diff options
57 files changed, 17 insertions, 4656 deletions
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c deleted file mode 100644 index 2809c9d184..0000000000 --- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { -} diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h deleted file mode 100644 index b31d74307b..0000000000 --- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for a Generic STM32F103 board. - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F103 -#define BOARD_NAME "Generic STM32F103x board" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - */ -#define STM32F103xB - -/* - * IO pins assignments - */ - -/* on-board */ - -#define GPIOC_LED 13 -#define GPIOD_OSC_IN 0 -#define GPIOD_OSC_OUT 1 - -/* In case your board has a "USB enable" hardware - controlled by a pin, define it here. (It could be just - a 1.5k resistor connected to D+ line.) -*/ -/* -#define GPIOB_USB_DISC 10 -*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - * PA2 - Alternate output (USART2 TX). - * PA3 - Normal input (USART2 RX). - * PA9 - Alternate output (USART1 TX). - * PA10 - Normal input (USART1 RX). - */ -#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - * PB10 - Push Pull output (USB switch). - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - * PC13 - Push Pull output (LED). - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -/* The point is that most of the generic STM32F103* boards - have a 1.5k resistor connected on one end to the D+ line - and on the other end to some pin. Or even a slightly more - complicated "USB enable" circuit, controlled by a pin. - That should go here. - - However on some boards (e.g. one that I have), there's no - such hardware. In which case it's better to not do anything. -*/ -/* -#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); - -/* - * USB bus de-activation macro, required by the USB driver. - */ -/* -#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk deleted file mode 100644 index 6b8b312fd9..0000000000 --- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103 diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png b/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png Binary files differdeleted file mode 100644 index c44a7d9ebc..0000000000 --- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png +++ /dev/null diff --git a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.c deleted file mode 100644 index 7e9f90853e..0000000000 --- a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} -#endif -}; -#endif - -void enter_bootloader_mode_if_requested(void); - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - stm32_clock_init(); -} - - - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.h deleted file mode 100644 index 173f7b6054..0000000000 --- a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.h +++ /dev/null @@ -1,923 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/* - * Setup for ST STM32F072B-Discovery board. - */ - -/* - * Board identifier. - */ -#define BOARD_ST_STM32F072B_DISCOVERY -#define BOARD_NAME "ST STM32F072B-Discovery" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 0U -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 0U -#endif - -#define STM32_HSE_BYPASS - -/* - * MCU type as defined in the ST header. - */ -#define STM32F072xB - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_PIN4 4U -#define GPIOA_PIN5 5U -#define GPIOA_PIN6 6U -#define GPIOA_PIN7 7U -#define GPIOA_PIN8 8U -#define GPIOA_PIN9 9U -#define GPIOA_PIN10 10U -#define GPIOA_USB_DM 11U -#define GPIOA_USB_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_PIN3 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_PIN6 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_SPI2_SCK 13U -#define GPIOB_SPI2_MISO 14U -#define GPIOB_SPI2_MOSI 15U - -#define GPIOC_MEMS_CS 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_LED_RED 6U -#define GPIOC_LED_BLUE 7U -#define GPIOC_LED_ORANGE 8U -#define GPIOC_LED_GREEN 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_OSC_IN 0U -#define GPIOF_OSC_OUT 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_BUTTON PAL_LINE(GPIOA, 0U) -#define LINE_USB_DM PAL_LINE(GPIOA, 11U) -#define LINE_USB_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) - -#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U) -#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U) -#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U) - -#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U) -#define LINE_LED_RED PAL_LINE(GPIOC, 6U) -#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U) -#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U) -#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) - - - -#define LINE_OSC_IN PAL_LINE(GPIOF, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U) - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - BUTTON (input floating). - * PA1 - PIN1 (input pullup). - * PA2 - PIN2 (input pullup). - * PA3 - PIN3 (input pullup). - * PA4 - PIN4 (input pullup). - * PA5 - PIN5 (input pullup). - * PA6 - PIN6 (input pullup). - * PA7 - PIN7 (input pullup). - * PA8 - PIN8 (input pullup). - * PA9 - PIN9 (input pullup). - * PA10 - PIN10 (input pullup). - * PA11 - USB_DM (input floating). - * PA12 - USB_DP (input floating). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \ - PIN_MODE_INPUT(GPIOA_PIN1) | \ - PIN_MODE_INPUT(GPIOA_PIN2) | \ - PIN_MODE_INPUT(GPIOA_PIN3) | \ - PIN_MODE_INPUT(GPIOA_PIN4) | \ - PIN_MODE_INPUT(GPIOA_PIN5) | \ - PIN_MODE_INPUT(GPIOA_PIN6) | \ - PIN_MODE_INPUT(GPIOA_PIN7) | \ - PIN_MODE_INPUT(GPIOA_PIN8) | \ - PIN_MODE_INPUT(GPIOA_PIN9) | \ - PIN_MODE_INPUT(GPIOA_PIN10) | \ - PIN_MODE_INPUT(GPIOA_USB_DM) | \ - PIN_MODE_INPUT(GPIOA_USB_DP) | \ - PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ - PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ - PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ - PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ - PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ - PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ - PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ - PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \ - PIN_ODR_HIGH(GPIOA_PIN1) | \ - PIN_ODR_HIGH(GPIOA_PIN2) | \ - PIN_ODR_HIGH(GPIOA_PIN3) | \ - PIN_ODR_HIGH(GPIOA_PIN4) | \ - PIN_ODR_HIGH(GPIOA_PIN5) | \ - PIN_ODR_HIGH(GPIOA_PIN6) | \ - PIN_ODR_HIGH(GPIOA_PIN7) | \ - PIN_ODR_HIGH(GPIOA_PIN8) | \ - PIN_ODR_HIGH(GPIOA_PIN9) | \ - PIN_ODR_HIGH(GPIOA_PIN10) | \ - PIN_ODR_HIGH(GPIOA_USB_DM) | \ - PIN_ODR_HIGH(GPIOA_USB_DP) | \ - PIN_ODR_HIGH(GPIOA_SWDIO) | \ - PIN_ODR_HIGH(GPIOA_SWCLK) | \ - PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN7, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \ - PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ - PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - PIN3 (input pullup). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - PIN6 (input pullup). - * PB7 - PIN7 (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - SPI2_SCK (alternate 0). - * PB14 - SPI2_MISO (alternate 0). - * PB15 - SPI2_MOSI (alternate 0). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ - PIN_MODE_INPUT(GPIOB_PIN1) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_INPUT(GPIOB_PIN3) | \ - PIN_MODE_INPUT(GPIOB_PIN4) | \ - PIN_MODE_INPUT(GPIOB_PIN5) | \ - PIN_MODE_INPUT(GPIOB_PIN6) | \ - PIN_MODE_INPUT(GPIOB_PIN7) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ - PIN_OSPEED_HIGH(GPIOB_PIN2) | \ - PIN_OSPEED_HIGH(GPIOB_PIN3) | \ - PIN_OSPEED_HIGH(GPIOB_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ - PIN_ODR_HIGH(GPIOB_PIN1) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_HIGH(GPIOB_PIN3) | \ - PIN_ODR_HIGH(GPIOB_PIN4) | \ - PIN_ODR_HIGH(GPIOB_PIN5) | \ - PIN_ODR_HIGH(GPIOB_PIN6) | \ - PIN_ODR_HIGH(GPIOB_PIN7) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U)) - -/* - * GPIOC setup: - * - * PC0 - MEMS_CS (output pushpull maximum). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - LED_RED (output pushpull maximum). - * PC7 - LED_BLUE (output pushpull maximum). - * PC8 - LED_ORANGE (output pushpull maximum). - * PC9 - LED_GREEN (output pushpull maximum). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_OUTPUT(GPIOC_LED_RED) | \ - PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_OSC32_IN) | \ - PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ - PIN_OSPEED_HIGH(GPIOC_LED_RED) | \ - PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_LOW(GPIOC_LED_RED) | \ - PIN_ODR_LOW(GPIOC_LED_BLUE) | \ - PIN_ODR_LOW(GPIOC_LED_ORANGE) | \ - PIN_ODR_LOW(GPIOC_LED_GREEN) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_OSC32_IN) | \ - PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_BLUE, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ - PIN_MODE_INPUT(GPIOE_PIN1) | \ - PIN_MODE_INPUT(GPIOE_PIN2) | \ - PIN_MODE_INPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) | \ - PIN_MODE_INPUT(GPIOE_PIN5) | \ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_INPUT(GPIOE_PIN7) | \ - PIN_MODE_INPUT(GPIOE_PIN8) | \ - PIN_MODE_INPUT(GPIOE_PIN9) | \ - PIN_MODE_INPUT(GPIOE_PIN10) | \ - PIN_MODE_INPUT(GPIOE_PIN11) | \ - PIN_MODE_INPUT(GPIOE_PIN12) | \ - PIN_MODE_INPUT(GPIOE_PIN13) | \ - PIN_MODE_INPUT(GPIOE_PIN14) | \ - PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ - PIN_ODR_HIGH(GPIOE_PIN1) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_PIN7) | \ - PIN_ODR_HIGH(GPIOE_PIN8) | \ - PIN_ODR_HIGH(GPIOE_PIN9) | \ - PIN_ODR_HIGH(GPIOE_PIN10) | \ - PIN_ODR_HIGH(GPIOE_PIN11) | \ - PIN_ODR_HIGH(GPIOE_PIN12) | \ - PIN_ODR_HIGH(GPIOE_PIN13) | \ - PIN_ODR_HIGH(GPIOE_PIN14) | \ - PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - OSC_IN (input floating). - * PF1 - OSC_OUT (input floating). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \ - PIN_MODE_INPUT(GPIOF_OSC_OUT) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \ - PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \ - PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \ - PIN_ODR_HIGH(GPIOF_OSC_OUT) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \ - PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0U)) - - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.mk b/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.mk deleted file mode 100644 index b98dcdd26c..0000000000 --- a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY diff --git a/keyboards/chibios_test/boards/maple_mini_mapping.png b/keyboards/chibios_test/boards/maple_mini_mapping.png Binary files differdeleted file mode 100644 index 12cfa81db2..0000000000 --- a/keyboards/chibios_test/boards/maple_mini_mapping.png +++ /dev/null diff --git a/keyboards/chibios_test/chibios_test.c b/keyboards/chibios_test/chibios_test.c deleted file mode 100644 index efe2d4a5d6..0000000000 --- a/keyboards/chibios_test/chibios_test.c +++ /dev/null @@ -1 +0,0 @@ -#include "chibios_test.h" diff --git a/keyboards/chibios_test/chibios_test.h b/keyboards/chibios_test/chibios_test.h deleted file mode 100644 index 9fc996ff75..0000000000 --- a/keyboards/chibios_test/chibios_test.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ -#define KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ - -#include "quantum.h" - -#define LAYOUT(k00) {{ k00 }} - -#endif /* KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ */ diff --git a/keyboards/chibios_test/config.h b/keyboards/chibios_test/config.h deleted file mode 100644 index 91350c4457..0000000000 --- a/keyboards/chibios_test/config.h +++ /dev/null @@ -1,65 +0,0 @@ -/* -Copyright 2015 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6464 -#define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER QMK -#define PRODUCT ChibiOS QMK test -#define DESCRIPTION QMK keyboard firmware test for ChibiOS - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/chibios_test/keymaps/default/keymap.c b/keyboards/chibios_test/keymaps/default/keymap.c deleted file mode 100644 index 0edc697bf9..0000000000 --- a/keyboards/chibios_test/keymaps/default/keymap.c +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include QMK_KEYBOARD_H - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - {{KC_CAPS}}, // test with KC_CAPS, KC_A, RESET -}; diff --git a/keyboards/chibios_test/ld/MKL26Z64.ld b/keyboards/chibios_test/ld/MKL26Z64.ld deleted file mode 100644 index c4ca8b874c..0000000000 --- a/keyboards/chibios_test/ld/MKL26Z64.ld +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast <s3+flabbergast@sdfeu.org> - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * KL26Z64 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 62k - 0x410 - flash3 : org = 0x0000F800, len = 2k - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFF800, len = 8k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -__eeprom_workarea_start__ = ORIGIN(flash3); -__eeprom_workarea_size__ = LENGTH(flash3); -__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld deleted file mode 100644 index f9bfe9c005..0000000000 --- a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld +++ /dev/null @@ -1,88 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * ST32F103xB memory setup for use with the maplemini bootloader. - * You will have to - * #define CORTEX_VTOR_INIT 0x5000 - * in your projects chconf.h - */ -MEMORY -{ - flash0 : org = 0x08002000, len = 128k - 0x2000 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 20k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/chibios_test/readme.md b/keyboards/chibios_test/readme.md deleted file mode 100644 index 096ecd6aea..0000000000 --- a/keyboards/chibios_test/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# ChibiOS Test Keyboards - -Test code for several ARM based ChibiOS boards
\ No newline at end of file diff --git a/keyboards/chibios_test/rules.mk b/keyboards/chibios_test/rules.mk deleted file mode 100644 index 45f03be020..0000000000 --- a/keyboards/chibios_test/rules.mk +++ /dev/null @@ -1,10 +0,0 @@ -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -CUSTOM_MATRIX = yes # Custom matrix file - -DEFAULT_FOLDER = chibios_test/stm32_f072_onekey
\ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f072_onekey/bootloader_defs.h b/keyboards/chibios_test/stm32_f072_onekey/bootloader_defs.h deleted file mode 100644 index 02c48c4e6d..0000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/chibios_test/stm32_f072_onekey/config.h b/keyboards/chibios_test/stm32_f072_onekey/config.h deleted file mode 100644 index bbaf0dc4bf..0000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/config.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ -#define KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ - -#include "../config.h" - - -#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ */ diff --git a/keyboards/chibios_test/stm32_f072_onekey/led.c b/keyboards/chibios_test/stm32_f072_onekey/led.c deleted file mode 100644 index 18edb8ba89..0000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/led.c +++ /dev/null @@ -1,34 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "hal.h" - -#include "led.h" - - -void led_set(uint8_t usb_led) -{ - (void)usb_led; - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output high - palSetPadMode(GPIOC, GPIOC_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(GPIOC, GPIOC_LED_GREEN); - } else { - // Hi-Z - palSetPadMode(GPIOC, GPIOC_LED_GREEN, PAL_MODE_INPUT); - } -} diff --git a/keyboards/chibios_test/stm32_f072_onekey/matrix.c b/keyboards/chibios_test/stm32_f072_onekey/matrix.c deleted file mode 100644 index a05b38cd4c..0000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/matrix.c +++ /dev/null @@ -1,163 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * scan matrix - */ -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "wait.