summaryrefslogtreecommitdiff
path: root/builddefs
diff options
context:
space:
mode:
Diffstat (limited to 'builddefs')
-rw-r--r--builddefs/bootloader.mk8
-rw-r--r--builddefs/build_keyboard.mk39
-rw-r--r--builddefs/build_test.mk7
-rw-r--r--builddefs/common_features.mk150
-rw-r--r--builddefs/common_rules.mk118
-rw-r--r--builddefs/mcu_selection.mk62
-rw-r--r--builddefs/show_options.mk2
-rw-r--r--builddefs/testlist.mk1
8 files changed, 234 insertions, 153 deletions
diff --git a/builddefs/bootloader.mk b/builddefs/bootloader.mk
index eba8e280e4..51e9b7d558 100644
--- a/builddefs/bootloader.mk
+++ b/builddefs/bootloader.mk
@@ -105,8 +105,8 @@ ifeq ($(strip $(BOOTLOADER)), halfkay)
ifeq ($(strip $(MCU)), at90usb1286)
BOOTLOADER_SIZE = 1024
endif
- # Teensy LC, 3.x
- ifneq (,$(filter $(MCU_ORIG), MKL26Z64 MK20DX128 MK20DX256 MK66FX1M0))
+ # Teensy LC, 3.0, 3.1/2, 3.5, 3.6
+ ifneq (,$(filter $(MCU_ORIG), MKL26Z64 MK20DX128 MK20DX256 MK64FX512 MK66FX1M0))
FIRMWARE_FORMAT = hex
endif
endif
@@ -200,6 +200,10 @@ ifeq ($(strip $(BOOTLOADER)), tinyuf2)
OPT_DEFS += -DBOOTLOADER_TINYUF2
BOOTLOADER_TYPE = tinyuf2
endif
+ifeq ($(strip $(BOOTLOADER)), rp2040)
+ OPT_DEFS += -DBOOTLOADER_RP2040
+ BOOTLOADER_TYPE = rp2040
+endif
ifeq ($(strip $(BOOTLOADER)), halfkay)
OPT_DEFS += -DBOOTLOADER_HALFKAY
BOOTLOADER_TYPE = halfkay
diff --git a/builddefs/build_keyboard.mk b/builddefs/build_keyboard.mk
index dc86b232df..fe95dcaf15 100644
--- a/builddefs/build_keyboard.mk
+++ b/builddefs/build_keyboard.mk
@@ -13,6 +13,14 @@ endif
include paths.mk
include $(BUILDDEFS_PATH)/message.mk
+# Helper to add defines with a 'QMK_' prefix
+define add_qmk_prefix_defs
+ ifdef $1
+ # Need to cater for 'STM32L4xx+'
+ OPT_DEFS += -DQMK_$(2)="$($1)" -DQMK_$(2)_$(shell echo $($1) | sed -e 's@+@Plus@g' -e 's@[^a-zA-Z0-9]@_@g' | tr '[:lower:]' '[:upper:]')
+ endif
+endef
+
# Set the qmk cli to use
QMK_BIN ?= qmk
@@ -390,10 +398,18 @@ ifneq ("$(KEYMAP_H)","")
CONFIG_H += $(KEYMAP_H)
endif
+OPT_DEFS += -DKEYMAP_C=\"$(KEYMAP_C)\"
+
+# If a keymap or userspace places their keymap array in another file instead, allow for it to be included
+# !!NOTE!! -- For this to work, the source file cannot be part of $(SRC), so users should not add it via `SRC += <file>`
+ifneq ($(strip $(INTROSPECTION_KEYMAP_C)),)
+OPT_DEFS += -DINTROSPECTION_KEYMAP_C=\"$(strip $(INTROSPECTION_KEYMAP_C))\"
+endif
+
# project specific files
SRC += \
$(KEYBOARD_SRC) \
- $(KEYMAP_C) \
+ $(QUANTUM_DIR)/keymap_introspection.c \
$(QUANTUM_SRC) \
$(QUANTUM_DIR)/main.c \
@@ -436,6 +452,14 @@ else
include $(TMK_PATH)/protocol/$(PLATFORM_KEY).mk
endif
+# Setup definitions based on the selected MCU
+$(eval $(call add_qmk_prefix_defs,MCU_ORIG,MCU))
+$(eval $(call add_qmk_prefix_defs,MCU_ARCH,MCU_ARCH))
+$(eval $(call add_qmk_prefix_defs,MCU_PORT_NAME,MCU_PORT_NAME))
+$(eval $(call add_qmk_prefix_defs,MCU_FAMILY,MCU_FAMILY))
+$(eval $(call add_qmk_prefix_defs,MCU_SERIES,MCU_SERIES))
+$(eval $(call add_qmk_prefix_defs,BOARD,BOARD))
