summaryrefslogtreecommitdiff
path: root/docs/adc_driver.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/adc_driver.md')
-rw-r--r--docs/adc_driver.md17
1 files changed, 17 insertions, 0 deletions
diff --git a/docs/adc_driver.md b/docs/adc_driver.md
index 69fff4b3c2..494d90c94f 100644
--- a/docs/adc_driver.md
+++ b/docs/adc_driver.md
@@ -43,6 +43,8 @@ Then place this include at the top of your code:
### ARM
+#### STM32
+
Note that some of these pins are doubled-up on ADCs with the same channel. This is because the pins can be used for either ADC.
Also note that the F0 and F3 use different numbering schemes. The F0 has a single ADC and the channels are 0-indexed, whereas the F3 has 4 ADCs and the channels are 1-indexed. This is because the F0 uses the `ADCv1` implementation of the ADC, whereas the F3 uses the `ADCv3` implementation.
@@ -121,6 +123,21 @@ Also note that the F0 and F3 use different numbering schemes. The F0 has a singl
<sup>² Not all STM32F4xx devices have ADC2 and/or ADC3, therefore some configurations shown in this table may be unavailable; in particular, pins `F4`…`F10` cannot be used as ADC inputs on devices which do not have ADC3. Check the device datasheet to confirm which pin functions are supported.</sup>
+#### RP2040
+
+RP2040 has only a single ADC (`ADCD1` in ChibiOS); in the QMK API the index for that ADC is 0.
+
+|Channel|Pin |
+|-------|-------------------|
+|0 |`GP26` |
+|1 |`GP27` |
+|2 |`GP28` |
+|3 |`GP29` |
+|4 |Temperature sensor*|
+
+
+<sup>* The temperature sensor is disabled by default and needs to be enabled by the RP2040-specific function: `adcRPEnableTS(&ADCD1)`. The ADC must be initialized before calling that function; an easy way to ensure that is to perform a dummy conversion.</sup>
+
## Functions
### AVR