import sys import getopt import os import json pi = 3.14159 d2r = pi / 180 r2d = 180 / pi shape_config = { 'ENGINE': 'solid', # 'solid' = solid python / OpenSCAD, 'cadquery' = cadquery / OpenCascade # 'ENGINE': 'cadquery', # 'solid' = solid python / OpenSCAD, 'cadquery' = cadquery / OpenCascade ###################### ## Shape parameters ## ###################### 'save_dir': '.', 'config_name': "DM", 'show_caps': False, 'show_pcbs': False, #only runs if caps are shown, easist place to initially inject geometry 'nrows': 5, #5, # key rows 'ncols': 6, #6, # key columns 'alpha': pi / 12.0, # curvature of the columns 'beta': pi / 36.0, # curvature of the rows 'centercol': 3, # controls left_right tilt / tenting (higher number is more tenting) 'centerrow_offset': 3, # rows from max, controls front_back tilt 'tenting_angle': pi / 12.0, # or, change this for more precise tenting control # symmetry states if it is a symmetric or asymmetric bui. If asymmetric it doubles the generation time. 'symmetry': "symmetric", # "asymmetric" or "symmetric" 'column_style_gt5': "orthographic", 'column_style': "standard", # options include :standard, :orthographic, and :fixed 'reduced_outer_keys': True, 'thumb_offsets': [6, -3, 7], 'keyboard_z_offset': ( 11 # controls overall height# original=9 with centercol=3# use 16 for centercol=2 ), 'extra_width': 2.5, # extra space between the base of keys# original= 2 'extra_height': 1.0, # original= 0.5 'web_thickness': 4.0 + 1.1, 'post_size': 0.1, # post_adj': post_size / 2 'post_adj': 0, ############################## # THUMB PARAMETERS ############################## # 'DEFAULT' 6-key, 'MINI' 5-key, 'CARBONFET' 6-key, 'MINIDOX' 3-key, 'TRACKBALL_ORBYL', 'TRACKBALL_CJ' 'thumb_style': 'DEFAULT', 'default_1U_cluster': True, # only used with default, makes top right thumb cluster key 1U # Thumb key size. May need slight oversizing, check w/ caps. Additional spacing will be automatically added for larger keys. 'minidox_Usize': 1.6, # Thumb plate rotations, anything other than 90 degree increments WILL NOT WORK. # Screw locations and extra screw locations for separable thumb, all from thumb origin # Pulled out of hardcoding as drastic changes to the geometry may require fixes to the screw mounts. # First screw in separable should be similar to the standard location as it will receive the same modifiers. 'default_thumb_screw_xy_locations': [[-21, -58]], 'default_separable_thumb_screw_xy_locations': [[-21, -58]], 'mini_thumb_screw_xy_locations': [[-29, -52]], 'mini_separable_thumb_screw_xy_locations': [[-29, -52], [-62, 10], [12, -25]], 'minidox_thumb_screw_xy_locations': [[-37, -34]], 'minidox_separable_thumb_screw_xy_locations': [[-37, -34], [-62, 12], [10, -25]], 'carbonfet_thumb_screw_xy_locations': [[-48, -37]], 'carbonfet_separable_thumb_screw_xy_locations': [[-48, -37], [-52, 10], [12, -35]], 'orbyl_thumb_screw_xy_locations': [[-53, -68]], 'orbyl_separable_thumb_screw_xy_locations': [[-53, -68], [-66, 8], [10, -40]], 'tbcj_thumb_screw_xy_locations': [[-40, -75]], 'tbcj_separable_thumb_screw_xy_locations': [[-40, -75], [-63, 10], [15, -40]], 'thumb_plate_tr_rotation': 0.0, # Top right plate rotation tweaks as thumb cluster is crowded for hot swap, etc. 'thumb_plate_tl_rotation': 0.0, # Top left plate rotation tweaks as thumb cluster is crowded for hot swap, etc. 'thumb_plate_mr_rotation': 0.0, # Mid right plate rotation tweaks as thumb cluster is crowded for hot swap, etc. 'thumb_plate_ml_rotation': 0.0, # Mid left plate rotation tweaks as thumb cluster is crowded for hot swap, etc. 'thumb_plate_br_rotation': 0.0, # Bottom right plate rotation tweaks as thumb cluster is crowded for hot swap, etc. 