diff options
89 files changed, 4479 insertions, 47 deletions
diff --git a/keyboards/custommk/genesis/config.h b/keyboards/custommk/genesis/config.h new file mode 100644 index 0000000000..a527737f00 --- /dev/null +++ b/keyboards/custommk/genesis/config.h @@ -0,0 +1,62 @@ +/* Copyright 2020 customMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xF35B +#define PRODUCT_ID 0xFAB0 +#define DEVICE_VER 0x0001 +#define MANUFACTURER customMK +#define PRODUCT Genesis + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F0, C7, C6, B6, B5 } +#define MATRIX_COL_PINS { F4, F5, D7, B4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define ENCODERS_PAD_A { F6, D2 } +#define ENCODERS_PAD_B { F7, D1 } +#define ENCODER_RESOLUTION 4 +#define TAP_CODE_DELAY 10 + +#define RGB_DI_PIN E6 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 13 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_LIMIT_VAL 128 + diff --git a/keyboards/custommk/genesis/genesis.c b/keyboards/custommk/genesis/genesis.c new file mode 100644 index 0000000000..47296dd804 --- /dev/null +++ b/keyboards/custommk/genesis/genesis.c @@ -0,0 +1,36 @@ +/* Copyright 2020 customMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "genesis.h" + +__attribute__((weak)) void encoder_update_user(uint8_t index, bool clockwise) { + /* top left encoder */ + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + /* top right encoder */ + else if (index == 1) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } +}
\ No newline at end of file diff --git a/keyboards/custommk/genesis/genesis.h b/keyboards/custommk/genesis/genesis.h new file mode 100644 index 0000000000..ad10736523 --- /dev/null +++ b/keyboards/custommk/genesis/genesis.h @@ -0,0 +1,48 @@ +/* Copyright 2020 customMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_numpad_5x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, \ + K20, K21, K22, K23, \ + K30, K31, K32, \ + K40, K42, K43 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, KC_NO }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, KC_NO }, \ + { K40, KC_NO, K42, K43 } \ +} + +#define LAYOUT_ortho_5x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33, \ + K40, K41, K42, K43 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 }, \ + { K40, K41, K42, K43 } \ +} + diff --git a/keyboards/custommk/genesis/info.json b/keyboards/custommk/genesis/info.json new file mode 100644 index 0000000000..ddba21f99e --- /dev/null +++ b/keyboards/custommk/genesis/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "Genesis", + "url": "https://www.customMK.com", + "maintainer": "customMK", + "width": 4, + "height": 5, + "layouts": { + "LAYOUT_ortho_5x4": { + "layout": [{"label":"MO(1)", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"Mute", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"Pg Up", "x":3, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Pg Dn", "x":3, "y":3}, {"label":"0", "x":0, "y":4}, {"label":"Spc", "x":1, "y":4}, {"label":".", "x":2, "y":4}, {"label":"Enter", "x":3, "y":4}] + }, + "LAYOUT_numpad_5x4": { + "layout": [{"label":"MO(1)", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Enter", "x":3, "y":3, "h":2}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}] + } + + } +}
\ No newline at end of file diff --git a/keyboards/custommk/genesis/keymaps/default/keymap.c b/keyboards/custommk/genesis/keymaps/default/keymap.c new file mode 100644 index 0000000000..1b061b034b --- /dev/null +++ b/keyboards/custommk/genesis/keymaps/default/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2020 customMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_ortho_5x4( + MO(1), KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_BSPC, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_CAPS, + KC_P0, KC_SPC, KC_PDOT, KC_ENT), + + [1] = LAYOUT_ortho_5x4( + KC_TRNS, KC_VOLU, RGB_TOG, RGB_MOD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_HUI, KC_TRNS, KC_TRNS, RGB_HUD), + +}; + + diff --git a/keyboards/custommk/genesis/keymaps/default/readme.md b/keyboards/custommk/genesis/keymaps/default/readme.md new file mode 100644 index 0000000000..202402d831 --- /dev/null +++ b/keyboards/custommk/genesis/keymaps/default/readme.md @@ -0,0 +1,6 @@ +# Default Genesis Macro Pad Layout + +This is the default layout for the Genesis Macro Pad. It assumes all 1u switches +and optional rotary encoder in the top-left or top-right corner for media volume +control. The top left switch activates Layer 1 which enables control of the RGB +underglow.
\ No newline at end of file diff --git a/keyboards/custommk/genesis/keymaps/numpad/keymap.c b/keyboards/custommk/genesis/keymaps/numpad/keymap.c new file mode 100644 index 0000000000..97970191da --- /dev/null +++ b/keyboards/custommk/genesis/keymaps/numpad/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2020 customMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_numpad_5x4( + MO(1), KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_ENT), + + [1] = LAYOUT_numpad_5x4( + KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, + KC_TRNS, KC_TRNS, KC_TRNS, + RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, + KC_TRNS, KC_TRNS, KC_TRNS, + RGB_HUI, KC_TRNS, RGB_HUD), + + [2] = LAYOUT_numpad_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_numpad_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), + +}; + + diff --git a/keyboards/custommk/genesis/keymaps/numpad/readme.md b/keyboards/custommk/genesis/keymaps/numpad/readme.md new file mode 100644 index 0000000000..795e4341a9 --- /dev/null +++ b/keyboards/custommk/genesis/keymaps/numpad/readme.md @@ -0,0 +1,3 @@ +# Numpad Genesis Macro Pad Layout + +This is the numpad layout for the Genesis Macro Pad. It assumes the 0, +, and enter keys are all 2u size, with an optional rotary encoder in the top-left or top-right corner for media volume control. The top left switch activates Layer 1 which enables control of the RGB underglow.
\ No newline at end of file diff --git a/keyboards/custommk/genesis/keymaps/via/keymap.c b/keyboards/custommk/genesis/keymaps/via/keymap.c new file mode 100644 index 0000000000..fe37554762 --- /dev/null +++ b/keyboards/custommk/genesis/keymaps/via/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2020 customMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_ortho_5x4( + MO(1), KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PGUP, + KC_P1, KC_P2, KC_P3, KC_PGDN, + KC_P0, KC_SPC, KC_PDOT, KC_PENT), + + [1] = LAYOUT_ortho_5x4( + KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; + + diff --git a/keyboards/custommk/genesis/keymaps/via/readme.md b/keyboards/custommk/genesis/keymaps/via/readme.md new file mode 100644 index 0000000000..aa70d62257 --- /dev/null +++ b/keyboards/custommk/genesis/keymaps/via/readme.md @@ -0,0 +1,3 @@ +# Genesis Macro Pad Layout for VIA + +This is the via layout for the Genesis Macro Pad. It is identical to the default 1u layout which assumes all 1u switches and optional rotary encoder in the top-left or top-right corner for media volume control. The top-left switch activates Layer 1 which enables control of the RGB underglow.
\ No newline at end of file diff --git a/keyboards/custommk/genesis/keymaps/via/rules.mk b/keyboards/custommk/genesis/keymaps/via/rules.mk new file mode 100644 index 0000000000..43061db1dd --- /dev/null +++ b/keyboards/custommk/genesis/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/custommk/genesis/readme.md b/keyboards/custommk/genesis/readme.md new file mode 100644 index 0000000000..58bd27121a --- /dev/null +++ b/keyboards/custommk/genesis/readme.md @@ -0,0 +1,22 @@ +# Genesis + + + + +Genesis is a 5x4 ortholinear macro pad designed and produced by customMK. + +* Keyboard Maintainer: [customMK](https://github.com/customMK) +* Hardware Supported: Genesis Macro Pad +* Hardware Availability: [customMK](https://shop.custommk.com/products/genesis_macropad) + +Make example for this keyboard (after setting up your build environment): + + make custommk/genesis:default + +Flashing example for this keyboard: + + make custommk/genesis:default:flash + +Genesis Macro Pad has qmk-dfu bootloader preinstalled. To enter the bootloader, run the flashing command above, and then either plug in the USB connection while holding the top-left key, or alternatively, plug in the USB connection and then press the reset button on the PCB + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/custommk/genesis/rules.mk b/keyboards/custommk/genesis/rules.mk new file mode 100644 index 0000000000..1556125ec7 --- /dev/null +++ b/keyboards/custommk/genesis/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/evyd13/nt980/config.h b/keyboards/evyd13/nt980/config.h new file mode 100644 index 0000000000..1509dde061 --- /dev/null +++ b/keyboards/evyd13/nt980/config.h @@ -0,0 +1,151 @@ +/* +Copyright 2020 Evy Dekkers + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0xAAF8 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT nt980 + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B0, B1, D1, D0, C6, C7, B5, B6, B4, D7, D4, D6 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, D3, D2 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define LED_NUM_LOCK_PIN B2 +#define LED_CAPS_LOCK_PIN B3 +#define LED_SCROLL_LOCK_PIN B7 +#define LED_PIN_ON_STATE 0 + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/nt980/info.json b/keyboards/evyd13/nt980/info.json new file mode 100644 index 0000000000..408e1287d3 --- /dev/null +++ b/keyboards/evyd13/nt980/info.json @@ -0,0 +1,333 @@ +{ + "keyboard_name": "nt980", + "url": "", + "maintainer": "maartenwut", + "width": 19.5, + "height": 