6 files changed, 45 insertions, 21 deletions
diff --git a/docs/config_options.md b/docs/config_options.md
index 3e011a5cc9..05e27a835c 100644
--- a/docs/config_options.md
+++ b/docs/config_options.md
@@ -39,11 +39,11 @@ This is a C header file that is one of the first things included, and will persi
   * defines your VID, and for most DIY projects, can be whatever you want
 * `#define PRODUCT_ID 0x5678`
   * defines your PID, and for most DIY projects, can be whatever you want
-* `#define DEVICE_VER 0`
+* `#define DEVICE_VER 0x0100`
   * defines the device version (often used for revisions)
-* `#define MANUFACTURER Me`
+* `#define MANUFACTURER "Me"`
   * generally who/whatever brand produced the board
-* `#define PRODUCT Board`
+* `#define PRODUCT "Board"`
   * the name of the keyboard
 * `#define MATRIX_ROWS 5`
   * the number of rows in your keyboard's matrix
diff --git a/docs/feature_combo.md b/docs/feature_combo.md
index 42d965509b..bb0b5d7aa0 100644
--- a/docs/feature_combo.md
+++ b/docs/feature_combo.md
@@ -255,7 +255,7 @@ bool combo_should_trigger(uint16_t combo_index, combo_t *combo, uint16_t keycode
 ```
 
 ## Variable Length Combos
-If you leave `COMBO_COUNT` undefined in `config.h`, it allows you to programmatically declare the size of the Combo data structure and avoid updating `COMBO_COUNT`. Instead a variable called `COMBO_LEN` has to be set. It can be set with something similar to the following in `keymap.c`: `uint16_t COMBO_LEN = sizeof(key_combos) / sizeof(key_combos[0]);` or by adding `COMBO_LENGTH` as the *last* entry in the combo enum and then `uint16_t COMBO_LEN = COMBO_LENGTH;` as such:
+If you leave `COMBO_COUNT` undefined in `config.h`, it allows you to programmatically declare the size of the Combo data structure and avoid updating `COMBO_COUNT`. Instead a variable called `COMBO_LEN` has to be set. It can be set with something similar to the following in `keymap.c`: `uint16_t COMBO_LEN = ARRAY_SIZE(key_combos);` or by adding `COMBO_LENGTH` as the *last* entry in the combo enum and then `uint16_t COMBO_LEN = COMBO_LENGTH;` as such:
 ```c
 enum myCombos {
     ...,
diff --git a/docs/feature_encoders.md b/docs/feature_encoders.md
index fdde03ac23..f93ab9fd2d 100644
--- a/docs/feature_encoders.md
+++ b/docs/feature_encoders.md
@@ -88,6 +88,14 @@ const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
 #endif
 ```
 
+Using encoder mapping pumps events through the normal QMK keycode processing pipeline, resulting in a _keydown/keyup_ combination pushed through `process_record_xxxxx()`. To configure the amount of time between the encoder "keyup" and "keydown", you can add the following to your `config.h`:
+
+```c
+#define ENCODER_MAP_KEY_DELAY 10
+```
+
+?> By default, the encoder map delay matches the value of `TAP_CODE_DELAY`.
+
 ## Callbacks
 
 When not using `ENCODER_MAP_ENABLE = yes`, the callback functions can be inserted into your `<keyboard>.c`:
@@ -119,7 +127,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) {
 }
 ```
 
-!> If you return `true`, it will allow the keyboard level code to run as well. Returning `false` will override the keyboard level code, depending on how the keyboard function is set up. 
+!> If you return `true`, it will allow the keyboard level code to run as well. Returning `false` will override the keyboard level code, depending on how the keyboard function is set up.
 
 Layer conditions can also be used with the callback function like the following:
 
@@ -172,7 +180,7 @@ The A an B lines of the encoders should be wired directly to the MCU, and the C/
 Multiple encoders may share pins so long as each encoder has a distinct pair of pins when the following conditions are met:
 - using detent encoders
 - pads must be high at the detent stability point which is called 'default position' in QMK
-- no more than two encoders sharing a pin can be turned at the same time 
+- no more than two encoders sharing a pin can be turned at the same time
 
