diff options
Diffstat (limited to 'docs/feature_encoders.md')
| -rw-r--r-- | docs/feature_encoders.md | 36 |
1 files changed, 35 insertions, 1 deletions
diff --git a/docs/feature_encoders.md b/docs/feature_encoders.md index 6a1a3750a6..a3d56fd5ef 100644 --- a/docs/feature_encoders.md +++ b/docs/feature_encoders.md @@ -54,9 +54,43 @@ If you are using different pinouts for the encoders on each half of a split keyb #define ENCODER_RESOLUTIONS_RIGHT { 2, 4 } ``` +If the `_RIGHT` definitions aren't specified in your `config.h`, then the non-`_RIGHT` versions will be applied to both sides of the split. + +Additionally, if one side does not have an encoder, you can specify `{}` for the pins/resolution -- for example, a split keyboard with only a right-side encoder: + +```c +#define ENCODERS_PAD_A { } +#define ENCODERS_PAD_B { } +#define ENCODER_RESOLUTIONS { } +#define ENCODERS_PAD_A_RIGHT { B12 } +#define ENCODERS_PAD_B_RIGHT { B13 } +#define ENCODER_RESOLUTIONS_RIGHT { 4 } +``` + +## Encoder map + +Encoder mapping may be added to your `keymap.c`, which replicates the normal keyswitch layer handling functionality, but with encoders. Add this to your `rules.mk`: + +```make +ENCODER_MAP_ENABLE = yes +``` + +Your `keymap.c` will then need an encoder mapping defined (for four layers and two encoders): + +```c +#if defined(ENCODER_MAP_ENABLE) +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = { + [_BASE] = { ENCODER_CCW_CW(KC_MS_WH_UP, KC_MS_WH_DOWN), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [_LOWER] = { ENCODER_CCW_CW(RGB_HUD, RGB_HUI), ENCODER_CCW_CW(RGB_SAD, RGB_SAI) }, + [_RAISE] = { ENCODER_CCW_CW(RGB_VAD, RGB_VAI), ENCODER_CCW_CW(RGB_SPD, RGB_SPI) }, + [_ADJUST] = { ENCODER_CCW_CW(RGB_RMOD, RGB_MOD), ENCODER_CCW_CW(KC_RIGHT, KC_LEFT) }, +}; +#endif +``` + ## Callbacks -The callback functions can be inserted into your `<keyboard>.c`: +When not using `ENCODER_MAP_ENABLE = yes`, the callback functions can be inserted into your `<keyboard>.c`: ```c bool encoder_update_kb(uint8_t index, bool clockwise) { |