diff options
| -rw-r--r-- | docs/faq_build.md | 4 | ||||
| -rw-r--r-- | docs/faq_debug.md | 68 | ||||
| -rw-r--r-- | docs/faq_keymap.md | 63 | ||||
| -rw-r--r-- | docs/fr-fr/faq_build.md | 4 | ||||
| -rw-r--r-- | docs/fr-fr/faq_debug.md | 71 | ||||
| -rw-r--r-- | docs/fr-fr/faq_keymap.md | 67 | ||||
| -rw-r--r-- | docs/zh-cn/faq_build.md | 5 | ||||
| -rw-r--r-- | docs/zh-cn/faq_debug.md | 68 | ||||
| -rw-r--r-- | docs/zh-cn/faq_keymap.md | 63 |
9 files changed, 3 insertions, 410 deletions
diff --git a/docs/faq_build.md b/docs/faq_build.md index 4c91cb28b1..b2e448306a 100644 --- a/docs/faq_build.md +++ b/docs/faq_build.md @@ -87,10 +87,6 @@ Re-running the QMK installation script (`./util/qmk_install.sh` from the `qmk_fi If that doesn't work, then you may need to download and run Zadig. See [Bootloader Driver Installation with Zadig](driver_installation_zadig.md) for more detailed information. -## WINAVR is Obsolete -It is no longer recommended and may cause some problem. -See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99). - ## USB VID and PID You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product. diff --git a/docs/faq_debug.md b/docs/faq_debug.md index 1e0cdc82bf..6c66defbd4 100644 --- a/docs/faq_debug.md +++ b/docs/faq_debug.md @@ -112,56 +112,6 @@ In C `1` means one of [int] type which is [16 bit] in case of AVR so you can't s http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 - -## Bootloader Jump Doesn't Work -Properly configure bootloader size in **Makefile**. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**. -``` -# Size of Bootloaders in bytes: -# Atmel DFU loader(ATmega32U4) 4096 -# Atmel DFU loader(AT90USB128) 8192 -# LUFA bootloader(ATmega32U4) 4096 -# Arduino Caterina(ATmega32U4) 4096 -# USBaspLoader(ATmega***) 2048 -# Teensy halfKay(ATmega32U4) 512 -# Teensy++ halfKay(AT90USB128) 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 -``` -AVR Boot section size are defined by setting **BOOTSZ** fuse in fact. Consult with your MCU datasheet. -Note that **Word**(2 bytes) size and address are used in datasheet while TMK uses **Byte**. - -AVR Boot section is located at end of Flash memory like the followings. -``` -byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286) -0x0000 +---------------+ 0x00000 +---------------+ - | | | | - | | | | - | Application | | Application | - | | | | - = = = = - | | 32KB-4KB | | 128KB-8KB -0x6000 +---------------+ 0x1E000 +---------------+ - | Bootloader | 4KB | Bootloader | 8KB -0x7FFF +---------------+ 0x1FFFF +---------------+ - - -byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286) -0x0000 +---------------+ 0x00000 +---------------+ - | | | | - | | | | - | Application | | Application | - | | | | - = = = = - | | 32KB-512B | | 128KB-2KB -0x7E00 +---------------+ 0x1FC00 +---------------+ - | Bootloader | 512B | Bootloader | 2KB -0x7FFF +---------------+ 0x1FFFF +---------------+ -``` - -And see this discussion for further reference. -https://github.com/tmk/tmk_keyboard/issues/179 - -If you are using a TeensyUSB, there is a [known bug](https://github.com/qmk/qmk_firmware/issues/164) in which the hardware reset button prevents the RESET key from working. Unplugging the keyboard and plugging it back in should resolve the problem. - ## Special Extra Key Doesn't Work (System, Audio Control Keys) You need to define `EXTRAKEY_ENABLE` in `rules.mk` to use them in QMK. @@ -194,24 +144,6 @@ If you would like to keep JTAG enabled, just add the following to your `config.h #define NO_JTAG_DISABLE ``` -## Adding LED Indicators of Lock Keys -You need your own LED indicators for CapsLock, ScrollLock and NumLock? See this post. - -http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560 - -## Program Arduino Micro/Leonardo -Push reset button and then run command like this within 8 seconds. - -``` -avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0 -``` - -Device name will vary depending on your system. - -http://arduino.cc/en/Main/ArduinoBoardMicro -https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867 - - ## USB 3 Compatibility I heard some people have a problem with USB 3 port, try USB 2 port. diff --git a/docs/faq_keymap.md b/docs/faq_keymap.md index 84d8548d46..2d00e8bef9 100644 --- a/docs/faq_keymap.md +++ b/docs/faq_keymap.md @@ -67,24 +67,8 @@ After enabling this feature use keycodes `KC_LCAP`, `KC_LNUM` and `KC_LSCR` in y Old vintage mechanical keyboards occasionally have lock switches but modern ones don't have. ***You don't need this feature in most case and just use keycodes `KC_CAPS`, `KC_NLCK` and `KC_SLCK`.