'thumb_plate_bl_rotation': 0.0, # Bottom right plate rotation tweaks as thumb cluster is crowded for hot swap, etc. ############################## # EXPERIMENTAL 'separable_thumb': False, #creates a separable thumb section with additional screws to hold it down. Only attached at base. ############################## ################################### ## Trackball in Wall ## ################################### 'trackball_in_wall': False, # Separate trackball option, placing it in the OLED area 'tbiw_ball_center_row': 0.2, # up from cornerrow instead of down from top 'tbiw_translational_offset': (0.0, 0.0, 0.0), 'tbiw_rotation_offset': (0.0, 0.0, 0.0), 'tbiw_left_wall_x_offset_override': 50.0, 'tbiw_left_wall_z_offset_override': 0.0, 'tbiw_left_wall_lower_x_offset': 0.0, 'tbiw_left_wall_lower_y_offset': 0.0, 'tbiw_left_wall_lower_z_offset': 0.0, 'tbiw_oled_center_row': .75, # not none, offsets are from this position 'tbiw_oled_translation_offset': (-3.5, 0, 1.5), # Z offset tweaks are expected depending on curvature and OLED mount choice. 'tbiw_oled_rotation_offset': (0, 0, 0), ########################################################################## ## Finger Trackball in Wall EXPERIMENTAL WIP!!!! ## ########################################################################## 'finger_trackball_in_wall': False, # Separate trackball option, placing it in the OLED area 'tbiw_ball_center_column': 0.2, # up from cornerrow instead of down from top 'tbiw_translational_offset': (0.0, 0.0, 0.0), 'tbiw_rotation_offset': (0.0, 0.0, 0.0), 'tbiw_top_wall_y_offset_override': 50.0, 'tbiw_top_wall_z_offset_override': 0.0, 'tbiw_top_wall_extension_cols': 4, ########################################### ## Trackball JS / ORBYL Thumb Cluster ## ########################################## 'other_thumb': 'DEFAULT', # cluster used for second thumb except if ball_side == 'both' 'tbjs_key_diameter': 70, 'tbjs_Uwidth': 1.2, # size for inner key near trackball 'tbjs_Uheight': 1.2, # size for inner key near trackball # Offsets are per key and are applied before rotating into place around the ball # X and Y act like Tangential and Radial around the ball # 'tbjs_translation_offset': (0, 0, 10), # applied to the whole assy # 'tbjs_rotation_offset': (0, 10, 0), # applied to the whole assy 'tbjs_translation_offset': (0, 0, 2), # applied to the whole assy 'tbjs_rotation_offset': (0, -8, 0), # applied to the whole assy 'tbjs_key_translation_offsets': [ (0.0, 0.0, -3.0-5), (0.0, 0.0, -3.0-5), (0.0, 0.0, -3.0-5), (0.0, 0.0, -3.0-5), ], 'tbjs_key_rotation_offsets': [ (0.0, 0.0, 0.0), (0.0, 0.0, 0.0), (0.0, 0.0, 0.0), (0.0, 0.0, 0.0), ], ################################### ## Trackball CJ Thumb Cluster ## ################################### 'tbcj_inner_diameter': 42, 'tbcj_thickness': 2, 'tbcj_outer_diameter': 53, ################################### ## Trackball General ## ################################### 'trackball_modular': False, # Added, creates a hole with space for the lip size listed below. 'trackball_modular_lip_width': 3.0, # width of lip cleared out in ring location 'trackball_modular_ball_height': 3.0, # height of ball from ring , used to create identical position to fixed. 'trackball_modular_ring_height': 10.0, # height mount ring down from ball height. Covers gaps on elevated ball. 'trackball_modular_clearance': 0.5, # height of ball from ring, used to create identical position to fixed. 'ball_side': 'both', #'left', 'right', or 'both' 'ball_diameter': 34.0, 'ball_wall_thickness': 3, # should not be changed unless the import models are changed. 'ball_gap': 1.0, 'trackball_hole_diameter': 36.5, 'trackball_hole_height': 40, 'trackball_plate_thickness': 2, 'trackball_plate_width': 2, # Removed trackball_rotation, ball_z_offset. and trackball_sensor_rotation and added more flexibility. 'tb_socket_translation_offset': (0, 0, 2.0), # applied to the socket and sensor, large values will cause web/wall issues. 'tb_socket_rotation_offset': (0, 0, 0), # applied to the socket and sensor, large values will cause web/wall issues. 