diff options
17 files changed, 432 insertions, 232 deletions
diff --git a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/4x5/4x5.c index 17caecb4fd..78c0fee819 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c +++ b/keyboards/handwired/dactyl_manuform/4x5/4x5.c @@ -1,4 +1,4 @@ -#include "dactyl_manuform.h" +#include "4x5.h" #ifdef SSD1306OLED diff --git a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/4x5/4x5.h index 7e126d3017..b34d97adbf 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h +++ b/keyboards/handwired/dactyl_manuform/4x5/4x5.h @@ -1,5 +1,4 @@ -#ifndef REV2_H -#define REV2_H +#pragma once #include "dactyl_manuform.h" @@ -68,4 +67,4 @@ \ } #endif -#endif + diff --git a/keyboards/handwired/dactyl_manuform/4x5/config.h b/keyboards/handwired/dactyl_manuform/4x5/config.h index 8917630e4a..c8417a2f0f 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/config.h +++ b/keyboards/handwired/dactyl_manuform/4x5/config.h @@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -26,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x3060 #define DEVICE_VER 0x0001 #define MANUFACTURER tshort -#define PRODUCT Dactyl-Manuform #define DESCRIPTION A split keyboard for the cheap makers /* key matrix size */ @@ -45,53 +43,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* number of backlight levels */ // #define BACKLIGHT_LEVELS 3 -/* mouse config */ -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_DELAY 0 -#define MOUSEKEY_TIME_TO_MAX 60 -#define MOUSEKEY_MAX_SPEED 7 -#define MOUSEKEY_WHEEL_DELAY 0 -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* Enables This makes it easier for fast typists to use dual-function keys */ -#define PERMISSIVE_HOLD - -/* ws2812 RGB LED */ -#define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 12 // Number of LEDs -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - - -#endif diff --git a/keyboards/handwired/dactyl_manuform/4x5/rules.mk b/keyboards/handwired/dactyl_manuform/4x5/rules.mk index 99ac2880d5..14b6e1e4e3 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/rules.mk +++ b/keyboards/handwired/dactyl_manuform/4x5/rules.mk @@ -1,47 +1,3 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # Build Options # change to "no" to disable the options, or define them in the Makefile in @@ -59,10 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SUBPROJECT_rev1 = yes -USE_I2C = yes + # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -SPLIT_KEYBOARD = yes - diff --git a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/5x6/5x6.c index 17caecb4fd..68fceffd92 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c +++ b/keyboards/handwired/dactyl_manuform/5x6/5x6.c @@ -1,4 +1,4 @@ -#include "dactyl_manuform.h" +#include "5x6.h" #ifdef SSD1306OLED diff --git a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/5x6/5x6.h index 5c1a4339bd..cb225a2cf2 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h +++ b/keyboards/handwired/dactyl_manuform/5x6/5x6.h @@ -1,5 +1,4 @@ -#ifndef REV2_H -#define REV2_H +#pragma once #include "dactyl_manuform.h" @@ -44,4 +43,4 @@ { R50, R51, R52, R53, KC_NO, KC_NO }, \ } -#endif + diff --git a/keyboards/handwired/dactyl_manuform/5x6/config.h b/keyboards/handwired/dactyl_manuform/5x6/config.h index 97495e9350..06ac02dfcb 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6/config.h @@ -16,18 +16,12 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER tshort -#define PRODUCT Dactyl-Manuform -#define DESCRIPTION A split keyboard for the cheap makers + +#define PRODUCT Dactyl-Manuform (5x6) /* key matrix size */ // Rows are doubled-up @@ -45,53 +39,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* number of backlight levels */ // #define BACKLIGHT_LEVELS 3 -/* mouse config */ -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_DELAY 0 -#define MOUSEKEY_TIME_TO_MAX 60 -#define MOUSEKEY_MAX_SPEED 7 -#define MOUSEKEY_WHEEL_DELAY 0 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* Enables This makes it easier for fast typists to use dual-function keys */ -#define PERMISSIVE_HOLD - -/* ws2812 RGB LED */ -#define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 12 // Number of LEDs -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - - -#endif diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/config.h b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/config.h new file mode 100644 index 0000000000..29ab59ad66 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/config.h @@ -0,0 +1,27 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + + +#pragma once + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define MASTER_RIGHT +//#define EE_HANDS +// Rows are doubled-up diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c new file mode 100644 index 0000000000..d0bcbd4e6b --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c @@ -0,0 +1,71 @@ +#include QMK_KEYBOARD_H + + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 + +#define SFT_ESC SFT_T(KC_ESC) +#define CTL_BSPC CTL_T(KC_BSPC) +#define ALT_SPC ALT_T(KC_SPC) +#define