diff options
| -rw-r--r-- | keyboard/planck/Makefile | 13 | ||||
| -rw-r--r-- | keyboard/planck/config.h | 15 | ||||
| -rw-r--r-- | keyboard/planck/keymaps/yang/keymap.c | 146 | ||||
| -rwxr-xr-x | keyboard/planck/light_ws2812.c | 181 | ||||
| -rwxr-xr-x | keyboard/planck/light_ws2812.h | 73 | ||||
| -rw-r--r-- | keyboard/planck/planck.c | 7 | ||||
| -rw-r--r-- | keyboard/planck/planck.h | 9 | ||||
| -rw-r--r-- | keyboard/planck/rgblight.c | 505 | ||||
| -rw-r--r-- | keyboard/planck/rgblight.h | 87 |
9 files changed, 1029 insertions, 7 deletions
diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile index 8414b2ccc0..d37005260a 100644 --- a/keyboard/planck/Makefile +++ b/keyboard/planck/Makefile @@ -27,7 +27,7 @@ # make flip-ee = Download the eeprom file to the device, using Atmel FLIP # (must have Atmel FLIP installed). # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -137,17 +137,25 @@ CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality # MIDI_ENABLE = YES # MIDI controls # AUDIO_ENABLE = YES # Audio output on port C6 # UNICODE_ENABLE = YES # Unicode # BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 bottom RGB light ifdef BACKLIGHT_ENABLE SRC += backlight.c endif +ifdef RGBLIGHT_ENABLE + SRC += light_ws2812.c + SRC += rgblight.c + OPT_DEFS += -DRGBLIGHT_ENABLE +endif + + # Optimize size but this may cause error "relocation truncated to fit" #EXTRALDFLAGS = -Wl,--relax @@ -157,4 +165,3 @@ VPATH += $(TOP_DIR) VPATH += $(TMK_DIR) include $(TOP_DIR)/quantum/quantum.mk - diff --git a/keyboard/planck/config.h b/keyboard/planck/config.h index a4c711db82..856de73066 100644 --- a/keyboard/planck/config.h +++ b/keyboard/planck/config.h @@ -58,6 +58,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) +/* ws2812 RGB LED */ +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD +#define ws2812_pin PD1 +#define RGBLED_NUM 28 // Number of LEDs +#ifndef RGBLIGHT_HUE_STEP +#define RGBLIGHT_HUE_STEP 10 +#endif +#ifndef RGBLIGHT_SAT_STEP +#define RGBLIGHT_SAT_STEP 17 +#endif +#ifndef RGBLIGHT_VAL_STEP +#define RGBLIGHT_VAL_STEP 17 +#endif + /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboard/planck/keymaps/yang/keymap.c b/keyboard/planck/keymaps/yang/keymap.c new file mode 100644 index 0000000000..541b1a57e4 --- /dev/null +++ b/keyboard/planck/keymaps/yang/keymap.c @@ -0,0 +1,146 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _CM 1 +#define _DV 2 +#define _LW 3 +#define _RS 4 +#define _RGB 5 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QW] = { /* Qwerty */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), F(0), F(0), MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_CM] = { /* Colemak */ + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), F(0), F(0), MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_DV] = { /* Dvorak */ + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), F(0), F(0), MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_RS] = { /* RAISE */ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_LW] = { /* LOWER */ + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_RGB] = { /* RGBLIGHT */ + {KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL}, + {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, KC_TRNS}, + {KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} + +} +}; + +enum function_id { + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_RGB, KC_SPC), + [1] = ACTION_FUNCTION(RGBLED_TOGGLE), + [2] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + //led operations + if (record->event.pressed) { + rgblight_toggle(); + } + + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + } +} diff --git a/keyboard/planck/light_ws2812.c b/keyboard/planck/light_ws2812.c new file mode 100755 index 0000000000..f20043067e --- /dev/null +++ b/keyboard/planck/light_ws2812.c @@ -0,0 +1,181 @@ +/* +* light weight WS2812 lib V2.0b +* +* Controls WS2811/WS2812/WS2812B RGB-LEDs +* Author: Tim (cpldcpu@gmail.com) +* +* Jan 18th, 2014 v2.0b Initial Version +* Nov 29th, 2015 v2.3 Added SK6812RGBW support +* +* License: GNU GPL v2 (see License.txt) +*/ + +#include "light_ws2812.h" +#include <avr/interrupt.h> +#include <avr/io.h> +#include <util/delay.h> +#include "debug.h" + +// Setleds for standard RGB +void inline ws2812_setleds(struct cRGB *ledarray, uint16_t leds) +{ + ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin)); +} + +void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pinmask) +{ + ws2812_DDRREG |= pinmask; // Enable DDR + ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask); + _delay_us(50); +} + +// Setleds for SK6812RGBW +void inline ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t leds) +{ + ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR + ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(ws2812_pin)); + _delay_us(80); +} + +void ws2812_sendarray(uint8_t *data,uint16_t datlen) +{ + ws2812_sendarray_mask(data,datlen,_BV(ws2812_pin)); +} + +/* + This routine writes an array of bytes with RGB values to the Dataout pin + using the fast 800kHz clockless WS2811/2812 protocol. +*/ + +// Timing in ns +#define w_zeropulse 350 +#define w_onepulse 900 +#define w_totalperiod 1250 + +// Fixed cycles used by the inner loop +#define w_fixedlow 2 +#define w_fixedhigh 4 +#define w_fixedtotal 8 + +// Insert NOPs to match the timing, if possible +#define w_zerocycles (((F_CPU/1000)*w_zeropulse )/1000000) +#define w_onecycles (((F_CPU/1000)*w_onepulse +500000)/1000000) +#define w_totalcycles (((F_CPU/1000)*w_totalperiod +500000)/1000000) + +// w1 - nops between rising edge and falling edge - low +#define w1 (w_zerocycles-w_fixedlow) +// w2 nops between fe low and fe high +#define w2 (w_onecycles-w_fixedhigh-w1) +// w3 nops to complete loop +#define w3 (w_totalcycles-w_fixedtotal-w1-w2) + +#if w1>0 + #define w1_nops w1 +#else + #define w1_nops 0 +#endif + +// The only critical timing parameter is the minimum pulse length of the "0" +// Warn or throw error if this timing can not be met with current F_CPU settings. +#define w_lowtime ((w1_nops+w_fixedlow)*1000000)/(F_CPU/1000) +#if w_lowtime>550 + #error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?" +#elif w_lowtime>450 + #warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)." + #warning "Please consider a higher clockspeed, if possible" +#endif + +#if w2>0 +#define w2_nops w2 +#else +#define w2_nops 0 +#endif + +#if w3>0 +#define w3_nops w3 +#else +#define w3_nops 0 +#endif + +#define w_nop1 "nop \n\t" +#define w_nop2 "rjmp .+0 \n\t" +#define w_nop4 w_nop2 w_nop2 +#define w_nop8 w_nop4 w_nop4 +#define w_nop16 w_nop8 w_nop8 + +void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi) +{ + uint8_t curbyte,ctr,masklo; + uint8_t sreg_prev; + + masklo =~maskhi&ws2812_PORTREG; + maskhi |= ws2812_PORTREG; + sreg_prev=SREG; + cli(); + + while (datlen--) { + curbyte=*data++; + + asm volatile( + " ldi %0,8 \n\t" + "loop%=: \n\t" + " out %2,%3 \n\t" // '1' [01] '0' [01] - re +#if (w1_nops&1) +w_nop1 +#endif +#if (w1_nops&2) +w_nop2 +#endif +#if (w1_nops&4) +w_nop4 +#endif +#if (w1_nops&8) +w_nop8 +#endif +#if (w1_nops&16) +w_nop16 +#endif + " sbrs %1,7 \n\t" // '1' [03] '0' [02] + " out %2,%4 \n\t" // '1' [--] '0' [03] - fe-low + " lsl %1 \n\t" // '1' [04] '0' [04] +#if (w2_nops&1) + w_nop1 +#endif +#if (w2_nops&2) + w_nop2 +#endif +#if (w2_nops&4) + w_nop4 +#endif +#if (w2_nops&8) + w_nop8 +#endif +#if (w2_nops&16) + w_nop16 +#endif + " out %2,%4 \n\t" // '1' [+1] '0' [+1] - fe-high +#if (w3_nops&1) +w_nop1 +#endif +#if (w3_nops&2) +w_nop2 +#endif +#if (w3_nops&4) +w_nop4 +#endif +#if (w3_nops&8) +w_nop8 +#endif +#if (w3_nops&16) +w_nop16 +#endif + + " dec %0 \n\t" // '1' [+2] '0' [+2] + " brne loop%=\n\t" // '1' [+3] '0' [+4] + : "=&d" (ctr) + : "r" (curbyte), "I" (_SFR_IO_ADDR(ws2812_PORTREG)), "r" (maskhi), "r" (masklo) + ); + } + + SREG=sreg_prev; +} diff --git a/keyboard/planck/light_ws2812.h b/keyboard/planck/light_ws2812.h new file mode 100755 index 0000000000..54eef22d9e --- /dev/null +++ b/keyboard/planck/light_ws2812.h @@ -0,0 +1,73 @@ +/* + * light weight WS2812 lib include + * + * Version 2.3 - Nev 29th 2015 + * Author: Tim (cpldcpu@gmail.com) + * + * Please do not change this file! All configuration is handled in "ws2812_config.h" + * + * License: GNU GPL v2 (see License.txt) + + + */ + +#ifndef LIGHT_WS2812_H_ +#define LIGHT_WS2812_H_ + +#include <avr/io.h> +#include <avr/interrupt.h> +//#include "ws2812_config.h" + +/* + * Structure of the LED array + * + * cRGB: RGB for WS2812S/B/C/D, SK6812, SK6812Mini, SK6812WWA, APA104, APA106 + * cRGBW: RGBW for SK6812RGBW + */ + +struct cRGB { uint8_t g; uint8_t r; uint8_t b; }; +struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;}; + + + +/* User Interface + * + * Input: + * ledarray: An array of GRB data describing the LED colors + * number_of_leds: The number of LEDs to write + * pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0) + * + * The functions will perform the following actions: + * - Set the data-out pin as output + * - Send out the LED data + * - Wait 50�s to reset the LEDs + */ + +void ws2812_setleds (struct cRGB *ledarray, uint16_t number_of_leds); +void ws2812_setleds_pin (struct cRGB *ledarray, uint16_t number_of_leds,uint8_t pinmask); +void ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t number_of_leds); + +/* + * Old interface / Internal functions + * + * The functions take a byte-array and send to the data output as WS2812 bitstream. + * The length is the number of bytes to send - three per LED. + */ + +void ws2812_sendarray (uint8_t *array,uint16_t length); +void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask); + + +/* + * Internal defines + */ +#ifndef CONCAT +#define CONCAT(a, b) a ## b +#endif +#ifndef CONCAT_EXP +#define CONCAT_EXP(a, b) CONCAT(a, b) +#endif + +// #define ws2812_PORTREG CONCAT_EXP(PORT,ws2812_port) +// #define ws2812_DDRREG CONCAT_EXP(DDR,ws2812_port) + +#endif /* LIGHT_WS2812_H_ */ diff --git a/keyboard/planck/planck.c b/keyboard/planck/planck.c index b62862af04..63ca54761c 100644 --- a/keyboard/planck/planck.c +++ b/keyboard/planck/planck.c @@ -15,6 +15,11 @@ void * matrix_init_kb(void) { backlight_init_ports(); #endif + #ifdef RGBLIGHT_ENABLE + rgblight_init(); + #endif + + // Turn status LED on DDRE |= (1<<6); PORTE |= (1<<6); @@ -28,4 +33,4 @@ void * matrix_scan_kb(void) { if (matrix_scan_user) { (*matrix_scan_user)(); } -};
\ No newline at end of file +}; diff --git a/keyboard/planck/planck.h b/keyboard/planck/planck.h index e775ea7c62..00b01b54df 100644 --- a/keyboard/planck/planck.h +++ b/keyboard/planck/planck.h @@ -6,6 +6,9 @@ #ifdef BACKLIGHT_ENABLE #include "backlight.h" #endif +#ifdef RGBLIGHT_ENABLE + #include "rgblight.h" +#endif #include <stddef.h> #ifdef MIDI_ENABLE #include <keymap_midi.h> @@ -22,7 +25,7 @@ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ { k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \ -} +} #define PLANCK_GRID( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ @@ -35,9 +38,9 @@ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ -} +} void * matrix_init_user(void); void * matrix_scan_user(void); -#endif
\ No newline at end of file +#endif diff --git a/keyboard/planck/rgblight.c b/keyboard/planck/rgblight.c new file mode 100644 index 0000000000..552456aae3 --- /dev/null +++ b/keyboard/planck/rgblight.c @@ -0,0 +1,505 @@ +#include <avr/eeprom.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include "progmem.h" +#include "timer.h" +#include "rgblight.h" +#include "debug.h" + +const uint8_t DIM_CURVE[] PROGMEM = { + 0, 1, 1, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, + 3, 3, 3, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 6, 6, 6, + 6, 6, 6, 6, 6, 7, 7, 7, 7, 7, 7, 7, 8, 8, 8, 8, + 8, 8, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 11, 11, 11, + 11, 11, 12, 12, 12, 12, 12, 13, 13, 13, 13, 14, 14, 14, 14, 15, + 15, 15, 16, 16, 16, 16, 17, 17, 17, 18, 18, 18, 19, 19, 19, 20, + 20, 20, 21, 21, 22, 22, 22, 23, 23, 24, 24, 25, 25, 25, 26, 26, + 27, 27, 28, 28, 29, 29, 30, 30, 31, 32, 32, 33, 33, 34, 35, 35, + 36, 36, 37, 38, 38, 39, 40, 40, 41, 42, 43, 43, 44, 45, 46, 47, + 48, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, + 63, 64, 65, 66, 68, 69, 70, 71, 73, 74, 75, 76, 78, 79, 81, 82, + 83, 85, 86, 88, 90, 91, 93, 94, 96, 98, 99, 101, 103, 105, 107, 109, + 110, 112, 114, 116, 118, 121, 123, 125, 127, 129, 132, 134, 136, 139, 141, 144, + 146, 149, 151, 154, 157, 159, 162, 165, 168, 171, 174, 177, 180, 183, 186, 190, + 193, 196, 200, 203, 207, 211, 214, 218, 222, 226, 230, 234, 238, 242, 248, 255, +}; +const uint8_t RGBLED_BREATHING_TABLE[] PROGMEM = {0,0,0,0,1,1,1,2,2,3,4,5,5,6,7,9,10,11,12,14,15,17,18,20,21,23,25,27,29,31,33,35,37,40,42,44,47,49,52,54,57,59,62,65,67,70,73,76,79,82,85,88,90,93,97,100,103,106,109,112,115,118,121,124,127,131,134,137,140,143,146,149,152,155,158,162,165,167,170,173,176,179,182,185,188,190,193,196,198,201,203,206,208,211,213,215,218,220,222,224,226,228,230,232,234,235,237,238,240,241,243,244,245,246,248,249,250,250,251,252,253,253,254,254,254,255,255,255,255,255,255,255,254,254,254,253,253,252,251,250,250,249,248,246,245,244,243,241,240,238,237,235,234,232,230,228,226,224,222,220,218,215,213,211,208,206,203,201,198,196,193,190,188,185,182,179,176,173,170,167,165,162,158,155,152,149,146,143,140,137,134,131,128,124,121,118,115,112,109,106,103,100,97,93,90,88,85,82,79,76,73,70,67,65,62,59,57,54,52,49,47,44,42,40,37,35,33,31,29,27,25,23,21,20,18,17,15,14,12,11,10,9,7,6,5,5,4,3,2,2,1,1,1,0,0,0}; +const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5}; +const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30}; +const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20}; +const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20}; +const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {100, 50, 20}; + +rgblight_config_t rgblight_config; +rgblight_config_t inmem_config; +struct cRGB led[RGBLED_NUM]; +uint8_t rgblight_inited = 0; + + +void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1) { + /* convert hue, saturation and brightness ( HSB/HSV ) to RGB + The DIM_CURVE is used only on brightness/value and on saturation (inverted). + This looks the most natural. + */ + uint8_t r, g, b; + + val = pgm_read_byte(&DIM_CURVE[val]); + sat = 255 - pgm_read_byte(&DIM_CURVE[255 - sat]); + + uint8_t base; + + if (sat == 0) { // Acromatic color (gray). Hue doesn't mind. + r = val; + g = val; + b = val; + } else { + base = ((255 - sat) * val) >> 8; + + switch (hue / 60) { + case 0: + r = val; + g = (((val - base)*hue) / 60) + base; + b = base; + break; + + case 1: + r = (((val - base)*(60 - (hue % 60))) / 60) + base; + g = val; + b = base; + break; + + case 2: + r = base; + g = val; + b = (((val - base)*(hue % 60)) / 60) + base; + break; + + case 3: + r = base; + g = (((val - base)*(60 - (hue % 60))) / 60) + base; + b = val; + break; + + case 4: + r = (((val - base)*(hue % 60)) / 60) + base; + g = base; + b = val; + break; + + case 5: + r = val; + g = base; + b = (((val - base)*(60 - (hue % 60))) / 60) + base; + break; + } + } + setrgb(r,g,b, led1); +} + +void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1) { + (*led1).r = r; + (*led1).g = g; + (*led1).b = b; +} + + +uint32_t eeconfig_read_rgblight(void) { + return eeprom_read_dword(EECONFIG_RGBLIGHT); +} +void eeconfig_write_rgblight(uint32_t val) { + eeprom_write_dword(EECONFIG_RGBLIGHT, val); +} +void eeconfig_write_rgblight_default(void) { + dprintf("eeconfig_write_rgblight_default\n"); + rgblight_config.enable = 1; + rgblight_config.mode = 1; + rgblight_config.hue = 200; + rgblight_config.sat = 204; + rgblight_config.val = 204; + eeconfig_write_rgblight(rgblight_config.raw); +} +void eeconfig_debug_rgblight(void) { + dprintf("rgblight_config eprom\n"); + dprintf("rgblight_config.enable = %d\n", rgblight_config.enable); + dprintf("rghlight_config.mode = %d\n", rgblight_config.mode); + dprintf("rgblight_config.hue = %d\n", rgblight_config.hue); + dprintf("rgblight_config.sat = %d\n", rgblight_config.sat); + dprintf("rgblight_config.val = %d\n", rgblight_config.val); +} + +void rgblight_init(void) { + debug_enable = 1; // Debug ON! + dprintf("rgblight_init called.\n"); + rgblight_inited = 1; + dprintf("rgblight_init start!\n"); + if (!eeconfig_is_enabled()) { + dprintf("rgblight_init eeconfig is not enabled.\n"); + eeconfig_init(); + eeconfig_write_rgblight_default(); + } + rgblight_config.raw = eeconfig_read_rgblight(); + if (!rgblight_config.mode) { + dprintf("rgblight_init rgblight_config.mode = 0. Write default values to EEPROM.\n"); + eeconfig_write_rgblight_default(); + rgblight_config.raw = eeconfig_read_rgblight(); + } + eeconfig_debug_rgblight(); // display current eeprom values + + rgblight_timer_init(); // setup the timer + + if (rgblight_config.enable) { + rgblight_mode(rgblight_config.mode); + } +} + +void rgblight_increase(void) { + uint8_t mode; + if (rgblight_config.mode < RGBLIGHT_MODES) { + mode = rgblight_config.mode + 1; + } + rgblight_mode(mode); +} + +void rgblight_decrease(void) { + uint8_t mode; + if (rgblight_config.mode > 1) { //mode will never < 1, if mode is less than 1, eeprom need to be initialized. + mode = rgblight_config.mode-1; + } + rgblight_mode(mode); +} + +void rgblight_step(void) { + uint8_t mode; + mode = rgblight_config.mode + 1; + if (mode > RGBLIGHT_MODES) { + mode = 1; + } + rgblight_mode(mode); +} + +void rgblight_mode(uint8_t mode) { + if (!rgblight_config.enable) { + return; + } + if (mode<1) { + rgblight_config.mode = 1; + } else if (mode > RGBLIGHT_MODES) { + rgblight_config.mode = RGBLIGHT_MODES; + } else { + rgblight_config.mode = mode; + } + eeconfig_write_rgblight(rgblight_config.raw); + dprintf("rgblight mode: %u\n", rgblight_config.mode); + if (rgblight_config.mode == 1) { + rgblight_timer_disable(); + } else if (rgblight_config.mode >=2 && rgblight_config.mode <=23) { + // MODE 2-5, breathing + // MODE 6-8, rainbow mood + // MODE 9-14, rainbow swirl + // MODE 15-20, snake + // MODE 21-23, knight + rgblight_timer_enable(); + } + rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val); +} + +void rgblight_toggle(void) { + rgblight_config.enable ^= 1; + eeconfig_write_rgblight(rgblight_config.raw); + dprintf("rgblight toggle: rgblight_config.enable = %u\n", rgblight_config.enable); + if (rgblight_config.enable) { + rgblight_mode(rgblight_config.mode); + } else { + rgblight_timer_disable(); + _delay_ms(50); + rgblight_set(); + } +} + + +void rgblight_increase_hue(void){ + uint16_t hue; + hue = (rgblight_config.hue+RGBLIGHT_HUE_STEP) % 360; + rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val); +} +void rgblight_decrease_hue(void){ + uint16_t hue; + if (rgblight_config.hue-RGBLIGHT_HUE_STEP <0 ) { + hue = (rgblight_config.hue+360-RGBLIGHT_HUE_STEP) % 360; + } else { + hue = (rgblight_config.hue-RGBLIGHT_HUE_STEP) % 360; + } + rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val); +} +void rgblight_increase_sat(void) { + uint8_t sat; + if (rgblight_config.sat + RGBLIGHT_SAT_STEP > 255) { + sat = 255; + } else { + sat = rgblight_config.sat+RGBLIGHT_SAT_STEP; + } + rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val); +} +void rgblight_decrease_sat(void){ + uint8_t sat; + if (rgblight_config.sat - RGBLIGHT_SAT_STEP < 0) { + sat = 0; + } else { + sat = rgblight_config.sat-RGBLIGHT_SAT_STEP; + } + rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val); +} +void rgblight_increase_val(void){ + uint8_t val; + if (rgblight_config.val + RGBLIGHT_VAL_STEP > 255) { + val = 255; + } else { + val = rgblight_config.val+RGBLIGHT_VAL_STEP; + } + rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val); +} +void rgblight_decrease_val(void) { + uint8_t val; + if (rgblight_config.val - RGBLIGHT_VAL_STEP < 0) { + val = 0; + } else { + val = rgblight_config.val-RGBLIGHT_VAL_STEP; + } + rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val); +} + +void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val){ + inmem_config.raw = rgblight_config.raw; + if (rgblight_config.enable) { + struct cRGB tmp_led; + sethsv(hue, sat, val, &tmp_led); + inmem_config.hue = hue; + inmem_config.sat = sat; + inmem_config.val = val; + // dprintf("rgblight set hue [MEMORY]: %u,%u,%u\n", inmem_config.hue, inmem_config.sat, inmem_config.val); + rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b); + } +} +void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val){ + if (rgblight_config.enable) { + if (rgblight_config.mode == 1) { + // same static color + rgblight_sethsv_noeeprom(hue, sat, val); + } else { + // all LEDs in same color + if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { + // breathing mode, ignore the change of val, use in memory value instead + val = rgblight_config.val; + } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 14) { + // rainbow mood and rainbow swirl, ignore the change of hue + hue = rgblight_config.hue; + } + } + rgblight_config.hue = hue; + rgblight_config.sat = sat; + rgblight_config.val = val; + eeconfig_write_rgblight(rgblight_config.raw); + dprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val); + } +} + +void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b){ + // dprintf("rgblight set rgb: %u,%u,%u\n", r,g,b); + for (uint8_t i=0;i<RGBLED_NUM;i++) { + led[i].r = r; + led[i].g = g; + led[i].b = b; + } + rgblight_set(); + +} + +void rgblight_set(void) { + if (rgblight_config.enable) { + ws2812_setleds(led, RGBLED_NUM); + } else { + for (uint8_t i=0;i<RGBLED_NUM;i++) { + led[i].r = 0; + led[i].g = 0; + led[i].b = 0; + } + ws2812_setleds(led, RGBLED_NUM); + } +} + +// Animation timer -- AVR Timer3 +void rgblight_timer_init(void) { + static uint8_t rgblight_timer_is_init = 0; + if (rgblight_timer_is_init) { + return; + } + rgblight_timer_is_init = 1; + /* Timer 3 setup */ + TCCR3B = _BV(WGM32) //CTC mode OCR3A as TOP + | _BV(CS30); //Clock selelct: clk/1 + /* Set TOP value */ + uint8_t sreg = SREG; + cli(); + OCR3AH = (RGBLED_TIMER_TOP>>8)&0xff; + OCR3AL = RGBLED_TIMER_TOP&0xff; + SREG = sreg; +} +void rgblight_timer_enable(void) { + TIMSK3 |= _BV(OCIE3A); + dprintf("TIMER3 enabled.\n"); +} +void rgblight_timer_disable(void) { + TIMSK3 &= ~_BV(OCIE3A); + dprintf("TIMER3 disabled.\n"); +} +void rgblight_timer_toggle(void) { + TIMSK3 ^= _BV(OCIE3A); + dprintf("TIMER3 toggled.\n"); +} + +ISR(TIMER3_COMPA_vect) { + // Mode = 1, static light, do nothing here + if (rgblight_config.mode>=2 && rgblight_config.mode<=5) { + // mode = 2 to 5, breathing mode + rgblight_effect_breathing(rgblight_config.mode-2); + + } else if (rgblight_config.mode>=6 && rgblight_config.mode<=8) { + rgblight_effect_rainbow_mood(rgblight_config.mode-6); + } else if (rgblight_config.mode>=9 && rgblight_config.mode<=14) { + rgblight_effect_rainbow_swirl(rgblight_config.mode-9); + } else if (rgblight_config.mode>=15 && rgblight_config.mode<=20) { + rgblight_effect_snake(rgblight_config.mode-15); + } else if (rgblight_config.mode>=21 && rgblight_config.mode<=23) { + rgblight_effect_knight(rgblight_config.mode-21); + } +} + +// effects +void rgblight_effect_breathing(uint8_t interval) { + static uint8_t pos = 0; + static uint16_t last_timer = 0; + + if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_BREATHING_INTERVALS[interval])) return; + last_timer = timer_read(); + + rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, pgm_read_byte(&RGBLED_BREATHING_TABLE[pos])); + pos = (pos+1) % 256; +} + +void rgblight_effect_rainbow_mood(uint8_t interval) { + static uint16_t current_hue=0; + static uint16_t last_timer = 0; + + if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_RAINBOW_MOOD_INTERVALS[interval])) return; + last_timer = timer_read(); + rgblight_sethsv_noeeprom(current_hue, rgblight_config.sat, rgblight_config.val); + current_hue = (current_hue+1) % 360; +} + +void rgblight_effect_rainbow_swirl(uint8_t interval) { + static uint16_t current_hue=0; + static uint16_t last_timer = 0; + uint16_t hue; + uint8_t i; + if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_RAINBOW_MOOD_INTERVALS[interval/2])) return; + last_timer = timer_read(); + for (i=0; i<RGBLED_NUM; i++) { + hue = (360/RGBLED_NUM*i+current_hue)%360; + sethsv(hue, rgblight_config.sat, rgblight_config.val, &led[i]); + } + rgblight_set(); + + if (interval % 2) { + current_hue = (current_hue+1) % 360; + } else { + if (current_hue -1 < 0) { + current_hue = 359; + } else { + current_hue = current_hue - 1; + } + + } +} +void rgblight_effect_snake(uint8_t interval) { + static uint8_t pos=0; + static uint16_t last_timer = 0; + uint8_t i,j; + int8_t k; + int8_t increament = 1; + if (interval%2) increament = -1; + if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_SNAKE_INTERVALS[interval/2])) return; + last_timer = timer_read(); + for (i=0;i<RGBLED_NUM;i++) { + led[i].r=0; + led[i].g=0; + led[i].b=0; + for (j=0;j<RGBLIGHT_EFFECT_SNAKE_LENGTH;j++) { + k = pos+j*increament; + if (k<0) k = k+RGBLED_NUM; + if (i==k) { + sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), &led[i]); + } + } + } + rgblight_set(); + if (increament == 1) { + if (pos - 1 < 0) { + pos = 13; + } else { + pos -= 1; + } + } else { + pos = (pos+1)%RGBLED_NUM; + } + +} + +void rgblight_effect_knight(uint8_t interval) { + static int8_t pos=0; + static uint16_t last_timer = 0; + uint8_t i,j,cur; + int8_t k; + struct cRGB preled[RGBLED_NUM]; + static int8_t increament = -1; + if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_KNIGHT_INTERVALS[interval])) return; + last_timer = timer_read(); + for (i=0;i<RGBLED_NUM;i++) { + preled[i].r=0; + preled[i].g=0; + preled[i].b=0; + for (j=0;j<RGBLIGHT_EFFECT_KNIGHT_LENGTH;j++) { + k = pos+j*increament; + if (k<0) k = 0; + if (k>=RGBLED_NUM) k=RGBLED_NUM-1; + if (i==k) { + sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, &preled[i]); + } + } + } + if (RGBLIGHT_EFFECT_KNIGHT_OFFSET) { + for (i=0;i<RGBLED_NUM;i++) { + cur = (i+RGBLIGHT_EFFECT_KNIGHT_OFFSET) % RGBLED_NUM; + led[i].r = preled[cur].r; + led[i].g = preled[cur].g; + led[i].b = preled[cur].b; + } + } + rgblight_set(); + if (increament == 1) { + if (pos - 1 < 0 - RGBLIGHT_EFFECT_KNIGHT_LENGTH) { + pos = 0- RGBLIGHT_EFFECT_KNIGHT_LENGTH; + increament = -1; + } else { + pos -= 1; + } + } else { + if (pos+1>RGBLED_NUM+RGBLIGHT_EFFECT_KNIGHT_LENGTH) { + pos = RGBLED_NUM+RGBLIGHT_EFFECT_KNIGHT_LENGTH-1; + increament = 1; + } else { + pos += 1; + } + } + +} diff --git a/keyboard/planck/rgblight.h b/keyboard/planck/rgblight.h new file mode 100644 index 0000000000..fd39ead09f --- /dev/null +++ b/keyboard/planck/rgblight.h @@ -0,0 +1,87 @@ +#ifndef RGBLIGHT_H +#define RGBLIGHT_H + +#ifndef RGBLIGHT_MODES +#define RGBLIGHT_MODES 23 +#endif + +#ifndef RGBLIGHT_EFFECT_SNAKE_LENGTH +#define RGBLIGHT_EFFECT_SNAKE_LENGTH 7 +#endif + +#ifndef RGBLIGHT_EFFECT_KNIGHT_LENGTH +#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 7 +#endif +#ifndef RGBLIGHT_EFFECT_KNIGHT_OFFSET +#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 11 +#endif + +#ifndef RGBLIGHT_EFFECT_DUALKNIGHT_LENGTH +#define RGBLIGHT_EFFECT_DUALKNIGHT_LENGTH 4 +#endif + +#ifndef RGBLIGHT_HUE_STEP +#define RGBLIGHT_HUE_STEP 10 +#endif +#ifndef RGBLIGHT_SAT_STEP +#define RGBLIGHT_SAT_STEP 17 +#endif +#ifndef RGBLIGHT_VAL_STEP +#define RGBLIGHT_VAL_STEP 17 +#endif + +#define RGBLED_TIMER_TOP F_CPU/(256*64) + +#include <stdint.h> +#include <stdbool.h> +#include "eeconfig.h" +#include "light_ws2812.h" + +typedef union { + uint32_t raw; + struct { + bool enable :1; + uint8_t mode :6; + uint16_t hue :9; + uint8_t sat :8; + uint8_t val :8; + }; +} rgblight_config_t; + +void rgblight_init(void); +void rgblight_increase(void); +void rgblight_decrease(void); +void rgblight_toggle(void); +void rgblight_step(void); +void rgblight_mode(uint8_t mode); +void rgblight_set(void); +void rgblight_increase_hue(void); +void rgblight_decrease_hue(void); +void rgblight_increase_sat(void); +void rgblight_decrease_sat(void); +void rgblight_increase_val(void); +void rgblight_decrease_val(void); +void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val); +void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b); + +#define EECONFIG_RGBLIGHT (uint8_t *)7 +uint32_t eeconfig_read_rgblight(void); +void eeconfig_write_rgblight(uint32_t val); +void eeconfig_write_rgblight_default(void); +void eeconfig_debug_rgblight(void); + +void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1); +void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1); +void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val); + +void rgblight_timer_init(void); +void rgblight_timer_enable(void); +void rgblight_timer_disable(void); +void rgblight_timer_toggle(void); +void rgblight_effect_breathing(uint8_t interval); +void rgblight_effect_rainbow_mood(uint8_t interval); +void rgblight_effect_rainbow_swirl(uint8_t interval); +void rgblight_effect_snake(uint8_t interval); +void rgblight_effect_knight(uint8_t interval); + +#endif |