diff options
Diffstat (limited to 'src/dactyl_manuform_solid.py')
| -rw-r--r-- | src/dactyl_manuform_solid.py | 2373 |
1 files changed, 0 insertions, 2373 deletions
diff --git a/src/dactyl_manuform_solid.py b/src/dactyl_manuform_solid.py deleted file mode 100644 index 07e2450..0000000 --- a/src/dactyl_manuform_solid.py +++ /dev/null @@ -1,2373 +0,0 @@ -import solid as sl -import numpy as np -from numpy import pi -import os.path as path -import os -import json - -def deg2rad(degrees: float) -> float: - return degrees * pi / 180 - - -def rad2deg(rad: float) -> float: - return rad * 180 / pi - - - -## IMPORT DEFAULT CONFIG IN CASE NEW PARAMETERS EXIST -import src.generate_configuration as cfg -for item in cfg.shape_config: - locals()[item] = cfg.shape_config[item] - -## LOAD RUN CONFIGURATION FILE -with open('run_config.json', mode='r') as fid: - data = json.load(fid) -for item in data: - locals()[item] = data[item] - -if oled_mount_type is not None: - for item in oled_configurations[oled_mount_type]: - locals()[item] = oled_configurations[oled_mount_type][item] - -if nrows > 5: - column_style = column_style_gt5 - -centerrow = nrows - centerrow_offset - -lastrow = nrows - 1 -cornerrow = lastrow - 1 -lastcol = ncols - 1 - -# Derived values -if plate_style in ['NUB', 'HS_NUB']: - keyswitch_height = nub_keyswitch_height - keyswitch_width = nub_keyswitch_width -elif plate_style in ['UNDERCUT', 'HS_UNDERCUT']: - keyswitch_height = undercut_keyswitch_height - keyswitch_width = undercut_keyswitch_width -else: - keyswitch_height = hole_keyswitch_height - keyswitch_width = hole_keyswitch_width - -if plate_style in ['HS_UNDERCUT', 'HS_NUB', 'HS_HOLE']: - symmetry = "asymmetric" - plate_file = path.join("..", "src", r"hot_swap_plate.stl") - plate_offset = 0.0 - -mount_width = keyswitch_width + 3 -mount_height = keyswitch_height + 3 -mount_thickness = plate_thickness - -if oled_mount_type is not None: - left_wall_x_offset = oled_left_wall_x_offset_override - left_wall_z_offset = oled_left_wall_z_offset_override - - -spath = path.join("..", "things", save_dir) -if not path.isdir(spath): - os.mkdir(spath) - -def column_offset(column: int) -> list: - return column_offsets[column] - - -def single_plate(cylinder_segments=100, side="right"): - if plate_style in ['NUB', 'HS_NUB']: - top_wall = sl.cube([mount_width, 1.5, plate_thickness], center=True) - top_wall = sl.translate( - (0, (1.5 / 2) + (keyswitch_height / 2), plate_thickness / 2) - )(top_wall) - - left_wall = sl.cube([1.5, mount_height, plate_thickness], center=True) - left_wall = sl.translate( - ((1.5 / 2) + (keyswitch_width / 2), 0, plate_thickness / 2) - )(left_wall) - - side_nub = sl.cylinder(1, 2.75, segments=cylinder_segments, center=True) - side_nub = sl.rotate(rad2deg(pi / 2), [1, 0, 0])(side_nub) - side_nub = sl.translate((keyswitch_width / 2, 0, 1))(side_nub) - nub_cube = sl.cube([1.5, 2.75, plate_thickness], center=True) - nub_cube = sl.translate( - ((1.5 / 2) + (keyswitch_width / 2), 0, plate_thickness / 2) - )(nub_cube) - - side_nub = sl.hull()(side_nub, nub_cube) - - plate_half1 = top_wall + left_wall + side_nub - plate_half2 = plate_half1 - plate_half2 = sl.mirror([0, 1, 0])(plate_half2) - plate_half2 = sl.mirror([1, 0, 0])(plate_half2) - - plate = plate_half1 + plate_half2 - - - else: # 'HOLE' or default, square cutout for non-nub designs. - plate = sl.cube([mount_width, mount_height, mount_thickness], center=True) - plate = sl.translate((0.0, 0.0, mount_thickness / 2.0))(plate) - shape_cut = sl.cube([keyswitch_width, keyswitch_height, mount_thickness * 2], center=True) - shape_cut = sl.translate((0.0, 0.0, mount_thickness))(shape_cut) - plate = sl.difference()(plate, shape_cut) - - if plate_style in ['UNDERCUT', 'HS_UNDERCUT']: - undercut = sl.cube([ - keyswitch_width + 2 * clip_undercut, - keyswitch_height + 2 * clip_undercut, - mount_thickness - ], center=True) - - undercut = sl.translate((0.0, 0.0, -clip_thickness + mount_thickness / 2.0))(undercut) - - plate = sl.difference()(plate, undercut) - - if plate_file is not None: - socket = sl.import_(plate_file) - socket = sl.translate([0.0, 0.0, plate_thickness + plate_offset])(socket) - - plate = sl.union()(plate, socket) - - if side == "left": - plate = sl.mirror([-1, 0, 0])(plate) - - return plate - - -################ -## SA Keycaps ## -################ - -sa_length = 18.25 -sa_double_length = 37.5 - - -def sa_cap(Usize=1): - # MODIFIED TO NOT HAVE THE ROTATION. NEEDS ROTATION DURING ASSEMBLY - sa_length = 18.25 - - if Usize == 1: - bl2 = 18.5/2 - bw2 = 18.5/2 - m = 17 / 2 - pl2 = 6 - pw2 = 6 - - elif Usize == 2: - bl2 = sa_length - bw2 = sa_length / 2 - m = 0 - pl2 = 16 - pw2 = 6 - - elif Usize == 1.5: - bl2 = sa_length / 2 - bw2 = 27.94 / 2 - m = 0 - pl2 = 6 - pw2 = 11 - - - k1 = sl.polygon([[bw2, bl2], [bw2, -bl2], [-bw2, -bl2], [-bw2, bl2]]) - k1 = sl.linear_extrude(height=0.1, twist=0, convexity=0, center=True)(k1) - k1 = sl.translate([0, 0, 0.05])(k1) - k2 = sl.polygon([[pw2, pl2], [pw2, -pl2], [-pw2, -pl2], [-pw2, pl2]]) - k2 = sl.linear_extrude(height=0.1, twist=0, convexity=0, center=True)(k2) - k2 = sl.translate([0, 0, 12.0])(k2) - if m > 0: - m1 = sl.polygon([[m, m], [m, -m], [-m, -m], [-m, m]]) - m1 = sl.linear_extrude(height=0.1, twist=0, convexity=0, center=True)(m1) - m1 = sl.translate([0, 0, 6.0])(m1) - key_cap = sl.hull()(k1, k2, m1) - else: - key_cap = sl.hull()(k1, k2) - - # key_cap = sl.translate([0, 0, 5 + plate_thickness])(key_cap) - key_cap = sl.color([220 / 255, 163 / 255, 163 / 255, 1])(key_cap) - - return key_cap - - -######################### -## Placement Functions ## -######################### - - -def rotate_around_x(position, angle): - # print((position, angle)) - t_matrix = np.array( - [ - [1, 0, 0], - [0, np.cos(angle), -np.sin(angle)], - [0, np.sin(angle), np.cos(angle)], - ] - ) - return np.matmul(t_matrix, position) - - -def rotate_around_y(position, angle): - # print((position, angle)) - t_matrix = np.array( - [ - [np.cos(angle), 0, np.sin(angle)], - [0, 1, 0], - [-np.sin(angle), 0, np.cos(angle)], - ] - ) - return np.matmul(t_matrix, position) - - -cap_top_height = plate_thickness + sa_profile_key_height -row_radius = ((mount_height + extra_height) / 2) / (np.sin(alpha / 2)) + cap_top_height -column_radius = ( - ((mount_width + extra_width) / 2) / (np.sin(beta / 2)) - ) + cap_top_height -column_x_delta = -1 - column_radius * np.sin(beta) -column_base_angle = beta * (centercol - 2) - -def offset_for_column(col, row): - if pinky_1_5U and ( - col == lastcol and row <= last_1_5U and row >= first_1_5U - ): - return 4.7625 - else: - return 0 - -def apply_key_geometry( - shape, - translate_fn, - rotate_x_fn, - rotate_y_fn, - column, - row, - column_style=column_style, -): - column_angle = beta * (centercol - column) - - if column_style == "orthographic": - column_z_delta = column_radius * (1 - np.cos(column_angle)) - shape = translate_fn(shape, [0, 0, -row_radius]) - shape = rotate_x_fn(shape, alpha * (centerrow - row)) - shape = translate_fn(shape, [0, 0, row_radius]) - shape = rotate_y_fn(shape, column_angle) - shape = translate_fn( - shape, [-(column - centercol) * column_x_delta, 0, column_z_delta] - ) - shape = translate_fn(shape, column_offset(column)) - - elif column_style == "fixed": - shape = rotate_y_fn(shape, fixed_angles[column]) - shape = translate_fn(shape, [fixed_x[column], 0, fixed_z[column]]) - shape = translate_fn(shape, [0, 0, -(row_radius + fixed_z[column])]) - shape = rotate_x_fn(shape, alpha * (centerrow - row)) - shape = translate_fn(shape, [0, 0, row_radius + fixed_z[column]]) - shape = rotate_y_fn(shape, fixed_tenting) - shape = translate_fn(shape, [0, column_offset(column)[1], 0]) - - else: - shape = translate_fn(shape, [offset_for_column(column, row), 0, -row_radius]) - shape = rotate_x_fn(shape, alpha * (centerrow - row)) - shape = translate_fn(shape, [0, 0, row_radius]) - shape = translate_fn(shape, [0, 0, -column_radius]) - shape = rotate_y_fn(shape, column_angle) - shape = translate_fn(shape, [0, 0, column_radius]) - shape = translate_fn(shape, column_offset(column)) - - shape = rotate_y_fn(shape, tenting_angle) - shape = translate_fn(shape, [0, 0, keyboard_z_offset]) - - return shape - - -def translate(shape, xyz): - return sl.translate(xyz)(shape) - - -def x_rot(shape, angle): - return sl.rotate(rad2deg(angle), [1, 0, 0])(shape) - - -def y_rot(shape, angle): - return sl.rotate(rad2deg(angle), [0, 1, 