diff options
| -rw-r--r-- | BUILD_GUIDE.md | 6 | ||||
| -rw-r--r-- | keyboard/retro_refit/Makefile | 23 | ||||
| -rw-r--r-- | keyboard/retro_refit/config.h | 47 | ||||
| -rw-r--r-- | quantum/template/Makefile | 23 | ||||
| -rw-r--r-- | quantum/template/config.h | 47 | ||||
| -rw-r--r-- | tmk_core/common/command.c | 353 | ||||
| -rw-r--r-- | tmk_core/common/command.h | 121 | ||||
| -rw-r--r-- | tmk_core/common/keyboard.c | 6 |
8 files changed, 491 insertions, 135 deletions
diff --git a/BUILD_GUIDE.md b/BUILD_GUIDE.md index 81c3ec44f2..e8b242e4e3 100644 --- a/BUILD_GUIDE.md +++ b/BUILD_GUIDE.md @@ -25,12 +25,12 @@ You can also try these instructions: 3. Install [DFU-Programmer][dfu-prog]. ### Linux -Install AVR GCC and dfu-progammer with your favorite package manager. +Install AVR GCC, AVR libc, and dfu-progammer with your favorite package manager. Debian/Ubuntu example: sudo apt-get update - sudo apt-get install gcc-avr dfu-programmer + sudo apt-get install gcc-avr avr-libc dfu-programmer ### Vagrant If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](VAGRANT_GUIDE.md). @@ -52,4 +52,4 @@ If you have any problems building the firmware, you can try using a tool called ## Troubleshooting 1. Try running `make clean` if the make command fails. - WIP
\ No newline at end of file + WIP diff --git a/keyboard/retro_refit/Makefile b/keyboard/retro_refit/Makefile index ec51227ff1..918b430719 100644 --- a/keyboard/retro_refit/Makefile +++ b/keyboard/retro_refit/Makefile @@ -113,18 +113,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID +# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +# MIDI_ENABLE = YES # MIDI controls +# UNICODE_ENABLE = YES # Unicode +# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID # Optimize size but this may cause error "relocation truncated to fit" diff --git a/keyboard/retro_refit/config.h b/keyboard/retro_refit/config.h index ba9a861edd..05fceb92b2 100644 --- a/keyboard/retro_refit/config.h +++ b/keyboard/retro_refit/config.h @@ -53,11 +53,54 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* key combination for command */ + +/* Force NKRO Mode - If forced on, must be disabled via magic key (default = LShift+RShift+N) */ +#define FORCE_NKRO + +/* + * Magic key options + * These options allow the magic key functionality to be changed. This is useful + * if your keyboard/keypad is missing keys and you want magic key support. + */ + +/* key combination for magic key command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* remap magic keys */ +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +#define MAGIC_KEY_LOCK BSLS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + /* * Feature disable options * These options are also useful to firmware size reduction. @@ -76,4 +119,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION -#endif +#endif
\ No newline at end of file diff --git a/quantum/template/Makefile b/quantum/template/Makefile index 2efa691380..4fa195468d 100644 --- a/quantum/template/Makefile +++ b/quantum/template/Makefile @@ -113,18 +113,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID +# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +# MIDI_ENABLE = YES # MIDI controls +# UNICODE_ENABLE = YES # Unicode +# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID # Optimize size but this may cause error "relocation truncated to fit" diff --git a/quantum/template/config.h b/quantum/template/config.h index 7d6149f436..dae4b63130 100644 --- a/quantum/template/config.h +++ b/quantum/template/config.h @@ -55,11 +55,56 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* key combination for command */ +/* Force NKRO Mode - If forced on, must be disabled via magic key (default = LShift+RShift+N) */ +//#define FORCE_NKRO + +/* + * Magic key options + * These options allow the magic key functionality to be changed. This is useful + * if your keyboard/keypad is missing keys and you want magic key support. + */ + +/* key combination for magic key command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/tmk_core/common/command.c b/tmk_core/common/command.c index d59bb01bbc..b4cd3ca56b 100644 --- a/tmk_core/common/command.c +++ b/tmk_core/common/command.c @@ -52,6 +52,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. static bool command_common(uint8_t code); static void command_common_help(void); +static void print_version(void); +static void print_status(void); static bool command_console(uint8_t code); static void command_console_help(void); #ifdef MOUSEKEY_ENABLE @@ -112,35 +114,140 @@ bool command_console_extra(uint8_t code) ***********************************************************/ static void command_common_help(void) { - print("\n\t- Magic -\n" - "d: debug\n" - "x: debug matrix\n" - "k: debug keyboard\n" - "m: debug mouse\n" - "v: version\n" - "s: status\n" - "c: console mode\n" - "0-4: layer0-4(F10-F4)\n" - "Paus: bootloader\n" + print( "\n\t- Magic -\n" + STR(MAGIC_KEY_DEBUG ) ": Debug Message Toggle\n" + STR(MAGIC_KEY_DEBUG_MATRIX) ": Matrix Debug Mode Toggle - Show keypresses in matrix grid\n" + STR(MAGIC_KEY_DEBUG_KBD ) ": Keyboard Debug Toggle - Show keypress report\n" + STR(MAGIC_KEY_DEBUG_MOUSE ) ": Debug Mouse Toggle\n" + STR(MAGIC_KEY_VERSION ) ": Version\n" + STR(MAGIC_KEY_STATUS ) ": Status\n" + STR(MAGIC_KEY_CONSOLE ) ": Activate Console Mode\n" + +#if MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM + STR(MAGIC_KEY_LAYER0 ) ": Switch to Layer 0\n" + STR(MAGIC_KEY_LAYER1 ) ": Switch to Layer 1\n" + STR(MAGIC_KEY_LAYER2 ) ": Switch to Layer 2\n" + STR(MAGIC_KEY_LAYER3 ) ": Switch to Layer 3\n" + STR(MAGIC_KEY_LAYER4 ) ": Switch to Layer 4\n" + STR(MAGIC_KEY_LAYER5 ) ": Switch to Layer 5\n" + STR(MAGIC_KEY_LAYER6 ) ": Switch to Layer 6\n" + STR(MAGIC_KEY_LAYER7 ) ": Switch to Layer 7\n" + STR(MAGIC_KEY_LAYER8 ) ": Switch to Layer 8\n" + STR(MAGIC_KEY_LAYER9 ) ": Switch to Layer 9\n" +#endif + +#if MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS + "F1-F10: Switch to Layer 0-9 (F10 = L0)\n" +#endif + +#if MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS + "0-9: Switch to Layer 0-9\n" +#endif + + STR(MAGIC_KEY_LAYER0_ALT1 ) ": Switch to Layer 0 (alternate key 1)\n" + STR(MAGIC_KEY_LAYER0_ALT2 ) ": Switch to Layer 0 (alternate key 2)\n" + STR(MAGIC_KEY_BOOTLOADER ) ": Jump to Bootloader (Reset)\n" #ifdef KEYBOARD_LOCK_ENABLE - "Caps: Lock\n" + STR(MAGIC_KEY_LOCK ) ": Lock\n" #endif #ifdef BOOTMAGIC_ENABLE - "e: eeprom\n" + STR(MAGIC_KEY_EEPROM ) ": Print EEPROM Settings\n" #endif #ifdef NKRO_ENABLE - "n: NKRO\n" + STR(MAGIC_KEY_NKRO ) ": NKRO Toggle\n" #endif #ifdef SLEEP_LED_ENABLE - "z: sleep LED test\n" + STR(MAGIC_KEY_SLEEP_LED ) ": Sleep LED Test\n" #endif ); } +static void print_version(void) +{ + // print version & information + print("\n\t- Version -\n"); + print("DESC: " STR(DESCRIPTION) "\n"); + print("VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") " + "PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") " + "VER: " STR(DEVICE_VER) "\n"); + print("BUILD: " STR(VERSION) " (" __TIME__ " " __DATE__ ")\n"); + + /* build options */ + print("OPTIONS:" + +#ifdef PROTOCOL_PJRC + " PJRC" +#endif +#ifdef PROTOCOL_LUFA + " LUFA" +#endif +#ifdef PROTOCOL_VUSB + " VUSB" +#endif +#ifdef BOOTMAGIC_ENABLE + " BOOTMAGIC" +#endif +#ifdef MOUSEKEY_ENABLE + " MOUSEKEY" +#endif +#ifdef EXTRAKEY_ENABLE + " EXTRAKEY" +#endif +#ifdef CONSOLE_ENABLE + " CONSOLE" +#endif +#ifdef COMMAND_ENABLE + " COMMAND" +#endif +#ifdef NKRO_ENABLE + " NKRO" +#endif +#ifdef KEYMAP_SECTION_ENABLE + " KEYMAP_SECTION" +#endif + + " " STR(BOOTLOADER_SIZE) "\n"); + + print("GCC: " STR(__GNUC__) "." STR(__GNUC_MINOR__) "." STR(__GNUC_PATCHLEVEL__) + " AVR-LIBC: " __AVR_LIBC_VERSION_STRING__ + " AVR_ARCH: avr" STR(__AVR_ARCH__) "\n"); + + return; +} + +static void print_status(void) +{ + + print("\n\t- Status -\n"); + + print_val_hex8(host_keyboard_leds()); + print_val_hex8(keyboard_protocol); + print_val_hex8(keyboard_idle); +#ifdef NKRO_ENABLE + print_val_hex8(keyboard_nkro); +#endif + print_val_hex32(timer_count); + +#ifdef PROTOCOL_PJRC + print_val_hex8(UDCON); + print_val_hex8(UDIEN); + print_val_hex8(UDINT); + print_val_hex8(usb_keyboard_leds); + print_val_hex8(usb_keyboard_idle_count); +#endif + +#ifdef PROTOCOL_PJRC +# if USB_COUNT_SOF + print_val_hex8(usbSofCount); +# endif +#endif + return; +} + #ifdef BOOTMAGIC_ENABLE static void print_eeconfig(void) { @@ -178,24 +285,36 @@ static void print_eeconfig(void) static bool command_common(uint8_t code) { + +#ifdef KEYBOARD_LOCK_ENABLE static host_driver_t *host_driver = 0; +#endif + switch (code) { + #ifdef SLEEP_LED_ENABLE - case KC_Z: - // test breathing sleep LED - print("Sleep LED test\n"); + + // test breathing sleep LED + case MAGIC_KC(MAGIC_KEY_SLEEP_LED): + print("Sleep LED Test\n"); sleep_led_toggle(); led_set(host_keyboard_leds()); break; #endif + #ifdef BOOTMAGIC_ENABLE - case KC_E: + + // print stored eeprom config + case MAGIC_KC(MAGIC_KEY_EEPROM): print("eeconfig:\n"); print_eeconfig(); break; #endif + #ifdef KEYBOARD_LOCK_ENABLE - case KC_CAPSLOCK: + + // lock/unlock keyboard + case MAGIC_KC(MAGIC_KEY_LOCK): if (host_get_driver()) { host_driver = host_get_driver(); clear_keyboard(); @@ -207,11 +326,15 @@ static bool command_common(uint8_t code) } break; #endif - case KC_H: - case KC_SLASH: /* ? */ + + // print help + case MAGIC_KC(MAGIC_KEY_HELP1): + case MAGIC_KC(MAGIC_KEY_HELP2): command_common_help(); break; - case KC_C: + + // activate console + case MAGIC_KC(MAGIC_KEY_CONSOLE): debug_matrix = false; debug_keyboard = false; debug_mouse = false; @@ -220,25 +343,33 @@ static bool command_common(uint8_t code) print("C> "); command_state = CONSOLE; break; - case KC_PAUSE: - clear_keyboard(); - print("\n\nbootloader... "); + + // jump to bootloader + case MAGIC_KC(MAGIC_KEY_BOOTLOADER): + clear_keyboard(); // clear to prevent stuck keys + print("\n\nJumping to bootloader... "); _delay_ms(1000); bootloader_jump(); // not return break; - case KC_D: + + // debug toggle + case MAGIC_KC(MAGIC_KEY_DEBUG): + debug_enable = !debug_enable; if (debug_enable) { + print("\ndebug: on\n"); + debug_matrix = true; + debug_keyboard = true; + debug_mouse = true; + } else { print("\ndebug: off\n"); debug_matrix = false; debug_keyboard = false; debug_mouse = false; - debug_enable = false; - } else { - print("\ndebug: on\n"); - debug_enable = true; } break; - case KC_X: // debug matrix toggle + + // debug matrix toggle + case MAGIC_KC(MAGIC_KEY_DEBUG_MATRIX): debug_matrix = !debug_matrix; if (debug_matrix) { print("\nmatrix: on\n"); @@ -247,7 +378,9 @@ static bool command_common(uint8_t code) print("\nmatrix: off\n"); } break; - case KC_K: // debug keyboard toggle + + // debug keyboard toggle + case MAGIC_KC(MAGIC_KEY_DEBUG_KBD): debug_keyboard = !debug_keyboard; if (debug_keyboard) { print("\nkeyboard: on\n"); @@ -256,87 +389,33 @@ static bool command_common(uint8_t code) print("\nkeyboard: off\n"); } break; - case KC_M: // debug mouse toggle + + // debug mouse toggle + case MAGIC_KC(MAGIC_KEY_DEBUG_MOUSE): debug_mouse = !debug_mouse; if (debug_mouse) { print("\nmouse: on\n"); debug_enable = true; } else { - print("\nmouse: off\n"); + print("\nmouse: off\n"); } break; - case KC_V: // print version & information - print("\n\t- Version -\n"); - print("DESC: " STR(DESCRIPTION) "\n"); - print("VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") " - "PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") " - "VER: " STR(DEVICE_VER) "\n"); - print("BUILD: " STR(VERSION) " (" __TIME__ " " __DATE__ ")\n"); - /* build options */ - print("OPTIONS:" -#ifdef PROTOCOL_PJRC - " PJRC" -#endif -#ifdef PROTOCOL_LUFA - " LUFA" -#endif -#ifdef PROTOCOL_VUSB - " VUSB" -#endif -#ifdef BOOTMAGIC_ENABLE - " BOOTMAGIC" -#endif -#ifdef MOUSEKEY_ENABLE - " MOUSEKEY" -#endif -#ifdef EXTRAKEY_ENABLE - " EXTRAKEY" -#endif -#ifdef CONSOLE_ENABLE - " CONSOLE" -#endif -#ifdef COMMAND_ENABLE - " COMMAND" -#endif -#ifdef NKRO_ENABLE - " NKRO" -#endif -#ifdef KEYMAP_SECTION_ENABLE - " KEYMAP_SECTION" -#endif - " " STR(BOOTLOADER_SIZE) "\n"); - print("GCC: " STR(__GNUC__) "." STR(__GNUC_MINOR__) "." STR(__GNUC_PATCHLEVEL__) - " AVR-LIBC: " __AVR_LIBC_VERSION_STRING__ - " AVR_ARCH: avr" STR(__AVR_ARCH__) "\n"); - break; - case KC_S: - print("\n\t- Status -\n"); - print_val_hex8(host_keyboard_leds()); - print_val_hex8(keyboard_protocol); - print_val_hex8(keyboard_idle); -#ifdef NKRO_ENABLE - print_val_hex8(keyboard_nkro); -#endif - print_val_hex32(timer_count); - -#ifdef PROTOCOL_PJRC - print_val_hex8(UDCON); - print_val_hex8(UDIEN); - print_val_hex8(UDINT); - print_val_hex8(usb_keyboard_leds); - print_val_hex8(usb_keyboard_idle_count); -#endif + // print version + case MAGIC_KC(MAGIC_KEY_VERSION): + print_version(); + break; -#ifdef PROTOCOL_PJRC -# if USB_COUNT_SOF - print_val_hex8(usbSofCount); -# endif -#endif + // print status + case MAGIC_KC(MAGIC_KEY_STATUS): + print_status(); break; + #ifdef NKRO_ENABLE - case KC_N: - clear_keyboard(); //Prevents stuck keys. + + // NKRO toggle + case MAGIC_KC(MAGIC_KEY_NKRO): + clear_keyboard(); // clear to prevent stuck keys keyboard_nkro = !keyboard_nkro; if (keyboard_nkro) print("NKRO: on\n"); @@ -344,18 +423,78 @@ static bool command_common(uint8_t code) print("NKRO: off\n"); break; #endif - case KC_ESC: - case KC_GRV: - case KC_0: + + // switch layers + + case MAGIC_KC(MAGIC_KEY_LAYER0_ALT1): + case MAGIC_KC(MAGIC_KEY_LAYER0_ALT2): + switch_default_layer(0); + break; + +#if MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM + + case MAGIC_KC(MAGIC_KEY_LAYER0): + switch_default_layer(0); + break; + + case MAGIC_KC(MAGIC_KEY_LAYER1): + switch_default_layer(1); + break; + + case MAGIC_KC(MAGIC_KEY_LAYER2): + switch_default_layer(2); + break; + + case MAGIC_KC(MAGIC_KEY_LAYER3): + switch_default_layer(3); + break; + + case MAGIC_KC(MAGIC_KEY_LAYER4): + switch_default_layer(4); + break; + + case MAGIC_KC(MAGIC_KEY_LAYER5): + switch_default_layer(5); + break; + + case