'tb_sensor_translation_offset': (0, 0, 0), #deviation from socket offsets, for fixing generated geometry issues 'tb_sensor_rotation_offset': (0, 0, 0), #deviation from socket offsets, for changing the sensor roll orientation ############################## # EXPERIMENTAL PARAMETERS ############################## 'pinky_1_5U': False, # LEAVE AS FALSE, CURRENTLY BROKEN 'first_1_5U_row': 0, 'last_1_5U_row': 5, 'skeletal': False, ############################## 'wall_z_offset': 15, # length of the first downward_sloping part of the wall 'wall_x_offset': 5, # offset in the x and/or y direction for the first downward_sloping part of the wall (negative) 'wall_y_offset': 6, # offset in the x and/or y direction for the first downward_sloping part of the wall (negative) 'left_wall_x_offset': 12, # specific values for the left side due to the minimal wall. 'left_wall_z_offset': 3, # specific values for the left side due to the minimal wall. 'left_wall_lower_x_offset': 0, # specific values for the lower left corner. 'left_wall_lower_y_offset': 0, # specific values for the lower left corner. 'left_wall_lower_z_offset': 0, 'wall_thickness': 4.5, # wall thickness parameter used on upper/mid stage of the wall 'wall_base_y_thickness': 4.5, # wall thickness at the lower stage 'wall_base_x_thickness': 4.5, # wall thickness at the lower stage 'wall_base_back_thickness': 4.5, # wall thickness at the lower stage in the specifically in back for interface. ## Settings for column_style == :fixed ## The defaults roughly match Maltron settings ## http://patentimages.storage.googleapis.com/EP0219944A2/imgf0002.png ## fixed_z overrides the z portion of the column ofsets above. ## NOTE: THIS DOESN'T WORK QUITE LIKE I'D HOPED. 'fixed_angles': [d2r * 10, d2r * 10, 0, 0, 0, d2r * -15, d2r * -15], 'fixed_x': [-41.5, -22.5, 0, 20.3, 41.4, 65.5, 89.6], # relative to the middle finger 'fixed_z': [12.1, 8.3, 0, 5, 10.7, 14.5, 17.5], 'fixed_tenting': d2r * 0, ################# ## Switch Hole ## ################# # plate options are # 'HOLE' = a square hole. Also useful for applying custom plate files. # 'NUB' = original side nubs. # 'UNDERCUT' = snap fit undercut. May require CLIP_THICKNESS and possibly CLIP_UNDERCUT tweaking # and/or filing to get proper snap. # 'NOTCH' = snap fit undercut only near switch clip. May require CLIP_THICKNESS and possibly CLIP_UNDERCUT # tweaking and/or filing to get proper snap. # 'HS_NUB' = hot swap underside with nubs. # 'HS_UNDERCUT' = hot swap underside with undercut. Does not generate properly. Hot swap step needs to be modified. # 'HS_NOTCH' = hot swap underside with notch. Does not generate properly. Hot swap step needs to be modified. # 'plate_style': 'NUB', 'plate_style': 'NOTCH', 'hole_keyswitch_height': 14.0, 'hole_keyswitch_width': 14.0, 'nub_keyswitch_height': 14.4, 'nub_keyswitch_width': 14.4, 'undercut_keyswitch_height': 14.0, 'undercut_keyswitch_width': 14.0, 'notch_width': 6.0, # If using notch, it is identical to undecut, but only locally by the switch clip 'sa_profile_key_height': 12.7, 'sa_length': 18.5, 'sa_double_length': 37.5, 'plate_thickness': 4 + 1.1, 'plate_rim': 1.5 + 0.5, # Undercut style dimensions 'clip_thickness': 1.1, 'clip_undercut': 1.0, 'undercut_transition': .2, # NOT FUNCTIONAL WITH OPENSCAD, ONLY WORKS WITH CADQUERY # Custom plate step file 'plate_file': None, 'plate_offset': 0.0, ########################## ## OLED Mount Location ########################## # Initial pass will be manual placement. Can be used to create other mounts as well. # Mount type options: # None or 'NONE' = No OLED mount # 'UNDERCUT' = Simple rectangle with undercut for clip in item # 'SLIDING' = Features to slide the OLED in place and use a pin or block to secure from underneath. # 'CLIP' = Features to set the OLED in a frame a snap a bezel down to hold it in place. 