diff options
70 files changed, 182 insertions, 806 deletions
diff --git a/builddefs/build_keyboard.mk b/builddefs/build_keyboard.mk index dc86b232df..a258f33216 100644 --- a/builddefs/build_keyboard.mk +++ b/builddefs/build_keyboard.mk @@ -390,10 +390,12 @@ ifneq ("$(KEYMAP_H)","") CONFIG_H += $(KEYMAP_H) endif +OPT_DEFS += -DKEYMAP_C=\"$(KEYMAP_C)\" + # project specific files SRC += \ $(KEYBOARD_SRC) \ - $(KEYMAP_C) \ + $(QUANTUM_DIR)/keymap_introspection.c \ $(QUANTUM_SRC) \ $(QUANTUM_DIR)/main.c \ diff --git a/builddefs/common_features.mk b/builddefs/common_features.mk index c976b8296d..631558ef27 100644 --- a/builddefs/common_features.mk +++ b/builddefs/common_features.mk @@ -542,12 +542,6 @@ ifeq ($(strip $(LED_TABLES)), yes) SRC += $(QUANTUM_DIR)/led_tables.c endif -ifeq ($(strip $(TERMINAL_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/process_keycode/process_terminal.c - OPT_DEFS += -DTERMINAL_ENABLE - OPT_DEFS += -DUSER_PRINT -endif - ifeq ($(strip $(VIA_ENABLE)), yes) DYNAMIC_KEYMAP_ENABLE := yes RAW_ENABLE := yes diff --git a/builddefs/common_rules.mk b/builddefs/common_rules.mk index d3acddc87b..6573257c78 100644 --- a/builddefs/common_rules.mk +++ b/builddefs/common_rules.mk @@ -1,19 +1,5 @@ # Hey Emacs, this is a -*- makefile -*- #---------------------------------------------------------------------------- -# WinAVR Makefile Template written by Eric B. Weddington, Jg Wunsch, et al. -# -# Released to the Public Domain -# -# Additional material for this makefile was written by: -# Peter Fleury -# Tim Henigan -# Colin O'Flynn -# Reiner Patommel -# Markus Pfaff -# Sander Pool -# Frederik Rouleau -# Carlos Lamas -# # Enable vpath seraching for source files only # Without this, output files, could be read from the wrong .build directories @@ -38,36 +24,15 @@ NO_LTO_OBJ := $(filter %.a,$(OBJ)) MASTER_OUTPUT := $(firstword $(OUTPUTS)) - - # Output format. (can be srec, ihex, binary) FORMAT = ihex # Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT ?= s -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=gnu99 - - -# Place -D or -U options here for C sources -#CDEFS += - - -# Place -D or -U options here for ASM sources -#ADEFS += - - -# Place -D or -U options here for C++ sources -#CXXDEFS += -D__STDC_LIMIT_MACROS -#CXXDEFS += -D__STDC_CONSTANT_MACROS -#CXXDEFS += +# Compiler flag to set the C and C++ language standard level +CSTANDARD = -std=gnu11 +CXXSTANDARD = -std=gnu++14 # Speed up recompilations by opt-in usage of ccache USE_CCACHE ?= no @@ -75,12 +40,8 @@ ifneq ($(USE_CCACHE),no) CC_PREFIX ?= ccache endif -#---------------- Compiler Options C ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. +#---------------- C Compiler Options ---------------- + ifeq ($(strip $(LTO_ENABLE)), yes) ifeq ($(PLATFORM),ARM_ATSAM) $(info Enabling LTO on arm_atsam-targeting boards is known to have a high likelihood of failure.) @@ -111,23 +72,14 @@ CFLAGS += -Wstrict-prototypes ifneq ($(strip $(ALLOW_WARNINGS)), yes) CFLAGS += -Werror endif -#CFLAGS += -mshort-calls -#CFLAGS += -fno-unit-at-a-time -#CFLAGS += -Wundef -#CFLAGS += -Wunreachable-code -#CFLAGS += -Wsign-compare CFLAGS += $(CSTANDARD) # This fixes lots of keyboards linking errors but SHOULDN'T BE A FINAL SOLUTION # Fixing of multiple variable definitions must be made. CFLAGS += -fcommon -#---------------- Compiler Options C++ ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. +#---------------- C++ Compiler Options ---------------- + ifeq ($(strip $(DEBUG_ENABLE)),yes) CXXFLAGS += -g$(DEBUG) endif @@ -141,57 +93,17 @@ CXXFLAGS += -Wundef ifneq ($(strip $(ALLOW_WARNINGS)), yes) CXXFLAGS += -Werror endif -#CXXFLAGS += -mshort-calls -#CXXFLAGS += -fno-unit-at-a-time -#CXXFLAGS += -Wstrict-prototypes -#CXXFLAGS += -Wunreachable-code -#CXXFLAGS += -Wsign-compare -#CXXFLAGS += $(CSTANDARD) #---------------- Assembler Options ---------------- + ASFLAGS += $(ADEFS) ifeq ($(VERBOSE_AS_CMD),yes) ASFLAGS += -v endif -#---------------- Library Options ---------------- -# Minimalistic printf version -PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min - -# Floating point printf version (requires MATH_LIB = -lm below) -PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt - -# If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = -#PRINTF_LIB = $(PRINTF_LIB_MIN) -#PRINTF_LIB = $(PRINTF_LIB_FLOAT) - - -# Minimalistic scanf version -SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min - -# Floating point + %[ scanf version (requires MATH_LIB = -lm below) -SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt - -# If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = -#SCANF_LIB = $(SCANF_LIB_MIN) -#SCANF_LIB = $(SCANF_LIB_FLOAT) - - -MATH_LIB = -lm -CREATE_MAP ?= yes - - #---------------- Linker Options ---------------- -# -Wl,...: tell GCC to pass this to linker. -# -Map: create map file -# --cref: add cross reference to map file -# -# Comennt out "--relax" option to avoid a error such: -# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12' -# +CREATE_MAP ?= yes ifeq ($(CREATE_MAP),yes) LDFLAGS += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref endif @@ -201,20 +113,11 @@ endif #LDFLAGS += -Wl,--relax LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) -LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) -#LDFLAGS += -T linker_script.x +LDFLAGS += -lm # You can give EXTRALDFLAGS at 'make' command line. LDFLAGS += $(EXTRALDFLAGS) #---------------- Assembler Listings ---------------- -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns: create listing -# -gstabs: have the assembler create line number information; note that -# for use in COFF files, additional information about filenames -# and function names needs to be present in the assembler source -# files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex -# dump that will be displayed for a given single line of source input. ADHLNS_ENABLE ?= no ifeq ($(ADHLNS_ENABLE),yes) diff --git a/builddefs/show_options.mk b/builddefs/show_options.mk index f67d009191..1c1c189f27 100644 --- a/builddefs/show_options.mk +++ b/builddefs/show_options.mk @@ -5,7 +5,6 @@ BUILD_OPTION_NAMES = \ CONSOLE_ENABLE \ COMMAND_ENABLE \ NKRO_ENABLE \ - TERMINAL_ENABLE \ CUSTOM_MATRIX \ DEBOUNCE_TYPE \ SPLIT_KEYBOARD \ diff --git a/docs/_summary.md b/docs/_summary.md index 11f5e1dd51..78d7f30ea4 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -88,7 +88,6 @@ * [Swap Hands](feature_swap_hands.md) * [Tap Dance](feature_tap_dance.md) * [Tap-Hold Configuration](tap_hold.md) - * [Terminal](feature_terminal.md) * [Unicode](feature_unicode.md) * [Userspace](feature_userspace.md) * [WPM Calculation](feature_wpm.md) diff --git a/docs/eeprom_driver.md b/docs/eeprom_driver.md index 6dcf10c04d..306ebacb3f 100644 --- a/docs/eeprom_driver.md +++ b/docs/eeprom_driver.md @@ -43,8 +43,9 @@ Module | Equivalent `#define` | Source -----------------|---------------------------------|------------------------------------------ CAT24C512 EEPROM | `#define EEPROM_I2C_CAT24C512` | <https://www.sparkfun.com/products/14764> RM24C512C EEPROM | `#define EEPROM_I2C_RM24C512C` | <https://www.sparkfun.com/products/14764> -24LC64 EEPROM | `#define EEPROM_I2C_24LC64` | <https://www.microchip.com/wwwproducts/en/24LC64> -24LC128 EEPROM | `#define EEPROM_I2C_24LC128` | <https://www.microchip.com/wwwproducts/en/24LC128> +24LC32A EEPROM | `#define EEPROM_I2C_24LC32A` | <https://www.microchip.com/en-us/product/24LC32A> +24LC64 EEPROM | `#define