summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--common_features.mk5
-rw-r--r--drivers/arm/i2c_master.c11
-rw-r--r--drivers/arm/i2c_master.h10
-rw-r--r--drivers/issi/is31fl3731-simple.c5
-rw-r--r--quantum/led_matrix.c47
-rw-r--r--quantum/led_matrix.h3
-rw-r--r--quantum/led_matrix_drivers.c3
7 files changed, 45 insertions, 39 deletions
diff --git a/common_features.mk b/common_features.mk
index 8c7043cb7e..ff01ecb85d 100644
--- a/common_features.mk
+++ b/common_features.mk
@@ -209,7 +209,10 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
CIE1931_CURVE = yes
endif
- ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
+ ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
+ OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
+ endif
+ ifeq ($(filter $(LED_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
endif
endif
diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c
index 385bd97cb8..1c3da2a1a2 100644
--- a/drivers/arm/i2c_master.c
+++ b/drivers/arm/i2c_master.c
@@ -46,13 +46,13 @@ __attribute__ ((weak))
void i2c_init(void)
{
// Try releasing special pins for a short time
- palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
- palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
+ palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_INPUT);
+ palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_INPUT);
chThdSleepMilliseconds(10);
-
- palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
- palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
+
+ palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
+ palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
//i2cInit(); //This is invoked by halInit() so no need to redo it.
}
@@ -67,6 +67,7 @@ uint8_t i2c_start(uint8_t address)
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
{
+ // FIXME: Next steps: Add a print here, copy this file to your rgb_matrix firmware. Compare both.
i2c_address = address;
i2cStart(&I2C_DRIVER, &i2cconfig);
return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
diff --git a/drivers/arm/i2c_master.h b/drivers/arm/i2c_master.h
index 392760328f..7a9eb32eb9 100644
--- a/drivers/arm/i2c_master.h
+++ b/drivers/arm/i2c_master.h
@@ -26,6 +26,16 @@
#include "ch.h"
#include <hal.h>
+#ifndef I2C1_BANK
+ #define I2C1_BANK GPIOB
+#endif
+#ifndef I2C1_SCL
+ #define I2C1_SCL 6
+#endif
+#ifndef I2C1_SDA
+ #define I2C1_SDA 7
+#endif
+
#ifndef I2C_DRIVER
#define I2C_DRIVER I2CD1
#endif
diff --git a/drivers/issi/is31fl3731-simple.c b/drivers/issi/is31fl3731-simple.c
index 9c31df2092..ff6620b72f 100644
--- a/drivers/issi/is31fl3731-simple.c
+++ b/drivers/issi/is31fl3731-simple.c
@@ -158,12 +158,7 @@ void IS31FL3731_init(uint8_t addr) {
// enable software shutdown
IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
// this delay was copied from other drivers, might not be needed
- // FIXME: Don't we have a wrapper for this already?
- #ifdef __AVR__
- _delay_ms(10);
- #else
wait_ms(10);
- #endif
// picture mode
IS31FL3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
diff --git a/quantum/led_matrix.c b/quantum/led_matrix.c
index 3b284990d9..f849d478dd 100644
--- a/quantum/led_matrix.c
+++ b/quantum/led_matrix.c
@@ -55,6 +55,9 @@ led_config_t led_matrix_config;
bool g_suspend_state = false;
+// Last uniform brightness level.
+uint8_t g_uniform_brightness = 0;
+
// Global tick at 20 Hz
uint32_t g_tick = 0;
@@ -118,6 +121,7 @@ void led_matrix_set_index_value_all(uint8_t value) {
}
bool process_led_matrix(uint16_t keycode, keyrecord_t *record) {
+/* FIXME: Why you comment out skully?