SFT_ENT SFT_T(KC_ENT) + +#define KC_ML KC_MS_LEFT +#define KC_MR KC_MS_RIGHT +#define KC_MU KC_MS_UP +#define KC_MD KC_MS_DOWN +#define KC_MB1 KC_MS_BTN1 +#define KC_MB2 KC_MS_BTN1 +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) + +#define _______ KC_TRNS + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + + [_QWERTY] = LAYOUT_5x6( + KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, + KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, + KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, + KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH, + KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL, + RAISE,KC_SPC, KC_ENT, LOWER, + KC_TAB,KC_HOME, KC_END, KC_DEL, + KC_BSPC, KC_GRV, KC_LGUI, KC_LALT + ), + + [_LOWER] = LAYOUT_5x6( + + KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL, + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, + _______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE, + _______,_______,_______,_______,_______,_______, _______, KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS, + _______,KC_PSCR, _______, KC_P0, + _______,_______, _______,_______, + _______,_______, _______,_______, + _______,_______, _______,_______ +), + + [_RAISE] = LAYOUT_5x6( + KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE, + _______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, + _______,_______, KC_EQL ,_______, + _______,_______, _______,_______, + _______,_______, _______,_______, + _______,_______, _______,_______ + ), + + }; + diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h index 1a7d1e0659..d046806eaa 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h @@ -15,6 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#pragma once #define USE_SERIAL @@ -22,7 +23,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define MASTER_RIGHT //#define EE_HANDS // Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_COLS 6 - -#include "../../config.h" diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c index 7dd9f7c869..0282ccc7f9 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c @@ -1,6 +1,4 @@ -#include "dactyl_manuform.h" -#include "action_layer.h" -#include "eeconfig.h" +#include QMK_KEYBOARD_H extern keymap_config_t keymap_config; @@ -33,18 +31,18 @@ extern keymap_config_t keymap_config; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_5x6( - KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, - KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, - KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, - KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH, - KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL, - RAISE,KC_SPC, KC_ENT, LOWER, - KC_TAB,KC_HOME, KC_END, KC_DEL, - KC_BSPC, KC_GRV, KC_LGUI, KC_LALT - ), + [_QWERTY] = LAYOUT_5x6( + KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, + KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, + KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, + KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH, + KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL, + RAISE,KC_SPC, KC_ENT, LOWER, + KC_TAB,KC_HOME, KC_END, KC_DEL, + KC_BSPC, KC_GRV, KC_LGUI, KC_LALT + ), - [_LOWER] = LAYOUT_5x6( + [_LOWER] = LAYOUT_5x6( KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL, _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, _______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE, diff --git a/keyboards/handwired/dactyl_manuform/5x6/rules.mk b/keyboards/handwired/dactyl_manuform/5x6/rules.mk index 6b1201781a..14b6e1e4e3 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x6/rules.mk @@ -1,47 +1,3 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # Build Options # change to "no" to disable the options, or define them in the Makefile in @@ -59,9 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SUBPROJECT_rev1 = yes -USE_I2C = yes + # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -SPLIT_KEYBOARD = yes
\ No newline at end of file diff --git a/keyboards/handwired/dactyl_manuform/config.h b/keyboards/handwired/dactyl_manuform/config.h new file mode 100644 index 0000000000..19cd356d89 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/config.h @@ -0,0 +1,78 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER tshort +// defined in subfolder +#define DESCRIPTION A split keyboard for the cheap makers + +/* mouse config */ +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 60 +#define MOUSEKEY_MAX_SPEED 7 +#define MOUSEKEY_WHEEL_DELAY 0 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Enables This makes it easier for fast typists to use dual-function keys */ +#define PERMISSIVE_HOLD + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/dactyl_manuform.c new file mode 100644 index 0000000000..043bbd5672 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/dactyl_manuform.c @@ -0,0 +1 @@ +#include "dactyl_manuform.h" diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h new file mode 100644 index 0000000000..6c23e9143d --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h @@ -0,0 +1,22 @@ +#pragma once + + +#ifdef KEYBOARD_handwired_dactyl_manuform_5x6 + #include "5x6.h" +#elif KEYBOARD_handwired_dactyl_manuform_4x5 + #include "4x5.h" +#endif + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + + +#ifdef USE_I2C +#include <stddef.h> +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/interrupt.h> +#endif +#endif + + diff --git a/keyboards/handwired/dactyl_manuform/readme.md b/keyboards/handwired/dactyl_manuform/readme.md new file mode 100644 index 0000000000..eb76a7150e --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/readme.md @@ -0,0 +1,142 @@ +Dactyl Manuform 5x6 +====== +the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. + + + +## First Time Setup + +Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: + +``` +$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME +``` + +If everything worked correctly you will see a file: + +``` +dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex +``` + +For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. + +## Keymaps +Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. +### Impstyle + + + +Required Hardware +----------------- + +Apart from diodes and key switches for the keyboard matrix in each half, you +will need: + +* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. +* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable + +Alternatively, you can use any sort of cable and socket that has at least 3 +wires. If you want to use I2C to communicate between halves, you will need a +cable with at least 4 wires and 2x 4.7kΩ pull-up resistors + +Optional Hardware +----------------- +A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. + +Wiring +------ + +The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. +PD0 on the ATmega32u4) between the two Pro Micros. + +Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro +and modify the `matrix.c` accordingly. + +The wiring for serial: + + + +The wiring for i2c: + + + +The pull-up resistors may be placed on either half. It is also possible +to use 4 resistors and have the pull-ups in both halves, but this is +unnecessary in simple use cases. + +You can change your configuration between serial and i2c by modifying your `config.h` file. + +Notes on Software Configuration +------------------------------- + +the keymaps in here are for the 4x5 layout of the keyboard only. + +Flashing +------- +From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. +Example: `make lets_split/rev2:default:avrdude` + + +Choosing which board to plug the USB cable into (choosing Master) +-------- +Because the two boards are identical, the firmware has logic to differentiate the left and right board. + +It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. + +The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. + +The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. + +### Setting the left hand as master +If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. + +### Setting the right hand as master +If you always plug the usb cable into the right board, add an extra flag to your `config.h` +``` + #define MASTER_RIGHT +``` + +### Setting EE_hands to use either hands as master +If you define `EE_HANDS` in your `config.h`, you will need to set the +EEPROM for the left and right halves. + +The EEPROM is used to store whether the +half is left handed or right handed. This makes it so that the same firmware +file will run on both hands instead of having to flash left and right handed +versions of the firmware to each half. To flash the EEPROM file for the left +half run: +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep +// or the equivalent in dfu-programmer + +``` +and similarly for right half +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep +// or the equivalent in dfu-programmer +``` + +NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) + +After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. + +Note that you need to program both halves, but you have the option of using +different keymaps for each half. You could program the left half with a QWERTY +layout and the right half with a Colemak layout using bootmagic's default layout option. +Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the +right half is connected. + + +Notes on Using Pro Micro 3.3V +----------------------------- + +Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects +the frequency on the 3.3V board. + +Also, if the slave board is producing weird characters in certain columns, +update the following line in `matrix.c` to the following: + +``` +// _delay_us(30); // without this wait read unstable value. +_delay_us(300); // without this wait read unstable value. +``` diff --git a/keyboards/handwired/dactyl_manuform/rules.mk b/keyboards/handwired/dactyl_manuform/rules.mk new file mode 100644 index 0000000000..adb058c8af --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/rules.mk @@ -0,0 +1,66 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +SPLIT_KEYBOARD = yes |