+
# TODO: remove this bodge?
PROJECT_DEFS := $(OPT_DEFS)
PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
@@ -469,6 +493,19 @@ check-size: build
check-md5: build
objs-size: build
+ifeq ($(strip $(TOP_SYMBOLS)),yes)
+all: top-symbols
+check-size: top-symbols
+top-symbols: build
+ echo "###########################################"
+ echo "# Highest flash usage:"
+ $(NM) -Crtd --size-sort $(BUILD_DIR)/$(TARGET).elf | grep -i ' [t] ' | head -n10 | sed -e 's#^0000000# #g' -e 's#^000000# #g' -e 's#^00000# #g' -e 's#^0000# #g' -e 's#^000# #g' -e 's#^00# #g' -e 's#^0# #g'
+ echo "###########################################"
+ echo "# Highest RAM usage:"
+ $(NM) -Crtd --size-sort $(BUILD_DIR)/$(TARGET).elf | grep -i ' [dbv] ' | head -n10 | sed -e 's#^0000000# #g' -e 's#^000000# #g' -e 's#^00000# #g' -e 's#^0000# #g' -e 's#^000# #g' -e 's#^00# #g' -e 's#^0# #g'
+ echo "###########################################"
+endif
+
include $(BUILDDEFS_PATH)/show_options.mk
include $(BUILDDEFS_PATH)/common_rules.mk
diff --git a/builddefs/build_test.mk b/builddefs/build_test.mk
index 5ad33b19c5..64db99fed9 100644
--- a/builddefs/build_test.mk
+++ b/builddefs/build_test.mk
@@ -38,11 +38,11 @@ CREATE_MAP := no
VPATH += \
$(LIB_PATH)/googletest \
$(LIB_PATH)/googlemock \
- $(LIB_PATH)/printf
+ $(COMMON_VPATH) \
+ $(TEST_PATH)
all: elf
-VPATH += $(COMMON_VPATH)
PLATFORM:=TEST
PLATFORM_KEY:=test
BOOTLOADER_TYPE:=none
@@ -63,6 +63,8 @@ include $(TMK_PATH)/protocol.mk
include $(QUANTUM_PATH)/debounce/tests/rules.mk
include $(QUANTUM_PATH)/encoder/tests/rules.mk
include $(QUANTUM_PATH)/sequencer/tests/rules.mk
+include $(QUANTUM_PATH)/wear_leveling/tests/rules.mk
+include $(QUANTUM_PATH)/logging/print.mk
include $(PLATFORM_PATH)/test/rules.mk
ifneq ($(filter $(FULL_TESTS),$(TEST)),)
include $(BUILDDEFS_PATH)/build_full_test.mk
@@ -70,7 +72,6 @@ endif
$(TEST)_SRC += \
tests/test_common/main.c \
- $(LIB_PATH)/printf/printf.c \
$(QUANTUM_PATH)/logging/print.c
$(TEST_OBJ)/$(TEST)_SRC := $($(TEST)_SRC)
diff --git a/builddefs/common_features.mk b/builddefs/common_features.mk
index c976b8296d..8d31f694a7 100644
--- a/builddefs/common_features.mk
+++ b/builddefs/common_features.mk
@@ -15,7 +15,6 @@
QUANTUM_SRC += \
$(QUANTUM_DIR)/quantum.c \
- $(QUANTUM_DIR)/send_string.c \
$(QUANTUM_DIR)/bitwise.c \
$(QUANTUM_DIR)/led.c \
$(QUANTUM_DIR)/action.c \
@@ -92,10 +91,29 @@ ifeq ($(MUSIC_ENABLE), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_music.c
endif
+VALID_STENO_PROTOCOL_TYPES := geminipr txbolt all
+STENO_PROTOCOL ?= all
ifeq ($(strip $(STENO_ENABLE)), yes)
- OPT_DEFS += -DSTENO_ENABLE
- VIRTSER_ENABLE ?= yes
- SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
+ ifeq ($(filter $(STENO_PROTOCOL),$(VALID_STENO_PROTOCOL_TYPES)),)
+ $(call CATASTROPHIC_ERROR,Invalid STENO_PROTOCOL,STENO_PROTOCOL="$(STENO_PROTOCOL)" is not a valid stenography protocol)
+ else
+ OPT_DEFS += -DSTENO_ENABLE