6.75, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"Insert", "x":15.5, "y":0}, + {"label":"Delete", "x":16.5, "y":0}, + {"label":"PgUp", "x":17.5, "y":0}, + {"label":"PgDn", "x":18.5, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"@", "x":2, "y":1.5}, + {"label":"#", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + {"label":"Num Lock", "x":15.5, "y":1.5}, + {"label":"/", "x":16.5, "y":1.5}, + {"label":"*", "x":17.5, "y":1.5}, + {"label":"-", "x":18.5, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"|", "x":13.5, "y":2.5, "w":1.5}, + {"label":"7", "x":15.5, "y":2.5}, + {"label":"8", "x":16.5, "y":2.5}, + {"label":"9", "x":17.5, "y":2.5}, + {"label":"+", "x":18.5, "y":2.5, "h":2}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"|", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":3.5, "w":1.25}, + {"label":"4", "x":15.5, "y":3.5}, + {"label":"5", "x":16.5, "y":3.5}, + {"label":"6", "x":17.5, "y":3.5}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"|", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, + {"label":"\u2191", "x":14.25, "y":4.75}, + {"label":"1", "x":15.5, "y":4.5}, + {"label":"2", "x":16.5, "y":4.5}, + {"label":"3", "x":17.5, "y":4.5}, + {"label":"Enter", "x":18.5, "y":4.5, "h":2}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5}, + {"label":"Alt", "x":2.25, "y":5.5, "w":1.25}, + {"x":3.5, "y":5.5, "w":6.25}, + {"label":"Alt", "x":9.75, "y":5.5}, + {"label":"Ctrl", "x":10.75, "y":5.5}, + {"label":"Fn", "x":11.75, "y":5.5, "w":1.25}, + {"label":"\u2190", "x":13.25, "y":5.75}, + {"label":"\u2193", "x":14.25, "y":5.75}, + {"label":"\u2192", "x":15.25, "y":5.75}, + {"label":"0", "x":16.5, "y":5.5}, + {"label":".", "x":17.5, "y":5.5} + ] + }, + "LAYOUT_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"Insert", "x":15.5, "y":0}, + {"label":"Delete", "x":16.5, "y":0}, + {"label":"PgUp", "x":17.5, "y":0}, + {"label":"PgDn", "x":18.5, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"@", "x":2, "y":1.5}, + {"label":"#", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + {"label":"Num Lock", "x":15.5, "y":1.5}, + {"label":"/", "x":16.5, "y":1.5}, + {"label":"*", "x":17.5, "y":1.5}, + {"label":"-", "x":18.5, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"|", "x":13.5, "y":2.5, "w":1.5}, + {"label":"7", "x":15.5, "y":2.5}, + {"label":"8", "x":16.5, "y":2.5}, + {"label":"9", "x":17.5, "y":2.5}, + {"label":"+", "x":18.5, "y":2.5, "h":2}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + {"label":"4", "x":15.5, "y":3.5}, + {"label":"5", "x":16.5, "y":3.5}, + {"label":"6", "x":17.5, "y":3.5}, + + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, + {"label":"\u2191", "x":14.25, "y":4.75}, + {"label":"1", "x":15.5, "y":4.5}, + {"label":"2", "x":16.5, "y":4.5}, + {"label":"3", "x":17.5, "y":4.5}, + {"label":"Enter", "x":18.5, "y":4.5, "h":2}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5}, + {"label":"Alt", "x":2.25, "y":5.5, "w":1.25}, + {"x":3.5, "y":5.5, "w":6.25}, + {"label":"Alt", "x":9.75, "y":5.5}, + {"label":"Ctrl", "x":10.75, "y":5.5}, + {"label":"Fn", "x":11.75, "y":5.5, "w":1.25}, + {"label":"\u2190", "x":13.25, "y":5.75}, + {"label":"\u2193", "x":14.25, "y":5.75}, + {"label":"\u2192", "x":15.25, "y":5.75}, + {"label":"0", "x":16.5, "y":5.5}, + {"label":".", "x":17.5, "y":5.5} + ] + }, + "LAYOUT_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"Insert", "x":15.5, "y":0}, + {"label":"Delete", "x":16.5, "y":0}, + {"label":"PgUp", "x":17.5, "y":0}, + {"label":"PgDn", "x":18.5, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"@", "x":2, "y":1.5}, + {"label":"#", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + {"label":"Num Lock", "x":15.5, "y":1.5}, + {"label":"/", "x":16.5, "y":1.5}, + {"label":"*", "x":17.5, "y":1.5}, + {"label":"-", "x":18.5, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"7", "x":15.5, "y":2.5}, + {"label":"8", "x":16.5, "y":2.5}, + {"label":"9", "x":17.5, "y":2.5}, + {"label":"+", "x":18.5, "y":2.5, "h":2}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"|", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, + {"label":"4", "x":15.5, "y":3.5}, + {"label":"5", "x":16.5, "y":3.5}, + {"label":"6", "x":17.5, "y":3.5}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"|", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, + {"label":"\u2191", "x":14.25, "y":4.75}, + {"label":"1", "x":15.5, "y":4.5}, + {"label":"2", "x":16.5, "y":4.5}, + {"label":"3", "x":17.5, "y":4.5}, + {"label":"Enter", "x":18.5, "y":4.5, "h":2}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5}, + {"label":"Alt", "x":2.25, "y":5.5, "w":1.25}, + {"x":3.5, "y":5.5, "w":6.25}, + {"label":"Alt", "x":9.75, "y":5.5}, + {"label":"Ctrl", "x":10.75, "y":5.5}, + {"label":"Fn", "x":11.75, "y":5.5, "w":1.25}, + {"label":"\u2190", "x":13.25, "y":5.75}, + {"label":"\u2193", "x":14.25, "y":5.75}, + {"label":"\u2192", "x":15.25, "y":5.75}, + {"label":"0", "x":16.5, "y":5.5}, + {"label":".", "x":17.5, "y":5.5} + ] + } + } +}
\ No newline at end of file diff --git a/keyboards/evyd13/nt980/keymaps/default/keymap.c b/keyboards/evyd13/nt980/keymaps/default/keymap.c new file mode 100644 index 0000000000..1aae16b7c6 --- /dev/null +++ b/keyboards/evyd13/nt980/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_PGUP, KC_PGDN, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ), + [_FN] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_END, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, KC_APP, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/evyd13/nt980/keymaps/via/keymap.c b/keyboards/evyd13/nt980/keymaps/via/keymap.c new file mode 100644 index 0000000000..4000be9d04 --- /dev/null +++ b/keyboards/evyd13/nt980/keymaps/via/keymap.c @@ -0,0 +1,59 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_PGUP, KC_PGDN, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(_FN1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ), + [_FN1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_END, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, KC_APP, _______, _______, _______, _______, _______, _______ + ), + [_FN2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/evyd13/nt980/keymaps/via/rules.mk b/keyboards/evyd13/nt980/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/nt980/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/nt980/nt980.c b/keyboards/evyd13/nt980/nt980.c new file mode 100644 index 0000000000..e0113f1249 --- /dev/null +++ b/keyboards/evyd13/nt980/nt980.c @@ -0,0 +1,17 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "nt980.h" diff --git a/keyboards/evyd13/nt980/nt980.h b/keyboards/evyd13/nt980/nt980.h new file mode 100644 index 0000000000..7480c65360 --- /dev/null +++ b/keyboards/evyd13/nt980/nt980.h @@ -0,0 +1,97 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_all( \ + k00, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k18, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, k28, k38, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k57, k48, k58, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k67, k77, k68, \ + k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k96, k87, k97, k88, k98, \ + ka0, kb0, ka1, ka3, kb4, ka5, kb5, ka6, kb6, ka7, kb7, ka8 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08 }, \ + { XXX, k11, k12, k13, k14, k15, k16, k17, k18 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48 }, \ + { k50, k51, k52, k53, k54, k55, k56, k57, k58 }, \ + { k60, k61, k62, k63, k64, k65, k66, k67, k68 }, \ + { k70, k71, k72, k73, k74, k75, k76, k77, XXX }, \ + { k80, k81, k82, k83, k84, k85, k86, k87, k88 }, \ + { k90, k91, k92, k93, k94, k95, k96, k97, k98 }, \ + { ka0, ka1, XXX, ka3, XXX, ka5, ka6, ka7, ka8 }, \ + { kb0, XXX, XXX, XXX, kb4, kb5, kb6, kb7, XXX } \ +} + +#define LAYOUT_ansi( \ + k00, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k18, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, k28, k38, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k57, k48, k58, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76, k67, k77, k68, \ + k80, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k96, k87, k97, k88, k98, \ + ka0, kb0, ka1, ka3, kb4, ka5, kb5, ka6, kb6, ka7, kb7, ka8 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08 }, \ + { XXX, k11, k12, k13, k14, k15, k16, k17, k18 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48 }, \ + { k50, k51, k52, k53, k54, k55, k56, k57, k58 }, \ + { k60, k61, k62, k63, k64, k65, XXX, k67, k68 }, \ + { k70, k71, k72, k73, k74, k75, k76, k77, XXX }, \ + { k80, k81, k82, k83, k84, k85, k86, k87, k88 }, \ + { XXX, k91, k92, k93, k94, k95, k96, k97, k98 }, \ + { ka0, ka1, XXX, ka3, XXX, ka5, ka6, ka7, ka8 }, \ + { kb0, XXX, XXX, XXX, kb4, kb5, kb6, kb7, XXX } \ +} + +#define LAYOUT_iso( \ + k00, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k18, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, k28, k38, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k47, k57, k48, k58, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k67, k77, k68, \ + k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k96, k87, k97, k88, k98, \ + ka0, kb0, ka1, ka3, kb4, ka5, kb5, ka6, kb6, ka7, kb7, ka8 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08 }, \ + { XXX, k11, k12, k13, k14, k15, k16, k17, k18 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48 }, \ + { k50, k51, k52, k53, k54, k55, XXX, k57, k58 }, \ + { k60, k61, k62, k63, k64, k65, k66, k67, k68 }, \ + { k70, k71, k72, k73, k74, k75, k76, k77, XXX }, \ + { k80, k81, k82, k83, k84, k85, k86, k87, k88 }, \ + { k90, k91, k92, k93, k94, k95, k96, k97, k98 }, \ + { ka0, ka1, XXX, ka3, XXX, ka5, ka6, ka7, ka8 }, \ + { kb0, XXX, XXX, XXX, kb4, kb5, kb6, kb7, XXX } \ +} diff --git a/keyboards/evyd13/nt980/readme.md b/keyboards/evyd13/nt980/readme.md new file mode 100644 index 0000000000..238d437172 --- /dev/null +++ b/keyboards/evyd13/nt980/readme.md @@ -0,0 +1,17 @@ +# nt980 + +The nt980 is a direct replacement for the FC980m PCB from Leopold. + +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: nt980 PCB +* Hardware Availability: [GitHub](https://github.com/evyd13/nt-series/tree/main/nt-980) + +Make example for this keyboard (after setting up your build environment): + + make evyd13/nt980:default + +Flashing example for this keyboard: + + make evyd13/nt980:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/evyd13/nt980/rules.mk b/keyboards/evyd13/nt980/rules.mk new file mode 100644 index 0000000000..5c0d8f307c --- /dev/null +++ b/keyboards/evyd13/nt980/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/geekboards/macropad_v2/chconf.h b/keyboards/geekboards/macropad_v2/chconf.h new file mode 100644 index 0000000000..03f63da36a --- /dev/null +++ b/keyboards/geekboards/macropad_v2/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM FALSE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP FALSE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS FALSE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS FALSE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES FALSE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY FALSE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES FALSE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES FALSE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS FALSE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/geekboards/macropad_v2/config.h b/keyboards/geekboards/macropad_v2/config.h new file mode 100644 index 0000000000..5f11cdddb0 --- /dev/null +++ b/keyboards/geekboards/macropad_v2/config.h @@ -0,0 +1,78 @@ +/* Copyright 2020 Geekboards ltd. (geekboards.ru / geekboards.de) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x0483 +#define PRODUCT_ID 0xA372 +#define DEVICE_VER 0x0002 +#define MANUFACTURER GeekBoards +#define PRODUCT Macropad v2 + +/* key matrix size */ +#define MATRIX_ROWS 2 +#define MATRIX_COLS 4 + +#define DIRECT_PINS {{B13, B15, B3, B5}, {B12, B14, A13, B7}} +#define UNUSED_PINS + +#define RGBLED_NUM 42 +#define DRIVER_LED_TOTAL 42 +#define RGB_DI_PIN A7 + +// PWM RGB Underglow Defines +#define WS2812_PWM_DRIVER PWMD3 +#define WS2812_PWM_CHANNEL 2 +#define WS2812_PWM_PAL_MODE 1 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM3 +#define WS2812_DMA_CHANNEL 3 + +#ifdef RGB_MATRIX_ENABLE +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define DISABLE_RGB_MATRIX_ALPHAS_MODS +#define DISABLE_RGB_MATRIX_BAND_SAT +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN +#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL +#define DISABLE_RGB_MATRIX_RAINBOW_BEACON +#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define DISABLE_RGB_MATRIX_RAINDROPS +#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS + +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_UP_DOWN +#define RGB_MATRIX_STARTUP_SAT 255 +#define RGB_MATRIX_STARTUP_VAL 192 +#define RGB_MATRIX_STARTUP_SPD 30 +#endif //RGB_MATRIX_ENABLE + +#define RGB_DISABLE_WHEN_USB_SUSPENDED true +#define WAIT_FOR_USB + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 3 + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/geekboards/macropad_v2/halconf.h b/keyboards/geekboards/macropad_v2/halconf.h new file mode 100644 index 0000000000..adb1a90715 --- /dev/null +++ b/keyboards/geekboards/macropad_v2/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/geekboards/macropad_v2/info.json b/keyboards/geekboards/macropad_v2/info.json new file mode 100644 index 0000000000..144fbde1e6 --- /dev/null +++ b/keyboards/geekboards/macropad_v2/info.json @@ -0,0 +1,53 @@ +{ + "keyboard_name": "macropad_v2", + "url": "https://geekboards.ru/", + "maintainer": "ruddy17", + "width": 4, + "height": 2, + "layouts": { + "LAYOUT": { + "layout": [ + { + "label": "K0", + "x": 0, + "y": 0 + }, + { + "label": "K1", + "x": 1, + "y": 0 + }, + { + "label": "K2", + "x": 2, + "y": 0 + }, + { + "label": "K3", + "x": 3, + "y": 0 + }, + { + "label": "K4", + "x": 0, + "y": 1 + }, + { + "label": "K5", + "x": 1, + "y": 1 + }, + { + "label": "K6", + "x": 2, + "y": 1 + }, + { + "label": "K7", + "x": 3, + "y": 1 + } + ] + } + } +} diff --git a/keyboards/geekboards/macropad_v2/keymaps/default/keymap.c b/keyboards/geekboards/macropad_v2/keymaps/default/keymap.c new file mode 100644 index 0000000000..26ba55e65c --- /dev/null +++ b/keyboards/geekboards/macropad_v2/keymaps/default/keymap.c @@ -0,0 +1,23 @@ +/* Copyright 2020 Geekboards ltd. (geekboards.ru / geekboards.de) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_ortho_2x4( + KC_1, KC_2, KC_3, KC_4, + KC_5, KC_6, KC_7, KC_8 + ) +}; diff --git a/keyboards/geekboards/macropad_v2/keymaps/default/readme.md b/keyboards/geekboards/macropad_v2/keymaps/default/readme.md new file mode 100644 index 0000000000..8846bd5916 --- /dev/null +++ b/keyboards/geekboards/macropad_v2/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for Geekboards Macropad v2 diff --git a/keyboards/geekboards/macropad_v2/keymaps/via/config.h b/keyboards/geekboards/macropad_v2/keymaps/via/config.h new file mode 100644 index 0000000000..9d75edbe74 --- /dev/null +++ b/keyboards/geekboards/macropad_v2/keymaps/via/config.h @@ -0,0 +1,2 @@ +#define DYNAMIC_KEYMAP_LAYER_COUNT 4 +#define VIA_QMK_RGBLIGHT_ENABLE diff --git a/keyboards/geekboards/macropad_v2/keymaps/via/keymap.c b/keyboards/geekboards/macropad_v2/keymaps/via/keymap.c new file mode 100644 index 0000000000..6ca3402c3f --- /dev/null +++ b/keyboards/geekboards/macropad_v2/keymaps/via/keymap.c @@ -0,0 +1,83 @@ +/* Copyright 2020 Geekboards ltd. (geekboards.ru / geekboards.de) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H +#include "string.h" + +bool is_alt_tab_active = false; +uint16_t alt_tab_timer = 0; + +enum custom_keycodes { + ALT_TAB = USER00, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ortho_2x4( + LT(1, KC_MUTE), KC_VOLD, KC_VOLU, MACRO00, + ALT_TAB, KC_MPRV, KC_MNXT, KC_MPLY + ), + [1] = LAYOUT_ortho_2x4( + KC_TRNS, RGB_VAI, RGB_HUI, RGB_SPI, + RGB_MOD, RGB_VAD, RGB_HUD, RGB_SPD + ), + [2] = LAYOUT_ortho_2x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_ortho_2x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +//------------ SUPER ALTTAB --------------- +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case ALT_TAB: + if (record->event.pressed) { + if (!is_alt_tab_active) { + is_alt_tab_active = true; + register_code(KC_LALT); + } + alt_tab_timer = timer_read(); + register_code(KC_TAB); + } else { + unregister_code(KC_TAB); + } + break; + } + return true; +} + +void matrix_scan_user(void) { + if (is_alt_tab_active) { + if (timer_elapsed(alt_tab_timer) > 1000) { + unregister_code(KC_LALT); + is_alt_tab_active = false; + } + } +} + +void keyboard_post_init_user(void) { + // set default macro after reset (alt-tab) + uint8_t get[16] = {0}; + uint8_t zero[16] = {0}; + dynamic_keymap_macro_get_buffer(0,16,get); + if(memcmp(get, zero, 16) == 0) + { + uint8_t set[] = {2, 0xe2, 2, 0xe1, 3, 0xe1, 3, 0xe2, 0}; + dynamic_keymap_macro_set_buffer(0, 9, set); + } +}
\ No newline at end of file diff --git a/keyboards/geekboards/macropad_v2/keymaps/via/readme.md b/keyboards/geekboards/macropad_v2/keymaps/via/readme.md new file mode 100644 index 0000000000..79130f4d11 --- /dev/null +++ b/keyboards/geekboards/macropad_v2/keymaps/via/readme.md @@ -0,0 +1,3 @@ +# Geekboards Macropad v2 - VIA layout + +Flash with this layout to use [VIA](https://caniusevia.com/) for customising layout. diff --git a/keyboards/geekboards/macropad_v2/keymaps/via/rules.mk b/keyboards/geekboards/macropad_v2/keymaps/via/rules.mk new file mode 100644 index 0000000000..f2208a3b97 --- /dev/null +++ b/keyboards/geekboards/macropad_v2/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +# LTO_ENABLE = yes diff --git a/keyboards/geekboards/macropad_v2/macropad_v2.c b/keyboards/geekboards/macropad_v2/macropad_v2.c new file mode 100644 index 0000000000..df8581cc58 --- /dev/null +++ b/keyboards/geekboards/macropad_v2/macropad_v2.c @@ -0,0 +1,65 @@ +/* Copyright 2020 Geekboards ltd. (geekboards.ru / geekboards.de) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + // Key Matrix to LED Index + {13,19,20,26}, {6,0,38,33}, +}, { + // LED Index to Physical Position + {85,46}, + {85,64},{67,64},{49,64},{31,64},{13,64}, + {31,46}, + {0,55},{0,46},{0,37},{0,27},{0,18},{0,9}, + {31,18}, + {13,0},{31,0},{49,0},{67,0},{85,0}, + {85,18},{139,18}, + {139,0},{157,0},{175,0},{193,0},{211,0}, + {193,18}, + {224,9},{224,18},{224,27},{224,37},{224,46},{224,55}, + {193,46}, + {211,64},{193,64},{175,64},{157,64}, + {139,46}, + {139,64},{121,64},{103,64}, +}, { + // LED Index to Flag, 2=backlight, 4=key + 4, + 2, 2, 2, 2, 2, + 4, + 2, 2, 2, 2, 2, 2, + 4, + 2, 2, 2, 2, 2, + 4, 4, + 2, 2, 2, 2, 2, + 4, + 2, 2, 2, 2, 2, 2, + 4, + 2, 2, 2, 2, + 4, + 2, 2, 2 +} }; + +void suspend_power_down_kb(void) { + rgb_matrix_set_suspend_state(true); + suspend_power_down_user(); +} + +void suspend_wakeup_init_kb(void) { + rgb_matrix_set_suspend_state(false); + suspend_wakeup_init_user(); +} +#endif diff --git a/keyboards/geekboards/macropad_v2/macropad_v2.h b/keyboards/geekboards/macropad_v2/macropad_v2.h new file mode 100644 index 0000000000..7fe684deb7 --- /dev/null +++ b/keyboards/geekboards/macropad_v2/macropad_v2.h @@ -0,0 +1,26 @@ +/* Copyright 2020 Geekboards ltd. (geekboards.ru / geekboards.de) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_ortho_2x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13 \ +) { \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 } \ +} diff --git a/keyboards/geekboards/macropad_v2/mcuconf.h b/keyboards/geekboards/macropad_v2/mcuconf.h new file mode 100644 index 0000000000..271bd570b8 --- /dev/null +++ b/keyboards/geekboards/macropad_v2/mcuconf.h @@ -0,0 +1,178 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF +// #define STM32F070xB + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_HSI48_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_USBSW STM32_USBSW_HSI48 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 +#define STM32_GPT_TIM14_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 3 +#define STM32_I2C_I2C2_IRQ_PRIORITY 3 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +// #define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +// #define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/geekboards/macropad_v2/readme.md b/keyboards/geekboards/macropad_v2/readme.md new file mode 100644 index 0000000000..45bb7df6f3 --- /dev/null +++ b/keyboards/geekboards/macropad_v2/readme.md @@ -0,0 +1,32 @@ +# geekboards/macropad_v2 + + + +8-keys macropad with CNC aluminium case, RGB LEDs for both backlight and switches, hot-swap connectors. + +Keyboard Maintainer: [ruddy17](https://github.com/ruddy17) +Hardware Supported: Geekboards Macropad v2, STM32F072C8T6 +Hardware Availability: https://geekboards.ru + +Compile instruction for this keyboard (after setting up your build environment): + + make geekboards/macropad_v2:via + +## Update firmware +### Enter bootloader +1. Press and hold leftmost button on top row (where ESC usually is) +2. Plug in USB +3. Keep holding the button for 3 more seconds +4. Release the button + +Alternatively: +1. Remove bottom cover +1. On the pcb short together two contacts labeled BOOT0 +2. Plug in USB +3. Release BOOT0 + +### Flash + + make geekboards/macropad_v2:via:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/geekboards/macropad_v2/rules.mk b/keyboards/geekboards/macropad_v2/rules.mk new file mode 100644 index 0000000000..73575b6733 --- /dev/null +++ b/keyboards/geekboards/macropad_v2/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = STM32F072 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 +WS2812_DRIVER = pwm + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/hidtech/bastyl/bastyl.c b/keyboards/hidtech/bastyl/bastyl.c new file mode 100644 index 0000000000..637af1ffed --- /dev/null +++ b/keyboards/hidtech/bastyl/bastyl.c @@ -0,0 +1,19 @@ +/* + * Copyright 2020 Quentin LEBASTARD <qlebastard@gmail.com> + * Copyright 2020 Anthony MARIN <anthony@hidtech.ca> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bastyl.h" diff --git a/keyboards/hidtech/bastyl/bastyl.h b/keyboards/hidtech/bastyl/bastyl.h new file mode 100644 index 0000000000..5bacb8bb03 --- /dev/null +++ b/keyboards/hidtech/bastyl/bastyl.h @@ -0,0 +1,43 @@ +/* + * Copyright 2020 Quentin LEBASTARD <qlebastard@gmail.com> + * Copyright 2020 Anthony MARIN <anthony@hidtech.ca> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#pragma once +#include "quantum.h" + +// SWITCHED 91 and 95 - check on left ? +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k55, k54, k53, k52, k51, k50, \ + k10, k11, k12, k13, k14, k15, k65, k64, k63, k62, k61, k60, \ + k20, k21, k22, k23, k24, k25, k75, k74, k73, k72, k71, k70, \ + k30, k31, k32, k33, k34, k35, k85, k84, k83, k82, k81, k80, \ + k43, k44, k41, k91, k94, k93, \ + k45, k42, k92, k95 \ +)\ +{\ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k33, k34, k35 }, \ + { KC_NO, k41, k42, k43, k44, k45 }, \ + { k50, k51, k52, k53, k54, k55 }, \ + { k60, k61, k62, k63, k64, k65 }, \ + { k70, k71, k72, k73, k74, k75 }, \ + { k80, k81, k82, k83, k84, k85 }, \ + { KC_NO, k91, k92, k93, k94, k95 }, \ +} diff --git a/keyboards/hidtech/bastyl/config.h b/keyboards/hidtech/bastyl/config.h new file mode 100644 index 0000000000..ed33d84517 --- /dev/null +++ b/keyboards/hidtech/bastyl/config.h @@ -0,0 +1,40 @@ +/* + * Copyright 2020 Quentin LEBASTARD <qlebastard@gmail.com> + * Copyright 2020 Anthony MARIN <anthony@hidtech.ca> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "config_common.h" +#define VENDOR_ID 0xA76A +#define PRODUCT_ID 0x1827 +#define DEVICE_VER 0x0001 +#define MANUFACTURER HID Technologies +#define PRODUCT Bastyl + +#define MATRIX_ROWS 10 +#define MATRIX_COLS 6 +#define DIODE_DIRECTION ROW2COL +#define MATRIX_ROW_PINS { D7, B5, F7, F6, B6 } +#define MATRIX_COL_PINS { B4, E6, C6, B1, B3, B2 } +#define RGB_DI_PIN D2 +#define RGBLED_NUM 38 +#define RGBLIGHT_SPLIT +#define RGBLIGHT_ANIMATIONS +#define DEBOUNCE 5 +#define SOFT_SERIAL_PIN D0 +#define LOCKING_SUPPORT_ENABLE +#define LOCKING_RESYNC_ENABLE +#define MASTER_RIGHT diff --git a/keyboards/hidtech/bastyl/info.json b/keyboards/hidtech/bastyl/info.json new file mode 100644 index 0000000000..e8115794e1 --- /dev/null +++ b/keyboards/hidtech/bastyl/info.json @@ -0,0 +1,71 @@ +{ + "keyboard_name": "Bastyl", + "url": "https://www.hidtech.ca/?product=bastyl-black", + "maintainer": "HID-Technologies", + "width": 17, + "height": 8, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"L00", "x":0, "y":0}, + {"label":"L01", "x":1, "y":0}, + {"label":"L02", "x":2, "y":0}, + {"label":"L03", "x":3, "y":0}, + {"label":"L04", "x":4, "y":0}, + {"label":"L05", "x":5, "y":0}, + {"label":"R00", "x":11, "y":0}, + {"label":"R01", "x":12, "y":0}, + {"label":"R02", "x":13, "y":0}, + {"label":"R03", "x":14, "y":0}, + {"label":"R04", "x":15, "y":0}, + {"label":"R05", "x":16, "y":0}, + {"label":"L10", "x":0, "y":1}, + {"label":"L11", "x":1, "y":1}, + {"label":"L12", "x":2, "y":1}, + {"label":"L13", "x":3, "y":1}, + {"label":"L14", "x":4, "y":1}, + {"label":"L15", "x":5, "y":1}, + {"label":"R10", "x":11, "y":1}, + {"label":"R11", "x":12, "y":1}, + {"label":"R12", "x":13, "y":1}, + {"label":"R13", "x":14, "y":1}, + {"label":"R14", "x":15, "y":1}, + {"label":"R15", "x":16, "y":1}, + {"label":"L20", "x":0, "y":2}, + {"label":"L21", "x":1, "y":2}, + {"label":"L22", "x":2, "y":2}, + {"label":"L23", "x":3, "y":2}, + {"label":"L24", "x":4, "y":2}, + {"label":"L25", "x":5, "y":2}, + {"label":"R20", "x":11, "y":2}, + {"label":"R21", "x":12, "y":2}, + {"label":"R22", "x":13, "y":2}, + {"label":"R23", "x":14, "y":2}, + {"label":"R24", "x":15, "y":2}, + {"label":"R25", "x":16, "y":2}, + {"label":"L30", "x":0, "y":3}, + {"label":"L31", "x":1, "y":3}, + {"label":"L32", "x":2, "y":3}, + {"label":"L33", "x":3, "y":3}, + {"label":"L34", "x":4, "y":3}, + {"label":"L35", "x":5, "y":3}, + {"label":"R30", "x":11, "y":3}, + {"label":"R31", "x":12, "y":3}, + {"label":"R32", "x":13, "y":3}, + {"label":"R33", "x":14, "y":3}, + {"label":"R34", "x":15, "y":3}, + {"label":"R35", "x":16, "y":3}, + {"label":"L43", "x":5, "y":4}, + {"label":"L44", "x":6, "y":4}, + {"label":"L45", "x":7, "y":4}, + {"label":"R40", "x":9, "y":4}, + {"label":"R41", "x":10, "y":4}, + {"label":"R40", "x":11, "y":4}, + {"label":"L52", "x":6, "y":5}, + {"label":"L53", "x":7, "y":5}, + {"label":"R52", "x":9, "y":5}, + {"label":"R53", "x":10, "y":5} + ] + } + } +} diff --git a/keyboards/hidtech/bastyl/keymaps/default/keymap.c b/keyboards/hidtech/bastyl/keymaps/default/keymap.c new file mode 100644 index 0000000000..d6d291af54 --- /dev/null +++ b/keyboards/hidtech/bastyl/keymaps/default/keymap.c @@ -0,0 +1,61 @@ +/* + * Copyright 2020 Quentin LEBASTARD <qlebastard@gmail.com> + * Copyright 2020 Anthony MARIN <anthony@hidtech.ca> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, +//-------------------------------------------------//-----------------------------------------------------------// + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, +//-------------------------------------------------//-----------------------------------------------------------// + KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, +//-------------------------------------------------//-----------------------------------------------------------// + KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, +//-------------------------------------------------//-----------------------------------------------------------// + KC_LCTL, KC_SPC, MO(1), MO(2), KC_ENT, KC_RGUI, + KC_HOME, KC_BSPC, KC_DEL, KC_RALT + ), + + [1] = LAYOUT( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, +//---------------------------------------------------------//-----------------------------------------------------------// + RESET, _______, _______, _______, _______, KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, _______, KC_PLUS, +//---------------------------------------------------------//-----------------------------------------------------------// + _______, KC_HOME, KC_PGUP, KC_PGDN, KC_END, KC_LPRN, KC_RPRN, KC_P4, KC_P5, KC_P6, KC_MINS, KC_PIPE, +//---------------------------------------------------------//-----------------------------------------------------------// + _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_EQL, KC_UNDS, +//---------------------------------------------------------//-----------------------------------------------------------// + KC_LCTL, KC_HOME, KC_TRNS, KC_TRNS, KC_RALT, KC_RGUI, + KC_SPC, KC_BSPC, KC_RCTL, KC_ENT + ), + + [2] = LAYOUT( + KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, +//---------------------------------------------------------//--------------------------------------------------------------// + _______, _______, RGB_RMOD, RGB_TOG, RGB_MOD, KC_LBRC, KC_RBRC, _______, KC_NLCK, KC_INS, KC_SLCK, KC_MUTE, +//---------------------------------------------------------//--------------------------------------------------------------// + _______, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, KC_LPRN, KC_RPRN, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_VOLU, +//---------------------------------------------------------//--------------------------------------------------------------// + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, +//---------------------------------------------------------//--------------------------------------------------------------// + KC_LCTL, KC_HOME, KC_TRNS, KC_TRNS, KC_RALT, RESET, + KC_SPC, KC_BSPC, KC_RCTL, KC_ENT + ), +}; diff --git a/keyboards/hidtech/bastyl/readme.md b/keyboards/hidtech/bastyl/readme.md new file mode 100644 index 0000000000..f21f030a89 --- /dev/null +++ b/keyboards/hidtech/bastyl/readme.md @@ -0,0 +1,22 @@ +# Bastyl + +A split ergonomic keyboard. + +* Keyboard Maintainer: [HID Technologies](https://github.com/HID-Technologies) +* Hardware Supported: elite-C V4 +* Hardware Availability: [Hidtech.ca](https://www.hidtech.ca/) + +Make example for this keyboard (after setting up your build environment): + + make hidtech/bastyl:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +See the [keyboard build instructions](https://hid-technologies.github.io/Bastyl-DIY-instructions/) + + +## Important information regarding the reset + +If you modify this firmware, make sure to always have a RESET key that can be triggered using only the master side ! This way you ensure that you can always flash the keyboard, even if you mess up. + +Otherwise if you're stuck, open the case and reset manually by shorting Gnd and Rst, or pressing the RST button. diff --git a/keyboards/hidtech/bastyl/rules.mk b/keyboards/hidtech/bastyl/rules.mk new file mode 100644 index 0000000000..cc88208e33 --- /dev/null +++ b/keyboards/hidtech/bastyl/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +SPLIT_KEYBOARD = yes diff --git a/keyboards/kb_elmo/aek2_usb/config.h b/keyboards/kb_elmo/aek2_usb/config.h index f7b347f1db..e0fc83f17a 100644 --- a/keyboards/kb_elmo/aek2_usb/config.h +++ b/keyboards/kb_elmo/aek2_usb/config.h @@ -47,3 +47,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE + +/* reduce VIA layer count because of EEPROM size */ +#define DYNAMIC_KEYMAP_LAYER_COUNT 2 diff --git a/keyboards/kb_elmo/aek2_usb/keymaps/via/keymap.c b/keyboards/kb_elmo/aek2_usb/keymaps/via/keymap.c new file mode 100644 index 0000000000..c5ff48e23e --- /dev/null +++ b/keyboards/kb_elmo/aek2_usb/keymaps/via/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2020 kb-elmo<mail@elmo.space> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_MPLY, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PEQL, KC_PSLS, KC_PAST, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_LCAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + ), + [1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPRV, KC_MNXT, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/kb_elmo/aek2_usb/keymaps/via/rules.mk b/keyboards/kb_elmo/aek2_usb/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/kb_elmo/aek2_usb/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/mechwild/bde/lefty/config.h b/keyboards/mechwild/bde/lefty/config.h new file mode 100644 index 0000000000..082295ef7c --- /dev/null +++ b/keyboards/mechwild/bde/lefty/config.h @@ -0,0 +1,54 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6D77 // mw = "MechWild" +#define PRODUCT_ID 0x1701 +#define DEVICE_VER 0x0203 +#define MANUFACTURER MechWild +#define PRODUCT BDE Lefty + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 14 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D1, D7, D3} +#define MATRIX_COL_PINS { F7, B1, B6, B2, B3, F6, F5, F4, D0, D4, C6, E6, B5, B4} +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* If RGBLIGHT_ENABLE is set to yes in the rules, ensure the RGBLED_NUM is accurate for how many you have attached. */ +#define RGB_DI_PIN D2 +#define RGBLED_NUM 16 +#define RGBLIGHT_ANIMATIONS + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + diff --git a/keyboards/mechwild/bde/lefty/info.json b/keyboards/mechwild/bde/lefty/info.json new file mode 100644 index 0000000000..1ada76e783 --- /dev/null +++ b/keyboards/mechwild/bde/lefty/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "MechWild BDE Lefty", + "url": "mechwild.com", + "maintainer": "kylemccreery", + "width": 14, + "height": 3, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"7", "x":0, "y":0}, {"label":"8", "x":1, "y":0}, {"label":"9", "x":2, "y":0}, {"label":"0", "x":3, "y":0}, {"label":"Q", "x":4, "y":0}, {"label":"W", "x":5, "y":0}, {"label":"E", "x":6, "y":0}, {"label":"R", "x":7, "y":0}, {"label":"T", "x":8, "y":0}, {"label":"Y", "x":9, "y":0}, {"label":"U", "x":10, "y":0}, {"label":"I", "x":11, "y":0}, {"label":"O", "x":12, "y":0}, {"label":"P", "x":13, "y":0}, + {"label":"4", "x":0, "y":1}, {"label":"5", "x":1, "y":1}, {"label":"6", "x":2, "y":1}, {"label":"Enter", "x":3, "y":1, "h":2}, {"label":"A", "x":4, "y":1}, {"label":"S", "x":5, "y":1}, {"label":"D", "x":6, "y":1}, {"label":"F", "x":7, "y":1}, {"label":"G", "x":8, "y":1}, {"label":"H", "x":9, "y":1}, {"label":"J", "x":10, "y":1}, {"label":"K", "x":11, "y":1}, {"label":"L", "x":12, "y":1}, {"label":"ESC", "x":13, "y":1}, + {"label":"1", "x":0, "y":2}, {"label":"2", "x":1, "y":2}, {"label":"3", "x":2, "y":2}, {"label":"Z", "x":4, "y":2}, {"label":"X", "x":5, "y":2}, {"label":"C", "x":6, "y":2}, {"label":"V", "x":7, "y":2}, {"label":"BS", "x":8, "y":2}, {"label":"", "x":9, "y":2}, {"label":"B", "x":10, "y":2}, {"label":"N", "x":11, "y":2}, {"label":"M", "x":12, "y":2}, {"label":"ENT", "x":13, "y":2} + ] + } + } +} diff --git a/keyboards/mechwild/bde/lefty/keymaps/default/config.h b/keyboards/mechwild/bde/lefty/keymaps/default/config.h new file mode 100644 index 0000000000..80e8e2e015 --- /dev/null +++ b/keyboards/mechwild/bde/lefty/keymaps/default/config.h @@ -0,0 +1,23 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +/* Making it so you need to hold the modifier and other key for the time together, helps not accidentally hit activate the hold functions of bottom row*/ +#define IGNORE_MOD_TAP_INTERRUPT + +/* Setting tap term, helps not accidentally hit activate the hold functions of bottom row*/ +#define TAPPING_TERM 250 + diff --git a/keyboards/mechwild/bde/lefty/keymaps/default/keymap.c b/keyboards/mechwild/bde/lefty/keymaps/default/keymap.c new file mode 100644 index 0000000000..3501a5e350 --- /dev/null +++ b/keyboards/mechwild/bde/lefty/keymaps/default/keymap.c @@ -0,0 +1,55 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include QMK_KEYBOARD_H + +#define FN1_SPC LT(1, KC_SPC) +#define FN2_BSPC LT(2, KC_BSPC) +#define FN3_B LT(3, KC_B) +#define CTL_Z CTL_T(KC_Z) +#define ALT_X ALT_T(KC_X) +#define ALT_N ALGR_T(KC_N) +#define CTL_M RCTL_T(KC_M) +#define SFT_ENT RSFT_T(KC_ENT) +#define WIN_C LGUI_T(KC_C) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_7, KC_8, KC_9, KC_0, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_4, KC_5, KC_6, SFT_ENT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ESC, + KC_1, KC_2, KC_3, CTL_Z, ALT_X, WIN_C, KC_V, FN2_BSPC, FN1_SPC, FN3_B, ALT_N, CTL_M, SFT_ENT + ), + + [1] = LAYOUT( + KC_F7, KC_F8, KC_F9, KC_F10, _______, _______, _______, RESET, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + KC_F4, KC_F5, KC_F6, KC_TAB, _______, _______, _______, _______, _______, KC_COMM, KC_DOT, KC_SLSH, KC_SCLN, KC_QUOT, + KC_F1, KC_F2, KC_F3, _______, _______, KC_LGUI, _______, KC_DEL, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LABK, KC_RABK, KC_QUES, KC_COLN, KC_DQUO, + KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_HOME, KC_PGDN, KC_PGUP, KC_END + ), + + [3] = LAYOUT( + RGB_M_G, RGB_M_T, _______, RGB_M_P, RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, _______, _______, _______, _______, _______, _______, + RGB_M_SN, RGB_M_K, RGB_M_X, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, RGB_RMOD, _______, _______, _______, _______, _______, _______, + RGB_M_B, RGB_M_R, RGB_M_SW, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) + +}; diff --git a/keyboards/mechwild/bde/lefty/keymaps/fancy/config.h b/keyboards/mechwild/bde/lefty/keymaps/fancy/config.h new file mode 100644 index 0000000000..8476c8ccd6 --- /dev/null +++ b/keyboards/mechwild/bde/lefty/keymaps/fancy/config.h @@ -0,0 +1,22 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +/* Making it so you need to hold the modifier and other key for the time together, helps not accidentally hit activate the hold functions of bottom row*/ +#define IGNORE_MOD_TAP_INTERRUPT + +/* Setting tap term, helps not accidentally hit activate the hold functions of bottom row*/ +#define TAPPING_TERM 250 diff --git a/keyboards/mechwild/bde/lefty/keymaps/fancy/keymap.c b/keyboards/mechwild/bde/lefty/keymaps/fancy/keymap.c new file mode 100644 index 0000000000..940575ce10 --- /dev/null +++ b/keyboards/mechwild/bde/lefty/keymaps/fancy/keymap.c @@ -0,0 +1,121 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include QMK_KEYBOARD_H + + +#define FN1_SPC LT(1, KC_SPC) +#define FN2_BSPC LT(2, KC_BSPC) +#define FN3_B LT(3, KC_B) +#define CTL_Z CTL_T(KC_Z) +#define ALT_X ALT_T(KC_X) +#define ALT_N ALGR_T(KC_N) +#define CTL_M RCTL_T(KC_M) +#define SFT_ENT RSFT_T(KC_ENT) +#define WIN_C LGUI_T(KC_C) + +typedef struct { + bool is_press_action; + uint8_t state; +} tap; + +enum { + SINGLE_TAP = 1, + SINGLE_HOLD, + DOUBLE_TAP +}; + +// Tap dance enums +enum { + left_enter, +}; + +uint8_t cur_dance(qk_tap_dance_state_t *state); +void left_enter_finished(qk_tap_dance_state_t *state, void *user_data); +void left_enter_reset(qk_tap_dance_state_t *state, void *user_data); + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_7, KC_8, KC_9, KC_0, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_4, KC_5, KC_6, TD(left_enter), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ESC, + KC_1, KC_2, KC_3, CTL_Z, ALT_X, WIN_C, KC_V, FN2_BSPC, FN1_SPC, FN3_B, ALT_N, CTL_M, SFT_ENT + ), + + [1] = LAYOUT( + KC_F7, KC_F8, KC_F9, KC_F10, _______, _______, _______, RESET, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + KC_F4, KC_F5, KC_F6, KC_TAB, _______, _______, _______, _______, _______, KC_COMM, KC_DOT, KC_SLSH, KC_SCLN, KC_QUOT, + KC_F1, KC_F2, KC_F3, _______, _______, KC_LGUI, _______, KC_DEL, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LABK, KC_RABK, KC_QUES, KC_COLN, KC_DQUO, + KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_HOME, KC_PGDN, KC_PGUP, KC_END + ), + +[3] = LAYOUT( + RGB_M_G, RGB_M_T, _______, RGB_M_P, RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, _______, _______, _______, _______, _______, _______, + RGB_M_SN, RGB_M_K, RGB_M_X, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, RGB_RMOD, _______, _______, _______, _______, _______, _______, + RGB_M_B, RGB_M_R, RGB_M_SW, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) + +}; + + +uint8_t cur_dance(qk_tap_dance_state_t *state) { + if (state->count == 1) { + if (state->interrupted || !state->pressed) return SINGLE_TAP; + // Key has not been interrupted, but the key is still held. Means you want to send a 'HOLD'. + else return SINGLE_HOLD; + } else return DOUBLE_TAP; + //} else if (state->count >= 2) { + // return DOUBLE_TAP; + //}else return 8; // Magic number. At some point this method will expand to work for more presses +} + +static tap left_enter_tap_state = { + .is_press_action = true, + .state = 0 +}; + +void left_enter_finished(qk_tap_dance_state_t *state, void *user_data) { + left_enter_tap_state.state = cur_dance(state); + switch (left_enter_tap_state.state) { + //case SINGLE_TAP: register_code(KC_ENT); break; + case SINGLE_HOLD: register_code(KC_LSFT); break; + case DOUBLE_TAP: register_code(KC_ENT); break; + } +} + +void left_enter_reset(qk_tap_dance_state_t *state, void *user_data) { + switch (left_enter_tap_state.state) { + //case SINGLE_TAP: unregister_code(KC_ENT); break; + case SINGLE_HOLD: unregister_code(KC_LSFT); break; + case DOUBLE_TAP: unregister_code(KC_ENT); break; + } + left_enter_tap_state.state = 0; +} + +qk_tap_dance_action_t tap_dance_actions[] = { + [left_enter] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, left_enter_finished, left_enter_reset) +}; + + + diff --git a/keyboards/mechwild/bde/lefty/keymaps/fancy/rules.mk b/keyboards/mechwild/bde/lefty/keymaps/fancy/rules.mk new file mode 100644 index 0000000000..9a56408f8e --- /dev/null +++ b/keyboards/mechwild/bde/lefty/keymaps/fancy/rules.mk @@ -0,0 +1,2 @@ +TAP_DANCE_ENABLE = yes + diff --git a/keyboards/mechwild/bde/lefty/keymaps/via/config.h b/keyboards/mechwild/bde/lefty/keymaps/via/config.h new file mode 100644 index 0000000000..8476c8ccd6 --- /dev/null +++ b/keyboards/mechwild/bde/lefty/keymaps/via/config.h @@ -0,0 +1,22 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +/* Making it so you need to hold the modifier and other key for the time together, helps not accidentally hit activate the hold functions of bottom row*/ +#define IGNORE_MOD_TAP_INTERRUPT + +/* Setting tap term, helps not accidentally hit activate the hold functions of bottom row*/ +#define TAPPING_TERM 250 diff --git a/keyboards/mechwild/bde/lefty/keymaps/via/keymap.c b/keyboards/mechwild/bde/lefty/keymaps/via/keymap.c new file mode 100644 index 0000000000..68ff334279 --- /dev/null +++ b/keyboards/mechwild/bde/lefty/keymaps/via/keymap.c @@ -0,0 +1,56 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include QMK_KEYBOARD_H + +#define FN1_SPC LT(1, KC_SPC) +#define FN2_BSPC LT(2, KC_BSPC) +#define FN3_B LT(3, KC_B) +#define CTL_Z CTL_T(KC_Z) +#define ALT_X ALT_T(KC_X) +#define ALT_N ALGR_T(KC_N) +#define CTL_M RCTL_T(KC_M) +#define SFT_ENT RSFT_T(KC_ENT) +#define WIN_C LGUI_T(KC_C) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_7, KC_8, KC_9, KC_0, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_4, KC_5, KC_6, SFT_ENT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ESC, + KC_1, KC_2, KC_3, CTL_Z, ALT_X, WIN_C, KC_V, FN2_BSPC, FN1_SPC, FN3_B, ALT_N, CTL_M, SFT_ENT + ), + + [1] = LAYOUT( + KC_F7, KC_F8, KC_F9, KC_F10, _______, _______, _______, RESET, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + KC_F4, KC_F5, KC_F6, KC_TAB, _______, _______, _______, _______, _______, KC_COMM, KC_DOT, KC_SLSH, KC_SCLN, KC_QUOT, + KC_F1, KC_F2, KC_F3, _______, _______, KC_LGUI, _______, KC_DEL, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LABK, KC_RABK, KC_QUES, KC_COLN, KC_DQUO, + KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_HOME, KC_PGDN, KC_PGUP, KC_END + ), + + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) + +}; diff --git a/keyboards/mechwild/bde/lefty/keymaps/via/rules.mk b/keyboards/mechwild/bde/lefty/keymaps/via/rules.mk new file mode 100644 index 0000000000..16d33cd89f --- /dev/null +++ b/keyboards/mechwild/bde/lefty/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes + diff --git a/keyboards/mechwild/bde/lefty/lefty.c b/keyboards/mechwild/bde/lefty/lefty.c new file mode 100644 index 0000000000..77286f5af3 --- /dev/null +++ b/keyboards/mechwild/bde/lefty/lefty.c @@ -0,0 +1,18 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include "lefty.h" diff --git a/keyboards/mechwild/bde/lefty/lefty.h b/keyboards/mechwild/bde/lefty/lefty.h new file mode 100644 index 0000000000..37b8771db6 --- /dev/null +++ b/keyboards/mechwild/bde/lefty/lefty.h @@ -0,0 +1,30 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D , \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D , \ + K20, K21, K22, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D \ +) { \ + {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D}, \ + {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D}, \ + {K20, K21, K22, KC_NO, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D} \ +} diff --git a/keyboards/mechwild/bde/lefty/readme.md b/keyboards/mechwild/bde/lefty/readme.md new file mode 100644 index 0000000000..88e7be0202 --- /dev/null +++ b/keyboards/mechwild/bde/lefty/readme.md @@ -0,0 +1,15 @@ +# BIG DILL EXTENDED + + + +A 41 key keyboard. + +* Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery) +* Hardware Supported: BDE v2.3 Lefty +* Hardware Availability: [BIG DILL EXTENDED on MechWild](https://mechwild.com/product/big-dill-extended-bde/) + +Make example for this keyboard (after setting up your build environment): + + make mechwild/bde/lefty:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechwild/bde/lefty/rules.mk b/keyboards/mechwild/bde/lefty/rules.mk new file mode 100644 index 0000000000..f4aec9cf5f --- /dev/null +++ b/keyboards/mechwild/bde/lefty/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + diff --git a/keyboards/mechwild/bde/righty/config.h b/keyboards/mechwild/bde/righty/config.h new file mode 100644 index 0000000000..5f8537f9cd --- /dev/null +++ b/keyboards/mechwild/bde/righty/config.h @@ -0,0 +1,55 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6D77 // mw = "MechWild" +#define PRODUCT_ID 0x1702 +#define DEVICE_VER 0x0203 +#define MANUFACTURER MechWild +#define PRODUCT BDE Righty +#define DESCRIPTION 41-key ortholinear 30% with numpad + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 14 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D1, D7, D3} +#define MATRIX_COL_PINS { B4, B5, E6, C6, D4, D0, F4, F5, F6, B6, B3, B2, B1, F7} +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* If RGBLIGHT_ENABLE is set to yes in the rules, ensure the RGBLED_NUM is accurate for how many you have attached. */ +#define RGB_DI_PIN D2 +#define RGBLED_NUM 16 +#define RGBLIGHT_ANIMATIONS + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + diff --git a/keyboards/mechwild/bde/righty/info.json b/keyboards/mechwild/bde/righty/info.json new file mode 100644 index 0000000000..8f4c879499 --- /dev/null +++ b/keyboards/mechwild/bde/righty/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "MechWild BDE Righty", + "url": "mechwild.com", + "maintainer": "kylemccreery", + "width": 14, + "height": 3, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"Y", "x":5, "y":0}, {"label":"U", "x":6, "y":0}, {"label":"I", "x":7, "y":0}, {"label":"O", "x":8, "y":0}, {"label":"P", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"7", "x":11, "y":0}, {"label":"8", "x":12, "y":0}, {"label":"9", "x":13, "y":0}, + {"label":"A", "x":0, "y":1}, {"label":"S", "x":1, "y":1}, {"label":"D", "x":2, "y":1}, {"label":"F", "x":3, "y":1}, {"label":"G", "x":4, "y":1}, {"label":"H", "x":5, "y":1}, {"label":"J", "x":6, "y":1}, {"label":"K", "x":7, "y":1}, {"label":"L", "x":8, "y":1}, {"label":"ESC", "x":9, "y":1}, {"label":"Enter", "x":10, "y":1, "h":2}, {"label":"4", "x":11, "y":1}, {"label":"5", "x":12, "y":1}, {"label":"6", "x":13, "y":1}, + {"label":"Z", "x":0, "y":2}, {"label":"X", "x":1, "y":2}, {"label":"C", "x":2, "y":2}, {"label":"V", "x":3, "y":2}, {"label":"BS", "x":4, "y":2}, {"label":"", "x":5, "y":2}, {"label":"B", "x":6, "y":2}, {"label":"N", "x":7, "y":2}, {"label":"M", "x":8, "y":2}, {"label":"ENT", "x":9, "y":2}, {"label":"1", "x":11, "y":2}, {"label":"2", "x":12, "y":2}, {"label":"3", "x":13, "y":2} + ] + } + } +}