'oled_mount_type': 'CLIP', 'oled_center_row': 1.25, # if not None, this will override the oled_mount_location_xyz and oled_mount_rotation_xyz settings 'oled_translation_offset': (0, 0, 4), # Z offset tweaks are expected depending on curvature and OLED mount choice. 'oled_rotation_offset': (0, 0, 0), 'oled_configurations': { 'UNDERCUT':{ # Common parameters 'oled_mount_width': 15.0, 'oled_mount_height': 35.0, 'oled_mount_rim': 3.0, 'oled_mount_depth': 6.0, 'oled_mount_cut_depth': 20.0, 'oled_mount_location_xyz': (-80.0, 20.0, 45.0), # will be overwritten if oled_center_row is not None 'oled_mount_rotation_xyz': (13.0, 0.0, -6.0), # will be overwritten if oled_center_row is not None 'oled_left_wall_x_offset_override': 28.0, 'oled_left_wall_z_offset_override': 0.0, 'oled_left_wall_lower_y_offset': 12.0, 'oled_left_wall_lower_z_offset': 5.0, # 'UNDERCUT' Parameters 'oled_mount_undercut': 1.0, 'oled_mount_undercut_thickness': 2.0, }, 'SLIDING': { # Common parameters 'oled_mount_width': 12.5, # width of OLED, plus clearance 'oled_mount_height': 25.0, # length of screen 'oled_mount_rim': 2.5, 'oled_mount_depth': 8.0, 'oled_mount_cut_depth': 20.0, 'oled_mount_location_xyz': (-78.0, 10.0, 41.0), # will be overwritten if oled_center_row is not None 'oled_mount_rotation_xyz': (6.0, 0.0, -3.0), # will be overwritten if oled_center_row is not None 'oled_left_wall_x_offset_override': 24.0, 'oled_left_wall_z_offset_override': 0.0, 'oled_left_wall_lower_y_offset': 12.0, 'oled_left_wall_lower_z_offset': 5.0, # 'SLIDING' Parameters 'oled_thickness': 4.2, # thickness of OLED, plus clearance. Must include components 'oled_edge_overlap_end': 6.5, # length from end of viewable screen to end of PCB 'oled_edge_overlap_connector': 5.5, # length from end of viewable screen to end of PCB on connection side. 'oled_edge_overlap_thickness': 2.5, # thickness of material over edge of PCB 'oled_edge_overlap_clearance': 2.5, # Clearance to insert PCB before laying down and sliding. 'oled_edge_chamfer': 2.0, }, 'CLIP': { # Common parameters 'oled_mount_width': 12.5, # whole OLED width 'oled_mount_height': 39.0, # whole OLED length 'oled_mount_rim': 2.0, 'oled_mount_depth': 7.0, 'oled_mount_cut_depth': 20.0, 'oled_mount_location_xyz': (-78.0, 20.0, 42.0), # will be overwritten if oled_center_row is not None 'oled_mount_rotation_xyz': (12.0, 0.0, -6.0), # will be overwritten if oled_center_row is not None 'oled_left_wall_x_offset_override': 24.0, 'oled_left_wall_z_offset_override': 0.0, 'oled_left_wall_lower_y_offset': 12.0, 'oled_left_wall_lower_z_offset': 5.0, # 'CLIP' Parameters 'oled_thickness': 4.2, # thickness of OLED, plus clearance. Must include components 'oled_mount_bezel_thickness': 3.5, # z thickness of clip bezel 'oled_mount_bezel_chamfer': 2.0, # depth of the 45 degree chamfer 'oled_mount_connector_hole': 6.0, 'oled_screen_start_from_conn_end': 6.5, 'oled_screen_length': 24.5, 'oled_screen_width': 10.5, 'oled_clip_thickness': 1.5, 'oled_clip_width': 6.0, 'oled_clip_overhang': 1.0, 'oled_clip_extension': 5.0, 'oled_clip_width_clearance': 0.5, 'oled_clip_undercut': 0.5, 'oled_clip_undercut_thickness': 2.5, 'oled_clip_y_gap': .2, 'oled_clip_z_gap': .2, } }, 'screws_offset': 'INSIDE', # 'OUTSIDE', 'INSIDE', 'ORIGINAL' 'screw_insert_height': 3.8, # 'screw_insert_bottom_radius': 5.31 / 2, #Designed for inserts # 'screw_insert_top_radius': 5.1 / 2, #Designed for inserts 'screw_insert_bottom_radius': 2.5 / 2, # Designed for self tapping 'screw_insert_top_radius': 2.5 / 2, # Designed for self tapping 'screw_insert_outer_radius': 4.25, # Common to keep interface to base # Does anyone even use these? I think they just get in the way. 