+ VIRTSER_ENABLE ?= yes
+
+ ifeq ($(strip $(STENO_PROTOCOL)), geminipr)
+ OPT_DEFS += -DSTENO_ENABLE_GEMINI
+ endif
+ ifeq ($(strip $(STENO_PROTOCOL)), txbolt)
+ OPT_DEFS += -DSTENO_ENABLE_BOLT
+ endif
+ ifeq ($(strip $(STENO_PROTOCOL)), all)
+ OPT_DEFS += -DSTENO_ENABLE_ALL
+ OPT_DEFS += -DSTENO_ENABLE_GEMINI
+ OPT_DEFS += -DSTENO_ENABLE_BOLT
+ endif
+
+ SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
+ endif
endif
ifeq ($(strip $(VIRTSER_ENABLE)), yes)
@@ -108,15 +126,16 @@ ifeq ($(strip $(MOUSEKEY_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/mousekey.c
endif
-VALID_POINTING_DEVICE_DRIVER_TYPES := adns5050 adns9800 analog_joystick cirque_pinnacle_i2c cirque_pinnacle_spi pmw3360 pmw3389 pimoroni_trackball custom
+VALID_POINTING_DEVICE_DRIVER_TYPES := adns5050 adns9800 analog_joystick cirque_pinnacle_i2c cirque_pinnacle_spi paw3204 pmw3360 pmw3389 pimoroni_trackball custom
ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
ifeq ($(filter $(POINTING_DEVICE_DRIVER),$(VALID_POINTING_DEVICE_DRIVER_TYPES)),)
$(call CATASTROPHIC_ERROR,Invalid POINTING_DEVICE_DRIVER,POINTING_DEVICE_DRIVER="$(POINTING_DEVICE_DRIVER)" is not a valid pointing device type)
else
OPT_DEFS += -DPOINTING_DEVICE_ENABLE
MOUSE_ENABLE := yes
- SRC += $(QUANTUM_DIR)/pointing_device.c
- SRC += $(QUANTUM_DIR)/pointing_device_drivers.c
+ VPATH += $(QUANTUM_DIR)/pointing_device
+ SRC += $(QUANTUM_DIR)/pointing_device/pointing_device.c
+ SRC += $(QUANTUM_DIR)/pointing_device/pointing_device_drivers.c
ifneq ($(strip $(POINTING_DEVICE_DRIVER)), custom)
SRC += drivers/sensors/$(strip $(POINTING_DEVICE_DRIVER)).c
OPT_DEFS += -DPOINTING_DEVICE_DRIVER_$(strip $(shell echo $(POINTING_DEVICE_DRIVER) | tr '[:lower:]' '[:upper:]'))
@@ -131,19 +150,21 @@ ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), cirque_pinnacle_i2c)
OPT_DEFS += -DSTM32_I2C -DHAL_USE_I2C=TRUE
SRC += drivers/sensors/cirque_pinnacle.c
+ SRC += drivers/sensors/cirque_pinnacle_gestures.c
+ SRC += $(QUANTUM_DIR)/pointing_device/pointing_device_gestures.c
QUANTUM_LIB_SRC += i2c_master.c
else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), cirque_pinnacle_spi)
OPT_DEFS += -DSTM32_SPI -DHAL_USE_SPI=TRUE
SRC += drivers/sensors/cirque_pinnacle.c
+ SRC += drivers/sensors/cirque_pinnacle_gestures.c
+ SRC += $(QUANTUM_DIR)/pointing_device/pointing_device_gestures.c
QUANTUM_LIB_SRC += spi_master.c
else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), pimoroni_trackball)
OPT_DEFS += -DSTM32_SPI -DHAL_USE_I2C=TRUE
QUANTUM_LIB_SRC += i2c_master.c
- else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), pmw3360)
- OPT_DEFS += -DSTM32_SPI -DHAL_USE_SPI=TRUE
- QUANTUM_LIB_SRC += spi_master.c
- else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), pmw3389)
+ else ifneq ($(filter $(strip $(POINTING_DEVICE_DRIVER)),pmw3360 pmw3389),)
OPT_DEFS += -DSTM32_SPI -DHAL_USE_SPI=TRUE
+ SRC += drivers/sensors/pmw33xx_common.c