0])(shape) - - -def key_place(shape, column, row): - return apply_key_geometry(shape, translate, x_rot, y_rot, column, row) - - -def add_translate(shape, xyz): - vals = [] - for i in range(len(shape)): - vals.append(shape[i] + xyz[i]) - return vals - - -def key_position(position, column, row): - return apply_key_geometry( - position, add_translate, rotate_around_x, rotate_around_y, column, row - ) - - -def key_holes(side="right"): - hole = single_plate(side=side) - holes = [] - for column in range(ncols): - for row in range(nrows): - if (column in [2, 3]) or (not row == lastrow): - holes.append(key_place(hole, column, row)) - - return sl.union()(*holes) - - -def caps(): - caps = [] - for column in range(ncols): - for row in range(nrows): - if (column in [2, 3]) or (not row == lastrow): - caps.append(key_place(sa_cap(), column, row)) - - return sl.union()(*caps) - - -#################### -## Web Connectors ## -#################### - - -def web_post(): - post = sl.cube([post_size, post_size, web_thickness], center=True) - post = sl.translate([0, 0, plate_thickness - (web_thickness / 2)])(post) - return post - - -post_adj = post_size / 2 - - -def web_post_tr(wide=False): - if wide: - w_divide = 1.2 - else: - w_divide = 2.0 - return sl.translate( - [(mount_width / w_divide) - post_adj, (mount_height / 2) - post_adj, 0] - )(web_post()) - -def web_post_tl(wide=False): - if wide: - w_divide = 1.2 - else: - w_divide = 2.0 - return sl.translate( - [-(mount_width / w_divide) + post_adj, (mount_height / 2) - post_adj, 0] - )(web_post()) - - -def web_post_bl(wide=False): - if wide: - w_divide = 1.2 - else: - w_divide = 2.0 - return sl.translate( - [-(mount_width / w_divide) + post_adj, -(mount_height / 2) + post_adj, 0] - )(web_post()) - - -def web_post_br(wide=False): - if wide: - w_divide = 1.2 - else: - w_divide = 2.0 - return sl.translate( - [(mount_width / w_divide) - post_adj, -(mount_height / 2) + post_adj, 0] - )(web_post()) - - - - -def triangle_hulls(shapes): - hulls = [] - for i in range(len(shapes) - 2): - hulls.append(sl.hull()(*shapes[i: (i + 3)])) - - return sl.union()(*hulls) - - -def connectors(): - hulls = [] - for column in range(ncols - 1): - for row in range(lastrow): # need to consider last_row? - # for row in range(nrows): # need to consider last_row? - places = [] - places.append(key_place(web_post_tl(), column + 1, row)) - places.append(key_place(web_post_tr(), column, row)) - places.append(key_place(web_post_bl(), column + 1, row)) - places.append(key_place(web_post_br(), column, row)) - hulls.append(triangle_hulls(places)) - - for column in range(ncols): - # for row in range(nrows-1): - for row in range(cornerrow): - places = [] - places.append(key_place(web_post_bl(), column, row)) - places.append(key_place(web_post_br(), column, row)) - places.append(key_place(web_post_tl(), column, row + 1)) - places.append(key_place(web_post_tr(), column, row + 1)) - hulls.append(triangle_hulls(places)) - - for column in range(ncols - 1): - # for row in range(nrows-1): # need to consider last_row? - for row in range(cornerrow): # need to consider last_row? - places = [] - places.append(key_place(web_post_br(), column, row)) - places.append(key_place(web_post_tr(), column, row + 1)) - places.append(key_place(web_post_bl(), column + 1, row)) - places.append(key_place(web_post_tl(), column + 1, row + 1)) - hulls.append(triangle_hulls(places)) - - return sl.union()(*hulls) - - -############ -## Thumbs ## -############ - - -def thumborigin(): - origin = key_position([mount_width / 2, -(mount_height / 2), 0], 1, cornerrow) - for i in range(len(origin)): - origin[i] = origin[i] + thumb_offsets[i] - return origin - - -def thumb_tr_place(shape): - shape = sl.rotate(10, [1, 0, 0])(shape) - shape = sl.rotate(-23, [0, 1, 0])(shape) - shape = sl.rotate(10, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-12, -16, 3])(shape) - return shape - - -def thumb_tl_place(shape): - shape = sl.rotate(10, [1, 0, 0])(shape) - shape = sl.rotate(-23, [0, 1, 0])(shape) - shape = sl.rotate(10, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-32, -15, -2])(shape) - return shape - - -def thumb_mr_place(shape): - shape = sl.rotate(-6, [1, 0, 0])(shape) - shape = sl.rotate(-34, [0, 1, 0])(shape) - shape = sl.rotate(48, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-29, -40, -13])(shape) - return shape - - -def thumb_ml_place(shape): - shape = sl.rotate(6, [1, 0, 0])(shape) - shape = sl.rotate(-34, [0, 1, 0])(shape) - shape = sl.rotate(40, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-51, -25, -12])(shape) - return shape - - -def thumb_br_place(shape): - shape = sl.rotate(-16, [1, 0, 0])(shape) - shape = sl.rotate(-33, [0, 1, 0])(shape) - shape = sl.rotate(54, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-37.8, -55.3, -25.3])(shape) - return shape - - -def thumb_bl_place(shape): - shape = sl.rotate(-4, [1, 0, 0])(shape) - shape = sl.rotate(-35, [0, 1, 0])(shape) - shape = sl.rotate(52, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-56.3, -43.3, -23.5])(shape) - return shape - - -def thumb_1x_layout(shape): - return sl.union()( - thumb_mr_place(shape), - thumb_ml_place(shape), - thumb_br_place(shape), - thumb_bl_place(shape), - ) - - -def thumb_15x_layout(shape): - return sl.union()(thumb_tr_place(shape), thumb_tl_place(shape)) - - -def double_plate_half(): - plate_height = (sa_double_length - mount_height) / 3 - top_plate = sl.cube([mount_width, plate_height, web_thickness], center=True) - top_plate = sl.translate( - [0, (plate_height + mount_height) / 2, plate_thickness - (web_thickness / 2)] - )(top_plate) - return top_plate - - -def double_plate(): - top_plate = double_plate_half() - return sl.union()(top_plate, sl.mirror([0, 1, 0])(top_plate)) - -def thumbcaps(): - if thumb_style == "MINI": - return mini_thumbcaps() - elif thumb_style == "CARBONFET": - return carbonfet_thumbcaps() - else: - return default_thumbcaps() - -def thumb(side="right"): - if thumb_style == "MINI": - return mini_thumb(side) - elif thumb_style == "CARBONFET": - return carbonfet_thumb(side) - else: - return default_thumb(side) - -def thumb_connectors(): - if thumb_style == "MINI": - return mini_thumb_connectors() - elif thumb_style == "CARBONFET": - return carbonfet_thumb_connectors() - else: - return default_thumb_connectors() - - -def default_thumbcaps(): - t1 = thumb_1x_layout(sa_cap(1)) - t15 = thumb_15x_layout(sl.rotate(pi / 2, [0, 0, 1])(sa_cap(1.5))) - return t1 + t15 - - - -def default_thumb(side="right"): - - shape = thumb_1x_layout(sl.rotate([0.0, 0.0, -90])(single_plate(side=side))) - shape += thumb_15x_layout(sl.rotate([0.0, 0.0, -90])(single_plate(side=side))) - shape += thumb_15x_layout(double_plate()) - - return shape - - -def thumb_post_tr(): - return sl.translate( - [(mount_width / 2) - post_adj, (mount_height / 1.15) - post_adj, 0] - )(web_post()) - - -def thumb_post_tl(): - return sl.translate( - [-(mount_width / 2) + post_adj, (mount_height / 1.15) - post_adj, 0] - )(web_post()) - - -def thumb_post_bl(): - return sl.translate( - [-(mount_width / 2) + post_adj, -(mount_height / 1.15) + post_adj, 0] - )(web_post()) - - -def thumb_post_br(): - return sl.translate( - [(mount_width / 2) - post_adj, -(mount_height / 1.15) + post_adj, 0] - )(web_post()) - - -def default_thumb_connectors(): - hulls = [] - - # Top two - hulls.append( - triangle_hulls( - [ - thumb_tl_place(thumb_post_tr()), - thumb_tl_place(thumb_post_br()), - thumb_tr_place(thumb_post_tl()), - thumb_tr_place(thumb_post_bl()), - ] - ) - ) - - # bottom two on the right - hulls.append( - triangle_hulls( - [ - thumb_br_place(web_post_tr()), - thumb_br_place(web_post_br()), - thumb_mr_place(web_post_tl()), - thumb_mr_place(web_post_bl()), - ] - ) - ) - - # bottom two on the left - hulls.append( - triangle_hulls( - [ - thumb_br_place(web_post_tr()), - thumb_br_place(web_post_br()), - thumb_mr_place(web_post_tl()), - thumb_mr_place(web_post_bl()), - ] - ) - ) - # centers of the bottom four - hulls.append( - triangle_hulls( - [ - thumb_bl_place(web_post_tr()), - thumb_bl_place(web_post_br()), - thumb_ml_place(web_post_tl()), - thumb_ml_place(web_post_bl()), - ] - ) - ) - - # top two to the middle two, starting on the left - hulls.append( - triangle_hulls( - [ - thumb_br_place(web_post_tl()), - thumb_bl_place(web_post_bl()), - thumb_br_place(web_post_tr()), - thumb_bl_place(web_post_br()), - thumb_mr_place(web_post_tl()), - thumb_ml_place(web_post_bl()), - thumb_mr_place(web_post_tr()), - thumb_ml_place(web_post_br()), - ] - ) - ) - - # top