) | PIN_OSPEED_VERYLOW(GPIOE_PIN5) | PIN_OSPEED_VERYLOW(GPIOE_PIN6) | PIN_OSPEED_VERYLOW(GPIOE_PIN7) | PIN_OSPEED_HIGH(GPIOE_PIN8) | PIN_OSPEED_HIGH(GPIOE_PIN9) | PIN_OSPEED_HIGH(GPIOE_PIN10) | PIN_OSPEED_HIGH(GPIOE_PIN11) | PIN_OSPEED_HIGH(GPIOE_PIN12) | PIN_OSPEED_HIGH(GPIOE_PIN13) | PIN_OSPEED_HIGH(GPIOE_PIN14) | PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | PIN_PUPDR_PULLUP(GPIOE_PIN1) | PIN_PUPDR_PULLUP(GPIOE_PIN2) | PIN_PUPDR_FLOATING(GPIOE_PIN3) | PIN_PUPDR_PULLUP(GPIOE_PIN4) | PIN_PUPDR_PULLUP(GPIOE_PIN5) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_FLOATING(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_FLOATING(GPIOE_PIN13) | PIN_PUPDR_FLOATING(GPIOE_PIN14) | PIN_PUPDR_FLOATING(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | PIN_ODR_HIGH(GPIOE_PIN1) | PIN_ODR_HIGH(GPIOE_PIN2) | PIN_ODR_HIGH(GPIOE_PIN3) | PIN_ODR_HIGH(GPIOE_PIN4) | PIN_ODR_HIGH(GPIOE_PIN5) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_LOW(GPIOE_PIN8) | PIN_ODR_LOW(GPIOE_PIN9) | PIN_ODR_LOW(GPIOE_PIN10) | PIN_ODR_LOW(GPIOE_PIN11) | PIN_ODR_LOW(GPIOE_PIN12) | PIN_ODR_LOW(GPIOE_PIN13) | PIN_ODR_LOW(GPIOE_PIN14) | PIN_ODR_LOW(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | PIN_AFIO_AF(GPIOE_PIN1, 0) | PIN_AFIO_AF(GPIOE_PIN2, 0) | PIN_AFIO_AF(GPIOE_PIN3, 0) | PIN_AFIO_AF(GPIOE_PIN4, 0) | PIN_AFIO_AF(GPIOE_PIN5, 0) | PIN_AFIO_AF(GPIOE_PIN6, 0) | PIN_AFIO_AF(GPIOE_PIN7, 0)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | PIN_AFIO_AF(GPIOE_PIN9, 0) | PIN_AFIO_AF(GPIOE_PIN10, 0) | PIN_AFIO_AF(GPIOE_PIN11, 0) | PIN_AFIO_AF(GPIOE_PIN12, 0) | PIN_AFIO_AF(GPIOE_PIN13, 0) | PIN_AFIO_AF(GPIOE_PIN14, 0) | PIN_AFIO_AF(GPIOE_PIN15, 0)) - -/* - * GPIOF setup: - * - * PF0 - I2C2_SDA (input floating). - * PF1 - I2C2_SCL (input floating). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_I2C2_SDA) | PIN_MODE_INPUT(GPIOF_I2C2_SCL) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) | PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) | PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) | PIN_OSPEED_VERYLOW(GPIOF_PIN2) | PIN_OSPEED_VERYLOW(GPIOF_PIN3) | PIN_OSPEED_VERYLOW(GPIOF_PIN4) | PIN_OSPEED_VERYLOW(GPIOF_PIN5) | PIN_OSPEED_VERYLOW(GPIOF_PIN6) | PIN_OSPEED_VERYLOW(GPIOF_PIN7) | PIN_OSPEED_VERYLOW(GPIOF_PIN8) | PIN_OSPEED_VERYLOW(GPIOF_PIN9) | PIN_OSPEED_VERYLOW(GPIOF_PIN10) | PIN_OSPEED_VERYLOW(GPIOF_PIN11) | PIN_OSPEED_VERYLOW(GPIOF_PIN12) | PIN_OSPEED_VERYLOW(GPIOF_PIN13) | PIN_OSPEED_VERYLOW(GPIOF_PIN14) | PIN_OSPEED_VERYLOW(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) | PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_I2C2_SDA) | PIN_ODR_HIGH(GPIOF_I2C2_SCL) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) | PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) | PIN_AFIO_AF(GPIOF_PIN2, 0) | PIN_AFIO_AF(GPIOF_PIN3, 0) | PIN_AFIO_AF(GPIOF_PIN4, 0) | PIN_AFIO_AF(GPIOF_PIN5, 0) | PIN_AFIO_AF(GPIOF_PIN6, 0) | PIN_AFIO_AF(GPIOF_PIN7, 0)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | PIN_AFIO_AF(GPIOF_PIN9, 0) | PIN_AFIO_AF(GPIOF_PIN10, 0) | PIN_AFIO_AF(GPIOF_PIN11, 0) | PIN_AFIO_AF(GPIOF_PIN12, 0) | PIN_AFIO_AF(GPIOF_PIN13, 0) | PIN_AFIO_AF(GPIOF_PIN14, 0) | PIN_AFIO_AF(GPIOF_PIN15, 0)) - -/* - * GPIOG