QUANTUM_LIB_SRC += spi_master.c
endif
endif
@@ -154,33 +175,36 @@ ifeq ($(strip $(QUANTUM_PAINTER_ENABLE)), yes)
include $(QUANTUM_DIR)/painter/rules.mk
endif
-VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi
+VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi wear_leveling
EEPROM_DRIVER ?= vendor
ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),)
$(call CATASTROPHIC_ERROR,Invalid EEPROM_DRIVER,EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver)
else
OPT_DEFS += -DEEPROM_ENABLE
+ COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/eeprom
+ COMMON_VPATH += $(DRIVER_PATH)/eeprom
+ COMMON_VPATH += $(PLATFORM_COMMON_DIR)
ifeq ($(strip $(EEPROM_DRIVER)), custom)
# Custom EEPROM implementation -- only needs to implement init/erase/read_block/write_block
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_CUSTOM
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
SRC += eeprom_driver.c
+ else ifeq ($(strip $(EEPROM_DRIVER)), wear_leveling)
+ # Wear-leveling EEPROM implementation
+ OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_WEAR_LEVELING
+ SRC += eeprom_driver.c eeprom_wear_leveling.c
else ifeq ($(strip $(EEPROM_DRIVER)), i2c)
# External I2C EEPROM implementation
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_I2C
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
QUANTUM_LIB_SRC += i2c_master.c
SRC += eeprom_driver.c eeprom_i2c.c
else ifeq ($(strip $(EEPROM_DRIVER)), spi)
# External SPI EEPROM implementation
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_SPI
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
QUANTUM_LIB_SRC += spi_master.c
SRC += eeprom_driver.c eeprom_spi.c
else ifeq ($(strip $(EEPROM_DRIVER)), transient)
# Transient EEPROM implementation -- no data storage but provides runtime area for it
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
SRC += eeprom_driver.c eeprom_transient.c
else ifeq ($(strip $(EEPROM_DRIVER)), vendor)
# Vendor-implemented EEPROM
@@ -191,17 +215,18 @@ else
ifneq ($(filter STM32F3xx_% STM32F1xx_% %_STM32F401xC %_STM32F401xE %_STM32F405xG %_STM32F411xE %_STM32F072xB %_STM32F042x6 %_GD32VF103xB %_GD32VF103x8, $(MCU_SERIES)_$(MCU_LDSCRIPT)),)
# Emulated EEPROM
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_STM32_FLASH_EMULATED
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
- SRC += eeprom_driver.c
- SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
- SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
+ COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/flash
+ COMMON_VPATH += $(DRIVER_PATH)/flash
+ SRC += eeprom_driver.c eeprom_stm32.c flash_stm32.c
else ifneq ($(filter $(MCU_SERIES),STM32L0xx STM32L1xx),)
# True EEPROM on STM32L0xx, L1xx
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_STM32_L0_L1
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
- COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/eeprom
- SRC += eeprom_driver.c