two to the main keyboard, starting on the left - hulls.append( - triangle_hulls( - [ - thumb_tl_place(thumb_post_tl()), - thumb_ml_place(web_post_tr()), - thumb_tl_place(thumb_post_bl()), - thumb_ml_place(web_post_br()), - thumb_tl_place(thumb_post_br()), - thumb_mr_place(web_post_tr()), - thumb_tr_place(thumb_post_bl()), - thumb_mr_place(web_post_br()), - thumb_tr_place(thumb_post_br()), - ] - ) - ) - - hulls.append( - triangle_hulls( - [ - thumb_tl_place(thumb_post_tl()), - key_place(web_post_bl(), 0, cornerrow), - thumb_tl_place(thumb_post_tr()), - key_place(web_post_br(), 0, cornerrow), - thumb_tr_place(thumb_post_tl()), - key_place(web_post_bl(), 1, cornerrow), - thumb_tr_place(thumb_post_tr()), - key_place(web_post_br(), 1, cornerrow), - key_place(web_post_tl(), 2, lastrow), - key_place(web_post_bl(), 2, lastrow), - thumb_tr_place(thumb_post_tr()), - key_place(web_post_bl(), 2, lastrow), - thumb_tr_place(thumb_post_br()), - key_place(web_post_br(), 2, lastrow), - key_place(web_post_bl(), 3, lastrow), - key_place(web_post_tr(), 2, lastrow), - key_place(web_post_tl(), 3, lastrow), - key_place(web_post_bl(), 3, cornerrow), - key_place(web_post_tr(), 3, lastrow), - key_place(web_post_br(), 3, cornerrow), - key_place(web_post_bl(), 4, cornerrow), - ] - ) - ) - - hulls.append( - triangle_hulls( - [ - key_place(web_post_br(), 1, cornerrow), - key_place(web_post_tl(), 2, lastrow), - key_place(web_post_bl(), 2, cornerrow), - key_place(web_post_tr(), 2, lastrow), - key_place(web_post_br(), 2, cornerrow), - key_place(web_post_bl(), 3, cornerrow), - ] - ) - ) - - hulls.append( - triangle_hulls( - [ - key_place(web_post_tr(), 3, lastrow), - key_place(web_post_br(), 3, lastrow), - key_place(web_post_tr(), 3, lastrow), - key_place(web_post_bl(), 4, cornerrow), - ] - ) - ) - - return sl.union()(*hulls) - - -############################ -# MINI THUMB CLUSTER -############################ - - -def mini_thumb_tr_place(shape): - shape = sl.rotate(14, [1, 0, 0])(shape) - shape = sl.rotate(-15, [0, 1, 0])(shape) - shape = sl.rotate(10, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-15, -10, 5])(shape) - return shape - - -def mini_thumb_tl_place(shape): - shape = sl.rotate(10, [1, 0, 0])(shape) - shape = sl.rotate(-23, [0, 1, 0])(shape) - shape = sl.rotate(25, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-35, -16, -2])(shape) - return shape - - -def mini_thumb_mr_place(shape): - shape = sl.rotate(10, [1, 0, 0])(shape) - shape = sl.rotate(-23, [0, 1, 0])(shape) - shape = sl.rotate(25, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-23, -34, -6])(shape) - return shape - - -def mini_thumb_br_place(shape): - shape = sl.rotate(6, [1, 0, 0])(shape) - shape = sl.rotate(-34, [0, 1, 0])(shape) - shape = sl.rotate(35, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-39, -43, -16])(shape) - return shape - - -def mini_thumb_bl_place(shape): - shape = sl.rotate(6, [1, 0, 0])(shape) - shape = sl.rotate(-32, [0, 1, 0])(shape) - shape = sl.rotate(35, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-51, -25, -11.5])(shape) - return shape - - -def mini_thumb_1x_layout(shape): - return sl.union()( - mini_thumb_mr_place(shape), - mini_thumb_br_place(shape), - mini_thumb_tl_place(shape), - mini_thumb_bl_place(shape), - ) - - -def mini_thumb_15x_layout(shape): - return sl.union()(mini_thumb_tr_place(shape)) - - -def mini_thumbcaps(): - t1 = mini_thumb_1x_layout(sa_cap(1)) - t15 = mini_thumb_15x_layout(sl.rotate(pi / 2, [0, 0, 1])(sa_cap(1))) - return t1 + t15 - - -def mini_thumb(side="right"): - - # shape = thumb_1x_layout(sl.rotate([0.0, 0.0, -90])(single_plate(side=side))) - # shape += thumb_15x_layout(sl.rotate([0.0, 0.0, -90])(single_plate(side=side))) - shape = mini_thumb_1x_layout(single_plate(side=side)) - shape += mini_thumb_15x_layout(single_plate(side=side)) - - return shape - - -def mini_thumb_post_tr(): - return sl.translate( - [(mount_width / 2) - post_adj, (mount_height / 2) - post_adj, 0] - )(web_post()) - - -def mini_thumb_post_tl(): - return sl.translate( - [-(mount_width / 2) + post_adj, (mount_height / 2) - post_adj, 0] - )(web_post()) - - -def mini_thumb_post_bl(): - return sl.translate( - [-(mount_width / 2) + post_adj, -(mount_height / 2) + post_adj, 0] - )(web_post()) - - -def mini_thumb_post_br(): - return sl.translate( - [(mount_width / 2) - post_adj, -(mount_height / 2) + post_adj, 0] - )(web_post()) - - -def mini_thumb_connectors(): - hulls = [] - - # Top two - hulls.append( - triangle_hulls( - [ - mini_thumb_tl_place(web_post_tr()), - mini_thumb_tl_place(web_post_br()), - mini_thumb_tr_place(mini_thumb_post_tl()), - mini_thumb_tr_place(mini_thumb_post_bl()), - ] - ) - ) - - # bottom two on the right - hulls.append( - triangle_hulls( - [ - mini_thumb_br_place(web_post_tr()), - mini_thumb_br_place(web_post_br()), - mini_thumb_mr_place(web_post_tl()), - mini_thumb_mr_place(web_post_bl()), - ] - ) - ) - - # bottom two on the left - hulls.append( - triangle_hulls( - [ - mini_thumb_mr_place(web_post_tr()), - mini_thumb_mr_place(web_post_br()), - mini_thumb_tr_place(mini_thumb_post_br()), - ] - ) - ) - - # between top and bottom row - hulls.append( - triangle_hulls( - [ - mini_thumb_br_place(web_post_tl()), - mini_thumb_bl_place(web_post_bl()), - mini_thumb_br_place(web_post_tr()), - mini_thumb_bl_place(web_post_br()), - mini_thumb_mr_place(web_post_tl()), - mini_thumb_tl_place(web_post_bl()), - mini_thumb_mr_place(web_post_tr()), - mini_thumb_tl_place(web_post_br()), - mini_thumb_tr_place(web_post_bl()), - mini_thumb_mr_place(web_post_tr()), - mini_thumb_tr_place(web_post_br()), - ] - ) - ) - # top two to the main keyboard, starting on the left - hulls.append( - triangle_hulls( - [ - mini_thumb_tl_place(web_post_tl()), - mini_thumb_bl_place(web_post_tr()), - mini_thumb_tl_place(web_post_bl()), - mini_thumb_bl_place(web_post_br()), - mini_thumb_mr_place(web_post_tr()), - mini_thumb_tl_place(web_post_bl()), - mini_thumb_tl_place(web_post_br()), - mini_thumb_mr_place(web_post_tr()), - ] - ) - ) - # top two to the main keyboard, starting on the left - hulls.append( - triangle_hulls( - [ - mini_thumb_tl_place(web_post_tl()), - key_place(web_post_bl(), 0, cornerrow), - mini_thumb_tl_place(web_post_tr()), - key_place(web_post_br(), 0, cornerrow), - mini_thumb_tr_place(mini_thumb_post_tl()), - key_place(web_post_bl(), 1, cornerrow), - mini_thumb_tr_place(mini_thumb_post_tr()), - key_place(web_post_br(), 1, cornerrow), - key_place(web_post_tl(), 2, lastrow), - key_place(web_post_bl(), 2, lastrow), - mini_thumb_tr_place(mini_thumb_post_tr()), - key_place(web_post_bl(), 2, lastrow), - mini_thumb_tr_place(mini_thumb_post_br()), - key_place(web_post_br(), 2, lastrow), - key_place(web_post_bl(), 3, lastrow), - key_place(web_post_tr(), 2, lastrow), - key_place(web_post_tl(), 3, lastrow), - key_place(web_post_bl(), 3, cornerrow), - key_place(web_post_tr(), 3, lastrow), - key_place(web_post_br(), 3, cornerrow), - ] - ) - ) - - hulls.append( - triangle_hulls( - [ - key_place(web_post_br(), 1, cornerrow), - key_place(web_post_tl(), 2, lastrow), - key_place(web_post_bl(), 2, cornerrow), - key_place(web_post_tr(), 2, lastrow), - key_place(web_post_br(), 2, cornerrow), - key_place(web_post_bl(), 3, cornerrow), - ] - ) - ) - - # hulls.append( - # triangle_hulls( - # [ - # key_place(web_post_tr(), 3, lastrow), - # key_place(web_post_br(), 3, lastrow), - # key_place(web_post_tr(), 3, lastrow), - # key_place(web_post_bl(), 4, cornerrow), - # ] - # ) - # ) - - return sl.union()(*hulls) - - -############################ -# Carbonfet THUMB CLUSTER -############################ - - -def carbonfet_thumb_tl_place(shape): - shape = sl.rotate(10, [1, 0, 0])(shape) - shape = sl.rotate(-24, [0, 1, 0])(shape) - shape = sl.rotate(10, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-13, -9.8, 4])(shape) - - return shape - -def carbonfet_thumb_tr_place(shape): - shape = sl.rotate(6, [1, 0, 0])(shape) - shape = sl.rotate(-24, [0, 1, 0])(shape) - shape = sl.rotate(10, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-7.5, -29.5, 0])(shape) - return shape - -def carbonfet_thumb_ml_place(shape): - shape = sl.rotate(8, [1, 0, 0])(shape) - shape = sl.rotate(-31, [0, 1, 0])(shape) - shape = sl.rotate(14, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-30.5, -17, -6])(shape) - return shape - -def carbonfet_thumb_mr_place(shape): - shape = sl.rotate(4, [1, 0, 0])(shape) - shape = sl.rotate(-31, [0, 1, 0])(shape) - shape = sl.rotate(14, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-22.2, -41, -10.3])(shape) - return shape - -def carbonfet_thumb_br_place(shape): - shape = sl.rotate(2, [1, 0, 0])(shape) - shape = sl.rotate(-37, [0, 1, 0])(shape) - shape = sl.rotate(18, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-37, -46.4, -22])(shape) - return shape - -def carbonfet_thumb_bl_place(shape): - shape = sl.rotate(6, [1, 0, 0])(shape) - shape = sl.rotate(-37, [0, 1, 0])(shape) - shape = sl.rotate(18, [0, 0, 1])(shape) - shape = sl.translate(thumborigin())(shape) - shape = sl.translate([-47, -23, -19])(shape) - return shape - - -def carbonfet_thumb_1x_layout(shape): - return sl.union()( - # carbonfet_thumb_tr_place(sl.rotate(pi / 2, [0, 0, 1])(shape)), - carbonfet_thumb_tr_place(shape), - carbonfet_thumb_mr_place(shape), - carbonfet_thumb_br_place(shape), - # carbonfet_thumb_tl_place(sl.rotate(pi / 2, [0, 0, 1])(shape)), - carbonfet_thumb_tl_place(shape), - ) - - -def carbonfet_thumb_15x_layout(shape): - return sl.union()( - carbonfet_thumb_bl_place(shape), - carbonfet_thumb_ml_place(shape) - ) - - -def carbonfet_thumbcaps(): - t1 = carbonfet_thumb_1x_layout(sa_cap(1)) - t15 = carbonfet_thumb_15x_layout(sl.rotate(pi / 2, [0, 0, 1])(sa_cap(1.5))) - return t1 + t15 - - -def carbonfet_thumb(side="right"): - # shape = thumb_1x_layout(sl.rotate([0.0, 0.0, -90])(single_plate(side=side))) - # shape += thumb_15x_layout(sl.rotate([0.0, 0.0, -90])(single_plate(side=side))) - shape = carbonfet_thumb_1x_layout(single_plate(side=side)) - shape += carbonfet_thumb_15x_layout(double_plate_half()) - shape += carbonfet_thumb_15x_layout(single_plate(side=side)) - - return shape - -def carbonfet_thumb_post_tr(): - return sl.translate( - [(mount_width / 2) - post_adj, (mount_height / 1.15) - post_adj, 0] - )(web_post()) - - -def carbonfet_thumb_post_tl(): - return sl.translate( - [-(mount_width / 2) + post_adj, (mount_height / 1.15) - post_adj, 0] - )(web_post()) - - -def carbonfet_thumb_post_bl(): - return sl.translate( - [-(mount_width / 2) + post_adj, -(mount_height / 1.15) + post_adj, 0] - )(web_post()) - - -def carbonfet_thumb_post_br(): - return sl.translate( - [(mount_width / 2) - post_adj, -(mount_height / 2) + post_adj, 0] - )(web_post()) - -def carbonfet_thumb_connectors(): - hulls = [] - - # Top two - hulls.append( - triangle_hulls( - [ - carbonfet_thumb_tl_place(web_post_tl()), - carbonfet_thumb_tl_place(web_post_bl()), - carbonfet_thumb_ml_place(carbonfet_thumb_post_tr()), - carbonfet_thumb_ml_place(web_post_br()), - ] - ) - ) - - hulls.append( - triangle_hulls( - [ - carbonfet_thumb_ml_place(carbonfet_thumb_post_tl()), - carbonfet_thumb_ml_place(web_post_bl()), - carbonfet_thumb_bl_place(carbonfet_thumb_post_tr()), - carbonfet_thumb_bl_place(web_post_br()), - ] - ) - ) - - # bottom two on the right - hulls.append( - triangle_hulls( - [ - carbonfet_thumb_br_place(web_post_tr()), - carbonfet_thumb_br_place(web_post_br()), - carbonfet_thumb_mr_place(web_post_tl()), - carbonfet_thumb_mr_place(web_post_bl()), - ] - ) - ) - - # bottom two on the left - hulls.append( - triangle_hulls( - [ - carbonfet_thumb_mr_place(web_post_tr()), - carbonfet_thumb_mr_place(web_post_br()), - carbonfet_thumb_tr_place(web_post_tl()), - carbonfet_thumb_tr_place(web_post_bl()), - ] - ) - ) - hulls.append( - triangle_hulls( - [ - carbonfet_thumb_tr_place(web_post_br()), - carbonfet_thumb_tr_place(web_post_bl()), - carbonfet_thumb_mr_place(web_post_br()), - ] - ) - ) - - # between top and bottom row - hulls.append( - triangle_hulls( - [ - carbonfet_thumb_br_place(web_post_tl()), - carbonfet_thumb_bl_place(web_post_bl()), - carbonfet_thumb_br_place(web_post_tr()), - carbonfet_thumb_bl_place(web_post_br()), - carbonfet_thumb_mr_place(web_post_tl()), - carbonfet_thumb_ml_place(web_post_bl()), - carbonfet_thumb_mr_place(web_post_tr()), - carbonfet_thumb_ml_place(web_post_br()), - carbonfet_thumb_tr_place(web_post_tl()), - carbonfet_thumb_tl_place(web_post_bl()), - carbonfet_thumb_tr_place(web_post_tr()), - carbonfet_thumb_tl_place(web_post_br()), - ] - ) - ) - # top two to the main keyboard, starting on the left - hulls.append( - triangle_hulls( - [ - carbonfet_thumb_ml_place(carbonfet_thumb_post_tl()), - key_place(web_post_bl(), 0, cornerrow), - carbonfet_thumb_ml_place(carbonfet_thumb_post_tr()), - key_place(web_post_br(), 0, cornerrow), - carbonfet_thumb_tl_place(web_post_tl()), - key_place(web_post_bl(), 1, cornerrow), - carbonfet_thumb_tl_place(web_post_tr()), - key_place(web_post_br(), 1, cornerrow), - key_place(web_post_tl(), 2, lastrow), - key_place(web_post_bl(), 2, lastrow), - carbonfet_thumb_tl_place(web_post_tr()), - key_place(web_post_bl(), 2, lastrow), - carbonfet_thumb_tl_place(web_post_br()), - key_place(web_post_br(), 2, lastrow), - key_place(web_post_bl(), 3, lastrow), - carbonfet_thumb_tl_place(web_post_br()), - carbonfet_thumb_tr_place(web_post_tr()), - ] - ) - ) - - hulls.append( - triangle_hulls( - [ - key_place(web_post_tr(), 3, lastrow), - key_place(web_post_br(), 3, cornerrow), - key_place(web_post_tl(), 3, lastrow), - key_place(web_post_bl(), 3, cornerrow), - ] - ) - ) - - hulls.append( - triangle_hulls( - [ - key_place(web_post_tr(), 2, lastrow), - key_place(web_post_br(), 2, lastrow), - key_place(web_post_tl(), 3, lastrow), - key_place(web_post_bl(), 3, lastrow), - ] - ) - ) - - hulls.append( - triangle_hulls( - [ - carbonfet_thumb_tr_place(web_post_br()), - carbonfet_thumb_tr_place(web_post_tr()), - key_place(web_post_bl(), 3, lastrow), - ] - ) - ) - - hulls.append( - triangle_hulls( - [ - key_place(web_post_br(), 1, cornerrow), - key_place(web_post_tl(), 2, lastrow), - key_place(web_post_bl(), 2, cornerrow), - key_place(web_post_tr(), 2, lastrow), - key_place(web_post_br(), 2, cornerrow), - key_place(web_post_tl(), 3, lastrow), - key_place(web_post_bl(), 3, cornerrow), - ] - ) - ) - - hulls.append( - triangle_hulls( - [ - key_place(web_post_tr(), 3, lastrow), - key_place(web_post_br(), 3, lastrow), - key_place(web_post_bl(), 4, cornerrow), - ] - ) - ) - - hulls.append( - triangle_hulls( - [ - key_place(web_post_tr(), 3, lastrow), - key_place(web_post_br(), 3, cornerrow), - key_place(web_post_bl(), 4, cornerrow), - ] - ) - ) - - - return sl.union()(*hulls) - -########## -## Case ## -########## - - -def bottom_hull(p, height=0.001): - shape = None - for item in p: - proj = sl.projection()(p) - t_shape = sl.linear_extrude(height=height, twist=0, convexity=0, center=True)( - proj - ) - t_shape = sl.translate([0, 0, height / 2 - 10])(t_shape) - if shape is None: - shape = t_shape - shape = sl.hull()(p, shape, t_shape) - return shape - - -def left_key_position(row, direction): - pos = np.array( - key_position([-mount_width * 0.5, direction * mount_height * 0.5, 0], 0, row) - ) - return list(pos - np.array([left_wall_x_offset, 0, left_wall_z_offset])) - - -def left_key_place(shape, row, direction): - pos = left_key_position(row, direction) - return sl.translate(pos)(shape) - - -def wall_locate1(dx, dy): - return [dx * wall_thickness, dy * wall_thickness, -1] - - -def wall_locate2(dx, dy): - return [dx * wall_x_offset, dy * wall_y_offset, -wall_z_offset] - - -def wall_locate3(dx, dy, back=False): - if back: - return [ - dx * (wall_x_offset + wall_base_x_thickness), - dy * (wall_y_offset + wall_base_back_thickness), - -wall_z_offset, - ] - else: - return [ - dx * (wall_x_offset + wall_base_x_thickness), - dy * (wall_y_offset + wall_base_y_thickness), - -wall_z_offset, - ] - - -def wall_brace(place1, dx1, dy1, post1, place2, dx2, dy2, post2, back=False): - hulls = [] - - hulls.append(place1(post1)) - hulls.append(place1(sl.translate(wall_locate1(dx1, dy1))(post1))) - hulls.append(place1(sl.translate(wall_locate2(dx1, dy1))(post1))) - hulls.append(place1(sl.translate(wall_locate3(dx1, dy1, back))(post1))) - - hulls.append(place2(post2)) - hulls.append(place2(sl.translate(wall_locate1(dx2, dy2))(post2))) - hulls.append(place2(sl.translate(wall_locate2(dx2, dy2))(post2))) - hulls.append(place2(sl.translate(wall_locate3(dx2, dy2, back))(post2))) - shape1 = sl.hull()(*hulls) - - hulls = [] - hulls.append(place1(sl.translate(wall_locate2(dx1, dy1))(post1))) - hulls.append(place1(sl.translate(wall_locate3(dx1, dy1, back))(post1))) - hulls.append(place2(sl.translate(wall_locate2(dx2, dy2))(post2))) - hulls.append(place2(sl.translate(wall_locate3(dx2, dy2, back))(post2))) - shape2 = bottom_hull(hulls) - - return shape1 + shape2 - - -def key_wall_brace(x1, y1, dx1, dy1, post1, x2, y2, dx2, dy2, post2, back=False): - return wall_brace( - (lambda shape: key_place(shape, x1, y1)), - dx1, - dy1, - post1, - (lambda shape: key_place(shape, x2, y2)), - dx2, - dy2, - post2, - back - ) - - -def back_wall(): - x = 0 - shape = key_wall_brace(x, 0, 0, 1, web_post_tl(), x, 0, 0, 1, web_post_tr(), back=True) - for i in range(ncols - 1): - x = i + 1 - shape += key_wall_brace(x, 0, 0, 1, web_post_tl(), x, 0, 0, 1, web_post_tr(), back=True) - shape += key_wall_brace( - x, 0, 0, 1, web_post_tl(), x - 1, 0, 0, 1, web_post_tr(), back=True - ) - shape += key_wall_brace( - lastcol, 0, 0, 1, web_post_tr(), lastcol, 0, 1, 0, web_post_tr(), back=True - ) - return shape - - -def right_wall(): - if pinky_1_5U: - if first_1_5U_row > 0: - shape = key_wall_brace( - lastcol, 0, 0, 1, web_post_tr(), lastcol, 0, 1, 0, web_post_tr()) - else: - shape = key_wall_brace( - lastcol, 0, 0, 1, web_post_tr(), lastcol, 0, 0, 1, web_post_tr(wide=True)) - shape += key_wall_brace( - lastcol, 0, 0, 1, web_post_tr(), lastcol, 0, 1, 0, web_post_tr(wide=True)) - - shape += key_wall_brace( - lastcol, 0, 0, -1, web_post_br(), lastcol, 0, 1, 0, web_post_br()) - - if first_1_5U_row >= 2: - for y in range(first_1_5U_row - 1): - shape += key_wall_brace( - lastcol, y, 1, 0, web_post_tr(), lastcol, y, 1, 0, web_post_br()) - shape += key_wall_brace( - lastcol, y, 1, 0, web_post_br(), lastcol, y-1, 1, 0, web_post_tr()) - - if first_1_5U_row >= 1: - for i in range(2): - y = first_1_5U_row - 1 + i - shape += key_wall_brace( - lastcol, y, 1, 0, web_post_tr(), lastcol, y-1, 1, 0, web_post_tr(wide=True)) - - for i in range(2): - y = first_1_5U_row + i - shape += key_wall_brace( - lastcol, y, 1, 0, web_post_tr(wide=True), lastcol, y, 1, 0, web_post_br(wide=True)) - - for i in range(first_1_5U_row - last_1_5U_row): - y = first_1_5U_row + i - shape += key_wall_brace( - lastcol, y+1, 1, 0, web_post_tr(wide=True), lastcol, y, 1, 0, web_post_br(wide=True)) - - if first_1_5U_row >= 1: - for i in range(2): - y = first_1_5U_row - 1 + i - shape += key_wall_brace( - lastcol, y, 1, 0, web_post_tr(), lastcol, y-1, 1, 0, web_post_tr(wide=True)) - - else: - y = 0 - shape = key_wall_brace( - lastcol, y, 1, 0, web_post_tr(), lastcol, y, 1, 0, web_post_br() - ) - for i in range(lastrow - 1): - y = i + 1 - shape += key_wall_brace( - lastcol, y - 1, 1, 0, web_post_br(), lastcol, y, 1, 0, web_post_tr()) - - shape += key_wall_brace( - lastcol, y, 1, 0, web_post_tr(), lastcol, y, 1, 0, web_post_br()) - - shape += key_wall_brace( - lastcol, cornerrow, 0, -1, web_post_br(), lastcol, cornerrow, 1, 0, web_post_br()) - - return shape - - -def left_wall(): - shape = wall_brace( - (lambda sh: key_place(sh, 0, 0)), - 0, - 1, - web_post_tl(), - (lambda sh: left_key_place(sh, 0, 1)), - 0, - 1, - web_post(), - ) - - shape += wall_brace( - (lambda sh: left_key_place(sh, 0, 1)), - 0, - 1, - web_post(), - (lambda sh: left_key_place(sh, 0, 1)), - -1, - 0, - web_post(), - ) - - for i in range(lastrow): - y = i - temp_shape1 = wall_brace( - (lambda sh: left_key_place(sh, y, 1)), - -1, - 0, - web_post(), - (lambda sh: left_key_place(sh, y, -1)), - -1, - 0, - web_post(), - ) - temp_shape2 = sl.hull()( - key_place(web_post_tl(), 0, y), - key_place(web_post_bl(), 0, y), - left_key_place(web_post(), y, 1), - left_key_place(web_post(), y, -1), - ) - shape += temp_shape1 + temp_shape2 - - for i in range(lastrow - 1): - y = i + 1 - temp_shape1 = wall_brace( - (lambda sh: left_key_place(sh, y - 1, -1)), - -1, - 0, - web_post(), - (lambda sh: left_key_place(sh, y, 1)), - -1, - 0, - web_post(), - ) - temp_shape2 = sl.hull()( - key_place(web_post_tl(), 0, y), - key_place(web_post_bl(), 0, y - 1), - left_key_place(web_post(), y, 1), - left_key_place(web_post(), y - 1, -1), - ) - shape += temp_shape1 + temp_shape2 - - return shape - - -def front_wall(): - shape = key_wall_brace( - lastcol, 0, 0, 1, web_post_tr(), lastcol, 0, 1, 0, web_post_tr() - ) - shape += key_wall_brace( - 3, lastrow, 0, -1, web_post_bl(), 3, lastrow, 0.5, -1, web_post_br() - ) - shape += key_wall_brace( - 3, lastrow, 0.5, -1, web_post_br(), 4, cornerrow, 1, -1, web_post_bl() - ) - for i in range(ncols - 4): - x = i + 4 - shape += key_wall_brace( - x, cornerrow, 0, -1, web_post_bl(), x, cornerrow, 0, -1, web_post_br() - ) - for i in range(ncols - 5): - x = i + 5 - shape += key_wall_brace( - x, cornerrow, 0, -1, web_post_bl(), x - 1, cornerrow, 0, -1, web_post_br() - ) - - return shape - -def thumb_walls(): - if thumb_style == "MINI": - return mini_thumb_walls() - elif thumb_style == "CARBONFET": - return carbonfet_thumb_walls() - else: - return default_thumb_walls() - -def thumb_connection(): - if thumb_style == "MINI": - return mini_thumb_connection() - elif thumb_style == "CARBONFET": - return carbonfet_thumb_connection() - else: - return default_thumb_connection() - -def default_thumb_walls(): - # thumb, walls - shape = wall_brace(thumb_mr_place, 0, -1, web_post_br(), thumb_tr_place, 0, -1, thumb_post_br()) - shape += wall_brace(thumb_mr_place, 0, -1, web_post_br(), thumb_mr_place, 0, -1, web_post_bl()) - shape += wall_brace(thumb_br_place, 0, -1, web_post_br(), thumb_br_place, 0, -1, web_post_bl()) - shape += wall_brace(thumb_ml_place, -0.3, 1, web_post_tr(), thumb_ml_place, 0, 1, web_post_tl()) - shape += wall_brace(thumb_bl_place, 0, 1, web_post_tr(), thumb_bl_place, 0, 1, web_post_tl()) - shape += wall_brace(thumb_br_place, -1, 0, web_post_tl(), thumb_br_place, -1, 0, web_post_bl()) - shape += wall_brace(thumb_bl_place, -1, 0, web_post_tl(), thumb_bl_place, -1, 0, web_post_bl()) - # thumb, corners - shape += wall_brace(thumb_br_place, -1, 0, web_post_bl(), thumb_br_place, 0, -1, web_post_bl()) - shape += wall_brace(thumb_bl_place, -1, 0, web_post_tl(), thumb_bl_place, 0, 1, web_post_tl()) - # thumb, tweeners - shape += wall_brace(thumb_mr_place, 0, -1, web_post_bl(), thumb_br_place, 0, -1, web_post_br()) - shape += wall_brace(thumb_ml_place, 0, 1, web_post_tl(), thumb_bl_place, 0, 1, web_post_tr()) - shape += wall_brace(thumb_bl_place, -1, 0, web_post_bl(), thumb_br_place, -1, 0, web_post_tl()) - shape += wall_brace(thumb_tr_place, 0, -1, thumb_post_br(), (lambda sh: key_place(sh, 3, lastrow)), 0, -1, web_post_bl()) - - return shape - -def default_thumb_connection(): - # clunky bit on the top left thumb connection (normal connectors don't work well) - shape = bottom_hull( - [ - left_key_place(sl.translate(wall_locate2(-1, 0))(web_post()), cornerrow, -1), - left_key_place(sl.translate(wall_locate3(-1, 0))(web_post()), cornerrow, -1), - thumb_ml_place(sl.translate(wall_locate2(-0.3, 1))(web_post_tr())), - thumb_ml_place(sl.translate(wall_locate3(-0.3, 1))(web_post_tr())), - ] - ) - - shape += sl.hull()( - [ - left_key_place(sl.translate(wall_locate2(-1, 0))(web_post()), cornerrow, -1), - left_key_place(sl.translate(wall_locate3(-1, 0))(web_post()), cornerrow, -1), - thumb_ml_place(sl.translate(wall_locate2(-0.3, 1))(web_post_tr())), - thumb_ml_place(sl.translate(wall_locate3(-0.3, 1))(web_post_tr())), - thumb_tl_place(thumb_post_tl()), - ] - ) - - shape += sl.hull()( - [ - left_key_place(web_post(), cornerrow, -1), - left_key_place(sl.translate(wall_locate1(-1, 0))(web_post()), cornerrow, -1), - left_key_place(sl.translate(wall_locate2(-1, 0))(web_post()), cornerrow, -1), - left_key_place(sl.translate(wall_locate3(-1, 0))(web_post()), cornerrow, -1), - thumb_tl_place(thumb_post_tl()), - ] - ) - - shape += sl.hull()( - [ - left_key_place(web_post(), cornerrow, -1), - left_key_place(sl.translate(wall_locate1(-1, 0))(web_post()), cornerrow, -1), - key_place(web_post_bl(), 0, cornerrow), - # key_place(sl.translate(wall_locate1(-1, 0))(web_post_bl()), 0, cornerrow), - key_place(sl.translate(wall_locate1(0, 0))(web_post_bl()), 0, cornerrow), - thumb_tl_place(thumb_post_tl()), - ] - ) - - shape += sl.hull()( - [ - thumb_ml_place(web_post_tr()), - thumb_ml_place(sl.translate(wall_locate1(-0.3, 1))(web_post_tr())), - thumb_ml_place(sl.translate(wall_locate2(-0.3, 1))(web_post_tr())), - thumb_ml_place(sl.translate(wall_locate3(-0.3, 1))(web_post_tr())), - thumb_tl_place(thumb_post_tl()), - ] - ) - - return shape - - -def mini_thumb_walls(): - # thumb, walls - shape = wall_brace(mini_thumb_mr_place, 