EEPROM_I2C_24LC64` | <https://www.microchip.com/en-us/product/24LC64> +24LC128 EEPROM | `#define EEPROM_I2C_24LC128` | <https://www.microchip.com/en-us/product/24LC128> 24LC256 EEPROM | `#define EEPROM_I2C_24LC256` | <https://www.sparkfun.com/products/525> MB85RC256V FRAM | `#define EEPROM_I2C_MB85RC256V` | <https://www.adafruit.com/product/1895> diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 295e610fc4..ec67e32078 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -409,6 +409,7 @@ You can use up to 2 AW20216 IC's. Do not specify `DRIVER_<N>_xxx` defines for IC | `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | | | `AW_SCALING_MAX` | (Optional) LED current scaling value (0-255, higher values mean LED is brighter at full PWM) | 150 | | `AW_GLOBAL_CURRENT_MAX` | (Optional) Driver global current limit (0-255, higher values means the driver may consume more power) | 150 | +| `AW_SPI_MODE` | (Optional) Mode for SPI communication (0-3, defines polarity and phase of the clock) | 3 | | `AW_SPI_DIVISOR` | (Optional) Clock divisor for SPI communication (powers of 2, smaller numbers means faster communication, should not be less than 4) | 4 | Here is an example using 2 drivers. diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md index 6ef70bf788..4fac083974 100644 --- a/docs/feature_split_keyboard.md +++ b/docs/feature_split_keyboard.md @@ -141,6 +141,9 @@ Next, you will have to flash the EEPROM files once for the correct hand to the c * ARM controllers with a DFU compatible bootloader (e.g. Proton-C): * `:dfu-util-split-left` * `:dfu-util-split-right` +* ARM controllers with a UF2 compatible bootloader: + * `:uf2-split-left` + * `:uf2-split-right` Example: diff --git a/docs/feature_terminal.md b/docs/feature_terminal.md deleted file mode 100644 index f850622165..0000000000 --- a/docs/feature_terminal.md +++ /dev/null @@ -1,107 +0,0 @@ -# Terminal - -> This feature is currently *huge*, and should probably only be put on boards with a lot of memory, or for fun. - -The terminal feature is a command-line-like interface designed to communicate through a text editor with keystrokes. It's beneficial to turn off auto-indent features in your editor. - -To enable, stick this in your `rules.mk` or `Makefile`: - - TERMINAL_ENABLE = yes - -And use the `TERM_ON` and `TERM_OFF` keycodes to turn it on or off. - -When enabled, a `> ` prompt will appear, where you'll be able to type, backspace (a bell will ding if you reach the beginning and audio is enabled), and hit enter to send the command. Arrow keys are currently disabled so it doesn't get confused. Moving your cursor around with the mouse is discouraged. - -`#define TERMINAL_HELP` enables some other output helpers that aren't really needed with this page. - -Pressing "up" and "down" will allow you to cycle through the past 5 commands entered. - -## Future Ideas - -* Keyboard/user-extensible commands -* Smaller footprint -* Arrow key support -* Command history - Done -* SD card support -* LCD support for buffer display -* Keycode -> name string LUT -* Layer status -* *Analog/digital port read/write* -* RGB mode stuff -* Macro definitions -* EEPROM read/write -* Audio control - -## Current Commands - -### `about` - -Prints out the current version of QMK with a build date: - -``` -> about -QMK Firmware - v0.5.115-7-g80ed73-dirty - Built: 2017-08-29-20:24:44 -``` - - -### `print-buffer` - -Outputs the last 5 commands entered - -``` -> print-buffer -0. print-buffer -1. help -2. about -3. keymap 0 -4. help -5. flush-buffer -``` - -### `flush-buffer` - -Clears command buffer -``` -> flush-buffer -Buffer cleared! -``` - - -### `help` - - -Prints out the available commands: - -``` -> help -commands available: - about help keycode keymap exit print-buffer flush-buffer -``` - -### `keycode <layer> <row> <col>` - -Prints out the keycode value of a certain layer, row, and column: - -``` -> keycode 0 1 0 -0x29 (41) -``` - -### `keymap <layer>` - -Prints out the entire keymap for a certain layer - -``` -> keymap 0 -0x002b, 0x0014, 0x001a, 0x0008, 0x0015, 0x0017, 0x001c, 0x0018, 0x000c, 0x0012, 0x0013, 0x002a, -0x0029, 0x0004, 0x0016, 0x0007, 0x0009, 0x000a, 0x000b, 0x000d, 0x000e, 0x000f, 0x0033, 0x0034, -0x00e1, 0x001d, 0x001b, 0x0006, 0x0019, 0x0005, 0x0011, 0x0010, 0x0036, 0x0037, 0x0038, 0x0028, -0x5cd6, 0x00e0, 0x00e2, 0x00e3, 0x5cd4, 0x002c, 0x002c, 0x5cd5, 0x0050, 0x0051, 0x0052, 0x004f, -> -``` - -### `exit` - -Exits the terminal - same as `TERM_OFF`. diff --git a/docs/flashing.md b/docs/flashing.md index 271e15b13c..dfb255f2dc 100644 --- a/docs/flashing.md +++ b/docs/flashing.md @@ -358,3 +358,7 @@ CLI Flashing sequence: 2. Wait for the OS to detect the device 3. Flash via QMK CLI eg. `qmk flash --keyboard handwired/onekey/blackpill_f411_tinyuf2 --keymap default` 4. Wait for the keyboard to become available + +### `make` Targets + +* `:uf2-split-left` and `:uf2-split-right`: Flashes the firmware but also sets the handedness setting in EEPROM by generating a side specific firmware. diff --git a/docs/ja/_summary.md b/docs/ja/_summary.md index 81b5756c27..8516a5eaaa 100644 --- a/docs/ja/_summary.md +++ b/docs/ja/_summary.md @@ -85,7 +85,6 @@ * [スワップハンド](ja/feature_swap_hands.md) * [タップダンス](ja/feature_tap_dance.md) * [タップホールド設定](ja/tap_hold.md) - * [ターミナル](ja/feature_terminal.md) * [ユニコード](ja/feature_unicode.md) * [ユーザスペース](ja/feature_userspace.md) * [WPM 計算](ja/feature_wpm.md) diff --git a/docs/ja/feature_terminal.md b/docs/ja/feature_terminal.md deleted file mode 100644 index 8e125ecee0..0000000000 --- a/docs/ja/feature_terminal.md +++ /dev/null @@ -1,112 +0,0 @@ -# ターミナル - -<!--- - original document: 0.8.147:docs/feature_terminal.md - git diff 0.8.147 HEAD -- docs/feature_terminal.md | cat ---> - -> この機能は現在のところ*巨大*であり、おそらく大量のメモリを搭載したキーボード、または楽しみのためにのみ配置する必要があります。 - -ターミナル機能はテキストエディタを介してキーストロークで通信するように設計されたコマンドラインのようなインタフェースです。エディタで自動インデント機能をオフにすることは有益です。 - -有効にするには、以下を `rules.mk` または `Makefile` に貼り付けます: - - TERMINAL_ENABLE = yes - -そして、オンまたはオフにするために、`TERM_ON` および `TERM_OFF` キーコードを使います。 - -有効な場合、`> ` プロンプトが現れ、ここでコマンドやバックスペース(オーディオが有効な場合は、先頭に到達するとベルが鳴ります)を入力することができ、エンターを入力するとコマンドを送信します。矢印キーは現在のところ無効なため、混乱することはありません。マウスでカーソルを移動することはお勧めしません。 - -`#define TERMINAL_HELP` は、このページでは実際には必要のない他の出力ヘルパーを有効にします。 - -"上矢印" および "下矢印" により、過去に入力した5つのコマンドを順に切り替えることができます。 - -## 今後のアイデア - -* キーボード/ユーザ拡張可能なコマンド -* より小さなフットプリント -* 矢印キーのサポート -* コマンド履歴 - 完了 -* SD カードのサポート -* バッファディスプレイのための LCD サポート -* キーコード -> 名称の対応表 -* レイヤー状態 -* *アナログ/デジタル ポートの読み込み/書き込み* -* RGB モード関連機能 -* マクロ定義 -* EEPROM の読み込み/書き込み -* オーディオ制御 - -## 現在のコマンド - -### `about` - -現在の QMK のバージョンとビルドした日の出力: - -``` -> about -QMK Firmware - v0.5.115-7-g80ed73-dirty - Built: 2017-08-29-20:24:44 -``` - - -### `print-buffer` - -最後に入力した5つのコマンドの出力 - -``` -> print-buffer -0. print-buffer -1. help -2. about -3. keymap 0 -4. help -5. flush-buffer -``` - -### `flush-buffer` - -コマンドバッファをクリア -``` -> flush-buffer -Buffer cleared! -``` - - -### `help` - - -利用可能なコマンドの出力: - -``` -> help -commands available: - about help keycode keymap exit print-buffer flush-buffer -``` - -### `keycode <layer> <row> <col>` - -特定のレイヤー、行および列のキーコード値の出力: - -``` -> keycode 0 1 0 -0x29 (41) -``` - -### `keymap <layer>` - -特定のレイヤーの全てのキーマップの出力 - -``` -> keymap 0 -0x002b, 0x0014, 0x001a, 0x0008, 0x0015, 0x0017, 0x001c, 0x0018, 0x000c, 0x0012, 0x0013, 0x002a, -0x0029, 0x0004, 0x0016, 0x0007, 0x0009, 0x000a, 0x000b, 0x000d, 0x000e, 0x000f, 0x0033, 0x0034, -0x00e1, 0x001d, 0x001b, 0x0006, 0x0019, 0x0005, 0x0011, 0x0010, 0x0036, 0x0037, 0x0038, 0x0028, -0x5cd6, 0x00e0, 0x00e2, 0x00e3, 0x5cd4, 0x002c, 0x002c, 0x5cd5, 0x0050, 0x0051, 0x0052, 0x004f, -> -``` - -### `exit` - -ターミナルの終了 - `TERM_OFF` と同じ。 