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -#define LED_ON() do { palSetPad(GPIOC, GPIOC_LED_BLUE) ;} while (0) -#define LED_OFF() do { palClearPad(GPIOC, GPIOC_LED_BLUE); } while (0) -#define LED_TGL() do { palTogglePad(GPIOC, GPIOC_LED_BLUE); } while (0) - -void matrix_init(void) -{ - // initialize row and col - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - //debug - debug_matrix = true; - LED_ON(); - wait_ms(500); - LED_OFF(); -} - -uint8_t matrix_scan(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - wait_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - wait_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -/* Column pin configuration - */ -static void init_cols(void) -{ - // don't need pullup/down, since it's pulled down in hardware - palSetPadMode(GPIOA, GPIOA_BUTTON, PAL_MODE_INPUT); -} - -/* Returns status of switches(1:on, 0:off) */ -static matrix_row_t read_cols(void) -{ - return ((palReadPad(GPIOA, GPIOA_BUTTON)==PAL_LOW) ? 0 : (1<<0)); - // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1)) -} - -/* Row pin configuration - */ -static void unselect_rows(void) -{ - // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_INPUT); // hi-Z -} - -static void select_row(uint8_t row) -{ - (void)row; - // Output low to select - // switch (row) { - // case 0: - // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_OUTPUT_PUSHPULL); - // palSetPad(GPIOA, GPIOA_PIN10, PAL_LOW); - // break; - // } -} diff --git a/keyboards/chibios_test/stm32_f072_onekey/readme.md b/keyboards/chibios_test/stm32_f072_onekey/readme.md deleted file mode 100644 index c5e504e49c..0000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# ChibiOS Test - -Test code for the stm32_f072 one key keyboard
\ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.c b/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.c deleted file mode 100644 index 820d062ffd..0000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.c +++ /dev/null @@ -1 +0,0 @@ -#include "stm32_f072_onekey.h" diff --git a/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h b/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h deleted file mode 100644 index 345bf3bede..0000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef STM32_F072_ONEKEY_H -#define STM32_F072_ONEKEY_H -#include "chibios_test.h" - -#define LAYOUT(k00) {{ k00 }} - -#endif diff --git a/keyboards/chibios_test/stm32_f103_onekey/bootloader_defs.h b/keyboards/chibios_test/stm32_f103_onekey/bootloader_defs.h deleted file mode 100644 index 0f45203cb6..0000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/chibios_test/stm32_f103_onekey/chconf.h b/keyboards/chibios_test/stm32_f103_onekey/chconf.h deleted file mode 100644 index dfb1f9dfb9..0000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 2000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/chibios_test/stm32_f103_onekey/config.h b/keyboards/chibios_test/stm32_f103_onekey/config.h deleted file mode 100644 index de0b906f35..0000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ -#define KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ - -#include "../config.h" - -#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ */ diff --git a/keyboards/chibios_test/stm32_f103_onekey/flash.sh b/keyboards/chibios_test/stm32_f103_onekey/flash.sh deleted file mode 100755 index 15501dfa57..0000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/flash.sh +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/bash -Arduino_STM32_usb_hid/tools/linux/maple_upload ttyACM0 2 1EAF:0003 build/ch.bin diff --git a/keyboards/chibios_test/stm32_f103_onekey/halconf.h b/keyboards/chibios_test/stm32_f103_onekey/halconf.h deleted file mode 100644 index 8b9724b1a3..0000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/chibios_test/stm32_f103_onekey/led.c b/keyboards/chibios_test/stm32_f103_onekey/led.c deleted file mode 100644 index f5c55f7d9b..0000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/led.c +++ /dev/null @@ -1,43 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "hal.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - /* generic STM32F103C8T6 board */ -#ifdef BOARD_GENERIC_STM32_F103 - palClearPad(GPIOC, 13); -#endif - /* Maple Mini */ -#ifdef BOARD_MAPLEMINI_STM32_F103 - palSetPad(GPIOB, 1); -#endif - } else { - /* generic STM32F103C8T6 board */ -#ifdef BOARD_GENERIC_STM32_F103 - palSetPad(GPIOC, 13); -#endif - /* Maple Mini */ -#ifdef BOARD_MAPLEMINI_STM32_F103 - palClearPad(GPIOB,1); -#endif - } -} diff --git a/keyboards/chibios_test/stm32_f103_onekey/matrix.c b/keyboards/chibios_test/stm32_f103_onekey/matrix.c deleted file mode 100644 index ea9d8d057b..0000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/matrix.c +++ /dev/null @@ -1,177 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * scan matrix - */ -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "wait.