- SRC += eeprom_stm32_L0_L1.c
+ SRC += eeprom_driver.c eeprom_stm32_L0_L1.c
+ else ifneq ($(filter $(MCU_SERIES),RP2040),)
+ # Wear-leveling EEPROM implementation, backed by RP2040 flash
+ OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_WEAR_LEVELING
+ SRC += eeprom_driver.c eeprom_wear_leveling.c
+ WEAR_LEVELING_DRIVER = rp2040_flash
else ifneq ($(filter $(MCU_SERIES),KL2x K20x),)
# Teensy EEPROM implementations
OPT_DEFS += -DEEPROM_TEENSY
@@ -209,32 +234,64 @@ else
else
# Fall back to transient, i.e. non-persistent
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
- COMMON_VPATH += $(DRIVER_PATH)/eeprom
SRC += eeprom_driver.c eeprom_transient.c
endif
else ifeq ($(PLATFORM),ARM_ATSAM)
# arm_atsam EEPROM
OPT_DEFS += -DEEPROM_SAMD
- SRC += $(PLATFORM_COMMON_DIR)/eeprom_samd.c
+ SRC += eeprom_samd.c
else ifeq ($(PLATFORM),TEST)
# Test harness "EEPROM"
OPT_DEFS += -DEEPROM_TEST_HARNESS
- SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
+ SRC += eeprom.c
+ endif
+ endif
+endif
+
+VALID_WEAR_LEVELING_DRIVER_TYPES := custom embedded_flash spi_flash rp2040_flash legacy
+WEAR_LEVELING_DRIVER ?= none
+ifneq ($(strip $(WEAR_LEVELING_DRIVER)),none)
+ ifeq ($(filter $(WEAR_LEVELING_DRIVER),$(VALID_WEAR_LEVELING_DRIVER_TYPES)),)
+ $(call CATASTROPHIC_ERROR,Invalid WEAR_LEVELING_DRIVER,WEAR_LEVELING_DRIVER="$(WEAR_LEVELING_DRIVER)" is not a valid wear leveling driver)
+ else
+ FNV_ENABLE := yes
+ OPT_DEFS += -DWEAR_LEVELING_ENABLE
+ OPT_DEFS += -DWEAR_LEVELING_$(strip $(shell echo $(WEAR_LEVELING_DRIVER) | tr '[:lower:]' '[:upper:]'))
+ COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/wear_leveling
+ COMMON_VPATH += $(DRIVER_PATH)/wear_leveling
+ COMMON_VPATH += $(QUANTUM_DIR)/wear_leveling
+ SRC += wear_leveling.c
+ ifeq ($(strip $(WEAR_LEVELING_DRIVER)), embedded_flash)
+ OPT_DEFS += -DHAL_USE_EFL
+ SRC += wear_leveling_efl.c
+ POST_CONFIG_H += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/wear_leveling/wear_leveling_efl_config.h
+ else ifeq ($(strip $(WEAR_LEVELING_DRIVER)), spi_flash)
+ FLASH_DRIVER := spi
+ SRC += wear_leveling_flash_spi.c
+ POST_CONFIG_H += $(DRIVER_PATH)/wear_leveling/wear_leveling_flash_spi_config.h
+ else ifeq ($(strip $(WEAR_LEVELING_DRIVER)), rp2040_flash)
+ SRC += wear_leveling_rp2040_flash.c
+ POST_CONFIG_H += $(DRIVER_PATH)/wear_leveling/wear_leveling_rp2040_flash_config.h
+ else ifeq ($(strip $(WEAR_LEVELING_DRIVER)), legacy)
+ COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/flash
+ SRC += flash_stm32.c wear_leveling_legacy.c
+ POST_CONFIG_H += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/wear_leveling/wear_leveling_legacy_config.h
endif
endif
endif
VALID_FLASH_DRIVER_TYPES := spi
-FLASH_DRIVER ?= no
-ifneq ($(strip $(FLASH_DRIVER)), no)
+FLASH_DRIVER ?= none
+ifneq ($(strip $(FLASH_DRIVER)), none)
ifeq ($(filter $(FLASH_DRIVER),$(VALID_FLASH_DRIVER_TYPES)),)
- $(error FLASH_DRIVER="$(FLASH_DRIVER)" is not a valid FLASH driver)