setup: - * - * PG0 - PIN0 (input pullup). - * PG1 - PIN1 (input pullup). - * PG2 - PIN2 (input pullup). - * PG3 - PIN3 (input pullup). - * PG4 - PIN4 (input pullup). - * PG5 - PIN5 (input pullup). - * PG6 - PIN6 (input pullup). - * PG7 - PIN7 (input pullup). - * PG8 - PIN8 (input pullup). - * PG9 - PIN9 (input pullup). - * PG10 - PIN10 (input pullup). - * PG11 - PIN11 (input pullup). - * PG12 - PIN12 (input pullup). - * PG13 - PIN13 (input pullup). - * PG14 - PIN14 (input pullup). - * PG15 - PIN15 (input pullup). - */ -#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | PIN_MODE_INPUT(GPIOG_PIN1) | PIN_MODE_INPUT(GPIOG_PIN2) | PIN_MODE_INPUT(GPIOG_PIN3) | PIN_MODE_INPUT(GPIOG_PIN4) | PIN_MODE_INPUT(GPIOG_PIN5) | PIN_MODE_INPUT(GPIOG_PIN6) | PIN_MODE_INPUT(GPIOG_PIN7) | PIN_MODE_INPUT(GPIOG_PIN8) | PIN_MODE_INPUT(GPIOG_PIN9) | PIN_MODE_INPUT(GPIOG_PIN10) | PIN_MODE_INPUT(GPIOG_PIN11) | PIN_MODE_INPUT(GPIOG_PIN12) | PIN_MODE_INPUT(GPIOG_PIN13) | PIN_MODE_INPUT(GPIOG_PIN14) | PIN_MODE_INPUT(GPIOG_PIN15)) -#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) -#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOG_PIN0) | PIN_OSPEED_VERYLOW(GPIOG_PIN1) | PIN_OSPEED_VERYLOW(GPIOG_PIN2) | PIN_OSPEED_VERYLOW(GPIOG_PIN3) | PIN_OSPEED_VERYLOW(GPIOG_PIN4) | PIN_OSPEED_VERYLOW(GPIOG_PIN5) | PIN_OSPEED_VERYLOW(GPIOG_PIN6) | PIN_OSPEED_VERYLOW(GPIOG_PIN7) | PIN_OSPEED_VERYLOW(GPIOG_PIN8) | PIN_OSPEED_VERYLOW(GPIOG_PIN9) | PIN_OSPEED_VERYLOW(GPIOG_PIN10) | PIN_OSPEED_VERYLOW(GPIOG_PIN11) | PIN_OSPEED_VERYLOW(GPIOG_PIN12) | PIN_OSPEED_VERYLOW(GPIOG_PIN13) | PIN_OSPEED_VERYLOW(GPIOG_PIN14) | PIN_OSPEED_VERYLOW(GPIOG_PIN15)) -#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | PIN_PUPDR_PULLUP(GPIOG_PIN1) | PIN_PUPDR_PULLUP(GPIOG_PIN2) | PIN_PUPDR_PULLUP(GPIOG_PIN3) | PIN_PUPDR_PULLUP(GPIOG_PIN4) | PIN_PUPDR_PULLUP(GPIOG_PIN5) | PIN_PUPDR_PULLUP(GPIOG_PIN6) | PIN_PUPDR_PULLUP(GPIOG_PIN7) | PIN_PUPDR_PULLUP(GPIOG_PIN8) | PIN_PUPDR_PULLUP(GPIOG_PIN9) | PIN_PUPDR_PULLUP(GPIOG_PIN10) | PIN_PUPDR_PULLUP(GPIOG_PIN11) | PIN_PUPDR_PULLUP(GPIOG_PIN12) | PIN_PUPDR_PULLUP(GPIOG_PIN13) | PIN_PUPDR_PULLUP(GPIOG_PIN14) | PIN_PUPDR_PULLUP(GPIOG_PIN15)) -#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | PIN_ODR_HIGH(GPIOG_PIN1) | PIN_ODR_HIGH(GPIOG_PIN2) | PIN_ODR_HIGH(GPIOG_PIN3) | PIN_ODR_HIGH(GPIOG_PIN4) | PIN_ODR_HIGH(GPIOG_PIN5) | PIN_ODR_HIGH(GPIOG_PIN6) | PIN_ODR_HIGH(GPIOG_PIN7) | PIN_ODR_HIGH(GPIOG_PIN8) | PIN_ODR_HIGH(GPIOG_PIN9) | PIN_ODR_HIGH(GPIOG_PIN10) | PIN_ODR_HIGH(GPIOG_PIN11) | PIN_ODR_HIGH(GPIOG_PIN12) | PIN_ODR_HIGH(GPIOG_PIN13) | PIN_ODR_HIGH(GPIOG_PIN14) | PIN_ODR_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | PIN_AFIO_AF(GPIOG_PIN1, 0) | PIN_AFIO_AF(GPIOG_PIN2, 0) | PIN_AFIO_AF(GPIOG_PIN3, 0) | PIN_AFIO_AF(GPIOG_PIN4, 0) | PIN_AFIO_AF(GPIOG_PIN5, 0) | PIN_AFIO_AF(GPIOG_PIN6, 0) | PIN_AFIO_AF(GPIOG_PIN7, 0)) -#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | PIN_AFIO_AF(GPIOG_PIN9, 0) | PIN_AFIO_AF(GPIOG_PIN10, 0) | PIN_AFIO_AF(GPIOG_PIN11, 0) | PIN_AFIO_AF(GPIOG_PIN12, 0) | PIN_AFIO_AF(GPIOG_PIN13, 0) | PIN_AFIO_AF(GPIOG_PIN14, 0) | PIN_AFIO_AF(GPIOG_PIN15, 0)) - -/* - * GPIOH setup: - * - * PH0 - PIN0 (input