MAGIC_KC(MAGIC_KEY_LAYER6): + switch_default_layer(6); + break; + + case MAGIC_KC(MAGIC_KEY_LAYER7): + switch_default_layer(7); + break; + + case MAGIC_KC(MAGIC_KEY_LAYER8): + switch_default_layer(8); + break; + + case MAGIC_KC(MAGIC_KEY_LAYER9): + switch_default_layer(9); + break; +#endif + + +#if MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS + + case KC_F1 ... KC_F9: + switch_default_layer((code - KC_F1) + 1); + break; case KC_F10: switch_default_layer(0); break; +#endif + +#if MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS + case KC_1 ... KC_9: switch_default_layer((code - KC_1) + 1); break; - case KC_F1 ... KC_F9: - switch_default_layer((code - KC_F1) + 1); + case KC_0: + switch_default_layer(0); break; +#endif + default: print("?"); return false; diff --git a/tmk_core/common/command.h b/tmk_core/common/command.h index b57a6c1ced..92b18849bf 100644 --- a/tmk_core/common/command.h +++ b/tmk_core/common/command.h @@ -32,4 +32,125 @@ bool command_proc(uint8_t code); #define command_proc(code) false #endif + +#ifndef MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +#endif + +#ifndef MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +#endif + +#ifndef MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false +#endif + +#ifndef MAGIC_KEY_HELP1 +#define MAGIC_KEY_HELP1 H +#endif + +#ifndef MAGIC_KEY_HELP2 +#define MAGIC_KEY_HELP2 SLASH +#endif + +#ifndef MAGIC_KEY_DEBUG +#define MAGIC_KEY_DEBUG D +#endif + +#ifndef MAGIC_KEY_DEBUG_MATRIX +#define MAGIC_KEY_DEBUG_MATRIX X +#endif + +#ifndef MAGIC_KEY_DEBUG_KBD +#define MAGIC_KEY_DEBUG_KBD K +#endif + +#ifndef MAGIC_KEY_DEBUG_MOUSE +#define MAGIC_KEY_DEBUG_MOUSE M +#endif + +#ifndef MAGIC_KEY_VERSION +#define MAGIC_KEY_VERSION V +#endif + +#ifndef MAGIC_KEY_STATUS +#define MAGIC_KEY_STATUS S +#endif + +#ifndef MAGIC_KEY_CONSOLE +#define MAGIC_KEY_CONSOLE C +#endif + +#ifndef MAGIC_KEY_LAYER0_ALT1 +#define MAGIC_KEY_LAYER0_ALT1 ESC +#endif + +#ifndef MAGIC_KEY_LAYER0_ALT2 +#define MAGIC_KEY_LAYER0_ALT2 GRAVE +#endif + +#ifndef MAGIC_KEY_LAYER0 +#define MAGIC_KEY_LAYER0 0 +#endif + +#ifndef MAGIC_KEY_LAYER1 +#define MAGIC_KEY_LAYER1 1 +#endif + +#ifndef MAGIC_KEY_LAYER2 +#define MAGIC_KEY_LAYER2 2 +#endif + +#ifndef MAGIC_KEY_LAYER3 +#define MAGIC_KEY_LAYER3 3 +#endif + +#ifndef MAGIC_KEY_LAYER4 +#define MAGIC_KEY_LAYER4 4 +#endif + +#ifndef MAGIC_KEY_LAYER5 +#define MAGIC_KEY_LAYER5 5 +#endif + +#ifndef MAGIC_KEY_LAYER6 +#define MAGIC_KEY_LAYER6 6 +#endif + +#ifndef MAGIC_KEY_LAYER7 +#define MAGIC_KEY_LAYER7 7 +#endif + +#ifndef MAGIC_KEY_LAYER8 +#define MAGIC_KEY_LAYER8 8 #endif + +#ifndef MAGIC_KEY_LAYER9 +#define MAGIC_KEY_LAYER9 9 +#endif + +#ifndef MAGIC_KEY_BOOTLOADER +#define MAGIC_KEY_BOOTLOADER PAUSE +#endif + +#ifndef MAGIC_KEY_LOCK +#define MAGIC_KEY_LOCK CAPS +#endif + +#ifndef MAGIC_KEY_EEPROM +#define MAGIC_KEY_EEPROM E +#endif + +#ifndef MAGIC_KEY_NKRO +#define MAGIC_KEY_NKRO N +#endif + +#ifndef MAGIC_KEY_SLEEP_LED +#define MAGIC_KEY_SLEEP_LED Z + +#endif + +#define XMAGIC_KC(key) KC_##key +#define MAGIC_KC(key) XMAGIC_KC(key) + +#endif
\ No newline at end of file diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index eb7b096bed..e668084858 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -70,6 +70,7 @@ void keyboard_setup(void) void keyboard_init(void) { + timer_init(); matrix_init(); #ifdef PS2_MOUSE_ENABLE @@ -90,6 +91,11 @@ void keyboard_init(void) #ifdef BACKLIGHT_ENABLE backlight_init(); #endif + +#ifdef FORCE_NKRO + keyboard_nkro = true; +#endif + } /* |