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -/* generic STM32F103C8T6 board */ -#ifdef BOARD_GENERIC_STM32_F103 -#define LED_ON() do { palClearPad(GPIOC, GPIOC_LED) ;} while (0) -#define LED_OFF() do { palSetPad(GPIOC, GPIOC_LED); } while (0) -#define LED_TGL() do { palTogglePad(GPIOC, GPIOC_LED); } while (0) -#endif - -/* Maple Mini */ -#ifdef BOARD_MAPLEMINI_STM32_F103 -#define LED_ON() do { palSetPad(GPIOB, 1) ;} while (0) -#define LED_OFF() do { palClearPad(GPIOB, 1); } while (0) -#define LED_TGL() do { palTogglePad(GPIOB, 1); } while (0) -#endif - -void matrix_init(void) -{ - // initialize row and col - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - //debug - debug_matrix = true; - LED_ON(); - wait_ms(500); - LED_OFF(); -} - -uint8_t matrix_scan(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - wait_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - wait_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -/* Column pin configuration - */ -static void init_cols(void) -{ -#ifdef BOARD_MAPLEMINI_STM32_F103 - // don't need pullup/down, since it's pulled down in hardware - palSetPadMode(GPIOB, 8, PAL_MODE_INPUT); -#else - palSetPadMode(GPIOB, 8, PAL_MODE_INPUT_PULLDOWN); -#endif -} - -/* Returns status of switches(1:on, 0:off) */ -static matrix_row_t read_cols(void) -{ - return ((palReadPad(GPIOB, 8)==PAL_LOW) ? 0 : (1<<0)); - // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1)) -} - -/* Row pin configuration - */ -static void unselect_rows(void) -{ - // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_INPUT); // hi-Z -} - -static void select_row(uint8_t row) -{ - (void)row; - // Output low to select - // switch (row) { - // case 0: - // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_OUTPUT_PUSHPULL); - // palSetPad(GPIOA, GPIOA_PIN10, PAL_LOW); - // break; - // } -} diff --git a/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h deleted file mode 100644 index 276829216e..0000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/chibios_test/stm32_f103_onekey/readme.md b/keyboards/chibios_test/stm32_f103_onekey/readme.md deleted file mode 100644 index d375ef7d84..0000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# ChibiOS Test - -Test code for the stm32_f103 one key keyboard
\ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f103_onekey/rules.mk b/keyboards/chibios_test/stm32_f103_onekey/rules.mk deleted file mode 100644 index c75738338a..0000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/rules.mk +++ /dev/null @@ -1,47 +0,0 @@ -# project specific files -SRC = matrix.c \ - led.c - -# GENERIC STM32F103C8T6 board - stm32duino bootloader -OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = GENERIC_STM32_F103 - -# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD) -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -# MAPLE MINI -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000 -# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader -# BOARD = MAPLEMINI_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -# startup code to use -# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
\ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.c b/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.c deleted file mode 100644 index 7fa99bb28d..0000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.c +++ /dev/null @@ -1 +0,0 @@ -#include "stm32_f103_onekey.h" diff --git a/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h b/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h deleted file mode 100644 index b9ba65a9e9..0000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef STM32_F103_ONEKEY_H -#define STM32_F103_ONEKEY_H -#include "chibios_test.h" - -#define LAYOUT(k00) {{ k00 }} - -#endif diff --git a/keyboards/chibios_test/teensy_lc_onekey/chconf.h b/keyboards/chibios_test/teensy_lc_onekey/chconf.h deleted file mode 100644 index 3294ac7eee..0000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/chibios_test/teensy_lc_onekey/config.h b/keyboards/chibios_test/teensy_lc_onekey/config.h deleted file mode 100644 index d9eb05d2ac..0000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ -#define KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ - -#include "../config.h" - -#endif /* KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ */ diff --git a/keyboards/chibios_test/teensy_lc_onekey/halconf.h b/keyboards/chibios_test/teensy_lc_onekey/halconf.h deleted file mode 100644 index 1b6f2adc20..0000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/halconf.h +++ /dev/null @@ -1,354 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ - diff --git a/keyboards/chibios_test/teensy_lc_onekey/instructions.md b/keyboards/chibios_test/teensy_lc_onekey/instructions.md deleted file mode 100644 index 66f73bf14b..0000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/instructions.md +++ /dev/null @@ -1,97 +0,0 @@ -# Teensy LC, 3.0, 3.1, 3.2 support - -These ARM Teensies are now supported through [ChibiOS](http://chibios.org). - -## Installing the ARM toolchain - -You'll need to install an ARM toolchain, there is now a nice documentation about the two AVR/ARM toolchain : https://docs.qmk.fm/getting_started_build_tools.html and you can just run `sudo util/install_dependencies.sh`. -This toolchain is used instead of `avr-gcc`, which is only for AVR chips. Naturally you'll also need the usual development tools (e.g. `make`), just as in the AVR setting. - -You can find others way with the [gcc ARM embedded](https://launchpad.net/gcc-arm-embedded) website, or using your favourite package manager. After installing, you should be able to run `arm-none-eabi-gcc -v` in the command prompt and get sensible output. - -## Installing ChibiOS - -Next, you'll need ChibiOS. For Teensies, you'll need code from two repositories: [chibios-main](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS). - -### If you’re using git - -Run `git submodule sync --recursive && git submodule update --init --recursive`. This will install ChibiOS and ChibiOS-Contrib in the `/lib/` directory. - -### If you’re not using Git - -If you're not using git, you can just download a [zip of chibios from here](https://github.com/ChibiOS/ChibiOS/archive/a7df9a891067621e8e1a5c2a2c0ceada82403afe.zip), unpack the zip, and rename/move the unpacked directory (named `ChibiOS-<long_hash_here>`) to `lib/chibios/chibios` (so that the file `lib/chibios/chibios/license.txt` exists). Now the same procedure with a [zip of chibios-contrib from here](https://github.com/ChibiOS/ChibiOS-Contrib/archive/e1311c4db6cd366cf760673f769e925741ac0ad3.zip): unpack and move `ChibiOS-Contrib-<long_hash_here>` to `lib/chibios/chibios-contrib`. - -(If you're using git, you can just clone the two repos: [chibios](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS-Contrib). However - be warned that things may be somewhat out-of-sync (updates at different rates), so you may need to hunt a bit for the right commits.) - -(Why do we need chibios-contrib? Well, the main repo focuses on STM32 chips, and Freescale/NXP Kinetis chips are supported via the Contrib repository.) - -This should be it. Running `make` in `keyboard/teensy_lc_onekey` should create a working firmware in `build/`, called `ch.hex`. - -For more notes about the ChibiOS backend in TMK, see `tmk_core/protocol/chibios/README.md`. - -## About this onekey example - -It's set up for Teensy LC. To use 3.x, you'll need to edit the `Makefile` (and comment out one line in `mcuconf.h`). A sample makefile for Teensy 3.0 is provided as `Makefile.3.0`, can be used without renaming with `make -f Makefile.3.0`. Similarly for Teensy 3.2, there's `Makefile.3.2`. - -## Credits - -TMK itself is written by hasu, original sources [here](https://github.com/tmk/tmk_keyboard). - -The USB support for Kinetis MCUs is due to RedoX. His ChibiOS fork is also [on github](https://github.com/RedoXyde/ChibiOS); but it doesn't include Teensy LC definitions. - -## Features that are not implemented yet - -Currently only the more fancy suspend features are not there (power saving during suspend). The rest should work fine (reports either way are welcome). - -# Matrix programming notes - -The notes below explain what commands can be used to examine and set the status of Teensy pins. - -## ChibiOS pin manipulation basics - -### Pins - -Each pin sits on a "port", each of which comprises at most 32 individual pins. -So for instance "PTC5" from Kinetis manual/datasheet refers to port C (or GPIOA), pin 5. Most functions dealing with pins take 2 parameters which specify the pin -- the first being the port, the second being the pin number. - -Within ChibiOS, there are definitions which simplify this a bit for the Teensies. `TEENSY_PINn_IOPORT` represents the port of the MCU's pin connected Teensy's PIN `n`, and `TEENSY_PINn` represents its MCU's pin number. - -### Mode - -A MCU pin can be in several modes. The basic command to set a pin mode is - - palSetPadMode(TEENSY_PINn_IOPORT, TEENSY_PINn, PAL_MODE_INPUT_PULLUP); - -The last parameter is the mode. For keyboards, the usual ones that are used are `PAL_MODE_INPUT_PULLUP` (input with a pullup), `PAL_MODE_INPUT_PULLDOWN` (input with a pulldown), `PAL_MODE_INPUT` (input floating, a.k.a. Hi-Z), `PAL_MODE_OUTPUT_PUSHPULL` (output in the Arduino sense -- can be then set HIGH or LOW). - -### Setting - -Pins are set HIGH (after they've been put into `OUTPUT_PUSHPULL` mode) by - - palSetPad(TEENSY_PINn_IOPORT, TEENSY_PINn); - -or set LOW by - - palClearPad(TEENSY_PINn_IOPORT, TEENSY_PINn); - -Toggling can be done with - - palTogglePad(TEENSY_PINn_IOPORT, TEENSY_PINn); - -Alternatively, you can use - - palWritePad(TEENSY_PINn_IOPORT, TEENSY_PINn, bit); - -where `bit` is either `PAL_LOW` or `PAL_HIGH` (i.e. `0` or `1`). - -### Reading - -Reading pin status is done with - - palReadPad(TEENSY_PINn_IOPORT, TEENSY_PINn); - -The function returns either `PAL_HIGH` (actually `1`) or `PAL_LOW` (actually `0`). - -### Further docs - -All the commands that are available for pin manipulation