pullup). - * PH1 - PIN1 (input pullup). - * PH2 - PIN2 (input pullup). - * PH3 - PIN3 (input pullup). - * PH4 - PIN4 (input pullup). - * PH5 - PIN5 (input pullup). - * PH6 - PIN6 (input pullup). - * PH7 - PIN7 (input pullup). - * PH8 - PIN8 (input pullup). - * PH9 - PIN9 (input pullup). - * PH10 - PIN10 (input pullup). - * PH11 - PIN11 (input pullup). - * PH12 - PIN12 (input pullup). - * PH13 - PIN13 (input pullup). - * PH14 - PIN14 (input pullup). - * PH15 - PIN15 (input pullup). - */ -#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_PIN0) | PIN_MODE_INPUT(GPIOH_PIN1) | PIN_MODE_INPUT(GPIOH_PIN2) | PIN_MODE_INPUT(GPIOH_PIN3) | PIN_MODE_INPUT(GPIOH_PIN4) | PIN_MODE_INPUT(GPIOH_PIN5) | PIN_MODE_INPUT(GPIOH_PIN6) | PIN_MODE_INPUT(GPIOH_PIN7) | PIN_MODE_INPUT(GPIOH_PIN8) | PIN_MODE_INPUT(GPIOH_PIN9) | PIN_MODE_INPUT(GPIOH_PIN10) | PIN_MODE_INPUT(GPIOH_PIN11) | PIN_MODE_INPUT(GPIOH_PIN12) | PIN_MODE_INPUT(GPIOH_PIN13) | PIN_MODE_INPUT(GPIOH_PIN14) | PIN_MODE_INPUT(GPIOH_PIN15)) -#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) | PIN_OTYPE_PUSHPULL(GPIOH_PIN1) | PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) -#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOH_PIN0) | PIN_OSPEED_VERYLOW(GPIOH_PIN1) | PIN_OSPEED_VERYLOW(GPIOH_PIN2) | PIN_OSPEED_VERYLOW(GPIOH_PIN3) | PIN_OSPEED_VERYLOW(GPIOH_PIN4) | PIN_OSPEED_VERYLOW(GPIOH_PIN5) | PIN_OSPEED_VERYLOW(GPIOH_PIN6) | PIN_OSPEED_VERYLOW(GPIOH_PIN7) | PIN_OSPEED_VERYLOW(GPIOH_PIN8) | PIN_OSPEED_VERYLOW(GPIOH_PIN9) | PIN_OSPEED_VERYLOW(GPIOH_PIN10) | PIN_OSPEED_VERYLOW(GPIOH_PIN11) | PIN_OSPEED_VERYLOW(GPIOH_PIN12) | PIN_OSPEED_VERYLOW(GPIOH_PIN13) | PIN_OSPEED_VERYLOW(GPIOH_PIN14) | PIN_OSPEED_VERYLOW(GPIOH_PIN15)) -#define VAL_GPIOH_PUPDR (PIN_PUPDR_PULLUP(GPIOH_PIN0) | PIN_PUPDR_PULLUP(GPIOH_PIN1) | PIN_PUPDR_PULLUP(GPIOH_PIN2) | PIN_PUPDR_PULLUP(GPIOH_PIN3) | PIN_PUPDR_PULLUP(GPIOH_PIN4) | PIN_PUPDR_PULLUP(GPIOH_PIN5) | PIN_PUPDR_PULLUP(GPIOH_PIN6) | PIN_PUPDR_PULLUP(GPIOH_PIN7) | PIN_PUPDR_PULLUP(GPIOH_PIN8) | PIN_PUPDR_PULLUP(GPIOH_PIN9) | PIN_PUPDR_PULLUP(GPIOH_PIN10) | PIN_PUPDR_PULLUP(GPIOH_PIN11) | PIN_PUPDR_PULLUP(GPIOH_PIN12) | PIN_PUPDR_PULLUP(GPIOH_PIN13) | PIN_PUPDR_PULLUP(GPIOH_PIN14) | PIN_PUPDR_PULLUP(GPIOH_PIN15)) -#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_PIN0) | PIN_ODR_HIGH(GPIOH_PIN1) | PIN_ODR_HIGH(GPIOH_PIN2) | PIN_ODR_HIGH(GPIOH_PIN3) | PIN_ODR_HIGH(GPIOH_PIN4) | PIN_ODR_HIGH(GPIOH_PIN5) | PIN_ODR_HIGH(GPIOH_PIN6) | PIN_ODR_HIGH(GPIOH_PIN7) | PIN_ODR_HIGH(GPIOH_PIN8) | PIN_ODR_HIGH(GPIOH_PIN9) | PIN_ODR_HIGH(GPIOH_PIN10) | PIN_ODR_HIGH(GPIOH_PIN11) | PIN_ODR_HIGH(GPIOH_PIN12) | PIN_ODR_HIGH(GPIOH_PIN13) | PIN_ODR_HIGH(GPIOH_PIN14) | PIN_ODR_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_PIN0, 0) | PIN_AFIO_AF(GPIOH_PIN1, 0) | PIN_AFIO_AF(GPIOH_PIN2, 0) | PIN_AFIO_AF(GPIOH_PIN3, 0) | PIN_AFIO_AF(GPIOH_PIN4, 0) | PIN_AFIO_AF(GPIOH_PIN5, 0) | PIN_AFIO_AF(GPIOH_PIN6, 0) | PIN_AFIO_AF(GPIOH_PIN7, 0)) -#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | PIN_AFIO_AF(GPIOH_PIN9, 0) | PIN_AFIO_AF(GPIOH_PIN10, 0) | PIN_AFIO_AF(GPIOH_PIN11, 0) | PIN_AFIO_AF(GPIOH_PIN12, 0) | PIN_AFIO_AF(GPIOH_PIN13, 0) | PIN_AFIO_AF(GPIOH_PIN14, 0) | PIN_AFIO_AF(GPIOH_PIN15, 