'wire_post_height': 7, 'wire_post_overhang': 3.5, 'wire_post_diameter': 2.6, ################################### ## Controller Mount / Connectors ## ################################### # connector options are # 'RJ9_USB_WALL' = Standard internal plate with RJ9 opening and square cutout for connection. # 'USB_WALL' = Standard internal plate with a square cutout for connection, no RJ9. # 'RJ9_USB_TEENSY' = Teensy holder # 'USB_TEENSY' = Teensy holder, no RJ9 # 'EXTERNAL' = square cutout for a holder such as the one from lolligagger. # 'NONE' = No openings in the back. 'controller_mount_type': 'EXTERNAL', 'external_holder_height': 12.5, 'external_holder_width': 28.75, 'external_holder_xoffset': -5.0, 'external_holder_yoffset': -4.5, #Tweak this value to get the right undercut for the tray engagement. # Offset is from the top inner corner of the top inner key. ################################### ## PCB Screw Mount ## ################################### "pcb_mount_ref_offset": [0, -5, 0], "pcb_holder_size": [34.6, 7, 4], "pcb_holder_offset": [8.9, 0, 0], "pcb_usb_hole_size": [7.5, 10.0, 4], "pcb_usb_hole_offset": [15, 0, 4.5], "wall_thinner_size": [34, 7, 10], "trrs_hole_size": [3, 20], "trrs_offset": [0, 0, 1.5], "pcb_screw_hole_size": [.5, 10], "pcb_screw_x_offsets": [- 5.5, 7.75, 22], # for the screw positions off of reference "pcb_screw_y_offset": -2, ################################### ## Bottom Plate Dimensions ################################### # COMMON DIMENSION 'screw_hole_diameter': 3, # USED FOR CADQUERY ONLY 'base_thickness': 3.0, # thickness in the middle of the plate 'base_offset': 3.0, # Both start flat/flush on the bottom. This offsets the base up (if positive) 'base_rim_thickness': 5.0, # thickness on the outer frame with screws 'screw_cbore_diameter': 6.0, 'screw_cbore_depth': 2.5, # Offset is from the top inner corner of the top inner key. ################################### ## HOLES ON PLATE FOR PCB MOUNT ################################### 'plate_holes': True, 'plate_holes_xy_offset': (0.0, 0.0), 'plate_holes_width': 14.3, 'plate_holes_height': 14.3, 'plate_holes_diameter': 1.6, 'plate_holes_depth': 20.0, ################################### ## EXPERIMENTAL 'plate_pcb_clear': False, 'plate_pcb_size': (18.5, 18.5, 5), 'plate_pcb_offset': (0, 0, 0),# this is off of the back of the plate size. ################################### ################################### ## SHOW PCB FOR FIT CHECK ################################### 'pcb_width': 18.0, 'pcb_height': 18.0, 'pcb_thickness': 1.5, 'pcb_hole_diameter': 2, 'pcb_hole_pattern_width': 14.3, 'pcb_hole_pattern_height': 14.3, ################################### ## COLUMN OFFSETS #################################### 'column_offsets': [ [0, 0, 0], [0, 0, 0], [0, 2.82, -4.5], [0, 0, 0], [0, -6, 5],# REDUCED STAGGER [0, -6, 5],# REDUCED STAGGER [0, -6, 5],# NOT USED IN MOST FORMATS (7th column) ], } #################################### ## END CONFIGURATION SECTION #################################### def save_config(): # Check to see if the user has specified an alternate config opts, args = getopt.getopt(sys.argv[1:], "", ["config=", "update="]) got_opts = False for opt, arg in opts: if opt in ('--update'): with open(os.path.join(r"..", "configs", arg + '.json'), mode='r') as fid: data = json.load(fid) shape_config.update(data) got_opts = True for opt, arg in opts: if opt in ('--config'): # If a config file was specified, set the config_name and save_dir shape_config['save_dir'] = arg shape_config['config_name'] = arg got_opts = True # Write the config to ./configs/.json if got_opts: with open(os.path.join(r"..", "configs", shape_config['config_name'] + '.json'), mode='w') as fid: json.dump(shape_config, fid, indent=4) else: with open(os.path.join(r".", 'run_config.json'), mode='w') as fid: json.dump(shape_config, fid, indent=4) if __name__ == '__main__': save_config() ## HERE FOR QUICK TESTING, SHOULD BE COMMENTED ON COMMIT # from dactyl_manuform import * # run()