if (record->event.pressed) {
uint8_t led[8], led_count;
map_row_column_to_led(record->event.key.row, record->event.key.col, led, &led_count);
@@ -141,6 +145,7 @@ bool process_led_matrix(uint16_t keycode, keyrecord_t *record) {
g_any_key_hit = 255;
#endif
}
+*/
return true;
}
@@ -155,22 +160,20 @@ void led_matrix_all_off(void) {
// Uniform brightness
void led_matrix_uniform_brightness(void) {
- led_matrix_set_index_value_all(led_matrix_config.val);
+ uint8_t current_brightness = (LED_MATRIX_MAXIMUM_BRIGHTNESS / BACKLIGHT_LEVELS) * led_matrix_config.val;
+ if (current_brightness != g_uniform_brightness) {
+ g_uniform_brightness = current_brightness;
+ led_matrix_set_index_value_all(current_brightness);
+ }
}
void led_matrix_custom(void) {}
void led_matrix_task(void) {
- #ifdef TRACK_PREVIOUS_EFFECT
- static uint8_t toggle_enable_last = 255;
- #endif
- if (!led_matrix_config.enable) {
- led_matrix_all_off();
- led_matrix_indicators();
- #ifdef TRACK_PREVIOUS_EFFECT
- toggle_enable_last = led_matrix_config.enable;
- #endif
- return;
+ if (!led_matrix_config.enable) {
+ led_matrix_all_off();
+ led_matrix_indicators();
+ return;
}
// delay 1 second before driving LEDs or doing anything else
@@ -187,6 +190,7 @@ void led_matrix_task(void) {
g_any_key_hit++;
}
+/* FIXME: WHY YOU COMMENT OUT?!
for (int led = 0; led < LED_DRIVER_LED_COUNT; led++) {
if (g_key_hit[led] < 255) {
if (g_key_hit[led] == 254)
@@ -200,24 +204,13 @@ void led_matrix_task(void) {
led_matrix_uniform_brightness();
return;
}
-
+*/
// Ideally we would also stop sending zeros to the LED driver PWM buffers
// while suspended and just do a software shutdown. This is a cheap hack for now.
bool suspend_backlight = ((g_suspend_state && LED_DISABLE_WHEN_USB_SUSPENDED) ||
(LED_DISABLE_AFTER_TIMEOUT > 0 && g_any_key_hit > LED_DISABLE_AFTER_TIMEOUT * 60 * 20));
uint8_t effect = suspend_backlight ? 0 : led_matrix_config.mode;
- #ifdef TRACK_PREVIOUS_EFFECT
- // Keep track of the effect used last time,
- // detect change in effect, so each effect can
- // have an optional initialization.
-
- static uint8_t effect_last = 255;
- bool initialize = (effect != effect_last) || (led_matrix_config.enable != toggle_enable_last);
- effect_last = effect;
- toggle_enable_last = led_matrix_config.enable;
- #endif
-
// this gets ticked at 20 Hz.
// each effect can opt to do calculations
// and/or request PWM buffer updates.
@@ -230,10 +223,12 @@ void led_matrix_task(void) {
break;
}
- if (! suspend_backlight) {
+ if (!suspend_backlight) {
led_matrix_indicators();
}
+ // Tell the LED driver to update its state
+ led_matrix_driver.flush();
}
void led_matrix_indicators(void) {
@@ -404,3 +399,7 @@ void led_matrix_set_value(uint8_t val) {
led_matrix_set_value_noeeprom(val);
eeconfig_update_led_matrix(led_matrix_config.raw);
}
+
+void backlight_set(uint8_t val) {
+ led_matrix_set_value(val);
+}
diff --git a/quantum/led_matrix.h b/quantum/led_matrix.h
index 6db162963e..9bf20d0447 100644
--- a/quantum/led_matrix.h
+++ b/quantum/led_matrix.h
@@ -112,9 +112,6 @@ uint8_t led_matrix_get_mode(void);
void led_matrix_set_value(uint8_t mode);
void led_matrix_set_value_noeeprom(uint8_t mode);
-// Hook into the existing backlight API
-#define backlight_set(val) led_matrix_set_value(val)
-
typedef struct {
/* Perform any initialisation required for the other driver functions to work. */
void (*init)(void);
diff --git a/quantum/led_matrix_drivers.c b/quantum/led_matrix_drivers.c
index e0f8b20949..21e8a14c66 100644
--- a/quantum/led_matrix_drivers.c
+++ b/quantum/led_matrix_drivers.c
@@ -64,7 +64,8 @@ static void init(void) {
IS31FL3733_init(LED_DRIVER_ADDR_4);
#endif
#endif
- for (int index = 0; index < LED_DRIVER_COUNT; index++) {
+
+ for (int index = 0; index < LED_DRIVER_LED_COUNT; index++) {
#ifdef IS31FL3731
IS31FL3731_set_led_control_register(index, true);
#else
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 06:26:11 +0000