0, -1, web_post_br(), mini_thumb_tr_place, 0, -1, mini_thumb_post_br()) - shape += wall_brace(mini_thumb_mr_place, 0, -1, web_post_br(), mini_thumb_mr_place, 0, -1, web_post_bl()) - shape += wall_brace(mini_thumb_br_place, 0, -1, web_post_br(), mini_thumb_br_place, 0, -1, web_post_bl()) - shape += wall_brace(mini_thumb_bl_place, 0, 1, web_post_tr(), mini_thumb_bl_place, 0, 1, web_post_tl()) - shape += wall_brace(mini_thumb_br_place, -1, 0, web_post_tl(), mini_thumb_br_place, -1, 0, web_post_bl()) - shape += wall_brace(mini_thumb_bl_place, -1, 0, web_post_tl(), mini_thumb_bl_place, -1, 0, web_post_bl()) - # thumb, corners - shape += wall_brace(mini_thumb_br_place, -1, 0, web_post_bl(), mini_thumb_br_place, 0, -1, web_post_bl()) - shape += wall_brace(mini_thumb_bl_place, -1, 0, web_post_tl(), mini_thumb_bl_place, 0, 1, web_post_tl()) - # thumb, tweeners - shape += wall_brace(mini_thumb_mr_place, 0, -1, web_post_bl(), mini_thumb_br_place, 0, -1, web_post_br()) - shape += wall_brace(mini_thumb_bl_place, -1, 0, web_post_bl(), mini_thumb_br_place, -1, 0, web_post_tl()) - shape += wall_brace(mini_thumb_tr_place, 0, -1, mini_thumb_post_br(), (lambda sh: key_place(sh, 3, lastrow)), 0, -1, web_post_bl()) - - return shape - -def mini_thumb_connection(): - # clunky bit on the top left thumb connection (normal connectors don't work well) - shape = bottom_hull( - [ - left_key_place(sl.translate(wall_locate2(-1, 0))(web_post()), cornerrow, -1), - left_key_place(sl.translate(wall_locate3(-1, 0))(web_post()), cornerrow, -1), - mini_thumb_bl_place(sl.translate(wall_locate2(-0.3, 1))(web_post_tr())), - mini_thumb_bl_place(sl.translate(wall_locate3(-0.3, 1))(web_post_tr())), - ] - ) - - shape += sl.hull()( - [ - left_key_place(sl.translate(wall_locate2(-1, 0))(web_post()), cornerrow, -1), - left_key_place(sl.translate(wall_locate3(-1, 0))(web_post()), cornerrow, -1), - mini_thumb_bl_place(sl.translate(wall_locate2(-0.3, 1))(web_post_tr())), - mini_thumb_bl_place(sl.translate(wall_locate3(-0.3, 1))(web_post_tr())), - mini_thumb_tl_place(web_post_tl()), - ] - ) - - shape += sl.hull()( - [ - left_key_place(web_post(), cornerrow, -1), - left_key_place(sl.translate(wall_locate1(-1, 0))(web_post()), cornerrow, -1), - left_key_place(sl.translate(wall_locate2(-1, 0))(web_post()), cornerrow, -1), - left_key_place(sl.translate(wall_locate3(-1, 0))(web_post()), cornerrow, -1), - mini_thumb_tl_place(web_post_tl()), - ] - ) - - shape += sl.hull()( - [ - left_key_place(web_post(), cornerrow, -1), - left_key_place(sl.translate(wall_locate1(-1, 0))(web_post()), cornerrow, -1), - key_place(web_post_bl(), 0, cornerrow), - # key_place(sl.translate(wall_locate1(-1, 0))(web_post_bl()), 0, cornerrow), - mini_thumb_tl_place(web_post_tl()), - ] - ) - - shape += sl.hull()( - [ - mini_thumb_bl_place(web_post_tr()), - mini_thumb_bl_place(sl.translate(wall_locate1(-0.3, 1))(web_post_tr())), - mini_thumb_bl_place(sl.translate(wall_locate2(-0.3, 1))(web_post_tr())), - mini_thumb_bl_place(sl.translate(wall_locate3(-0.3, 1))(web_post_tr())), - mini_thumb_tl_place(web_post_tl()), - ] - ) - - return shape - - - -def carbonfet_thumb_walls(): - # thumb, walls - shape = wall_brace(carbonfet_thumb_mr_place, 0, -1, web_post_br(), carbonfet_thumb_tr_place, 0, -1, web_post_br()) - shape += wall_brace(carbonfet_thumb_mr_place, 0, -1, web_post_br(), carbonfet_thumb_mr_place, 0, -1.15, web_post_bl()) - shape += wall_brace(carbonfet_thumb_br_place, 0, -1, web_post_br(), carbonfet_thumb_br_place, 0, -1, web_post_bl()) - shape += wall_brace(carbonfet_thumb_bl_place, -.3, 1, thumb_post_tr(), carbonfet_thumb_bl_place, 0, 1, thumb_post_tl()) - shape += wall_brace(carbonfet_thumb_br_place, -1, 0, web_post_tl(), carbonfet_thumb_br_place, -1, 0, web_post_bl()) - shape += wall_brace(carbonfet_thumb_bl_place, -1, 0, thumb_post_tl(), carbonfet_thumb_bl_place, -1, 0, web_post_bl()) - # thumb, corners - shape += wall_brace(carbonfet_thumb_br_place, -1, 0, web_post_bl(), carbonfet_thumb_br_place, 0, -1, web_post_bl()) - shape += wall_brace(carbonfet_thumb_bl_place, -1, 0, thumb_post_tl(), carbonfet_thumb_bl_place, 0, 1, thumb_post_tl()) - # thumb, tweeners - shape += wall_brace(carbonfet_thumb_mr_place, 0, -1.15, web_post_bl(), carbonfet_thumb_br_place, 0, -1, web_post_br()) - # shape += wall_brace(thumb_ml_place, 0, 1, web_post_tl(), carbonfet_thumb_bl_place, 0, 1, web_post_tr()) - shape += wall_brace(carbonfet_thumb_bl_place, -1, 0, web_post_bl(), carbonfet_thumb_br_place, -1, 0, web_post_tl()) - shape += wall_brace(carbonfet_thumb_tr_place, 0, -1, web_post_br(), (lambda sh: key_place(sh, 3, lastrow)), 0, -1, web_post_bl()) - return shape - -def carbonfet_thumb_connection(): - # clunky bit on the top left thumb connection (normal connectors don't work well) - shape = bottom_hull( - [ - left_key_place(sl.translate(wall_locate2(-1, 0))(web_post()), cornerrow, -1), - left_key_place(sl.translate(wall_locate3(-1, 0))(web_post()), cornerrow, -1), - carbonfet_thumb_bl_place(sl.translate(wall_locate2(-0.3, 1))(thumb_post_tr())), - carbonfet_thumb_bl_place(sl.translate(wall_locate3(-0.3, 1))(thumb_post_tr())), - ] - ) - - shape += sl.hull()( - [ - left_key_place(sl.translate(wall_locate2(-1, 0))(web_post()), cornerrow, -1), - left_key_place(sl.translate(wall_locate3(-1, 0))(web_post()), cornerrow, -1), - carbonfet_thumb_bl_place(sl.translate(wall_locate2(-0.3, 1))(thumb_post_tr())), - carbonfet_thumb_bl_place(sl.translate(wall_locate3(-0.3, 1))(thumb_post_tr())), - carbonfet_thumb_ml_place(thumb_post_tl()), - ] - ) - - shape += sl.hull()( - [ - left_key_place(web_post(), cornerrow, -1), - left_key_place(sl.translate(wall_locate1(-1, 0))(web_post()), cornerrow, -1), - left_key_place(sl.translate(wall_locate2(-1, 0))(web_post()), cornerrow, -1), - left_key_place(sl.translate(wall_locate3(-1, 0))(web_post()), cornerrow, -1), - carbonfet_thumb_ml_place(thumb_post_tl()), - ] - ) - - shape += sl.hull()( - [ - left_key_place(web_post(), cornerrow, -1), - left_key_place(sl.translate(wall_locate1(-1, 0))(web_post()), cornerrow, -1), - key_place(web_post_bl(), 0, cornerrow), - # key_place(sl.translate(wall_locate1(-1, 0))(web_post_bl()), 0, cornerrow), - carbonfet_thumb_ml_place(thumb_post_tl()), - ] - ) - - shape += sl.hull()( - [ - carbonfet_thumb_bl_place(thumb_post_tr()), - carbonfet_thumb_bl_place(sl.translate(wall_locate1(-0.3, 1))(thumb_post_tr())), - carbonfet_thumb_bl_place(sl.translate(wall_locate2(-0.3, 1))(thumb_post_tr())), - carbonfet_thumb_bl_place(sl.translate(wall_locate3(-0.3, 1))(thumb_post_tr())), - carbonfet_thumb_ml_place(thumb_post_tl()), - ] - ) - - return shape - - - -def case_walls(): - return ( - back_wall() - + left_wall() - + right_wall() - + front_wall() - + thumb_walls() - + thumb_connection() - ) - - -rj9_start = list( - np.array([0, -3, 0]) - + np.array( - key_position( - list(np.array(wall_locate3(0, 1)) + np.array([0, (mount_height / 2), 0])), - 0, - 0, - ) - ) -) - -rj9_position = [rj9_start[0], rj9_start[1], 11] - - -def rj9_cube(): - return sl.cube([14.78, 13, 22.38], center=True) - - -def rj9_space(): - return sl.translate(rj9_position)(rj9_cube()) - - -def rj9_holder(): - shape = sl.union()( - sl.translate([0, 2, 0])(sl.cube([10.78, 9, 18.38], center=True)), - sl.translate([0, 0, 5])(sl.cube([10.78, 13, 5], center=True)), - ) - shape = sl.difference()(rj9_cube(), shape) - shape = sl.translate(rj9_position)(shape) - return shape - - -usb_holder_position = key_position( - list(np.array(wall_locate2(0, 1)) + np.array([0, (mount_height / 2), 0])), 1, 0 -) -usb_holder_size = [6.5, 10.0, 13.6] -usb_holder_thickness = 4 - - -def usb_holder(): - shape = sl.cube( - [ - usb_holder_size[0] + usb_holder_thickness, - usb_holder_size[1], - usb_holder_size[2] + usb_holder_thickness, - ], - center=True, - ) - shape = sl.translate( - [ - usb_holder_position[0], - usb_holder_position[1], - (usb_holder_size[2] + usb_holder_thickness) / 2, - ] - )(shape) - return shape - - -def usb_holder_hole(): - shape = sl.cube(usb_holder_size, center=True) - shape = sl.translate( - [ - usb_holder_position[0], - usb_holder_position[1], - (usb_holder_size[2] + usb_holder_thickness) / 2, - ] - )(shape) - return shape - - -external_start = list( - np.array([external_holder_width / 2, 0, 0]) - + np.array( - key_position( - list(np.array(wall_locate3(0, 1)) + np.array([0, (mount_height / 2), 0])), - 0, - 0, - ) - ) -) - - -def external_mount_hole(): - print('external_mount_hole()') - shape = sl.cube((external_holder_width, 20.0, external_holder_height), center=True) - shape = sl.translate( - ( - external_start[0] + external_holder_xoffset, - external_start[1], - external_holder_height / 2 - ) - )(shape) - return shape - - -def oled_sliding_mount_frame(): - mount_ext_width = oled_mount_width + 2 * oled_mount_rim - mount_ext_height = ( - oled_mount_height + 2 * oled_edge_overlap_end - + oled_edge_overlap_connector + oled_edge_overlap_clearance - + 2 * oled_mount_rim - ) - mount_ext_up_height = oled_mount_height + 2 * oled_mount_rim - top_hole_start = -mount_ext_height / 2.0 + oled_mount_rim + oled_edge_overlap_end + oled_edge_overlap_connector - top_hole_length = oled_mount_height - hole = sl.cube([mount_ext_width, mount_ext_up_height, oled_mount_cut_depth + .01], center=True) - hole = sl.translate([0., top_hole_start + top_hole_length / 2, 0.])