diff --git a/docs/ja/understanding_qmk.md b/docs/ja/understanding_qmk.md index 1654f8e002..550ee3a7c0 100644 --- a/docs/ja/understanding_qmk.md +++ b/docs/ja/understanding_qmk.md @@ -161,7 +161,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115) * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77) * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94) - * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264) * [Quantum 固有のキーコードを識別して処理する](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291) この一連のイベントの中の任意のステップで (`process_record_kb()` のような)関数は `false` を返して、以降の処理を停止することができます。 diff --git a/docs/platformdev_chibios_earlyinit.md b/docs/platformdev_chibios_earlyinit.md index aaa91ba438..e1256f2714 100644 --- a/docs/platformdev_chibios_earlyinit.md +++ b/docs/platformdev_chibios_earlyinit.md @@ -20,7 +20,7 @@ As such, if you wish to override this API consider limiting use to writing to lo | `#define STM32_BOOTLOADER_DUAL_BANK` | Relevant for dual-bank STM32 MCUs, signifies that a GPIO is to be toggled in order to enter bootloader mode. | `FALSE` | | `#define STM32_BOOTLOADER_DUAL_BANK_GPIO` | Relevant for dual-bank STM32 MCUs, the pin to toggle when attempting to enter bootloader mode, e.g. `B8` | `<none>` | | `#define STM32_BOOTLOADER_DUAL_BANK_POLARITY` | Relevant for dual-bank STM32 MCUs, the value to set the pin to in order to trigger charging of the RC circuit. e.g. `0` or `1`. | `0` | -| `#define STM32_BOOTLOADER_DUAL_BANK_DELAY` | Relevant for dual-bank STM32 MCUs, an arbitrary measurement of time to delay before resetting the MCU. Increasing number increases the delay. | `100000` | +| `#define STM32_BOOTLOADER_DUAL_BANK_DELAY` | Relevant for dual-bank STM32 MCUs, an arbitrary measurement of time to delay before resetting the MCU. Increasing number increases the delay. | `100` | Kinetis MCUs have no configurable options. diff --git a/docs/understanding_qmk.md b/docs/understanding_qmk.md index 9b80fb179e..c1bcfe3ce9 100644 --- a/docs/understanding_qmk.md +++ b/docs/understanding_qmk.md @@ -155,7 +155,6 @@ The `process_record()` function itself is deceptively simple, but hidden within * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77) * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94) * `bool process_dynamic_tapping_term(uint16_t keycode, keyrecord_t *record)` - * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264) * [Identify and process Quantum-specific keycodes](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291) At any step during this chain of events a function (such as `process_record_kb()`) can `return false` to halt all further processing. diff --git a/docs/zh-cn/_summary.md b/docs/zh-cn/_summary.md index dbad1021fa..3baee6dc2e 100644 --- a/docs/zh-cn/_summary.md +++ b/docs/zh-cn/_summary.md @@ -91,7 +91,6 @@ * [换手](zh-cn/feature_swap_hands.md) * [一键多用](zh-cn/feature_tap_dance.md) * [点按配置](zh-cn/tap_hold.md) - * [终端](zh-cn/feature_terminal.md) * [Unicode](zh-cn/feature_unicode.md) * [用户空间](zh-cn/feature_userspace.md) * [WPM计算](zh-cn/feature_wpm.md) diff --git a/drivers/eeprom/eeprom_i2c.h b/drivers/eeprom/eeprom_i2c.h index 77eea66d63..85317c9ea5 100644 --- a/drivers/eeprom/eeprom_i2c.h +++ b/drivers/eeprom/eeprom_i2c.h @@ -54,6 +54,11 @@ # define EXTERNAL_EEPROM_PAGE_SIZE 32 # define EXTERNAL_EEPROM_ADDRESS_SIZE 2 # define EXTERNAL_EEPROM_WRITE_TIME 5 +#elif defined(EEPROM_I2C_24LC32A) +# define EXTERNAL_EEPROM_BYTE_COUNT 4096 +# define EXTERNAL_EEPROM_PAGE_SIZE 32 +# define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +# define EXTERNAL_EEPROM_WRITE_TIME 5 #elif defined(EEPROM_I2C_MB85RC256V) # define EXTERNAL_EEPROM_BYTE_COUNT 32768 # define EXTERNAL_EEPROM_PAGE_SIZE 128 diff --git a/drivers/led/aw20216.c b/drivers/led/aw20216.c index 448accdcd3..299434f909 100644 --- a/drivers/led/aw20216.c +++ b/drivers/led/aw20216.c @@ -53,6 +53,10 @@ # define AW_GLOBAL_CURRENT_MAX 150 #endif +#ifndef AW_SPI_MODE +# define AW_SPI_MODE 3 +#endif + #ifndef AW_SPI_DIVISOR # define AW_SPI_DIVISOR 4 #endif @@ -63,7 +67,7 @@ bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false}; bool AW20216_write(pin_t cs_pin, uint8_t page, uint8_t reg, uint8_t* data, uint8_t len) { static uint8_t s_spi_transfer_buffer[2] = {0}; - if (!spi_start(cs_pin, false, 3, AW_SPI_DIVISOR)) { + if (!spi_start(cs_pin, false, AW_SPI_MODE, AW_SPI_DIVISOR)) { spi_stop(); return false; } diff --git a/drivers/ps2/ps2.h b/drivers/ps2/ps2.h index f123192852..2465e16235 100644 --- a/drivers/ps2/ps2.h +++ b/drivers/ps2/ps2.h @@ -89,6 +89,7 @@ uint8_t ps2_host_send(uint8_t data); uint8_t ps2_host_recv_response(void); uint8_t ps2_host_recv(void); void ps2_host_set_led(uint8_t usb_led); +bool pbuf_has_data(void); /*-------------------------------------------------------------------- * static functions diff --git a/drivers/ps2/ps2_interrupt.c b/drivers/ps2/ps2_interrupt.c index c49b4f8b75..c9a9f1e1ec 100644 --- a/drivers/ps2/ps2_interrupt.c +++ b/drivers/ps2/ps2_interrupt.c @@ -66,8 +66,8 @@ uint8_t ps2_error = PS2_ERR_NONE; static inline uint8_t pbuf_dequeue(void); static inline void pbuf_enqueue(uint8_t data); -static inline bool pbuf_has_data(void); static inline void pbuf_clear(void); +bool pbuf_has_data(void); #if defined(PROTOCOL_CHIBIOS) void ps2_interrupt_service_routine(void); @@ -309,7 +309,7 @@ static inline uint8_t pbuf_dequeue(void) { return val; } -static inline bool pbuf_has_data(void) { +bool pbuf_has_data(void) { #if defined(__AVR__) uint8_t sreg = SREG; cli(); diff --git a/drivers/ps2/ps2_mouse.c b/drivers/ps2/ps2_mouse.c index ccb0a929ae..66b48bb3c3 100644 --- a/drivers/ps2/ps2_mouse.c +++ b/drivers/ps2/ps2_mouse.c @@ -53,6 +53,7 @@ void ps2_mouse_init(void) { ps2_mouse_set_remote_mode(); #else ps2_mouse_enable_data_reporting(); + ps2_mouse_set_stream_mode(); #endif #ifdef PS2_MOUSE_ENABLE_SCROLLING @@ -75,19 +76,33 @@ void ps2_mouse_task(void) { extern int tp_buttons; /* receives packet from mouse */ +#ifdef PS2_MOUSE_USE_REMOTE_MODE uint8_t rcv; rcv = ps2_host_send(PS2_MOUSE_READ_DATA); if (rcv == PS2_ACK) { mouse_report.buttons = ps2_host_recv_response() | tp_buttons; mouse_report.x = ps2_host_recv_response() * PS2_MOUSE_X_MULTIPLIER; mouse_report.y = ps2_host_recv_response() * PS2_MOUSE_Y_MULTIPLIER; -#ifdef PS2_MOUSE_ENABLE_SCROLLING +# ifdef PS2_MOUSE_ENABLE_SCROLLING mouse_report.v = -(ps2_host_recv_response() & PS2_MOUSE_SCROLL_MASK) * PS2_MOUSE_V_MULTIPLIER; -#endif +# endif + } else { + if (debug_mouse) print("ps2_mouse: fail to get mouse packet\n"); + return; + } +#else + if (pbuf_has_data()) { + mouse_report.buttons = ps2_host_recv_response() | tp_buttons; + mouse_report.x = ps2_host_recv_response() * PS2_MOUSE_X_MULTIPLIER; + mouse_report.y = ps2_host_recv_response() * PS2_MOUSE_Y_MULTIPLIER; +# ifdef PS2_MOUSE_ENABLE_SCROLLING + mouse_report.v = -(ps2_host_recv_response() & PS2_MOUSE_SCROLL_MASK) * PS2_MOUSE_V_MULTIPLIER; +# endif } else { if (debug_mouse) print("ps2_mouse: fail to get mouse packet\n"); return; } +#endif /* if mouse moves or buttons state changes */ if (mouse_report.x || mouse_report.y || mouse_report.v || ((mouse_report.buttons ^ buttons_prev) & PS2_MOUSE_BTN_MASK)) { diff --git a/keyboards/40percentclub/mf68/keymaps/delivrance/rules.mk b/keyboards/40percentclub/mf68/keymaps/delivrance/rules.mk index 5ac2ce5ccb..3d056cb71b 100644 --- a/keyboards/40percentclub/mf68/keymaps/delivrance/rules.mk +++ b/keyboards/40percentclub/mf68/keymaps/delivrance/rules.mk @@ -1,6 +1,5 @@ BACKLIGHT_DRIVER = custom NKRO_ENABLE = yes -TERMINAL_ENABLE = yes DYNAMIC_MACRO_ENABLE = yes # Use RAM (fake EEPROM, transient) instead of real EEPROM diff --git a/keyboards/ckeys/handwire_101/keymaps/default/keymap.c b/keyboards/ckeys/handwire_101/keymaps/default/keymap.c index 3bb1a2c009..3f5ebc8655 100755 --- a/keyboards/ckeys/handwire_101/keymaps/default/keymap.c +++ b/keyboards/ckeys/handwire_101/keymaps/default/keymap.c @@ -134,10 +134,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `--------=======------------------------' */ [_TERMINAL] = LAYOUT_ortho_4x4( - _______, TERM_ABOUT, _______, _______, - TERM_OFF, TERM_PRINT, _______, _______, - _______, TERM_FLUSH, _______, _______, - TERM_ON, TERM_HELP , _______, _______ + _______, TERM_ABOUT, _______, _______, + _______, TERM_PRINT, _______, _______, + _______, TERM_FLUSH, _______, _______, + _______, TERM_HELP , _______, _______ ), /* ADMIN * ,-----------------------------------------. diff --git a/keyboards/ckeys/handwire_101/rules.mk b/keyboards/ckeys/handwire_101/rules.mk index 8fa32bcee5..3131bb405a 100755 --- a/keyboards/ckeys/handwire_101/rules.mk +++ b/keyboards/ckeys/handwire_101/rules.mk @@ -12,7 +12,6 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration -TERMINAL_ENABLE = yes NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output diff --git a/keyboards/contra/keymaps/default/keymap.c b/keyboards/contra/keymaps/default/keymap.c index 6c05ebebff..1a365c9a6d 100644 --- a/keyboards/contra/keymaps/default/keymap.c +++ b/keyboards/contra/keymaps/default/keymap.c @@ -163,7 +163,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_planck_mit( _______, QK_BOOT, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) diff --git a/keyboards/delikeeb/vaneela/keymaps/default/keymap.c b/keyboards/delikeeb/vaneela/keymaps/default/keymap.c index b1d7401b9d..57df91cd4d 100644 --- a/keyboards/delikeeb/vaneela/keymaps/default/keymap.c +++ b/keyboards/delikeeb/vaneela/keymaps/default/keymap.c @@ -106,7 +106,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_FN] = LAYOUT_ortho_5x12( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, QK_BOOT, DEBUG, _______, _______, _______, _______, _______, _______,TERM_ON, TERM_OFF, KC_DEL, + _______, QK_BOOT, DEBUG, _______, _______, _______, _______, _______, _______,_______, _______, KC_DEL, _______, _______, _______, _______, _______, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ diff --git a/keyboards/delikeeb/vaneela/keymaps/via/keymap.c b/keyboards/delikeeb/vaneela/keymaps/via/keymap.c index 65194b84d3..4bfee3daf5 100644 --- a/keyboards/delikeeb/vaneela/keymaps/via/keymap.c +++ b/keyboards/delikeeb/vaneela/keymaps/via/keymap.c @@ -105,7 +105,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_FN] = LAYOUT_ortho_5x12( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, QK_BOOT, DEBUG, _______, _______, _______, _______, _______, _______,TERM_ON, TERM_OFF, KC_DEL, + _______, QK_BOOT, DEBUG, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, _______, _______, _______, _______, _______, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ diff --git a/keyboards/dm9records/plaid/keymaps/default/keymap.c b/keyboards/dm9records/plaid/keymaps/default/keymap.c index f11b744066..d96c250609 100644 --- a/keyboards/dm9records/plaid/keymaps/default/keymap.c +++ b/keyboards/dm9records/plaid/keymaps/default/keymap.c @@ -195,7 +195,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_plaid_grid( QK_BOOT,LED_1, LED_2, LED_3, LED_4, LED_5,LED_6, LED_7, LED_8, LED_9, LED_0,KC_DEL , _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) diff --git a/keyboards/doppelganger/doppelganger.c b/keyboards/doppelganger/doppelganger.c index 04d19480da..304d764028 100644 --- a/keyboards/doppelganger/doppelganger.c +++ b/keyboards/doppelganger/doppelganger.c @@ -15,25 +15,31 @@ */ #include "doppelganger.h" -void keyboard_pre_init_kb (void) { - setPinOutput(C6); - setPinOutput(B0); +void keyboard_pre_init_kb(void) { + setPinOutput(C6); + setPinOutput(B0); } bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res) { - // writePin sets the pin high for 1 and low for 0. - // In this example the pins are inverted, setting - // it low/0 turns it on, and high/1 turns the LED off. - // This behavior depends on whether the LED is between the pin - // and VCC or the pin and GND. - writePin(C6, !led_state.caps_lock); - } - return res; + bool res = led_update_user(led_state); + if (res) { + // writePin sets the pin high for 1 and low for 0. + // In this example the pins are inverted, setting + // it low/0 turns it on, and high/1 turns the LED off. + // This behavior depends on whether the LED is between the pin + // and VCC or the pin and GND. + writePin(C6, !led_state.caps_lock); + } + return res; } __attribute__((weak)) layer_state_t layer_state_set_user(layer_state_t state) { - writePin(B0, !(state & (1UL << 1))); - return state; + writePin(B0, !(state & (1UL << 1))); + return state; +} + +// Override core logic as we reuse SPLIT_HAND_PIN within matrix pins +bool is_keyboard_left(void) { + setPinInput(SPLIT_HAND_PIN); + return readPin(SPLIT_HAND_PIN); } diff --git a/keyboards/fractal/keymaps/default/keymap.c b/keyboards/fractal/keymaps/default/keymap.c index 6b0a8cc18c..ded4890d8c 100644 --- a/keyboards/fractal/keymaps/default/keymap.c +++ b/keyboards/fractal/keymaps/default/keymap.c @@ -158,7 +158,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = LAYOUT_ortho_5x12( KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - _______, QK_BOOT, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, + _______, QK_BOOT, DEBUG, _______, _______, _______, _______, _______, _______,_______, _______, KC_DEL, _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ diff --git a/keyboards/handwired/ortho_brass/keymaps/default/keymap.c b/keyboards/handwired/ortho_brass/keymaps/default/keymap.c index 948a7bd1bc..f32529b6a7 100644 --- a/keyboards/handwired/ortho_brass/keymaps/default/keymap.c +++ b/keyboards/handwired/ortho_brass/keymaps/default/keymap.c @@ -162,7 +162,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_ortho_4x12_1x2uC( _______, QK_BOOT, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) diff --git a/keyboards/handwired/riblee_f401/keymaps/default/keymap.c b/keyboards/handwired/riblee_f401/keymaps/default/keymap.c index 6892c0fb49..bee4de5ede 100644 --- a/keyboards/handwired/riblee_f401/keymaps/default/keymap.c +++ b/keyboards/handwired/riblee_f401/keymaps/default/keymap.c @@ -158,7 +158,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = LAYOUT_ortho_5x12( KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - _______, QK_BOOT, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, + _______, QK_BOOT, DEBUG, _______, _______, _______, _______, _______, _______,_______, _______, KC_DEL, _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, _______, _______, _______, _______, _______, _______, NK_TOGG, LCG_SWP, LCG_NRM, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ diff --git a/keyboards/handwired/riblee_f411/keymaps/default/keymap.c b/keyboards/handwired/riblee_f411/keymaps/default/keymap.c index 2e9485d6b9..ff7e1117b8 100644 --- a/keyboards/handwired/riblee_f411/keymaps/default/keymap.c +++ b/keyboards/handwired/riblee_f411/keymaps/default/keymap.c @@ -158,7 +158,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = LAYOUT_ortho_5x12( KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - _______, QK_BOOT, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, + _______, QK_BOOT, DEBUG, _______, _______, _______, _______, _______, _______,_______, _______, KC_DEL, _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, _______, _______, _______, _______, _______, _______, NK_TOGG, LCG_SWP, LCG_NRM, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ diff --git a/keyboards/handwired/rs60/keymaps/default/keymap.c b/keyboards/handwired/rs60/keymaps/default/keymap.c index 6b311a7ebb..6d5dc4a32a 100644 --- a/keyboards/handwired/rs60/keymaps/default/keymap.c +++ b/keyboards/handwired/rs60/keymaps/default/keymap.c @@ -155,7 +155,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = LAYOUT_ortho_5x12( KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - _______, QK_BOOT, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, + _______, QK_BOOT, DEBUG, _______, _______, _______, _______, _______, _______,_______, _______, KC_DEL, _______, _______, _______, _______, _______, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ diff --git a/keyboards/handwired/terminus_mini/keymaps/default/keymap.c b/keyboards/handwired/terminus_mini/keymaps/default/keymap.c index 8062aa711f..8d0631072f 100644 --- a/keyboards/handwired/terminus_mini/keymaps/default/keymap.c +++ b/keyboards/handwired/terminus_mini/keymaps/default/keymap.c @@ -193,7 +193,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = LAYOUT( - _______, _______, _______, _______, _______, QK_BOOT, _______, TERM_ON, TERM_OFF, _______, _______, KC_DEL, + _______, _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, KC_DEL, _______, _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ diff --git a/keyboards/keycapsss/o4l_5x12/keymaps/default/keymap.c b/keyboards/keycapsss/o4l_5x12/keymaps/default/keymap.c index 050b5a2c3e..2f64a56e9a 100644 --- a/keyboards/keycapsss/o4l_5x12/keymaps/default/keymap.c +++ b/keyboards/keycapsss/o4l_5x12/keymaps/default/keymap.c @@ -92,7 +92,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = LAYOUT_ortho_5x12( KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - _______, QK_BOOT, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, + _______, QK_BOOT, DEBUG, _______, _______, _______, _______, _______, _______,_______, _______, KC_DEL, _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, _______, _______, _______, _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ diff --git a/keyboards/massdrop/alt/keymaps/pregame/rules.mk b/keyboards/massdrop/alt/keymaps/pregame/rules.mk index 184405662a..5981633f7c 100644 --- a/keyboards/massdrop/alt/keymaps/pregame/rules.mk +++ b/keyboards/massdrop/alt/keymaps/pregame/rules.mk @@ -8,7 +8,6 @@ DYNAMIC_MACRO_ENABLE = no # Dynamic macro recording and play MOUSEKEY_ENABLE = no # Enable mouse control keycodes. Increases firmware size. TAP_DANCE_ENABLE = no # Enable tap dance keys CONSOLE_ENABLE = no # Enable debugging console. Increases firmware size. -TERMINAL_ENABLE = no EXTRAKEY_ENABLE = yes # Audio control and System control # RAW_ENABLE = yes # Raw HID has not yet been implemented for this keyboard # COMBO_ENABLE # Key combo feature diff --git a/keyboards/massdrop/ctrl/keymaps/endgame/rules.mk b/keyboards/massdrop/ctrl/keymaps/endgame/rules.mk index 9502c242dd..c4fab8ad53 100644 --- a/keyboards/massdrop/ctrl/keymaps/endgame/rules.mk +++ b/keyboards/massdrop/ctrl/keymaps/endgame/rules.mk @@ -7,7 +7,6 @@ MOUSEKEY_ENABLE = yes # Enable mouse control keycodes. Increases firmware size TAP_DANCE_ENABLE = yes # Enable tap dance keys CONSOLE_ENABLE = yes # Enable debugging console. Increases firmware size. SRC += config_led.c # Used to add files to the compilation/linking list. -TERMINAL_ENABLE = yes EXTRAKEY_ENABLE = yes # Audio control and System control # RAW_ENABLE = yes # Raw HID has not yet been implemented for this keyboard # COMBO_ENABLE # Key combo feature diff --git a/keyboards/massdrop/ctrl/keymaps/matthewrobo/rules.mk b/keyboards/massdrop/ctrl/keymaps/matthewrobo/rules.mk index e834404e29..4bb43f525b 100644 --- a/keyboards/massdrop/ctrl/keymaps/matthewrobo/rules.mk +++ b/keyboards/massdrop/ctrl/keymaps/matthewrobo/rules.mk @@ -7,7 +7,6 @@ MOUSEKEY_ENABLE = no # Enable mouse control keycodes. Increases firmware size. TAP_DANCE_ENABLE = no # Enable tap dance keys CONSOLE_ENABLE = no # Enable debugging console. Increases firmware size. SRC += config_led.c # Used to add files to the compilation/linking list. -TERMINAL_ENABLE = no EXTRAKEY_ENABLE = yes # Audio control and System control #RAW_ENABLE = yes #Raw HID has not yet been implemented for this keyboard #COMBO_ENABLE #Key combo feature diff --git a/keyboards/massdrop/ctrl/keymaps/xanimos/rules.mk b/keyboards/massdrop/ctrl/keymaps/xanimos/rules.mk index 43a312ce4e..2913eff83b 100644 --- a/keyboards/massdrop/ctrl/keymaps/xanimos/rules.mk +++ b/keyboards/massdrop/ctrl/keymaps/xanimos/rules.mk @@ -8,7 +8,6 @@ TAP_DANCE_ENABLE = yes # Enable tap dance keys CONSOLE_ENABLE = no # Enable debugging console. Increases firmware size. SRC += config_led.c # Used to add files to the compilation/linking list. EXTRAKEY_ENABLE = yes # Audio control and System control -TERMINAL_ENABLE = no # RAW_ENABLE = yes # Raw HID has not yet been implemented for this keyboard # COMBO_ENABLE # Key combo feature # LEADER_ENABLE # Enable leader key chording diff --git a/keyboards/mlego/m48/keymaps/default/keymap.c b/keyboards/mlego/m48/keymaps/default/keymap.c index 5eb40a332a..175f42b9b9 100644 --- a/keyboards/mlego/m48/keymaps/default/keymap.c +++ b/keyboards/mlego/m48/keymaps/default/keymap.c @@ -106,10 +106,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_ADJ] = LAYOUT_ortho_4x12( - _______, QK_BOOT, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , - _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, QK_BOOT, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL, + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/keyboards/planck/keymaps/default/keymap.c b/keyboards/planck/keymaps/default/keymap.c index 3453d41746..8041e0bada 100644 --- a/keyboards/planck/keymaps/default/keymap.c +++ b/keyboards/planck/keymaps/default/keymap.c @@ -165,7 +165,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_planck_grid( _______, QK_BOOT, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) diff --git a/keyboards/planck/keymaps/roguepullrequest/rules.mk b/keyboards/planck/keymaps/roguepullrequest/rules.mk index 9394c96e5b..5eb053e886 100644 --- a/keyboards/planck/keymaps/roguepullrequest/rules.mk +++ b/keyboards/planck/keymaps/roguepullrequest/rules.mk @@ -1,4 +1,3 @@ AUDIO_ENABLE = yes COMMAND_ENABLE = no -TERMINAL_ENABLE = no TAP_DANCE_ENABLE = yes diff --git a/keyboards/planck/keymaps/rootiest/rules.mk b/keyboards/planck/keymaps/rootiest/rules.mk index b669d8bb7d..ca0f90b6e9 100644 --- a/keyboards/planck/keymaps/rootiest/rules.mk +++ b/keyboards/planck/keymaps/rootiest/rules.mk @@ -20,8 +20,5 @@ KEY_LOCK_ENABLE = yes # Enables using lock key to maintain holds # SWAP_HANDS_ENABLE = yes # Enables the swap hands function # DEBOUNCE_TYPE = sym_eager_pk # Change debounce algorithm -# NOTE: The following requires a lot of memory to include -TERMINAL_ENABLE = yes # Enables a command-line-like interface designed to communicate through a text editor with keystrokes - # NOTE: The following is not yet available in main qmk branch KEY_OVERRIDE_ENABLE = yes # Allows overiding modifier combos (change Shift+1 without affecting 1 or Shift's normal operation) diff --git a/keyboards/planck/keymaps/synth_sample/keymap.c