\ No newline at end of file diff --git a/keyboards/mechwild/bde/righty/keymaps/default/config.h b/keyboards/mechwild/bde/righty/keymaps/default/config.h new file mode 100644 index 0000000000..80e8e2e015 --- /dev/null +++ b/keyboards/mechwild/bde/righty/keymaps/default/config.h @@ -0,0 +1,23 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +/* Making it so you need to hold the modifier and other key for the time together, helps not accidentally hit activate the hold functions of bottom row*/ +#define IGNORE_MOD_TAP_INTERRUPT + +/* Setting tap term, helps not accidentally hit activate the hold functions of bottom row*/ +#define TAPPING_TERM 250 + diff --git a/keyboards/mechwild/bde/righty/keymaps/default/keymap.c b/keyboards/mechwild/bde/righty/keymaps/default/keymap.c new file mode 100644 index 0000000000..5310cea051 --- /dev/null +++ b/keyboards/mechwild/bde/righty/keymaps/default/keymap.c @@ -0,0 +1,55 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include QMK_KEYBOARD_H + +#define FN1_SPC LT(1, KC_SPC) +#define FN2_BSPC LT(2, KC_BSPC) +#define FN3_B LT(3, KC_B) +#define CTL_Z CTL_T(KC_Z) +#define ALT_X ALT_T(KC_X) +#define ALT_N ALGR_T(KC_N) +#define CTL_M RCTL_T(KC_M) +#define WIN_C LGUI_T(KC_C) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_0, KC_7, KC_8, KC_9, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ESC, KC_ENT, KC_4, KC_5, KC_6, + CTL_Z, ALT_X, WIN_C, KC_V, FN2_BSPC, FN1_SPC, FN3_B, ALT_N, CTL_M, KC_RSFT, KC_1, KC_2, KC_3 + ), + + [1] = LAYOUT( + _______, _______, _______, RESET, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_F10, KC_F7, KC_F8, KC_F9, + _______, _______, _______, _______, _______, KC_COMM, KC_DOT, KC_SLSH, KC_SCLN, KC_QUOT, KC_TAB, KC_F4, KC_F5, KC_F6, + _______, _______, KC_LGUI, _______, KC_DEL, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_F1, KC_F2, KC_F3 + ), + + [2] = LAYOUT( + _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, _______, _______, _______, _______, + _______, _______, _______, _______, _______, KC_LABK, KC_RABK, KC_QUES, KC_COLN, KC_DQUO, _______, _______, _______, _______, + _______, _______, _______, _______, _______, KC_PSCR, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_F11, KC_F12, _______ + ), + + [3] = LAYOUT( + RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, _______, _______, _______, _______, _______, _______, RGB_M_P, RGB_M_G, RGB_M_T, _______, + RGB_HUD, RGB_SAD, RGB_VAD, RGB_RMOD, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_M_SN, RGB_M_K, RGB_M_X, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_M_B, RGB_M_R, RGB_M_SW + ) + +}; diff --git a/keyboards/mechwild/bde/righty/keymaps/via/config.h b/keyboards/mechwild/bde/righty/keymaps/via/config.h new file mode 100644 index 0000000000..80e8e2e015 --- /dev/null +++ b/keyboards/mechwild/bde/righty/keymaps/via/config.h @@ -0,0 +1,23 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +/* Making it so you need to hold the modifier and other key for the time together, helps not accidentally hit activate the hold functions of bottom row*/ +#define IGNORE_MOD_TAP_INTERRUPT + +/* Setting tap term, helps not accidentally hit activate the hold functions of bottom row*/ +#define TAPPING_TERM 250 + diff --git a/keyboards/mechwild/bde/righty/keymaps/via/keymap.c b/keyboards/mechwild/bde/righty/keymaps/via/keymap.c new file mode 100644 index 0000000000..5310cea051 --- /dev/null +++ b/keyboards/mechwild/bde/righty/keymaps/via/keymap.c @@ -0,0 +1,55 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include QMK_KEYBOARD_H + +#define FN1_SPC LT(1, KC_SPC) +#define FN2_BSPC LT(2, KC_BSPC) +#define FN3_B LT(3, KC_B) +#define CTL_Z CTL_T(KC_Z) +#define ALT_X ALT_T(KC_X) +#define ALT_N ALGR_T(KC_N) +#define CTL_M RCTL_T(KC_M) +#define WIN_C LGUI_T(KC_C) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_0, KC_7, KC_8, KC_9, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ESC, KC_ENT, KC_4, KC_5, KC_6, + CTL_Z, ALT_X, WIN_C, KC_V, FN2_BSPC, FN1_SPC, FN3_B, ALT_N, CTL_M, KC_RSFT, KC_1, KC_2, KC_3 + ), + + [1] = LAYOUT( + _______, _______, _______, RESET, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_F10, KC_F7, KC_F8, KC_F9, + _______, _______, _______, _______, _______, KC_COMM, KC_DOT, KC_SLSH, KC_SCLN, KC_QUOT, KC_TAB, KC_F4, KC_F5, KC_F6, + _______, _______, KC_LGUI, _______, KC_DEL, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_F1, KC_F2, KC_F3 + ), + + [2] = LAYOUT( + _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, _______, _______, _______, _______, + _______, _______, _______, _______, _______, KC_LABK, KC_RABK, KC_QUES, KC_COLN, KC_DQUO, _______, _______, _______, _______, + _______, _______, _______, _______, _______, KC_PSCR, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_F11, KC_F12, _______ + ), + + [3] = LAYOUT( + RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, _______, _______, _______, _______, _______, _______, RGB_M_P, RGB_M_G, RGB_M_T, _______, + RGB_HUD, RGB_SAD, RGB_VAD, RGB_RMOD, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_M_SN, RGB_M_K, RGB_M_X, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_M_B, RGB_M_R, RGB_M_SW + ) + +}; diff --git a/keyboards/mechwild/bde/righty/keymaps/via/rules.mk b/keyboards/mechwild/bde/righty/keymaps/via/rules.mk new file mode 100644 index 0000000000..16d33cd89f --- /dev/null +++ b/keyboards/mechwild/bde/righty/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes + diff --git a/keyboards/mechwild/bde/righty/readme.md b/keyboards/mechwild/bde/righty/readme.md new file mode 100644 index 0000000000..619ea61f00 --- /dev/null +++ b/keyboards/mechwild/bde/righty/readme.md @@ -0,0 +1,15 @@ +# BIG DILL EXTENDED + + + +A 41 key keyboard. + +* Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery) +* Hardware Supported: BDE v2.3 Righty +* Hardware Availability: [BIG DILL EXTENDED on MechWild](https://mechwild.com/product/big-dill-extended-bde/) + +Make example for this keyboard (after setting up your build environment): + + make mechwild/bde/righty:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechwild/bde/righty/righty.c b/keyboards/mechwild/bde/righty/righty.c new file mode 100644 index 0000000000..d285e2e559 --- /dev/null +++ b/keyboards/mechwild/bde/righty/righty.c @@ -0,0 +1,18 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include "righty.h" diff --git a/keyboards/mechwild/bde/righty/righty.h b/keyboards/mechwild/bde/righty/righty.h new file mode 100644 index 0000000000..f1f29554a1 --- /dev/null +++ b/keyboards/mechwild/bde/righty/righty.h @@ -0,0 +1,30 @@ +/* Copyright 2020 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D , \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D , \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2B, K2C, K2D \ +) { \ + {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D}, \ + {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D}, \ + {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_NO, K2B, K2C, K2D} \ +} diff --git a/keyboards/mechwild/bde/righty/rules.mk b/keyboards/mechwild/bde/righty/rules.mk new file mode 100644 index 0000000000..f4aec9cf5f --- /dev/null +++ b/keyboards/mechwild/bde/righty/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + diff --git a/keyboards/mt84/info.json b/keyboards/mt84/info.json index 32b3ca4ab3..f9486253ca 100644 --- a/keyboards/mt84/info.json +++ b/keyboards/mt84/info.json @@ -1,12 +1,12 @@ -{
- "keyboard_name": "mt84",
- "url": "",
- "maintainer": "qmk",
- "width": 16,
- "height": 6,
- "layouts": {
- "LAYOUT_75_ansi": {
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
- }
- }
-}
+{ + "keyboard_name": "mt84", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 6, + "layouts": { + "LAYOUT_75_ansi": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}] + } + } +} diff --git a/keyboards/mt84/readme.md b/keyboards/mt84/readme.md index d57996f952..17e1de2f5c 100644 --- a/keyboards/mt84/readme.md +++ b/keyboards/mt84/readme.md @@ -1,23 +1,23 @@ -# Mt84rgb
-
-
-
-A 84% keyboard PCB made by MT.
-It supports standard 84-key layout, with hotswap sockets and per-key RGB backlight.
-
-
-* Keyboard Maintainer: [MT](https://github.com/704340378)
-* Hardware Supported: mt84rgb (atmega32u4)
-* Hardware Availability: [麦田外设](https://shop110310565.taobao.com)
-
-Make example for this keyboard (after setting up your build environment):
-
- make mt84:default
-
-Flashing example for this keyboard:
-
- make mt84:default:flash
-
-To put the board into bootloader mode, either press the reset button on the bottom the PCB or hold Space+B while plugging it in.
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+# Mt84rgb + + + +A 84% keyboard PCB made by MT. +It supports standard 84-key layout, with hotswap sockets and per-key RGB backlight. + + +* Keyboard Maintainer: [MT](https://github.com/704340378) +* Hardware Supported: mt84rgb (atmega32u4) +* Hardware Availability: [麦田外设](https://shop110310565.taobao.com) + +Make example for this keyboard (after setting up your build environment): + + make mt84:default + +Flashing example for this keyboard: + + make mt84:default:flash + +To put the board into bootloader mode, either press the reset button on the bottom the PCB or hold Space+B while plugging it in. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/nullbitsco/nibble/keymaps/oled/rules.mk b/keyboards/nullbitsco/nibble/keymaps/oled/rules.mk index cf4068471f..48a51b2250 100644 --- a/keyboards/nullbitsco/nibble/keymaps/oled/rules.mk +++ b/keyboards/nullbitsco/nibble/keymaps/oled/rules.mk @@ -1 +1 @@ -ENABLE_OLED_DRIVER = yes