*** ## Input Special Characters Other Than ASCII like Cédille 'Ç' -NO UNIVERSAL METHOD TO INPUT THOSE WORKS OVER ALL SYSTEMS. You have to define **MACRO** in way specific to your OS or layout. -See this post for example **MACRO** code. - -http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620 - -On **Windows** you can use `AltGr` key or **Alt code**. -* http://en.wikipedia.org/wiki/AltGr_key -* http://en.wikipedia.org/wiki/Alt_code - -On **Mac** OS defines `Option` key combinations. -* http://en.wikipedia.org/wiki/Option_key#Alternative_keyboard_input - -On **Xorg** you can use `compose` key, instead. -* http://en.wikipedia.org/wiki/Compose_key - -And see this for **Unicode** input. -* http://en.wikipedia.org/wiki/Unicode_input +See the [Unicode](feature_unicode.md) feature. ## `Fn` Key on macOS @@ -130,51 +114,6 @@ https://github.com/tekezo/Karabiner/issues/403 See the [Grave Escape](feature_grave_esc.md) feature. -## Arrow on Right Modifier Keys with Dual-Role -This turns right modifier keys into arrow keys when the keys are tapped while still modifiers when the keys are hold. In TMK the dual-role function is dubbed **TAP**. -``` - -#include "keymap_common.h" - - -/* Arrow keys on right modifier keys with TMK dual role feature - * - * https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role - * https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys - */ -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: qwerty */ - [0] = LAYOUT( \ - ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS,BSPC, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ - LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ - LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, ESC, \ - FN4, LGUI,LALT, SPC, APP, FN2, FN1, FN3), - [1] = LAYOUT( \ - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \ - TRNS,TRNS,TRNS, TRNS, TRNS,FN7, FN6, FN8), -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP), - [1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN), - [2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT), - [3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT), - [4] = ACTION_LAYER_MOMENTARY(1), - [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP), - [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN), - [7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME), - [8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END), -}; - -``` - -Dual-role key: https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys - - ## Eject on Mac OSX `KC_EJCT` keycode works on OSX. https://github.com/tmk/tmk_keyboard/issues/250 It seems Windows 10 ignores the code and Linux/Xorg recognizes but has no mapping by default. diff --git a/docs/fr-fr/faq_build.md b/docs/fr-fr/faq_build.md index 6fba1e4304..448ff01aab 100644 --- a/docs/fr-fr/faq_build.md +++ b/docs/fr-fr/faq_build.md @@ -86,10 +86,6 @@ Relancer le script d'installation de QMK (`./util/qmk_install.sh` situé dans r Si vous rencontrez toujours des problèmes, essayez de télécharger et lancer Zadig. Voir [Installation du driver du bootloader avec Zadig](driver_installation_zadig.md) pour plus d'informations. -## WINAVR est obsolète - -Il n'est plus recommandé et peut causer des problèmes. Voir [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99). - ## USB VID et PID Vous pouvez utiliser l'ID de votre choix en modifier `config.h`. Il y a peu de chance de conflit avec d'autres produits. diff --git a/docs/fr-fr/faq_debug.md