+ $(call CATASTROPHIC_ERROR,Invalid FLASH_DRIVER,FLASH_DRIVER="$(FLASH_DRIVER)" is not a valid flash driver)
else
OPT_DEFS += -DFLASH_ENABLE
- ifeq ($(strip $(FLASH_DRIVER)), spi)
+ ifeq ($(strip $(FLASH_DRIVER)),spi)
OPT_DEFS += -DFLASH_DRIVER -DFLASH_SPI
COMMON_VPATH += $(DRIVER_PATH)/flash
SRC += flash_spi.c
+ QUANTUM_LIB_SRC += spi_master.c
endif
endif
endif
@@ -500,7 +557,7 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
endif
endif
-VALID_WS2812_DRIVER_TYPES := bitbang pwm spi i2c
+VALID_WS2812_DRIVER_TYPES := bitbang pwm spi i2c vendor
WS2812_DRIVER ?= bitbang
ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes)
@@ -542,12 +599,6 @@ ifeq ($(strip $(LED_TABLES)), yes)
SRC += $(QUANTUM_DIR)/led_tables.c
endif
-ifeq ($(strip $(TERMINAL_ENABLE)), yes)
- SRC += $(QUANTUM_DIR)/process_keycode/process_terminal.c
- OPT_DEFS += -DTERMINAL_ENABLE
- OPT_DEFS += -DUSER_PRINT
-endif
-
ifeq ($(strip $(VIA_ENABLE)), yes)
DYNAMIC_KEYMAP_ENABLE := yes
RAW_ENABLE := yes
@@ -595,6 +646,14 @@ ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
QUANTUM_SRC += $(QUANTUM_DIR)/debounce/$(strip $(DEBOUNCE_TYPE)).c
endif
+
+VALID_SERIAL_DRIVER_TYPES := bitbang usart vendor
+
+SERIAL_DRIVER ?= bitbang
+ifeq ($(filter $(SERIAL_DRIVER),$(VALID_SERIAL_DRIVER_TYPES)),)
+ $(call CATASTROPHIC_ERROR,Invalid SERIAL_DRIVER,SERIAL_DRIVER="$(SERIAL_DRIVER)" is not a valid SERIAL driver)
+endif
+
ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
POST_CONFIG_H += $(QUANTUM_DIR)/split_common/post_config.h
OPT_DEFS += -DSPLIT_KEYBOARD
@@ -619,11 +678,11 @@ ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
endif
endif
- SERIAL_DRIVER ?= bitbang
OPT_DEFS += -DSERIAL_DRIVER_$(strip $(shell echo $(SERIAL_DRIVER) | tr '[:lower:]' '[:upper:]'))
ifeq ($(strip $(SERIAL_DRIVER)), bitbang)
QUANTUM_LIB_SRC += serial.c
else
+ QUANTUM_LIB_SRC += serial_protocol.c
QUANTUM_LIB_SRC += serial_$(strip $(SERIAL_DRIVER)).c
endif
endif
@@ -635,6 +694,12 @@ ifeq ($(strip $(CRC_ENABLE)), yes)
SRC += crc.c
endif
+ifeq ($(strip $(FNV_ENABLE)), yes)
+ OPT_DEFS += -DFNV_ENABLE
+ VPATH += $(LIB_PATH)/fnv
+ SRC += qmk_fnv_type_validation.c hash_32a.c hash_64a.c
+endif
+
ifeq ($(strip $(HAPTIC_ENABLE)),yes)
COMMON_VPATH += $(DRIVER_PATH)/haptic
@@ -711,6 +776,13 @@ ifeq ($(strip $(MAGIC_ENABLE)), yes)
OPT_DEFS += -DMAGIC_KEYCODE_ENABLE
endif
+SEND_STRING_ENABLE ?= yes
+ifeq ($(strip $(SEND_STRING_ENABLE)), yes)
+ OPT_DEFS += -DSEND_STRING_ENABLE
+ COMMON_VPATH += $(QUANTUM_DIR)/send_string
+ SRC += $(QUANTUM_DIR)/send_string/send_string.c
+endif
+
ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_auto_shift.c
OPT_DEFS += -DAUTO_SHIFT_ENABLE
diff --git a/builddefs/common_rules.mk b/builddefs/common_rules.mk
index d3acddc87b..c8816639f8 100644
--- a/builddefs/common_rules.mk
+++ b/builddefs/common_rules.mk
@@ -1,19 +1,5 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jg Wunsch, et al.