b/keyboards/planck/keymaps/synth_sample/keymap.c index 0a57b7ce9a..124c01cb05 100644 --- a/keyboards/planck/keymaps/synth_sample/keymap.c +++ b/keyboards/planck/keymaps/synth_sample/keymap.c @@ -160,10 +160,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT_planck_grid( - _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , - _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/keyboards/planck/keymaps/synth_wavetable/keymap.c b/keyboards/planck/keymaps/synth_wavetable/keymap.c index d413d63896..a5c5491ebd 100644 --- a/keyboards/planck/keymaps/synth_wavetable/keymap.c +++ b/keyboards/planck/keymaps/synth_wavetable/keymap.c @@ -160,10 +160,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT_planck_grid( - _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , - _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/keyboards/preonic/keymaps/default/keymap.c b/keyboards/preonic/keymaps/default/keymap.c index ef7614393d..c1faf464d6 100644 --- a/keyboards/preonic/keymaps/default/keymap.c +++ b/keyboards/preonic/keymaps/default/keymap.c @@ -157,7 +157,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = LAYOUT_preonic_grid( KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - _______, QK_BOOT, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, + _______, QK_BOOT, DEBUG, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ diff --git a/keyboards/splitkb/kyria/keymaps/j-inc/rules.mk b/keyboards/splitkb/kyria/keymaps/j-inc/rules.mk index 000c995025..ee07f52ff1 100644 --- a/keyboards/splitkb/kyria/keymaps/j-inc/rules.mk +++ b/keyboards/splitkb/kyria/keymaps/j-inc/rules.mk @@ -9,7 +9,6 @@ MOUSEKEY_ENABLE = no TAP_DANCE_ENABLE = no STENO_ENABLE = no BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -TERMINAL_ENABLE = no GRAVE_ESC_ENABLE = no MAGIC_ENABLE = no SPACE_CADET_ENABLE = no diff --git a/keyboards/work_louder/work_board/keymaps/default/keymap.c b/keyboards/work_louder/work_board/keymaps/default/keymap.c index 59bb437d9d..cae65ff5c2 100644 --- a/keyboards/work_louder/work_board/keymaps/default/keymap.c +++ b/keyboards/work_louder/work_board/keymaps/default/keymap.c @@ -144,9 +144,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT( - _______, QK_BOOT, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , _______, - _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, + _______, QK_BOOT, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , _______, + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) diff --git a/lib/python/qmk/cli/flash.py b/lib/python/qmk/cli/flash.py index 28e48a4101..3ff4a318df 100644 --- a/lib/python/qmk/cli/flash.py +++ b/lib/python/qmk/cli/flash.py @@ -33,6 +33,8 @@ def print_bootloader_help(): cli.echo('\tdfu-split-right') cli.echo('\tdfu-util-split-left') cli.echo('\tdfu-util-split-right') + cli.echo('\tuf2-split-left') + cli.echo('\tuf2-split-right') cli.echo('For more info, visit https://docs.qmk.fm/#/flashing') diff --git a/platforms/arm_atsam/platform.mk b/platforms/arm_atsam/platform.mk index b49bf764d7..9618838dc3 100644 --- a/platforms/arm_atsam/platform.mk +++ b/platforms/arm_atsam/platform.mk @@ -30,7 +30,7 @@ COMPILEFLAGS += -mthumb CFLAGS += $(COMPILEFLAGS) CXXFLAGS += $(COMPILEFLAGS) -CXXFLAGS += -fno-exceptions -std=c++11 +CXXFLAGS += -fno-exceptions $(CXXSTANDARD) LDFLAGS +=-Wl,--gc-sections LDFLAGS += -Wl,-Map="%OUT%%PROJ_NAME%.map" diff --git a/platforms/avr/drivers/ps2/ps2_usart.c b/platforms/avr/drivers/ps2/ps2_usart.c index 39ec930d4a..581badac64 100644 --- a/platforms/avr/drivers/ps2/ps2_usart.c +++ b/platforms/avr/drivers/ps2/ps2_usart.c @@ -72,8 +72,8 @@ uint8_t ps2_error = PS2_ERR_NONE; static inline uint8_t pbuf_dequeue(void); static inline void pbuf_enqueue(uint8_t data); -static inline bool pbuf_has_data(void); static inline void pbuf_clear(void); +bool pbuf_has_data(void); void ps2_host_init(void) { idle(); // without this many USART errors occur when cable is disconnected @@ -212,7 +212,7 @@ static inline uint8_t pbuf_dequeue(void) { return val; } -static inline bool pbuf_has_data(void) { +bool pbuf_has_data(void) { uint8_t sreg = SREG; cli(); bool has_data = (pbuf_head != pbuf_tail); diff --git a/platforms/avr/platform.mk b/platforms/avr/platform.mk index 978199b385..b51a94c93a 100644 --- a/platforms/avr/platform.mk +++ b/platforms/avr/platform.mk @@ -38,7 +38,7 @@ CFLAGS += -fno-inline-small-functions CFLAGS += -fno-strict-aliasing CXXFLAGS += $(COMPILEFLAGS) -CXXFLAGS += -fno-exceptions -std=c++11 +CXXFLAGS += -fno-exceptions $(CXXSTANDARD) LDFLAGS += -Wl,--gc-sections diff --git a/platforms/chibios/bootloaders/stm32_dfu.c b/platforms/chibios/bootloaders/stm32_dfu.c index ff866bd2bc..7b4ab86033 100644 --- a/platforms/chibios/bootloaders/stm32_dfu.c +++ b/platforms/chibios/bootloaders/stm32_dfu.c @@ -38,7 +38,7 @@ extern uint32_t __ram0_end__; # endif # ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY -# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000 +# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100 # endif __attribute__((weak)) void bootloader_jump(void) { @@ -55,7 +55,7 @@ __attribute__((weak)) void bootloader_jump(void) { # endif // Wait for a while for the capacitor to charge - wait_ms(100); + wait_ms(STM32_BOOTLOADER_DUAL_BANK_DELAY); // Issue a system reset to get the ROM bootloader to execute, with BOOT0 high NVIC_SystemReset(); diff --git a/platforms/chibios/flash.mk b/platforms/chibios/flash.mk index a91ef2cf35..86bbc22943 100644 --- a/platforms/chibios/flash.mk +++ b/platforms/chibios/flash.mk @@ -54,11 +54,11 @@ endef # TODO: Remove once ARM has a way to configure EECONFIG_HANDEDNESS # within the emulated eeprom via dfu-util or another tool -ifneq (,$(filter $(MAKECMDGOALS),dfu-util-split-left)) +ifneq (,$(filter $(MAKECMDGOALS), dfu-util-split-left uf2-split-left)) OPT_DEFS += -DINIT_EE_HANDS_LEFT endif -ifneq (,$(filter $(MAKECMDGOALS),dfu-util-split-right)) +ifneq (,$(filter $(MAKECMDGOALS), dfu-util-split-right uf2-split-right)) OPT_DEFS += -DINIT_EE_HANDS_RIGHT endif @@ -66,6 +66,10 @@ dfu-util-split-left: dfu-util dfu-util-split-right: dfu-util +uf2-split-left: flash + +uf2-split-right: flash + ST_LINK_CLI ?= st-link_cli ST_LINK_ARGS ?= diff --git a/platforms/test/platform.mk b/platforms/test/platform.mk index eb2424ec5c..f07c863e69 100644 --- a/platforms/test/platform.mk +++ b/platforms/test/platform.mk @@ -31,4 +31,4 @@ CFLAGS += -fno-strict-aliasing CXXFLAGS += $(COMPILEFLAGS) CXXFLAGS += -fno-exceptions -CXXFLAGS += -std=gnu++11 +CXXFLAGS += $(CXXSTANDARD) diff --git a/quantum/action.c b/quantum/action.c index 4e81a5466f..83f6e2a970 100644 --- a/quantum/action.c +++ b/quantum/action.c @@ -844,7 +844,7 @@ __attribute__((weak)) void register_code(uint8_t code) { # endif add_key(KC_CAPS_LOCK); send_keyboard_report(); - wait_ms(100); + wait_ms(TAP_HOLD_CAPS_DELAY); del_key(KC_CAPS_LOCK); send_keyboard_report(); } diff --git a/quantum/keymap.h b/quantum/keymap.h index d64b271efb..081bc54ebe 100644 --- a/quantum/keymap.h +++ b/quantum/keymap.h @@ -55,3 +55,5 @@ extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; // Ensure we have a forward declaration for the encoder map # include "encoder.h" #endif + +#include "keymap_introspection.h" diff --git a/quantum/keymap_introspection.c b/quantum/keymap_introspection.c new file mode 100644 index 0000000000..9628b41eef --- /dev/null +++ b/quantum/keymap_introspection.c @@ -0,0 +1,25 @@ +// Copyright 2022 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later + +// Pull the actual keymap code so that we