(hole) - hole_down = sl.cube([mount_ext_width, mount_ext_height, oled_mount_depth + oled_mount_cut_depth / 2], - center=True) - hole_down = sl.translate([0., 0., -oled_mount_cut_depth / 4])(hole_down) - hole += hole_down - - shape = sl.cube([mount_ext_width, mount_ext_height, oled_mount_depth], center=True) - - conn_hole_start = -mount_ext_height / 2.0 + oled_mount_rim - conn_hole_length = ( - oled_edge_overlap_end + oled_edge_overlap_connector - + oled_edge_overlap_clearance + oled_thickness - ) - conn_hole = sl.cube([oled_mount_width, conn_hole_length + .01, oled_mount_depth], center=True) - conn_hole = sl.translate([ - 0, - conn_hole_start + conn_hole_length / 2, - -oled_edge_overlap_thickness - ])(conn_hole) - - end_hole_length = ( - oled_edge_overlap_end + oled_edge_overlap_clearance - ) - end_hole_start = mount_ext_height / 2.0 - oled_mount_rim - end_hole_length - end_hole = sl.cube([oled_mount_width, end_hole_length + .01, oled_mount_depth], center=True) - end_hole = sl.translate([ - 0, - end_hole_start + end_hole_length / 2, - -oled_edge_overlap_thickness - ])(end_hole) - - top_hole_start = -mount_ext_height / 2.0 + oled_mount_rim + oled_edge_overlap_end + oled_edge_overlap_connector - top_hole_length = oled_mount_height - top_hole = sl.cube( - [oled_mount_width, top_hole_length, oled_edge_overlap_thickness + oled_thickness - oled_edge_chamfer], - center=True) - top_hole = sl.translate([ - 0, - top_hole_start + top_hole_length / 2, - (oled_mount_depth - oled_edge_overlap_thickness - oled_thickness - oled_edge_chamfer) / 2.0 - ])(top_hole) - - top_chamfer_1 = sl.cube([ - oled_mount_width, - top_hole_length, - 0.01 - ], center=True) - top_chamfer_2 = sl.cube([ - oled_mount_width + 2 * oled_edge_chamfer, - top_hole_length + 2 * oled_edge_chamfer, - 0.01 - ], center=True) - top_chamfer_1 = sl.translate([ - 0, - 0, - -oled_edge_chamfer - .05 - ])(top_chamfer_1) - top_chamfer_1 = sl.hull()(top_chamfer_1, top_chamfer_2) - - top_chamfer_1 = sl.translate([ - 0, - top_hole_start + top_hole_length / 2, - oled_mount_depth / 2.0 + .05 - ])(top_chamfer_1) - top_hole += top_chamfer_1 - - shape = sl.difference()(shape, conn_hole, top_hole, end_hole) - - shape = sl.rotate(oled_mount_rotation_xyz)(shape) - shape = sl.translate( - ( - oled_mount_location_xyz[0], - oled_mount_location_xyz[1], - oled_mount_location_xyz[2], - ) - )(shape) - - hole = sl.rotate(oled_mount_rotation_xyz)(hole) - hole = sl.translate( - ( - oled_mount_location_xyz[0], - oled_mount_location_xyz[1], - oled_mount_location_xyz[2], - ) - )(hole) - return hole, shape - - -def oled_clip_mount_frame(): - mount_ext_width = oled_mount_width + 2 * oled_mount_rim - mount_ext_height = ( - oled_mount_height + 2 * oled_clip_thickness - + 2 * oled_clip_undercut + 2 * oled_clip_overhang + 2 * oled_mount_rim - ) - hole = sl.cube([mount_ext_width, mount_ext_height, oled_mount_cut_depth + .01], center=True) - - shape = sl.cube([mount_ext_width, mount_ext_height, oled_mount_depth], center=True) - shape -= sl.cube([oled_mount_width, oled_mount_height, oled_mount_depth + .1], center=True) - - clip_slot = sl.cube([ - oled_clip_width + 2 * oled_clip_width_clearance, - oled_mount_height + 2 * oled_clip_thickness + 2 * oled_clip_overhang, - oled_mount_depth + .1], center=True) - - shape -= clip_slot - - clip_undercut = sl.cube([ - oled_clip_width + 2 * oled_clip_width_clearance, - oled_mount_height + 2 * oled_clip_thickness + 2 * oled_clip_overhang + 2 * oled_clip_undercut, - oled_mount_depth + .1], center=True) - - clip_undercut = sl.translate((0., 0., oled_clip_undercut_thickness))(clip_undercut) - shape -= clip_undercut - - plate = sl.cube([ - oled_mount_width + .1, - oled_mount_height - 2 * oled_mount_connector_hole, - oled_mount_depth - oled_thickness], center=True) - plate = sl.translate((0., 0., -oled_thickness / 2.0))(plate) - shape += plate - - shape = sl.rotate(oled_mount_rotation_xyz)(shape) - shape = sl.translate( - ( - oled_mount_location_xyz[0], - oled_mount_location_xyz[1], - oled_mount_location_xyz[2], - ) - )(shape) - - hole = sl.rotate(oled_mount_rotation_xyz)(hole) - hole = sl.translate( - ( - oled_mount_location_xyz[0], - oled_mount_location_xyz[1], - oled_mount_location_xyz[2], - ) - )(hole) - - return hole, shape - - -def oled_clip(): - mount_ext_width = oled_mount_width + 2 * oled_mount_rim - mount_ext_height = ( - oled_mount_height + 2 * oled_clip_thickness + 2 * oled_clip_overhang - + 2 * oled_clip_undercut + 2 * oled_mount_rim - ) - - oled_leg_depth = oled_mount_depth + oled_clip_z_gap - - shape = sl.cube([mount_ext_width - .1, mount_ext_height - .1, oled_mount_bezel_thickness], center=True) - shape = sl.translate((0., 0., oled_mount_bezel_thickness / 2.))(shape) - - hole_1 = sl.cube([ - oled_screen_width + 2 * oled_mount_bezel_chamfer, - oled_screen_length + 2 * oled_mount_bezel_chamfer, - .01 - ], center=True) - hole_2 = sl.cube([oled_screen_width, oled_screen_length, 2.05 * oled_mount_bezel_thickness], center=True) - hole = sl.hull()(hole_1, hole_2) - - shape -= sl.translate((0., 0., oled_mount_bezel_thickness))(hole) - - clip_leg = sl.cube([oled_clip_width, oled_clip_thickness, oled_leg_depth], center=True) - clip_leg = sl.translate(( - 0., - 0., - # (oled_mount_height+2*oled_clip_overhang+oled_clip_thickness)/2, - -oled_leg_depth / 2. - ))(clip_leg) - - latch_1 = sl.cube([ - oled_clip_width, - oled_clip_overhang + oled_clip_thickness, - .01 - ], center=True) - latch_2 = sl.cube([ - oled_clip_width, - oled_clip_thickness / 2, - oled_clip_extension - ], center=True) - latch_2 = sl.translate(( - 0., - -(-oled_clip_thickness / 2 + oled_clip_thickness + oled_clip_overhang) / 2, - -oled_clip_extension / 2 - ))(latch_2) - latch = sl.hull()(latch_1, latch_2) - latch = sl.translate(( - 0., - oled_clip_overhang / 2, - -oled_leg_depth - ))(latch) - - clip_leg += latch - - clip_leg = sl.translate(( - 0., - (oled_mount_height + 2 * oled_clip_overhang + oled_clip_thickness) / 2 - oled_clip_y_gap, - 0. - ))(clip_leg) - - shape += clip_leg - shape += sl.mirror((0., 1., 0.))(clip_leg) - - return shape - - -def oled_undercut_mount_frame(): - mount_ext_width = oled_mount_width + 2 * oled_mount_rim - mount_ext_height = oled_mount_height + 2 * oled_mount_rim - hole = sl.cube([mount_ext_width, mount_ext_height, oled_mount_cut_depth + .01], center=True) - - shape = sl.cube([mount_ext_width, mount_ext_height, oled_mount_depth], center=True) - shape = sl.difference()( - shape, - sl.cube([oled_mount_width, oled_mount_height, oled_mount_depth + .1], center=True) - ) - undercut = sl.cube([ - oled_mount_width + 2 * oled_mount_undercut, - oled_mount_height + 2 * oled_mount_undercut, - oled_mount_depth], center=True) - undercut = sl.translate((0., 0., -oled_mount_undercut_thickness))(undercut) - shape = sl.difference()(shape, undercut) - - shape = sl.rotate(oled_mount_rotation_xyz)(shape) - shape = sl.translate( - ( - oled_mount_location_xyz[0], - oled_mount_location_xyz[1], - oled_mount_location_xyz[2], - ) - )(shape) - - hole = sl.rotate(oled_mount_rotation_xyz)(hole) - hole = sl.translate( - ( - oled_mount_location_xyz[0], - oled_mount_location_xyz[1], - oled_mount_location_xyz[2], - ) - )(hole) - - return hole, shape - - -teensy_width = 20 -teensy_height = 12 -teensy_length = 33 -teensy2_length = 53 -teensy_pcb_thickness = 2 -teensy_holder_width = 7 + teensy_pcb_thickness -teensy_holder_height = 6 + teensy_width -teensy_offset_height = 5 -teensy_holder_top_length = 18 -teensy_top_xy = key_position(wall_locate3(-1, 0), 0, centerrow - 1) -teensy_bot_xy = key_position(wall_locate3(-1, 0), 0, centerrow + 1) -teensy_holder_length = teensy_top_xy[1] - teensy_bot_xy[1] -teensy_holder_offset = -teensy_holder_length / 2 -teensy_holder_top_offset = (teensy_holder_top_length / 2) - teensy_holder_length - - -def teensy_holder(): - s1 = sl.cube([3, teensy_holder_length, 6 + teensy_width], center=True) - s1 = sl.translate([1.5, teensy_holder_offset, 0])(s1) - - s2 = sl.cube([teensy_pcb_thickness, teensy_holder_length, 3], center=True) - s2 = sl.translate( - [ - (teensy_pcb_thickness / 2) + 3, - teensy_holder_offset, - -1.5 - (teensy_width / 2), - ] - )(s2) - - s3 = sl.cube([teensy_pcb_thickness, teensy_holder_top_length, 3], center=True) - s3 = sl.translate( - [ - (teensy_pcb_thickness / 2) + 3, - teensy_holder_top_offset, - 1.5 + (teensy_width / 2), - ] - )(s3) - - s4 = sl.cube([4, teensy_holder_top_length, 4], center=True) - s4 = sl.translate( - [teensy_pcb_thickness + 5, teensy_holder_top_offset, 1 + (teensy_width / 2)] - )(s4) - - shape = sl.union()(s1, s2, s3, s4) - - shape = sl.translate([-teensy_holder_width, 0, 0])(shape) - shape = sl.translate([-1.4, 0, 0])(shape) - shape = sl.translate( - [teensy_top_xy[0], teensy_top_xy[1] - 1, (6 + teensy_width) / 2] - )(shape) - - return shape - - -def screw_insert_shape(bottom_radius, top_radius, height): - shape = sl.union()( - sl.cylinder(r1=bottom_radius, r2=top_radius, h=height, center=True), - sl.translate([0, 0, (height / 2)])(sl.sphere(top_radius)), - ) - return shape - - -def screw_insert(column, row, bottom_radius, top_radius, height): - shift_right = column == lastcol - shift_left = column == 0 - shift_up = (not (shift_right or shift_left)) and (row == 0) - shift_down = (not (shift_right or shift_left)) and (row >= lastrow) - - if screws_offset == 'INSIDE': - # print('Shift Inside') - shift_left_adjust = wall_base_x_thickness - shift_right_adjust = -wall_base_x_thickness/2 - shift_down_adjust = -wall_base_y_thickness/2 - shift_up_adjust = -wall_base_y_thickness/3 - - elif screws_offset == 'OUTSIDE': - print('Shift Outside') - shift_left_adjust = 0 - shift_right_adjust = wall_base_x_thickness/2 - shift_down_adjust = wall_base_y_thickness*2/3 - shift_up_adjust = wall_base_y_thickness*2/3 - - else: - # print('Shift Origin') - shift_left_adjust = 0 - shift_right_adjust = 0 - shift_down_adjust = 0 - shift_up_adjust = 0 - - if shift_up: - position = key_position( - list(np.array(wall_locate2(0, 1)) + np.array([0, (mount_height / 2) + shift_up_adjust, 0])), - column, - row, - ) - elif shift_down: - position = key_position( - list(np.array(wall_locate2(0, -1)) - np.array([0, (mount_height / 2) + shift_down_adjust, 0])), - column, - row, - ) - elif shift_left: - position = list( - np.array(left_key_position(row, 0)) + np.array(wall_locate3(-1, 0)) + np.array((shift_left_adjust,0,0)) - ) - else: - position = key_position( - list(np.array(wall_locate2(1, 0)) + np.array([(mount_height / 2), 0, 0]) + np.array((shift_right_adjust,0,0)) - ), - column, - row, - ) - - # add z height below 0 due to 0 thickness skin covering the hole. - shape = screw_insert_shape(bottom_radius, top_radius, height + 5) - shape = sl.translate((position[0], position[1], height / 2 - 2.5))(shape) - - return shape - - -def screw_insert_all_shapes(bottom_radius, top_radius, height): - shape = sl.union()( - screw_insert(0, 0, bottom_radius, top_radius, height), - screw_insert(0, lastrow - 1, bottom_radius, top_radius, height), - screw_insert(3, lastrow, bottom_radius, top_radius, height), - screw_insert(3, 0, bottom_radius, top_radius, height), - screw_insert(lastcol, 0, bottom_radius, top_radius, height), - screw_insert(lastcol, lastrow - 1, bottom_radius, top_radius, height), - ) - - return shape - - -screw_insert_height = 3.8 -screw_insert_bottom_radius = 5.31 / 2 -screw_insert_top_radius = 5.1 / 2 -screw_insert_holes = screw_insert_all_shapes( - screw_insert_bottom_radius, screw_insert_top_radius, screw_insert_height -) -screw_insert_outers = screw_insert_all_shapes( - screw_insert_bottom_radius + 1.6, - screw_insert_top_radius + 1.6, - screw_insert_height + 1.5, -) -screw_insert_screw_holes = screw_insert_all_shapes(1.7, 1.7, 350) - -wire_post_height = 7 -wire_post_overhang = 3.5 -wire_post_diameter = 2.6 - - -def wire_post(direction, offset): - s1 = sl.cube( - [wire_post_diameter, wire_post_diameter, wire_post_height], center=True - ) - s1 = sl.translate([0, -wire_post_diameter * 0.5 * direction, 0])(s1) - - s2 = sl.cube( - [wire_post_diameter, wire_post_overhang, wire_post_diameter], center=True - ) - s2 = sl.translate( - [0, -wire_post_overhang * 0.5 * direction, -wire_post_height / 2] - )(s2) - - shape = sl.union()(s1, s2) - shape = sl.translate([0, -offset, (-wire_post_height / 2) + 3])(shape) - shape = sl.rotate(-alpha / 2, [1, 0, 0])(shape) - shape = sl.translate([3, -mount_height / 2, 0])(shape) - - return shape - - -def wire_posts(): - shape = thumb_ml_place(sl.translate([-5, 0, -2])(wire_post(1, 0))) - shape += thumb_ml_place(sl.translate([0, 0, -2.5])(wire_post(-1, 6))) - shape += thumb_ml_place(sl.translate([5, 0, -2])(wire_post(1, 0))) - - for column in range(lastcol): - for row in range(lastrow - 1): - shape += sl.union()( - key_place(sl.translate([-5, 0, 0])(wire_post(1, 0)), column, row), - key_place(sl.translate([0, 0, 0])(wire_post(-1, 6)), column, row), - key_place(sl.translate([5, 0, 0])(wire_post(1, 0)), column, row), - ) - return shape - - -def model_side(side="right"): - shape = sl.union()(key_holes(side=side), connectors(), thumb(side=side), thumb_connectors(), ) - pre_sub = [] - adders = [] - post_sub = [screw_insert_holes()] - - if controller_mount_type in ['RJ9_USB_TEENSY']: - adders.append(teensy_holder()) - - if controller_mount_type in ['RJ9_USB_TEENSY', 'RJ9_USB_WALL']: - adders.append(usb_holder()) - post_sub.append(usb_holder_hole()) - - if controller_mount_type in ['RJ9_USB_TEENSY', 'RJ9_USB_WALL']: - pre_sub.append(rj9_space()) - adders.append(rj9_holder()) - - if controller_mount_type in ['EXTERNAL']: - post_sub.append(external_mount_hole()) - - s2 = sl.union()(case_walls(), screw_insert_outers()) - s2 = sl.difference()(s2, *pre_sub) - s2 = sl.union()(s2, *adders) - shape = sl.union()(shape, s2) - - shape -= sl.translate([0, 0, -20])(sl.cube([350, 350, 40], center=True)) - - shape = sl.difference()(shape, *post_sub) - - if oled_mount_type == "UNDERCUT": - hole, frame = oled_undercut_mount_frame() - shape -= hole - shape += frame - - elif oled_mount_type == "SLIDING": - hole, frame = oled_sliding_mount_frame() - shape -= hole - shape += frame - - elif oled_mount_type == "CLIP": - hole, frame = oled_clip_mount_frame() - shape -= hole - shape += frame - - if side == "left": - shape = sl.mirror([-1, 0, 0])(shape) - - return shape - - -mod_r = model_side(side="right") - -sl.scad_render_to_file(mod_r, path.join(r"..", "things", save_dir, config_name + r"_right.scad")) - -if symmetry == "asymmetric": - mod_l = model_side(side="left") - sl.scad_render_to_file( - mod_l, path.join(r"..", "things", save_dir, config_name + r"_left.scad") - ) -else: - sl.scad_render_to_file( - sl.mirror([-1, 0, 0])(mod_r), path.join(r"..", "things", save_dir, config_name + r"_left.scad") - ) - - -def baseplate(): - shape = sl.union()( - case_walls(), - screw_insert_outers(), - ) - - tool = sl.translate([0, 0, -10])(screw_insert_screw_holes()) - - shape = shape - tool - - shape = sl.translate([0, 0, -0.01])(shape) - - return sl.projection(cut=True)(shape) - - -sl.scad_render_to_file(baseplate(), path.join(r"..", "things", save_dir, config_name + r"_plate.scad")) - -if oled_mount_type == 'UNDERCUT': - sl.scad_render_to_file(oled_undercut_mount_frame()[1], path.join(r"..", "things", save_dir, config_name + r"_oled_undercut_test.scad")) - -if oled_mount_type == 'SLIDING': - sl.scad_render_to_file(oled_sliding_mount_frame()[1], path.join(r"..", "things", save_dir, config_name + r"_oled_sliding_test.scad")) - -if oled_mount_type == 'CLIP': - oled_mount_location_xyz = (0.0, 0.0, -oled_mount_depth / 2) - oled_mount_rotation_xyz = (0.0, 0.0, 0.0) - sl.scad_render_to_file(oled_clip(), path.join(r"..", "things", save_dir, config_name + r"_oled_clip.scad")) - sl.scad_render_to_file(oled_clip_mount_frame()[1], path.join(r"..", "things", save_dir, config_name + r"_oled_clip_test.scad")) - sl.scad_render_to_file(oled_clip_mount_frame()[1] + oled_clip(), - path.join(r"..", "things", save_dir, config_name + r"_oled_clip_assy_test.scad")) |