b/docs/fr-fr/faq_debug.md index 7a85fd1f24..754c79921c 100644 --- a/docs/fr-fr/faq_debug.md +++ b/docs/fr-fr/faq_debug.md @@ -104,58 +104,6 @@ En C, `1` implique un type [int] qui est [16 bits] pour les AVR, ce qui implique http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 -## Bootloader Jump ne fonctionne pas - -Configurez correctement la taille du bootloader dans le **Makefile**. Une mauvaise taille de section du bootloader empêchera probablement le démarrage avec **Magic command** et **Boot Magic**. - -``` -# Size of Bootloaders in bytes: -# Atmel DFU loader(ATmega32U4) 4096 -# Atmel DFU loader(AT90USB128) 8192 -# LUFA bootloader(ATmega32U4) 4096 -# Arduino Caterina(ATmega32U4) 4096 -# USBaspLoader(ATmega***) 2048 -# Teensy halfKay(ATmega32U4) 512 -# Teensy++ halfKay(AT90USB128) 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 -``` - -La taille de la section de démarrage de AVR est définie par l'option **BOOTSZ** fuse. Vérifiez la fiche technique du MCU. Veuilez noter que les tailles et adresses sont définies en **Word** (2 octets) dans la fiche technique alors que TMK utilise des **Byte**. - -La section de boot AVR se trouve à la fin de la mémoire flash, comme suit. - -``` -byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286) -0x0000 +---------------+ 0x00000 +---------------+ - | | | | - | | | | - | Application | | Application | - | | | | - = = = = - | | 32KB-4KB | | 128KB-8KB -0x6000 +---------------+ 0x1E000 +---------------+ - | Bootloader | 4KB | Bootloader | 8KB -0x7FFF +---------------+ 0x1FFFF +---------------+ - - -byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286) -0x0000 +---------------+ 0x00000 +---------------+ - | | | | - | | | | - | Application | | Application | - | | | | - = = = = - | | 32KB-512B | | 128KB-2KB -0x7E00 +---------------+ 0x1FC00 +---------------+ - | Bootloader | 512B | Bootloader | 2KB -0x7FFF +---------------+ 0x1FFFF +---------------+ -``` - -Référez-vous à cette discussion pour plus de référence. -https://github.com/tmk/tmk_keyboard/issues/179 - -Si vous utilisez un TeensyUSB, il y a un [bug connu](https://github.com/qmk/qmk_firmware/issues/164) qui fait que le bouton reset matériel empêche la touche RESET de fonctionner. Débrancher et rebrancher le clavier devrait résoudre le problème. - ## Les touches spéciales ne fonctionnent pas (Touche Système, Touches de contrôle du son) Vous devez définir `EXTRAKEY_ENABLE` dans le fichier `rules.mk` pour les utiliser dans QMK. @@ -189,25 +137,6 @@ Si vous voulez garder JTAG activé, ajoutez la ligne suivante à votre fichier ` #define NO_JTAG_DISABLE ``` -## Adding LED Indicators of Lock Keys - -Si vous souhaitez votre propre indicateur LED pour CapsLock, ScrollLock et NumLock alors lisez ce post. - -http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560 - -## Programmer Arduino Micro/Leonardo - -Appuyez sur le bouton reset puis lancez la commande suivante dans les 8 secondes. - -``` -avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0 -``` - -Le nom du périphérique peut varier en fonction de votre système. - -http://arduino.cc/en/Main/ArduinoBoardMicro -https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867 - ## Compatibilité USB 3 Il semble que certaines personnes ont eu des problèmes avec les ports USB 3, essayez un port USB 2. diff --git a/docs/fr-fr/faq_keymap.md b/docs/fr-fr/faq_keymap.md index 8244d4225f..2cbbe93082 100644 --- a/docs/fr-fr/faq_keymap.md +++ b/docs/fr-fr/faq_keymap.md @@ -72,24 +72,7 @@ Des vieux claviers mécaniques ont parfois des touches à verrouillage, mais les ## Ajouter des caractères spéciaux autres que ASCII comme la cédille 'Ç' -IL N'EXISTE AUCUNE METHODE UNIVERSELLE POUR LES AJOUTER QUI FONCTIONNE SUR TOUS LES SYSTEMES. Vous devez définir une **MACRO** d'une manière spécifique à votre OS ou layout. - -Voir ce post pour un exemple de code **MACRO**. - -http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620 - -Sous **Windows** vous pouvez utiliser la touche `AltGr` ou **Alt