0)) - -/* - * USB bus activation macro, required by the USB driver. - */ -// #define usb_lld_connect_bus(usbp) -#define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14))) -// #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT) -/* - * USB bus de-activation macro, required by the USB driver. - */ -// #define usb_lld_disconnect_bus(usbp) -#define usb_lld_disconnect_bus(usbp) \ - (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); \ - palClearPad(GPIOA, GPIOA_USB_DP) -// #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12) - -#if !defined(_FROM_ASM_) -# ifdef __cplusplus -extern "C" { -# endif -void boardInit(void); -# ifdef __cplusplus -} -# endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.mk b/drivers/boards/GENERIC_STM32_F303XC/board.mk deleted file mode 100644 index 43377629a3..0000000000 --- a/drivers/boards/GENERIC_STM32_F303XC/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC diff --git a/drivers/boards/GENERIC_STM32_F303XC/bootloader_defs.h b/drivers/boards/GENERIC_STM32_F303XC/bootloader_defs.h deleted file mode 100644 index 3b0e9d20a6..0000000000 --- a/drivers/boards/GENERIC_STM32_F303XC/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/drivers/boards/IC_TEENSY_3_1/board.c b/drivers/boards/IC_TEENSY_3_1/board.c deleted file mode 100644 index 63e3f64929..0000000000 --- a/drivers/boards/IC_TEENSY_3_1/board.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = { - .ports = - { - { - /* - * PORTA setup. - * - * PTA4 - PIN33 - * PTA5 - PIN24 - * PTA12 - PIN3 - * PTA13 - PIN4 - * - * PTA18/19 crystal - * PTA0/3 SWD - */ - .port = IOPORT1, - .pads = - { - PAL_MODE_ALTERNATIVE_7, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_ALTERNATIVE_7, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_INPUT_ANALOG, PAL_MODE_INPUT_ANALOG, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTB setup. - * - * PTB0 - PIN16 - * PTB1 - PIN17 - * PTB2 - PIN19 - * PTB3 - PIN18 - * PTB16 - PIN0 - UART0_TX - * PTB17 - PIN1 - UART0_RX - * PTB18 - PIN32 - * PTB19 - PIN25 - */ - .port = IOPORT2, - .pads = - { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_ALTERNATIVE_3, PAL_MODE_ALTERNATIVE_3, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTC setup. - * - * PTC0 - PIN15 - * PTC1 - PIN22 - * PTC2 - PIN23 - * PTC3 - PIN9 - * PTC4 - PIN10 - * PTC5 - PIN13 - * PTC6 - PIN11 - * PTC7 - PIN12 - * PTC8 - PIN28 - * PTC9 - PIN27 - * PTC10 - PIN29 - * PTC11 - PIN30 - */ - .port = IOPORT3, - .pads = - { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTD setup. - * - * PTD0 - PIN2 - * PTD1 - PIN14 - * PTD2 - PIN7 - * PTD3 - PIN8 - * PTD4 - PIN6 - * PTD5 - PIN20 - * PTD6 - PIN21 - * PTD7 - PIN5 - */ - .port = IOPORT4, - .pads = - { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTE setup. - * - * PTE0 - PIN31 - * PTE1 - PIN26 - */ - .port = IOPORT5, - .pads = - { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - }, -}; -#endif - -// NOTE: This value comes from kiibohd/controller and is the location of a value -// which needs to be checked before disabling the watchdog (which happens in -// k20x_clock_init) -#define WDOG_TMROUTL *(volatile uint16_t *)0x40052012 - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - // This is a dirty hack and should only be used as a temporary fix until this - // is upstreamed. - while (WDOG_TMROUTL < 2) - ; // Must wait for WDOG timer if already running, before jumping - - k20x_clock_init(); -} - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) {} diff --git a/drivers/boards/IC_TEENSY_3_1/board.h b/drivers/boards/IC_TEENSY_3_1/board.h deleted file mode 100644 index c8259ab0c7..0000000000 --- a/drivers/boards/IC_TEENSY_3_1/board.h +++ /dev/null @@ -1,295 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for the PJRC Teensy 3.1 board. - */ - -/* - * Board identifier. - */ -#define BOARD_PJRC_TEENSY_3_1 -#define BOARD_NAME "PJRC Teensy 3.1" - -/* External 16 MHz crystal */ -#define KINETIS_XTAL_FREQUENCY 16000000UL - -/* Use internal capacitors for the crystal */ -#define KINETIS_BOARD_OSCILLATOR_SETTING OSC_CR_SC8P | OSC_CR_SC2P - -/* - * MCU type - */ -#define K20x7 - -/* - * IO pins assignments. - */ -#define PORTA_PIN0 0 -#define PORTA_PIN1 1 -#define PORTA_PIN2 2 -#define PORTA_PIN3 3 -#define TEENSY_PIN33 4 -#define TEENSY_PIN24 5 -#define PORTA_PIN6 6 -#define PORTA_PIN7 7 -#define PORTA_PIN8 8 -#define PORTA_PIN9 9 -#define PORTA_PIN10 10 -#define PORTA_PIN11 11 -#define TEENSY_PIN3 12 -#define TEENSY_PIN4 13 -#define PORTA_PIN14 14 -#define PORTA_PIN15 15 -#define PORTA_PIN16 16 -#define PORTA_PIN17 17 -#define PORTA_PIN18 18 -#define PORTA_PIN19 19 -#define PORTA_PIN20 20 -#define PORTA_PIN21 21 -#define PORTA_PIN22 22 -#define PORTA_PIN23 23 -#define PORTA_PIN24 24 -#define PORTA_PIN25 25 -#define PORTA_PIN26 26 -#define PORTA_PIN27 27 -#define PORTA_PIN28 28 -#define PORTA_PIN29 29 -#define PORTA_PIN30 30 -#define PORTA_PIN31 31 - -#define TEENSY_PIN3_IOPORT IOPORT1 -#define TEENSY_PIN4_IOPORT IOPORT1 -#define TEENSY_PIN24_IOPORT IOPORT1 -#define TEENSY_PIN33_IOPORT IOPORT1 - -#define TEENSY_PIN16 0 -#define TEENSY_PIN17 1 -#define TEENSY_PIN19 2 -#define TEENSY_PIN18 3 -#define PORTB_PIN4 4 -#define PORTB_PIN5 5 -#define PORTB_PIN6 6 -#define PORTB_PIN7 7 -#define PORTB_PIN8 8 -#define PORTB_PIN9 9 -#define PORTB_PIN10 10 -#define PORTB_PIN11 11 -#define PORTB_PIN12 12 -#define PORTB_PIN13 13 -#define PORTB_PIN14 14 -#define PORTB_PIN15 15 -#define TEENSY_PIN0 16 -#define TEENSY_PIN1 17 -#define TEENSY_PIN32 18 -#define TEENSY_PIN25 19 -#define PORTB_PIN20 20 -#define PORTB_PIN21 21 -#define PORTB_PIN22 22 -#define PORTB_PIN23 23 -#define PORTB_PIN24 24 -#define PORTB_PIN25 25 -#define PORTB_PIN26 26 -#define PORTB_PIN27 27 -#define PORTB_PIN28 28 -#define PORTB_PIN29 29 -#define PORTB_PIN30 30 -#define PORTB_PIN31 31 - -#define TEENSY_PIN0_IOPORT IOPORT2 -#define TEENSY_PIN1_IOPORT IOPORT2 -#define TEENSY_PIN16_IOPORT IOPORT2 -#define TEENSY_PIN17_IOPORT IOPORT2 -#define TEENSY_PIN18_IOPORT IOPORT2 -#define TEENSY_PIN19_IOPORT IOPORT2 -#define TEENSY_PIN25_IOPORT IOPORT2 -#define TEENSY_PIN32_IOPORT IOPORT2 - -#define TEENSY_PIN15 0 -#define TEENSY_PIN22 1 -#define TEENSY_PIN23 2 -#define TEENSY_PIN9 3 -#define TEENSY_PIN10 4 -#define TEENSY_PIN13 5 -#define TEENSY_PIN11 6 -#define TEENSY_PIN12 7 -#define TEENSY_PIN28 8 -#define TEENSY_PIN27 9 -#define TEENSY_PIN29 10 -#define TEENSY_PIN30 11 -#define PORTC_PIN12 12 -#define PORTC_PIN13 13 -#define PORTC_PIN14 14 -#define PORTC_PIN15 15 -#define PORTC_PIN16 16 -#define PORTC_PIN17 17 -#define PORTC_PIN18 18 -#define PORTC_PIN19 19 -#define PORTC_PIN20 20 -#define PORTC_PIN21 21 -#define PORTC_PIN22 22 -#define PORTC_PIN23 23 -#define PORTC_PIN24 24 -#define PORTC_PIN25 25 -#define PORTC_PIN26 26 -#define PORTC_PIN27 27 -#define PORTC_PIN28 28 -#define PORTC_PIN29 29 -#define PORTC_PIN30 30 -#define PORTC_PIN31 31 - -#define TEENSY_PIN9_IOPORT IOPORT3 -#define TEENSY_PIN10_IOPORT IOPORT3 -#define TEENSY_PIN11_IOPORT IOPORT3 -#define TEENSY_PIN12_IOPORT IOPORT3 -#define TEENSY_PIN13_IOPORT IOPORT3 -#define TEENSY_PIN15_IOPORT IOPORT3 -#define TEENSY_PIN22_IOPORT IOPORT3 -#define TEENSY_PIN23_IOPORT IOPORT3 -#define TEENSY_PIN27_IOPORT IOPORT3 -#define TEENSY_PIN28_IOPORT IOPORT3 -#define TEENSY_PIN29_IOPORT IOPORT3 -#define TEENSY_PIN30_IOPORT IOPORT3 - -#define TEENSY_PIN2 0 -#define TEENSY_PIN14 1 -#define TEENSY_PIN7 2 -#define TEENSY_PIN8 3 -#define TEENSY_PIN6 4 -#define TEENSY_PIN20 5 -#define TEENSY_PIN21 6 -#define TEENSY_PIN5 7 -#define PORTD_PIN8 8 -#define PORTD_PIN9 9 -#define PORTD_PIN10 10 -#define PORTD_PIN11 11 -#define PORTD_PIN12 12 -#define PORTD_PIN13 13 -#define PORTD_PIN14 14 -#define PORTD_PIN15 15 -#define PORTD_PIN16 16 -#define PORTD_PIN17 17 -#define PORTD_PIN18 18 -#define PORTD_PIN19 19 -#define PORTD_PIN20 20 -#define PORTD_PIN21 21 -#define PORTD_PIN22 22 -#define PORTD_PIN23 23 -#define PORTD_PIN24 24 -#define PORTD_PIN25 25 -#define PORTD_PIN26 26 -#define PORTD_PIN27 27 -#define PORTD_PIN28 28 -#define PORTD_PIN29 29 -#define PORTD_PIN30 30 -#define PORTD_PIN31 31 - -#define TEENSY_PIN2_IOPORT IOPORT4 -#define TEENSY_PIN5_IOPORT IOPORT4 -#define TEENSY_PIN6_IOPORT IOPORT4 -#define TEENSY_PIN7_IOPORT IOPORT4 -#define TEENSY_PIN8_IOPORT IOPORT4 -#define TEENSY_PIN14_IOPORT IOPORT4 -#define TEENSY_PIN20_IOPORT IOPORT4 -#define TEENSY_PIN21_IOPORT IOPORT4 - -#define TEENSY_PIN31 0 -#define TEENSY_PIN26 1 -#define PORTE_PIN2 2 -#define PORTE_PIN3 3 -#define PORTE_PIN4 4 -#define PORTE_PIN5 5 -#define PORTE_PIN6 6 -#define PORTE_PIN7 7 -#define PORTE_PIN8 8 -#define PORTE_PIN9 9 -#define PORTE_PIN10 10 -#define PORTE_PIN11 11 -#define PORTE_PIN12 12 -#define PORTE_PIN13 13 -#define PORTE_PIN14 14 -#define PORTE_PIN15 15 -#define PORTE_PIN16 16 -#define PORTE_PIN17 17 -#define PORTE_PIN18 18 -#define PORTE_PIN19 19 -#define PORTE_PIN20 20 -#define PORTE_PIN21 21 -#define PORTE_PIN22 22 -#define PORTE_PIN23 23 -#define PORTE_PIN24 24 -#define PORTE_PIN25 25 -#define PORTE_PIN26 26 -#define PORTE_PIN27 27 -#define PORTE_PIN28 28 -#define PORTE_PIN29 29 -#define PORTE_PIN30 30 -#define PORTE_PIN31 31 - -#define TEENSY_PIN26_IOPORT IOPORT5 -#define TEENSY_PIN31_IOPORT IOPORT5 - -#define LINE_PIN1 PAL_LINE(TEENSY_PIN1_IOPORT, TEENSY_PIN1) -#define LINE_PIN2 PAL_LINE(TEENSY_PIN2_IOPORT, TEENSY_PIN2) -#define LINE_PIN3 PAL_LINE(TEENSY_PIN3_IOPORT, TEENSY_PIN3) -#define LINE_PIN4 PAL_LINE(TEENSY_PIN4_IOPORT, TEENSY_PIN4) -#define LINE_PIN5 PAL_LINE(TEENSY_PIN5_IOPORT, TEENSY_PIN5) -#define LINE_PIN6 PAL_LINE(TEENSY_PIN6_IOPORT, TEENSY_PIN6) -#define LINE_PIN7 