through ChibiOS HAL are documented in [ChibiOS PAL driver docs](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html). diff --git a/keyboards/chibios_test/teensy_lc_onekey/led.c b/keyboards/chibios_test/teensy_lc_onekey/led.c deleted file mode 100644 index dfa60c1076..0000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/led.c +++ /dev/null @@ -1,32 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "hal.h" - -#include "led.h" - - -void led_set(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output high - palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); - } else { - // Hi-Z - palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_INPUT); - } -} diff --git a/keyboards/chibios_test/teensy_lc_onekey/matrix.c b/keyboards/chibios_test/teensy_lc_onekey/matrix.c deleted file mode 100644 index 7dab04f02b..0000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/matrix.c +++ /dev/null @@ -1,163 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * scan matrix - */ -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "wait.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -#define LED_ON() do { palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13) ;} while (0) -#define LED_OFF() do { palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0) -#define LED_TGL() do { palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0) - -void matrix_init(void) -{ - // initialize row and col - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - //debug - debug_matrix = true; - LED_ON(); - wait_ms(500); - LED_OFF(); -} - -uint8_t matrix_scan(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - wait_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - wait_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -/* Column pin configuration - */ -static void init_cols(void) -{ - // internal pull-up - palSetPadMode(TEENSY_PIN2_IOPORT, TEENSY_PIN2, PAL_MODE_INPUT_PULLUP); -} - -/* Returns status of switches(1:on, 0:off) */ -static matrix_row_t read_cols(void) -{ - return ((palReadPad(TEENSY_PIN2_IOPORT, TEENSY_PIN2)==PAL_HIGH) ? 0 : (1<<0)); - // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1)) -} - -/* Row pin configuration - */ -static void unselect_rows(void) -{ - palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_INPUT); // hi-Z -} - -static void select_row(uint8_t row) -{ - (void)row; - // Output low to select - switch (row) { - case 0: - palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_OUTPUT_PUSHPULL); - palClearPad(TEENSY_PIN5_IOPORT, TEENSY_PIN5); - break; - } -} diff --git a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h deleted file mode 100644 index 2764e88989..0000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 1 -/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -#if 0 -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* Need to redefine this, since the default is for K20x */ -/* This is for Teensy LC; you should comment it out (or change to 5) - * for Teensy 3.x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/chibios_test/teensy_lc_onekey/readme.md b/keyboards/chibios_test/teensy_lc_onekey/readme.md deleted file mode 100644 index 4f99113870..0000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# ChibiOS Test - -Test code for the teensy lc one key keyboard
\ No newline at end of file diff --git a/keyboards/chibios_test/teensy_lc_onekey/rules.mk b/keyboards/chibios_test/teensy_lc_onekey/rules.mk deleted file mode 100644 index 4deee1f579..0000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/rules.mk +++ /dev/null @@ -1,45 +0,0 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -MCU_FAMILY = KINETIS -MCU_SERIES = KL2x - -# Linker script to use -# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -MCU_LDSCRIPT = MKL26Z64 - -# Startup code to use -# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 -# - k20x7 for Teensy 3.1 and 3.2 -MCU_STARTUP = kl2x - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -BOARD = PJRC_TEENSY_LC - -# Cortex version -# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 -MCU = cortex-m0plus - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 6
\ No newline at end of file diff --git a/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c deleted file mode 100644 index b6c4327932..0000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c +++ /dev/null @@ -1 +0,0 @@ -#include "teensy_lc_onekey.h" diff --git a/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h deleted file mode 100644 index e94c13b663..0000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef TEENSY_LC_ONEKEY_H -#define TEENSY_LC_ONEKEY_H -#include "chibios_test.h" - -#define LAYOUT(k00) {{ k00 }} - -#endif diff --git a/keyboards/chibios_test/stm32_f072_onekey/chconf.h b/keyboards/handwired/onekey/stm32f0_disco/chconf.h index 99fa8ce398..99fa8ce398 100644 --- a/keyboards/chibios_test/stm32_f072_onekey/chconf.h +++ b/keyboards/handwired/onekey/stm32f0_disco/chconf.h diff --git a/keyboards/proton_c/proton_c.h b/keyboards/handwired/onekey/stm32f0_disco/config.h index 159f9975a3..039a1beffd 100644 --- a/keyboards/proton_c/proton_c.h +++ b/keyboards/handwired/onekey/stm32f0_disco/config.h @@ -1,4 +1,4 @@ -/* Copyright 2018 Jack Humbert +/* Copyright 2019 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,4 +15,9 @@ */ #pragma once -#include "quantum.h" + +#include "config_common.h" + +#define MATRIX_COL_PINS { B4 } +#define MATRIX_ROW_PINS { B5 } +#define UNUSED_PINS diff --git a/keyboards/chibios_test/stm32_f072_onekey/halconf.h b/keyboards/handwired/onekey/stm32f0_disco/halconf.h index 8b9724b1a3..53b2f91e33 100644 --- a/keyboards/chibios_test/stm32_f072_onekey/halconf.h +++ b/keyboards/handwired/onekey/stm32f0_disco/halconf.h @@ -111,7 +111,7 @@ * @brief Enables the PWM subsystem. */ #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE +#define HAL_USE_PWM TRUE #endif /** diff --git a/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h b/keyboards/handwired/onekey/stm32f0_disco/mcuconf.h index faca3defdf..20c48b611a 100644 --- a/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h +++ b/keyboards/handwired/onekey/stm32f0_disco/mcuconf.h @@ -120,7 +120,7 @@ #define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM3 TRUE #define STM32_PWM_TIM1_IRQ_PRIORITY 3 #define STM32_PWM_TIM2_IRQ_PRIORITY 3 #define STM32_PWM_TIM3_IRQ_PRIORITY 3 diff --git a/keyboards/handwired/onekey/stm32f0_disco/readme.md b/keyboards/handwired/onekey/stm32f0_disco/readme.md new file mode 100644 index 0000000000..48d999d69c --- /dev/null +++ b/keyboards/handwired/onekey/stm32f0_disco/readme.md @@ -0,0 +1,5 @@ +# STM32F072 Discovery kit onekey + +Supported Hardware: <https://www.st.com/en/evaluation-tools/32f072bdiscovery.html> + +To trigger keypress, short together pins *B4* and *B5*. diff --git a/keyboards/chibios_test/stm32_f072_onekey/rules.mk b/keyboards/handwired/onekey/stm32f0_disco/rules.mk index 91c17c0244..69639f940e 100644 --- a/keyboards/chibios_test/stm32_f072_onekey/rules.mk +++ b/keyboards/handwired/onekey/stm32f0_disco/rules.mk @@ -1,7 +1,3 @@ -# project specific files -SRC = matrix.c \ - led.c - ## chip/board settings # the next two should match the directories in # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) @@ -33,6 +29,6 @@ ARMV = 6 # <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch #STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 -# Build Options -# comment out to disable the options. -#
\ No newline at end of file +# Options to pass to dfu-util when flashing +DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +DFU_SUFFIX_ARGS = -p df11 -v 0483 diff --git a/keyboards/proton_c/config.h b/keyboards/proton_c/config.h deleted file mode 100644 index 5ebd17f99e..0000000000 --- a/keyboards/proton_c/config.h +++ /dev/null @@ -1,114 +0,0 @@ -/* Copyright 2018 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0006 -#define MANUFACTURER QMK -#define PRODUCT Proton C -#define DESCRIPTION A compact ortholinear keyboard - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -#define MATRIX_ROW_PINS { B9 } -#define MATRIX_COL_PINS { B0 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 6 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -// #define WS2812_LED_N 2 -// #define RGBLED_NUM WS2812_LED_N -// #define WS2812_TIM_N 2 -// #define WS2812_TIM_CH 2 -// #define PORT_WS2812 GPIOA -// #define PIN_WS2812 1 -// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection) -//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP -//#define WS2812_EXTERNAL_PULLUP diff --git a/keyboards/proton_c/keymaps/default/keymap.c b/keyboards/proton_c/keymaps/default/keymap.c deleted file mode 100644 index a3103432fa..0000000000 --- a/keyboards/proton_c/keymaps/default/keymap.c +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2018 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = {{ KC_A }} -}; diff --git a/keyboards/proton_c/proton_c.c b/keyboards/proton_c/proton_c.c deleted file mode 100644 index 5256343478..0000000000 --- a/keyboards/proton_c/proton_c.c +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2018 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "proton_c.h" - -void matrix_init_kb(void) { - // Turn status LED on - setPinOutput(C13); - writePinHigh(C13); - - matrix_init_user(); -} diff --git a/keyboards/proton_c/readme.md b/keyboards/proton_c/readme.md deleted file mode 100644 index 5f27795aec..0000000000 --- a/keyboards/proton_c/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -Proton C -=== - - - -A Pro Micro drop-in replacement. - -Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert) -Hardware Supported: QMK Proton C -Hardware Availability: [List of vendors](https://qmk.fm/proton-c) - -Make example for this keyboard (after setting up your build environment): - - make proton_c:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/proton_c/rules.mk b/keyboards/proton_c/rules.mk deleted file mode 100644 index 4edc75929e..0000000000 --- a/keyboards/proton_c/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -MCU = STM32F303 - -# Build Options -# comment out to disable the options. -# -BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = yes -RGBLIGHT_ENABLE = no -# SERIAL_LINK_ENABLE = yes |