 For example you can support two encoders using only 3 pins like this
 ```
@@ -185,4 +193,4 @@ You could even support three encoders using only three pins (one per encoder) ho
 #define ENCODERS_PAD_A { B1, B1, B2 }
 #define ENCODERS_PAD_B { B2, B3, B3 }
 ```
-Here rotating Encoder 0 `B1 B2` and Encoder 1 `B1 B3` could be interpreted as rotating Encoder 2 `B2 B3` or `B3 B2` depending on the timing. This may still be a useful configuration depending on your use case 
+Here rotating Encoder 0 `B1 B2` and Encoder 1 `B1 B3` could be interpreted as rotating Encoder 2 `B2 B3` or `B3 B2` depending on the timing. This may still be a useful configuration depending on your use case
diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md
index 999dd1272d..afc57ed493 100644
--- a/docs/feature_pointing_device.md
+++ b/docs/feature_pointing_device.md
@@ -487,3 +487,13 @@ report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, re
     return pointing_device_combine_reports(left_report, right_report);
 }
 ```
+
+# Troubleshooting
+
+If you are having issues with pointing device drivers debug messages can be enabled that will give you insights in the inner workings. To enable these add to your keyboards `config.h` file:
+
+```c
+#define POINTING_DEVICE_DEBUG
+```
+ 
+?> The messages will be printed out to the `CONSOLE` output. For additional information, refer to [Debugging/Troubleshooting QMK](faq_debug.md).
diff --git a/docs/feature_ps2_mouse.md b/docs/feature_ps2_mouse.md
index c980705ae7..e714d9b867 100644
--- a/docs/feature_ps2_mouse.md
+++ b/docs/feature_ps2_mouse.md
@@ -32,13 +32,14 @@ In rules.mk:
 
 ```make
 PS2_MOUSE_ENABLE = yes
-PS2_USE_BUSYWAIT = yes
+PS2_ENABLE = yes
+PS2_DRIVER = busywait
 ```
 
 In your keyboard config.h:
 
 ```c
-#ifdef PS2_USE_BUSYWAIT
+#ifdef PS2_DRIVER_BUSYWAIT
 #   define PS2_CLOCK_PIN   D1
 #   define PS2_DATA_PIN    D2
 #endif
@@ -52,13 +53,14 @@ In rules.mk:
 
 ```make
 PS2_MOUSE_ENABLE = yes
-PS2_USE_INT = yes
+PS2_ENABLE = yes
+PS2_DRIVER = interrupt
 ```
 
 In your keyboard config.h:
 
 ```c
-#ifdef PS2_USE_INT
+#ifdef PS2_DRIVER_INTERRUPT
 #define PS2_CLOCK_PIN   D2
 #define PS2_DATA_PIN    D5
 
@@ -84,7 +86,8 @@ In rules.mk:
 
 ```
 PS2_MOUSE_ENABLE = yes
-PS2_USE_INT = yes
+PS2_ENABLE = yes
+PS2_DRIVER = interrupt
 ```
 
 In your keyboard config.h:
@@ -108,13 +111,14 @@ In rules.mk:
 
 ```make
 PS2_MOUSE_ENABLE = yes
-PS2_USE_USART = yes
+PS2_ENABLE = yes
+PS2_DRIVER = usart
 ```
 
 In your keyboard config.h:
 
 ```c
-#ifdef PS2_USE_USART
+#ifdef PS2_DRIVER_USART
 #define PS2_CLOCK_PIN   D5
 #define PS2_DATA_PIN    D2
 
diff --git a/docs/ja/feature_ps2_mouse.md b/docs/ja/feature_ps2_mouse.md
index 569934c187..2798f61283 100644
--- a/docs/ja/feature_ps2_mouse.md
+++ b/docs/ja/feature_ps2_mouse.md
@@ -36,13 +36,14 @@ rules.mk で:
 
 ```makefile
 PS2_MOUSE_ENABLE = yes
-PS2_USE_BUSYWAIT = yes
+PS2_ENABLE = yes
+PS2_DRIVER = busywait
 ```
 
 キーボードの config.h で:
 
 ```c
-#ifdef PS2_USE_BUSYWAIT
+#ifdef PS2_DRIVER_BUSYWAIT
 #   define PS2_CLOCK_PIN   D1
 #   define PS2_DATA_PIN    D2
 #endif
@@ -56,13 +57,14 @@ rules.mk で:
 
 ```makefile
 PS2_MOUSE_ENABLE = yes
-PS2_USE_INT = yes
+PS2_ENABLE = yes
+PS2_DRIVER = interrupt
 ```
 
 キーボードの config.h で:
 
 ```c
-#ifdef PS2_USE_INT
+#ifdef PS2_DRIVER_INTERRUPT
 #define PS2_CLOCK_PIN   D2
 #define PS2_DATA_PIN    D5
 
@@ -88,14 +90,14 @@ rules.mk で:
 
 ```makefile
 PS2_MOUSE_ENABLE = yes
-PS2_USE_USART = yes
+PS2_ENABLE = yes
+PS2_DRIVER = usart
 ```
 
 キーボードの config.h で:
 
 ```c
-#ifdef PS2_USE_USART
-#ifdef PS2_USE_USART
+#ifdef PS2_DRIVER_USART
 #define PS2_CLOCK_PIN   D5
 #define PS2_DATA_PIN    D2