PAL_LINE(TEENSY_PIN7_IOPORT, TEENSY_PIN7) -#define LINE_PIN8 PAL_LINE(TEENSY_PIN8_IOPORT, TEENSY_PIN8) -#define LINE_PIN9 PAL_LINE(TEENSY_PIN9_IOPORT, TEENSY_PIN9) -#define LINE_PIN10 PAL_LINE(TEENSY_PIN10_IOPORT, TEENSY_PIN10) -#define LINE_PIN11 PAL_LINE(TEENSY_PIN11_IOPORT, TEENSY_PIN11) -#define LINE_PIN12 PAL_LINE(TEENSY_PIN12_IOPORT, TEENSY_PIN12) -#define LINE_PIN13 PAL_LINE(TEENSY_PIN13_IOPORT, TEENSY_PIN13) -#define LINE_PIN14 PAL_LINE(TEENSY_PIN14_IOPORT, TEENSY_PIN14) -#define LINE_PIN15 PAL_LINE(TEENSY_PIN15_IOPORT, TEENSY_PIN15) -#define LINE_PIN16 PAL_LINE(TEENSY_PIN16_IOPORT, TEENSY_PIN16) -#define LINE_PIN17 PAL_LINE(TEENSY_PIN17_IOPORT, TEENSY_PIN17) -#define LINE_PIN18 PAL_LINE(TEENSY_PIN18_IOPORT, TEENSY_PIN18) -#define LINE_PIN19 PAL_LINE(TEENSY_PIN19_IOPORT, TEENSY_PIN19) -#define LINE_PIN20 PAL_LINE(TEENSY_PIN20_IOPORT, TEENSY_PIN20) -#define LINE_PIN21 PAL_LINE(TEENSY_PIN21_IOPORT, TEENSY_PIN21) -#define LINE_PIN22 PAL_LINE(TEENSY_PIN22_IOPORT, TEENSY_PIN22) -#define LINE_PIN23 PAL_LINE(TEENSY_PIN23_IOPORT, TEENSY_PIN23) -#define LINE_PIN24 PAL_LINE(TEENSY_PIN24_IOPORT, TEENSY_PIN24) -#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25) -#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25) -#define LINE_PIN26 PAL_LINE(TEENSY_PIN26_IOPORT, TEENSY_PIN26) -#define LINE_PIN27 PAL_LINE(TEENSY_PIN27_IOPORT, TEENSY_PIN27) -#define LINE_PIN28 PAL_LINE(TEENSY_PIN28_IOPORT, TEENSY_PIN28) -#define LINE_PIN29 PAL_LINE(TEENSY_PIN29_IOPORT, TEENSY_PIN29) -#define LINE_PIN30 PAL_LINE(TEENSY_PIN30_IOPORT, TEENSY_PIN30) -#define LINE_PIN31 PAL_LINE(TEENSY_PIN31_IOPORT, TEENSY_PIN31) -#define LINE_PIN32 PAL_LINE(TEENSY_PIN32_IOPORT, TEENSY_PIN32) -#define LINE_PIN33 PAL_LINE(TEENSY_PIN33_IOPORT, TEENSY_PIN33) - -#define LINE_LED LINE_PIN13 - -#if !defined(_FROM_ASM_) -# ifdef __cplusplus -extern "C" { -# endif -void boardInit(void); -# ifdef __cplusplus -} -# endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/drivers/boards/IC_TEENSY_3_1/board.mk b/drivers/boards/IC_TEENSY_3_1/board.mk deleted file mode 100644 index 62f5b751c7..0000000000 --- a/drivers/boards/IC_TEENSY_3_1/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/IC_TEENSY_3_1/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/IC_TEENSY_3_1 diff --git a/drivers/boards/STM32_F103_STM32DUINO/board.c b/drivers/boards/STM32_F103_STM32DUINO/board.c deleted file mode 100644 index 8c5a87f35f..0000000000 --- a/drivers/boards/STM32_F103_STM32DUINO/board.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -// Value to place in RTC backup register 10 for persistent bootloader mode -#define RTC_BOOTLOADER_FLAG 0x424C - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { - //JTAG-DP Disabled and SW-DP Enabled - AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE; - //Set backup register DR10 to enter bootloader on reset - BKP->DR10 = RTC_BOOTLOADER_FLAG; -} diff --git a/drivers/boards/STM32_F103_STM32DUINO/board.h b/drivers/boards/STM32_F103_STM32DUINO/board.h deleted file mode 100644 index 09d182d6ca..0000000000 --- a/drivers/boards/STM32_F103_STM32DUINO/board.