can inspect stuff from it +#include KEYMAP_C + +#include "keymap_introspection.h" + +#define NUM_KEYMAP_LAYERS ((uint8_t)(sizeof(keymaps) / ((MATRIX_ROWS) * (MATRIX_COLS) * sizeof(uint16_t)))) + +uint8_t keymap_layer_count(void) { + return NUM_KEYMAP_LAYERS; +} + +#if defined(ENCODER_ENABLE) && defined(ENCODER_MAP_ENABLE) + +# define NUM_ENCODERMAP_LAYERS ((uint8_t)(sizeof(encoder_map) / ((NUM_ENCODERS) * (2) * sizeof(uint16_t)))) + +uint8_t encodermap_layer_count(void) { + return NUM_ENCODERMAP_LAYERS; +} + +_Static_assert(NUM_KEYMAP_LAYERS == NUM_ENCODERMAP_LAYERS, "Number of encoder_map layers doesn't match the number of keymap layers"); + +#endif // defined(ENCODER_ENABLE) && defined(ENCODER_MAP_ENABLE) diff --git a/quantum/keymap_introspection.h b/quantum/keymap_introspection.h new file mode 100644 index 0000000000..23f6f2016f --- /dev/null +++ b/quantum/keymap_introspection.h @@ -0,0 +1,15 @@ +// Copyright 2022 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +#include <stdint.h> + +// Get the number of layers defined in the keymap +uint8_t keymap_layer_count(void); + +#if defined(ENCODER_ENABLE) && defined(ENCODER_MAP_ENABLE) + +// Get the number of layers defined in the encoder map +uint8_t encodermap_layer_count(void); + +#endif // defined(ENCODER_ENABLE) && defined(ENCODER_MAP_ENABLE) diff --git a/quantum/process_keycode/process_terminal.c b/quantum/process_keycode/process_terminal.c deleted file mode 100644 index da1c4d506f..0000000000 --- a/quantum/process_keycode/process_terminal.c +++ /dev/null @@ -1,330 +0,0 @@ -/* Copyright 2017 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "process_terminal.h" -#include <string.h> -#include "version.h" -#include <stdio.h> -#include <math.h> - -#ifndef CMD_BUFF_SIZE -# define CMD_BUFF_SIZE 5 -#endif - -bool terminal_enabled = false; -char buffer[80] = ""; -char cmd_buffer[CMD_BUFF_SIZE][80]; -bool cmd_buffer_enabled = true; // replace with ifdef? -char newline[2] = "\n"; -char arguments[6][20]; -bool firstTime = true; - -short int current_cmd_buffer_pos = 0; // used for up/down arrows - keeps track of where you are in the command buffer - -__attribute__((weak)) const char terminal_prompt[8] = "> "; - -#ifdef AUDIO_ENABLE -# ifndef TERMINAL_SONG -# define TERMINAL_SONG SONG(TERMINAL_SOUND) -# endif -float terminal_song[][2] = TERMINAL_SONG; -# define TERMINAL_BELL() PLAY_SONG(terminal_song) -#else -# define TERMINAL_BELL() -#endif - -__attribute__((weak)) const char keycode_to_ascii_lut[58] = {0, 0, 0, 0, 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', 0, 0, 0, '\t', ' ', '-', '=', '[', ']', '\\', 0, ';', '\'', '`', ',', '.', '/'}; - -__attribute__((weak)) const char shifted_keycode_to_ascii_lut[58] = {0, 0, 0, 0, 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z', '!', '@', '#', '$', '%', '^', '&', '*', '(', ')', 0, 0, 0, '\t', ' ', '_', '+', '{', '}', '|', 0, ':', '\'', '~', '<', '>', '?'}; - -struct stringcase { - char *string; - void (*func)(void); -} typedef stringcase; - -void enable_terminal(void) { - terminal_enabled = true; - strcpy(buffer, ""); - memset(cmd_buffer, 0, CMD_BUFF_SIZE * 80); - for (int i = 0; i < 6; i++) - strcpy(arguments[i], ""); - // select all text to start over - // SEND_STRING(SS_LCTL("a")); - send_string(terminal_prompt); -} - -void disable_terminal(void) { - terminal_enabled = false; - SEND_STRING("\n"); -} - -void push_to_cmd_buffer(void) { - if (cmd_buffer_enabled) { - if (cmd_buffer == NULL) { - return; - } else { - if (firstTime) { - firstTime = false; - strcpy(cmd_buffer[0], buffer); - return; - } - - for (int i = CMD_BUFF_SIZE - 1; i > 0; --i) { - strncpy(cmd_buffer[i], cmd_buffer[i - 1], 80); - } - - strcpy(cmd_buffer[0], buffer); - - return; - } - } -} - -void terminal_about(void) { - SEND_STRING("QMK Firmware\n"); - SEND_STRING(" v"); - SEND_STRING(QMK_VERSION); - SEND_STRING("\n" SS_TAP(X_HOME) " Built: "); - SEND_STRING(QMK_BUILDDATE); - send_string(newline); -#ifdef TERMINAL_HELP - if (strlen(arguments[1]) != 0) { - SEND_STRING("You entered: "); - send_string(arguments[1]); - send_string(newline); - } -#endif -} - -void terminal_help(void); - -extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; - -void terminal_keycode(void) { - if (strlen(arguments[1]) != 0 && strlen(arguments[2]) != 0 && strlen(arguments[3]) != 0) { - char keycode_dec[5]; - char keycode_hex[5]; - uint16_t layer = strtol(arguments[1], (char **)NULL, 10); - uint16_t row = strtol(arguments[2], (char **)NULL, 10); - uint16_t col = strtol(arguments[3], (char **)NULL, 10); - uint16_t keycode = pgm_read_word(&keymaps[layer][row][col]); - itoa(keycode, keycode_dec, 10); - itoa(keycode, keycode_hex, 16); - SEND_STRING("0x"); - send_string(keycode_hex); - SEND_STRING(" ("); - send_string(keycode_dec); - SEND_STRING(")\n"); - } else { -#ifdef TERMINAL_HELP - SEND_STRING("usage: keycode <layer> <row> <col>\n"); -#endif - } -} - -void terminal_keymap(void) { - if (strlen(arguments[1]) != 0) { - uint16_t layer = strtol(arguments[1], (char **)NULL, 10); - for (int r = 0; r < MATRIX_ROWS; r++) { - for (int c = 0; c < MATRIX_COLS; c++) { - uint16_t keycode = pgm_read_word(&keymaps[layer][r][c]); - char keycode_s[8]; - sprintf(keycode_s, "0x%04x,", keycode); - send_string(keycode_s); - } - send_string(newline); - } - } else { -#ifdef TERMINAL_HELP - SEND_STRING("usage: keymap <layer>\n"); -#endif - } -} - -void print_cmd_buff(void) { - /* without the below wait, a race condition can occur wherein the - buffer can be printed before it has been fully moved */ - wait_ms(250); - for (int i = 0; i < CMD_BUFF_SIZE; i++) { - char tmpChar = ' '; - itoa(i, &tmpChar, 10); - const char *tmpCnstCharStr = &tmpChar; // because sned_string wont take a normal char * - send_string(tmpCnstCharStr); - SEND_STRING(". "); - send_string(cmd_buffer[i]); - SEND_STRING("\n"); - } -} - -void flush_cmd_buffer(void) { - memset(cmd_buffer, 0, CMD_BUFF_SIZE * 80); - SEND_STRING("Buffer Cleared!\n"); -} - -stringcase terminal_cases[] = {{"about", terminal_about}, {"help", terminal_help}, {"keycode", terminal_keycode}, {"keymap", terminal_keymap}, {"flush-buffer", flush_cmd_buffer}, {"print-buffer", print_cmd_buff}, {"exit", disable_terminal}}; - -void terminal_help(void) { - SEND_STRING("commands available:\n "); - for (stringcase *case_p = terminal_cases; case_p != terminal_cases + sizeof(terminal_cases) / sizeof(terminal_cases[0]); case_p++) { - send_string(case_p->string); - SEND_STRING(" "); - } - send_string(newline); -} - -void command_not_found(void) { - wait_ms(50); // sometimes buffer isnt grabbed quick enough - SEND_STRING("command \""); - send_string(buffer); - SEND_STRING("\" not found\n"); -} - -void process_terminal_command(void) { - // we capture return bc of the order of events, so we need to manually send a newline - send_string(newline); - - char * pch; - uint8_t i = 0; - pch = strtok(buffer, " "); - while (pch != NULL) { - strcpy(arguments[i], pch); - pch = strtok(NULL, " "); - i++; - } - - bool command_found = false; - for (stringcase *case_p = terminal_cases; case_p != terminal_cases + sizeof(terminal_cases) / sizeof(terminal_cases[0]); case_p++) { - if (0 == strcmp(case_p->string, buffer)) { - command_found = true; - (*case_p->func)(); - break; - } - } - - if (!command_found) command_not_found(); - - if (terminal_enabled) { - strcpy(buffer, ""); - for (int i = 0; i < 6; i++) - strcpy(arguments[i], ""); - SEND_STRING(SS_TAP(X_HOME)); - send_string(terminal_prompt); - } -} -void check_pos(void) { - if (current_cmd_buffer_pos >= CMD_BUFF_SIZE) { // if over the top, move it back down to the top of the buffer so you can climb back down... - current_cmd_buffer_pos = CMD_BUFF_SIZE - 1; - } else if (current_cmd_buffer_pos < 0) { //...and if you fall under the bottom of the buffer, reset back to 0 so you can climb back up - current_cmd_buffer_pos = 0; - } -} - -bool process_terminal(uint16_t keycode, keyrecord_t *record) { - if (keycode == TERM_ON && record->event.pressed) { - enable_terminal(); - return false; - } - - if (terminal_enabled && record->event.pressed) { - if (keycode == TERM_OFF && record->event.pressed) { - disable_terminal(); - return false; - } - - if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { - keycode = keycode & 0xFF; - } - - if (keycode < 256) { - uint8_t str_len; - char char_to_add; - switch (keycode) { - case KC_ENTER: - case KC_KP_ENTER: - push_to_cmd_buffer(); - current_cmd_buffer_pos = 0; - process_terminal_command(); - return false; - break; - case KC_ESCAPE: - SEND_STRING("\n"); - enable_terminal(); - return false; - break; - case KC_BACKSPACE: - str_len = strlen(buffer); - if (str_len > 0) { - buffer[str_len - 1] = 0; - return true; - } else { - TERMINAL_BELL(); - return false; - } - break; - case KC_LEFT: - return false; - break; - case KC_RIGHT: - return false; - break; - case KC_UP: // 0 = recent - check_pos(); // check our current buffer position is valid - if (current_cmd_buffer_pos <= CMD_BUFF_SIZE - 1) { // once we get to the top, dont do anything - str_len = strlen(buffer); - for (int i = 0; i < str_len; ++i) { - send_string(SS_TAP(X_BSPACE)); // clear w/e is on the line already - // process_terminal(KC_BACKSPACE,record); - } - strncpy(buffer, cmd_buffer[current_cmd_buffer_pos], 80); - - send_string(buffer); - ++current_cmd_buffer_pos; // get ready to access the above cmd if up/down is pressed again - } - return false; - break; - case KC_DOWN: - check_pos(); - if (current_cmd_buffer_pos >= 0) { // once we get to the bottom, dont do anything - str_len = strlen(buffer); - for (int i = 0; i < str_len; ++i) { - send_string(SS_TAP(X_BSPACE)); // clear w/e is on the line already - // process_terminal(KC_BACKSPACE,record); - } - strncpy(buffer, cmd_buffer[current_cmd_buffer_pos], 79); - - send_string(buffer); - --current_cmd_buffer_pos; // get ready to access the above cmd if down/up is pressed again - } - return false; - break; - default: - if (keycode <= 58) { - char_to_add = 0; - if (get_mods() & (MOD_BIT(KC_LEFT_SHIFT) | MOD_BIT(KC_RIGHT_SHIFT))) { - char_to_add = shifted_keycode_to_ascii_lut[keycode]; - } else if (get_mods() == 0) { - char_to_add = keycode_to_ascii_lut[keycode]; - } - if (char_to_add != 0) { - strncat(buffer, &char_to_add, 1); - } - } - break; - } - } - } - return true; -} diff --git a/quantum/process_keycode/process_terminal.h b/quantum/process_keycode/process_terminal.h deleted file mode 100644 index 0159131e5b..0000000000 --- a/quantum/process_keycode/process_terminal.h +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2017 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -extern const char keycode_to_ascii_lut[58]; -extern const char shifted_keycode_to_ascii_lut[58]; -extern const char terminal_prompt[8]; -bool process_terminal(uint16_t keycode, keyrecord_t *record); diff --git a/quantum/process_keycode/process_terminal_nop.h b/quantum/process_keycode/process_terminal_nop.h deleted file mode 100644 index 36e25320c5..0000000000 --- a/quantum/process_keycode/process_terminal_nop.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2017 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -#define TERM_ON KC_NO -#define TERM_OFF KC_NO diff --git a/quantum/quantum.c b/quantum/quantum.c index 33121f6b95..d1cfb5fbe0 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -307,9 +307,6 @@ bool process_record_quantum(keyrecord_t *record) { #ifdef DYNAMIC_TAPPING_TERM_ENABLE process_dynamic_tapping_term(keycode, record) && #endif -#ifdef TERMINAL_ENABLE - process_terminal(keycode, record) && -#endif #ifdef SPACE_CADET_ENABLE process_space_cadet(keycode, record) && #endif diff --git a/quantum/quantum.h b/quantum/quantum.h index 92e1af1c40..8a7a20c706 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -141,12 +141,6 @@ extern layer_state_t layer_state; # include "process_key_lock.h" #endif -#ifdef TERMINAL_ENABLE -# include "process_terminal.h" -#else -# include "process_terminal_nop.h" -#endif - #ifdef SPACE_CADET_ENABLE # include "process_space_cadet.h" #endif diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index 40355d799a..869826ce19 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -473,9 +473,9 @@ enum quantum_keycodes { // Lock Key KC_LOCK, // 5D2B - // Terminal - TERM_ON, // 5D2C - TERM_OFF, // 5D2D + // Unused slots + UNUSED_000, // 5D2C + UNUSED_001, // 5D2D // Sequencer SQ_ON, // 5D2E diff --git a/quantum/quantum_keycodes_legacy.h b/quantum/quantum_keycodes_legacy.h index ed9455ee74..51380d9c50 100644 --- a/quantum/quantum_keycodes_legacy.h +++ b/quantum/quantum_keycodes_legacy.h @@ -11,3 +11,6 @@ #define KC_GESC QK_GRAVE_ESCAPE #define EEP_RST QK_CLEAR_EEPROM + +#define TERM_ON _Static_assert(false, "The Terminal feature has been removed from QMK. Please remove use of TERM_ON/TERM_OFF from your keymap.") +#define TERM_OFF _Static_assert(false, "The Terminal feature has been removed from QMK.. Please remove use of TERM_ON/TERM_OFF from your keymap.")
\ No newline at end of file diff --git a/quantum/split_common/split_util.c b/quantum/split_common/split_util.c index 7d50adf758..48b9cce6d4 100644 --- a/quantum/split_common/split_util.c +++ b/quantum/split_common/split_util.c @@ -57,8 +57,9 @@ static uint8_t connection_errors = 0; volatile bool isLeftHand = true; #if defined(SPLIT_USB_DETECT) +_Static_assert((SPLIT_USB_TIMEOUT / SPLIT_USB_TIMEOUT_POLL) <= UINT16_MAX, "Please lower SPLIT_USB_TIMEOUT and/or increase SPLIT_USB_TIMEOUT_POLL."); static bool usbIsActive(void) { - for (uint8_t i = 0; i < (SPLIT_USB_TIMEOUT / SPLIT_USB_TIMEOUT_POLL); i++) { + for (uint16_t i = 0; i < (SPLIT_USB_TIMEOUT / SPLIT_USB_TIMEOUT_POLL); i++) { // This will return true if a USB connection has been established if (usb_connected_state()) { return true; @@ -93,7 +94,6 @@ static uint8_t peek_matrix_intersection(pin_t out_pin, pin_t in_pin) { __attribute__((weak)) bool is_keyboard_left(void) { #if defined(SPLIT_HAND_PIN) // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand - setPinInput(SPLIT_HAND_PIN); # ifdef SPLIT_HAND_PIN_LOW_IS_LEFT return !readPin(SPLIT_HAND_PIN); # else @@ -132,6 +132,10 @@ __attribute__((weak)) bool is_keyboard_master(void) { // this code runs before the keyboard is fully initialized void split_pre_init(void) { +#if defined(SPLIT_HAND_PIN) + setPinInput(SPLIT_HAND_PIN); + wait_us(100); +#endif isLeftHand = is_keyboard_left(); #if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT) @@ -1,3 +1,7 @@ +# This is the `develop` branch! + +See the [Breaking Changes](https://docs.qmk.fm/#/breaking_changes) document for more information. + # Quantum Mechanical Keyboard Firmware [](https://github.com/qmk/qmk_firmware/tags) diff --git a/users/bcat/rules.mk b/users/bcat/rules.mk index 1ad2ee0aa8..090f7474eb 100644 --- a/users/bcat/rules.mk +++ b/users/bcat/rules.mk @@ -47,7 +47,6 @@ endif COMMAND_ENABLE = no CONSOLE_ENABLE = no MOUSEKEY_ENABLE = no -TERMINAL_ENABLE = no # Disable unwanted hardware options on all keyboards. (Some keyboards turn # these features on by default even though they aren't actually required.) |