\ No newline at end of file +OLED_DRIVER_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/planck/readme.md b/keyboards/planck/readme.md index 0d836563c4..748c251478 100644 --- a/keyboards/planck/readme.md +++ b/keyboards/planck/readme.md @@ -7,7 +7,7 @@ A compact 40% (12x4) ortholinear keyboard kit made and sold by OLKB and Massdrop Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert) Hardware Supported: Planck PCB rev1, rev2, rev3, rev4, rev5, rev6; Planck Light, Planck EZ -Hardware Availability: [OLKB.com](https://olkb.com), [Massdrop](https://www.massdrop.com/buy/planck-mechanical-keyboard?mode=guest_open) +Hardware Availability: [OLKB.com](https://olkb.com), [Massdrop](https://www.massdrop.com/buy/planck-mechanical-keyboard?mode=guest_open), [Ergodox (Planck EZ)](https://ergodox-ez.com/pages/planck) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/slz40/config.h b/keyboards/slz40/config.h new file mode 100644 index 0000000000..cc868e4c0c --- /dev/null +++ b/keyboards/slz40/config.h @@ -0,0 +1,146 @@ +/* +Copyright 2020 SithLord + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SithLord +#define PRODUCT slz40 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B4, B5, B3, B2, B6 } +#define MATRIX_COL_PINS { F4, D2, F5, D1, F6, D0, F7, D4, B1, C6, E6, D7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/slz40/info.json b/keyboards/slz40/info.json new file mode 100644 index 0000000000..2723453c4e --- /dev/null +++ b/keyboards/slz40/info.json @@ -0,0 +1,76 @@ +{ + "keyboard_name": "slz40", + "url": "https://github.com/sithlord121/slz40", + "maintainer": "SithLord", + "width": 13, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "1", "x": 0.5, "y": 0}, + {"label": "2", "x": 1.5, "y": 0}, + {"label": "3", "x": 2.5, "y": 0}, + {"label": "4", "x": 3.5, "y": 0}, + {"label": "5", "x": 4.5, "y": 0}, + {"label": "6", "x": 5.5, "y": 0}, + {"label": "7", "x": 6.5, "y": 0}, + {"label": "8", "x": 7.5, "y": 0}, + {"label": "9", "x": 8.5, "y": 0}, + {"label": "0", "x": 9.5, "y": 0}, + {"label": "-", "x": 10.5, "y": 0}, + + {"label": "esc", "x": 0, "y": 1}, + {"label": "q", "x": 1, "y": 1}, + {"label": "w", "x": 2, "y": 1}, + {"label": "e", "x": 3, "y": 1}, + {"label": "r", "x": 4, "y": 1}, + {"label": "t", "x": 5, "y": 1}, + {"label": "y", "x": 6, "y": 1}, + {"label": "u", "x": 7, "y": 1}, + {"label": "i", "x": 8, "y": 1}, + {"label": "o", "x": 9, "y": 1}, + {"label": "p", "x": 10, "y": 1}, + {"label": "/", "x": 11, "y": 1}, + {"label": "bs", "x": 12, "y": 1}, + + {"label": "tab", "x": 0, "y": 2, "w": 1.25}, + {"label": "a", "x": 1.25, "y": 2}, + {"label": "s", "x": 2.25, "y": 2}, + {"label": "d", "x": 3.25, "y": 2}, + {"label": "f", "x": 4.25, "y": 2}, + {"label": "g", "x": 5.25, "y": 2}, + {"label": "h", "x": 6.25, "y": 2}, + {"label": "j", "x": 7.25, "y": 2}, + {"label": "k", "x": 8.25, "y": 2}, + {"label": "l", "x": 9.25, "y": 2}, + {"label": ";", "x": 10.25, "y": 2}, + {"label": "enter", "x": 11.25, "y": 2, "w": 1.75}, + + {"label": "lshift", "x": 0, "y": 3, "w": 1.75}, + {"label": "z", "x": 1.75, "y": 3}, + {"label": "x", "x": 2.75, "y": 3}, + {"label": "c", "x": 3.75, "y": 3}, + {"label": "v", "x": 4.75, "y": 3}, + {"label": "b", "x": 5.75, "y": 3}, + {"label": "n", "x": 6.75, "y": 3}, + {"label": "m", "x": 7.75, "y": 3}, + {"label": ",", "x": 8.75, "y": 3}, + {"label": ".", "x": 9.75, "y": 3}, + {"label": "up", "x": 10.75, "y": 3}, + {"label": "rshift", "x": 11.75, "y": 3, "w": 1.25}, + + {"label": "ctrl", "x": 0, "y": 4, "w": 1.25}, + {"label": "qui", "x": 1.25, "y": 4, "w": 1.25}, + {"label": "alt", "x": 2.50, "y": 4, "w": 1.25}, + {"label": "del", "x": 3.75, "y": 4, "w": 1.25}, + {"label": "enter", "x": 5, "y": 4, "w": 1.75}, + {"label": "space", "x": 6.75, "y": 4, "w": 1.75}, + {"label": "'", "x": 8.50, "y": 4, "w": 1.5}, + {"label": "left", "x": 10, "y": 4}, + {"label": "down", "x": 11, "y": 4}, + {"label": "right", "x": 12, "y": 4} + + ] + } + } +} diff --git a/keyboards/slz40/keymaps/default/keymap.c b/keyboards/slz40/keymaps/default/keymap.c new file mode 100644 index 0000000000..9212d792e8 --- /dev/null +++ b/keyboards/slz40/keymaps/default/keymap.c @@ -0,0 +1,48 @@ +/* Copyright 2020 SithLord + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_SLSH, KC_BSPC, + LT(_FN, KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(_FN,KC_ENT), + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_RSPC, + KC_LCTL, KC_LGUI, KC_LALT, LT(_FN2, KC_DEL), LT(_FN2, KC_ENTER), KC_SPACE, KC_QUOT, KC_LEFT, KC_DOWN, KC_RIGHT + ), + [_FN] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_SLSH, KC_BSPC, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_PIPE, KC_MINS, KC_EQL, KC_NO, KC_BSLS, KC_TRNS, + KC_LSFT, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_LBRC, KC_RBRC, KC_COMM, KC_DOT, KC_PGUP, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_TRNS, KC_SPACE, KC_QUOT, KC_HOME, KC_PGDN, KC_END + ), + [_FN2] = LAYOUT( + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, RESET, + KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, KC_BSPC, + KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BSLS, KC_UNDS, KC_PLUS, KC_NO, KC_NO, KC_ENT, + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LCBR, KC_RCBR, KC_COMM, KC_DOT, KC_VOLU, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_TRNS, KC_SPACE, KC_QUOT, KC_HOME, KC_VOLD, KC_END + ) +}; diff --git a/keyboards/slz40/keymaps/default/readme.md b/keyboards/slz40/keymaps/default/readme.md new file mode 100644 index 0000000000..e9b38ab415 --- /dev/null +++ b/keyboards/slz40/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for slz40 diff --git a/keyboards/slz40/readme.md b/keyboards/slz40/readme.md new file mode 100644 index 0000000000..d710f597f9 --- /dev/null +++ b/keyboards/slz40/readme.md @@ -0,0 +1,19 @@ +# slz40 + + + +PCB and keymap files for the SLZ40, a 40s style keyboard with numbers for Zhuyin input. + +* Keyboard Maintainer: [SithLord](https://github.com/sithlord121/slz40) +* Hardware Supported: ProMicro or similar controller is required. +* Hardware Availability: PCB files can be found at https://github.com/sithlord121/slz40 + +Make example for this keyboard (after setting up your build environment): + + make slz40:default + +Flashing example for this keyboard: + + make slz40:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/slz40/rules.mk b/keyboards/slz40/rules.mk new file mode 100644 index 0000000000..5c0d8f307c --- /dev/null +++ b/keyboards/slz40/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/slz40/slz40.c b/keyboards/slz40/slz40.c new file mode 100644 index 0000000000..261b0bd892 --- /dev/null +++ b/keyboards/slz40/slz40.c @@ -0,0 +1,17 @@ +/* Copyright 2020 SithLord + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "slz40.h" diff --git a/keyboards/slz40/slz40.h b/keyboards/slz40/slz40.h new file mode 100644 index 0000000000..88e7178c62 --- /dev/null +++ b/keyboards/slz40/slz40.h @@ -0,0 +1,41 @@ +/* Copyright 2020 SithLord + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k0b, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k46, k48, k49, k4a, k4b \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b }, \ + { k40, k41, k42, k43, k44, KC_NO, k46, KC_NO, k48, k49, k4a, k4b } \ +} diff --git a/keyboards/taleguers/taleguers75/info.json b/keyboards/taleguers/taleguers75/info.json index 824bb8c9d7..634a96b661 100644 --- a/keyboards/taleguers/taleguers75/info.json +++ b/keyboards/taleguers/taleguers75/info.json @@ -72,6 +72,11 @@ "y": 0 }, { + "label": "Del", + "x": 15.5, + "y": 2.25 + }, + { "label": "~", "x": 0, "y": 1.25 @@ -215,11 +220,6 @@ "w": 1.5 }, { - "label": "Del", - "x": 15.5, - "y": 2.25 - }, - { "label": "Caps Lock", "x": 0, "y": 3.25, @@ -364,11 +364,6 @@ "y": 4.25 }, { - "label": "\u2191", - "x": 14.25, - "y": 4.5 - }, - { "label": "Ctrl", "x": 0, "y": 5.25, @@ -412,6 +407,11 @@ "y": 5.5 }, { + "label": "\u2191", + "x": 14.25, + "y": 4.5 + }, + { "label": "\u2193", "x": 14.25, "y": 5.5 diff --git a/users/stanrc85/config.h b/users/stanrc85/config.h index 71b915e488..ae0a66ae67 100644 --- a/users/stanrc85/config.h +++ b/users/stanrc85/config.h @@ -7,3 +7,9 @@ #define RGBLIGHT_LAYERS #define RGBLIGHT_SLEEP #endif + +#ifdef KEYBOARD_sneakbox_aliceclone + #define INDICATOR_PIN_0 D7 + #define INDICATOR_PIN_1 D6 + #define INDICATOR_PIN_2 D4 +#endif diff --git a/users/stanrc85/indicator_layers_sneakbox.c b/users/stanrc85/indicator_layers_sneakbox.c new file mode 100644 index 0000000000..8aa1a41e49 --- /dev/null +++ b/users/stanrc85/indicator_layers_sneakbox.c @@ -0,0 +1,28 @@ + /* Copyright 2020 Stanrc85 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "stanrc85.h" + +layer_state_t layer_state_set_user(layer_state_t state) { + writePin(INDICATOR_PIN_2, layer_state_cmp(state, _FN2_60) || layer_state_cmp(state, _DEFAULT)); + writePin(INDICATOR_PIN_1, layer_state_cmp(state, _FN1_60) || layer_state_cmp(state, _DEFAULT)); + return state; +} + +bool led_update_user(led_t led_state) { + writePin(INDICATOR_PIN_0, led_state.caps_lock); + return false; +}
\ No newline at end of file diff --git a/users/stanrc85/rules.mk b/users/stanrc85/rules.mk index 54f0f76260..fc2560d3a1 100644 --- a/users/stanrc85/rules.mk +++ b/users/stanrc85/rules.mk @@ -18,6 +18,14 @@ ifeq ($(strip $(KEYBOARD)), projectkb/alice/rev2) LTO_ENABLE = no VELOCIKEY_ENABLE=yes endif +ifeq ($(strip $(KEYBOARD)), sneakbox/aliceclone) + SRC += indicator_layers_sneakbox.c + #SRC += startup_fanfare.c + OPT_DEFS += -DHAS_INDICATORS + OPT_DEFS += -DHAS_ROTARY + VIA_ENABLE = yes + LTO_ENABLE = no +endif ifeq ($(strip $(KEYBOARD)), tkc/osav2) SRC += rgblight_layers_osa.c VIA_ENABLE = yes diff --git a/users/stanrc85/stanrc85.c b/users/stanrc85/stanrc85.c index 2dbd41974b..8bc52b0ffd 100644 --- a/users/stanrc85/stanrc85.c +++ b/users/stanrc85/stanrc85.c @@ -44,6 +44,18 @@ void ctl_copy_reset (qk_tap_dance_state_t *state, void *user_data) { } } +#if defined(HAS_ROTARY) + void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_VOLD); + } else { + tap_code(KC_VOLU); + } + } + } +#endif + #if defined(HAS_INDICATORS) static uint8_t led_user = 0; #endif @@ -55,6 +67,9 @@ void lock_unlock (qk_tap_dance_state_t *state, void *user_data) { tap_code16(KC_CAD); #if defined(HAS_INDICATORS) led_user = 0; + #if defined(KEYBOARD_sneakbox_aliceclone) + led_user = 1; + #endif writePin(INDICATOR_PIN_0, !led_user); wait_ms(200); writePin(INDICATOR_PIN_1, !led_user); @@ -68,6 +83,9 @@ void lock_unlock (qk_tap_dance_state_t *state, void *user_data) { tap_code16(KC_LOCK); #if defined(HAS_INDICATORS) led_user = 1; + #if defined(KEYBOARD_sneakbox_aliceclone) + led_user = 0; + #endif writePin(INDICATOR_PIN_2, !led_user); wait_ms(200); writePin(INDICATOR_PIN_1, !led_user); |