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for a Generic STM32F103 board. - */ - -/* - * Board identifier. - */ -#define BOARD_STM32_F103_STM32DUINO -#define BOARD_NAME "GENERIC STM32F103C8T6 board - stm32duino bootloader" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - */ -#define STM32F103xB - -/* - * IO pins assignments - */ - -/* on-board */ - -#define GPIOA_LED 8 -#define GPIOD_OSC_IN 0 -#define GPIOD_OSC_OUT 1 - -/* In case your board has a "USB enable" hardware - controlled by a pin, define it here. (It could be just - a 1.5k resistor connected to D+ line.) -*/ -/* -#define GPIOB_USB_DISC 10 -*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - * PA2 - Alternate output (USART2 TX). - * PA3 - Normal input (USART2 RX). - * PA9 - Alternate output (USART1 TX). - * PA10 - Normal input (USART1 RX). - */ -#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - * PB10 - Push Pull output (USB switch). - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - * PC13 - Push Pull output (LED). - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -/* The point is that most of the generic STM32F103* boards - have a 1.5k resistor connected on one end to the D+ line - and on the other end to some pin. Or even a slightly more - complicated "USB enable" circuit, controlled by a pin. - That should go here. - - However on some boards (e.g. one that I have), there's no - such hardware. In which case it's better to not do anything. -*/ -/* -#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); - -/* - * USB bus de-activation macro, required by the USB driver. - */ -/* -#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/drivers/boards/STM32_F103_STM32DUINO/board.mk b/drivers/boards/STM32_F103_STM32DUINO/board.mk deleted file mode 100644 index 81141bdfd9..0000000000 --- a/drivers/boards/STM32_F103_STM32DUINO/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/STM32_F103_STM32DUINO/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/STM32_F103_STM32DUINO diff --git a/drivers/boards/ld/MKL26Z64.ld b/drivers/boards/ld/MKL26Z64.ld deleted file mode 100644 index c4ca8b874c..0000000000 --- a/drivers/boards/ld/MKL26Z64.ld +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast <s3+flabbergast@sdfeu.org> - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * KL26Z64 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 62k - 0x410 - flash3 : org = 0x0000F800, len = 2k - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFF800, len = 8k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -__eeprom_workarea_start__ = ORIGIN(flash3); -__eeprom_workarea_size__ = LENGTH(flash3); -__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/drivers/boards/ld/STM32F103x8_stm32duino_bootloader.ld b/drivers/boards/ld/STM32F103x8_stm32duino_bootloader.ld deleted file mode 100644 index d0688ef601..0000000000 --- a/drivers/boards/ld/STM32F103x8_stm32duino_bootloader.ld +++ /dev/null @@ -1,88 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * ST32F103xB memory setup for use with the maplemini bootloader. - * You will have to - * #define CORTEX_VTOR_INIT 0x5000 - * in your projects chconf.h - */ -MEMORY -{ - flash0 : org = 0x08002000, len = 64k - 0x2000 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 20k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld |