import json pi = 3.14159 d2r = pi / 180 r2d = 180 / pi shape_config = { # 'ENGINE': 'solid', # 'solid' = solid python / OpenSCAD, 'cadquery' = cadquery / OpenCascade # 'ENGINE': 'cadquery', # 'solid' = solid python / OpenSCAD, 'cadquery' = cadquery / OpenCascade ###################### ## Shape parameters ## ###################### 'save_dir': '.', 'config_name': "DM", 'show_caps': False, 'nrows': 5, # key rows 'ncols': 6, # key columns 'alpha': pi / 12.0, # curvature of the columns 'beta': pi / 36.0, # curvature of the rows 'centerrow_offset': 3, # rows from max, controls front_back tilt 'centercol': 3, # controls left_right tilt / tenting (higher number is more tenting) 'tenting_angle': pi / 12.0, # or, change this for more precise tenting control # symmetry states if it is a symmetric or asymmetric build. If asymmetric it doubles the generation time. 'symmetry': "symmetric", # "asymmetric" or "symmetric" 'column_style_gt5': "orthographic", 'column_style': "standard", # options include :standard, :orthographic, and :fixed 'thumb_offsets': [6, -3, 7], 'keyboard_z_offset': ( 9 # controls overall height# original=9 with centercol=3# use 16 for centercol=2 ), ############################## # NEW TEST PARAMETERS ############################## 'pinky_1_5U': False, # LEAVE AS FALSE, CURRENTLY BROKEN 'first_1_5U_row': 0, 'last_1_5U_row': 5, 'thumb_style': 'CARBONFET', #'DEFAULT', 'MINI', 'CARBONFET' ############################## 'extra_width': 2.5, # extra space between the base of keys# original= 2 'extra_height': 1.0, # original= 0.5 'wall_z_offset': 15, # length of the first downward_sloping part of the wall 'wall_x_offset': 5, # offset in the x and/or y direction for the first downward_sloping part of the wall (negative) 'wall_y_offset': 6, # offset in the x and/or y direction for the first downward_sloping part of the wall (negative) 'left_wall_x_offset': 12, # specific values for the left side due to the minimal wall. 'left_wall_z_offset': 3, # specific values for the left side due to the minimal wall. 'wall_thickness': 4.5, # wall thickness parameter used on upper/mid stage of the wall 'wall_base_y_thickness': 4.5, # wall thickness at the lower stage 'wall_base_x_thickness': 4.5, # wall thickness at the lower stage 'wall_base_back_thickness': 4.5, # wall thickness at the lower stage in the specifically in back for interface. ## Settings for column_style == :fixed ## The defaults roughly match Maltron settings ## http://patentimages.storage.googleapis.com/EP0219944A2/imgf0002.png ## fixed_z overrides the z portion of the column ofsets above. ## NOTE: THIS DOESN'T WORK QUITE LIKE I'D HOPED. 'fixed_angles': [d2r * 10, d2r * 10, 0, 0, 0, d2r * -15, d2r * -15], 'fixed_x': [-41.5, -22.5, 0, 20.3, 41.4, 65.5, 89.6], # relative to the middle finger 'fixed_z': [12.1, 8.3, 0, 5, 10.7, 14.5, 17.5], 'fixed_tenting': d2r * 0, ################# ## Switch Hole ## ################# # plate options are # 'HOLE' = a square hole. Also useful for applying custom plate files. # 'NUB' = original side nubs. # 'UNDERCUT' = snap fit undercut. May require CLIP_THICKNESS and possibly CLIP_UNDERCUT tweaking # and/or filing to get proper snap. # 'HS_NUB' = hot swap underside with nubs. # 'HS_UNDERCUT' = hot swap underside with undercut. Does not generate properly. Hot swap step needs to be modified. 'plate_style': 'UNDERCUT', 'hole_keyswitch_height': 14.0, 'hole_keyswitch_width': 14.0, 'nub_keyswitch_height': 14.4, 'nub_keyswitch_width': 14.4, 'undercut_keyswitch_height': 14.4, 'undercut_keyswitch_width': 14.4, 'sa_profile_key_height': 12.7, 'plate_thickness': 4, # Undercut style dimensions 'clip_thickness': 1.4, 'clip_undercut': 1.0, 'undercut_transition': .2, # NOT FUNCTIONAL WITH OPENSCAD, ONLY WORKS WITH CADQUERY # Custom plate step file 'plate_file': None, 'plate_offset': 0.0, ########################## ## OLED Mount Location ########################## # Initial pass will be manual placement. Can be used to create other mounts as well. # Mount type options: # None or 'NONE' = No OLED mount # 'UNDERCUT' = Simple rectangle with undercut for clip in item # 'SLIDING' = Features to slide the OLED in place and use a pin or block to secure from underneath. # 'CLIP' = Features to set the OLED in a frame a snap a bezel down to hold it in place. 'oled_mount_type': 'CLIP', 'oled_configurations': { 'UNDERCUT':{ # Common parameters 'oled_mount_width': 15.0, 'oled_mount_height': 35.0, 'oled_mount_rim': 3.0, 'oled_mount_depth': 6.0, 'oled_mount_cut_depth': 20.0, 'oled_mount_location_xyz': (-80.0, 20.0, 45.0), 'oled_mount_rotation_xyz': (13.0, 0.0, -6.0), 'oled_left_wall_x_offset_override': 28.0, 'oled_left_wall_z_offset_override': 0.0, # 'UNDERCUT' Parameters 'oled_mount_undercut': 1.0, 'oled_mount_undercut_thickness': 2.0, }, 'SLIDING': { # Common parameters 'oled_mount_width': 12.5, # width of OLED, plus clearance 'oled_mount_height': 25.0, # length of screen 'oled_mount_rim': 2.5, 'oled_mount_depth': 8.0, 'oled_mount_cut_depth': 20.0, 'oled_mount_location_xyz': (-78.0, 10.0, 41.0), 'oled_mount_rotation_xyz': (6.0, 0.0, -3.0), 'oled_left_wall_x_offset_override': 24.0, 'oled_left_wall_z_offset_override': 0.0, # 'SLIDING' Parameters 'oled_thickness': 4.2, # thickness of OLED, plus clearance. Must include components 'oled_edge_overlap_end': 6.5, # length from end of viewable screen to end of PCB 'oled_edge_overlap_connector': 5.5, # length from end of viewable screen to end of PCB on connection side. 'oled_edge_overlap_thickness': 2.5, # thickness of material over edge of PCB 'oled_edge_overlap_clearance': 2.5, # Clearance to insert PCB before laying down and sliding. 'oled_edge_chamfer': 2.0, }, 'CLIP': { # Common parameters 'oled_mount_width': 12.5, # whole OLED width 'oled_mount_height': 39.0, # whole OLED length 'oled_mount_rim': 2.0, 'oled_mount_depth': 7.0, 'oled_mount_cut_depth': 20.0, 'oled_mount_location_xyz': (-78.0, 20.0, 42.0), 'oled_mount_rotation_xyz': (12.0, 0.0, -6.0), 'oled_left_wall_x_offset_override': 24.0, 'oled_left_wall_z_offset_override': 0.0, # 'CLIP' Parameters 'oled_thickness': 4.2, # thickness of OLED, plus clearance. Must include components 'oled_mount_bezel_thickness': 3.5, # z thickness of clip bezel 'oled_mount_bezel_chamfer': 2.0, # depth of the 45 degree chamfer 'oled_mount_connector_hole': 6.0, 'oled_screen_start_from_conn_end': 6.5, 'oled_screen_length': 24.5, 'oled_screen_width': 10.5, 'oled_clip_thickness': 1.5, 'oled_clip_width': 6.0, 'oled_clip_overhang': 1.0, 'oled_clip_extension': 5.0, 'oled_clip_width_clearance': 0.5, 'oled_clip_undercut': 0.5, 'oled_clip_undercut_thickness': 2.5, 'oled_clip_y_gap': .2, 'oled_clip_z_gap': .2, } }, 'web_thickness': 4.0, 'post_size': 0.1, # post_adj': post_size / 2 'post_adj': 0, 'screws_offset': 'INSIDE', #'OUTSIDE', 'INSIDE', 'ORIGINAL' ################################### ## Controller Mount / Connectors ## ################################### # connector options are # 'RJ9_USB_WALL' = Standard internal plate with RJ9 opening and square cutout for connection. # 'RJ9_USB_TEENSY' = Teensy holder # 'EXTERNAL' = square cutout for a holder such as the on from lolligagger. # controller_mount_type = 'RJ9_USB_WALL' # controller_mount_type = 'RJ9_USB_TEENSY' 'controller_mount_type': 'EXTERNAL', 'external_holder_height': 12.5, 'external_holder_width': 28.75, 'external_holder_xoffset': -5.0, # Offset is from the top inner corner of the top inner key. ################################### ## COLUMN OFFSETS #################################### 'column_offsets': [ [0, 0, 0], [0, 0, 0], [0, 2.82, -4.5], [0, 0, 0], [0, -12, 5.64], [0, -12, 5.64], [0, -12, 5.64], ], } #################################### ## END CONFIGURATION SECTION #################################### def save_config(): with open('run_config.json', mode='w') as fid: json.dump(shape_config, fid, indent=4) if __name__ == '__main__': save_config()