From b81eaaf1e864e0513f595787aca802d1a4f9d421 Mon Sep 17 00:00:00 2001 From: Tom Short Date: Sat, 11 Mar 2017 12:07:53 -0500 Subject: Adjust heights of the rj9 and teensy --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'README.md') diff --git a/README.md b/README.md index 91aed41..73cba81 100644 --- a/README.md +++ b/README.md @@ -21,7 +21,7 @@ I plan to try the 4x6 version or maybe the 4x5 version. The default has more ten I plan to use a Teensy 2++ in each half. Then, I have enough channels to wire straight to each key switch. Diodes are not needed. Then, I can connect them with a serial connection, and adapt the QMK firmware for the [Let's split keyboard](https://github.com/qmk/qmk_firmware/tree/master/keyboards/lets_split) that implements this approach. Each half can be master. -This doesn't have a bottom. I may or may not add one. I have many test prints to try. +This doesn't have a bottom. It has hex holes designed for 9- or 10-mm long M3 female-female spacers. Then, I can use a M3 wafer-head screws to connect a bottom plate. If wires aren't dangling, a bottom plate may not be needed. ## Assembly -- cgit v1.2.3