diff options
84 files changed, 915 insertions, 1592 deletions
diff --git a/.github/workflows/api.yml b/.github/workflows/api.yml index a19667f97e..f0c49baf60 100644 --- a/.github/workflows/api.yml +++ b/.github/workflows/api.yml @@ -35,4 +35,4 @@ jobs: AWS_ACCESS_KEY_ID: ${{ secrets.SPACES_ACCESS_KEY }} AWS_SECRET_ACCESS_KEY: ${{ secrets.SPACES_SECRET_KEY }} AWS_S3_ENDPOINT: https://nyc3.digitaloceanspaces.com - SOURCE_DIR: 'api_data' + SOURCE_DIR: '.build/api_data' diff --git a/.github/workflows/develop_api.yml b/.github/workflows/develop_api.yml index f0098142c7..3eb6e53c20 100644 --- a/.github/workflows/develop_api.yml +++ b/.github/workflows/develop_api.yml @@ -35,4 +35,4 @@ jobs: AWS_ACCESS_KEY_ID: ${{ secrets.SPACES_ACCESS_KEY }} AWS_SECRET_ACCESS_KEY: ${{ secrets.SPACES_SECRET_KEY }} AWS_S3_ENDPOINT: https://nyc3.digitaloceanspaces.com - SOURCE_DIR: 'api_data' + SOURCE_DIR: '.build/api_data' diff --git a/api_data/_config.yml b/api_data/_config.yml deleted file mode 100644 index 277f1f2c51..0000000000 --- a/api_data/_config.yml +++ /dev/null @@ -1 +0,0 @@ -theme: jekyll-theme-cayman diff --git a/builddefs/common_rules.mk b/builddefs/common_rules.mk index b303a87919..85dfe67f3f 100644 --- a/builddefs/common_rules.mk +++ b/builddefs/common_rules.mk @@ -316,7 +316,7 @@ gccversion : @$(BUILD_CMD) %.uf2: %.hex - $(eval CMD=$(UF2CONV) $(BUILD_DIR)/$(TARGET).hex -o $(BUILD_DIR)/$(TARGET).uf2 -c -f $(UF2_FAMILY) >/dev/null 2>&1) + $(eval CMD=$(UF2CONV) $(BUILD_DIR)/$(TARGET).hex --output $(BUILD_DIR)/$(TARGET).uf2 --convert --family $(UF2_FAMILY) >/dev/null 2>&1) #@$(SILENT) || printf "$(MSG_EXECUTING) '$(CMD)':\n" @$(SILENT) || printf "$(MSG_UF2) $@" | $(AWK_CMD) @$(BUILD_CMD) diff --git a/builddefs/mcu_selection.mk b/builddefs/mcu_selection.mk index 9fdd22c3b6..ec33ee4446 100644 --- a/builddefs/mcu_selection.mk +++ b/builddefs/mcu_selection.mk @@ -9,7 +9,9 @@ ifneq ($(findstring MKL26Z64, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = KINETIS MCU_SERIES = KL2x @@ -36,7 +38,9 @@ ifneq ($(findstring MK20DX128, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = KINETIS MCU_SERIES = K20x @@ -63,7 +67,9 @@ ifneq ($(findstring MK20DX256, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = KINETIS MCU_SERIES = K20x @@ -90,7 +96,9 @@ ifneq ($(findstring MK66FX1M0, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = KINETIS MCU_SERIES = MK66F18 @@ -117,7 +125,9 @@ ifneq ($(findstring STM32F042, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F0xx @@ -157,7 +167,9 @@ ifneq ($(findstring STM32F072, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F0xx @@ -192,7 +204,9 @@ ifneq ($(findstring STM32F103, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F1xx @@ -224,7 +238,9 @@ ifneq ($(findstring STM32F303, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F3xx @@ -259,7 +275,9 @@ ifneq ($(findstring STM32F401, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F4xx @@ -299,7 +317,9 @@ ifneq ($(findstring STM32F405, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F4xx @@ -334,7 +354,9 @@ ifneq ($(findstring STM32F407, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F4xx @@ -369,7 +391,9 @@ ifneq ($(findstring STM32F411, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F4xx @@ -409,7 +433,9 @@ ifneq ($(findstring STM32F446, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F4xx @@ -441,7 +467,9 @@ ifneq ($(findstring STM32G431, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32G4xx @@ -476,7 +504,9 @@ ifneq ($(findstring STM32G474, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32G4xx @@ -511,7 +541,9 @@ ifneq (,$(filter $(MCU),STM32L432 STM32L442)) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32L4xx @@ -548,7 +580,9 @@ ifneq (,$(filter $(MCU),STM32L433 STM32L443)) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32L4xx @@ -585,7 +619,9 @@ ifneq (,$(filter $(MCU),STM32L412 STM32L422)) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32L4xx @@ -602,7 +638,7 @@ ifneq (,$(filter $(MCU),STM32L412 STM32L422)) # <keyboard_dir>/boards/, or drivers/boards/ BOARD ?= GENERIC_STM32_L412XB - PLATFORM_NAME ?= platform_l432 + PLATFORM_NAME ?= platform_l412_l422 USE_FPU ?= yes @@ -622,7 +658,9 @@ ifneq ($(findstring WB32F3G71, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = WB32 MCU_SERIES = WB32F3G71xx @@ -657,7 +695,10 @@ ifneq ($(findstring GD32VF103, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_PORT_NAME = GD MCU_FAMILY = GD32V MCU_SERIES = GD32VF103 diff --git a/data/mappings/info_config.json b/data/mappings/info_config.json index cfe8807d43..2121741d19 100644 --- a/data/mappings/info_config.json +++ b/data/mappings/info_config.json @@ -3,7 +3,7 @@ { # Format: # <config.h key>: {"info_key": <info.json key>, ["value_type": <value_type>], ["to_json": <true/false>], ["to_c": <true/false>]} - # value_type: one of "array", "array.int", "bool", "int", "hex", "list", "mapping" + # value_type: one of "array", "array.int", "bool", "int", "hex", "list", "mapping", "str", "raw" # to_json: Default `true`. Set to `false` to exclude this mapping from info.json # to_c: Default `true`. Set to `false` to exclude this mapping from config.h # warn_duplicate: Default `true`. Set to `false` to turn off warning when a value exists in both places @@ -17,7 +17,7 @@ "DEVICE_VER": {"info_key": "usb.device_ver", "value_type": "hex"}, # TODO: Replace ^^^ with vvv #"DEVICE_VER": {"info_key": "usb.device_version", "value_type": "bcd_version"}, - "DESCRIPTION": {"info_key": "keyboard_folder", "to_json": false}, + "DESCRIPTION": {"info_key": "keyboard_folder", "value_type": "str", "to_json": false}, "DIODE_DIRECTION": {"info_key": "diode_direction"}, "FORCE_NKRO": {"info_key": "usb.force_nkro", "value_type": "bool"}, "DYNAMIC_KEYMAP_EEPROM_MAX_ADDR": {"info_key": "dynamic_keymap.eeprom_max_addr", "value_type": "int"}, diff --git a/data/mappings/info_rules.json b/data/mappings/info_rules.json index aea67e04c8..f03cadcd44 100644 --- a/data/mappings/info_rules.json +++ b/data/mappings/info_rules.json @@ -3,7 +3,7 @@ { # Format: # <rules.mk key>: {"info_key": <info.json key>, ["value_type": <value_type>], ["to_json": <true/false>], ["to_c": <true/false>]} - # value_type: one of "array", "array.int", "bool", "int", "list", "hex", "mapping" + # value_type: one of "array", "array.int", "bool", "int", "list", "hex", "mapping", "str", "raw" # to_json: Default `true`. Set to `false` to exclude this mapping from info.json # to_c: Default `true`. Set to `false` to exclude this mapping from rules.mk # warn_duplicate: Default `true`. Set to `false` to turn off warning when a value exists in both places @@ -20,6 +20,6 @@ "MOUSEKEY_ENABLE": {"info_key": "mouse_key.enabled", "value_type": "bool"}, "NO_USB_STARTUP_CHECK": {"info_key": "usb.no_startup_check", "value_type": "bool"}, "SPLIT_KEYBOARD": {"info_key": "split.enabled", "value_type": "bool"}, - "SPLIT_TRANSPORT": {"info_key": "split.transport.protocol", "value_type": "str", "to_c": false}, + "SPLIT_TRANSPORT": {"info_key": "split.transport.protocol", "to_c": false}, "WAIT_FOR_USB": {"info_key": "usb.wait_for", "value_type": "bool"} } diff --git a/api_data/readme.md b/data/templates/api/readme.md index a4b2c6bce7..a4b2c6bce7 100644 --- a/api_data/readme.md +++ b/data/templates/api/readme.md diff --git a/docs/_summary.md b/docs/_summary.md index 74203aa0f8..250a48fe6b 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -147,7 +147,7 @@ * [EEPROM Driver](eeprom_driver.md) * ['serial' Driver](serial_driver.md) * [UART Driver](uart_driver.md) - * [GPIO Controls](internals_gpio_control.md) + * [GPIO Controls](gpio_control.md) * [Keyboard Guidelines](hardware_keyboard_guidelines.md) * Python Development @@ -183,10 +183,10 @@ * [Understanding QMK](understanding_qmk.md) * QMK Internals (In Progress) - * [Defines](internals_defines.md) - * [Input Callback Reg](internals_input_callback_reg.md) - * [Midi Device](internals_midi_device.md) - * [Midi Device Setup Process](internals_midi_device_setup_process.md) - * [Midi Util](internals_midi_util.md) - * [Send Functions](internals_send_functions.md) - * [Sysex Tools](internals_sysex_tools.md) + * [Defines](internals/defines.md) + * [Input Callback Reg](internals/input_callback_reg.md) + * [Midi Device](internals/midi_device.md) + * [Midi Device Setup Process](internals/midi_device_setup_process.md) + * [Midi Util](internals/midi_util.md) + * [Send Functions](internals/send_functions.md) + * [Sysex Tools](internals/sysex_tools.md) diff --git a/docs/data_driven_config.md b/docs/data_driven_config.md index 38fb5dbf14..cdcf21a19c 100644 --- a/docs/data_driven_config.md +++ b/docs/data_driven_config.md @@ -44,7 +44,7 @@ In other cases you should group like options together in an `object`. This is pa In most cases you can add a simple mapping. These are maintained as JSON files in `data/mappings/info_config.json` and `data/mappings/info_rules.json`, and control mapping for `config.h` and `rules.mk`, respectively. Each mapping is keyed by the `config.h` or `rules.mk` variable, and the value is a hash with the following keys: * `info_key`: (required) The location within `info.json` for this value. See below. -* `value_type`: (optional) Default `str`. The format for this variable's value. See below. +* `value_type`: (optional) Default `raw`. The format for this variable's value. See below. * `to_json`: (optional) Default `true`. Set to `false` to exclude this mapping from info.json * `to_c`: (optional) Default `true`. Set to `false` to exclude this mapping from config.h * `warn_duplicate`: (optional) Default `true`. Set to `false` to turn off warning when a value exists in both places @@ -57,7 +57,7 @@ Under the hood we use [Dotty Dict](https://dotty-dict.readthedocs.io/en/latest/) #### Value Types -By default we treat all values as simple strings. If your value is more complex you can use one of these types to intelligently parse the data: +By default we treat all values as unquoted "raw" data. If your value is more complex you can use one of these types to intelligently parse the data: * `array`: A comma separated array of strings * `array.int`: A comma separated array of integers @@ -65,6 +65,7 @@ By default we treat all values as simple strings. If your value is more complex * `hex`: A number formatted as hex * `list`: A space separate array of strings * `mapping`: A hash of key/value pairs +* `str`: A quoted string literal ### Add code to extract it diff --git a/docs/feature_midi.md b/docs/feature_midi.md index 3da5c4940a..490bf7cc7d 100644 --- a/docs/feature_midi.md +++ b/docs/feature_midi.md @@ -254,7 +254,7 @@ For the above, the `MI_C` keycode will produce a C3 (note number 48), and so on. <!-- #### QMK Internals (Autogenerated) - * [Internals/MIDI Device Setup Process](internals_midi_device_setup_process.md) - * [Internals/MIDI Device](internals_midi_device.md) - * [Internals/MIDI Util](internals_midi_util.md) + * [Internals/MIDI Device Setup Process](internals/midi_device_setup_process.md) + * [Internals/MIDI Device](internals/midi_device.md) + * [Internals/MIDI Util](internals/midi_util.md) --> diff --git a/docs/feature_unicode.md b/docs/feature_unicode.md index 6c3e2a1a2f..bced419a03 100644 --- a/docs/feature_unicode.md +++ b/docs/feature_unicode.md @@ -230,17 +230,6 @@ send_unicode_string("(ノಠ痊ಠ)ノ彡┻━┻"); Example uses include sending Unicode strings when a key is pressed, as described in [Macros](feature_macros.md). -### `send_unicode_hex_string()` (Deprecated) - -Similar to `send_unicode_string()`, but the characters are represented by their Unicode code points, written in hexadecimal and separated by spaces. For example, the table flip above would be achieved with: - -```c -send_unicode_hex_string("0028 30CE 0CA0 75CA 0CA0 0029 30CE 5F61 253B 2501 253B"); -``` - -An easy way to convert your Unicode string to this format is to use [this site](https://r12a.github.io/app-conversion/) and take the result in the "Hex/UTF-32" section. - - ## Additional Language Support In `quantum/keymap_extras`, you'll see various language files — these work the same way as the ones for alternative layouts such as Colemak or BÉPO. When you include one of these language headers, you gain access to keycodes specific to that language / national layout. Such keycodes are defined by a 2-letter country/language code, followed by an underscore and a 4-letter abbreviation of the character to which the key corresponds. For example, including `keymap_french.h` and using `FR_UGRV` in your keymap will output `ù` when typed on a system with a native French AZERTY layout. diff --git a/docs/flashing.md b/docs/flashing.md index 83f4bf82ae..ae31f9c621 100644 --- a/docs/flashing.md +++ b/docs/flashing.md @@ -347,3 +347,14 @@ Flashing sequence: 2. Wait for the OS to detect the device 3. Copy the .uf2 file to the new USB disk 4. Wait for the keyboard to become available + +or + +CLI Flashing sequence: + +1. Enter the bootloader using any of the following methods: + * Tap the `RESET` keycode + * Double-tap the `nRST` button on the PCB. +2. Wait for the OS to detect the device +3. Flash via QMK CLI eg. `qmk flash --keyboard handwired/onekey/blackpill_f411_tinyuf2 --keymap default` +4. Wait for the keyboard to become available diff --git a/docs/internals_gpio_control.md b/docs/gpio_control.md index e1f1515b71..e1f1515b71 100644 --- a/docs/internals_gpio_control.md +++ b/docs/gpio_control.md diff --git a/docs/internals_defines.md b/docs/internals/defines.md index fdcb553589..fdcb553589 100644 --- a/docs/internals_defines.md +++ b/docs/internals/defines.md diff --git a/docs/internals_input_callback_reg.md b/docs/internals/input_callback_reg.md index 4ea132a83a..4ea132a83a 100644 --- a/docs/internals_input_callback_reg.md +++ b/docs/internals/input_callback_reg.md diff --git a/docs/internals_midi_device.md b/docs/internals/midi_device.md index 5b57abd454..5b57abd454 100644 --- a/docs/internals_midi_device.md +++ b/docs/internals/midi_device.md diff --git a/docs/internals_midi_device_setup_process.md b/docs/internals/midi_device_setup_process.md index ae82197c5c..ae82197c5c 100644 --- a/docs/internals_midi_device_setup_process.md +++ b/docs/internals/midi_device_setup_process.md diff --git a/docs/internals_midi_util.md b/docs/internals/midi_util.md index 97821bd180..97821bd180 100644 --- a/docs/internals_midi_util.md +++ b/docs/internals/midi_util.md diff --git a/docs/internals_send_functions.md b/docs/internals/send_functions.md index b331508008..b331508008 100644 --- a/docs/internals_send_functions.md +++ b/docs/internals/send_functions.md diff --git a/docs/internals_sysex_tools.md b/docs/internals/sysex_tools.md index 55dbe9e164..55dbe9e164 100644 --- a/docs/internals_sysex_tools.md +++ b/docs/internals/sysex_tools.md diff --git a/docs/ja/_summary.md b/docs/ja/_summary.md index b90480041c..81b5756c27 100644 --- a/docs/ja/_summary.md +++ b/docs/ja/_summary.md @@ -137,7 +137,7 @@ * [EEPROM ドライバ](ja/eeprom_driver.md) * [シリアル ドライバ](ja/serial_driver.md) * [UART ドライバ](ja/uart_driver.md) - * [GPIO 制御](ja/internals_gpio_control.md) + * [GPIO 制御](ja/gpio_control.md) * [キーボード ガイドライン](ja/hardware_keyboard_guidelines.md) * Python 開発 @@ -173,10 +173,10 @@ * [QMK を理解する](ja/understanding_qmk.md) * QMK の内部詳細(作成中) - * [定義](ja/internals_defines.md) - * [入力コールバック登録](ja/internals_input_callback_reg.md) - * [Midi デバイス](ja/internals_midi_device.md) - * [Midi デバイスのセットアップ手順](ja/internals_midi_device_setup_process.md) - * [Midi ユーティリティ](ja/internals_midi_util.md) - * [Midi 送信関数](ja/internals_send_functions.md) - * [Sysex Tools](ja/internals_sysex_tools.md) + * [定義](ja/internals/defines.md) + * [入力コールバック登録](ja/internals/input_callback_reg.md) + * [Midi デバイス](ja/internals/midi_device.md) + * [Midi デバイスのセットアップ手順](ja/internals/midi_device_setup_process.md) + * [Midi ユーティリティ](ja/internals/midi_util.md) + * [Midi 送信関数](ja/internals/send_functions.md) + * [Sysex Tools](ja/internals/sysex_tools.md) diff --git a/docs/ja/feature_unicode.md b/docs/ja/feature_unicode.md index bfcb866ce1..2158678f3c 100644 --- a/docs/ja/feature_unicode.md +++ b/docs/ja/feature_unicode.md @@ -233,17 +233,6 @@ send_unicode_string("(ノಠ痊ಠ)ノ彡┻━┻"); 使用例には、[Macros](ja/feature_macros.md) で説明されているように、キーが押された時に Unicode 文字列を送信することが含まれます。 -### `send_unicode_hex_string()` - -`send_unicode_string()` に似ていますが、文字は Unicode コードポイントで表され、16進数で記述され、空白で区切られています。例えば、上記のちゃぶ台返しは以下で表されます: - -```c -send_unicode_hex_string("0028 30CE 0CA0 75CA 0CA0 0029 30CE 5F61 253B 2501 253B"); -``` - -[このサイト](https://r12a.github.io/app-conversion/)で結果を "Hex/UTF-32" で受け取ることで、Unicode 文字列をこの形式に簡単に変換できます。 - - ## 追加の言語サポート `quantum/keymap_extras` には、様々な言語ファイルがあります — これらは Colemak または BÉPO のような代替レイアウトのファイルと同じように動作します。これらの言語ヘッダのいずれかを `#include` すると、その言語/国のレイアウトに固有のキーコードにアクセスできます。このようなキーコードは、2文字の国/言語コードの後に、アンダースコアとキーが対応する4文字の略語が続くことで定義されます。例えば、キーマップに `keymap_french.h` を含め、`FR_UGRV` を使うと、ネイティブのフランス語 AZERTY レイアウトを使うシステムで入力すると、`ù` が出力されます。 diff --git a/docs/ja/internals_gpio_control.md b/docs/ja/gpio_control.md index 60c5367870..7bece3e0c7 100644 --- a/docs/ja/internals_gpio_control.md +++ b/docs/ja/gpio_control.md @@ -1,8 +1,8 @@ # GPIO 制御 :id=gpio-control <!--- - original document: 0.13.15:docs/internals_gpio_control.md - git diff 0.13.15 HEAD -- docs/internals_gpio_control.md | cat + original document: 0.13.15:docs/gpio_control.md + git diff 0.13.15 HEAD -- docs/gpio_control.md | cat --> QMK には、マイクロコントローラに依存しない GPIO 制御抽象レイヤーがあります。これは異なるプラットフォーム間でピン制御に簡単にアクセスできるようにするためのものです。 diff --git a/docs/ja/internals_defines.md b/docs/ja/internals_defines.md deleted file mode 100644 index 512730df75..0000000000 --- a/docs/ja/internals_defines.md +++ /dev/null @@ -1,78 +0,0 @@ -# `defines` グループ {#group__defines} - -## 概要 - -メンバー | 説明 ---------------------------------|--------------------------------------------- -`define `[`SYSEX_BEGIN`](#group__defines_1ga1a3c39bb790dda8a368c4247caabcf79) | -`define `[`SYSEX_END`](#group__defines_1ga753706d1d28e6f96d7caf1973e80feed) | -`define `[`MIDI_STATUSMASK`](#group__defines_1gab78a1c818a5f5dab7a8946543f126c69) | -`define `[`MIDI_CHANMASK`](#group__defines_1ga239edc0a6f8405d3a8f2804f1590b909) | -`define `[`MIDI_CC`](#group__defines_1ga45f116a1daab76b3c930c2cecfaef215) | -`define `[`MIDI_NOTEON`](#group__defines_1gafd416f27bf3590868c0c1f55c30be4c7) | -`define `[`MIDI_NOTEOFF`](#group__defines_1gabed24bea2d989fd655e2ef2ad0765adc) | -`define `[`MIDI_AFTERTOUCH`](#group__defines_1ga3a322d8cfd53576a2e167c1840551b0f) | -`define `[`MIDI_PITCHBEND`](#group__defines_1gabcc799504e8064679bca03f232223af4) | -`define `[`MIDI_PROGCHANGE`](#group__defines_1gaefb3f1595ffbb9db66b46c2c919a3d42) | -`define `[`MIDI_CHANPRESSURE`](#group__defines_1gaeb3281cc7fcd0daade8ed3d2dfc33dbe) | -`define `[`MIDI_CLOCK`](#group__defines_1gafa5e4e295aafd15ab7893344599b3b89) | -`define `[`MIDI_TICK`](#group__defines_1ga3b99408ff864613765d4c3c2ceb52aa7) | -`define `[`MIDI_START`](#group__defines_1ga8233631c85823aa546f932ad8975caa4) | -`define `[`MIDI_CONTINUE`](#group__defines_1gab24430f0081e27215b0da84dd0ee745c) | -`define `[`MIDI_STOP`](#group__defines_1ga3af9271d4b1f0d22904a0b055f48cf62) | -`define `[`MIDI_ACTIVESENSE`](#group__defines_1gacd88ed42dba52bb4b2052c5656362677) | -`define `[`MIDI_RESET`](#group__defines_1ga02947f30ca62dc332fdeb10c5868323b) | -`define `[`MIDI_TC_QUARTERFRAME`](#group__defines_1gaaa072f33590e236d1bfd8f28e833ae31) | -`define `[`MIDI_SONGPOSITION`](#group__defines_1ga412f6ed33a2150051374bee334ee1705) | -`define `[`MIDI_SONGSELECT`](#group__defines_1gafcab254838b028365ae0259729e72c4e) | -`define `[`MIDI_TUNEREQUEST`](#group__defines_1ga8100b907b8c0a84e58b1c53dcd9bd795) | -`define `[`SYSEX_EDUMANUFID`](#group__defines_1ga5ef855ed955b00a2239ca16afbeb164f) | - -## メンバー - -#### `define `[`SYSEX_BEGIN`](#group__defines_1ga1a3c39bb790dda8a368c4247caabcf79) {#group__defines_1ga1a3c39bb790dda8a368c4247caabcf79} - -#### `define `[`SYSEX_END`](#group__defines_1ga753706d1d28e6f96d7caf1973e80feed) {#group__defines_1ga753706d1d28e6f96d7caf1973e80feed} - -#### `define `[`MIDI_STATUSMASK`](#group__defines_1gab78a1c818a5f5dab7a8946543f126c69) {#group__defines_1gab78a1c818a5f5dab7a8946543f126c69} - -#### `define `[`MIDI_CHANMASK`](#group__defines_1ga239edc0a6f8405d3a8f2804f1590b909) {#group__defines_1ga239edc0a6f8405d3a8f2804f1590b909} - -#### `define `[`MIDI_CC`](#group__defines_1ga45f116a1daab76b3c930c2cecfaef215) {#group__defines_1ga45f116a1daab76b3c930c2cecfaef215} - -#### `define `[`MIDI_NOTEON`](#group__defines_1gafd416f27bf3590868c0c1f55c30be4c7) {#group__defines_1gafd416f27bf3590868c0c1f55c30be4c7} - -#### `define `[`MIDI_NOTEOFF`](#group__defines_1gabed24bea2d989fd655e2ef2ad0765adc) {#group__defines_1gabed24bea2d989fd655e2ef2ad0765adc} - -#### `define `[`MIDI_AFTERTOUCH`](#group__defines_1ga3a322d8cfd53576a2e167c1840551b0f) {#group__defines_1ga3a322d8cfd53576a2e167c1840551b0f} - -#### `define `[`MIDI_PITCHBEND`](#group__defines_1gabcc799504e8064679bca03f232223af4) {#group__defines_1gabcc799504e8064679bca03f232223af4} - -#### `define `[`MIDI_PROGCHANGE`](#group__defines_1gaefb3f1595ffbb9db66b46c2c919a3d42) {#group__defines_1gaefb3f1595ffbb9db66b46c2c919a3d42} - -#### `define `[`MIDI_CHANPRESSURE`](#group__defines_1gaeb3281cc7fcd0daade8ed3d2dfc33dbe) {#group__defines_1gaeb3281cc7fcd0daade8ed3d2dfc33dbe} - -#### `define `[`MIDI_CLOCK`](#group__defines_1gafa5e4e295aafd15ab7893344599b3b89) {#group__defines_1gafa5e4e295aafd15ab7893344599b3b89} - -#### `define `[`MIDI_TICK`](#group__defines_1ga3b99408ff864613765d4c3c2ceb52aa7) {#group__defines_1ga3b99408ff864613765d4c3c2ceb52aa7} - -#### `define `[`MIDI_START`](#group__defines_1ga8233631c85823aa546f932ad8975caa4) {#group__defines_1ga8233631c85823aa546f932ad8975caa4} - -#### `define `[`MIDI_CONTINUE`](#group__defines_1gab24430f0081e27215b0da84dd0ee745c) {#group__defines_1gab24430f0081e27215b0da84dd0ee745c} - -#### `define `[`MIDI_STOP`](#group__defines_1ga3af9271d4b1f0d22904a0b055f48cf62) {#group__defines_1ga3af9271d4b1f0d22904a0b055f48cf62} - -#### `define `[`MIDI_ACTIVESENSE`](#group__defines_1gacd88ed42dba52bb4b2052c5656362677) {#group__defines_1gacd88ed42dba52bb4b2052c5656362677} - -#### `define `[`MIDI_RESET`](#group__defines_1ga02947f30ca62dc332fdeb10c5868323b) {#group__defines_1ga02947f30ca62dc332fdeb10c5868323b} - -#### `define `[`MIDI_TC_QUARTERFRAME`](#group__defines_1gaaa072f33590e236d1bfd8f28e833ae31) {#group__defines_1gaaa072f33590e236d1bfd8f28e833ae31} - -#### `define `[`MIDI_SONGPOSITION`](#group__defines_1ga412f6ed33a2150051374bee334ee1705) {#group__defines_1ga412f6ed33a2150051374bee334ee1705} - -#### `define `[`MIDI_SONGSELECT`](#group__defines_1gafcab254838b028365ae0259729e72c4e) {#group__defines_1gafcab254838b028365ae0259729e72c4e} - -#### `define `[`MIDI_TUNEREQUEST`](#group__defines_1ga8100b907b8c0a84e58b1c53dcd9bd795) {#group__defines_1ga8100b907b8c0a84e58b1c53dcd9bd795} - -#### `define `[`SYSEX_EDUMANUFID`](#group__defines_1ga5ef855ed955b00a2239ca16afbeb164f) {#group__defines_1ga5ef855ed955b00a2239ca16afbeb164f} - diff --git a/docs/ja/internals_input_callback_reg.md b/docs/ja/internals_input_callback_reg.md deleted file mode 100644 index 864b1d5750..0000000000 --- a/docs/ja/internals_input_callback_reg.md +++ /dev/null @@ -1,173 +0,0 @@ -# group `input_callback_reg` {#group__input__callback__reg} - -<!--- - original document: 0.9.34:docs/internals_input_callback_reg.md - git diff 0.9.34 HEAD -- docs/internals_input_callback_reg.md | cat ---> - -これらは受信コールバックを登録するために使用する関数です。 - -関数は、適切な midi メッセージが関連するデバイスの入力と一致した場合に呼び出されます。 - -## 概要 - -| メンバー | 説明 | ---------------------------------|--------------------------------------------- -| `public void `[`midi_register_cc_callback`](#group__input__callback__reg_1ga64ab672abbbe393c9c4a83110c8df718)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_three_byte_func_t func)` | コントロールチェンジメッセージ受信コールバックを登録する。 | -| `public void `[`midi_register_noteon_callback`](#group__input__callback__reg_1ga3962f276c17618923f1152779552103e)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_three_byte_func_t func)` | ノートオン受信コールバックを登録する。 | -| `public void `[`midi_register_noteoff_callback`](#group__input__callback__reg_1gac847b66051bd6d53b762958be0ec4c6d)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_three_byte_func_t func)` | ノートオフ受信コールバックを登録する。 | -| `public void `[`midi_register_aftertouch_callback`](#group__input__callback__reg_1gaa95bc901bd9edff956a667c9a69dd01f)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_three_byte_func_t func)` | アフタータッチ受信コールバックを登録する。 | -| `public void `[`midi_register_pitchbend_callback`](#group__input__callback__reg_1ga071a28f02ba14f53de219be70ebd9a48)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_three_byte_func_t func)` | ピッチベンド受信コールバックを登録する。 | -| `public void `[`midi_register_songposition_callback`](#group__input__callback__reg_1gaf2adfd79637f3553d8f26deb1ca22ed6)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_three_byte_func_t func)` | ソングポジション受信コールバックを登録する。 | -| `public void `[`midi_register_progchange_callback`](#group__input__callback__reg_1gae6ba1a35a4cde9bd15dd42f87401d127)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_two_byte_func_t func)` | プログラムチェンジ受信コールバックを登録する。 | -| `public void `[`midi_register_chanpressure_callback`](#group__input__callback__reg_1ga39b31f1f4fb93917ce039b958f21b4f5)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_two_byte_func_t func)` | チャンネルプレッシャー受信コールバックを登録する。 | -| `public void `[`midi_register_songselect_callback`](#group__input__callback__reg_1gaf9aafc76a2dc4b9fdbb4106cbda6ce72)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_two_byte_func_t func)` | ソングセレクト受信コールバックを登録する。 | -| `public void `[`midi_register_tc_quarterframe_callback`](#group__input__callback__reg_1ga0a119fada2becc628cb15d753b257e6e)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_two_byte_func_t func)` | タイムコードクォータフレーム受信コールバックを登録する。 | -| `public void `[`midi_register_realtime_callback`](#group__input__callback__reg_1ga764f440e857b89084b1a07f9da2ff93a)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_one_byte_func_t func)` | リアルタイム受信コールバックを登録する。 | -| `public void `[`midi_register_tunerequest_callback`](#group__input__callback__reg_1gae40ff3ce20bda79fef87da24b8321cb1)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_one_byte_func_t func)` | チューンリクエスト受信コールバックを登録する。 | -| `public void `[`midi_register_sysex_callback`](#group__input__callback__reg_1ga63ce9631b025785c1848d0122d4c4c48)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_sysex_func_t func)` | システムエクスクルーシブ受信コールバックを登録する。 | -| `public void `[`midi_register_fallthrough_callback`](#group__input__callback__reg_1ga7ed189164aa9682862b3181153afbd94)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_var_byte_func_t func)` | フォールスルー受信コールバックを登録する。 | -| `public void `[`midi_register_catchall_callback`](#group__input__callback__reg_1ga9dbfed568d047a6cd05708f11fe39e99)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_var_byte_func_t func)` | キャッチオール受信コールバックを登録する。 | - -## メンバー - -#### `public void `[`midi_register_cc_callback`](#group__input__callback__reg_1ga64ab672abbbe393c9c4a83110c8df718)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_three_byte_func_t func)` {#group__input__callback__reg_1ga64ab672abbbe393c9c4a83110c8df718} - -コントロールチェンジメッセージ受信コールバックを登録する。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_noteon_callback`](#group__input__callback__reg_1ga3962f276c17618923f1152779552103e)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_three_byte_func_t func)` {#group__input__callback__reg_1ga3962f276c17618923f1152779552103e} - -ノートオン受信コールバックを登録する。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_noteoff_callback`](#group__input__callback__reg_1gac847b66051bd6d53b762958be0ec4c6d)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_three_byte_func_t func)` {#group__input__callback__reg_1gac847b66051bd6d53b762958be0ec4c6d} - -ノートオフ受信コールバックを登録する。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_aftertouch_callback`](#group__input__callback__reg_1gaa95bc901bd9edff956a667c9a69dd01f)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_three_byte_func_t func)` {#group__input__callback__reg_1gaa95bc901bd9edff956a667c9a69dd01f} - -アフタータッチ受信コールバックを登録する。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_pitchbend_callback`](#group__input__callback__reg_1ga071a28f02ba14f53de219be70ebd9a48)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_three_byte_func_t func)` {#group__input__callback__reg_1ga071a28f02ba14f53de219be70ebd9a48} - -ピッチベンド受信コールバックを登録する。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_songposition_callback`](#group__input__callback__reg_1gaf2adfd79637f3553d8f26deb1ca22ed6)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_three_byte_func_t func)` {#group__input__callback__reg_1gaf2adfd79637f3553d8f26deb1ca22ed6} - -ソングポジション受信コールバックを登録する。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_progchange_callback`](#group__input__callback__reg_1gae6ba1a35a4cde9bd15dd42f87401d127)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_two_byte_func_t func)` {#group__input__callback__reg_1gae6ba1a35a4cde9bd15dd42f87401d127} - -プログラムチェンジ受信コールバックを登録する。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_chanpressure_callback`](#group__input__callback__reg_1ga39b31f1f4fb93917ce039b958f21b4f5)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_two_byte_func_t func)` {#group__input__callback__reg_1ga39b31f1f4fb93917ce039b958f21b4f5} - -チャンネルプレッシャー受信コールバックを登録する。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_songselect_callback`](#group__input__callback__reg_1gaf9aafc76a2dc4b9fdbb4106cbda6ce72)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_two_byte_func_t func)` {#group__input__callback__reg_1gaf9aafc76a2dc4b9fdbb4106cbda6ce72} - -ソングセレクト受信コールバックを登録する。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_tc_quarterframe_callback`](#group__input__callback__reg_1ga0a119fada2becc628cb15d753b257e6e)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_two_byte_func_t func)` {#group__input__callback__reg_1ga0a119fada2becc628cb15d753b257e6e} - -タイムコードクォータフレーム受信コールバックを登録する。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_realtime_callback`](#group__input__callback__reg_1ga764f440e857b89084b1a07f9da2ff93a)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_one_byte_func_t func)` {#group__input__callback__reg_1ga764f440e857b89084b1a07f9da2ff93a} - -リアルタイム受信コールバックを登録する。 - -全てのリアルタイムメッセージ型に対してコールバックが呼ばれます。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_tunerequest_callback`](#group__input__callback__reg_1gae40ff3ce20bda79fef87da24b8321cb1)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_one_byte_func_t func)` {#group__input__callback__reg_1gae40ff3ce20bda79fef87da24b8321cb1} - -チューンリクエスト受信コールバックを登録する。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_sysex_callback`](#group__input__callback__reg_1ga63ce9631b025785c1848d0122d4c4c48)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_sysex_func_t func)` {#group__input__callback__reg_1ga63ce9631b025785c1848d0122d4c4c48} - -システムエクスクルーシブ受信コールバックを登録する。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_fallthrough_callback`](#group__input__callback__reg_1ga7ed189164aa9682862b3181153afbd94)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_var_byte_func_t func)` {#group__input__callback__reg_1ga7ed189164aa9682862b3181153afbd94} - -フォールスルー受信コールバックを登録する。 - -より具体的なコールバックが見つからない場合にのみ呼ばれます。例えば、ノートオン受信コールバックを登録していないがノートオンメッセージを受け取った場合、フォールスルー受信コールバックが登録されている場合はそれが呼ばれます。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 - -#### `public void `[`midi_register_catchall_callback`](#group__input__callback__reg_1ga9dbfed568d047a6cd05708f11fe39e99)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_var_byte_func_t func)` {#group__input__callback__reg_1ga9dbfed568d047a6cd05708f11fe39e99} - -キャッチオール受信コールバックを登録する。 - -登録されている場合は、より具体的なコールバックあるいはフォールスルー受信コールバックが登録されている場合でも、一致する全てのメッセージに対してキャッチオール受信コールバックが呼ばれます。 - -#### パラメータ -* `device` 関連するデバイス - -* `func` 登録するコールバック関数 diff --git a/docs/ja/internals_midi_device.md b/docs/ja/internals_midi_device.md deleted file mode 100644 index 6adc2d5ad9..0000000000 --- a/docs/ja/internals_midi_device.md +++ /dev/null @@ -1,148 +0,0 @@ -# `midi_device` グループ {#group__midi__device} - -<!--- - original document: 0.10.9:docs/internals_midi_device.md - git diff 0.10.9 HEAD -- docs/internals_midi_device.md | cat ---> - -独自の MIDI デバイスを実装する時に、関数を使います。 - -実際にデバイスを介してバイトを送信するために、送信関数を設定します。このメソッドは、このデバイスで例えば midi_send_cc のような送信関数を呼ぶ時に呼ばれます。 - -midi_device_input を使ってデバイスからの入力データを処理し、それをデバイスに関連付けられたコールバックで渡します。 - -デバイスのプロセス関数の最初に呼び出される関数が必要な場合、midi_device_set_pre_input_process_func を使います。通常、入力をポーリングして midi_device_input に渡します。 - -## 概要 - -メンバー | 説明 ---------------------------------|--------------------------------------------- -`define `[`MIDI_INPUT_QUEUE_LENGTH`](#group__midi__device_1ga4aaa419caebdca2bbdfc1331e79781a8) | -`enum `[`input_state_t`](#group__midi__device_1gac203e877d3df4275ceb8e7180a61f621) | -`public void `[`midi_device_input`](#group__midi__device_1gad8d3db8eb35d9cfa51ef036a0a9d70db)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t cnt,uint8_t * input)` | 入力バイトを処理します。この関数はバイトを解析し、指定されたデバイスに関連する適切なコールバックを呼びます。この関数は、カスタムデバイスを作成していて、MIDI 入力が必要な場合に使います。 -`public void `[`midi_device_set_send_func`](#group__midi__device_1ga59f5a46bdd4452f186cc73d9e96d4673)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_var_byte_func_t send_func)` | 出力データバイトの送信に使われるコールバック関数を設定します。これは、カスタムデバイスを作成している場合のみ使われます。ロックを気にすることなく様々な MIDI 送信関数を呼び出すことができるように、コールバック関数で割り込みを無効にすることができます。 -`public void `[`midi_device_set_pre_input_process_func`](#group__midi__device_1ga4de0841b87c04fc23cb56b6451f33b69)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_no_byte_func_t pre_process_func)` | midi_device_process 呼び出しの最初に呼ばれるコールバックを設定します。これは入力データをポーリングし、midi_device_input 関数を介してデータを送信できます。カスタムデバイスを作成している場合のみ、これを使う可能性があります。 -`struct `[`_midi_device`](docs/api_midi_device.md#struct__midi__device) | この構造体は、MIDI デバイスの入出力関数と処理データを表します。 - -## メンバー - -#### `define `[`MIDI_INPUT_QUEUE_LENGTH`](#group__midi__device_1ga4aaa419caebdca2bbdfc1331e79781a8) {#group__midi__device_1ga4aaa419caebdca2bbdfc1331e79781a8} - -#### `enum `[`input_state_t`](#group__midi__device_1gac203e877d3df4275ceb8e7180a61f621) {#group__midi__device_1gac203e877d3df4275ceb8e7180a61f621} - -値 | 説明 ---------------------------------|--------------------------------------------- -IDLE | -ONE_BYTE_MESSAGE | -TWO_BYTE_MESSAGE | -THREE_BYTE_MESSAGE | -SYSEX_MESSAGE | - -#### `public void `[`midi_device_input`](#group__midi__device_1gad8d3db8eb35d9cfa51ef036a0a9d70db)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t cnt,uint8_t * input)` {#group__midi__device_1gad8d3db8eb35d9cfa51ef036a0a9d70db} - -入力バイトを処理します。この関数はバイトを解析し、指定されたデバイスに関連する適切なコールバックを呼びます。この関数は、カスタムデバイスを作成していて、MIDI 入力が必要な場合に使います。 - -#### パラメータ -* `device` 入力を関連付ける MIDI デバイス - -* `cnt` 処理中のバイト数 - -* `input` 処理するバイトデータ - -#### `public void `[`midi_device_set_send_func`](#group__midi__device_1ga59f5a46bdd4452f186cc73d9e96d4673)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_var_byte_func_t send_func)` {#group__midi__device_1ga59f5a46bdd4452f186cc73d9e96d4673} - -出力データバイトの送信に使われるコールバック関数を設定します。これは、カスタムデバイスを作成している場合のみ使われます。ロックを気にすることなく様々な MIDI 送信関数を呼び出すことができるように、コールバック関数で割り込みを無効にすることができます。 - -#### パラメータ -* `device` このコールバックを関連付ける MIDI デバイス - -* `send_func` 送信を行うコールバック関数 - -#### `public void `[`midi_device_set_pre_input_process_func`](#group__midi__device_1ga4de0841b87c04fc23cb56b6451f33b69)`(`[`MidiDevice`](#struct__midi__device)` * device,midi_no_byte_func_t pre_process_func)` {#group__midi__device_1ga4de0841b87c04fc23cb56b6451f33b69} - -midi_device_process 呼び出しの最初に呼ばれるコールバックを設定します。これは入力データをポーリングし、midi_device_input 関数を介してデータを送信できます。カスタムデバイスを作成している場合のみ、これを使う可能性があります。 - -#### パラメータ -* `device` このコールバックを関連付ける MIDI デバイス - -* `midi_no_byte_func_t` 実際のコールバック関数 - -# `_midi_device` 構造体 {#struct__midi__device} - -この構造体は、MIDI デバイスの入出力関数と処理データを表します。 - -デバイスは、実際の物理デバイス [シリアルポート、USB ポート]、または仮想デバイスを表すことができます。この構造体を直接変更する必要はありません。 - -## 概要 - -| メンバー | 説明 ---------------------------------|--------------------------------------------- -`public midi_var_byte_func_t `[`send_func`](docs/api_midi_device.md#struct__midi__device_1a25d4c94b4bbccd5b98f1032b469f3ff9) | -`public midi_three_byte_func_t `[`input_cc_callback`](docs/api_midi_device.md#struct__midi__device_1a6da5236c1bc73877728df92d213a78d1) | -`public midi_three_byte_func_t `[`input_noteon_callback`](docs/api_midi_device.md#struct__midi__device_1aa10b15cf1a7fb825a5df0d2abbe34a1c) | -`public midi_three_byte_func_t `[`input_noteoff_callback`](docs/api_midi_device.md#struct__midi__device_1aaf290043078534d3a5a0ea4c840eba84) | -`public midi_three_byte_func_t `[`input_aftertouch_callback`](docs/api_midi_device.md#struct__midi__device_1acb0b4901c545cec4b28b126f2d8c315f) | -`public midi_three_byte_func_t `[`input_pitchbend_callback`](docs/api_midi_device.md#struct__midi__device_1a305fea672caeb996f2233bf8cd2bef18) | -`public midi_three_byte_func_t `[`input_songposition_callback`](docs/api_midi_device.md#struct__midi__device_1a5f3f13638b3fef3fc561ed1bf301d586) | -`public midi_two_byte_func_t `[`input_progchange_callback`](docs/api_midi_device.md#struct__midi__device_1adaf1da617c9a10a9dcad00ab1959d3da) | -`public midi_two_byte_func_t `[`input_chanpressure_callback`](docs/api_midi_device.md#struct__midi__device_1ab7ca2925c539915d43974eff604d85f7) | -`public midi_two_byte_func_t `[`input_songselect_callback`](docs/api_midi_device.md#struct__midi__device_1a89bed8a5a55376120cfc0a62b42f057f) | -`public midi_two_byte_func_t `[`input_tc_quarterframe_callback`](docs/api_midi_device.md#struct__midi__device_1ad9813e75d22e284f9f65a907d20600f0) | -`public midi_one_byte_func_t `[`input_realtime_callback`](docs/api_midi_device.md#struct__midi__device_1a9448eba4afb7e43650434748db3777be) | -`public midi_one_byte_func_t `[`input_tunerequest_callback`](docs/api_midi_device.md#struct__midi__device_1a0cb8fd53e00cf1d4202d4fa04d038e8d) | -`public midi_sysex_func_t `[`input_sysex_callback`](docs/api_midi_device.md#struct__midi__device_1afff9a0ce641762aaef24c1e6953ec9a2) | -`public midi_var_byte_func_t `[`input_fallthrough_callback`](docs/api_midi_device.md#struct__midi__device_1abb974ec6d734001b4a0e370f292be503) | -`public midi_var_byte_func_t `[`input_catchall_callback`](docs/api_midi_device.md#struct__midi__device_1aae0d535129d4fd650edc98eb3f7584f8) | -`public midi_no_byte_func_t `[`pre_input_process_callback`](docs/api_midi_device.md#struct__midi__device_1aeb0bb8923d66c23d874e177dc4265754) | -`public uint8_t `[`input_buffer`](docs/api_midi_device.md#struct__midi__device_1a7c5684857d6af4ebc4dc12da27bd6b2a) | -`public input_state_t `[`input_state`](docs/api_midi_device.md#struct__midi__device_1a69a687d2d1c449ec15a11c07a5722e39) | -`public uint16_t `[`input_count`](docs/api_midi_device.md#struct__midi__device_1a68dea8e7b6151e89c85c95caa612ee5d) | -`public uint8_t `[`input_queue_data`](docs/api_midi_device.md#struct__midi__device_1ada41de021135dc423abedcbb30f366ff) | -`public `[`byteQueue_t`](#structbyte_queue__t)` `[`input_queue`](#struct__midi__device_1a49c8538a8a02193c58e28a56eb695d8f) | - -## メンバー - -#### `public midi_var_byte_func_t `[`send_func`](docs/api_midi_device.md#struct__midi__device_1a25d4c94b4bbccd5b98f1032b469f3ff9) {#struct__midi__device_1a25d4c94b4bbccd5b98f1032b469f3ff9} - -#### `public midi_three_byte_func_t `[`input_cc_callback`](docs/api_midi_device.md#struct__midi__device_1a6da5236c1bc73877728df92d213a78d1) {#struct__midi__device_1a6da5236c1bc73877728df92d213a78d1} - -#### `public midi_three_byte_func_t `[`input_noteon_callback`](docs/api_midi_device.md#struct__midi__device_1aa10b15cf1a7fb825a5df0d2abbe34a1c) {#struct__midi__device_1aa10b15cf1a7fb825a5df0d2abbe34a1c} - -#### `public midi_three_byte_func_t `[`input_noteoff_callback`](docs/api_midi_device.md#struct__midi__device_1aaf290043078534d3a5a0ea4c840eba84) {#struct__midi__device_1aaf290043078534d3a5a0ea4c840eba84} - -#### `public midi_three_byte_func_t `[`input_aftertouch_callback`](docs/api_midi_device.md#struct__midi__device_1acb0b4901c545cec4b28b126f2d8c315f) {#struct__midi__device_1acb0b4901c545cec4b28b126f2d8c315f} - -#### `public midi_three_byte_func_t `[`input_pitchbend_callback`](docs/api_midi_device.md#struct__midi__device_1a305fea672caeb996f2233bf8cd2bef18) {#struct__midi__device_1a305fea672caeb996f2233bf8cd2bef18} - -#### `public midi_three_byte_func_t `[`input_songposition_callback`](docs/api_midi_device.md#struct__midi__device_1a5f3f13638b3fef3fc561ed1bf301d586) {#struct__midi__device_1a5f3f13638b3fef3fc561ed1bf301d586} - -#### `public midi_two_byte_func_t `[`input_progchange_callback`](docs/api_midi_device.md#struct__midi__device_1adaf1da617c9a10a9dcad00ab1959d3da) {#struct__midi__device_1adaf1da617c9a10a9dcad00ab1959d3da} - -#### `public midi_two_byte_func_t `[`input_chanpressure_callback`](docs/api_midi_device.md#struct__midi__device_1ab7ca2925c539915d43974eff604d85f7) {#struct__midi__device_1ab7ca2925c539915d43974eff604d85f7} - -#### `public midi_two_byte_func_t `[`input_songselect_callback`](docs/api_midi_device.md#struct__midi__device_1a89bed8a5a55376120cfc0a62b42f057f) {#struct__midi__device_1a89bed8a5a55376120cfc0a62b42f057f} - -#### `public midi_two_byte_func_t `[`input_tc_quarterframe_callback`](docs/api_midi_device.md#struct__midi__device_1ad9813e75d22e284f9f65a907d20600f0) {#struct__midi__device_1ad9813e75d22e284f9f65a907d20600f0} - -#### `public midi_one_byte_func_t `[`input_realtime_callback`](docs/api_midi_device.md#struct__midi__device_1a9448eba4afb7e43650434748db3777be) {#struct__midi__device_1a9448eba4afb7e43650434748db3777be} - -#### `public midi_one_byte_func_t `[`input_tunerequest_callback`](docs/api_midi_device.md#struct__midi__device_1a0cb8fd53e00cf1d4202d4fa04d038e8d) {#struct__midi__device_1a0cb8fd53e00cf1d4202d4fa04d038e8d} - -#### `public midi_sysex_func_t `[`input_sysex_callback`](docs/api_midi_device.md#struct__midi__device_1afff9a0ce641762aaef24c1e6953ec9a2) {#struct__midi__device_1afff9a0ce641762aaef24c1e6953ec9a2} - -#### `public midi_var_byte_func_t `[`input_fallthrough_callback`](docs/api_midi_device.md#struct__midi__device_1abb974ec6d734001b4a0e370f292be503) {#struct__midi__device_1abb974ec6d734001b4a0e370f292be503} - -#### `public midi_var_byte_func_t `[`input_catchall_callback`](docs/api_midi_device.md#struct__midi__device_1aae0d535129d4fd650edc98eb3f7584f8) {#struct__midi__device_1aae0d535129d4fd650edc98eb3f7584f8} - -#### `public midi_no_byte_func_t `[`pre_input_process_callback`](docs/api_midi_device.md#struct__midi__device_1aeb0bb8923d66c23d874e177dc4265754) {#struct__midi__device_1aeb0bb8923d66c23d874e177dc4265754} - -#### `public uint8_t `[`input_buffer`](docs/api_midi_device.md#struct__midi__device_1a7c5684857d6af4ebc4dc12da27bd6b2a) {#struct__midi__device_1a7c5684857d6af4ebc4dc12da27bd6b2a} - -#### `public input_state_t `[`input_state`](docs/api_midi_device.md#struct__midi__device_1a69a687d2d1c449ec15a11c07a5722e39) {#struct__midi__device_1a69a687d2d1c449ec15a11c07a5722e39} - -#### `public uint16_t `[`input_count`](docs/api_midi_device.md#struct__midi__device_1a68dea8e7b6151e89c85c95caa612ee5d) {#struct__midi__device_1a68dea8e7b6151e89c85c95caa612ee5d} - -#### `public uint8_t `[`input_queue_data`](docs/api_midi_device.md#struct__midi__device_1ada41de021135dc423abedcbb30f366ff) {#struct__midi__device_1ada41de021135dc423abedcbb30f366ff} - -#### `public `[`byteQueue_t`](#structbyte_queue__t)` `[`input_queue`](#struct__midi__device_1a49c8538a8a02193c58e28a56eb695d8f) {#struct__midi__device_1a49c8538a8a02193c58e28a56eb695d8f} - diff --git a/docs/ja/internals_midi_device_setup_process.md b/docs/ja/internals_midi_device_setup_process.md deleted file mode 100644 index 9806156452..0000000000 --- a/docs/ja/internals_midi_device_setup_process.md +++ /dev/null @@ -1,36 +0,0 @@ -# `midi_device_setup_process` グループ {#group__midi__device__setup__process} - -<!--- - original document: 0.10.9:docs/internals_midi_device_setup_process.md - git diff 0.10.9 HEAD -- docs/internals_midi_device_setup_process.md | cat ---> - -これらは、デバイスを初期化して実行するために使う必要があるメソッドです。 - -## 概要 - -メンバー | 説明 ---------------------------------|--------------------------------------------- -`public void `[`midi_device_init`](#group__midi__device__setup__process_1gaf29deddc94ea98a59daa0bde1aefd9d9)`(`[`MidiDevice`](#struct__midi__device)` * device)` | デバイスを初期化します。 -`public void `[`midi_device_process`](#group__midi__device__setup__process_1gaa3d5993d0e998a1b59bbf5ab9c7b492b)`(`[`MidiDevice`](#struct__midi__device)` * device)` | 入力データを処理します。 - -## メンバー - -#### `public void `[`midi_device_init`](#group__midi__device__setup__process_1gaf29deddc94ea98a59daa0bde1aefd9d9)`(`[`MidiDevice`](#struct__midi__device)` * device)` {#group__midi__device__setup__process_1gaf29deddc94ea98a59daa0bde1aefd9d9} - -デバイスを初期化します。 - -問題のデバイスを使う前にこれを呼び出す必要があります。 - -#### パラメータ -* `device` 初期化するデバイス - -#### `public void `[`midi_device_process`](#group__midi__device__setup__process_1gaa3d5993d0e998a1b59bbf5ab9c7b492b)`(`[`MidiDevice`](#struct__midi__device)` * device)` {#group__midi__device__setup__process_1gaa3d5993d0e998a1b59bbf5ab9c7b492b} - -入力データを処理します。 - -このメソッドは入力処理を駆動します。入力コールバックが呼び出されることが予想される場合は、このメソッドを頻繁に呼び出す必要があります。 - -#### パラメータ -* `device` 処理するデバイス - diff --git a/docs/ja/internals_midi_util.md b/docs/ja/internals_midi_util.md deleted file mode 100644 index 5ff9870df9..0000000000 --- a/docs/ja/internals_midi_util.md +++ /dev/null @@ -1,59 +0,0 @@ -# `midi_util` グループ {#group__midi__util} - -<!--- - original document: 0.10.9:docs/internals_midi_util.md - git diff 0.10.9 HEAD -- docs/internals_midi_util.md | cat ---> - -## 概要 - -| メンバー | 説明 ---------------------------------|--------------------------------------------- -| `enum `[`midi_packet_length_t`](#group__midi__util_1gae29ff56aee2b430ffe53933b97e5e79e) | 可能なパケット長の値の列挙型。 -| `public bool `[`midi_is_statusbyte`](#group__midi__util_1ga12e3b42ff9cbb4b4f2bc455fc8743ee5)`(uint8_t theByte)` | 指定されたバイトがステータスバイトであるかどうかを検査します。 -| `public bool `[`midi_is_realtime`](#group__midi__util_1gad2f52c363e34a8000d80c983c324e2d7)`(uint8_t theByte)` | 指定されたバイトがリアルタイムメッセージであるかどうかを検査します。 -| `public `[`midi_packet_length_t`](#group__midi__util_1gae29ff56aee2b430ffe53933b97e5e79e)` `[`midi_packet_length`](#group__midi__util_1gaa168b43af6ae9de0debce1625e4b8175)`(uint8_t status)` | 指定されたステータスバイトに関連付けられたパケットの長さを調べます。 - -## メンバー - -#### `enum `[`midi_packet_length_t`](#group__midi__util_1gae29ff56aee2b430ffe53933b97e5e79e) {#group__midi__util_1gae29ff56aee2b430ffe53933b97e5e79e} - -| 値 | 説明 ---------------------------------|--------------------------------------------- -UNDEFINED | -ONE | -TWO | -THREE | - -可能なパケット長の値の列挙型。 - -#### `public bool `[`midi_is_statusbyte`](#group__midi__util_1ga12e3b42ff9cbb4b4f2bc455fc8743ee5)`(uint8_t theByte)` {#group__midi__util_1ga12e3b42ff9cbb4b4f2bc455fc8743ee5} - -指定されたバイトがステータスバイトであるかどうかを検査します。 - -#### パラメータ -* `theByte` 検査するバイト - -#### 返り値 -指定されたバイトが MIDI ステータスバイトの場合は true - -#### `public bool `[`midi_is_realtime`](#group__midi__util_1gad2f52c363e34a8000d80c983c324e2d7)`(uint8_t theByte)` {#group__midi__util_1gad2f52c363e34a8000d80c983c324e2d7} - -指定されたバイトがリアルタイムメッセージであるかどうかを検査します。 - -#### パラメータ -* `theByte` 検査するバイト - -#### 返り値 -リアルタイムメッセージの場合は true、それ以外の場合は false - -#### `public `[`midi_packet_length_t`](#group__midi__util_1gae29ff56aee2b430ffe53933b97e5e79e)` `[`midi_packet_length`](#group__midi__util_1gaa168b43af6ae9de0debce1625e4b8175)`(uint8_t status)` {#group__midi__util_1gaa168b43af6ae9de0debce1625e4b8175} - -指定されたステータスバイトに関連付けられたパケットの長さを調べます。 - -#### パラメータ -* `status` ステータスバイト - -#### 返り値 -パケットの長さ。バイトがステータスバイトではない場合、あるいは sysex ステータスバイトの場合は、UNDEFINED を返します。 - diff --git a/docs/ja/internals_send_functions.md b/docs/ja/internals_send_functions.md deleted file mode 100644 index 2747d3997f..0000000000 --- a/docs/ja/internals_send_functions.md +++ /dev/null @@ -1,246 +0,0 @@ -# `send_functions` グループ {#group__send__functions} - -<!--- - original document: 0.10.9:docs/internals_send_functions.md - git diff 0.10.9 HEAD -- docs/internals_send_functions.md | cat ---> - -これらは、デバイスを介して MIDI データを送信するために使う関数です。 - -## 概要 - -メンバー | 説明 ---------------------------------|--------------------------------------------- -`public void `[`midi_send_cc`](#group__send__functions_1gaaf884811c92df405ca8fe1a00082f960)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,uint8_t num,uint8_t val)` | 指定されたデバイスを介して、コントロールチェンジメッセージを送信します。 -`public void `[`midi_send_noteon`](#group__send__functions_1ga467bcf46dbf03ec269ce565b46bc2775)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,uint8_t num,uint8_t vel)` | 指定されたデバイスを介してノートオンメッセージを送信します。 -`public void `[`midi_send_noteoff`](#group__send__functions_1gaedb7d8805425eef5d47d57ddcb4c7a49)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,uint8_t num,uint8_t vel)` | 指定されたデバイスを介してノートオフメッセージを送信します。 -`public void `[`midi_send_aftertouch`](#group__send__functions_1ga0014847571317a0e34b2ef46a6bc584f)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,uint8_t note_num,uint8_t amt)` | 指定されたデバイスを介してアフタータッチメッセージを送信します。 -`public void `[`midi_send_pitchbend`](#group__send__functions_1gae5a4a1e71611e7534be80af9ce3d3491)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,int16_t amt)` | 指定されたデバイスを介してピッチベンドメッセージを送信します。 -`public void `[`midi_send_programchange`](#group__send__functions_1ga7b15588ef25e5e1ff09c2afc3151ce86)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,uint8_t num)` | 指定されたデバイスを介してプログラムチェンジメッセージを送信します。 -`public void `[`midi_send_channelpressure`](#group__send__functions_1gaf23e69fdf812e89c0036f51f88ab2e1b)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,uint8_t amt)` | 指定されたデバイスを介してチャンネルプレッシャーメッセージを送信します。 -`public void `[`midi_send_clock`](#group__send__functions_1ga4e1b11a7cdb0875f6e03ce7c79c581aa)`(`[`MidiDevice`](#struct__midi__device)` * device)` | 指定されたデバイスを介してクロックメッセージを送信します。 -`public void `[`midi_send_tick`](#group__send__functions_1ga2b43c7d433d940c5b907595aac947972)`(`[`MidiDevice`](#struct__midi__device)` * device)` | 指定されたデバイスを介してティックメッセージを送信します。 -`public void `[`midi_send_start`](#group__send__functions_1ga1569749a8d58ccc56789289d7c7245cc)`(`[`MidiDevice`](#struct__midi__device)` * device)` | 指定されたデバイスを介してスタートメッセージを送信します。 -`public void `[`midi_send_continue`](#group__send__functions_1gaed5dc29d754a27372e89ab8bc20ee120)`(`[`MidiDevice`](#struct__midi__device)` * device)` | 指定されたデバイスを介してコンティニューメッセージを送信します。 -`public void `[`midi_send_stop`](#group__send__functions_1ga026e1a620276cb653ac501aa0d12a988)`(`[`MidiDevice`](#struct__midi__device)` * device)` | 指定されたデバイスを介してストップメッセージを送信します。 -`public void `[`midi_send_activesense`](#group__send__functions_1ga9b6e4c6ce4719d2604187b325620db37)`(`[`MidiDevice`](#struct__midi__device)` * device)` | 指定されたデバイスを介してアクティブセンスメッセージを送信します。 -`public void `[`midi_send_reset`](#group__send__functions_1ga3671e39a6d93ca9568fc493001af1b1b)`(`[`MidiDevice`](#struct__midi__device)` * device)` | 指定されたデバイスを介してリセットメッセージを送信します。 -`public void `[`midi_send_tcquarterframe`](#group__send__functions_1ga5b85639910eec280bb744c934d0fd45a)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t time)` | 指定されたデバイスを介してタイムコードクォータフレームメッセージを送信します。 -`public void `[`midi_send_songposition`](#group__send__functions_1gab1c9eeef3b57a8cd2e6128d18e85eb7f)`(`[`MidiDevice`](#struct__midi__device)` * device,uint16_t pos)` | 指定されたデバイスを介してソングポジションメッセージを送信します。 -`public void `[`midi_send_songselect`](#group__send__functions_1ga42de7838ba70d949af9a50f9facc3c50)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t song)` | 指定されたデバイスを介してソングセレクトメッセージを送信します。 -`public void `[`midi_send_tunerequest`](#group__send__functions_1ga8db6c7e04d48e4d2266dd59118ca0656)`(`[`MidiDevice`](#struct__midi__device)` * device)` | 指定されたデバイスを介してチューンリクエストメッセージを送信します。 -`public void `[`midi_send_byte`](#group__send__functions_1ga857e85eb90b288385642d4d991e09881)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t b)` | 指定されたデバイスを介してバイトを送信します。 -`public void `[`midi_send_data`](#group__send__functions_1ga36e2f2e45369d911b76969361679054b)`(`[`MidiDevice`](#struct__midi__device)` * device,uint16_t count,uint8_t byte0,uint8_t byte1,uint8_t byte2)` | 最大3バイトのデータを送信します。 -`public void `[`midi_send_array`](#group__send__functions_1ga245243cb1da18d2cea18d4b18d846ead)`(`[`MidiDevice`](#struct__midi__device)` * device,uint16_t count,uint8_t * array)` | フォーマットされた MIDI データの配列を送信します。 - -## メンバー - -#### `public void `[`midi_send_cc`](#group__send__functions_1gaaf884811c92df405ca8fe1a00082f960)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,uint8_t num,uint8_t val)` {#group__send__functions_1gaaf884811c92df405ca8fe1a00082f960} - -指定されたデバイスを介して、コントロールチェンジメッセージ(cc)を送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `chan` 送信するチャンネル、0-15 - -* `num` コントロールチェンジナンバー - -* `val` コントロールチェンジナンバーの値 - -#### `public void `[`midi_send_noteon`](#group__send__functions_1ga467bcf46dbf03ec269ce565b46bc2775)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,uint8_t num,uint8_t vel)` {#group__send__functions_1ga467bcf46dbf03ec269ce565b46bc2775} - -指定されたデバイスを介してノートオンメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `chan` 送信するチャンネル、0-15 - -* `num` ノート番号 - -* `vel` ノートベロシティ - -#### `public void `[`midi_send_noteoff`](#group__send__functions_1gaedb7d8805425eef5d47d57ddcb4c7a49)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,uint8_t num,uint8_t vel)` {#group__send__functions_1gaedb7d8805425eef5d47d57ddcb4c7a49} - -指定されたデバイスを介してノートオフメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `chan` 送信するチャンネル、0-15 - -* `num` ノート番号 - -* `vel` ノートベロシティ - -#### `public void `[`midi_send_aftertouch`](#group__send__functions_1ga0014847571317a0e34b2ef46a6bc584f)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,uint8_t note_num,uint8_t amt)` {#group__send__functions_1ga0014847571317a0e34b2ef46a6bc584f} - -指定されたデバイスを介してアフタータッチメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `chan` 送信するチャンネル、0-15 - -* `note_num` ノート番号 - -* `amt` アフタータッチ量 - -#### `public void `[`midi_send_pitchbend`](#group__send__functions_1gae5a4a1e71611e7534be80af9ce3d3491)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,int16_t amt)` {#group__send__functions_1gae5a4a1e71611e7534be80af9ce3d3491} - -指定されたデバイスを介してピッチベンドメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `chan` 送信するチャンネル、0-15 - -* `amt` ベンド量の範囲: -8192..8191、0 はベンドしないことを意味します - -#### `public void `[`midi_send_programchange`](#group__send__functions_1ga7b15588ef25e5e1ff09c2afc3151ce86)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,uint8_t num)` {#group__send__functions_1ga7b15588ef25e5e1ff09c2afc3151ce86} - -指定されたデバイスを介してプログラムチェンジメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `chan` 送信するチャンネル、0-15 - -* `num` 変更先のプログラム - -#### `public void `[`midi_send_channelpressure`](#group__send__functions_1gaf23e69fdf812e89c0036f51f88ab2e1b)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t chan,uint8_t amt)` {#group__send__functions_1gaf23e69fdf812e89c0036f51f88ab2e1b} - -指定されたデバイスを介してチャンネルプレッシャーメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `chan` 送信するチャンネル、0-15 - -* `amt` チャンネルプレッシャーの量 - -#### `public void `[`midi_send_clock`](#group__send__functions_1ga4e1b11a7cdb0875f6e03ce7c79c581aa)`(`[`MidiDevice`](#struct__midi__device)` * device)` {#group__send__functions_1ga4e1b11a7cdb0875f6e03ce7c79c581aa} - -指定されたデバイスを介してクロックメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -#### `public void `[`midi_send_tick`](#group__send__functions_1ga2b43c7d433d940c5b907595aac947972)`(`[`MidiDevice`](#struct__midi__device)` * device)` {#group__send__functions_1ga2b43c7d433d940c5b907595aac947972} - -指定されたデバイスを介してティックメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -#### `public void `[`midi_send_start`](#group__send__functions_1ga1569749a8d58ccc56789289d7c7245cc)`(`[`MidiDevice`](#struct__midi__device)` * device)` {#group__send__functions_1ga1569749a8d58ccc56789289d7c7245cc} - -指定されたデバイスを介してスタートメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -#### `public void `[`midi_send_continue`](#group__send__functions_1gaed5dc29d754a27372e89ab8bc20ee120)`(`[`MidiDevice`](#struct__midi__device)` * device)` {#group__send__functions_1gaed5dc29d754a27372e89ab8bc20ee120} - -指定されたデバイスを介してコンティニューメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -#### `public void `[`midi_send_stop`](#group__send__functions_1ga026e1a620276cb653ac501aa0d12a988)`(`[`MidiDevice`](#struct__midi__device)` * device)` {#group__send__functions_1ga026e1a620276cb653ac501aa0d12a988} - -指定されたデバイスを介してストップメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -#### `public void `[`midi_send_activesense`](#group__send__functions_1ga9b6e4c6ce4719d2604187b325620db37)`(`[`MidiDevice`](#struct__midi__device)` * device)` {#group__send__functions_1ga9b6e4c6ce4719d2604187b325620db37} - -指定されたデバイスを介してアクティブセンスメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -#### `public void `[`midi_send_reset`](#group__send__functions_1ga3671e39a6d93ca9568fc493001af1b1b)`(`[`MidiDevice`](#struct__midi__device)` * device)` {#group__send__functions_1ga3671e39a6d93ca9568fc493001af1b1b} - -指定されたデバイスを介してリセットメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -#### `public void `[`midi_send_tcquarterframe`](#group__send__functions_1ga5b85639910eec280bb744c934d0fd45a)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t time)` {#group__send__functions_1ga5b85639910eec280bb744c934d0fd45a} - -指定されたデバイスを介してタイムコードクォータフレームメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `time` このクォータフレームの時間。範囲は、0..16383 - -#### `public void `[`midi_send_songposition`](#group__send__functions_1gab1c9eeef3b57a8cd2e6128d18e85eb7f)`(`[`MidiDevice`](#struct__midi__device)` * device,uint16_t pos)` {#group__send__functions_1gab1c9eeef3b57a8cd2e6128d18e85eb7f} - -指定されたデバイスを介してソングポジションメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `pos` ソングポジション - -#### `public void `[`midi_send_songselect`](#group__send__functions_1ga42de7838ba70d949af9a50f9facc3c50)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t song)` {#group__send__functions_1ga42de7838ba70d949af9a50f9facc3c50} - -指定されたデバイスを介してソングセレクトメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `song` 選択するソング - -#### `public void `[`midi_send_tunerequest`](#group__send__functions_1ga8db6c7e04d48e4d2266dd59118ca0656)`(`[`MidiDevice`](#struct__midi__device)` * device)` {#group__send__functions_1ga8db6c7e04d48e4d2266dd59118ca0656} - -指定されたデバイスを介してチューンリクエストメッセージを送信します。 - -#### パラメータ -* `device` 送信に使うデバイス - -#### `public void `[`midi_send_byte`](#group__send__functions_1ga857e85eb90b288385642d4d991e09881)`(`[`MidiDevice`](#struct__midi__device)` * device,uint8_t b)` {#group__send__functions_1ga857e85eb90b288385642d4d991e09881} - -指定されたデバイスを介してバイトを送信します。 - -これは、指定された MIDI デバイスを介してデータを送信する一般的なメソッドです。これは、この API に実装されていない sysex データまたはメッセージがある場合、それらを送信するのに役立ちます。そのようなものを見つけた場合は、私たちがそれらを追加できるように、作者に連絡してください。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `b` 送信するバイト - -#### `public void `[`midi_send_data`](#group__send__functions_1ga36e2f2e45369d911b76969361679054b)`(`[`MidiDevice`](#struct__midi__device)` * device,uint16_t count,uint8_t byte0,uint8_t byte1,uint8_t byte2)` {#group__send__functions_1ga36e2f2e45369d911b76969361679054b} - -最大3バイトのデータを送信します。 - -これを使って sysex を通過できるように count に4の剰余が適用されます。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `count` 送信するバイト数、4の剰余が適用されます - -* `byte0` 最初のバイト - -* `byte1` 2番目のバイト。cnt % 4 != 2 の場合は無視されます - -* `byte2` 3番目のバイト。cnt % 4 != 3 の場合は無視されます - -#### `public void `[`midi_send_array`](#group__send__functions_1ga245243cb1da18d2cea18d4b18d846ead)`(`[`MidiDevice`](#struct__midi__device)` * device,uint16_t count,uint8_t * array)` {#group__send__functions_1ga245243cb1da18d2cea18d4b18d846ead} - -フォーマットされた MIDI データの配列を送信します。 - -sysex に使うことができます。 - -#### パラメータ -* `device` 送信に使うデバイス - -* `count` 送信するバイト数 - -* `array` バイトの配列 - diff --git a/docs/ja/internals_sysex_tools.md b/docs/ja/internals_sysex_tools.md deleted file mode 100644 index 629b4f2445..0000000000 --- a/docs/ja/internals_sysex_tools.md +++ /dev/null @@ -1,66 +0,0 @@ -# `sysex_tools` グループ {#group__sysex__tools} - -<!--- - original document: 0.10.9:docs/internals_sysex_tools.md - git diff 0.10.9 HEAD -- docs/internals_sysex_tools.md | cat ---> - -## 概要 - -| メンバー | 説明 ---------------------------------|--------------------------------------------- -| `public uint16_t `[`sysex_encoded_length`](#group__sysex__tools_1ga061e5607030412d6e62e2390d8013f0a)`(uint16_t decoded_length)` | エンコード後のメッセージの長さを計算します。 -| `public uint16_t `[`sysex_decoded_length`](#group__sysex__tools_1ga121fc227d3acc1c0ea08c9a5c26fa3b0)`(uint16_t encoded_length)` | デコード後のメッセージの長さを計算します。 -| `public uint16_t `[`sysex_encode`](#group__sysex__tools_1ga54d77f8d32f92a6f329daefa2b314742)`(uint8_t * encoded,const uint8_t * source,uint16_t length)` | sysex メッセージで安全に送信できるようにデータをエンコードします。 -| `public uint16_t `[`sysex_decode`](#group__sysex__tools_1gaaad1d9ba2d5eca709a0ab4ba40662229)`(uint8_t * decoded,const uint8_t * source,uint16_t length)` | エンコードされたデータをデコードします。 - -## メンバー - -#### `public uint16_t `[`sysex_encoded_length`](#group__sysex__tools_1ga061e5607030412d6e62e2390d8013f0a)`(uint16_t decoded_length)` {#group__sysex__tools_1ga061e5607030412d6e62e2390d8013f0a} - -エンコード後のメッセージの長さを計算します。 - -#### パラメータ -* `decoded_length` エンコードするメッセージの長さのバイト数。 - -#### 返り値 -エンコード後のメッセージの長さのバイト数。 - -#### `public uint16_t `[`sysex_decoded_length`](#group__sysex__tools_1ga121fc227d3acc1c0ea08c9a5c26fa3b0)`(uint16_t encoded_length)` {#group__sysex__tools_1ga121fc227d3acc1c0ea08c9a5c26fa3b0} - -デコード後のメッセージの長さを計算します。 - -#### パラメータ -* `encoded_length` エンコードされたメッセージの長さのバイト数。 - -#### 返り値 -デコードされた後のメッセージの長さのバイト数。 - -#### `public uint16_t `[`sysex_encode`](#group__sysex__tools_1ga54d77f8d32f92a6f329daefa2b314742)`(uint8_t * encoded,const uint8_t * source,uint16_t length)` {#group__sysex__tools_1ga54d77f8d32f92a6f329daefa2b314742} - -sysex メッセージで安全に送信できるようにデータをエンコードします。 - -#### パラメータ -* `encoded` 出力データバッファは、少なくとも sysex_encoded_length(length) バイトの長さが必要です。 - -* `source` エンコードされるデータの入力バッファ。 - -* `length` 入力バッファからエンコードするバイト数。 - -#### 返り値 -エンコードされたバイト数。 - -#### `public uint16_t `[`sysex_decode`](#group__sysex__tools_1gaaad1d9ba2d5eca709a0ab4ba40662229)`(uint8_t * decoded,const uint8_t * source,uint16_t length)` {#group__sysex__tools_1gaaad1d9ba2d5eca709a0ab4ba40662229} - -エンコードされたデータをデコードします。 - -#### パラメータ -* `decoded` 出力データバッファは、少なくとも sysex_decoded_length(length) バイトの長さが必要です。 - -* `source` デコードされるデータの入力バッファ。 - -* `length` 入力バッファからデコードするバイト数。 - -#### 返り値 -デコードされたバイト数。 - diff --git a/docs/ja/proton_c_conversion.md b/docs/ja/proton_c_conversion.md index 983aed4ee5..8f0c857cba 100644 --- a/docs/ja/proton_c_conversion.md +++ b/docs/ja/proton_c_conversion.md @@ -27,7 +27,7 @@ QMK で現在サポートされているキーボードが Pro Micro（または #endif ``` -`PORTB/DDRB` などが定義されていないというエラーが発生した場合は、ARM と AVR の両方で機能する [GPIO 制御](ja/internals_gpio_control.md) を使用するようにキーボードのコードを変換する必要があります。これは AVR ビルドにまったく影響を与えません。 +`PORTB/DDRB` などが定義されていないというエラーが発生した場合は、ARM と AVR の両方で機能する [GPIO 制御](ja/gpio_control.md) を使用するようにキーボードのコードを変換する必要があります。これは AVR ビルドにまったく影響を与えません。 Proton C には1つのオンボード LED(C13)しかなく、デフォルトでは TXLED(D5) がそれにマップされています。代わりに RXLED(B0) をそれにマッピングしたい場合は、`config.h` に次のように追加してください。 diff --git a/docs/proton_c_conversion.md b/docs/proton_c_conversion.md index 47511e1b1e..1e1b1e806d 100644 --- a/docs/proton_c_conversion.md +++ b/docs/proton_c_conversion.md @@ -20,7 +20,7 @@ This exposes the `CONVERT_TO_PROTON_C` flag that you can use in your code with ` #endif ``` -If you get errors about `PORTB/DDRB`, etc not being defined, so you'll need to convert the keyboard's code to use the [GPIO Controls](internals_gpio_control.md) that will work for both ARM and AVR. This shouldn't affect the AVR builds at all. +If you get errors about `PORTB/DDRB`, etc not being defined, so you'll need to convert the keyboard's code to use the [GPIO Controls](gpio_control.md) that will work for both ARM and AVR. This shouldn't affect the AVR builds at all. The Proton C only has one on-board LED (C13), and by default, the TXLED (D5) is mapped to it. If you want the RXLED (B0) mapped to it instead, add this like to your `config.h`: diff --git a/docs/zh-cn/_summary.md b/docs/zh-cn/_summary.md index 8a710a9ec1..dbad1021fa 100644 --- a/docs/zh-cn/_summary.md +++ b/docs/zh-cn/_summary.md @@ -146,7 +146,7 @@ * [EEPROM驱动](zh-cn/eeprom_driver.md) * [串口驱动](zh-cn/serial_driver.md) * [UART驱动](zh-cn/uart_driver.md) - * [操控GPIO](zh-cn/internals_gpio_control.md) + * [操控GPIO](zh-cn/gpio_control.md) * [键盘开发指引](zh-cn/hardware_keyboard_guidelines.md) * Python开发 @@ -182,12 +182,12 @@ * [了解QMK](zh-cn/understanding_qmk.md) * QMK内部细节 (编辑中) - * [定义](zh-cn/internals_defines.md) - * [输入回调的注册](zh-cn/internals_input_callback_reg.md) - * [Midi设备](zh-cn/internals_midi_device.md) - * [Midi设备驱动流程](zh-cn/internals_midi_device_setup_process.md) - * [Midi辅助功能](zh-cn/internals_midi_util.md) - * [发送函数](zh-cn/internals_send_functions.md) - * [Sysex工具](zh-cn/internals_sysex_tools.md) + * [定义](zh-cn/internals/defines.md) + * [输入回调的注册](zh-cn/internals/input_callback_reg.md) + * [Midi设备](zh-cn/internals/midi_device.md) + * [Midi设备驱动流程](zh-cn/internals/midi_device_setup_process.md) + * [Midi辅助功能](zh-cn/internals/midi_util.md) + * [发送函数](zh-cn/internals/send_functions.md) + * [Sysex工具](zh-cn/internals/sysex_tools.md) <!--fromen:20211014-12:00(GMT+8) commit 04cf161aa01fd433b5dae69d9fd31569ed5dca59--> diff --git a/keyboards/evyd13/wasdat/matrix.c b/keyboards/evyd13/wasdat/matrix.c index c97dd84694..60a1ea235a 100644 --- a/keyboards/evyd13/wasdat/matrix.c +++ b/keyboards/evyd13/wasdat/matrix.c @@ -24,27 +24,28 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; -/* col 0: C7 - * col 1: B6 - * col 2: C6 - * col 3: B4 - * col 4: B5 - * col 5: D7 +/* Columns 6-12 use a 74HC138 3-to-8 demultiplexer. * - * These columns use a 74HC138 3 to 8 bit demultiplexer. - * A2 A1 A0 - * col / pin: PD0 PD1 PD2 - * 6: 1 1 1 - * 7: 1 1 0 - * 8: 1 0 1 - * 9: 1 0 0 - * 10: 0 1 1 - * 11: 0 1 0 - * 12: 0 0 1 + * 0: C7 + * 1: B6 + * 2: C6 + * 3: B4 + * 4: B5 + * 5: D7 * - * col 13: D3 - * col 14: B7 - * col 15: B3 + * A2 A1 A0 + * D0 D1 D2 + * 6: 1 1 1 + * 7: 1 1 0 + * 8: 1 0 1 + * 9: 1 0 0 + * 10: 0 1 1 + * 11: 0 1 0 + * 12: 0 0 1 + * + * 13: D3 + * 14: B7 + * 15: B3 */ static void select_col(uint8_t col) { if (col_pins[col] != NO_PIN) { @@ -117,10 +118,10 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) } void matrix_init_custom(void) { - // initialize key pins - init_pins(); // initialize demultiplexer sn74x138_init(); + // initialize key pins + init_pins(); } bool matrix_scan_custom(matrix_row_t current_matrix[]) { diff --git a/keyboards/evyd13/wasdat_code/config.h b/keyboards/evyd13/wasdat_code/config.h index 6c39403e52..0a7b732010 100644 --- a/keyboards/evyd13/wasdat_code/config.h +++ b/keyboards/evyd13/wasdat_code/config.h @@ -41,22 +41,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * */ #define MATRIX_ROW_PINS { E6, C7, C6, B6, B5, B4, D7, D6 } -#define MATRIX_COL_PINS { } +#define MATRIX_COL_PINS { F7, F5, F6, F1, F4, F0, NO_PIN, D5, D3, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN } // Columns 6 and 9-15 controlled by demux #define UNUSED_PINS -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL +#define SN74X138_ADDRESS_PINS { D2, D1, D0 } +#define SN74X138_E3_PIN D4 // For QMK DFU #define QMK_ESC_OUTPUT E6 #define QMK_ESC_INPUT F0 #define QMK_LED B1 -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - #define LED_NUM_LOCK_PIN B3 #define LED_CAPS_LOCK_PIN B1 #define LED_SCROLL_LOCK_PIN B2 diff --git a/keyboards/evyd13/wasdat_code/matrix.c b/keyboards/evyd13/wasdat_code/matrix.c index 7844db7ab7..f30ea3355a 100644 --- a/keyboards/evyd13/wasdat_code/matrix.c +++ b/keyboards/evyd13/wasdat_code/matrix.c @@ -14,280 +14,70 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ + #include <stdint.h> #include <stdbool.h> -#include "wait.h" -#include "util.h" #include "matrix.h" -#include "debounce.h" #include "quantum.h" +#include "sn74x138.h" -#ifdef DIRECT_PINS -static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS; -#elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW) static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -//static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; -#endif - -// matrix code - -#ifdef DIRECT_PINS - -static void init_pins(void) { - for (int row = 0; row < MATRIX_ROWS; row++) { - for (int col = 0; col < MATRIX_COLS; col++) { - pin_t pin = direct_pins[row][col]; - if (pin != NO_PIN) { - setPinInputHigh(pin); - } - } - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - matrix_row_t last_row_value = current_matrix[current_row]; - current_matrix[current_row] = 0; - - for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - pin_t pin = direct_pins[current_row][col_index]; - if (pin != NO_PIN) { - current_matrix[current_row] |= readPin(pin) ? 0 : (MATRIX_ROW_SHIFTER << col_index); - } - } - - return (last_row_value != current_matrix[current_row]); -} - -#elif (DIODE_DIRECTION == COL2ROW) - -static void select_row(uint8_t row) { - setPinOutput(row_pins[row]); - writePinLow(row_pins[row]); -} - -static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); } - -static void unselect_rows(void) { - for (uint8_t x = 0; x < MATRIX_ROWS; x++) { - setPinInputHigh(row_pins[x]); - } -} - -static void init_pins(void) { - unselect_rows(); - for (uint8_t x = 0; x < MATRIX_COLS; x++) { - setPinInputHigh(col_pins[x]); - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[current_row]; - - // Clear data in matrix row - current_matrix[current_row] = 0; - - // Select row and wait for row selecton to stabilize - select_row(current_row); - wait_us(30); - - // For each col... - for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - - // Select the col pin to read (active low) - uint8_t pin_state = readPin(col_pins[col_index]); - - // Populate the matrix row with the state of the col pin - current_matrix[current_row] |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index); - } - - // Unselect row - unselect_row(current_row); - - return (last_row_value != current_matrix[current_row]); -} - -#elif (DIODE_DIRECTION == ROW2COL) - -/* Cols 0 - 15 - * col 0: F7 - * col 1: F5 - * col 2: F6 - * col 3: F1 - * col 4: F4 - * col 5: F0 - * These columns use a 74HC237D 3 to 8 bit demultiplexer. D4 is the enable pin, must be set high to use it. - * A0 A1 A2 - * col / pin: PD2 PD1 PD0 - * 6: 1 1 1 - * col 7: D3 - * col 8: B7 - * 9: 0 1 1 - * 10: 1 0 1 - * 11: 0 0 1 - * 12: 1 1 0 - * 13: 0 1 0 - * 14: 1 0 0 - * 15: 0 0 0 +static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* Columns 6 and 9-15 use a 74HC138 3-to-8 demultiplexer. + * D4 is the enable pin, must be set high to use it. + * + * 0: F7 + * 1: F5 + * 2: F6 + * 3: F1 + * 4: F4 + * 5: F0 + * + * A2 A1 A0 + * D0 D1 D2 + * 6: 1 1 1 + * + * 7: D5 + * 8: D3 + * + * 9: 1 1 0 + * 10: 1 0 1 + * 11: 1 0 0 + * 12: 0 1 1 + * 13: 0 1 0 + * 14: 0 0 1 + * 15: 0 0 0 */ static void select_col(uint8_t col) { - switch (col) { - case 0: - writePinLow(F7); - break; - case 1: - writePinLow(F5); - break; - case 2: - writePinLow(F6); - break; - case 3: - writePinLow(F1); - break; - case 4: - writePinLow(F4); - break; - case 5: - writePinLow(F0); - break; - case 6: - writePinHigh(D4); - writePinHigh(D2); - writePinHigh(D1); - writePinHigh(D0); - break; - case 7: - writePinLow(D5); - break; - case 8: - writePinLow(D3); - break; - case 9: - writePinHigh(D4); - writePinHigh(D1); - writePinHigh(D0); - break; - case 10: - writePinHigh(D4); - writePinHigh(D2); - writePinHigh(D0); - break; - case 11: - writePinHigh(D4); - writePinHigh(D0); - break; - case 12: - writePinHigh(D4); - writePinHigh(D2); - writePinHigh(D1); - break; - case 13: - writePinHigh(D4); - writePinHigh(D1); - break; - case 14: - writePinHigh(D4); - writePinHigh(D2); - break; - case 15: - writePinHigh(D4); - break; + if (col_pins[col] != NO_PIN) { + writePinLow(col_pins[col]); + } else { + sn74x138_set_addr((col == 6) ? 7 : 15 - col); + sn74x138_set_enabled(true); } } static void unselect_col(uint8_t col) { - switch (col) { - case 0: - writePinHigh(F7); - break; - case 1: - writePinHigh(F5); - break; - case 2: - writePinHigh(F6); - break; - case 3: - writePinHigh(F1); - break; - case 4: - writePinHigh(F4); - break; - case 5: - writePinHigh(F0); - break; - case 6: - writePinLow(D4); - writePinLow(D2); - writePinLow(D1); - writePinLow(D0); - break; - case 7: - writePinHigh(D5); - break; - case 8: - writePinHigh(D3); - break; - case 9: - writePinLow(D4); - writePinLow(D2); - writePinLow(D1); - writePinLow(D0); - break; - case 10: - writePinLow(D4); - writePinLow(D2); - writePinLow(D1); - writePinLow(D0); - break; - case 11: - writePinLow(D4); - writePinLow(D2); - writePinLow(D1); - writePinLow(D0); - break; - case 12: - writePinLow(D4); - writePinLow(D2); - writePinLow(D1); - writePinLow(D0); - break; - case 13: - writePinLow(D4); - writePinLow(D2); - writePinLow(D1); - writePinLow(D0); - break; - case 14: - writePinLow(D4); - writePinLow(D2); - writePinLow(D1); - writePinLow(D0); - break; - case 15: - writePinLow(D4); - writePinLow(D2); - writePinLow(D1); - writePinLow(D0); - break; + if (col_pins[col] != NO_PIN) { + setPinOutput(col_pins[col]); + writePinHigh(col_pins[col]); + } else { + sn74x138_set_enabled(false); } } static void unselect_cols(void) { - //Native - writePinHigh(F7); - writePinHigh(F5); - writePinHigh(F6); - writePinHigh(F1); - writePinHigh(F4); - writePinHigh(F0); - writePinHigh(D3); - writePinHigh(D5); + // Native + for (uint8_t x = 0; x < MATRIX_COLS; x++) { + if (col_pins[x] != NO_PIN) { + setPinOutput(col_pins[x]); + writePinHigh(col_pins[x]); + } + } - //Demultiplexer - writePinLow(D4); - writePinLow(D2); - writePinLow(D1); - writePinLow(D0); + // Demultiplexer + sn74x138_set_enabled(false); } static void init_pins(void) { @@ -295,27 +85,14 @@ static void init_pins(void) { for (uint8_t x = 0; x < MATRIX_ROWS; x++) { setPinInputHigh(row_pins[x]); } - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D2); - setPinOutput(D3); - setPinOutput(F7); - setPinOutput(F5); - setPinOutput(F6); - setPinOutput(F1); - setPinOutput(F4); - setPinOutput(F0); - setPinOutput(D3); - setPinOutput(D5); - setPinOutput(D4); } static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { bool matrix_changed = false; - // Select col and wait for col selecton to stabilize + // Select col and wait for col selection to stabilize select_col(current_col); - wait_us(30); + matrix_io_delay(); // For each row... for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) { @@ -343,9 +120,9 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) return matrix_changed; } -#endif - void matrix_init_custom(void) { + // initialize demultiplexer + sn74x138_init(); // initialize key pins init_pins(); } @@ -353,17 +130,10 @@ void matrix_init_custom(void) { bool matrix_scan_custom(matrix_row_t current_matrix[]) { bool changed = false; -#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) - // Set row, read cols - for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { - changed |= read_cols_on_row(current_matrix, current_row); - } -#elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { changed |= read_rows_on_col(current_matrix, current_col); } -#endif return changed; } diff --git a/keyboards/evyd13/wasdat_code/rules.mk b/keyboards/evyd13/wasdat_code/rules.mk index 6fd1fce10e..b37dfa459c 100644 --- a/keyboards/evyd13/wasdat_code/rules.mk +++ b/keyboards/evyd13/wasdat_code/rules.mk @@ -18,6 +18,7 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite -SRC += matrix.c +VPATH += drivers/gpio +SRC += matrix.c sn74x138.c LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso diff --git a/keyboards/handwired/wakizashi40/config.h b/keyboards/handwired/wakizashi40/config.h index 78f85f2197..e9976616ec 100644 --- a/keyboards/handwired/wakizashi40/config.h +++ b/keyboards/handwired/wakizashi40/config.h @@ -17,4 +17,3 @@ #pragma once #include "config_common.h" -#define DYNAMIC_KEYMAP_LAYER_COUNT 12 diff --git a/keyboards/handwired/wakizashi40/info.json b/keyboards/handwired/wakizashi40/info.json index b64ab55116..eed6dd9417 100644 --- a/keyboards/handwired/wakizashi40/info.json +++ b/keyboards/handwired/wakizashi40/info.json @@ -1,9 +1,9 @@ { - "manufacturer": "fumbucker", + "manufacturer": "xia0", "keyboard_name": "Wakizashi 40", - "maintainer": "fumbucker", + "maintainer": "xia0", "debounce": 5, - "processor": "at90usb1286", + "processor": "atmega32u4", "diode_direction": "COL2ROW", "features": { "audio": false, @@ -20,8 +20,8 @@ "unicode": false }, "matrix_pins": { - "cols": ["C5", "C4", "D2", "D3", "D4", "D5", "C6", "D7", "B0", "B1", "B2", "B3", "B4"], - "rows": ["C0", "C1", "C2", "C3"] + "cols": ["F4", "F6", "F7", "B1", "B3", "B2", "B6", "B5", "B4", "E6", "D7", "C6", "D4"], + "rows": ["D3", "D2", "D1", "D0"] }, "usb": { "device_ver": "0x0001", diff --git a/keyboards/handwired/wakizashi40/keymaps/via/keymap.c b/keyboards/handwired/wakizashi40/keymaps/via/keymap.c index d456b8b40a..fb9d37ac20 100644 --- a/keyboards/handwired/wakizashi40/keymaps/via/keymap.c +++ b/keyboards/handwired/wakizashi40/keymaps/via/keymap.c @@ -16,77 +16,27 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT_all( - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, LT(1, KC_SPC), LT(2, KC_SPC), KC_LALT, KC_MENU, KC_LCTL), - - [1] = LAYOUT_all( - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F5, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - MO(11), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), - - [2] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, - MO(11), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_QUOT, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), - - [3] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - [4] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - [5] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - [6] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - [7] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - [8] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - [9] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - [10] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - [11] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) - + [0] = LAYOUT_all( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, LT(1, KC_SPC), LT(2, KC_SPC), KC_LALT, KC_MENU, KC_LCTL), + + [1] = LAYOUT_all( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F5, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + MO(3), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; diff --git a/keyboards/handwired/wakizashi40/readme.md b/keyboards/handwired/wakizashi40/readme.md index d94a75651c..8bb6c2aebc 100644 --- a/keyboards/handwired/wakizashi40/readme.md +++ b/keyboards/handwired/wakizashi40/readme.md @@ -1,12 +1,12 @@ # Wakizashi 40 - + Reverse stagger 40% keyboard based on the Katana 60. -* Keyboard Maintainer: [fumbucker](https://github.com/xia0) -* Hardware Supported: Teensy2++ -* Hardware Availability: [thingiverse](https://www.thingiverse.com/thing:3467930) +* Keyboard Maintainer: [xia0](https://github.com/xia0) +* Hardware Supported: ATmega32u4 +* Hardware Availability: [prusaprinters.org](https://www.prusaprinters.org/prints/128575-wakizashi-40-keyboard) Make example for this keyboard (after setting up your build environment): @@ -16,4 +16,6 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) ## Bootloader -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (Capslock + R). +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/input_club/ergodox_infinity/mcuconf.h b/keyboards/input_club/ergodox_infinity/mcuconf.h index f6730b99ca..e4dfa75186 100644 --- a/keyboards/input_club/ergodox_infinity/mcuconf.h +++ b/keyboards/input_club/ergodox_infinity/mcuconf.h @@ -62,7 +62,7 @@ /* Need to redefine this, since the default is for K20x */ /* This is for Teensy LC; you should comment it out (or change to 5) * for Teensy 3.x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 +#define KINETIS_USB_USB0_IRQ_PRIORITY 5 /* * SPI driver system settings. diff --git a/keyboards/matrix/abelx/mcuconf.h b/keyboards/matrix/abelx/mcuconf.h index a22ce51c4c..a2fd42b8c4 100644 --- a/keyboards/matrix/abelx/mcuconf.h +++ b/keyboards/matrix/abelx/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -169,7 +169,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE diff --git a/keyboards/sowbug/68keys/config.h b/keyboards/sowbug/68keys/config.h index 0aad9a4574..0721302dbe 100644 --- a/keyboards/sowbug/68keys/config.h +++ b/keyboards/sowbug/68keys/config.h @@ -26,7 +26,6 @@ #define DEVICE_VER 0x0001 #define MANUFACTURER github.com/sowbug #define PRODUCT 68-key keyboard -#define DESCRIPTION A 68-key keyboard based on 68keys.io // key matrix size #define MATRIX_ROWS 5 diff --git a/keyboards/sowbug/ansi_tkl/config.h b/keyboards/sowbug/ansi_tkl/config.h index 505453b72b..44e82bbac7 100644 --- a/keyboards/sowbug/ansi_tkl/config.h +++ b/keyboards/sowbug/ansi_tkl/config.h @@ -26,7 +26,6 @@ #define DEVICE_VER 0x0001 #define MANUFACTURER github.com/sowbug #define PRODUCT ANSI TKL -#define DESCRIPTION A tenkeyless ANSI-layout keyboard // key matrix size #define MATRIX_ROWS 6 diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h index 7bd5b224df..597d287b07 100644 --- a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h +++ b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h @@ -23,7 +23,6 @@ #define DEVICE_VER 0x0001 #define MANUFACTURER Unicomp/Purdea Andrei #define PRODUCT Unicomp Spacesaver M -#define DESCRIPTION QMK firmware for the Unicomp Spacesaver M keyboard with a replacement Overnumpad controller #define SERIAL_NUMBER "purdea.ro:overnumpad_controller" /* key matrix size */ diff --git a/keyboards/xelus/ninjin/config.h b/keyboards/xelus/ninjin/config.h index cbaca37b5e..4dd40210a6 100644 --- a/keyboards/xelus/ninjin/config.h +++ b/keyboards/xelus/ninjin/config.h @@ -22,7 +22,6 @@ #define DEVICE_VER 0x0001 #define MANUFACTURER Xelus #define PRODUCT Ninjin -#define DESCRIPTION Ninjin /* key matrix size */ #define MATRIX_ROWS 6 diff --git a/lib/chibios b/lib/chibios -Subproject d7b9d1c87f724bd7c8cd1486d6d0dc3ba52e0d5 +Subproject 257302333c31f1f710800c2b97acf3550de043e diff --git a/lib/chibios-contrib b/lib/chibios-contrib -Subproject d1c2126d1cd867c50127da84425805e225df855 +Subproject ff1c6ec90cfc250d81e6f29a0d60a4faf2afb46 diff --git a/lib/python/qmk/cli/generate/api.py b/lib/python/qmk/cli/generate/api.py index 285bd90eb5..0596b3f22b 100755 --- a/lib/python/qmk/cli/generate/api.py +++ b/lib/python/qmk/cli/generate/api.py @@ -1,7 +1,7 @@ """This script automates the generation of the QMK API data. """ from pathlib import Path -from shutil import copyfile +import shutil import json from milc import cli @@ -12,28 +12,42 @@ from qmk.json_encoders import InfoJSONEncoder from qmk.json_schema import json_load from qmk.keyboard import find_readme, list_keyboards +TEMPLATE_PATH = Path('data/templates/api/') +BUILD_API_PATH = Path('.build/api_data/') + @cli.argument('-n', '--dry-run', arg_only=True, action='store_true', help="Don't write the data to disk.") +@cli.argument('-f', '--filter', arg_only=True, action='append', default=[], help="Filter the list of keyboards based on partial name matches the supplied value. May be passed multiple times.") @cli.subcommand('Creates a new keymap for the keyboard of your choosing', hidden=False if cli.config.user.developer else True) def generate_api(cli): """Generates the QMK API data. """ - api_data_dir = Path('api_data') - v1_dir = api_data_dir / 'v1' + if BUILD_API_PATH.exists(): + shutil.rmtree(BUILD_API_PATH) + + shutil.copytree(TEMPLATE_PATH, BUILD_API_PATH) + + v1_dir = BUILD_API_PATH / 'v1' keyboard_all_file = v1_dir / 'keyboards.json' # A massive JSON containing everything keyboard_list_file = v1_dir / 'keyboard_list.json' # A simple list of keyboard targets keyboard_aliases_file = v1_dir / 'keyboard_aliases.json' # A list of historical keyboard names and their new name keyboard_metadata_file = v1_dir / 'keyboard_metadata.json' # All the data configurator/via needs for initialization usb_file = v1_dir / 'usb.json' # A mapping of USB VID/PID -> keyboard target - if not api_data_dir.exists(): - api_data_dir.mkdir() + # Filter down when required + keyboard_list = list_keyboards() + if cli.args.filter: + kb_list = [] + for keyboard_name in keyboard_list: + if any(i in keyboard_name for i in cli.args.filter): + kb_list.append(keyboard_name) + keyboard_list = kb_list kb_all = {} usb_list = {} # Generate and write keyboard specific JSON files - for keyboard_name in list_keyboards(): + for keyboard_name in keyboard_list: kb_all[keyboard_name] = info_json(keyboard_name) keyboard_dir = v1_dir / 'keyboards' / keyboard_name keyboard_info = keyboard_dir / 'info.json' @@ -47,7 +61,7 @@ def generate_api(cli): cli.log.debug('Wrote file %s', keyboard_info) if keyboard_readme_src: - copyfile(keyboard_readme_src, keyboard_readme) + shutil.copyfile(keyboard_readme_src, keyboard_readme) cli.log.debug('Copied %s -> %s', keyboard_readme_src, keyboard_readme) if 'usb' in kb_all[keyboard_name]: diff --git a/lib/python/qmk/cli/generate/config_h.py b/lib/python/qmk/cli/generate/config_h.py index 24bbbdf517..340ed10436 100755 --- a/lib/python/qmk/cli/generate/config_h.py +++ b/lib/python/qmk/cli/generate/config_h.py @@ -82,7 +82,7 @@ def generate_config_items(kb_info_json, config_h_lines): for config_key, info_dict in info_config_map.items(): info_key = info_dict['info_key'] - key_type = info_dict.get('value_type', 'str') + key_type = info_dict.get('value_type', 'raw') to_config = info_dict.get('to_config', True) if not to_config: @@ -110,6 +110,11 @@ def generate_config_items(kb_info_json, config_h_lines): config_h_lines.append(f'#ifndef {key}') config_h_lines.append(f'# define {key} {value}') config_h_lines.append(f'#endif // {key}') + elif key_type == 'str': + config_h_lines.append('') + config_h_lines.append(f'#ifndef {config_key}') + config_h_lines.append(f'# define {config_key} "{config_value}"') + config_h_lines.append(f'#endif // {config_key}') elif key_type == 'bcd_version': (major, minor, revision) = config_value.split('.') config_h_lines.append('') @@ -200,7 +205,7 @@ def generate_config_h(cli): cli.args.output.parent.mkdir(parents=True, exist_ok=True) if cli.args.output.exists(): cli.args.output.replace(cli.args.output.parent / (cli.args.output.name + '.bak')) - cli.args.output.write_text(config_h) + cli.args.output.write_text(config_h, encoding='utf-8') if not cli.args.quiet: cli.log.info('Wrote info_config.h to %s.', cli.args.output) diff --git a/lib/python/qmk/cli/generate/docs.py b/lib/python/qmk/cli/generate/docs.py index 74112d834d..eb3099e138 100644 --- a/lib/python/qmk/cli/generate/docs.py +++ b/lib/python/qmk/cli/generate/docs.py @@ -10,6 +10,7 @@ DOCS_PATH = Path('docs/') BUILD_PATH = Path('.build/') BUILD_DOCS_PATH = BUILD_PATH / 'docs' DOXYGEN_PATH = BUILD_PATH / 'doxygen' +MOXYGEN_PATH = BUILD_DOCS_PATH / 'internals' @cli.subcommand('Build QMK documentation.', hidden=False if cli.config.user.developer else True) @@ -34,10 +35,10 @@ def generate_docs(cli): 'stdin': DEVNULL, } - cli.log.info('Generating internal docs...') + cli.log.info('Generating docs...') # Generate internal docs cli.run(['doxygen', 'Doxyfile'], **args) - cli.run(['moxygen', '-q', '-g', '-o', BUILD_DOCS_PATH / 'internals_%s.md', DOXYGEN_PATH / 'xml'], **args) + cli.run(['moxygen', '-q', '-g', '-o', MOXYGEN_PATH / '%s.md', DOXYGEN_PATH / 'xml'], **args) - cli.log.info('Successfully generated internal docs to %s.', BUILD_DOCS_PATH) + cli.log.info('Successfully generated docs to %s.', BUILD_DOCS_PATH) diff --git a/lib/python/qmk/cli/generate/rules_mk.py b/lib/python/qmk/cli/generate/rules_mk.py index ce824f6378..a1b10cc945 100755 --- a/lib/python/qmk/cli/generate/rules_mk.py +++ b/lib/python/qmk/cli/generate/rules_mk.py @@ -19,7 +19,7 @@ def process_mapping_rule(kb_info_json, rules_key, info_dict): return None info_key = info_dict['info_key'] - key_type = info_dict.get('value_type', 'str') + key_type = info_dict.get('value_type', 'raw') try: rules_value = kb_info_json[info_key] @@ -32,6 +32,8 @@ def process_mapping_rule(kb_info_json, rules_key, info_dict): return f'{rules_key} ?= {"yes" if rules_value else "no"}' elif key_type == 'mapping': return '\n'.join([f'{key} ?= {value}' for key, value in rules_value.items()]) + elif key_type == 'str': + return f'{rules_key} ?= "{rules_value}"' return f'{rules_key} ?= {rules_value}' diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index b86eaa059f..c399a9f321 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -411,7 +411,7 @@ def _extract_config_h(info_data): for config_key, info_dict in info_config_map.items(): info_key = info_dict['info_key'] - key_type = info_dict.get('value_type', 'str') + key_type = info_dict.get('value_type', 'raw') try: if config_key in config_c and info_dict.get('to_json', True): @@ -443,6 +443,9 @@ def _extract_config_h(info_data): elif key_type == 'int': dotty_info[info_key] = int(config_c[config_key]) + elif key_type == 'str': + dotty_info[info_key] = config_c[config_key].strip('"') + elif key_type == 'bcd_version': major = int(config_c[config_key][2:4]) minor = int(config_c[config_key][4]) @@ -491,7 +494,7 @@ def _extract_rules_mk(info_data): for rules_key, info_dict in info_rules_map.items(): info_key = info_dict['info_key'] - key_type = info_dict.get('value_type', 'str') + key_type = info_dict.get('value_type', 'raw') try: if rules_key in rules and info_dict.get('to_json', True): @@ -523,6 +526,9 @@ def _extract_rules_mk(info_data): elif key_type == 'int': dotty_info[info_key] = int(rules[rules_key]) + elif key_type == 'str': + dotty_info[info_key] = rules[rules_key].strip('"') + else: dotty_info[info_key] = rules[rules_key] diff --git a/lib/python/qmk/tests/test_cli_commands.py b/lib/python/qmk/tests/test_cli_commands.py index 55e69175e6..d40d4bf573 100644 --- a/lib/python/qmk/tests/test_cli_commands.py +++ b/lib/python/qmk/tests/test_cli_commands.py @@ -244,7 +244,7 @@ def test_clean(): def test_generate_api(): - result = check_subcommand('generate-api', '--dry-run') + result = check_subcommand('generate-api', '--dry-run', '--filter', 'handwired/pytest') check_returncode(result) @@ -259,7 +259,7 @@ def test_generate_config_h(): result = check_subcommand('generate-config-h', '-kb', 'handwired/pytest/basic') check_returncode(result) assert '# define DEVICE_VER 0x0001' in result.stdout - assert '# define DESCRIPTION handwired/pytest/basic' in result.stdout + assert '# define DESCRIPTION "handwired/pytest/basic"' in result.stdout assert '# define DIODE_DIRECTION COL2ROW' in result.stdout assert '# define MANUFACTURER none' in result.stdout assert '# define PRODUCT pytest' in result.stdout diff --git a/platforms/avr/platform.mk b/platforms/avr/platform.mk index 4d9cafaeef..9f304d2e20 100644 --- a/platforms/avr/platform.mk +++ b/platforms/avr/platform.mk @@ -18,6 +18,13 @@ COMPILEFLAGS += -ffunction-sections COMPILEFLAGS += -fdata-sections COMPILEFLAGS += -fpack-struct COMPILEFLAGS += -fshort-enums +COMPILEFLAGS += -mcall-prologues + +# Linker relaxation is only possible if +# link time optimizations are not enabled. +ifeq ($(strip $(LTO_ENABLE)), no) + COMPILEFLAGS += -mrelax +endif ASFLAGS += $(AVR_ASFLAGS) @@ -28,7 +35,7 @@ CFLAGS += -fno-strict-aliasing CXXFLAGS += $(COMPILEFLAGS) CXXFLAGS += -fno-exceptions -std=c++11 -LDFLAGS +=-Wl,--gc-sections +LDFLAGS += -Wl,--gc-sections OPT_DEFS += -DF_CPU=$(F_CPU)UL diff --git a/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h index c6f5a8ac52..e0af4a276b 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -186,7 +186,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h index 908a580a91..394e750256 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -86,6 +86,28 @@ #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 +#define STM32_IRQ_TIM8_BRK_TIM12_PRIORITY 7 +#define STM32_IRQ_TIM8_UP_TIM13_PRIORITY 7 +#define STM32_IRQ_TIM8_TRGCO_TIM14_PRIORITY 7 +#define STM32_IRQ_TIM8_CC_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_UART4_PRIORITY 12 +#define STM32_IRQ_UART5_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + /* * ADC driver system settings. */ @@ -137,21 +159,11 @@ #define STM32_GPT_USE_TIM7 FALSE #define STM32_GPT_USE_TIM8 FALSE #define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE #define STM32_GPT_USE_TIM11 FALSE #define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM13 FALSE #define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 /* * I2C driver system settings. @@ -199,13 +211,11 @@ #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM8 FALSE #define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE +#define STM32_ICU_USE_TIM12 FALSE +#define STM32_ICU_USE_TIM13 FALSE +#define STM32_ICU_USE_TIM14 FALSE /* * MAC driver system settings. @@ -221,7 +231,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -229,13 +238,11 @@ #define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM8 FALSE #define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE +#define STM32_PWM_USE_TIM12 FALSE +#define STM32_PWM_USE_TIM13 FALSE +#define STM32_PWM_USE_TIM14 FALSE /* * RTC driver system settings. @@ -265,12 +272,6 @@ #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE #define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 /* * SPI driver system settings. @@ -319,12 +320,6 @@ #define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) #define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART3_DMA_PRIORITY 0 diff --git a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h index 928ee56c71..07399ad2f7 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -86,6 +86,28 @@ #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 +#define STM32_IRQ_TIM8_BRK_TIM12_PRIORITY 7 +#define STM32_IRQ_TIM8_UP_TIM13_PRIORITY 7 +#define STM32_IRQ_TIM8_TRGCO_TIM14_PRIORITY 7 +#define STM32_IRQ_TIM8_CC_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_UART4_PRIORITY 12 +#define STM32_IRQ_UART5_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + /* * ADC driver system settings. */ @@ -137,21 +159,11 @@ #define STM32_GPT_USE_TIM7 FALSE #define STM32_GPT_USE_TIM8 FALSE #define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE #define STM32_GPT_USE_TIM11 FALSE #define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM13 FALSE #define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 /* * I2C driver system settings. @@ -199,13 +211,11 @@ #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM8 FALSE #define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE +#define STM32_ICU_USE_TIM12 FALSE +#define STM32_ICU_USE_TIM13 FALSE +#define STM32_ICU_USE_TIM14 FALSE /* * MAC driver system settings. @@ -221,7 +231,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -229,13 +238,11 @@ #define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM8 FALSE #define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE +#define STM32_PWM_USE_TIM12 FALSE +#define STM32_PWM_USE_TIM13 FALSE +#define STM32_PWM_USE_TIM14 FALSE /* * RTC driver system settings. @@ -265,12 +272,6 @@ #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE #define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 /* * SPI driver system settings. @@ -319,12 +320,6 @@ #define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) #define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART3_DMA_PRIORITY 0 diff --git a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h index d115028300..fd00280115 100644 --- a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -39,6 +39,7 @@ * HAL driver system settings. */ #define STM32_NO_INIT FALSE +#define STM32_CLOCK_DYNAMIC FALSE #define STM32_VOS STM32_VOS_RANGE1 #define STM32_PWR_BOOST TRUE #define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0) @@ -227,7 +228,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -240,6 +240,13 @@ /* * RTC driver system settings. */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_TAMP_CR1_INIT 0 +#define STM32_TAMP_CR2_INIT 0 +#define STM32_TAMP_FLTCR_INIT 0 +#define STM32_TAMP_IER_INIT 0 /* * SDC driver system settings. @@ -255,6 +262,15 @@ #define STM32_SERIAL_USE_LPUART1 FALSE /* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_USART3 FALSE +#define STM32_SIO_USE_UART4 FALSE +#define STM32_SIO_USE_LPUART1 FALSE + +/* * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE diff --git a/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h index 5710e2cb45..d6385da624 100644 --- a/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -41,6 +41,7 @@ * HAL driver system settings. */ #define STM32_NO_INIT FALSE +#define STM32_CLOCK_DYNAMIC FALSE #define STM32_VOS STM32_VOS_RANGE1 #define STM32_PWR_BOOST TRUE #define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0) @@ -274,7 +275,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -289,6 +289,13 @@ /* * RTC driver system settings. */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_TAMP_CR1_INIT 0 +#define STM32_TAMP_CR2_INIT 0 +#define STM32_TAMP_FLTCR_INIT 0 +#define STM32_TAMP_IER_INIT 0 /* * SDC driver system settings. @@ -305,6 +312,16 @@ #define STM32_SERIAL_USE_LPUART1 FALSE /* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_USART3 FALSE +#define STM32_SIO_USE_UART4 FALSE +#define STM32_SIO_USE_UART5 FALSE +#define STM32_SIO_USE_LPUART1 FALSE + +/* * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE @@ -383,5 +400,6 @@ */ #define STM32_WSPI_USE_QUADSPI1 FALSE #define STM32_WSPI_QUADSPI1_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_WSPI_QUADSPI1_PRESCALER_VALUE 1 #endif /* MCUCONF_H */ diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h index 2e37d95fe3..de5f85acdd 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h +++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h @@ -18,7 +18,4 @@ #include_next "board.h" #undef STM32L432xx - -// Pretend that we're an L443xx as the ChibiOS definitions for L4x2/L4x3 mistakenly don't enable GPIOH, I2C2, or SPI2. -// Until ChibiOS upstream is fixed, this should be kept at L443, as nothing in QMK currently utilises the crypto peripheral on the L443. -#define STM32L443xx +#define STM32L422xx diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h index fc9055ccfb..d67de4cfe2 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h @@ -18,8 +18,6 @@ /* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. */ -#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH - #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h index 8ad5a8da21..47f1598b74 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -32,12 +32,7 @@ #define MCUCONF_H #define STM32L4xx_MCUCONF -#define STM32L412_MCUCONF #define STM32L422_MCUCONF -#define STM32L432_MCUCONF -#define STM32L433_MCUCONF -#define STM32L442_MCUCONF -#define STM32L443_MCUCONF /* * HAL driver system settings. @@ -52,16 +47,13 @@ #define STM32_HSE_ENABLED FALSE #define STM32_LSE_ENABLED FALSE #define STM32_MSIPLL_ENABLED FALSE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_SAI1_CLOCK_ENABLED TRUE -#define STM32_SAI2_CLOCK_ENABLED TRUE #define STM32_MSIRANGE STM32_MSIRANGE_4M #define STM32_MSISRANGE STM32_MSISRANGE_4M #define STM32_SW STM32_SW_PLL #define STM32_PLLSRC STM32_PLLSRC_HSI16 #define STM32_PLLM_VALUE 4 #define STM32_PLLN_VALUE 80 +#define STM32_PLLPDIV_VALUE 0 #define STM32_PLLP_VALUE 7 #define STM32_PLLQ_VALUE 4 #define STM32_PLLR_VALUE 4 @@ -73,29 +65,22 @@ #define STM32_MCOPRE STM32_MCOPRE_DIV1 #define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK #define STM32_PLLSAI1N_VALUE 72 +#define STM32_PLLSAI1PDIV_VALUE 6 #define STM32_PLLSAI1P_VALUE 7 #define STM32_PLLSAI1Q_VALUE 6 #define STM32_PLLSAI1R_VALUE 6 -#define STM32_PLLSAI2N_VALUE 72 -#define STM32_PLLSAI2P_VALUE 7 -#define STM32_PLLSAI2R_VALUE 6 /* * Peripherals clock sources. */ #define STM32_USART1SEL STM32_USART1SEL_SYSCLK #define STM32_USART2SEL STM32_USART2SEL_SYSCLK -#define STM32_USART3SEL STM32_USART3SEL_SYSCLK -#define STM32_UART4SEL STM32_UART4SEL_SYSCLK -#define STM32_UART5SEL STM32_UART5SEL_SYSCLK #define STM32_LPUART1SEL STM32_LPUART1SEL_SYSCLK #define STM32_I2C1SEL STM32_I2C1SEL_SYSCLK -#define STM32_I2C2SEL STM32_I2C2SEL_SYSCLK #define STM32_I2C3SEL STM32_I2C3SEL_SYSCLK #define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1 #define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK1 #define STM32_SAI1SEL STM32_SAI1SEL_OFF -#define STM32_SAI2SEL STM32_SAI2SEL_OFF #define STM32_CLK48SEL STM32_CLK48SEL_HSI48 #define STM32_ADCSEL STM32_ADCSEL_SYSCLK #define STM32_SWPMI1SEL STM32_SWPMI1SEL_PCLK1 @@ -127,7 +112,6 @@ #define STM32_IRQ_USART1_PRIORITY 12 #define STM32_IRQ_USART2_PRIORITY 12 -#define STM32_IRQ_USART3_PRIORITY 12 #define STM32_IRQ_LPUART1_PRIORITY 12 /* @@ -137,29 +121,15 @@ #define STM32_ADC_USE_ADC1 FALSE #define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) #define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_ADC_ADC2_DMA_PRIORITY 2 #define STM32_ADC_ADC12_IRQ_PRIORITY 5 #define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 #define STM32_ADC_ADC123_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 #define STM32_ADC_ADC123_PRESC ADC_CCR_PRESC_DIV2 -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) /* * GPT driver system settings. @@ -198,7 +168,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM15 FALSE @@ -218,23 +187,22 @@ #define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_LPUART1 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_LPUART1_PRIORITY 12 + +/* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_LPUART1 FALSE /* * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI3 FALSE #define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) #define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 #define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 #define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") /* diff --git a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h index b1838b30a8..839d031ca4 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h @@ -2,9 +2,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later #pragma once -// Fixup equivalent usages within QMK as the base board definitions only go up to high -#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH - #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif diff --git a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h index 707134d49e..be64b04812 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -33,7 +33,6 @@ #define STM32L4xx_MCUCONF #define STM32L432_MCUCONF -#define STM32L433_MCUCONF /* * HAL driver system settings. @@ -183,7 +182,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM15 FALSE @@ -203,9 +201,13 @@ #define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_LPUART1 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_LPUART1_PRIORITY 12 + +/* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_LPUART1 FALSE /* * SPI driver system settings. diff --git a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h index fc9055ccfb..d67de4cfe2 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h @@ -18,8 +18,6 @@ /* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. */ -#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH - #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h index f812332960..cc10304a3f 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,27 @@ #define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_1_ +#define _CHIBIOS_RT_CONF_VER_7_0_ + +/*===========================================================================*/ +/** + * @name System settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Handling of instances. + * @note If enabled then threads assigned to various instances can + * interact each other using the same synchronization objects. + * If disabled then each OS instance is a separate world, no + * direct interactions are handled by the OS. + */ +#if !defined(CH_CFG_SMP_MODE) +#define CH_CFG_SMP_MODE FALSE +#endif + +/** @} */ /*===========================================================================*/ /** @@ -161,6 +181,16 @@ #endif /** + * @brief Time Stamps APIs. + * @details If enabled then the time stamps APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TIMESTAMP) +#define CH_CFG_USE_TIMESTAMP TRUE +#endif + +/** * @brief Threads registry APIs. * @details If enabled then the registry APIs are included in the kernel. * @@ -631,7 +661,7 @@ * @details User fields added to the end of the @p ch_system_t structure. */ #define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ + /* Add system custom fields here.*/ /** * @brief System initialization hook. @@ -639,7 +669,23 @@ * just before interrupts are enabled globally. */ #define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ + /* Add system initialization code here.*/ \ +} + +/** + * @brief OS instance structure extension. + * @details User fields added to the end of the @p os_instance_t structure. + */ +#define CH_CFG_OS_INSTANCE_EXTRA_FIELDS \ + /* Add OS instance custom fields here.*/ + +/** + * @brief OS instance initialization hook. + * + * @param[in] oip pointer to the @p os_instance_t structure + */ +#define CH_CFG_OS_INSTANCE_INIT_HOOK(oip) { \ + /* Add OS instance initialization code here.*/ \ } /** @@ -655,6 +701,8 @@ * * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. + * + * @param[in] tp pointer to the @p thread_t structure */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ /* Add threads initialization code here.*/ \ @@ -663,6 +711,8 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. + * + * @param[in] tp pointer to the @p thread_t structure */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -671,6 +721,9 @@ /** * @brief Context switch hook. * @details This hook is invoked just before switching between threads. + * + * @param[in] ntp thread being switched in + * @param[in] otp thread being switched out */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ /* Context switch code here.*/ \ @@ -745,6 +798,14 @@ /* Trace code here.*/ \ } +/** + * @brief Runtime Faults Collection Unit hook. + * @details This hook is invoked each time new faults are collected and stored. + */ +#define CH_CFG_RUNTIME_FAULTS_HOOK(mask) { \ + /* Faults handling code here.*/ \ +} + /** @} */ /*===========================================================================*/ diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h index d7a639a6d0..8367328a04 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,7 @@ #define HALCONF_H #define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_1_ +#define _CHIBIOS_HAL_CONF_VER_8_0_ #include <mcuconf.h> @@ -416,6 +416,26 @@ #endif /*===========================================================================*/ +/* SIO driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SIO_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SIO_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Support for thread synchronization API. + */ +#if !defined(SIO_USE_SYNCHRONIZATION) || defined(__DOXYGEN__) +#define SIO_USE_SYNCHRONIZATION TRUE +#endif + +/*===========================================================================*/ /* SERIAL_USB driver related setting. */ /*===========================================================================*/ @@ -451,11 +471,10 @@ #endif /** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. + * @brief Inserts an assertion on function errors before returning. */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE +#if !defined(SPI_USE_ASSERT_ON_ERROR) || defined(__DOXYGEN__) +#define SPI_USE_ASSERT_ON_ERROR TRUE #endif /** diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h index 4d7b586c08..cab4c29cf6 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -186,7 +186,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 TRUE diff --git a/platforms/chibios/boards/common/configs/chconf.h b/platforms/chibios/boards/common/configs/chconf.h index 18ad609ca1..5db836e37c 100644 --- a/platforms/chibios/boards/common/configs/chconf.h +++ b/platforms/chibios/boards/common/configs/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,27 @@ #define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_1_ +#define _CHIBIOS_RT_CONF_VER_7_0_ + +/*===========================================================================*/ +/** + * @name System settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Handling of instances. + * @note If enabled then threads assigned to various instances can + * interact each other using the same synchronization objects. + * If disabled then each OS instance is a separate world, no + * direct interactions are handled by the OS. + */ +#if !defined(CH_CFG_SMP_MODE) +#define CH_CFG_SMP_MODE FALSE +#endif + +/** @} */ /*===========================================================================*/ /** @@ -161,6 +181,16 @@ #endif /** + * @brief Time Stamps APIs. + * @details If enabled then the time stamps APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TIMESTAMP) +#define CH_CFG_USE_TIMESTAMP TRUE +#endif + +/** * @brief Threads registry APIs. * @details If enabled then the registry APIs are included in the kernel. * @@ -631,7 +661,7 @@ * @details User fields added to the end of the @p ch_system_t structure. */ #define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ + /* Add system custom fields here.*/ /** * @brief System initialization hook. @@ -639,7 +669,23 @@ * just before interrupts are enabled globally. */ #define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ + /* Add system initialization code here.*/ \ +} + +/** + * @brief OS instance structure extension. + * @details User fields added to the end of the @p os_instance_t structure. + */ +#define CH_CFG_OS_INSTANCE_EXTRA_FIELDS \ + /* Add OS instance custom fields here.*/ + +/** + * @brief OS instance initialization hook. + * + * @param[in] oip pointer to the @p os_instance_t structure + */ +#define CH_CFG_OS_INSTANCE_INIT_HOOK(oip) { \ + /* Add OS instance initialization code here.*/ \ } /** @@ -655,6 +701,8 @@ * * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. + * + * @param[in] tp pointer to the @p thread_t structure */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ /* Add threads initialization code here.*/ \ @@ -663,6 +711,8 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. + * + * @param[in] tp pointer to the @p thread_t structure */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -671,6 +721,9 @@ /** * @brief Context switch hook. * @details This hook is invoked just before switching between threads. + * + * @param[in] ntp thread being switched in + * @param[in] otp thread being switched out */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ /* Context switch code here.*/ \ @@ -745,6 +798,14 @@ /* Trace code here.*/ \ } +/** + * @brief Runtime Faults Collection Unit hook. + * @details This hook is invoked each time new faults are collected and stored. + */ +#define CH_CFG_RUNTIME_FAULTS_HOOK(mask) { \ + /* Faults handling code here.*/ \ +} + /** @} */ /*===========================================================================*/ diff --git a/platforms/chibios/boards/common/configs/halconf.h b/platforms/chibios/boards/common/configs/halconf.h index c80f67ee27..1805a77438 100644 --- a/platforms/chibios/boards/common/configs/halconf.h +++ b/platforms/chibios/boards/common/configs/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,7 @@ #define HALCONF_H #define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_1_ +#define _CHIBIOS_HAL_CONF_VER_8_0_ #include <mcuconf.h> @@ -416,6 +416,26 @@ #endif /*===========================================================================*/ +/* SIO driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SIO_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SIO_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Support for thread synchronization API. + */ +#if !defined(SIO_USE_SYNCHRONIZATION) || defined(__DOXYGEN__) +#define SIO_USE_SYNCHRONIZATION TRUE +#endif + +/*===========================================================================*/ /* SERIAL_USB driver related setting. */ /*===========================================================================*/ @@ -451,11 +471,10 @@ #endif /** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. + * @brief Inserts an assertion on function errors before returning. */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE +#if !defined(SPI_USE_ASSERT_ON_ERROR) || defined(__DOXYGEN__) +#define SPI_USE_ASSERT_ON_ERROR TRUE #endif /** diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c index 76191db165..01d8148875 100644 --- a/platforms/chibios/drivers/ws2812_spi.c +++ b/platforms/chibios/drivers/ws2812_spi.c @@ -139,7 +139,33 @@ void ws2812_init(void) { #endif // WS2812_SPI_SCK_PIN // TODO: more dynamic baudrate - static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR_CR1_BR_X}; + static const SPIConfig spicfg = { +#ifndef HAL_LLD_SELECT_SPI_V2 +// HAL_SPI_V1 +# if SPI_SUPPORTS_CIRCULAR == TRUE + WS2812_SPI_BUFFER_MODE, +# endif + NULL, // end_cb + PAL_PORT(RGB_DI_PIN), + PAL_PAD(RGB_DI_PIN), + WS2812_SPI_DIVISOR_CR1_BR_X, + 0 +#else + // HAL_SPI_V2 +# if SPI_SUPPORTS_CIRCULAR == TRUE + WS2812_SPI_BUFFER_MODE, +# endif +# if SPI_SUPPORTS_SLAVE_MODE == TRUE + false, +# endif + NULL, // data_cb + NULL, // error_cb + PAL_PORT(RGB_DI_PIN), + PAL_PAD(RGB_DI_PIN), + WS2812_SPI_DIVISOR_CR1_BR_X, + 0 +#endif + }; spiAcquireBus(&WS2812_SPI); /* Acquire ownership of the bus. */ spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters. */ diff --git a/platforms/chibios/flash.mk b/platforms/chibios/flash.mk index 6ee53172d2..a91ef2cf35 100644 --- a/platforms/chibios/flash.mk +++ b/platforms/chibios/flash.mk @@ -40,6 +40,18 @@ endef dfu-util: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter $(call EXEC_DFU_UTIL) +define EXEC_UF2_UTIL_DEPLOY + if ! $(UF2CONV) --deploy $(BUILD_DIR)/$(TARGET).uf2 2>/dev/null; then \ + printf "$(MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY)" ;\ + sleep $(BOOTLOADER_RETRY_TIME) ;\ + while ! $(UF2CONV) --deploy $(BUILD_DIR)/$(TARGET).uf2 2>/dev/null; do \ + printf "." ;\ + sleep $(BOOTLOADER_RETRY_TIME) ;\ + done ;\ + printf "\n" ;\ + fi +endef + # TODO: Remove once ARM has a way to configure EECONFIG_HANDEDNESS # within the emulated eeprom via dfu-util or another tool ifneq (,$(filter $(MAKECMDGOALS),dfu-util-split-left)) @@ -90,6 +102,8 @@ ifneq ($(strip $(PROGRAM_CMD)),) $(UNSYNC_OUTPUT_CMD) && $(PROGRAM_CMD) else ifeq ($(strip $(BOOTLOADER)),kiibohd) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL) +else ifeq ($(strip $(BOOTLOADER)),tinyuf2) + $(UNSYNC_OUTPUT_CMD) && $(call EXEC_UF2_UTIL_DEPLOY) else ifeq ($(strip $(MCU_FAMILY)),KINETIS) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_TEENSY) else ifeq ($(strip $(MCU_FAMILY)),MIMXRT1062) diff --git a/platforms/chibios/platform.mk b/platforms/chibios/platform.mk index 6fd1fd83f5..91dd0479bc 100644 --- a/platforms/chibios/platform.mk +++ b/platforms/chibios/platform.mk @@ -39,7 +39,6 @@ ifeq ($(strip $(MCU)), risc-v) STARTUP_MK = $(CHIBIOS_CONTRIB)/os/common/startup/RISCV-ECLIC/compilers/GCC/mk/startup_$(MCU_STARTUP).mk PORT_V = $(CHIBIOS_CONTRIB)/os/common/ports/RISCV-ECLIC/compilers/GCC/mk/port.mk RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/RISCV-ECLIC/compilers/GCC - PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/GD/GD32VF103/platform.mk else # ARM Support CHIBIOS_PORT ?= @@ -82,10 +81,15 @@ ifeq ("$(PLATFORM_NAME)","") PLATFORM_NAME = platform endif +# If no MCU port name was specified, use the family instead +ifeq ("$(MCU_PORT_NAME)","") + MCU_PORT_NAME = $(MCU_FAMILY) +endif + ifeq ("$(wildcard $(PLATFORM_MK))","") - PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk + PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)/$(PLATFORM_NAME).mk ifeq ("$(wildcard $(PLATFORM_MK))","") - PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk + PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)/$(PLATFORM_NAME).mk endif endif diff --git a/platforms/chibios/timer.c b/platforms/chibios/timer.c index e3bdfdcc37..5e01ea6372 100644 --- a/platforms/chibios/timer.c +++ b/platforms/chibios/timer.c @@ -40,7 +40,7 @@ static virtual_timer_t update_timer; # define UPDATE_INTERVAL (((sysinterval_t)1) << (CH_CFG_ST_RESOLUTION - 1)) // VT callback function to keep the overflow bits of the system tick counter updated. -static void update_fn(void *arg) { +static void update_fn(struct ch_virtual_timer *timer, void *arg) { (void)arg; chSysLockFromISR(); get_system_time_ticks(); diff --git a/platforms/chibios/wait.c b/platforms/chibios/wait.c index 56fd6ffcec..88cb5e6d54 100644 --- a/platforms/chibios/wait.c +++ b/platforms/chibios/wait.c @@ -31,7 +31,7 @@ void wait_us(uint16_t duration) { * Only use this timer on the main thread; * other threads need to use their own timer. */ - if (chThdGetSelfX() == &ch.mainthread && duration < (1ULL << (sizeof(gptcnt_t) * 8))) { + if (chThdGetSelfX() == &(currcore->mainthread) && duration < (1ULL << (sizeof(gptcnt_t) * 8))) { gptStart(&WAIT_US_TIMER, &gpt_cfg); gptPolledDelay(&WAIT_US_TIMER, duration); } else { diff --git a/quantum/process_keycode/process_unicode_common.c b/quantum/process_keycode/process_unicode_common.c index 46b77e14ba..2606ea1f37 100644 --- a/quantum/process_keycode/process_unicode_common.c +++ b/quantum/process_keycode/process_unicode_common.c @@ -16,8 +16,6 @@ #include "process_unicode_common.h" #include "eeprom.h" -#include <ctype.h> -#include <string.h> unicode_config_t unicode_config; uint8_t unicode_saved_mods; @@ -231,37 +229,6 @@ void register_unicode(uint32_t code_point) { unicode_input_finish(); } -// clang-format off - -void send_unicode_hex_string(const char *str) { - if (!str) { - return; - } - - while (*str) { - // Find the next code point (token) in the string - for (; *str == ' '; str++); // Skip leading spaces - size_t n = strcspn(str, " "); // Length of the current token - char code_point[n+1]; - strncpy(code_point, str, n); // Copy token into buffer - code_point[n] = '\0'; // Make sure it's null-terminated - - // Normalize the code point: make all hex digits lowercase - for (char *p = code_point; *p; p++) { - *p = tolower((unsigned char)*p); - } - - // Send the code point as a Unicode input string - unicode_input_start(); - send_string(code_point); - unicode_input_finish(); - - str += n; // Move to the first ' ' (or '\0') after the current token - } -} - -// clang-format on - // Borrowed from https://nullprogram.com/blog/2017/10/06/ static const char *decode_utf8(const char *str, int32_t *code_point) { const char *next; diff --git a/quantum/process_keycode/process_unicode_common.h b/quantum/process_keycode/process_unicode_common.h index 1a6607c757..8a4494c939 100644 --- a/quantum/process_keycode/process_unicode_common.h +++ b/quantum/process_keycode/process_unicode_common.h @@ -90,7 +90,6 @@ void register_hex(uint16_t hex); void register_hex32(uint32_t hex); void register_unicode(uint32_t code_point); -void send_unicode_hex_string(const char *str); void send_unicode_string(const char *str); bool process_unicode_common(uint16_t keycode, keyrecord_t *record); @@ -1,3 +1,7 @@ +# This is the `develop` branch! + +See the [Breaking Changes](https://docs.qmk.fm/#/breaking_changes) document for more information. + # Quantum Mechanical Keyboard Firmware [](https://github.com/qmk/qmk_firmware/tags) diff --git a/util/generate_internal_docs.sh b/util/generate_internal_docs.sh deleted file mode 100755 index b107a37ad6..0000000000 --- a/util/generate_internal_docs.sh +++ /dev/null @@ -1,31 +0,0 @@ -#!/usr/bin/env bash - -set -x - -if ! doxygen -v 2>&1 > /dev/null; then - echo "doxygen not found! Please install it!" - exit 1 -elif ! moxygen -V 2>&1 > /dev/null; then - echo -n "moxygen not found! Would you like to install it? [y/n] " - read ANSWER - case $ANSWER in - y|Y|yes|YES|Yes) - npm install -g moxygen - ;; - *) - exit 1 - ;; - esac -fi - -if [ ! -e Doxyfile ]; then - echo "Error: You must run this from the top-level qmk_firmware directory!" - exit 1 -fi - -# Generate the doxygen XML files -rm -rf doxygen -doxygen Doxyfile - -# Generate the moxygen Markdown files -moxygen -a -g -o docs/internals_%s.md doxygen/xml diff --git a/util/uf2conv.py b/util/uf2conv.py index 8677a828c9..fb82fd03ca 100755 --- a/util/uf2conv.py +++ b/util/uf2conv.py @@ -6,40 +6,13 @@ import re import os import os.path import argparse +import json UF2_MAGIC_START0 = 0x0A324655 # "UF2\n" UF2_MAGIC_START1 = 0x9E5D5157 # Randomly selected UF2_MAGIC_END = 0x0AB16F30 # Ditto -families = { - 'SAMD21': 0x68ed2b88, - 'SAML21': 0x1851780a, - 'SAMD51': 0x55114460, - 'NRF52': 0x1b57745f, - 'STM32F0': 0x647824b6, - 'STM32F1': 0x5ee21072, - 'STM32F2': 0x5d1a0a2e, - 'STM32F3': 0x6b846188, - 'STM32F4': 0x57755a57, - 'STM32F7': 0x53b80f00, - 'STM32G0': 0x300f5633, - 'STM32G4': 0x4c71240a, - 'STM32H7': 0x6db66082, - 'STM32L0': 0x202e3a91, - 'STM32L1': 0x1e1f432d, - 'STM32L4': 0x00ff6919, - 'STM32L5': 0x04240bdf, - 'STM32WB': 0x70d16653, - 'STM32WL': 0x21460ff0, - 'ATMEGA32': 0x16573617, - 'MIMXRT10XX': 0x4FB2D5BD, - 'LPC55': 0x2abc77ec, - 'GD32F350': 0x31D228C6, - 'ESP32S2': 0xbfdd4eee, - 'RP2040': 0xe48bff56 -} - INFO_FILE = "/INFO_UF2.TXT" appstartaddr = 0x2000 @@ -61,8 +34,13 @@ def is_hex(buf): def convert_from_uf2(buf): global appstartaddr + global familyid numblocks = len(buf) // 512 curraddr = None + currfamilyid = None + families_found = {} + prev_flag = None + all_flags_same = True outp = [] for blockno in range(numblocks): ptr = blockno * 512 @@ -78,9 +56,13 @@ def convert_from_uf2(buf): if datalen > 476: assert False, "Invalid UF2 data size at " + ptr newaddr = hd[3] - if curraddr is None: - appstartaddr = newaddr + if (hd[2] & 0x2000) and (currfamilyid == None): + currfamilyid = hd[7] + if curraddr == None or ((hd[2] & 0x2000) and hd[7] != currfamilyid): + currfamilyid = hd[7] curraddr = newaddr + if familyid == 0x0 or familyid == hd[7]: + appstartaddr = newaddr padding = newaddr - curraddr if padding < 0: assert False, "Block out of order at " + ptr @@ -91,8 +73,37 @@ def convert_from_uf2(buf): while padding > 0: padding -= 4 outp += b"\x00\x00\x00\x00" - outp.append(block[32 : 32 + datalen]) + if familyid == 0x0 or ((hd[2] & 0x2000) and familyid == hd[7]): + outp.append(block[32 : 32 + datalen]) curraddr = newaddr + datalen + if hd[2] & 0x2000: + if hd[7] in families_found.keys(): + if families_found[hd[7]] > newaddr: + families_found[hd[7]] = newaddr + else: + families_found[hd[7]] = newaddr + if prev_flag == None: + prev_flag = hd[2] + if prev_flag != hd[2]: + all_flags_same = False + if blockno == (numblocks - 1): + print("--- UF2 File Header Info ---") + families = load_families() + for family_hex in families_found.keys(): + family_short_name = "" + for name, value in families.items(): + if value == family_hex: + family_short_name = name + print("Family ID is {:s}, hex value is 0x{:08x}".format(family_short_name,family_hex)) + print("Target Address is 0x{:08x}".format(families_found[family_hex])) + if all_flags_same: + print("All block flag values consistent, 0x{:04x}".format(hd[2])) + else: + print("Flags were not all the same") + print("----------------------------") + if len(families_found) > 1 and familyid == 0x0: + outp = [] + appstartaddr = 0x0 return b"".join(outp) def convert_to_carray(file_content): @@ -166,12 +177,11 @@ def convert_from_hex_to_uf2(buf): upper = ((rec[4] << 8) | rec[5]) << 16 elif tp == 2: upper = ((rec[4] << 8) | rec[5]) << 4 - assert (upper & 0xffff) == 0 elif tp == 1: break elif tp == 0: - addr = upper | (rec[1] << 8) | rec[2] - if appstartaddr is None: + addr = upper + ((rec[1] << 8) | rec[2]) + if appstartaddr == None: appstartaddr = addr i = 4 while i < len(rec) - 1: @@ -215,7 +225,7 @@ def get_drives(): def has_info(d): try: return os.path.isfile(d + INFO_FILE) - except Exception: + except: return False return list(filter(has_info, drives)) @@ -238,10 +248,26 @@ def write_file(name, buf): print("Wrote %d bytes to %s" % (len(buf), name)) +def load_families(): + # The expectation is that the `uf2families.json` file is in the same + # directory as this script. Make a path that works using `__file__` + # which contains the full path to this script. + filename = "uf2families.json" + pathname = os.path.join(os.path.dirname(os.path.abspath(__file__)), filename) + with open(pathname) as f: + raw_families = json.load(f) + + families = {} + for family in raw_families: + families[family["short_name"]] = int(family["id"], 0) + + return families + + def main(): global appstartaddr, familyid def error(msg): - print(msg) + print(msg, file=sys.stderr) sys.exit(1) parser = argparse.ArgumentParser(description='Convert to UF2 or flash directly.') parser.add_argument('input', metavar='INPUT', type=str, nargs='?', @@ -264,9 +290,13 @@ def main(): help='specify familyID - number or name (default: 0x0)') parser.add_argument('-C' , '--carray', action='store_true', help='convert binary file to a C array, not UF2') + parser.add_argument('-i', '--info', action='store_true', + help='display header information from UF2, do not convert') args = parser.parse_args() appstartaddr = int(args.base, 0) + families = load_families() + if args.family.upper() in families: familyid = families[args.family.upper()] else: @@ -286,9 +316,12 @@ def main(): ext = "uf2" if args.deploy: outbuf = inpbuf - elif from_uf2: + elif from_uf2 and not args.info: outbuf = convert_from_uf2(inpbuf) ext = "bin" + elif from_uf2 and args.info: + outbuf = "" + convert_from_uf2(inpbuf) elif is_hex(inpbuf): outbuf = convert_from_hex_to_uf2(inpbuf.decode("utf-8")) elif args.carray: @@ -296,11 +329,12 @@ def main(): ext = "h" else: outbuf = convert_to_uf2(inpbuf) - print("Converting to %s, output size: %d, start address: 0x%x" % - (ext, len(outbuf), appstartaddr)) + if not args.deploy and not args.info: + print("Converted to %s, output size: %d, start address: 0x%x" % + (ext, len(outbuf), appstartaddr)) if args.convert or ext != "uf2": drives = [] - if args.output is None: + if args.output == None: args.output = "flash." + ext else: drives = get_drives() diff --git a/util/uf2families.json b/util/uf2families.json new file mode 100644 index 0000000000..fafae82a60 --- /dev/null +++ b/util/uf2families.json @@ -0,0 +1,192 @@ +[ + { + "id": "0x16573617", + "short_name": "ATMEGA32", + "description": "Microchip (Atmel) ATmega32" + }, + { + "id": "0x1851780a", + "short_name": "SAML21", + "description": "Microchip (Atmel) SAML21" + }, + { + "id": "0x1b57745f", + "short_name": "NRF52", + "description": "Nordic NRF52" + }, + { + "id": "0x1c5f21b0", + "short_name": "ESP32", + "description": "ESP32" + }, + { + "id": "0x1e1f432d", + "short_name": "STM32L1", + "description": "ST STM32L1xx" + }, + { + "id": "0x202e3a91", + "short_name": "STM32L0", + "description": "ST STM32L0xx" + }, + { + "id": "0x21460ff0", + "short_name": "STM32WL", + "description": "ST STM32WLxx" + }, + { + "id": "0x2abc77ec", + "short_name": "LPC55", + "description": "NXP LPC55xx" + }, + { + "id": "0x300f5633", + "short_name": "STM32G0", + "description": "ST STM32G0xx" + }, + { + "id": "0x31d228c6", + "short_name": "GD32F350", + "description": "GD32F350" + }, + { + "id": "0x04240bdf", + "short_name": "STM32L5", + "description": "ST STM32L5xx" + }, + { + "id": "0x4c71240a", + "short_name": "STM32G4", + "description": "ST STM32G4xx" + }, + { + "id": "0x4fb2d5bd", + "short_name": "MIMXRT10XX", + "description": "NXP i.MX RT10XX" + }, + { + "id": "0x53b80f00", + "short_name": "STM32F7", + "description": "ST STM32F7xx" + }, + { + "id": "0x55114460", + "short_name": "SAMD51", + "description": "Microchip (Atmel) SAMD51" + }, + { + "id": "0x57755a57", + "short_name": "STM32F4", + "description": "ST STM32F401" + }, + { + "id": "0x5a18069b", + "short_name": "FX2", + "description": "Cypress FX2" + }, + { + "id": "0x5d1a0a2e", + "short_name": "STM32F2", + "description": "ST STM32F2xx" + }, + { + "id": "0x5ee21072", + "short_name": "STM32F1", + "description": "ST STM32F103" + }, + { + "id": "0x621e937a", + "short_name": "NRF52833", + "description": "Nordic NRF52833" + }, + { + "id": "0x647824b6", + "short_name": "STM32F0", + "description": "ST STM32F0xx" + }, + { + "id": "0x68ed2b88", + "short_name": "SAMD21", + "description": "Microchip (Atmel) SAMD21" + }, + { + "id": "0x6b846188", + "short_name": "STM32F3", + "description": "ST STM32F3xx" + }, + { + "id": "0x6d0922fa", + "short_name": "STM32F407", + "description": "ST STM32F407" + }, + { + "id": "0x6db66082", + "short_name": "STM32H7", + "description": "ST STM32H7xx" + }, + { + "id": "0x70d16653", + "short_name": "STM32WB", + "description": "ST STM32WBxx" + }, + { + "id": "0x7eab61ed", + "short_name": "ESP8266", + "description": "ESP8266" + }, + { + "id": "0x7f83e793", + "short_name": "KL32L2", + "description": "NXP KL32L2x" + }, + { + "id": "0x8fb060fe", + "short_name": "STM32F407VG", + "description": "ST STM32F407VG" + }, + { + "id": "0xada52840", + "short_name": "NRF52840", + "description": "Nordic NRF52840" + }, + { + "id": "0xbfdd4eee", + "short_name": "ESP32S2", + "description": "ESP32-S2" + }, + { + "id": "0xc47e5767", + "short_name": "ESP32S3", + "description": "ESP32-S3" + }, + { + "id": "0xd42ba06c", + "short_name": "ESP32C3", + "description": "ESP32-C3" + }, + { + "id": "0x2b88d29c", + "short_name": "ESP32C2", + "description": "ESP32-C2" + }, + { + "id": "0x332726f6", + "short_name": "ESP32H2", + "description": "ESP32-H2" + }, + { + "id": "0xe48bff56", + "short_name": "RP2040", + "description": "Raspberry Pi RP2040" + }, + { + "id": "0x00ff6919", + "short_name": "STM32L4", + "description": "ST STM32L4xx" + }, + { + "id": "0x9af03e33", + "short_name": "GD32VF103", + "description": "GigaDevice GD32VF103" + } +] |