diff options
| -rw-r--r-- | FAQ.md | 6 |
1 files changed, 3 insertions, 3 deletions
@@ -118,7 +118,7 @@ Properly configure bootloader size in **Makefile**. With wrong section size boot # Arduino Caterina(ATmega32U4) 4096
# USBaspLoader(ATmega***) 2048
# Teensy halfKay(ATmega32U4) 512
-# Teensy++ halfKay(AT90USB128) 1024
+# Teensy++ halfKay(AT90USB128) 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
```
AVR Boot section size are defined by setting **BOOTSZ** fuse in fact. Consult with your MCU datasheet.
@@ -134,7 +134,7 @@ byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286) | | | |
= = = =
| | 32KB-4KB | | 128KB-8KB
-0x6000 +---------------+ 0x1FC00 +---------------+
+0x6000 +---------------+ 0x1E000 +---------------+
| Bootloader | 4KB | Bootloader | 8KB
0x7FFF +---------------+ 0x1FFFF +---------------+
@@ -148,7 +148,7 @@ byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286) = = = =
| | 32KB-512B | | 128KB-1KB
0x7E00 +---------------+ 0x1FC00 +---------------+
- | Bootloader | 512B | Bootloader | 1KB
+ | Bootloader | 512B | Bootloader | 2KB
0x7FFF +---------------+ 0x1FFFF +---------------+
```
|