code**. -* http://en.wikipedia.org/wiki/AltGr_key -* http://en.wikipedia.org/wiki/Alt_code - -Sous **Mac OS** définissez une combinaison de touche `Option`. -* http://en.wikipedia.org/wiki/Option_key#Alternative_keyboard_input - -Sous **Xorg** vous pouvez utiliser une touche `compose` à la place. -* http://en.wikipedia.org/wiki/Compose_key - -Et voir ceci pour une entrée **Unicode**. -* http://en.wikipedia.org/wiki/Unicode_input +Voir la fonctionnalité [Unicode](feature_unicode.md). ## Touche `Fn` sur macOS @@ -144,54 +127,6 @@ Cette fonctionnalité permet d'utiliser une touche à la fois comme touche Écha Voir la fonctionnalité [Grave Escape](feature_grave_esc.md). -## Avoir les touches modificatrices qui ont double usage en flèches directionnelles. - -Ceci transforme les touches "modificateur droit" en touches fléchées lorsque les touches sont seulement "tapées" tout en restant des modificateurs lorsqu'elles sont maintenues. - -Dans TMK la fonction double rôle s'appelle **TAP**. - -```C - -#include "keymap_common.h" - - -/* Arrow keys on right modifier keys with TMK dual role feature - * - * https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role - * https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys - */ -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: qwerty */ - [0] = LAYOUT( \ - ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS,BSPC, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ - LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ - LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, ESC, \ - FN4, LGUI,LALT, SPC, APP, FN2, FN1, FN3), - [1] = LAYOUT( \ - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \ - TRNS,TRNS,TRNS, TRNS, TRNS,FN7, FN6, FN8), -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP), - [1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN), - [2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT), - [3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT), - [4] = ACTION_LAYER_MOMENTARY(1), - [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP), - [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN), - [7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME), - [8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END), -}; - -``` - -Touches double rôle : https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys - ## Eject sur Mac OSX Le keycode`KC_EJCT` fonctionne sous OSX. https://github.com/tmk/tmk_keyboard/issues/250 diff --git a/docs/zh-cn/faq_build.md b/docs/zh-cn/faq_build.md index 2f33fbca97..82d0697a86 100644 --- a/docs/zh-cn/faq_build.md +++ b/docs/zh-cn/faq_build.md @@ -56,11 +56,6 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666" ?> 事实上没有一个驱动的最佳选择，有些选项就是和某些系统相辅相成。但libUSB和WinUSB似乎也算是这里的最佳选择了。 如果bootloader在设备列表中没有显示，你可能要使能 "List all devices"选项在选项菜单中`Options`，然后找到有问题的bootloader设备。(译者注：在win10中可能为 查看-显示隐藏的设备) - -## WINAVR已淘汰 -不再推荐使用WINAVR，使用可能会导致问题 -详情请见[TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99). - ## USB VID 和 PID 你可以在编辑`config.h`时使用任何你想用的ID值。实际上，使用任何可能未使用的ID都没有问题，除了有极低的与其他产品发生冲突的可能性。 diff --git a/docs/zh-cn/faq_debug.md b/docs/zh-cn/faq_debug.md index a3cc7c510c..7eff7f2651 100644 --- a/docs/zh-cn/faq_debug.md +++ b/docs/zh-cn/faq_debug.md @@ -101,56 +101,6 @@ https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switc http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 - -## Bootloader跳转不好用 -在**Makefile**中正确配置**Makefile**大小。如果分区大小不正确，引导加载程序可能无法从**Magic command**和**Boot Magic**加载。 -``` -# bootloader字节数： -# Atmel DFU loader(ATmega32U4) 4096 -# Atmel DFU loader(AT90USB128) 8192 -# LUFA bootloader(ATmega32U4) 4096 -# Arduino Caterina(ATmega32U4) 4096 -# USBaspLoader(ATmega***) 2048 -# Teensy halfKay(ATmega32U4) 512 -# Teensy++ halfKay(AT90USB128) 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 -``` -AVR引导大小是通过**BOOTSZ**熔丝位来设置的。查阅你单片机的datasheet。 -记住，datasheet用的是**Word**(2字节)表示大小和地址，TMK用的是**Byte**。 - -AVR引导部分位于闪存的末尾，如下所示（Application是应用区，Bootloader是引导区）。 -``` -byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286) -0x0000 +---------------+ 0x00000 +---------------+ - | | | | - | | | | - | Application | | Application | - | | | | - = = = = - | | 32KB-4KB | | 128KB-8KB -0x6000 +---------------+ 0x1E000 +---------------+ - | Bootloader | 4KB | Bootloader | 8KB -0x7FFF +---------------+ 0x1FFFF +---------------+ - - -byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286) -0x0000 +---------------+ 0x00000 +---------------+ - | | | | - | | | | - | Application | | Application | - | | | | - = = = = - | | 32KB-512B | | 128KB-2KB -0x7E00 +---------------+ 0x1FC00 +---------------+ - | Bootloader | 512B | Bootloader | 2KB -0x7FFF +---------------+ 0x1FFFF +---------------+ -``` - -详情请见下方issue。 -https://github.com/tmk/tmk_keyboard/issues/179 - -如果你使用TeensyUSB, 有一个[已知bug](https://github.com/qmk/qmk_firmware/issues/164)硬件重置按钮阻止软件定义重置键工作。重新插拔键盘就好了。 - ## 特殊额外键不起作用(系统，音频控制键) 你要在`rules.mk`定义`EXTRAKEY_ENABLE`在QMK中使用它们。 @@ -173,24 +123,6 @@ EXTRAKEY_ENABLE = yes # 音频控制和系统控制 Arduino Leonardo和micro使用**ATMega32U4**，该芯片TMK可用，但Arduino的bootloader会导致问题。 -## 为锁定键添加指示灯 -你要自制CapsLock, ScrollLock 和 NumLock指示灯？见下文。 - -http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560 - -## 为Arduino Micro/Leonardo编程 -按下重置键然后在8秒内运行下方这样的命令。 - -``` -avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0 -``` - -设备名称因系统而异。 - -http://arduino.cc/en/Main/ArduinoBoardMicro -https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867 - - ## USB 3 兼容性 据传说有些人用USB3接口会有问题，用USB2的试试。 diff --git a/docs/zh-cn/faq_keymap.md b/docs/zh-cn/faq_keymap.md index ee8e3c06bf..7fb434b4c8 100644 --- a/docs/zh-cn/faq_keymap.md +++ b/docs/zh-cn/faq_keymap.md @@ -66,24 +66,8 @@ https://github.com/tmk/tmk_keyboard/issues/67 远古机械键盘偶尔会有自锁机械开关，现在几乎没有了。***大多数情况下你不需要使用该功能，且要使用`KC_CAPS`, `KC_NLCK`和`KC_SLCK`这三个键码。*** ## 输入ASCII之外的特殊字符比如Cédille 'Ç' -没有在所有系统中输入这个的通用方法。你要定义针对你的特定操作系统或布局的**宏**。 -比如看这个**宏**代码的文章。 - -http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620 -<!--翻译问题：下方维基百科链接应全部替换为中文链接，暂未找到全部--> -在**Windows**上，可以用`AltGr`键或**Alt码**。 -* http://en.wikipedia.org/wiki/AltGr_key -* https://zh.wikipedia.org/wiki/Alt%E7%A0%81 - -在**Mac OS**定义`Option`键组合。 -* https://zh.wikipedia.org/wiki/Option%E9%94%AE#%E6%9B%BF%E4%BB%A3%E9%94%AE%E7%9B%98%E8%BE%93%E5%85%A5 - -在**Xorg**可以改用`compose`键。 -* http://en.wikipedia.org/wiki/Compose_key - -下方链接查看**Unicode**输入。 -* http://en.wikipedia.org/wiki/Unicode_input +请见[Unicode](feature_unicode.md)功能。 ## macOS上的`Fn` @@ -136,51 +120,6 @@ https://github.com/tekezo/Karabiner/issues/403 请见[Grave Escape](feature_grave_esc.md)功能。 -## 右侧双角色修改键(诸如Shift、Alt等有修改其他键作用的键)变箭头键 -右侧修改键单击时会变为箭头键，长按就还是修改键。在TMK中双角色键称之为**TAP**. -``` - -#include "keymap_common.h" - - -/* 用TMK双角色键功能实现右侧修改键改箭头键 - * - * https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role - * https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys - */ -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: qwerty */ - [0] = LAYOUT( \ - ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS,BSPC, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ - LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ - LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, ESC, \ - FN4, LGUI,LALT, SPC, APP, FN2, FN1, FN3), - [1] = LAYOUT( \ - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \ - TRNS,TRNS,TRNS, TRNS, TRNS,FN7, FN6, FN8), -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP), - [1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN), - [2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT), - [3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT), - [4] = ACTION_LAYER_MOMENTARY(1), - [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP), - [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN), - [7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME), - [8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END), -}; - -``` - -双角色键说明: https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys - - ## Mac OSX的弹出键 `KC_EJCT` 键码在OSX可以使用 https://github.com/tmk/tmk_keyboard/issues/250 似乎Windows10会忽略该键码，Linux/Xorg可以识别该键码但默认不映射。 |