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-#
# Enable vpath seraching for source files only
# Without this, output files, could be read from the wrong .build directories
@@ -38,36 +24,15 @@ NO_LTO_OBJ := $(filter %.a,$(OBJ))
MASTER_OUTPUT := $(firstword $(OUTPUTS))
-
-
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT ?= s
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-#CDEFS +=
-
-
-# Place -D or -U options here for ASM sources
-#ADEFS +=
-
-
-# Place -D or -U options here for C++ sources
-#CXXDEFS += -D__STDC_LIMIT_MACROS
-#CXXDEFS += -D__STDC_CONSTANT_MACROS
-#CXXDEFS +=
+# Compiler flag to set the C and C++ language standard level
+CSTANDARD = -std=gnu11
+CXXSTANDARD = -std=gnu++14
# Speed up recompilations by opt-in usage of ccache
USE_CCACHE ?= no
@@ -75,12 +40,8 @@ ifneq ($(USE_CCACHE),no)
CC_PREFIX ?= ccache
endif
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
+#---------------- C Compiler Options ----------------
+
ifeq ($(strip $(LTO_ENABLE)), yes)
ifeq ($(PLATFORM),ARM_ATSAM)
$(info Enabling LTO on arm_atsam-targeting boards is known to have a high likelihood of failure.)
@@ -111,23 +72,14 @@ CFLAGS += -Wstrict-prototypes
ifneq ($(strip $(ALLOW_WARNINGS)), yes)
CFLAGS += -Werror
endif
-#CFLAGS += -mshort-calls
-#CFLAGS += -fno-unit-at-a-time
-#CFLAGS += -Wundef
-#CFLAGS += -Wunreachable-code
-#CFLAGS += -Wsign-compare
CFLAGS += $(CSTANDARD)
# This fixes lots of keyboards linking errors but SHOULDN'T BE A FINAL SOLUTION
# Fixing of multiple variable definitions must be made.
CFLAGS += -fcommon
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
+#---------------- C++ Compiler Options ----------------
+
ifeq ($(strip $(DEBUG_ENABLE)),yes)
CXXFLAGS += -g$(DEBUG)
endif
@@ -141,57 +93,17 @@ CXXFLAGS += -Wundef
ifneq ($(strip $(ALLOW_WARNINGS)), yes)
CXXFLAGS += -Werror
endif
-#CXXFLAGS += -mshort-calls
-#CXXFLAGS += -fno-unit-at-a-time
-#CXXFLAGS += -Wstrict-prototypes
-#CXXFLAGS += -Wunreachable-code
-#CXXFLAGS += -Wsign-compare
-#CXXFLAGS += $(CSTANDARD)
#---------------- Assembler Options ----------------
+
ASFLAGS += $(ADEFS)
ifeq ($(VERBOSE_AS_CMD),yes)
ASFLAGS += -v
endif
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-CREATE_MAP ?= yes
-
-
#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-#
-# Comennt out "--relax" option to avoid a error such:
-# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12'
-#
+CREATE_MAP ?= yes
ifeq ($(CREATE_MAP),yes)
LDFLAGS += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
endif
@@ -201,20 +113,11 @@ endif
#LDFLAGS += -Wl,--relax
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
+LDFLAGS += -lm
# You can give EXTRALDFLAGS at 'make' command line.
LDFLAGS += $(EXTRALDFLAGS)
#---------------- Assembler Listings ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
ADHLNS_ENABLE ?= no
ifeq ($(ADHLNS_ENABLE),yes)
@@ -468,6 +371,7 @@ show_path:
dump_vars: ERROR_IF_EMPTY=""
dump_vars: ERROR_IF_NONBOOL=""
dump_vars: ERROR_IF_UNSET=""
+dump_vars: CATASTROPHIC_ERROR=""
dump_vars:
@$(foreach V,$(sort $(.VARIABLES)),$(if $(filter-out environment% default automatic,$(origin $V)),$(info $V=$($V))))
diff --git a/builddefs/mcu_selection.mk b/builddefs/mcu_selection.mk
index d5fb731e08..7528aa6842 100644
--- a/builddefs/mcu_selection.mk
+++ b/builddefs/mcu_selection.mk
@@ -87,6 +87,33 @@ ifneq ($(findstring MK20DX256, $(MCU)),)
BOARD ?= PJRC_TEENSY_3_1
endif
+ifneq ($(findstring MK64FX512, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = K60x
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= MK64FX512
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= k60x
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= PJRC_TEENSY_3_5
+endif
+
ifneq ($(findstring MK66FX1M0, $(MCU)),)
# Cortex version
MCU = cortex-m4
@@ -116,6 +143,41 @@ ifneq ($(findstring MK66FX1M0, $(MCU)),)
BOARD ?= PJRC_TEENSY_3_6
endif
+ifneq ($(findstring RP2040, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m0plus
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ CHIBIOS_PORT = ARMv6-M-RP2
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = RP
+ MCU_SERIES = RP2040
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ STARTUPLD_CONTRIB = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld
+ MCU_LDSCRIPT ?= RP2040_FLASH_TIMECRIT
+ LDFLAGS += -L $(STARTUPLD_CONTRIB)
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= rp2040
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_PROMICRO_RP2040
+
+ # Default UF2 Bootloader settings
+ UF2_FAMILY ?= RP2040
+ FIRMWARE_FORMAT ?= uf2
+endif
+
ifneq ($(findstring STM32F042, $(MCU)),)
# Cortex version
MCU = cortex-m0
diff --git a/builddefs/show_options.mk b/builddefs/show_options.mk
index f67d009191..98537e6da2 100644
--- a/builddefs/show_options.mk
+++ b/builddefs/show_options.mk
@@ -5,7 +5,6 @@ BUILD_OPTION_NAMES = \
CONSOLE_ENABLE \
COMMAND_ENABLE \
NKRO_ENABLE \
- TERMINAL_ENABLE \
CUSTOM_MATRIX \
DEBOUNCE_TYPE \
SPLIT_KEYBOARD \
@@ -46,6 +45,7 @@ OTHER_OPTION_NAMES = \
LEADER_ENABLE \
PRINTING_ENABLE \
STENO_ENABLE \
+ STENO_PROTOCOL \
TAP_DANCE_ENABLE \
VIRTSER_ENABLE \
OLED_ENABLE \
diff --git a/builddefs/testlist.mk b/builddefs/testlist.mk
index b8d22bce80..8a30a44972 100644
--- a/builddefs/testlist.mk
+++ b/builddefs/testlist.mk
@@ -4,6 +4,7 @@ FULL_TESTS := $(notdir $(TEST_LIST))
include $(QUANTUM_PATH)/debounce/tests/testlist.mk
include $(QUANTUM_PATH)/encoder/tests/testlist.mk
include $(QUANTUM_PATH)/sequencer/tests/testlist.mk
+include $(QUANTUM_PATH)/wear_leveling/tests/testlist.mk
include $(PLATFORM_PATH)/test/testlist.mk
define VALIDATE_TEST_LIST